Bug#729157: xserver-xorg-video-intel: After Resume Mouse is not working anymore [GMA X3500/82G35]
Package: xserver-xorg-video-intel
Version: 2:2.21.15-1+b2
Severity: normal
Dear Maintainer,
after upgrading from wheezy to jessie, I have the problem, that after
resume the mouse is not available anymore. As a workaround I can
switch to a virtual console and back, then the mouse is back.
I send in a follow-up the Xorg.0.log
Thanks,
Rainer
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Dec 29 2007 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2265256 Oct 8 23:49 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2982] (rev 03)
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 66 Aug 25 2010 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
#Section "Device"
# Option "DPI" "96 x 96"
#EndSection
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 3.10-3-686-pae (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 23780 Jun 9 23:08 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 24229 Nov 6 17:00 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 23350 Nov 9 16:30 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 54354 Nov 9 17:59 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 18.189]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 18.189] X Protocol Version 11, Revision 0
[ 18.189] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 18.189] Current Operating System: Linux blackbox 3.10-3-686-pae #1 SMP Debian 3.10.11-1 (2013-09-10) i686
[ 18.189] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10-3-686-pae root=UUID=3bfc8f7b-628c-425d-af32-269e98a8f36e ro quiet elevator=noop rootflags=noatime,discard,data=ordered,errors=remount-ro drm.debug=6
[ 18.189] Build Date: 08 October 2013 09:42:53PM
[ 18.189] xorg-server 2:1.14.3-4 (Julien Cristau <jcristau@debian.org>)
[ 18.189] Current version of pixman: 0.30.2
[ 18.189] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.189] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.189] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 9 16:33:30 2013
[ 18.190] (==) Using config file: "/etc/X11/xorg.conf"
[ 18.190] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.191] (==) No Layout section. Using the first Screen section.
[ 18.191] (==) No screen section available. Using defaults.
[ 18.191] (**) |-->Screen "Default Screen Section" (0)
[ 18.191] (**) | |-->Monitor "<default monitor>"
[ 18.191] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.192] (==) Automatically adding devices
[ 18.192] (==) Automatically enabling devices
[ 18.192] (==) Automatically adding GPU devices
[ 18.193] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 18.193] Entry deleted from font path.
[ 18.193] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 18.193] Entry deleted from font path.
[ 18.193] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 18.193] Entry deleted from font path.
[ 18.193] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 18.193] Entry deleted from font path.
[ 18.193] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 18.193] Entry deleted from font path.
[ 18.193] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 18.193] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.193] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.193] (II) Loader magic: 0xb777a6a0
[ 18.194] (II) Module ABI versions:
[ 18.194] X.Org ANSI C Emulation: 0.4
[ 18.194] X.Org Video Driver: 14.1
[ 18.194] X.Org XInput driver : 19.1
[ 18.194] X.Org Server Extension : 7.0
[ 18.194] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.195] (--) PCI:*(0:0:2:0) 8086:2982:1043:8276 rev 3, Mem @ 0xfe800000/1048576, 0xd0000000/268435456, I/O @ 0x0000cc00/8
[ 18.195] (--) PCI: (0:0:2:1) 8086:2983:1043:8276 rev 3, Mem @ 0xfe900000/1048576
[ 18.195] (II) Open ACPI successful (/var/run/acpid.socket)
[ 18.196] Initializing built-in extension Generic Event Extension
[ 18.196] Initializing built-in extension SHAPE
[ 18.196] Initializing built-in extension MIT-SHM
[ 18.196] Initializing built-in extension XInputExtension
[ 18.196] Initializing built-in extension XTEST
[ 18.196] Initializing built-in extension BIG-REQUESTS
[ 18.196] Initializing built-in extension SYNC
[ 18.196] Initializing built-in extension XKEYBOARD
[ 18.196] Initializing built-in extension XC-MISC
[ 18.196] Initializing built-in extension SECURITY
[ 18.196] Initializing built-in extension XINERAMA
[ 18.196] Initializing built-in extension XFIXES
[ 18.196] Initializing built-in extension RENDER
[ 18.196] Initializing built-in extension RANDR
[ 18.196] Initializing built-in extension COMPOSITE
[ 18.196] Initializing built-in extension DAMAGE
[ 18.196] Initializing built-in extension MIT-SCREEN-SAVER
[ 18.196] Initializing built-in extension DOUBLE-BUFFER
[ 18.196] Initializing built-in extension RECORD
[ 18.196] Initializing built-in extension DPMS
[ 18.196] Initializing built-in extension X-Resource
[ 18.196] Initializing built-in extension XVideo
[ 18.196] Initializing built-in extension XVideo-MotionCompensation
[ 18.196] Initializing built-in extension SELinux
[ 18.196] Initializing built-in extension XFree86-VidModeExtension
[ 18.196] Initializing built-in extension XFree86-DGA
[ 18.196] Initializing built-in extension XFree86-DRI
[ 18.196] Initializing built-in extension DRI2
[ 18.196] (II) LoadModule: "glx"
[ 18.196] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.199] (II) Module glx: vendor="X.Org Foundation"
[ 18.199] compiled for 1.14.3, module version = 1.0.0
[ 18.199] ABI class: X.Org Server Extension, version 7.0
[ 18.199] (==) AIGLX enabled
[ 18.199] Loading extension GLX
[ 18.199] (==) Matched intel as autoconfigured driver 0
[ 18.199] (==) Matched intel as autoconfigured driver 1
[ 18.199] (==) Matched vesa as autoconfigured driver 2
[ 18.199] (==) Matched modesetting as autoconfigured driver 3
[ 18.199] (==) Matched fbdev as autoconfigured driver 4
[ 18.199] (==) Assigned the driver to the xf86ConfigLayout
[ 18.199] (II) LoadModule: "intel"
[ 18.199] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.203] (II) Module intel: vendor="X.Org Foundation"
[ 18.203] compiled for 1.14.3, module version = 2.21.15
[ 18.203] Module class: X.Org Video Driver
[ 18.203] ABI class: X.Org Video Driver, version 14.1
[ 18.203] (II) LoadModule: "vesa"
[ 18.203] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.204] (II) Module vesa: vendor="X.Org Foundation"
[ 18.204] compiled for 1.14.3, module version = 2.3.3
[ 18.204] Module class: X.Org Video Driver
[ 18.204] ABI class: X.Org Video Driver, version 14.1
[ 18.204] (II) LoadModule: "modesetting"
[ 18.204] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.204] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.204] compiled for 1.14.3, module version = 0.8.0
[ 18.204] Module class: X.Org Video Driver
[ 18.204] ABI class: X.Org Video Driver, version 14.1
[ 18.204] (II) LoadModule: "fbdev"
[ 18.205] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 18.205] (II) Module fbdev: vendor="X.Org Foundation"
[ 18.205] compiled for 1.14.3, module version = 0.4.4
[ 18.205] Module class: X.Org Video Driver
[ 18.205] ABI class: X.Org Video Driver, version 14.1
[ 18.205] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 18.205] (II) VESA: driver for VESA chipsets: vesa
[ 18.205] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.205] (II) FBDEV: driver for framebuffer: fbdev
[ 18.205] (++) using VT number 7
[ 18.213] (WW) Falling back to old probe method for vesa
[ 18.213] (WW) Falling back to old probe method for modesetting
[ 18.213] (WW) Falling back to old probe method for fbdev
[ 18.213] (II) Loading sub module "fbdevhw"
[ 18.213] (II) LoadModule: "fbdevhw"
[ 18.213] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 18.214] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 18.214] compiled for 1.14.3, module version = 0.0.2
[ 18.214] ABI class: X.Org Video Driver, version 14.1
[ 18.214] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.214] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 18.214] (==) intel(0): RGB weight 888
[ 18.214] (==) intel(0): Default visual is TrueColor
[ 18.214] (--) intel(0): Integrated Graphics Chipset: Intel(R) G35
[ 18.214] (**) intel(0): Relaxed fencing enabled
[ 18.214] (**) intel(0): Wait on SwapBuffers? enabled
[ 18.214] (**) intel(0): Triple buffering? enabled
[ 18.214] (**) intel(0): Framebuffer tiled
[ 18.214] (**) intel(0): Pixmaps tiled
[ 18.214] (**) intel(0): 3D buffers tiled
[ 18.215] (**) intel(0): SwapBuffers wait enabled
[ 18.215] (==) intel(0): video overlay key set to 0x101fe
[ 18.236] (II) intel(0): Output VGA1 has no monitor section
[ 18.302] (II) intel(0): Output HDMI1 has no monitor section
[ 18.324] (II) intel(0): EDID for output VGA1
[ 18.399] (II) intel(0): EDID for output HDMI1
[ 18.399] (II) intel(0): Manufacturer: ENC Model: 1687 Serial#: 16843009
[ 18.399] (II) intel(0): Year: 2004 Week: 7
[ 18.399] (II) intel(0): EDID Version: 1.2
[ 18.399] (II) intel(0): Digital Display Input
[ 18.399] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 18.399] (II) intel(0): Gamma: 2.20
[ 18.399] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 18.399] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 18.399] (II) intel(0): First detailed timing is preferred mode
[ 18.399] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 18.399] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 18.399] (II) intel(0): Supported established timings:
[ 18.399] (II) intel(0): 720x400@70Hz
[ 18.399] (II) intel(0): 640x480@60Hz
[ 18.399] (II) intel(0): 800x600@60Hz
[ 18.399] (II) intel(0): 1024x768@60Hz
[ 18.399] (II) intel(0): Manufacturer's mask: 0
[ 18.399] (II) intel(0): Supported standard timings:
[ 18.399] (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 18.399] (II) intel(0): Supported detailed timing:
[ 18.399] (II) intel(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 18.399] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 18.399] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 18.399] (II) intel(0): Serial No: A6273024
[ 18.399] (II) intel(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 115 MHz
[ 18.399] (II) intel(0): Monitor name: L767
[ 18.399] (II) intel(0): EDID (in hex):
[ 18.399] (II) intel(0): 00ffffffffffff0015c3871601010101
[ 18.399] (II) intel(0): 070e010280261e78eaee95a3544c9926
[ 18.399] (II) intel(0): 0f5054a1080081800101010101010101
[ 18.399] (II) intel(0): 010101010101302a009851002a403070
[ 18.399] (II) intel(0): 1300782d1100001e000000ff00413632
[ 18.399] (II) intel(0): 37333032340a20202020000000fd003b
[ 18.399] (II) intel(0): 3d1f400b000a202020202020000000fc
[ 18.399] (II) intel(0): 004c3736370a2020202020202020005a
[ 18.399] (II) intel(0): Printing probed modes for output HDMI1
[ 18.399] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 18.399] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 18.399] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 18.399] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 18.399] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 18.399] (II) intel(0): Output VGA1 disconnected
[ 18.399] (II) intel(0): Output HDMI1 connected
[ 18.399] (II) intel(0): Using exact sizes for initial modes
[ 18.399] (II) intel(0): Output HDMI1 using initial mode 1280x1024
[ 18.399] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 18.399] (II) intel(0): Kernel page flipping support detected, enabling
[ 18.399] (==) intel(0): DPI set to (96, 96)
[ 18.399] (II) Loading sub module "fb"
[ 18.399] (II) LoadModule: "fb"
[ 18.399] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.400] (II) Module fb: vendor="X.Org Foundation"
[ 18.400] compiled for 1.14.3, module version = 1.0.0
[ 18.400] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.400] (II) Loading sub module "dri2"
[ 18.400] (II) LoadModule: "dri2"
[ 18.400] (II) Module "dri2" already built-in
[ 18.400] (II) UnloadModule: "vesa"
[ 18.400] (II) Unloading vesa
[ 18.400] (II) UnloadModule: "modesetting"
[ 18.400] (II) Unloading modesetting
[ 18.400] (II) UnloadModule: "fbdev"
[ 18.400] (II) Unloading fbdev
[ 18.400] (II) UnloadSubModule: "fbdevhw"
[ 18.400] (II) Unloading fbdevhw
[ 18.400] (==) Depth 24 pixmap format is 32 bpp
[ 18.401] (II) intel(0): [DRI2] Setup complete
[ 18.401] (II) intel(0): [DRI2] DRI driver: i965
[ 18.401] (II) intel(0): Allocated new frame buffer 1280x1024 stride 5120, tiled
[ 18.413] (II) UXA(0): Driver registered support for the following operations:
[ 18.413] (II) solid
[ 18.413] (II) copy
[ 18.413] (II) composite (RENDER acceleration)
[ 18.413] (II) put_image
[ 18.413] (II) get_image
[ 18.413] (==) intel(0): Backing store disabled
[ 18.413] (==) intel(0): Silken mouse enabled
[ 18.413] (II) intel(0): Initializing HW Cursor
[ 18.413] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 18.414] (==) intel(0): DPMS enabled
[ 18.414] (==) intel(0): Intel XvMC decoder enabled
[ 18.414] (II) intel(0): Set up textured video
[ 18.414] (II) intel(0): Set up overlay video
[ 18.414] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 18.414] (II) intel(0): direct rendering: DRI2 Enabled
[ 18.414] (==) intel(0): hotplug detection: "enabled"
[ 18.432] (--) RandR disabled
[ 18.440] (II) SELinux: Disabled on system
[ 18.458] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 18.458] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 18.458] (II) AIGLX: enabled GLX_ARB_create_context
[ 18.458] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 18.458] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 18.458] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 18.458] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 18.458] (II) AIGLX: Loaded and initialized i965
[ 18.458] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 18.458] (II) intel(0): Setting screen physical size to 338 x 270
[ 18.512] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 18.512] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.512] (II) LoadModule: "evdev"
[ 18.513] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 18.514] (II) Module evdev: vendor="X.Org Foundation"
[ 18.514] compiled for 1.14.3, module version = 2.8.2
[ 18.514] Module class: X.Org XInput Driver
[ 18.514] ABI class: X.Org XInput driver, version 19.1
[ 18.514] (II) Using input driver 'evdev' for 'Power Button'
[ 18.514] (**) Power Button: always reports core events
[ 18.514] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 18.514] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.514] (--) evdev: Power Button: Found keys
[ 18.514] (II) evdev: Power Button: Configuring as keyboard
[ 18.514] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 18.514] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 18.514] (**) Option "xkb_rules" "evdev"
[ 18.514] (**) Option "xkb_model" "pc105"
[ 18.514] (**) Option "xkb_layout" "us"
[ 18.515] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 18.515] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.515] (II) Using input driver 'evdev' for 'Power Button'
[ 18.515] (**) Power Button: always reports core events
[ 18.515] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 18.515] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.515] (--) evdev: Power Button: Found keys
[ 18.515] (II) evdev: Power Button: Configuring as keyboard
[ 18.515] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 18.515] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 18.515] (**) Option "xkb_rules" "evdev"
[ 18.515] (**) Option "xkb_model" "pc105"
[ 18.515] (**) Option "xkb_layout" "us"
[ 18.515] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 18.515] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 18.515] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 18.515] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 18.515] (**) Logitech USB Optical Mouse: always reports core events
[ 18.515] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[ 18.515] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b
[ 18.515] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 18.515] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 18.515] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 18.515] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 18.515] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 18.515] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 18.515] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 18.515] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.516] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/event1"
[ 18.516] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[ 18.516] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 18.516] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 18.516] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 18.516] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 18.516] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 18.516] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 18.516] (II) No input driver specified, ignoring this device.
[ 18.516] (II) This device may have been added with another device file.
[ 18.516] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 18.516] (II) No input driver specified, ignoring this device.
[ 18.516] (II) This device may have been added with another device file.
[ 18.516] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event10)
[ 18.516] (II) No input driver specified, ignoring this device.
[ 18.516] (II) This device may have been added with another device file.
[ 18.517] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event11)
[ 18.517] (II) No input driver specified, ignoring this device.
[ 18.517] (II) This device may have been added with another device file.
[ 18.517] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event12)
[ 18.517] (II) No input driver specified, ignoring this device.
[ 18.517] (II) This device may have been added with another device file.
[ 18.517] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event13)
[ 18.517] (II) No input driver specified, ignoring this device.
[ 18.517] (II) This device may have been added with another device file.
[ 18.517] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event14)
[ 18.517] (II) No input driver specified, ignoring this device.
[ 18.517] (II) This device may have been added with another device file.
[ 18.518] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event6)
[ 18.518] (II) No input driver specified, ignoring this device.
[ 18.518] (II) This device may have been added with another device file.
[ 18.518] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event7)
[ 18.518] (II) No input driver specified, ignoring this device.
[ 18.518] (II) This device may have been added with another device file.
[ 18.518] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event8)
[ 18.518] (II) No input driver specified, ignoring this device.
[ 18.518] (II) This device may have been added with another device file.
[ 18.518] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
[ 18.518] (II) No input driver specified, ignoring this device.
[ 18.518] (II) This device may have been added with another device file.
[ 18.519] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 18.519] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 18.519] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 18.519] (**) AT Translated Set 2 keyboard: always reports core events
[ 18.519] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 18.519] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 18.519] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 18.519] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 18.519] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 18.519] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 18.519] (**) Option "xkb_rules" "evdev"
[ 18.519] (**) Option "xkb_model" "pc105"
[ 18.519] (**) Option "xkb_layout" "us"
[ 18.519] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 18.519] (II) No input driver specified, ignoring this device.
[ 18.519] (II) This device may have been added with another device file.
[ 166.175] (II) intel(0): EDID vendor "ENC", prod id 5767
[ 166.175] (II) intel(0): Using EDID range info for horizontal sync
[ 166.175] (II) intel(0): Using EDID range info for vertical refresh
[ 166.175] (II) intel(0): Printing DDC gathered Modelines:
[ 166.175] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 166.175] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 166.175] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 166.175] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 166.175] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 3968.948] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3994.353] (II) Open ACPI successful (/var/run/acpid.socket)
[ 3994.353] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3994.450] (II) intel(0): EDID vendor "ENC", prod id 5767
[ 3994.450] (II) intel(0): Using hsync ranges from config file
[ 3994.450] (II) intel(0): Using vrefresh ranges from config file
[ 3994.450] (II) intel(0): Printing DDC gathered Modelines:
[ 3994.450] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 3994.450] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 3994.450] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 3994.450] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 3994.450] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 3994.450] setversion 1.4 failed
[ 4035.508] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 4037.484] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4037.484] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 4037.582] (II) intel(0): EDID vendor "ENC", prod id 5767
[ 4037.582] (II) intel(0): Using hsync ranges from config file
[ 4037.582] (II) intel(0): Using vrefresh ranges from config file
[ 4037.582] (II) intel(0): Printing DDC gathered Modelines:
[ 4037.582] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 4037.582] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4037.582] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4037.582] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4037.582] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4420.887] (II) intel(0): EDID vendor "ENC", prod id 5767
[ 4420.887] (II) intel(0): Using hsync ranges from config file
[ 4420.887] (II) intel(0): Using vrefresh ranges from config file
[ 4420.887] (II) intel(0): Printing DDC gathered Modelines:
[ 4420.887] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 4420.887] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4420.887] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4420.887] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4420.887] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4448.020] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 4448.516] (II) evdev: AT Translated Set 2 keyboard: Close
[ 4448.516] (II) UnloadModule: "evdev"
[ 4448.516] (II) evdev: Logitech USB Optical Mouse: Close
[ 4448.516] (II) UnloadModule: "evdev"
[ 4448.516] (II) evdev: Power Button: Close
[ 4448.516] (II) UnloadModule: "evdev"
[ 4448.516] (II) evdev: Power Button: Close
[ 4448.516] (II) UnloadModule: "evdev"
[ 4448.539] 12 XSELINUXs still allocated at reset
[ 4448.539] SCREEN: 0 objects of 196 bytes = 0 total bytes 0 private allocs
[ 4448.539] DEVICE: 0 objects of 64 bytes = 0 total bytes 0 private allocs
[ 4448.539] CLIENT: 0 objects of 152 bytes = 0 total bytes 0 private allocs
[ 4448.539] WINDOW: 0 objects of 28 bytes = 0 total bytes 0 private allocs
[ 4448.539] PIXMAP: 1 objects of 16 bytes = 16 total bytes 0 private allocs
[ 4448.539] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs
[ 4448.539] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs
[ 4448.539] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 4448.539] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 4448.539] TOTAL: 6 objects, 52 bytes, 0 allocs
[ 4448.539] 6 SELECTIONs still allocated at reset
[ 4448.539] WINDOW: 0 objects of 28 bytes = 0 total bytes 0 private allocs
[ 4448.539] PIXMAP: 1 objects of 16 bytes = 16 total bytes 0 private allocs
[ 4448.539] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs
[ 4448.539] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs
[ 4448.539] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 4448.539] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 4448.539] TOTAL: 6 objects, 52 bytes, 0 allocs
[ 4448.539] 1 PIXMAPs still allocated at reset
[ 4448.539] PIXMAP: 1 objects of 16 bytes = 16 total bytes 0 private allocs
[ 4448.539] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs
[ 4448.539] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs
[ 4448.539] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 4448.539] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 4448.539] TOTAL: 6 objects, 52 bytes, 0 allocs
[ 4448.539] 4 GCs still allocated at reset
[ 4448.539] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs
[ 4448.539] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs
[ 4448.539] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 4448.539] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 4448.539] TOTAL: 5 objects, 36 bytes, 0 allocs
[ 4448.539] 1 CURSORs still allocated at reset
[ 4448.539] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs
[ 4448.539] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 4448.539] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 4448.542] TOTAL: 1 objects, 4 bytes, 0 allocs
[ 4448.542] 1 CURSOR_BITSs still allocated at reset
[ 4448.542] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 4448.542] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 4448.542] TOTAL: 0 objects, 0 bytes, 0 allocs
[ 4448.543] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4448.543] (II) APM registered successfully
[ 4448.543] (II) intel(0): [DRI2] Setup complete
[ 4448.543] (II) intel(0): [DRI2] DRI driver: i965
[ 4448.543] (II) intel(0): Allocated new frame buffer 1280x1024 stride 5120, tiled
[ 4448.551] (II) UXA(0): Driver registered support for the following operations:
[ 4448.551] (II) solid
[ 4448.551] (II) copy
[ 4448.551] (II) composite (RENDER acceleration)
[ 4448.551] (II) put_image
[ 4448.551] (II) get_image
[ 4448.551] (II) intel(0): Initializing HW Cursor
[ 4448.551] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4448.551] (==) intel(0): DPMS enabled
[ 4448.551] (==) intel(0): Intel XvMC decoder enabled
[ 4448.551] (II) intel(0): Set up textured video
[ 4448.551] (II) intel(0): Set up overlay video
[ 4448.551] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 4448.551] (II) intel(0): direct rendering: DRI2 Enabled
[ 4448.551] (==) intel(0): hotplug detection: "enabled"
[ 4448.572] (--) RandR disabled
[ 4448.580] (II) SELinux: Disabled on system
[ 4448.584] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4448.584] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4448.584] (II) AIGLX: enabled GLX_ARB_create_context
[ 4448.584] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4448.584] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 4448.584] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4448.584] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4448.584] (II) AIGLX: Loaded and initialized i965
[ 4448.584] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4448.585] (II) intel(0): Setting screen physical size to 338 x 270
[ 4448.613] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 4448.613] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4448.613] (II) Using input driver 'evdev' for 'Power Button'
[ 4448.613] (**) Power Button: always reports core events
[ 4448.613] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 4448.613] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4448.613] (--) evdev: Power Button: Found keys
[ 4448.613] (II) evdev: Power Button: Configuring as keyboard
[ 4448.613] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 4448.613] (**) Option "xkb_rules" "evdev"
[ 4448.614] (**) Option "xkb_model" "pc105"
[ 4448.614] (**) Option "xkb_layout" "us"
[ 4448.614] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4448.614] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4448.614] (II) Using input driver 'evdev' for 'Power Button'
[ 4448.614] (**) Power Button: always reports core events
[ 4448.614] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 4448.614] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4448.614] (--) evdev: Power Button: Found keys
[ 4448.614] (II) evdev: Power Button: Configuring as keyboard
[ 4448.614] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 4448.614] (**) Option "xkb_rules" "evdev"
[ 4448.614] (**) Option "xkb_model" "pc105"
[ 4448.614] (**) Option "xkb_layout" "us"
[ 4448.614] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4448.614] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4448.614] setversion 1.4 failed
[ 4448.615] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 4448.615] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 4448.615] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 4448.615] (**) Logitech USB Optical Mouse: always reports core events
[ 4448.615] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[ 4448.615] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b
[ 4448.615] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 4448.615] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 4448.615] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 4448.615] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 4448.615] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 4448.615] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 4448.615] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 4448.615] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4448.615] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/event1"
[ 4448.615] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 4448.615] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 4448.615] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 4448.615] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 4448.615] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 4448.615] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 4448.615] (II) No input driver specified, ignoring this device.
[ 4448.615] (II) This device may have been added with another device file.
[ 4448.616] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 4448.616] (II) No input driver specified, ignoring this device.
[ 4448.616] (II) This device may have been added with another device file.
[ 4448.616] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event10)
[ 4448.616] (II) No input driver specified, ignoring this device.
[ 4448.616] (II) This device may have been added with another device file.
[ 4448.616] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event11)
[ 4448.616] (II) No input driver specified, ignoring this device.
[ 4448.616] (II) This device may have been added with another device file.
[ 4448.616] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event12)
[ 4448.616] (II) No input driver specified, ignoring this device.
[ 4448.616] (II) This device may have been added with another device file.
[ 4448.616] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event13)
[ 4448.616] (II) No input driver specified, ignoring this device.
[ 4448.617] (II) This device may have been added with another device file.
[ 4448.617] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event14)
[ 4448.617] (II) No input driver specified, ignoring this device.
[ 4448.617] (II) This device may have been added with another device file.
[ 4448.617] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event6)
[ 4448.617] (II) No input driver specified, ignoring this device.
[ 4448.617] (II) This device may have been added with another device file.
[ 4448.617] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event7)
[ 4448.617] (II) No input driver specified, ignoring this device.
[ 4448.617] (II) This device may have been added with another device file.
[ 4448.617] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event8)
[ 4448.617] (II) No input driver specified, ignoring this device.
[ 4448.617] (II) This device may have been added with another device file.
[ 4448.618] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
[ 4448.618] (II) No input driver specified, ignoring this device.
[ 4448.618] (II) This device may have been added with another device file.
[ 4448.618] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4448.618] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4448.618] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4448.618] (**) AT Translated Set 2 keyboard: always reports core events
[ 4448.618] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4448.618] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4448.618] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4448.618] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4448.618] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4448.618] (**) Option "xkb_rules" "evdev"
[ 4448.618] (**) Option "xkb_model" "pc105"
[ 4448.618] (**) Option "xkb_layout" "us"
[ 4448.619] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 4448.619] (II) No input driver specified, ignoring this device.
[ 4448.619] (II) This device may have been added with another device file.
[ 4473.248] (II) intel(0): EDID vendor "ENC", prod id 5767
[ 4473.248] (II) intel(0): Using hsync ranges from config file
[ 4473.248] (II) intel(0): Using vrefresh ranges from config file
[ 4473.248] (II) intel(0): Printing DDC gathered Modelines:
[ 4473.248] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 4473.248] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4473.248] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4473.248] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4473.248] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4505.108] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 4539.459] (II) evdev: AT Translated Set 2 keyboard: Close
[ 4539.459] (II) UnloadModule: "evdev"
[ 4539.459] (II) evdev: Logitech USB Optical Mouse: Close
[ 4539.459] (II) UnloadModule: "evdev"
[ 4539.459] (II) evdev: Power Button: Close
[ 4539.459] (II) UnloadModule: "evdev"
[ 4539.459] (II) evdev: Power Button: Close
[ 4539.459] (II) UnloadModule: "evdev"
[ 4539.481] 7 XSELINUXs still allocated at reset
[ 4539.481] SCREEN: 0 objects of 196 bytes = 0 total bytes 0 private allocs
[ 4539.481] DEVICE: 0 objects of 64 bytes = 0 total bytes 0 private allocs
[ 4539.481] CLIENT: 0 objects of 152 bytes = 0 total bytes 0 private allocs
[ 4539.481] WINDOW: 0 objects of 28 bytes = 0 total bytes 0 private allocs
[ 4539.481] PIXMAP: 2 objects of 16 bytes = 32 total bytes 0 private allocs
[ 4539.481] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs
[ 4539.481] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs
[ 4539.481] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 4539.481] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 4539.481] TOTAL: 7 objects, 68 bytes, 0 allocs
[ 4539.481] 2 PIXMAPs still allocated at reset
[ 4539.481] PIXMAP: 2 objects of 16 bytes = 32 total bytes 0 private allocs
[ 4539.481] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs
[ 4539.481] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs
[ 4539.481] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 4539.481] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 4539.481] TOTAL: 7 objects, 68 bytes, 0 allocs
[ 4539.481] 4 GCs still allocated at reset
[ 4539.481] GC: 4 objects of 8 bytes = 32 total bytes 0 private allocs
[ 4539.481] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs
[ 4539.481] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 4539.481] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 4539.481] TOTAL: 5 objects, 36 bytes, 0 allocs
[ 4539.481] 1 CURSORs still allocated at reset
[ 4539.481] CURSOR: 1 objects of 4 bytes = 4 total bytes 0 private allocs
[ 4539.481] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 4539.481] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 4539.481] TOTAL: 1 objects, 4 bytes, 0 allocs
[ 4539.483] 1 CURSOR_BITSs still allocated at reset
[ 4539.483] DBE_WINDOW: 0 objects of 12 bytes = 0 total bytes 0 private allocs
[ 4539.483] GLYPH: 0 objects of 4 bytes = 0 total bytes 0 private allocs
[ 4539.483] TOTAL: 0 objects, 0 bytes, 0 allocs
[ 4539.484] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4539.484] (II) APM registered successfully
[ 4539.484] (II) intel(0): [DRI2] Setup complete
[ 4539.484] (II) intel(0): [DRI2] DRI driver: i965
[ 4539.484] (II) intel(0): Allocated new frame buffer 1280x1024 stride 5120, tiled
[ 4539.491] (II) UXA(0): Driver registered support for the following operations:
[ 4539.491] (II) solid
[ 4539.491] (II) copy
[ 4539.491] (II) composite (RENDER acceleration)
[ 4539.491] (II) put_image
[ 4539.491] (II) get_image
[ 4539.491] (II) intel(0): Initializing HW Cursor
[ 4539.491] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4539.492] (==) intel(0): DPMS enabled
[ 4539.492] (==) intel(0): Intel XvMC decoder enabled
[ 4539.492] (II) intel(0): Set up textured video
[ 4539.492] (II) intel(0): Set up overlay video
[ 4539.492] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 4539.492] (II) intel(0): direct rendering: DRI2 Enabled
[ 4539.492] (==) intel(0): hotplug detection: "enabled"
[ 4539.512] (--) RandR disabled
[ 4539.519] (II) SELinux: Disabled on system
[ 4539.522] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4539.527] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4539.527] (II) AIGLX: enabled GLX_ARB_create_context
[ 4539.527] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4539.527] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 4539.527] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4539.527] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4539.527] (II) AIGLX: Loaded and initialized i965
[ 4539.527] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4539.528] (II) intel(0): Setting screen physical size to 338 x 270
[ 4539.557] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 4539.557] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4539.557] (II) Using input driver 'evdev' for 'Power Button'
[ 4539.557] (**) Power Button: always reports core events
[ 4539.557] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 4539.557] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4539.557] (--) evdev: Power Button: Found keys
[ 4539.557] (II) evdev: Power Button: Configuring as keyboard
[ 4539.557] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 4539.557] (**) Option "xkb_rules" "evdev"
[ 4539.557] (**) Option "xkb_model" "pc105"
[ 4539.557] (**) Option "xkb_layout" "us"
[ 4539.558] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4539.558] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4539.558] (II) Using input driver 'evdev' for 'Power Button'
[ 4539.558] (**) Power Button: always reports core events
[ 4539.558] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 4539.558] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4539.558] (--) evdev: Power Button: Found keys
[ 4539.558] (II) evdev: Power Button: Configuring as keyboard
[ 4539.558] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 4539.558] (**) Option "xkb_rules" "evdev"
[ 4539.558] (**) Option "xkb_model" "pc105"
[ 4539.558] (**) Option "xkb_layout" "us"
[ 4539.558] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4539.558] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4539.558] setversion 1.4 failed
[ 4539.559] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 4539.559] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 4539.559] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 4539.559] (**) Logitech USB Optical Mouse: always reports core events
[ 4539.559] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[ 4539.559] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b
[ 4539.559] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 4539.559] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 4539.559] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 4539.559] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 4539.559] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 4539.559] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 4539.559] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 4539.559] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4539.559] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/event1"
[ 4539.559] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 4539.559] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 4539.559] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 4539.559] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 4539.559] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 4539.559] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 4539.559] (II) No input driver specified, ignoring this device.
[ 4539.559] (II) This device may have been added with another device file.
[ 4539.559] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 4539.559] (II) No input driver specified, ignoring this device.
[ 4539.559] (II) This device may have been added with another device file.
[ 4539.560] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event10)
[ 4539.560] (II) No input driver specified, ignoring this device.
[ 4539.560] (II) This device may have been added with another device file.
[ 4539.560] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event11)
[ 4539.560] (II) No input driver specified, ignoring this device.
[ 4539.560] (II) This device may have been added with another device file.
[ 4539.560] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event12)
[ 4539.560] (II) No input driver specified, ignoring this device.
[ 4539.560] (II) This device may have been added with another device file.
[ 4539.561] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event13)
[ 4539.561] (II) No input driver specified, ignoring this device.
[ 4539.561] (II) This device may have been added with another device file.
[ 4539.561] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event14)
[ 4539.561] (II) No input driver specified, ignoring this device.
[ 4539.561] (II) This device may have been added with another device file.
[ 4539.561] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event6)
[ 4539.561] (II) No input driver specified, ignoring this device.
[ 4539.561] (II) This device may have been added with another device file.
[ 4539.561] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event7)
[ 4539.561] (II) No input driver specified, ignoring this device.
[ 4539.561] (II) This device may have been added with another device file.
[ 4539.562] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event8)
[ 4539.562] (II) No input driver specified, ignoring this device.
[ 4539.562] (II) This device may have been added with another device file.
[ 4539.562] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
[ 4539.562] (II) No input driver specified, ignoring this device.
[ 4539.562] (II) This device may have been added with another device file.
[ 4539.562] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4539.562] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4539.562] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4539.562] (**) AT Translated Set 2 keyboard: always reports core events
[ 4539.562] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4539.562] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4539.562] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4539.562] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4539.563] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4539.563] (**) Option "xkb_rules" "evdev"
[ 4539.563] (**) Option "xkb_model" "pc105"
[ 4539.563] (**) Option "xkb_layout" "us"
[ 4539.563] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 4539.563] (II) No input driver specified, ignoring this device.
[ 4539.563] (II) This device may have been added with another device file.
[ 4541.972] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 4602.248] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4602.248] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 4602.346] (II) intel(0): EDID vendor "ENC", prod id 5767
[ 4602.346] (II) intel(0): Using hsync ranges from config file
[ 4602.346] (II) intel(0): Using vrefresh ranges from config file
[ 4602.346] (II) intel(0): Printing DDC gathered Modelines:
[ 4602.346] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 4602.346] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4602.346] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4602.346] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4602.346] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4626.228] (II) intel(0): EDID vendor "ENC", prod id 5767
[ 4626.228] (II) intel(0): Using hsync ranges from config file
[ 4626.228] (II) intel(0): Using vrefresh ranges from config file
[ 4626.228] (II) intel(0): Printing DDC gathered Modelines:
[ 4626.228] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 4626.228] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4626.228] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4626.228] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4626.228] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4630.240] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 4696.406] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4696.406] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 4696.510] (II) intel(0): EDID vendor "ENC", prod id 5767
[ 4696.510] (II) intel(0): Using hsync ranges from config file
[ 4696.510] (II) intel(0): Using vrefresh ranges from config file
[ 4696.510] (II) intel(0): Printing DDC gathered Modelines:
[ 4696.510] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 4696.510] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4696.510] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4696.510] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4696.510] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=44505
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
E: DMI_VENDOR=System manufacturer
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3873
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=33842
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2
E: DMI_VENDOR=System manufacturer
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=3350
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1
E: DEVPATH=/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1
E: EV=17
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c05b
E: ID_PATH=pci-0000:00:1a.2-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1a_2-usb-0_1_1_0
E: ID_REVISION=5400
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ff0000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0003v046DpC05Be0111-e0,1,2,4,k110,111,112,113,114,115,116,117,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="Logitech USB Optical Mouse"
E: PHYS="usb-0000:00:1a.2-1/input0"
E: PRODUCT=3/46d/c05b/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: UNIQ=""
E: USEC_INITIALIZED=75793
P: /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/event1
N: input/event1
S: input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse
S: input/by-path/pci-0000:00:1a.2-usb-0:1:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-event-mouse /dev/input/by-path/pci-0000:00:1a.2-usb-0:1:1.0-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c05b
E: ID_PATH=pci-0000:00:1a.2-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1a_2-usb-0_1_1_0
E: ID_REVISION=5400
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2541
P: /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Optical_Mouse-mouse
S: input/by-path/pci-0000:00:1a.2-usb-0:1:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Optical_Mouse-mouse /dev/input/by-path/pci-0000:00:1a.2-usb-0:1:1.0-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Optical_Mouse
E: ID_MODEL_ENC=USB\x20Optical\x20Mouse
E: ID_MODEL_ID=c05b
E: ID_PATH=pci-0000:00:1a.2-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1a_2-usb-0_1_1_0
E: ID_REVISION=5400
E: ID_SERIAL=Logitech_USB_Optical_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=75813
P: /devices/pci0000:00/0000:00:1b.0/input/input5
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input5
E: EV=40001
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v10ECp0883e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/10ec/883/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: USEC_INITIALIZED=78676
P: /devices/pci0000:00/0000:00:1b.0/input/input5/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input5/event5
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=78712
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA Intel Line Out Surround"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: USEC_INITIALIZED=91193
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: USEC_INITIALIZED=91245
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA Intel Line Out Front"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: USEC_INITIALIZED=91292
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: USEC_INITIALIZED=91344
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfwD,
E: NAME="HDA Intel Line"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=2000
E: USEC_INITIALIZED=91391
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
N: input/event12
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: USEC_INITIALIZED=91444
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Rear Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: USEC_INITIALIZED=91493
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
N: input/event13
E: DEVNAME=/dev/input/event13
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=77
E: SUBSYSTEM=input
E: USEC_INITIALIZED=91546
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Front Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: USEC_INITIALIZED=91593
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event14
N: input/event14
E: DEVNAME=/dev/input/event14
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event14
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=78
E: SUBSYSTEM=input
E: USEC_INITIALIZED=91644
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,8,
E: NAME="HDA Intel HDMI/DP,pcm=3"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=140
E: USEC_INITIALIZED=90775
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input6/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input6/event6
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=90835
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel Front Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: USEC_INITIALIZED=90885
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=90940
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA Intel Line Out Side"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: USEC_INITIALIZED=90989
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=91044
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA Intel Line Out CLFE"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: USEC_INITIALIZED=91092
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=91144
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=9234
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: DMI_VENDOR=System manufacturer
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=99541
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/pcspkr/input/input4
E: DEVPATH=/devices/platform/pcspkr/input/input4
E: EV=40001
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: USEC_INITIALIZED=52257
P: /devices/platform/pcspkr/input/input4/event4
N: input/event4
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/platform/pcspkr/input/input4/event4
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=53235
DRM Information from dmesg:
---------------------------
[ 6.092964] [drm] Initialized drm 1.1.0 20060810
[ 6.106877] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2982 flags=is_broadwater,has_hotplug,has_overlay,
[ 6.106927] [drm] Memory usable by graphics device = 512M
[ 6.106930] [drm:i915_gem_gtt_init], GMADR size = 256M
[ 6.106931] [drm:i915_gem_gtt_init], GTT stolen size = 8M
[ 6.107062] [drm:intel_opregion_setup], graphic opregion physical addr: 0xcf78e0f4
[ 6.107069] [drm:intel_opregion_setup], Public ACPI methods supported
[ 6.107071] [drm:intel_opregion_setup], SWSCI supported
[ 6.107072] [drm:intel_opregion_setup], ASLE supported
[ 6.107108] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.107110] [drm] Driver supports precise vblank timestamp query.
[ 6.107111] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[ 6.107114] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT BROADWATER-G d
[ 6.107116] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 6.107119] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 6.107122] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 6.107123] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 6.107126] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 6.107128] [drm:parse_device_mapping], no child dev is parsed from VBT
[ 6.107133] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 6.107138] [drm:i915_gem_init_stolen], found 8388608 bytes of stolen memory at cf800000
[ 6.107163] [drm:intel_modeset_init], 2 display pipes available.
[ 6.107168] [drm:intel_modeset_init], pipe 0 plane 0 init failed: -19
[ 6.107174] [drm:intel_modeset_init], pipe 1 plane 0 init failed: -19
[ 6.107176] [drm:intel_pch_pll_init], No PCH PLLs on this hardware, skipping initialisation
[ 6.107510] [drm:intel_setup_outputs], probing SDVOB
[ 6.107513] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
[ 6.222196] [drm:intel_sdvo_debug_write], SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS)
[ 6.223710] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 04 AE 00 02 01 01 01 00
[ 6.237064] [drm:intel_sdvo_get_capabilities], SDVO capabilities:
[ 6.237070] [drm:intel_sdvo_debug_write], SDVOB: W: 0C (SDVO_CMD_GET_HOT_PLUG_SUPPORT)
[ 6.238585] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 6.243936] [drm:intel_sdvo_debug_write], SDVOB: W: 0D 01 00 (SDVO_CMD_SET_ACTIVE_HOT_PLUG)
[ 6.246796] [drm:intel_sdvo_debug_write], SDVOB: W: 9D (SDVO_CMD_GET_SUPP_ENCODE)
[ 6.248318] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 12
[ 6.251752] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
[ 6.255747] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 6.257067] [drm:intel_sdvo_debug_write], SDVOB: W: 1D (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
[ 6.258590] [drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 09 74 40
[ 6.263420] [drm:intel_sdvo_init], SDVOB device VID/DID: 04:AE.00, clock range 25MHz - 165MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
[ 6.263425] [drm:intel_setup_outputs], probing SDVOC
[ 6.263427] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 2
[ 6.263709] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[ 6.263711] [drm:intel_sdvo_init], No SDVO device found on SDVOC
[ 6.263733] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 1
[ 6.263738] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 1ffff000]
[ 6.266941] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[ 6.267066] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[ 6.267119] [drm:i915_gem_object_create_stolen], creating stolen object: size=1000
[ 6.267122] [drm:i915_pages_create_for_stolen], offset=0x20000, size=4096
[ 6.267276] [drm] initialized overlay support
[ 6.267279] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: enabled
[ 6.267282] [drm:intel_modeset_setup_hw_state], [CRTC:4] hw state readout: enabled
[ 6.267284] [drm:intel_modeset_setup_hw_state], [ENCODER:6:DAC-6] hw state readout: disabled, pipe=0
[ 6.267287] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 6.268987] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 6.272197] [drm:intel_modeset_setup_hw_state], [ENCODER:7:TMDS-7] hw state readout: enabled, pipe=0
[ 6.272200] [drm:intel_modeset_setup_hw_state], [CONNECTOR:5:VGA-1] hw state readout: disabled
[ 6.272292] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 6.274018] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 6.277192] [drm:intel_modeset_setup_hw_state], [CONNECTOR:8:HDMI-A-1] hw state readout: enabled
[ 6.284021] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[ 6.284026] [drm:intel_sanitize_crtc], [CRTC:4] hw state adjusted, was enabled, now disabled
[ 6.284031] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 6.285628] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 6.288271] [drm:intel_connector_check_state], [CONNECTOR:8:HDMI-A-1]
[ 6.288360] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 6.289891] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 6.292746] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6]
[ 6.292749] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7]
[ 6.292789] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 6.294314] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 6.297657] [drm:intel_modeset_check_state], [CRTC:3]
[ 6.297660] [drm:intel_modeset_check_state], [CRTC:4]
[ 6.297668] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 6.320295] [drm:intel_crt_detect], CRT not detected via hotplug
[ 6.344103] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 6.344107] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 6.344109] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 6.344111] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 6.344367] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 6.344369] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 6.344371] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 6.344374] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 6.344377] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 6.344380] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 6.345891] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 6.348518] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 6.349009] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 6.352459] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 6.381966] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 6.386957] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 6.415584] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 6.417151] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 6.417154] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 6.417158] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 6.417161] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 6.417164] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 6.417166] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 6.417170] [drm:drm_setup_crtcs],
[ 6.417172] [drm:drm_enable_connectors], connector 5 enabled? no
[ 6.417174] [drm:drm_enable_connectors], connector 8 enabled? yes
[ 6.417176] [drm:drm_target_preferred], looking for cmdline mode on connector 8
[ 6.417177] [drm:drm_target_preferred], looking for preferred mode on connector 8
[ 6.417179] [drm:drm_target_preferred], found mode 1280x1024
[ 6.417181] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 6.417184] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3
[ 6.417187] [drm:i915_gem_object_create_stolen], creating stolen object: size=500000
[ 6.417192] [drm:i915_pages_create_for_stolen], offset=0x21000, size=5242880
[ 6.418576] [drm:intelfb_create], allocated 1280x1024 fb: 0x00040000, bo f74a5ec0
[ 6.418646] fbcon: inteldrmfb (fb0) is primary device
[ 6.419692] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 6.419694] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
[ 6.419695] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 6.419697] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 6.419700] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 6.419702] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 6.419703] [drm:intel_crtc_set_config], attempting to set mode from userspace
[ 6.419705] [drm:drm_mode_debug_printmodeline], Modeline 16:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 6.419708] [drm:intel_sdvo_compute_config], forcing bpc to 8 for SDVO
[ 6.419710] [drm:intel_modeset_pipe_config], [CRTC:3]
[ 6.419711] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 6.419713] [drm:__intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 6.419717] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 6.423358] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 6.428020] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000000
[ 6.428024] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[ 6.428427] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[ 6.428430] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 6.452016] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120
[ 6.452019] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[ 6.452022] [drm:intel_crtc_mode_set], [ENCODER:7:TMDS-7] set [MODE:0:1280x1024]
[ 6.452026] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP)
[ 6.456856] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
[ 6.456859] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00 (SDVO_CMD_SET_TARGET_OUTPUT)
[ 6.460466] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 6.460799] [drm:intel_sdvo_debug_write], SDVOB: W: 16 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
[ 6.468195] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
[ 6.468196] [drm] Setting output timings on SDVOB failed
[ 6.468200] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
[ 6.471176] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 6.471179] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00 (SDVO_CMD_SET_ENCODE)
[ 6.475251] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 6.475532] [drm:intel_sdvo_debug_write], SDVOB: W: 14 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
[ 6.483137] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 6.483214] [drm:intel_sdvo_debug_write], SDVOB: W: 15 30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
[ 6.490534] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 6.490537] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT)
[ 6.493544] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 6.493549] [drm:i965_update_wm], self-refresh entries: 80, wm: 432
[ 6.493551] [drm:i965_update_wm], self-refresh watermark: display plane 432 cursor 32
[ 6.493552] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432
[ 6.532030] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS)
[ 6.535494] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
[ 6.535498] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 6.539560] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 6.539565] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 6.544213] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 6.544215] [drm:intel_connector_check_state], [CONNECTOR:8:HDMI-A-1]
[ 6.544222] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 6.548625] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 6.548627] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6]
[ 6.548629] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7]
[ 6.548632] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 6.552717] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 6.552719] [drm:intel_modeset_check_state], [CRTC:3]
[ 6.552720] [drm:intel_modeset_check_state], [CRTC:4]
[ 6.552723] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 6.552726] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 6.552757] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 6.552760] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 6.558870] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 6.558872] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 6.565037] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.565092] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.521671] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 9.521676] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 18.194274] [drm:i915_driver_open],
[ 18.194302] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 18.194307] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 18.194310] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 18.194312] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 18.206273] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 18.206277] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 18.212691] [drm:i915_driver_open],
[ 18.212701] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 18.213531] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 18.213536] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 18.213538] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 18.213541] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 18.213603] [drm:i915_driver_open],
[ 18.213610] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 18.213613] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 18.213622] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 18.213625] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 18.213627] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 18.213629] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 18.214389] [drm:i915_driver_open],
[ 18.214401] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 18.214405] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 18.214407] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 18.214409] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 18.214418] [drm:i915_driver_open],
[ 18.214534] [drm:i915_getparam], Unknown parameter 22
[ 18.215102] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 18.215107] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 18.215146] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 18.215149] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 18.220064] [drm:intel_crt_detect], CRT not detected via hotplug
[ 18.225164] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 18.225168] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 18.225170] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 18.225172] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 18.225428] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 18.225429] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 18.225431] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 18.225434] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 18.225442] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 18.225444] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 18.232022] [drm:intel_crt_detect], CRT not detected via hotplug
[ 18.236050] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 18.236054] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 18.236056] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 18.236058] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 18.236311] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 18.236313] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 18.236315] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 18.236317] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 18.236362] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 18.236365] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 18.236368] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 18.237863] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 18.240480] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 18.240764] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 18.243735] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 18.272013] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 18.274984] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 18.302819] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 18.302899] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 18.302902] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 18.302905] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 18.302908] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 18.302911] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 18.302914] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 18.302921] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 18.302969] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 18.302972] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 18.308019] [drm:intel_crt_detect], CRT not detected via hotplug
[ 18.312077] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 18.312082] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 18.312085] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 18.312088] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 18.312342] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 18.312344] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 18.312347] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 18.312351] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 18.312360] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 18.312363] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 18.320013] [drm:intel_crt_detect], CRT not detected via hotplug
[ 18.324070] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 18.324074] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 18.324077] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 18.324079] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 18.324333] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 18.324335] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 18.324338] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 18.324341] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 18.324397] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 18.324402] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 18.324405] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 18.325899] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 18.328521] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 18.328897] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 18.331878] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 18.366757] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 18.370174] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 18.398070] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 18.398950] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 18.398953] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 18.398956] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 18.398959] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 18.398962] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 18.398965] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 18.398974] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 18.414616] [drm:drm_mode_addfb], [FB:18]
[ 18.414687] [drm:drm_mode_setcrtc], [CRTC:3]
[ 18.414691] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1]
[ 18.414693] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 18.414697] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 18.418985] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120
[ 18.432036] [drm:drm_mode_setcrtc], [CRTC:4]
[ 18.432039] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 18.432042] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 18.456283] [drm:i915_getparam], Unknown parameter 22
[ 146.788152] [drm:intel_crtc_cursor_set], cursor off
[ 151.559681] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 151.561202] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 151.563806] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 151.563809] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 151.566868] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 151.600029] [drm:intel_crt_detect], CRT not detected via hotplug
[ 151.606811] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 151.606816] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 151.606819] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 151.606821] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 151.607077] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 151.607080] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 151.607083] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 166.014694] [drm:i915_driver_open],
[ 166.015951] [drm:i915_getparam], Unknown parameter 22
[ 166.080967] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 166.080973] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 166.088022] [drm:intel_crt_detect], CRT not detected via hotplug
[ 166.092082] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 166.092087] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 166.092089] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 166.092091] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 166.092344] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 166.092346] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 166.092348] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 166.092351] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 166.092360] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 166.092362] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 166.100021] [drm:intel_crt_detect], CRT not detected via hotplug
[ 166.104085] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 166.104089] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 166.104092] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 166.104094] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 166.104350] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 166.104352] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 166.104354] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 166.104357] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 166.104389] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 166.104392] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 166.104396] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 166.105913] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 166.108566] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 166.108843] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 166.111866] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 166.140649] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 166.143647] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 166.172552] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 166.175323] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 166.175327] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 166.175331] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 166.175334] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 166.175337] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 166.175339] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 166.175358] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 217.298283] [drm:intel_crtc_cursor_set], cursor off
[ 641.523213] [drm:intel_crtc_cursor_set], cursor off
[ 704.156134] [drm:intel_crtc_cursor_set], cursor off
[ 748.524594] [drm:intel_crtc_cursor_set], cursor off
[ 842.203972] [drm:intel_crtc_cursor_set], cursor off
[ 926.288085] [drm:intel_crtc_cursor_set], cursor off
[ 1057.296889] [drm:intel_crtc_cursor_set], cursor off
[ 1100.260212] [drm:intel_crtc_cursor_set], cursor off
[ 1190.968882] [drm:intel_crtc_cursor_set], cursor off
[ 1216.583292] [drm:intel_crtc_cursor_set], cursor off
[ 1236.263589] [drm:intel_crtc_cursor_set], cursor off
[ 1245.510984] [drm:intel_crtc_cursor_set], cursor off
[ 1304.759922] [drm:intel_crtc_cursor_set], cursor off
[ 1362.010930] [drm:intel_crtc_cursor_set], cursor off
[ 1407.088235] [drm:intel_crtc_cursor_set], cursor off
[ 1573.340801] [drm:intel_crtc_cursor_set], cursor off
[ 1640.283790] [drm:intel_crtc_cursor_set], cursor off
[ 1719.557802] [drm:intel_crtc_cursor_set], cursor off
[ 1743.512386] [drm:intel_crtc_cursor_set], cursor off
[ 1802.522774] [drm:intel_crtc_cursor_set], cursor off
[ 2068.515973] [drm:intel_crtc_cursor_set], cursor off
[ 2181.610195] [drm:intel_crtc_cursor_set], cursor off
[ 2323.592746] [drm:intel_crtc_cursor_set], cursor off
[ 2520.551158] [drm:intel_crtc_cursor_set], cursor off
[ 2568.178965] [drm:intel_crtc_cursor_set], cursor off
[ 2583.903953] [drm:intel_crtc_cursor_set], cursor off
[ 2770.621058] [drm:intel_crtc_cursor_set], cursor off
[ 2792.216573] [drm:intel_crtc_cursor_set], cursor off
[ 2806.102207] [drm:intel_crtc_cursor_set], cursor off
[ 2818.782233] [drm:intel_crtc_cursor_set], cursor off
[ 2832.775200] [drm:intel_crtc_cursor_set], cursor off
[ 2840.452288] [drm:intel_crtc_cursor_set], cursor off
[ 2860.167627] [drm:intel_crtc_cursor_set], cursor off
[ 2866.887706] [drm:intel_crtc_cursor_set], cursor off
[ 2904.120326] [drm:intel_crtc_cursor_set], cursor off
[ 2939.937225] [drm:intel_crtc_cursor_set], cursor off
[ 2948.778201] [drm:intel_crtc_cursor_set], cursor off
[ 2971.468831] [drm:intel_crtc_cursor_set], cursor off
[ 2979.226592] [drm:intel_crtc_cursor_set], cursor off
[ 3030.443549] [drm:intel_crtc_cursor_set], cursor off
[ 3040.299733] [drm:intel_crtc_cursor_set], cursor off
[ 3077.576574] [drm:intel_crtc_cursor_set], cursor off
[ 3160.131167] [drm:intel_crtc_cursor_set], cursor off
[ 3175.224725] [drm:intel_crtc_cursor_set], cursor off
[ 3254.763648] [drm:intel_crtc_cursor_set], cursor off
[ 3358.266357] [drm:intel_crtc_cursor_set], cursor off
[ 3576.370899] [drm:intel_crtc_cursor_set], cursor off
[ 3590.168806] [drm:intel_crtc_cursor_set], cursor off
[ 3614.408492] [drm:intel_crtc_cursor_set], cursor off
[ 3621.573140] [drm:intel_crtc_cursor_set], cursor off
[ 3639.913068] [drm:intel_crtc_cursor_set], cursor off
[ 3692.209019] [drm:intel_crtc_cursor_set], cursor off
[ 3933.663671] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 3933.666411] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 3933.667285] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 3933.670023] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 3933.700011] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000000
[ 3933.700017] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[ 3933.700022] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 3933.701517] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
[ 3933.704131] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6]
[ 3933.704134] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7]
[ 3933.704143] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 3933.705636] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
[ 3933.708253] [drm:intel_modeset_check_state], [CRTC:3]
[ 3933.708256] [drm:intel_modeset_check_state], [CRTC:4]
[ 3954.716625] [drm:i965_update_wm], self-refresh entries: 80, wm: 432
[ 3954.716630] [drm:i965_update_wm], self-refresh watermark: display plane 432 cursor 32
[ 3954.716633] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432
[ 3954.772023] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS)
[ 3954.773523] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
[ 3954.775264] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 3954.778005] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 3954.778883] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 3954.781622] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 3954.782495] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 3954.783989] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 3954.786604] [drm:intel_connector_check_state], [CONNECTOR:8:HDMI-A-1]
[ 3954.786607] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 3954.788105] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 3954.790717] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6]
[ 3954.790719] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7]
[ 3954.790721] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 3954.792215] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 3954.794816] [drm:intel_modeset_check_state], [CRTC:3]
[ 3954.794818] [drm:intel_modeset_check_state], [CRTC:4]
[ 3968.710486] [drm:intel_crtc_cursor_set], cursor off
[ 3968.956122] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 3968.956127] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 3968.956133] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120
[ 3968.964023] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 3968.964026] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 3968.964029] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 3968.964032] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 3968.964039] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 3968.964042] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 3994.353752] [drm:drm_mode_setcrtc], [CRTC:3]
[ 3994.353761] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1]
[ 3994.353764] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 3994.353769] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 3994.353776] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120
[ 3994.360057] [drm:drm_mode_setcrtc], [CRTC:4]
[ 3994.360062] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 3994.360066] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 3994.360130] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 3994.360133] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 3994.368019] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3994.372016] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 3994.372021] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3994.372027] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 3994.372029] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 3994.372284] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3994.372286] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 3994.372289] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 3994.372292] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 3994.372300] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 3994.372303] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 3994.380011] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3994.384012] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 3994.384016] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3994.384019] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 3994.384021] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 3994.384274] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3994.384277] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 3994.384280] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 3994.384282] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 3994.384296] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 3994.384299] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 3994.384303] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 3994.385797] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 3994.388414] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 3994.388423] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 3994.391403] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 3994.419299] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 3994.422288] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 3994.450050] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 3994.450065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 3994.450067] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 3994.450071] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 3994.450074] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 3994.450076] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 3994.450079] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 3994.450085] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 3994.450786] [drm:i915_driver_open],
[ 4035.287984] [drm:intel_crtc_cursor_set], cursor off
[ 4035.508185] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4035.508190] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4035.508196] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120
[ 4035.532014] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 4035.532017] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4035.532021] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4035.532023] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4035.532032] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4035.532035] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4037.484374] [drm:drm_mode_setcrtc], [CRTC:3]
[ 4037.484381] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1]
[ 4037.484384] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 4037.484389] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4037.484396] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120
[ 4037.492047] [drm:drm_mode_setcrtc], [CRTC:4]
[ 4037.492052] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 4037.492056] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4037.492119] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4037.492123] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4037.500011] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4037.504014] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4037.504022] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4037.504025] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4037.504027] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4037.504283] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4037.504285] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4037.504288] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4037.504291] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4037.504298] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4037.504301] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4037.512008] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4037.516013] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4037.516019] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4037.516021] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4037.516024] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4037.516277] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4037.516279] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4037.516282] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4037.516285] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4037.516299] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 4037.516303] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 4037.516306] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 4037.517800] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4037.520414] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 4037.520423] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4037.523404] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4037.551292] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4037.554273] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4037.582028] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 4037.582047] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 4037.582050] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 4037.582053] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 4037.582056] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 4037.582059] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 4037.582062] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 4037.582067] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 4285.813669] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 4285.816418] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4285.817291] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 4285.820029] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4285.844013] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000000
[ 4285.844017] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[ 4285.844022] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 4285.845516] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
[ 4285.848130] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6]
[ 4285.848133] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7]
[ 4285.848142] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 4285.849635] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
[ 4285.852256] [drm:intel_modeset_check_state], [CRTC:3]
[ 4285.852259] [drm:intel_modeset_check_state], [CRTC:4]
[ 4375.838548] [drm:i965_update_wm], self-refresh entries: 80, wm: 432
[ 4375.838553] [drm:i965_update_wm], self-refresh watermark: display plane 432 cursor 32
[ 4375.838556] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432
[ 4375.892011] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS)
[ 4375.893509] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
[ 4375.895249] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 4375.897985] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4375.898863] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 4375.901601] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4375.902474] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 4375.903967] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4375.906588] [drm:intel_connector_check_state], [CONNECTOR:8:HDMI-A-1]
[ 4375.906591] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 4375.908086] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4375.910687] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6]
[ 4375.910689] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7]
[ 4375.910691] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 4375.912182] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4375.914782] [drm:intel_modeset_check_state], [CRTC:3]
[ 4375.914785] [drm:intel_modeset_check_state], [CRTC:4]
[ 4375.914810] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 4375.917536] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4375.918409] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 4375.921135] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4375.944010] [drm:i9xx_pfit_disable], disabling pfit, current: 0x00000000
[ 4375.944014] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[ 4375.944018] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 4375.945513] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
[ 4375.948130] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6]
[ 4375.948133] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7]
[ 4375.948141] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 4375.949634] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
[ 4375.952254] [drm:intel_modeset_check_state], [CRTC:3]
[ 4375.952257] [drm:intel_modeset_check_state], [CRTC:4]
[ 4408.275342] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe A
[ 4408.275344] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe B
[ 4409.010254] [drm:i915_redisable_vga], Something enabled VGA plane, disabling it
[ 4409.010564] [drm:intel_opregion_setup], graphic opregion physical addr: 0xcf78e0f4
[ 4409.010574] [drm:intel_opregion_setup], Public ACPI methods supported
[ 4409.010576] [drm:intel_opregion_setup], SWSCI supported
[ 4409.010577] [drm:intel_opregion_setup], ASLE supported
[ 4409.010581] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[ 4409.010584] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[ 4409.010614] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: disabled
[ 4409.010616] [drm:intel_modeset_setup_hw_state], [CRTC:4] hw state readout: disabled
[ 4409.010619] [drm:intel_modeset_setup_hw_state], [ENCODER:6:DAC-6] hw state readout: disabled, pipe=0
[ 4409.010623] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 4409.014749] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
[ 4409.014751] [drm:intel_modeset_setup_hw_state], [ENCODER:7:TMDS-7] hw state readout: disabled, pipe=0
[ 4409.014754] [drm:intel_modeset_setup_hw_state], [CONNECTOR:5:VGA-1] hw state readout: disabled
[ 4409.014757] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 4409.018845] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
[ 4409.018848] [drm:intel_modeset_setup_hw_state], [CONNECTOR:8:HDMI-A-1] hw state readout: disabled
[ 4409.018852] [drm:intel_sdvo_compute_config], forcing bpc to 8 for SDVO
[ 4409.018853] [drm:intel_modeset_pipe_config], [CRTC:3]
[ 4409.018855] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 4409.018856] [drm:__intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 4409.019257] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[ 4409.019260] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 4409.036030] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120
[ 4409.060018] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[ 4409.060022] [drm:intel_crtc_mode_set], [ENCODER:7:TMDS-7] set [MODE:0:1280x1024]
[ 4409.060028] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP)
[ 4409.065184] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
[ 4409.065188] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00 (SDVO_CMD_SET_TARGET_OUTPUT)
[ 4409.068784] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4409.068789] [drm:intel_sdvo_debug_write], SDVOB: W: 16 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
[ 4409.076089] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
[ 4409.076090] [drm] Setting output timings on SDVOB failed
[ 4409.076093] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
[ 4409.079061] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4409.079069] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00 (SDVO_CMD_SET_ENCODE)
[ 4409.082043] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4409.082050] [drm:intel_sdvo_debug_write], SDVOB: W: 14 30 2A 00 98 51 00 2A 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
[ 4409.089340] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4409.089344] [drm:intel_sdvo_debug_write], SDVOB: W: 15 30 70 13 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
[ 4409.096633] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4409.096637] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT)
[ 4409.099603] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4409.099607] [drm:i965_update_wm], self-refresh entries: 80, wm: 432
[ 4409.099608] [drm:i965_update_wm], self-refresh watermark: display plane 432 cursor 32
[ 4409.099609] [drm:i965_update_wm], Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 432
[ 4409.140022] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS)
[ 4409.143238] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
[ 4409.143242] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 4409.146827] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 4409.146830] [drm:__intel_set_mode], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[ 4409.146835] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 4409.150918] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4409.150920] [drm:intel_connector_check_state], [CONNECTOR:8:HDMI-A-1]
[ 4409.150924] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 4409.155007] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4409.155009] [drm:intel_modeset_check_state], [ENCODER:6:DAC-6]
[ 4409.155011] [drm:intel_modeset_check_state], [ENCODER:7:TMDS-7]
[ 4409.155014] [drm:intel_sdvo_debug_write], SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[ 4409.159098] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4409.159100] [drm:intel_modeset_check_state], [CRTC:3]
[ 4409.159101] [drm:intel_modeset_check_state], [CRTC:4]
[ 4409.159104] [drm:intel_resume_hotplug], running encoder hotplug functions
[ 4409.159108] [drm:intel_sdvo_debug_write], SDVOB: W: 0D 01 00 (SDVO_CMD_SET_ACTIVE_HOT_PLUG)
[ 4409.168013] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4409.172014] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4409.172015] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4409.172017] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4409.172019] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4409.172270] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4409.172272] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4409.172273] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4409.172275] [drm:drm_helper_hpd_irq_event], [CONNECTOR:5:VGA-1] status updated from unknown to disconnected
[ 4409.172279] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 4409.176365] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4409.176367] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 4409.176371] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4409.179339] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4409.207084] [drm:drm_helper_hpd_irq_event], [CONNECTOR:8:HDMI-A-1] status updated from unknown to connected
[ 4420.798419] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4420.798425] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4420.804021] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4420.808023] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4420.808029] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4420.808031] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4420.808033] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4420.808290] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4420.808292] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4420.808294] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4420.808297] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4420.808345] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4420.808348] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4420.816017] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4420.820019] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4420.820024] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4420.820026] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4420.820028] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4420.820280] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4420.820282] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4420.820284] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4420.820287] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4420.820347] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 4420.820350] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 4420.820353] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 4420.822101] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4420.824716] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 4420.824719] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4420.827722] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4420.856215] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4420.859186] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4420.887140] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 4420.887414] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 4420.887417] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 4420.887420] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 4420.887423] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 4420.887426] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 4420.887429] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 4420.887519] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 4421.375099] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 4421.376637] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4421.382953] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 4421.382958] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4421.387720] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4421.424041] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4421.428030] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4421.428037] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4421.428041] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4421.428043] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4421.428298] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4421.428301] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4421.428303] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4421.428919] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 4421.430438] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4421.433112] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 4421.433116] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4421.436106] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4421.472022] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4421.476024] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4421.476031] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4421.476034] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4421.476036] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4421.476290] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4421.476293] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4421.476296] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4447.800207] [drm:intel_crtc_cursor_set], cursor off
[ 4448.020184] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4448.020188] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4448.020195] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120
[ 4448.028020] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 4448.028023] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4448.028025] [drm:drm_fb_helper_hotplug_event],
[ 4448.028027] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4448.036021] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4448.040029] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4448.040031] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4448.040033] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4448.040035] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4448.040288] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4448.040289] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4448.040291] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4448.040292] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4448.040294] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 4448.040299] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 4448.044397] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4448.044398] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 4448.044402] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4448.047370] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4448.075148] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4448.078124] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4448.105922] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 4448.105942] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 4448.105945] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 4448.105947] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 4448.105949] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 4448.105952] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 4448.105954] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 4448.105955] [drm:drm_setup_crtcs],
[ 4448.105957] [drm:drm_enable_connectors], connector 5 enabled? no
[ 4448.105958] [drm:drm_enable_connectors], connector 8 enabled? yes
[ 4448.105960] [drm:drm_target_preferred], looking for cmdline mode on connector 8
[ 4448.105961] [drm:drm_target_preferred], looking for preferred mode on connector 8
[ 4448.105962] [drm:drm_target_preferred], found mode 1280x1024
[ 4448.105963] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 4448.105965] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 3
[ 4448.105968] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4448.105970] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4448.105972] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 4448.105974] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4448.105976] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4448.105978] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4448.105987] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4448.105989] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4448.551646] [drm:drm_mode_addfb], [FB:18]
[ 4448.551706] [drm:drm_mode_setcrtc], [CRTC:3]
[ 4448.551710] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1]
[ 4448.551712] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 4448.551716] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4448.556656] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120
[ 4448.572059] [drm:drm_mode_setcrtc], [CRTC:4]
[ 4448.572065] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 4448.572070] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4448.584341] [drm:i915_getparam], Unknown parameter 22
[ 4448.614853] [drm:i915_driver_open],
[ 4473.120850] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4473.120856] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4473.128027] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4473.132081] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4473.132086] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4473.132088] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4473.132090] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4473.132344] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4473.132346] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4473.132348] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4473.132351] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4473.132405] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4473.132408] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4473.140217] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4473.144076] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4473.144080] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4473.144082] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4473.144084] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4473.144341] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4473.144343] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4473.144345] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4473.144348] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4473.144423] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 4473.144426] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 4473.144430] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 4473.145938] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4473.148595] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 4473.150697] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4473.154344] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4473.192087] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4473.204662] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4473.233067] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 4473.248065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 4473.248069] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 4473.248072] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 4473.248076] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 4473.248078] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 4473.248081] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 4473.248214] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 4505.027707] [drm:intel_crtc_cursor_set], cursor off
[ 4505.108263] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4505.108268] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4505.108277] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120
[ 4505.124024] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 4505.124028] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4505.124030] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4505.124033] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4505.124043] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4505.124045] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4539.492224] [drm:drm_mode_addfb], [FB:18]
[ 4539.492293] [drm:drm_mode_setcrtc], [CRTC:3]
[ 4539.492297] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1]
[ 4539.492299] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 4539.492303] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4539.496665] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120
[ 4539.512054] [drm:drm_mode_setcrtc], [CRTC:4]
[ 4539.512059] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 4539.512062] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4539.522547] [drm:i915_getparam], Unknown parameter 22
[ 4539.558690] [drm:i915_driver_open],
[ 4541.746456] [drm:intel_crtc_cursor_set], cursor off
[ 4541.972160] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4541.972166] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4541.972172] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120
[ 4541.980015] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 4541.980018] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4541.980021] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4541.980024] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4541.980033] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4541.980036] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4602.248540] [drm:drm_mode_setcrtc], [CRTC:3]
[ 4602.248549] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1]
[ 4602.248552] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 4602.248558] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4602.248565] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120
[ 4602.256043] [drm:drm_mode_setcrtc], [CRTC:4]
[ 4602.256048] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 4602.256052] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4602.256113] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4602.256116] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4602.264009] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4602.268013] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4602.268018] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4602.268021] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4602.268023] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4602.268278] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4602.268280] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4602.268283] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4602.268286] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4602.268291] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4602.268294] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4602.276012] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4602.280012] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4602.280016] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4602.280019] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4602.280021] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4602.280274] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4602.280277] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4602.280280] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4602.280282] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4602.280298] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 4602.280301] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 4602.280305] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 4602.281799] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4602.284414] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 4602.284423] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4602.287403] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4602.315294] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4602.318272] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4602.346028] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 4602.346048] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 4602.346050] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 4602.346054] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 4602.346057] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 4602.346060] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 4602.346062] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 4602.346068] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 4625.848087] [drm:intel_crtc_cursor_set], cursor off
[ 4626.086400] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4626.086406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4626.092027] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4626.096084] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4626.096088] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4626.096090] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4626.096092] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4626.096351] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4626.096353] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4626.096355] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4626.096358] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4626.096366] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4626.096369] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4626.104076] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4626.108130] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4626.108135] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4626.108137] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4626.108139] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4626.108398] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4626.108400] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4626.108402] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4626.108405] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4626.108434] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 4626.108437] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 4626.108440] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 4626.109940] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4626.112584] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 4626.114085] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4626.117159] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4626.160709] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4626.163722] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4626.197952] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 4626.228398] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 4626.228403] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 4626.228406] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 4626.228409] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 4626.228412] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 4626.228415] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 4626.228455] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 4629.819133] [drm:intel_crtc_cursor_set], cursor off
[ 4630.240224] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4630.240228] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4630.240236] [drm:i9xx_update_plane], Writing base 00040000 00000000 0 0 5120
[ 4630.248018] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 4630.248022] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4630.248025] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4630.248027] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4630.248038] [drm:intel_crtc_set_config], [CRTC:3] [FB:17] #connectors=1 (x y) (0 0)
[ 4630.248040] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4696.406149] [drm:drm_mode_setcrtc], [CRTC:3]
[ 4696.406157] [drm:drm_mode_setcrtc], [CONNECTOR:8:HDMI-A-1]
[ 4696.406159] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 4696.406164] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4696.406171] [drm:i9xx_update_plane], Writing base 00540000 00000000 0 0 5120
[ 4696.420060] [drm:drm_mode_setcrtc], [CRTC:4]
[ 4696.420065] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 4696.420069] [drm:intel_modeset_stage_output_state], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 4696.420137] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4696.420140] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4696.428024] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4696.432085] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4696.432089] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4696.432092] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4696.432095] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4696.432350] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4696.432352] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4696.432355] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4696.432359] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4696.432368] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 4696.432372] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 4696.440014] [drm:intel_crt_detect], CRT not detected via hotplug
[ 4696.444019] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 4696.444026] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4696.444029] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 4696.444031] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 4696.444286] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 4696.444289] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 4696.444291] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 4696.444295] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 4696.444320] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 4696.444324] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 4696.444328] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 4696.445822] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 4696.448448] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 4696.448461] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4696.451442] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4696.479330] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4696.482318] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 4696.510088] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 4696.510106] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 4696.510108] [drm:drm_mode_debug_printmodeline], Modeline 11:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 4696.510111] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 4696.510114] [drm:drm_mode_debug_printmodeline], Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 4696.510117] [drm:drm_mode_debug_printmodeline], Modeline 13:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 4696.510120] [drm:drm_mode_debug_printmodeline], Modeline 14:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 4696.510126] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[ 4723.675773] [drm:i915_driver_open],
[ 4723.676204] [drm:i915_getparam], Unknown parameter 22
[ 5244.260870] [drm:intel_crtc_cursor_set], cursor off
[ 5315.821281] [drm:intel_crtc_cursor_set], cursor off
[ 5320.770240] [drm:intel_crtc_cursor_set], cursor off
[ 5325.880584] [drm:intel_crtc_cursor_set], cursor off
[ 5451.210146] [drm:intel_crtc_cursor_set], cursor off
[ 5516.163486] [drm:intel_crtc_cursor_set], cursor off
[ 5552.092073] [drm:intel_crtc_cursor_set], cursor off
[ 5636.406447] [drm:intel_crtc_cursor_set], cursor off
[ 5646.396339] [drm:intel_crtc_cursor_set], cursor off
[ 5653.928227] [drm:intel_crtc_cursor_set], cursor off
[ 5668.944010] [drm:intel_crtc_cursor_set], cursor off
[ 5677.323217] [drm:intel_crtc_cursor_set], cursor off
[ 5695.543803] [drm:intel_crtc_cursor_set], cursor off
[ 5707.965719] [drm:intel_crtc_cursor_set], cursor off
[ 5709.719930] [drm:intel_crtc_cursor_set], cursor off
[ 5728.769802] [drm:intel_crtc_cursor_set], cursor off
[ 5733.775275] [drm:intel_crtc_cursor_set], cursor off
[ 5838.001522] [drm:intel_crtc_cursor_set], cursor off
[ 5850.610621] [drm:intel_crtc_cursor_set], cursor off
[ 5850.977019] [drm:intel_crtc_cursor_set], cursor off
[ 5851.697818] [drm:intel_crtc_cursor_set], cursor off
[ 5853.157021] [drm:intel_crtc_cursor_set], cursor off
[ 5876.501989] [drm:intel_crtc_cursor_set], cursor off
[ 5920.638497] [drm:intel_crtc_cursor_set], cursor off
[ 5922.508929] [drm:intel_crtc_cursor_set], cursor off
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (600, 'testing'), (500, 'stable'), (300, 'unstable'), (250, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.10-3-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.17-93
ii libdrm-intel1 2.4.46-3
ii libdrm2 2.4.46-3
ii libpciaccess0 0.13.2-1
ii libpixman-1-0 0.30.2-1
ii libudev1 204-5
ii libx11-6 2:1.6.2-1
ii libx11-xcb1 2:1.6.2-1
ii libxcb-dri2-0 1.9.1-3
ii libxcb-util0 0.3.8-2
ii libxcb1 1.9.1-3
ii libxv1 2:1.0.9-1
ii libxvmc1 2:1.0.8-1
ii xserver-xorg-core [xorg-video-abi-14] 2:1.14.3-4
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
Reply to: