Bug#726154: xserver-xorg-video-radeon: conffiles not removed
Package: xserver-xorg-video-radeon
Version: 1:7.2.0-1+b2
Severity: normal
Usertags: conffile
User: debian-qa@lists.debian.org
Usertags: obsolete-conffile adequate
Dear Maintainer,
The recent upgrade did not deal with obsolete conffiles properly.
Please use the dpkg-maintscript-helper support provided by dh_installdeb
to remove these obsolete conffiles on upgrade.
http://www.debian.org/doc/debian-policy/ch-files.html#s-config-files
http://manpages.debian.net/man/1/dh_installdeb
$ pkg=xserver-xorg-video-radeon ; adequate $pkg ; dpkg-query -W
-f='${Conffiles}\n' $pkg | grep obsolete
xserver-xorg-video-radeon: obsolete-conffile /etc/modprobe.d/radeon-kms.conf
/etc/modprobe.d/radeon-kms.conf 3792130931629c4398df31ffa5dd0d9c obsolete
The bug is modelled on Paul Wise's bug #726082 .
Please lemme know if any more info. is needed. This is on relatively a
newish install (only couple of months old.)
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Jul 25 22:46 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2285840 Oct 5 19:37 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31
Express Integrated Graphics Controller [8086:29c2] (rev 10)
/etc/X11/xorg.conf does not exist.
Contents of /etc/X11/xorg.conf.d:
---------------------------------
total 4
-rw-r--r-- 1 root root 97 Aug 29 04:54 20-intel.conf
KMS configuration files:
------------------------
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 3.10-3-amd64 (debian-kernel@lists.debian.org) (gcc
version 4.7.3 (Debian 4.7.3-7) ) #1 SMP Debian 3.10.11-1 (2013-09-10)
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 23526 Oct 13 00:26 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 100.170]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 100.170] X Protocol Version 11, Revision 0
[ 100.170] Build Operating System: Linux 3.10-2-amd64 x86_64 Debian
[ 100.170] Current Operating System: Linux debian 3.10-3-amd64 #1
SMP Debian 3.10.11-1 (2013-09-10) x86_64
[ 100.171] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.10-3-amd64
root=UUID=87d82d2b-dc1a-4f01-8ba4-c68290598b23 ro ipv6.disable=1 quiet
[ 100.171] Build Date: 22 September 2013 02:44:54PM
[ 100.171] xorg-server 2:1.14.3-3 (Julien Cristau <jcristau@debian.org>)
[ 100.171] Current version of pixman: 0.30.2
[ 100.171] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 100.171] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 100.171] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 8
10:31:02 2013
[ 100.186] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 100.186] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 100.227] (==) No Layout section. Using the first Screen section.
[ 100.227] (==) No screen section available. Using defaults.
[ 100.227] (**) |-->Screen "Default Screen Section" (0)
[ 100.227] (**) | |-->Monitor "<default monitor>"
[ 100.228] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 100.228] (**) | |-->Device "Intel Graphics"
[ 100.228] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 100.228] (==) Automatically adding devices
[ 100.228] (==) Automatically enabling devices
[ 100.228] (==) Automatically adding GPU devices
[ 100.258] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 100.258] Entry deleted from font path.
[ 100.321] (WW) The directory
"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 100.321] Entry deleted from font path.
[ 100.321] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 100.321] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 100.321] (II) The server relies on udev to provide the list of
input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 100.321] (II) Loader magic: 0x7fa43c62fd00
[ 100.321] (II) Module ABI versions:
[ 100.321] X.Org ANSI C Emulation: 0.4
[ 100.321] X.Org Video Driver: 14.1
[ 100.321] X.Org XInput driver : 19.1
[ 100.321] X.Org Server Extension : 7.0
[ 100.322] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 100.323] (--) PCI:*(0:0:2:0) 8086:29c2:1043:82b0 rev 16, Mem @
0xfea80000/524288, 0xe0000000/268435456, 0xfe900000/1048576, I/O @
0x0000dc00/8
[ 100.323] (II) Open ACPI successful (/var/run/acpid.socket)
[ 100.323] Initializing built-in extension Generic Event Extension
[ 100.323] Initializing built-in extension SHAPE
[ 100.323] Initializing built-in extension MIT-SHM
[ 100.323] Initializing built-in extension XInputExtension
[ 100.323] Initializing built-in extension XTEST
[ 100.323] Initializing built-in extension BIG-REQUESTS
[ 100.323] Initializing built-in extension SYNC
[ 100.323] Initializing built-in extension XKEYBOARD
[ 100.323] Initializing built-in extension XC-MISC
[ 100.323] Initializing built-in extension SECURITY
[ 100.323] Initializing built-in extension XINERAMA
[ 100.323] Initializing built-in extension XFIXES
[ 100.323] Initializing built-in extension RENDER
[ 100.323] Initializing built-in extension RANDR
[ 100.323] Initializing built-in extension COMPOSITE
[ 100.323] Initializing built-in extension DAMAGE
[ 100.323] Initializing built-in extension MIT-SCREEN-SAVER
[ 100.323] Initializing built-in extension DOUBLE-BUFFER
[ 100.323] Initializing built-in extension RECORD
[ 100.323] Initializing built-in extension DPMS
[ 100.323] Initializing built-in extension X-Resource
[ 100.323] Initializing built-in extension XVideo
[ 100.323] Initializing built-in extension XVideo-MotionCompensation
[ 100.323] Initializing built-in extension SELinux
[ 100.323] Initializing built-in extension XFree86-VidModeExtension
[ 100.323] Initializing built-in extension XFree86-DGA
[ 100.323] Initializing built-in extension XFree86-DRI
[ 100.323] Initializing built-in extension DRI2
[ 100.323] (II) LoadModule: "glx"
[ 100.325] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 100.347] (II) Module glx: vendor="X.Org Foundation"
[ 100.347] compiled for 1.14.3, module version = 1.0.0
[ 100.347] ABI class: X.Org Server Extension, version 7.0
[ 100.347] (==) AIGLX enabled
[ 100.347] Loading extension GLX
[ 100.347] (II) LoadModule: "intel"
[ 100.362] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 100.393] (II) Module intel: vendor="X.Org Foundation"
[ 100.394] compiled for 1.14.3, module version = 2.21.15
[ 100.394] Module class: X.Org Video Driver
[ 100.394] ABI class: X.Org Video Driver, version 14.1
[ 100.394] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 100.395] (++) using VT number 7
[ 100.423] (II) intel(0): SNA compiled: xserver-xorg-video-intel
2:2.21.15-1+b2 (amd64 Build Daemon (binet)
<buildd-binet@buildd.debian.org>)
[ 100.442] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 100.442] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 100.442] (==) intel(0): RGB weight 888
[ 100.442] (==) intel(0): Default visual is TrueColor
[ 100.442] (**) intel(0): Option "AccelMethod" "sna"
[ 100.442] (--) intel(0): Integrated Graphics Chipset: Intel(R) G33
[ 100.442] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3
[ 100.442] (**) intel(0): Framebuffer tiled
[ 100.442] (**) intel(0): Pixmaps tiled
[ 100.442] (**) intel(0): "Tear free" disabled
[ 100.442] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 100.442] (II) intel(0): Output VGA1 has no monitor section
[ 100.442] (--) intel(0): Output VGA1 using initial mode 1600x900 on pipe 0
[ 100.443] (==) intel(0): DPI set to (96, 96)
[ 100.443] (II) Loading sub module "dri2"
[ 100.443] (II) LoadModule: "dri2"
[ 100.443] (II) Module "dri2" already built-in
[ 100.443] (==) Depth 24 pixmap format is 32 bpp
[ 100.450] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 100.450] (==) intel(0): Backing store disabled
[ 100.450] (==) intel(0): Silken mouse enabled
[ 100.450] (II) intel(0): HW Cursor enabled
[ 100.450] (II) intel(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[ 100.451] (==) intel(0): DPMS enabled
[ 100.459] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[ 100.459] (II) intel(0): [DRI2] Setup complete
[ 100.459] (II) intel(0): [DRI2] DRI driver: i915
[ 100.459] (II) intel(0): direct rendering: DRI2 Enabled
[ 100.459] (==) intel(0): hotplug detection: "enabled"
[ 100.459] (--) RandR disabled
[ 100.474] (II) SELinux: Disabled on system
[ 100.631] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 100.631] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 100.631] (II) AIGLX: enabled GLX_ARB_create_context
[ 100.631] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 100.631] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 100.631] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 100.631] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 100.632] (II) AIGLX: Loaded and initialized i915
[ 100.632] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 100.641] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[ 100.652] (II) intel(0): Setting screen physical size to 423 x 238
[ 101.168] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[ 101.168] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 101.168] (II) LoadModule: "evdev"
[ 101.168] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 101.196] (II) Module evdev: vendor="X.Org Foundation"
[ 101.196] compiled for 1.14.3, module version = 2.8.1
[ 101.196] Module class: X.Org XInput Driver
[ 101.196] ABI class: X.Org XInput driver, version 19.1
[ 101.196] (II) Using input driver 'evdev' for 'Power Button'
[ 101.196] (**) Power Button: always reports core events
[ 101.196] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 101.196] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 101.196] (--) evdev: Power Button: Found keys
[ 101.196] (II) evdev: Power Button: Configuring as keyboard
[ 101.196] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 101.196] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 101.196] (**) Option "xkb_rules" "evdev"
[ 101.196] (**) Option "xkb_model" "pc105"
[ 101.196] (**) Option "xkb_layout" "us"
[ 101.196] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 101.196] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 101.196] (II) Using input driver 'evdev' for 'Power Button'
[ 101.196] (**) Power Button: always reports core events
[ 101.196] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 101.196] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 101.196] (--) evdev: Power Button: Found keys
[ 101.196] (II) evdev: Power Button: Configuring as keyboard
[ 101.196] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 101.196] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 7)
[ 101.196] (**) Option "xkb_rules" "evdev"
[ 101.196] (**) Option "xkb_model" "pc105"
[ 101.196] (**) Option "xkb_layout" "us"
[ 101.197] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 101.197] (II) config/udev: Adding input device HDA Intel Front
Headphone (/dev/input/event4)
[ 101.197] (II) No input driver specified, ignoring this device.
[ 101.197] (II) This device may have been added with another device file.
[ 101.197] (II) config/udev: Adding input device HDA Intel Line Out
(/dev/input/event5)
[ 101.197] (II) No input driver specified, ignoring this device.
[ 101.197] (II) This device may have been added with another device file.
[ 101.197] (II) config/udev: Adding input device HDA Intel Line
(/dev/input/event6)
[ 101.197] (II) No input driver specified, ignoring this device.
[ 101.197] (II) This device may have been added with another device file.
[ 101.198] (II) config/udev: Adding input device HDA Intel Front Mic
(/dev/input/event7)
[ 101.198] (II) No input driver specified, ignoring this device.
[ 101.198] (II) This device may have been added with another device file.
[ 101.198] (II) config/udev: Adding input device HDA Intel Rear Mic
(/dev/input/event8)
[ 101.198] (II) No input driver specified, ignoring this device.
[ 101.198] (II) This device may have been added with another device file.
[ 101.198] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event0)
[ 101.198] (**) AT Translated Set 2 keyboard: Applying InputClass
"evdev keyboard catchall"
[ 101.198] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 101.198] (**) AT Translated Set 2 keyboard: always reports core events
[ 101.198] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0"
[ 101.198] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 101.198] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 101.198] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 101.198] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 101.198] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD, id 8)
[ 101.198] (**) Option "xkb_rules" "evdev"
[ 101.198] (**) Option "xkb_model" "pc105"
[ 101.198] (**) Option "xkb_layout" "us"
[ 101.199] (II) config/udev: Adding input device ImExPS/2 Logitech
Explorer Mouse (/dev/input/event9)
[ 101.199] (**) ImExPS/2 Logitech Explorer Mouse: Applying
InputClass "evdev pointer catchall"
[ 101.199] (II) Using input driver 'evdev' for 'ImExPS/2 Logitech
Explorer Mouse'
[ 101.199] (**) ImExPS/2 Logitech Explorer Mouse: always reports core events
[ 101.199] (**) evdev: ImExPS/2 Logitech Explorer Mouse: Device:
"/dev/input/event9"
[ 101.199] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Vendor 0x2
Product 0x6
[ 101.199] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons
[ 101.199] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
[ 101.199] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found relative axes
[ 101.199] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found x and
y relative axes
[ 101.199] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
[ 101.199] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Adding
scrollwheel support
[ 101.199] (**) evdev: ImExPS/2 Logitech Explorer Mouse:
YAxisMapping: buttons 4 and 5
[ 101.199] (**) evdev: ImExPS/2 Logitech Explorer Mouse:
EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout:
200
[ 101.199] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 101.199] (II) XINPUT: Adding extended input device "ImExPS/2
Logitech Explorer Mouse" (type: MOUSE, id 9)
[ 101.199] (II) evdev: ImExPS/2 Logitech Explorer Mouse: initialized
for relative axes.
[ 101.199] (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping
acceleration scheme 1
[ 101.199] (**) ImExPS/2 Logitech Explorer Mouse: (accel)
acceleration profile 0
[ 101.199] (**) ImExPS/2 Logitech Explorer Mouse: (accel)
acceleration factor: 2.000
[ 101.199] (**) ImExPS/2 Logitech Explorer Mouse: (accel)
acceleration threshold: 4
[ 101.199] (II) config/udev: Adding input device ImExPS/2 Logitech
Explorer Mouse (/dev/input/mouse0)
[ 101.199] (II) No input driver specified, ignoring this device.
[ 101.199] (II) This device may have been added with another device file.
[ 101.200] (II) config/udev: Adding input device PC Speaker
(/dev/input/event3)
[ 101.200] (II) No input driver specified, ignoring this device.
[ 101.200] (II) This device may have been added with another device file.
[ 101.304] (II) intel(0): EDID vendor "VSC", prod id 27686
[ 101.304] (II) intel(0): Using EDID range info for horizontal sync
[ 101.304] (II) intel(0): Using EDID range info for vertical refresh
[ 101.304] (II) intel(0): Printing DDC gathered Modelines:
[ 101.304] (II) intel(0): Modeline "1600x900"x0.0 108.00 1600 1624
1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP)
[ 101.304] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 101.304] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 101.304] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 101.304] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664
704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 101.304] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704
768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 101.304] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 101.304] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 101.304] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 101.304] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 101.304] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048
1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 101.304] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 101.304] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864
928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 101.304] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 101.304] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856
976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 101.304] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 101.304] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520
1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 101.304] (II) intel(0): Modeline "1400x1050"x0.0 121.75 1400
1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 101.304] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 101.304] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352
1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 15196.299] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[ 32217.719] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[ 38674.536] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[ 42395.943] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[ 50370.870] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[ 55187.724] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[ 59376.507] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[ 73264.954] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[ 77074.512] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[ 78755.280] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[ 86150.351] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[ 99233.664] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[101543.441] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[108160.499] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[114099.913] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[125671.427] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[128843.122] (II) AIGLX: Suspending AIGLX clients for VT switch
[128888.901] (II) Open ACPI successful (/var/run/acpid.socket)
[128890.063] (II) AIGLX: Resuming AIGLX clients after VT switch
[128890.210] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[128899.213] [mi] Increasing EQ size to 512 to prevent dropped events.
[128902.868] (II) AIGLX: Suspending AIGLX clients for VT switch
[128931.375] (II) Open ACPI successful (/var/run/acpid.socket)
[128931.509] (II) AIGLX: Resuming AIGLX clients after VT switch
[128931.611] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[130524.484] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[132788.448] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[135430.355] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[146621.432] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[152254.034] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[154972.943] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[164000.735] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[165538.623] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[168902.777] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[174796.978] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[175995.915] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[193432.398] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[199122.093] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[202416.229] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[205137.650] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[207133.372] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[215200.992] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[217794.002] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[219731.835] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[221576.433] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[284953.502] (II) intel(0): switch to mode 640x480@72.8 on pipe 0
using VGA1, position (0, 0), rotation normal
[284953.592] (II) intel(0): switch to mode 640x480@72.8 on pipe 0
using VGA1, position (0, 0), rotation normal
[284956.666] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[285225.532] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[285225.533] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
[395801.821] (II) AIGLX: Suspending AIGLX clients for VT switch
[395850.743] (II) Open ACPI successful (/var/run/acpid.socket)
[395850.743] (II) AIGLX: Resuming AIGLX clients after VT switch
[395850.797] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0
using VGA1, position (0, 0), rotation normal
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
E: EV=3
E: ID_FOR_SEAT=input-acpi-LNXPWRBN_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=88100
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
N: input/event2
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
E: DMI_VENDOR=System manufacturer
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=19422
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
E: EV=3
E: ID_FOR_SEAT=input-acpi-PNP0C0C_00
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=87597
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1
N: input/event1
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1
E: DMI_VENDOR=System manufacturer
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: TAGS=:power-switch:
E: USEC_INITIALIZED=19054
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input4
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel Front Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: TAGS=:seat:
E: USEC_INITIALIZED=85746
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input4/event4
N: input/event4
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input4/event4
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: USEC_INITIALIZED=85794
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input5
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw6,
E: NAME="HDA Intel Line Out"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=40
E: TAGS=:seat:
E: USEC_INITIALIZED=85826
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input5/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input5/event5
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=85863
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfwD,
E: NAME="HDA Intel Line"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=2000
E: TAGS=:seat:
E: USEC_INITIALIZED=85897
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input6/event6
N: input/event6
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input6/event6
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=85934
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Front Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=85968
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event7
N: input/event7
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: USEC_INITIALIZED=86002
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
E: EV=21
E: ID_FOR_SEAT=input-pci-0000_00_1b_0
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Rear Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: TAGS=:seat:
E: USEC_INITIALIZED=86038
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event8
N: input/event8
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: USEC_INITIALIZED=86073
P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=54504
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: DMI_VENDOR=System manufacturer
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=18641
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input9
E: DEVPATH=/devices/platform/i8042/serio1/input/input9
E: EV=7
E: ID_FOR_SEAT=input-platform-i8042-serio-1
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=1f0000 0 0 0 0
E: MODALIAS=input:b0011v0002p0006e006A-e0,1,2,k110,111,112,113,114,r0,1,6,8,amlsfw
E: NAME="ImExPS/2 Logitech Explorer Mouse"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/6/6a
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=24159
P: /devices/platform/i8042/serio1/input/input9/event9
N: input/event9
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/platform/i8042/serio1/input/input9/event9
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: USEC_INITIALIZED=24304
P: /devices/platform/i8042/serio1/input/input9/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input9/mouse0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=24286
P: /devices/platform/pcspkr/input/input3
E: DEVPATH=/devices/platform/pcspkr/input/input3
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=28242
P: /devices/platform/pcspkr/input/input3/event3
N: input/event3
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/platform/pcspkr/input/input3/event3
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: USEC_INITIALIZED=28662
DRM Information from dmesg:
---------------------------
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (600, 'testing'), (1, 'experimental'), (1, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.10-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-radeon depends on:
ii libc6 2.17-93
ii libdrm-radeon1 2.4.46-3
ii libpciaccess0 0.13.2-1
ii libudev1 204-5
ii xserver-xorg-core [xorg-video-abi-14] 2:1.14.3-4
xserver-xorg-video-radeon recommends no packages.
Versions of packages xserver-xorg-video-radeon suggests:
pn firmware-linux <none>
-- no debconf information
--
Regards,
Shirish Agarwal शिरीष अग्रवाल
My quotes in this email licensed under CC 3.0
http://creativecommons.org/licenses/by-nc/3.0/
http://flossexperiences.wordpress.com
065C 6D79 A68C E7EA 52B3 8D70 950D 53FB 729A 8B17
Reply to: