Bug#721749: xserver-xorg-video-r128: DVD playback very choppy on iMac G3 (model: M5521; R128 Ultra AGP 2x @ 16MB)
Package: xserver-xorg-video-r128
Version: 6.8.2-1
Severity: important
Dear Maintainer,
My iMac G3 specs:
*Model: M5521
*600MHz PowerPC G3
*ATI Rage 128 Ultra - 16MB AGP 2x
*1 GB RAM
*DVD Drive (exact model detailed below)
The problem:
Attempting to load any DVD movie into any DVD-capable media player results in
very choppy video and audio playback and a very sluggish system until the
program is either terminated or until the user clicks the stop button and waits
for the DVD playback to stop. Strictly for a base comparison, DVD movies
played smoothly under Mac OSX, but struggle under Debian (and Ubuntu) on the
same hardware.
Things I've tried to remedy this:
-I successfully compiled VLC player to run on the PowerPC G3 (without
"Altivec" instructions/optimizations). While DVD movies were able to play, the
audio and video playback were very choppy, regardless of any combination of
codec settings I've tried.
-I then tried Gxine, which yielded a slightly smoother performance in
playback, but the entire system became very sluggish and almost unresponsive
while the DVD was playing; simple things like dragging windows, clicking menus,
and even using a second Terminal window. The system became responsive again,
after I clicked the stop button in Gxine and waited for the DVD playback to
stop.
-Booting Debian Wheezy without an xorg.conf file always fails, so
instead, I boot with the xorg.conf file detailed below. Note that I have
"ForcePCIMode" enabled. If I were to set that to false (implying AGP mode),
the system freezes, even at the system login screen (GDM). This makes me
wonder if I'm getting the full AGP 2x speed out of my hardware, even with
"ForcePCIMode" enabled, or if I am just getting the unaccelerated PCI bus
speed. I also wonder if this is the main reason why DVD playback is so slow.
Other noteworthy references:
-When I examined the '/System/Library/Extensions' path in Mac OS X, I
noticed that there were actually some additional files/drivers apart from the
R128 driver that seemed to work in conjunction with the Rage128 driver to
provide accelerated DVD performance. I could only speculate this by their
filenames. I made a short post of it on the MintPPC forums
(http://www.mintppc.org/forums/viewtopic.php?p=8147#p8147). Perhaps the
current xserver-xorg-video-r128 driver has no provisions for DVD acceleration?
-I am currently using the most up-to-date versions of the following
DVD-related components, as provided on the default Debian repository and the
MintPPC repository:
*libdvdcss2 = 1.2.10-.02medibuntu1
*libdvdread4 = 4.2.0+20120521-2
*liba52-0.7.4 = 0.7.4-16
*libxine1-ffmpeg = 1.1.21-1+b1
*libxine2-ffmpeg = 1.2.2-4
-Per the advice provided on the Ubuntu Wiki (catered for PowerPC
users), I have also downgraded MESA from v8.x to 7.x in order to get some level
of graphics acceleration.
My DVD drive information:
$ dmesg | egrep -i --color 'cdrom|dvd|cd/rw|writer'
[ 2.543117] ata1.01: ATAPI: MATSHITADVD-ROM SR-8184, AA32, max UDMA/33
[ 2.635249] scsi 0:0:1:0: CD-ROM MATSHITA DVD-ROM SR-8184 AA32
PQ: 0 ANSI: 5
[ 3.538292] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 3.545777] cdrom: Uniform CD-ROM driver Revision: 3.20
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Jun 14 23:07 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2052584 Apr 17 04:39 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 1872 Sep 3 08:31 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
#iMac G3 Tray Loading (Early 2001+Summer 2001)
#ATI RAGE 128 Pro and ATI RAGE 128 ULTRA
#To get graphics acceleration, downgrade MESA to v7.11
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Device"
Identifier "ATI Rage 128"
BusID "PCI:0:16:0"
Driver "r128"
Option "ForcePCIMode" "true"
Option "NoInt10" "true"
Option "UseFBDev" "false"
Option "Display" "BIOS"
Option "AGPFastWrite" "true"
Option "EnablePageFlip" "true"
Option "DMAForXv" "true"
Option "CCEusecTimeout" "100000"
Option "XAANoOffscreenPixmaps" "true"
Option "NoAccel" "Off"
Option "backingstore" "on"
Option "TripleBuffer" "on"
Option "AGPMode" "4"
Option "AGPSize" "128"
Option "RingSize" "8"
Option "BufferSize" "2"
Option "DynamicClocks" "on"
Option "DirectRendering" "on"
#Option "AccelMethod" "EXA"
#
####################### NOT USED
#Option "AGPFastWrite" "true"
#Option "BusType" "PCI"
#Option "GARTSize" "8"
####################### UNTESTED
#Option "Dac6Bit" "off"
#Option "ShowCache" "off"
#Option "SWcursor" "off"
#Option "FBDevhw" "on"
#
#
#
EndSection
Section "Monitor"
Identifier "Configured Monitor"
#Horizsync 30-65
#Vertrefresh 50-75
Horizsync 58-62
VertRefresh 75-117
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
Option "Accel"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
Section "Module"
#Disable "glx"
#Disable "dri"
Load "dri"
Load "glx"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "record"
Load "i2c"
Load "ddc"
Load "dri2"
Load "freetype"
Load "type1"
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "AIGLX" "True"
EndSection
Section "DRI"
Mode 0666
EndSection
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
-------------------------------
Linux version 3.2.0-4-powerpc-smp (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1+deb7u1
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 34946 Sep 3 08:53 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 48.634]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 48.635] X Protocol Version 11, Revision 0
[ 48.635] Build Operating System: Linux 2.6.32-5-powerpc64 ppc Debian
[ 48.635] Current Operating System: Linux debian 3.2.0-4-powerpc-smp #1 SMP Debian 3.2.46-1+deb7u1 ppc
[ 48.638] Kernel command line: root=UUID=0f42653d-fd23-4684-8aca-df9587607804 ro
[ 48.639] Build Date: 17 April 2013 11:18:58AM
[ 48.639] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>)
[ 48.639] Current version of pixman: 0.26.0
[ 48.639] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 48.639] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 48.643] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 3 08:53:54 2013
[ 48.649] (==) Using config file: "/etc/X11/xorg.conf"
[ 48.649] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 48.651] (==) ServerLayout "Default Layout"
[ 48.651] (**) |-->Screen "Default Screen" (0)
[ 48.651] (**) | |-->Monitor "Configured Monitor"
[ 48.653] (==) No device specified for screen "Default Screen".
Using the first device section listed.
[ 48.653] (**) | |-->Device "ATI Rage 128"
[ 48.653] (==) Automatically adding devices
[ 48.653] (==) Automatically enabling devices
[ 48.654] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 48.654] Entry deleted from font path.
[ 48.654] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 48.654] Entry deleted from font path.
[ 48.654] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 48.654] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 48.654] (**) Extension "Composite" is enabled
[ 48.654] (WW) Ignoring unrecognized extension "AIGLX"
[ 48.654] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 48.655] (II) Loader magic: 0x20678574
[ 48.655] (II) Module ABI versions:
[ 48.655] X.Org ANSI C Emulation: 0.4
[ 48.655] X.Org Video Driver: 12.1
[ 48.655] X.Org XInput driver : 16.0
[ 48.655] X.Org Server Extension : 6.0
[ 48.693] (--) PCI:*(0:0:16:0) 1002:5452:1002:5452 rev 0, Mem @ 0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256, BIOS @ 0x????????/131072
[ 48.700] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 48.700] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 48.700] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 48.700] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 48.700] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 48.700] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 48.701] (II) LoadModule: "dri"
[ 48.751] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 48.754] (II) Module dri: vendor="X.Org Foundation"
[ 48.754] compiled for 1.12.4, module version = 1.0.0
[ 48.754] ABI class: X.Org Server Extension, version 6.0
[ 48.754] (II) Loading extension XFree86-DRI
[ 48.755] (II) LoadModule: "glx"
[ 48.765] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 48.771] (II) Module glx: vendor="X.Org Foundation"
[ 48.771] compiled for 1.12.4, module version = 1.0.0
[ 48.772] ABI class: X.Org Server Extension, version 6.0
[ 48.772] (==) AIGLX enabled
[ 48.772] (II) Loading extension GLX
[ 48.772] (II) LoadModule: "extmod"
[ 48.784] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 48.797] (II) Module extmod: vendor="X.Org Foundation"
[ 48.798] compiled for 1.12.4, module version = 1.0.0
[ 48.798] Module class: X.Org Server Extension
[ 48.798] ABI class: X.Org Server Extension, version 6.0
[ 48.798] (II) Loading extension SELinux
[ 48.798] (II) Loading extension MIT-SCREEN-SAVER
[ 48.798] (II) Loading extension XFree86-VidModeExtension
[ 48.798] (II) Loading extension XFree86-DGA
[ 48.798] (II) Loading extension DPMS
[ 48.798] (II) Loading extension XVideo
[ 48.798] (II) Loading extension XVideo-MotionCompensation
[ 48.798] (II) Loading extension X-Resource
[ 48.798] (II) LoadModule: "dbe"
[ 48.810] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 48.814] (II) Module dbe: vendor="X.Org Foundation"
[ 48.814] compiled for 1.12.4, module version = 1.0.0
[ 48.814] Module class: X.Org Server Extension
[ 48.814] ABI class: X.Org Server Extension, version 6.0
[ 48.814] (II) Loading extension DOUBLE-BUFFER
[ 48.814] (II) LoadModule: "xtrap"
[ 48.841] (WW) Warning, couldn't open module xtrap
[ 48.842] (II) UnloadModule: "xtrap"
[ 48.842] (II) Unloading xtrap
[ 48.842] (EE) Failed to load module "xtrap" (module does not exist, 0)
[ 48.842] (II) LoadModule: "record"
[ 48.852] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 48.854] (II) Module record: vendor="X.Org Foundation"
[ 48.855] compiled for 1.12.4, module version = 1.13.0
[ 48.855] Module class: X.Org Server Extension
[ 48.855] ABI class: X.Org Server Extension, version 6.0
[ 48.855] (II) Loading extension RECORD
[ 48.855] (II) LoadModule: "i2c"
[ 48.855] (II) Module "i2c" already built-in
[ 48.855] (II) LoadModule: "ddc"
[ 48.855] (II) Module "ddc" already built-in
[ 48.855] (II) LoadModule: "dri2"
[ 48.864] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 48.873] (II) Module dri2: vendor="X.Org Foundation"
[ 48.873] compiled for 1.12.4, module version = 1.2.0
[ 48.873] ABI class: X.Org Server Extension, version 6.0
[ 48.873] (II) Loading extension DRI2
[ 48.873] (II) LoadModule: "r128"
[ 48.879] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[ 48.882] (II) Module r128: vendor="X.Org Foundation"
[ 48.882] compiled for 1.12.1, module version = 6.8.2
[ 48.882] Module class: X.Org Video Driver
[ 48.882] ABI class: X.Org Video Driver, version 12.0
[ 48.883] (II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
[ 48.894] (++) using VT number 7
[ 48.935] (II) R128(0): PCI bus 0 card 16 func 0
[ 48.935] (==) R128(0): Depth 24, (--) framebuffer bpp 32
[ 48.935] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 48.935] (==) R128(0): Default visual is TrueColor
[ 48.937] (**) R128(0): Option "NoAccel" "Off"
[ 48.937] (**) R128(0): Option "DMAForXv" "true"
[ 48.937] (**) R128(0): Option "ForcePCIMode" "true"
[ 48.937] (**) R128(0): Option "CCEusecTimeout" "100000"
[ 48.937] (**) R128(0): Option "AGPMode" "4"
[ 48.937] (**) R128(0): Option "AGPSize" "128"
[ 48.937] (**) R128(0): Option "RingSize" "8"
[ 48.938] (**) R128(0): Option "BufferSize" "2"
[ 48.938] (**) R128(0): Option "EnablePageFlip" "true"
[ 48.938] (**) R128(0): Option "Display" "BIOS"
[ 48.938] (**) R128(0): Option "UseFBDev" "false"
[ 48.938] (II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
[ 48.938] (==) R128(0): RGB weight 888
[ 48.938] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
[ 48.938] (II) Loading sub module "int10"
[ 48.938] (II) LoadModule: "int10"
[ 48.951] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 48.957] (II) Module int10: vendor="X.Org Foundation"
[ 48.957] compiled for 1.12.4, module version = 1.0.0
[ 48.957] ABI class: X.Org Video Driver, version 12.1
[ 48.957] (II) R128(0): initializing int10
[ 48.957] (**) R128(0): Option "NoINT10" "true"
[ 48.958] (--) R128(0): Chipset: "ATI Rage 128 Pro ULTRA TR (AGP)" (ChipID = 0x5452)
[ 48.958] (--) R128(0): Linear framebuffer at 0x94000000
[ 48.958] (--) R128(0): MMIO registers at 0x90000000
[ 48.969] (--) R128(0): VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1)
[ 48.970] (**) R128(0): Using external CRT for display
[ 48.970] (**) R128(0): Will try to use DMA for Xv image transfers
[ 48.970] (**) R128(0): Forced into PCI-only mode
[ 48.973] (WW) R128(0): Failed to read PCI ROM!
[ 48.973] (WW) R128(0): Video BIOS not found!
[ 48.973] (II) R128(0): Primary Display == Type 3
[ 48.973] (WW) R128(0): Can't determine panel dimensions, and none specified.
Disabling programming of FP registers.
[ 48.977] (II) R128(0): PLL parameters: rf=2950 rd=59 min=12500 max=25000; xclk=13000
[ 48.977] (II) Loading sub module "ddc"
[ 48.977] (II) LoadModule: "ddc"
[ 48.977] (II) Module "ddc" already built-in
[ 48.977] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[ 48.981] (II) Loading sub module "i2c"
[ 48.981] (II) LoadModule: "i2c"
[ 48.982] (II) Module "i2c" already built-in
[ 48.982] (II) R128(0): I2C bus "DDC" initialized.
[ 48.982] (II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
[ 48.997] (EE) R128(0): No DFP detected
[ 48.998] (II) R128(0): Configured Monitor: Using hsync range of 58.00-62.00 kHz
[ 48.998] (II) R128(0): Configured Monitor: Using vrefresh range of 75.00-117.00 Hz
[ 48.998] (II) R128(0): Clock range: 12.50 to 250.00 MHz
[ 48.998] (II) R128(0): Not using default mode "640x350" (hsync out of range)
[ 48.998] (II) R128(0): Not using default mode "320x175" (hsync out of range)
[ 48.998] (II) R128(0): Not using default mode "640x400" (hsync out of range)
[ 48.998] (II) R128(0): Not using default mode "320x200" (hsync out of range)
[ 48.998] (II) R128(0): Not using default mode "720x400" (hsync out of range)
[ 48.998] (II) R128(0): Not using default mode "360x200" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "320x240" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "320x240" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "320x240" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "320x240" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "400x300" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "400x300" (hsync out of range)
[ 48.999] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 49.010] (II) R128(0): Not using default mode "400x300" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "400x300" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "400x300" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "1024x768i" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "512x384i" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "512x384" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "512x384" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "512x384" (hsync out of range)
[ 49.011] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 49.012] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 49.012] (II) R128(0): Not using default mode "1280x960" (vrefresh out of range)
[ 49.012] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[ 49.012] (II) R128(0): Not using default mode "1280x960" (hsync out of range)
[ 49.012] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[ 49.012] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[ 49.012] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 49.012] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[ 49.012] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 49.012] (II) R128(0): Not using default mode "1280x1024" (hsync out of range)
[ 49.012] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 49.012] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "1600x1200" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "1792x1344" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "896x672" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
[ 49.013] (II) R128(0): Not using default mode "896x672" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "1856x1392" (hsync out of range)
[ 49.013] (II) R128(0): Not using default mode "928x696" (hsync out of range)
[ 49.014] (II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
[ 49.014] (II) R128(0): Not using default mode "928x696" (hsync out of range)
[ 49.014] (II) R128(0): Not using default mode "1920x1440" (hsync out of range)
[ 49.014] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 49.014] (II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 49.014] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 49.014] (II) R128(0): Not using default mode "832x624" (hsync out of range)
[ 49.014] (II) R128(0): Not using default mode "416x312" (hsync out of range)
[ 49.014] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 49.014] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 49.014] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 49.014] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 49.014] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 49.014] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "1360x768" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "680x384" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "1360x768" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "680x384" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 49.015] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 49.032] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 49.032] (II) R128(0): Not using default mode "1400x1050" (hsync out of range)
[ 49.032] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 49.032] (II) R128(0): Not using default mode "1440x900" (hsync out of range)
[ 49.032] (II) R128(0): Not using default mode "720x450" (hsync out of range)
[ 49.032] (II) R128(0): Not using default mode "1600x1024" (vrefresh out of range)
[ 49.032] (II) R128(0): Not using default mode "800x512" (vrefresh out of range)
[ 49.032] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "1680x1050" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "1920x1080" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "960x540" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "1920x1200" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "960x600" (hsync out of range)
[ 49.033] (II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 49.033] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 49.034] (II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 49.034] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 49.034] (II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 49.034] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 49.034] (II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 49.034] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 49.034] (II) R128(0): Not using mode "800x600" (no mode of this name)
[ 49.034] (II) R128(0): Not using mode "640x480" (no mode of this name)
[ 49.034] (--) R128(0): Virtual size is 1024x768 (pitch 1024)
[ 49.034] (**) R128(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[ 49.034] (II) R128(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz zd)
[ 49.034] (**) R128(0): Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
[ 49.035] (II) R128(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 49.035] (==) R128(0): DPI set to (96, 96)
[ 49.035] (II) Loading sub module "fb"
[ 49.035] (II) LoadModule: "fb"
[ 49.044] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 49.047] (II) Module fb: vendor="X.Org Foundation"
[ 49.047] compiled for 1.12.4, module version = 1.0.0
[ 49.047] ABI class: X.Org ANSI C Emulation, version 0.4
[ 49.047] (II) Loading sub module "ramdac"
[ 49.047] (II) LoadModule: "ramdac"
[ 49.048] (II) Module "ramdac" already built-in
[ 49.048] (II) Loading sub module "shadowfb"
[ 49.048] (II) LoadModule: "shadowfb"
[ 49.062] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 49.065] (II) Module shadowfb: vendor="X.Org Foundation"
[ 49.065] compiled for 1.12.4, module version = 1.0.0
[ 49.065] ABI class: X.Org ANSI C Emulation, version 0.4
[ 49.065] (II) R128(0): Page flipping enabled
[ 49.065] (!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
[ 49.066] (--) Depth 24 pixmap format is 32 bpp
[ 49.083] drmOpenDevice: node name is /dev/dri/card0
[ 49.098] drmOpenDevice: node name is /dev/dri/card0
[ 49.371] drmOpenByBusid: Searching for BusID pci:0000:00:10.0
[ 49.371] drmOpenDevice: node name is /dev/dri/card0
[ 49.371] drmOpenDevice: open result is 7, (OK)
[ 49.371] drmOpenByBusid: drmOpenMinor returns 7
[ 49.372] drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
[ 49.372] (II) [drm] loaded kernel module for "r128" driver.
[ 49.372] (II) [drm] DRM interface version 1.4
[ 49.373] (II) [drm] DRM open master succeeded.
[ 49.373] (II) R128(0): [drm] Using the DRM lock SAREA also for drawables.
[ 49.373] (II) R128(0): [drm] framebuffer handle = 0x94000000
[ 49.373] (II) R128(0): [drm] added 1 reserved context for kernel
[ 49.374] (II) R128(0): X context handle = 0x1
[ 49.374] (II) R128(0): [drm] installed DRM signal handler
[ 49.608] (II) R128(0): [pci] 8192 kB allocated with handle 0xf2fa0000
[ 49.608] (II) R128(0): [pci] ring handle = 0xf2fa0000
[ 49.608] (II) R128(0): [pci] Ring mapped at 0x490a3000
[ 49.608] (II) R128(0): [pci] Ring contents 0x00000000
[ 49.608] (II) R128(0): [pci] ring read ptr handle = 0xf30a1000
[ 49.608] (II) R128(0): [pci] Ring read ptr mapped at 0x4802a000
[ 49.609] (II) R128(0): [pci] Ring read ptr contents 0x00000000
[ 49.609] (II) R128(0): [pci] vertex/indirect buffers handle = 0xf30a2000
[ 49.609] (II) R128(0): [pci] Vertex/indirect buffers mapped at 0x491a4000
[ 49.609] (II) R128(0): [pci] Vertex/indirect buffers contents 0x00000000
[ 49.609] (II) R128(0): [drm] register handle = 0x90000000
[ 49.609] (II) R128(0): [dri] Visual configs initialized
[ 49.610] (II) R128(0): CCE in BM mode
[ 49.610] (II) R128(0): Using 8 MB AGP aperture
[ 49.610] (II) R128(0): Using 1 MB for the ring buffer
[ 49.610] (II) R128(0): Using 2 MB for vertex/indirect buffers
[ 49.610] (II) R128(0): Using 1 MB for AGP textures
[ 49.610] (II) R128(0): Memory manager initialized to (0,0) (1024,3072)
[ 49.610] (II) R128(0): Reserved area from (0,768) to (1024,770)
[ 49.611] (II) R128(0): Largest offscreen area available: 1024 x 2302
[ 49.611] (II) R128(0): Reserved back buffer from (0,770) to (1024,1538)
[ 49.611] (II) R128(0): Reserved depth buffer from (0,1538) to (1024,2307)
[ 49.611] (II) R128(0): Reserved depth span from (0,2306) offset 0x902000
[ 49.611] (II) R128(0): Reserved 4096 kb for textures at offset 0xc00000
[ 49.611] (II) Loading sub module "xaa"
[ 49.611] (II) LoadModule: "xaa"
[ 49.621] (II) Loading /usr/lib/xorg/modules/libxaa.so
[ 49.623] (II) Module xaa: vendor="X.Org Foundation"
[ 49.623] compiled for 1.12.4, module version = 1.2.1
[ 49.623] ABI class: X.Org Video Driver, version 12.1
[ 49.624] (**) R128(0): Option "XaaNoOffscreenPixmaps" "true"
[ 49.624] (II) R128(0): Using XFree86 Acceleration Architecture (XAA)
[ 49.624] Screen to screen bit blits
[ 49.624] Solid filled rectangles
[ 49.625] 8x8 mono pattern filled rectangles
[ 49.625] Indirect CPU to Screen color expansion
[ 49.625] Solid Lines
[ 49.625] Dashed Lines
[ 49.625] Setting up tile and stipple cache:
[ 49.625] 20 128x128 slots
[ 49.625] 5 256x256 slots
[ 49.625] (II) R128(0): Acceleration enabled
[ 49.625] (**) R128(0): Option "BackingStore" "on"
[ 49.626] (**) R128(0): Backing store enabled
[ 49.626] (==) R128(0): Silken mouse enabled
[ 49.626] (II) R128(0): Using hardware cursor (scanline 9228)
[ 49.626] (II) R128(0): Largest offscreen area available: 1024 x 763
[ 49.627] (**) R128(0): DPMS enabled
[ 49.627] (WW) R128(0): Option "AGPFastWrite" is not used
[ 49.644] (WW) R128(0): Option "TripleBuffer" is not used
[ 49.644] (WW) R128(0): Option "DynamicClocks" is not used
[ 49.644] (WW) R128(0): Option "DirectRendering" is not used
[ 49.644] (WW) R128(0): Option "Accel" is not used
[ 49.644] (II) R128(0): [DRI] installation complete
[ 49.754] (II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
[ 49.754] (II) R128(0): [drm] Mapped 128 vertex/indirect buffers
[ 49.755] (II) R128(0): [drm] dma control initialized, using IRQ 48
[ 49.755] (II) R128(0): Direct rendering enabled
[ 49.755] (==) RandR enabled
[ 49.755] (II) Initializing built-in extension Generic Event Extension
[ 49.755] (II) Initializing built-in extension SHAPE
[ 49.755] (II) Initializing built-in extension MIT-SHM
[ 49.755] (II) Initializing built-in extension XInputExtension
[ 49.762] (II) Initializing built-in extension XTEST
[ 49.763] (II) Initializing built-in extension BIG-REQUESTS
[ 49.763] (II) Initializing built-in extension SYNC
[ 49.763] (II) Initializing built-in extension XKEYBOARD
[ 49.763] (II) Initializing built-in extension XC-MISC
[ 49.763] (II) Initializing built-in extension SECURITY
[ 49.763] (II) Initializing built-in extension XINERAMA
[ 49.763] (II) Initializing built-in extension XFIXES
[ 49.763] (II) Initializing built-in extension RENDER
[ 49.763] (II) Initializing built-in extension RANDR
[ 49.763] (II) Initializing built-in extension COMPOSITE
[ 49.763] (II) Initializing built-in extension DAMAGE
[ 49.766] (II) SELinux: Disabled on system
[ 49.966] (II) AIGLX: Screen 0 is not DRI2 capable
[ 49.967] drmOpenDevice: node name is /dev/dri/card0
[ 49.975] drmOpenDevice: open result is 8, (OK)
[ 49.976] drmOpenByBusid: Searching for BusID pci:0000:00:10.0
[ 49.976] drmOpenDevice: node name is /dev/dri/card0
[ 49.980] drmOpenDevice: open result is 8, (OK)
[ 49.980] drmOpenByBusid: drmOpenMinor returns 8
[ 49.980] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 49.980] drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
[ 50.121] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 50.121] (II) AIGLX: Loaded and initialized r128
[ 50.121] (II) GLX: Initialized DRI GL provider for screen 0
[ 50.968] (II) config/udev: Adding input device PowerMac Beep (/dev/input/event4)
[ 50.968] (II) No input driver specified, ignoring this device.
[ 50.968] (II) This device may have been added with another device file.
[ 50.982] (II) config/udev: Adding input device Kensington Kensington Ci75m Wireless Notebook Mouse (/dev/input/event1)
[ 50.983] (**) Kensington Kensington Ci75m Wireless Notebook Mouse: Applying InputClass "evdev pointer catchall"
[ 50.983] (II) LoadModule: "evdev"
[ 50.986] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 50.988] (II) Module evdev: vendor="X.Org Foundation"
[ 50.988] compiled for 1.12.1, module version = 2.7.0
[ 50.988] Module class: X.Org XInput Driver
[ 50.989] ABI class: X.Org XInput driver, version 16.0
[ 50.989] (II) Using input driver 'evdev' for 'Kensington Kensington Ci75m Wireless Notebook Mouse'
[ 50.989] (**) Kensington Kensington Ci75m Wireless Notebook Mouse: always reports core events
[ 50.989] (**) evdev: Kensington Kensington Ci75m Wireless Notebook Mouse: Device: "/dev/input/event1"
[ 50.995] (--) evdev: Kensington Kensington Ci75m Wireless Notebook Mouse: Vendor 0x47d Product 0x1048
[ 50.996] (--) evdev: Kensington Kensington Ci75m Wireless Notebook Mouse: Found 3 mouse buttons
[ 50.996] (--) evdev: Kensington Kensington Ci75m Wireless Notebook Mouse: Found scroll wheel(s)
[ 50.996] (--) evdev: Kensington Kensington Ci75m Wireless Notebook Mouse: Found relative axes
[ 50.996] (--) evdev: Kensington Kensington Ci75m Wireless Notebook Mouse: Found x and y relative axes
[ 50.996] (II) evdev: Kensington Kensington Ci75m Wireless Notebook Mouse: Configuring as mouse
[ 50.996] (II) evdev: Kensington Kensington Ci75m Wireless Notebook Mouse: Adding scrollwheel support
[ 50.996] (**) evdev: Kensington Kensington Ci75m Wireless Notebook Mouse: YAxisMapping: buttons 4 and 5
[ 50.997] (**) evdev: Kensington Kensington Ci75m Wireless Notebook Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 50.997] (**) Option "config_info" "udev:/sys/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1/event1"
[ 50.997] (II) XINPUT: Adding extended input device "Kensington Kensington Ci75m Wireless Notebook Mouse" (type: MOUSE, id 6)
[ 50.997] (II) evdev: Kensington Kensington Ci75m Wireless Notebook Mouse: initialized for relative axes.
[ 50.999] (**) Kensington Kensington Ci75m Wireless Notebook Mouse: (accel) keeping acceleration scheme 1
[ 51.000] (**) Kensington Kensington Ci75m Wireless Notebook Mouse: (accel) acceleration profile 0
[ 51.004] (**) Kensington Kensington Ci75m Wireless Notebook Mouse: (accel) acceleration factor: 2.000
[ 51.004] (**) Kensington Kensington Ci75m Wireless Notebook Mouse: (accel) acceleration threshold: 4
[ 51.015] (II) config/udev: Adding input device Kensington Kensington Ci75m Wireless Notebook Mouse (/dev/input/mouse0)
[ 51.015] (II) No input driver specified, ignoring this device.
[ 51.015] (II) This device may have been added with another device file.
[ 51.031] (II) config/udev: Adding input device Mitsumi Electric Apple Extended USB Keyboard (/dev/input/event2)
[ 51.032] (**) Mitsumi Electric Apple Extended USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 51.032] (II) Using input driver 'evdev' for 'Mitsumi Electric Apple Extended USB Keyboard'
[ 51.032] (**) Mitsumi Electric Apple Extended USB Keyboard: always reports core events
[ 51.032] (**) evdev: Mitsumi Electric Apple Extended USB Keyboard: Device: "/dev/input/event2"
[ 51.034] (--) evdev: Mitsumi Electric Apple Extended USB Keyboard: Vendor 0x5ac Product 0x204
[ 51.035] (--) evdev: Mitsumi Electric Apple Extended USB Keyboard: Found keys
[ 51.035] (II) evdev: Mitsumi Electric Apple Extended USB Keyboard: Configuring as keyboard
[ 51.035] (**) Option "config_info" "udev:/sys/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input2/event2"
[ 51.035] (II) XINPUT: Adding extended input device "Mitsumi Electric Apple Extended USB Keyboard" (type: KEYBOARD, id 7)
[ 51.035] (**) Option "xkb_rules" "evdev"
[ 51.035] (**) Option "xkb_model" "pc105"
[ 51.035] (**) Option "xkb_layout" "us"
[ 51.054] (II) config/udev: Adding input device Mitsumi Electric Apple Extended USB Keyboard (/dev/input/event3)
[ 51.054] (**) Mitsumi Electric Apple Extended USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 51.054] (II) Using input driver 'evdev' for 'Mitsumi Electric Apple Extended USB Keyboard'
[ 51.054] (**) Mitsumi Electric Apple Extended USB Keyboard: always reports core events
[ 51.054] (**) evdev: Mitsumi Electric Apple Extended USB Keyboard: Device: "/dev/input/event3"
[ 51.056] (--) evdev: Mitsumi Electric Apple Extended USB Keyboard: Vendor 0x5ac Product 0x204
[ 51.057] (--) evdev: Mitsumi Electric Apple Extended USB Keyboard: Found keys
[ 51.057] (II) evdev: Mitsumi Electric Apple Extended USB Keyboard: Configuring as keyboard
[ 51.057] (**) Option "config_info" "udev:/sys/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/input/input3/event3"
[ 51.057] (II) XINPUT: Adding extended input device "Mitsumi Electric Apple Extended USB Keyboard" (type: KEYBOARD, id 8)
[ 51.057] (**) Option "xkb_rules" "evdev"
[ 51.057] (**) Option "xkb_model" "pc105"
[ 51.057] (**) Option "xkb_layout" "us"
[ 51.083] (II) config/udev: Adding input device PMU (/dev/input/event0)
[ 51.084] (**) PMU: Applying InputClass "evdev keyboard catchall"
[ 51.084] (II) Using input driver 'evdev' for 'PMU'
[ 51.084] (**) PMU: always reports core events
[ 51.084] (**) evdev: PMU: Device: "/dev/input/event0"
[ 51.087] (--) evdev: PMU: Vendor 0x1 Product 0x1
[ 51.087] (--) evdev: PMU: Found keys
[ 51.087] (II) evdev: PMU: Configuring as keyboard
[ 51.088] (**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"
[ 51.088] (II) XINPUT: Adding extended input device "PMU" (type: KEYBOARD, id 9)
[ 51.088] (**) Option "xkb_rules" "evdev"
[ 51.088] (**) Option "xkb_model" "pc105"
[ 51.088] (**) Option "xkb_layout" "us"
udev information:
-----------------
P: /devices/pci0001:10/0001:10:17.0/input/input4
E: DEVPATH=/devices/pci0001:10/0001:10:17.0/input/input4
E: EV=40001
E: ID_INPUT=1
E: ID_PATH=pci-0001:10:17.0
E: ID_PATH_TAG=pci-0001_10_17_0
E: MODALIAS=input:b0017v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PowerMac Beep"
E: PHYS="powermac/beep"
E: PRODUCT=17/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=27311908
P: /devices/pci0001:10/0001:10:17.0/input/input4/event4
N: input/event4
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/pci0001:10/0001:10:17.0/input/input4/event4
E: ID_INPUT=1
E: ID_PATH=pci-0001:10:17.0
E: ID_PATH_TAG=pci-0001_10_17_0
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=27425187
P: /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
E: DEVPATH=/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
E: EV=17
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Kensington_Ci75m_Wireless_Notebook_Mouse
E: ID_MODEL_ENC=Kensington\x20Ci75m\x20Wireless\x20Notebook\x20Mouse
E: ID_MODEL_ID=1048
E: ID_PATH=pci-0001:10:18.0-usb-0:1.1:1.0
E: ID_PATH_TAG=pci-0001_10_18_0-usb-0_1_1_1_0
E: ID_REVISION=0112
E: ID_SERIAL=Kensington_Kensington_Ci75m_Wireless_Notebook_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Kensington
E: ID_VENDOR_ENC=Kensington
E: ID_VENDOR_ID=047d
E: KEY=70000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0003v047Dp1048e0110-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw
E: MSC=10
E: NAME="Kensington Kensington Ci75m Wireless Notebook Mouse"
E: PHYS="usb-0001:10:18.0-1.1/input0"
E: PRODUCT=3/47d/1048/110
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: UNIQ=""
E: USEC_INITIALIZED=20416499
P: /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1/event1
N: input/event1
S: input/by-id/usb-Kensington_Kensington_Ci75m_Wireless_Notebook_Mouse-event-mouse
S: input/by-path/pci-0001:10:18.0-usb-0:1.1:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Kensington_Kensington_Ci75m_Wireless_Notebook_Mouse-event-mouse /dev/input/by-path/pci-0001:10:18.0-usb-0:1.1:1.0-event-mouse
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1/event1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Kensington_Ci75m_Wireless_Notebook_Mouse
E: ID_MODEL_ENC=Kensington\x20Ci75m\x20Wireless\x20Notebook\x20Mouse
E: ID_MODEL_ID=1048
E: ID_PATH=pci-0001:10:18.0-usb-0:1.1:1.0
E: ID_PATH_TAG=pci-0001_10_18_0-usb-0_1_1_1_0
E: ID_REVISION=0112
E: ID_SERIAL=Kensington_Kensington_Ci75m_Wireless_Notebook_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Kensington
E: ID_VENDOR_ENC=Kensington
E: ID_VENDOR_ID=047d
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=20787868
P: /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1/mouse0
N: input/mouse0
S: input/by-id/usb-Kensington_Kensington_Ci75m_Wireless_Notebook_Mouse-mouse
S: input/by-path/pci-0001:10:18.0-usb-0:1.1:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-Kensington_Kensington_Ci75m_Wireless_Notebook_Mouse-mouse /dev/input/by-path/pci-0001:10:18.0-usb-0:1.1:1.0-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=Kensington_Ci75m_Wireless_Notebook_Mouse
E: ID_MODEL_ENC=Kensington\x20Ci75m\x20Wireless\x20Notebook\x20Mouse
E: ID_MODEL_ID=1048
E: ID_PATH=pci-0001:10:18.0-usb-0:1.1:1.0
E: ID_PATH_TAG=pci-0001_10_18_0-usb-0_1_1_1_0
E: ID_REVISION=0112
E: ID_SERIAL=Kensington_Kensington_Ci75m_Wireless_Notebook_Mouse
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Kensington
E: ID_VENDOR_ENC=Kensington
E: ID_VENDOR_ID=047d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=20815382
P: /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input2
E: DEVPATH=/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input2
E: EV=120013
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Apple_Extended_USB_Keyboard
E: ID_MODEL_ENC=Apple\x20Extended\x20USB\x20Keyboard
E: ID_MODEL_ID=0204
E: ID_PATH=pci-0001:10:18.0-usb-0:1.3.1:1.0
E: ID_PATH_TAG=pci-0001_10_18_0-usb-0_1_3_1_1_0
E: ID_REVISION=0122
E: ID_SERIAL=Mitsumi_Electric_Apple_Extended_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Mitsumi_Electric
E: ID_VENDOR_ENC=Mitsumi\x20Electric
E: ID_VENDOR_ID=05ac
E: KEY=10000 7 ff9f207a c14057ff febeffdf ffefffff ffffffff fffffffe
E: LED=1f
E: MODALIAS=input:b0003v05ACp0204e0110-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,3,4,sfw
E: MSC=10
E: NAME="Mitsumi Electric Apple Extended USB Keyboard"
E: PHYS="usb-0001:10:18.0-1.3.1/input0"
E: PRODUCT=3/5ac/204/110
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: UNIQ=""
E: USEC_INITIALIZED=20494368
P: /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input2/event2
N: input/event2
S: input/by-id/usb-Mitsumi_Electric_Apple_Extended_USB_Keyboard-event-kbd
S: input/by-path/pci-0001:10:18.0-usb-0:1.3.1:1.0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Mitsumi_Electric_Apple_Extended_USB_Keyboard-event-kbd /dev/input/by-path/pci-0001:10:18.0-usb-0:1.3.1:1.0-event-kbd
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input2/event2
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Apple_Extended_USB_Keyboard
E: ID_MODEL_ENC=Apple\x20Extended\x20USB\x20Keyboard
E: ID_MODEL_ID=0204
E: ID_PATH=pci-0001:10:18.0-usb-0:1.3.1:1.0
E: ID_PATH_TAG=pci-0001_10_18_0-usb-0_1_3_1_1_0
E: ID_REVISION=0122
E: ID_SERIAL=Mitsumi_Electric_Apple_Extended_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Mitsumi_Electric
E: ID_VENDOR_ENC=Mitsumi\x20Electric
E: ID_VENDOR_ID=05ac
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=20832674
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/input/input3
E: DEVPATH=/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/input/input3
E: EV=13
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Apple_Extended_USB_Keyboard
E: ID_MODEL_ENC=Apple\x20Extended\x20USB\x20Keyboard
E: ID_MODEL_ID=0204
E: ID_PATH=pci-0001:10:18.0-usb-0:1.3.1:1.1
E: ID_PATH_TAG=pci-0001_10_18_0-usb-0_1_3_1_1_1
E: ID_REVISION=0122
E: ID_SERIAL=Mitsumi_Electric_Apple_Extended_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Mitsumi_Electric
E: ID_VENDOR_ENC=Mitsumi\x20Electric
E: ID_VENDOR_ID=05ac
E: KEY=10000 17a 840c000 e0000 0 0 0
E: MODALIAS=input:b0003v05ACp0204e0110-e0,1,4,k71,72,73,8E,8F,96,9B,A1,A3,A4,A5,A6,A8,D0,ram4,lsfw
E: MSC=10
E: NAME="Mitsumi Electric Apple Extended USB Keyboard"
E: PHYS="usb-0001:10:18.0-1.3.1/input1"
E: PRODUCT=3/5ac/204/110
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: UNIQ=""
E: USEC_INITIALIZED=20721872
P: /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/input/input3/event3
N: input/event3
S: input/by-id/usb-Mitsumi_Electric_Apple_Extended_USB_Keyboard-event-if01
S: input/by-path/pci-0001:10:18.0-usb-0:1.3.1:1.1-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Mitsumi_Electric_Apple_Extended_USB_Keyboard-event-if01 /dev/input/by-path/pci-0001:10:18.0-usb-0:1.3.1:1.1-event
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/input/input3/event3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=Apple_Extended_USB_Keyboard
E: ID_MODEL_ENC=Apple\x20Extended\x20USB\x20Keyboard
E: ID_MODEL_ID=0204
E: ID_PATH=pci-0001:10:18.0-usb-0:1.3.1:1.1
E: ID_PATH_TAG=pci-0001_10_18_0-usb-0_1_3_1_1_1
E: ID_REVISION=0122
E: ID_SERIAL=Mitsumi_Electric_Apple_Extended_USB_Keyboard
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Mitsumi_Electric
E: ID_VENDOR_ENC=Mitsumi\x20Electric
E: ID_VENDOR_ID=05ac
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=21135270
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/virtual/input/input0
E: DEVPATH=/devices/virtual/input/input0
E: EV=23
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0001p0001e0100-e0,1,5,k74,ramlsfw0,
E: NAME="PMU"
E: PRODUCT=19/1/1/100
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: UDEV_LOG=3
E: USEC_INITIALIZED=18926085
P: /devices/virtual/input/input0/event0
N: input/event0
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/virtual/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=20295061
E: XKBLAYOUT=us
E: XKBMODEL=pc105
DRM Information from dmesg:
---------------------------
[ 1.235732] aty128fb: Rage128 TR Ultra AGP [chip rev 0x4] 16M 128-bit SDR SGRAM (1:1)
[ 1.268294] fb0: ATY Rage128 frame buffer device on Rage128 TR Ultra AGP
[ 1.273062] Linux agpgart interface v0.103
[ 1.273286] agpgart-uninorth 0000:00:0b.0: Apple UniNorth/Pangea chipset
[ 1.276105] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64
[ 1.276570] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0
[ 49.328700] [drm] Initialized drm 1.1.0 20060810
[ 49.368604] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 49.368630] [drm] No driver support for vblank timestamp query.
[ 49.368648] [drm] Initialized r128 2.5.0 20030725 for 0000:00:10.0 on minor 0
-- System Information:
Debian Release: 7.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: powerpc (ppc)
Kernel: Linux 3.2.0-4-powerpc-smp (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-r128 depends on:
ii libc6 2.13-38
ii xserver-xorg-core [xorg-video-abi-12] 2:1.12.4-6
xserver-xorg-video-r128 recommends no packages.
Versions of packages xserver-xorg-video-r128 suggests:
pn firmware-linux <none>
-- no debconf information
Reply to: