Bug#718595: x11-common: Graphical and console display scrambled on resume from sleep/hibernate
Package: x11-common
Version: 1:7.7+3~deb7u1
Severity: important
Dear Maintainer,
I've installed Debian on a Acer Aspire One D270-1998 netbook with good results
out of the box. I've got xfce4 going.
Problem is that I am hibernating or sleeping with no success on resume. The
system restores from hibernation/sleep but the display is scrambled, looking
like block text scrambled and pulsating or changing sometimes.
No response to ctrl-alt-f1 for console but X restarts with alt-sysrq-k bringing
up black screen then the display manager allowing login again with exception of
screen being in low resolution and consequently only showing top left quadrant
of display manager interface and background. At this point I can switch to
console ctrl-alt-f1 and although the console text is scrambled and impossible
to read I can log in and save dmesg logs etc which don't show anything on
reboot except successful resume.
Of relevance may be that with projector attached to same netbook part of the
lower projector display is scrambled and random even though I'm on a fresh
reboot and the monitor display is intact.
Expected response: resuming with graphics intact.
I'm not sure where to direct this bug, and haven't found anything on forums
that's directly relevant that I can understand. My appologies if this is
redundant with existing sources.
Ay help would be appreciated :)
-- System Information:
Debian Release: 7.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages x11-common depends on:
ii debconf [debconf-2.0] 1.5.49
ii lsb-base 4.1+Debian8+deb7u1
x11-common recommends no packages.
x11-common suggests no packages.
-- debconf information:
x11-common/xwrapper/actual_allowed_users: console
x11-common/xwrapper/allowed_users: Console Users Only
*** /home/eric/Xorg.0.log-beforeHibernate
[ 26.954]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 26.954] X Protocol Version 11, Revision 0
[ 26.954] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 26.954] Current Operating System: Linux edog 3.2.0-4-amd64 #1 SMP Debian
3.2.46-1 x86_64
[ 26.954] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=b81d6d03-9357-487f-9977-3f1f1122921f ro quiet
[ 26.955] Build Date: 17 April 2013 10:22:47AM
[ 26.955] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>)
[ 26.955] Current version of pixman: 0.26.0
[ 26.955] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 26.955] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 26.955] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 31 20:29:06
2013
[ 26.984] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.043] (==) No Layout section. Using the first Screen section.
[ 27.043] (==) No screen section available. Using defaults.
[ 27.043] (**) |-->Screen "Default Screen Section" (0)
[ 27.043] (**) | |-->Monitor "<default monitor>"
[ 27.044] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 27.044] (==) Automatically adding devices
[ 27.044] (==) Automatically enabling devices
[ 27.088] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 27.088] Entry deleted from font path.
[ 27.103] (WW) The directory "/var/lib/defoma/x-ttcidfont-
conf.d/dirs/TrueType" does not exist.
[ 27.103] Entry deleted from font path.
[ 27.103] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 27.103] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 27.103] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 27.103] (II) Loader magic: 0x7f4e67b57ae0
[ 27.103] (II) Module ABI versions:
[ 27.103] X.Org ANSI C Emulation: 0.4
[ 27.104] X.Org Video Driver: 12.1
[ 27.104] X.Org XInput driver : 16.0
[ 27.104] X.Org Server Extension : 6.0
[ 27.106] (--) PCI:*(0:0:2:0) 8086:0be1:1025:061f rev 9, Mem @
0x46000000/1048576, I/O @ 0x000050d0/8
[ 27.106] (II) Open ACPI successful (/var/run/acpid.socket)
[ 27.106] (II) LoadModule: "extmod"
[ 27.160] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 27.173] (II) Module extmod: vendor="X.Org Foundation"
[ 27.173] compiled for 1.12.4, module version = 1.0.0
[ 27.173] Module class: X.Org Server Extension
[ 27.173] ABI class: X.Org Server Extension, version 6.0
[ 27.173] (II) Loading extension SELinux
[ 27.173] (II) Loading extension MIT-SCREEN-SAVER
[ 27.173] (II) Loading extension XFree86-VidModeExtension
[ 27.173] (II) Loading extension XFree86-DGA
[ 27.173] (II) Loading extension DPMS
[ 27.173] (II) Loading extension XVideo
[ 27.173] (II) Loading extension XVideo-MotionCompensation
[ 27.173] (II) Loading extension X-Resource
[ 27.173] (II) LoadModule: "dbe"
[ 27.174] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 27.182] (II) Module dbe: vendor="X.Org Foundation"
[ 27.182] compiled for 1.12.4, module version = 1.0.0
[ 27.182] Module class: X.Org Server Extension
[ 27.182] ABI class: X.Org Server Extension, version 6.0
[ 27.182] (II) Loading extension DOUBLE-BUFFER
[ 27.182] (II) LoadModule: "glx"
[ 27.182] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.201] (II) Module glx: vendor="X.Org Foundation"
[ 27.201] compiled for 1.12.4, module version = 1.0.0
[ 27.201] ABI class: X.Org Server Extension, version 6.0
[ 27.201] (==) AIGLX enabled
[ 27.203] (II) Loading extension GLX
[ 27.203] (II) LoadModule: "record"
[ 27.203] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 27.214] (II) Module record: vendor="X.Org Foundation"
[ 27.214] compiled for 1.12.4, module version = 1.13.0
[ 27.214] Module class: X.Org Server Extension
[ 27.214] ABI class: X.Org Server Extension, version 6.0
[ 27.214] (II) Loading extension RECORD
[ 27.215] (II) LoadModule: "dri"
[ 27.215] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 27.223] (II) Module dri: vendor="X.Org Foundation"
[ 27.223] compiled for 1.12.4, module version = 1.0.0
[ 27.223] ABI class: X.Org Server Extension, version 6.0
[ 27.223] (II) Loading extension XFree86-DRI
[ 27.223] (II) LoadModule: "dri2"
[ 27.224] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 27.225] (II) Module dri2: vendor="X.Org Foundation"
[ 27.226] compiled for 1.12.4, module version = 1.2.0
[ 27.226] ABI class: X.Org Server Extension, version 6.0
[ 27.226] (II) Loading extension DRI2
[ 27.226] (==) Matched intel as autoconfigured driver 0
[ 27.226] (==) Matched vesa as autoconfigured driver 1
[ 27.226] (==) Matched fbdev as autoconfigured driver 2
[ 27.226] (==) Assigned the driver to the xf86ConfigLayout
[ 27.226] (II) LoadModule: "intel"
[ 27.230] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 27.293] (II) Module intel: vendor="X.Org Foundation"
[ 27.293] compiled for 1.12.3.902, module version = 2.19.0
[ 27.294] Module class: X.Org Video Driver
[ 27.294] ABI class: X.Org Video Driver, version 12.1
[ 27.294] (II) LoadModule: "vesa"
[ 27.294] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 27.313] (II) Module vesa: vendor="X.Org Foundation"
[ 27.313] compiled for 1.12.1, module version = 2.3.1
[ 27.313] Module class: X.Org Video Driver
[ 27.313] ABI class: X.Org Video Driver, version 12.0
[ 27.313] (II) LoadModule: "fbdev"
[ 27.314] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 27.327] (II) Module fbdev: vendor="X.Org Foundation"
[ 27.327] compiled for 1.12.1, module version = 0.4.2
[ 27.327] ABI class: X.Org Video Driver, version 12.0
[ 27.327] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 27.330] (II) VESA: driver for VESA chipsets: vesa
[ 27.330] (II) FBDEV: driver for framebuffer: fbdev
[ 27.330] (++) using VT number 7
[ 27.348] vesa: Ignoring device with a bound kernel driver
[ 27.348] (WW) Falling back to old probe method for vesa
[ 27.348] (II) Loading sub module "fbdevhw"
[ 27.348] (II) LoadModule: "fbdevhw"
[ 27.350] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 27.358] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 27.358] compiled for 1.12.4, module version = 0.0.2
[ 27.358] ABI class: X.Org Video Driver, version 12.1
[ 27.358] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[ 27.358] (II) FBDEV(1): using default device
[ 27.358] (II) FBDEV(1): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 27.358] (==) FBDEV(1): Depth 24, (==) framebuffer bpp 32
[ 27.358] (==) FBDEV(1): RGB weight 888
[ 27.358] (==) FBDEV(1): Default visual is TrueColor
[ 27.358] (==) FBDEV(1): Using gamma correction (1.0, 1.0, 1.0)
[ 27.358] (II) FBDEV(1): hardware: psbfb (video memory: 2400kB)
[ 27.359] (II) FBDEV(1): checking modes against framebuffer device...
[ 27.359] (II) FBDEV(1): checking modes against monitor...
[ 27.359] (--) FBDEV(1): Virtual size is 1024x600 (pitch 1024)
[ 27.359] (**) FBDEV(1): Built-in mode "current"
[ 27.359] (==) FBDEV(1): DPI set to (96, 96)
[ 27.359] (II) Loading sub module "fb"
[ 27.359] (II) LoadModule: "fb"
[ 27.359] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.369] (II) Module fb: vendor="X.Org Foundation"
[ 27.369] compiled for 1.12.4, module version = 1.0.0
[ 27.369] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.370] (**) FBDEV(1): using shadow framebuffer
[ 27.370] (II) Loading sub module "shadow"
[ 27.370] (II) LoadModule: "shadow"
[ 27.370] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 27.379] (II) Module shadow: vendor="X.Org Foundation"
[ 27.379] compiled for 1.12.4, module version = 1.1.0
[ 27.379] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.379] (II) UnloadModule: "vesa"
[ 27.380] (II) UnloadModule: "intel"
[ 27.380] (II) Unloading intel
[ 27.380] (==) Depth 24 pixmap format is 32 bpp
[ 27.669] (==) FBDEV(0): Backing store disabled
[ 27.677] (==) FBDEV(0): DPMS enabled
[ 27.678] (==) RandR enabled
[ 27.678] (II) Initializing built-in extension Generic Event Extension
[ 27.678] (II) Initializing built-in extension SHAPE
[ 27.678] (II) Initializing built-in extension MIT-SHM
[ 27.678] (II) Initializing built-in extension XInputExtension
[ 27.678] (II) Initializing built-in extension XTEST
[ 27.678] (II) Initializing built-in extension BIG-REQUESTS
[ 27.679] (II) Initializing built-in extension SYNC
[ 27.679] (II) Initializing built-in extension XKEYBOARD
[ 27.679] (II) Initializing built-in extension XC-MISC
[ 27.679] (II) Initializing built-in extension SECURITY
[ 27.679] (II) Initializing built-in extension XINERAMA
[ 27.680] (II) Initializing built-in extension XFIXES
[ 27.680] (II) Initializing built-in extension RENDER
[ 27.680] (II) Initializing built-in extension RANDR
[ 27.680] (II) Initializing built-in extension COMPOSITE
[ 27.680] (II) Initializing built-in extension DAMAGE
[ 27.681] (II) SELinux: Disabled on system
[ 27.710] (II) AIGLX: Screen 0 is not DRI2 capable
[ 27.711] (II) AIGLX: Screen 0 is not DRI capable
[ 28.129] (II) AIGLX: Loaded and initialized swrast
[ 28.129] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 28.559] (II) config/udev: Adding input device Power Button
(/dev/input/event4)
[ 28.559] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.559] (II) LoadModule: "evdev"
[ 28.576] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.583] (II) Module evdev: vendor="X.Org Foundation"
[ 28.583] compiled for 1.12.1, module version = 2.7.0
[ 28.584] Module class: X.Org XInput Driver
[ 28.584] ABI class: X.Org XInput driver, version 16.0
[ 28.584] (II) Using input driver 'evdev' for 'Power Button'
[ 28.584] (**) Power Button: always reports core events
[ 28.584] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 28.585] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.585] (--) evdev: Power Button: Found keys
[ 28.585] (II) evdev: Power Button: Configuring as keyboard
[ 28.585] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 28.585] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 28.585] (**) Option "xkb_rules" "evdev"
[ 28.585] (**) Option "xkb_model" "pc105"
[ 28.586] (**) Option "xkb_layout" "us"
[ 28.590] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 28.590] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.590] (II) Using input driver 'evdev' for 'Power Button'
[ 28.590] (**) Power Button: always reports core events
[ 28.591] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 28.591] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.591] (--) evdev: Power Button: Found keys
[ 28.591] (II) evdev: Power Button: Configuring as keyboard
[ 28.591] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 28.591] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 7)
[ 28.592] (**) Option "xkb_rules" "evdev"
[ 28.592] (**) Option "xkb_model" "pc105"
[ 28.592] (**) Option "xkb_layout" "us"
[ 28.596] (II) config/udev: Adding input device Lid Switch
(/dev/input/event3)
[ 28.596] (II) No input driver specified, ignoring this device.
[ 28.596] (II) This device may have been added with another device file.
[ 28.598] (II) config/udev: Adding input device Sleep Button
(/dev/input/event2)
[ 28.599] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 28.599] (II) Using input driver 'evdev' for 'Sleep Button'
[ 28.599] (**) Sleep Button: always reports core events
[ 28.599] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 28.599] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 28.599] (--) evdev: Sleep Button: Found keys
[ 28.600] (II) evdev: Sleep Button: Configuring as keyboard
[ 28.600] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 28.600] (II) XINPUT: Adding extended input device "Sleep Button" (type:
KEYBOARD, id 8)
[ 28.600] (**) Option "xkb_rules" "evdev"
[ 28.600] (**) Option "xkb_model" "pc105"
[ 28.600] (**) Option "xkb_layout" "us"
[ 28.604] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event9)
[ 28.604] (II) No input driver specified, ignoring this device.
[ 28.604] (II) This device may have been added with another device file.
[ 28.605] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3
(/dev/input/event10)
[ 28.605] (II) No input driver specified, ignoring this device.
[ 28.605] (II) This device may have been added with another device file.
[ 28.606] (II) config/udev: Adding input device HDA Intel Mic
(/dev/input/event11)
[ 28.606] (II) No input driver specified, ignoring this device.
[ 28.606] (II) This device may have been added with another device file.
[ 28.607] (II) config/udev: Adding input device HDA Intel Headphone
(/dev/input/event12)
[ 28.607] (II) No input driver specified, ignoring this device.
[ 28.607] (II) This device may have been added with another device file.
[ 28.608] (II) config/udev: Adding input device WebCam (/dev/input/event8)
[ 28.608] (**) WebCam: Applying InputClass "evdev keyboard catchall"
[ 28.608] (II) Using input driver 'evdev' for 'WebCam'
[ 28.608] (**) WebCam: always reports core events
[ 28.608] (**) evdev: WebCam: Device: "/dev/input/event8"
[ 28.608] (--) evdev: WebCam: Vendor 0x4f2 Product 0xb367
[ 28.608] (--) evdev: WebCam: Found keys
[ 28.608] (II) evdev: WebCam: Configuring as keyboard
[ 28.609] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input8/event8"
[ 28.609] (II) XINPUT: Adding extended input device "WebCam" (type:
KEYBOARD, id 9)
[ 28.609] (**) Option "xkb_rules" "evdev"
[ 28.609] (**) Option "xkb_model" "pc105"
[ 28.609] (**) Option "xkb_layout" "us"
[ 28.610] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 28.610] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 28.611] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 28.611] (**) AT Translated Set 2 keyboard: always reports core events
[ 28.611] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0"
[ 28.611] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 28.611] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 28.611] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 28.611] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 28.611] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 10)
[ 28.611] (**) Option "xkb_rules" "evdev"
[ 28.611] (**) Option "xkb_model" "pc105"
[ 28.611] (**) Option "xkb_layout" "us"
[ 28.613] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/event7)
[ 28.613] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
touchpad catchall"
[ 28.613] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad
catchall"
[ 28.613] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default
clickpad buttons"
[ 28.613] (II) LoadModule: "synaptics"
[ 28.614] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 28.642] (II) Module synaptics: vendor="X.Org Foundation"
[ 28.642] compiled for 1.12.4, module version = 1.6.2
[ 28.643] Module class: X.Org XInput Driver
[ 28.643] ABI class: X.Org XInput driver, version 16.0
[ 28.643] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics
TouchPad'
[ 28.643] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 28.643] (**) Option "Device" "/dev/input/event7"
[ 28.764] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events
for semi-multitouch device
[ 28.764] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 -
5612
[ 28.765] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 -
4618
[ 28.765] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 28.765] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 -
15
[ 28.765] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
double triple
[ 28.765] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 28.765] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 28.766] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 28.824] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio2/input/input7/event7"
[ 28.824] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics
TouchPad" (type: TOUCHPAD, id 11)
[ 28.825] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is
now constant deceleration 2.5
[ 28.825] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 28.825] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now
0.038
[ 28.827] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration
scheme 1
[ 28.827] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 28.827] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor:
2.000
[ 28.827] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 28.828] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 28.829] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/mouse0)
[ 28.830] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass
"touchpad ignore duplicates"
[ 28.832] (II) config/udev: Adding input device PC Speaker
(/dev/input/event5)
[ 28.832] (II) No input driver specified, ignoring this device.
[ 28.832] (II) This device may have been added with another device file.
[ 28.836] (II) config/udev: Adding input device ACPI Virtual Keyboard Device
(/dev/input/event13)
[ 28.837] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev
keyboard catchall"
[ 28.837] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 28.837] (**) ACPI Virtual Keyboard Device: always reports core events
[ 28.837] (**) evdev: ACPI Virtual Keyboard Device: Device:
"/dev/input/event13"
[ 28.837] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 28.838] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 28.838] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 28.838] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input13/event13"
[ 28.838] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard
Device" (type: KEYBOARD, id 12)
[ 28.838] (**) Option "xkb_rules" "evdev"
[ 28.838] (**) Option "xkb_model" "pc105"
[ 28.838] (**) Option "xkb_layout" "us"
[ 28.842] (II) config/udev: Adding input device Acer WMI hotkeys
(/dev/input/event6)
[ 28.843] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard
catchall"
[ 28.843] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 28.843] (**) Acer WMI hotkeys: always reports core events
[ 28.843] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event6"
[ 28.843] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 28.843] (--) evdev: Acer WMI hotkeys: Found keys
[ 28.844] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 28.844] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input6/event6"
[ 28.844] (II) XINPUT: Adding extended input device "Acer WMI hotkeys"
(type: KEYBOARD, id 13)
[ 28.844] (**) Option "xkb_rules" "evdev"
[ 28.844] (**) Option "xkb_model" "pc105"
[ 28.844] (**) Option "xkb_layout" "us"
*** /home/eric/Xorg.0.log-afterhibernate
[ 2132.993]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 2132.993] X Protocol Version 11, Revision 0
[ 2132.993] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 2132.993] Current Operating System: Linux edog 3.2.0-4-amd64 #1 SMP Debian
3.2.46-1 x86_64
[ 2132.993] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64
root=UUID=b81d6d03-9357-487f-9977-3f1f1122921f ro quiet
[ 2132.993] Build Date: 17 April 2013 10:22:47AM
[ 2132.993] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>)
[ 2132.994] Current version of pixman: 0.26.0
[ 2132.994] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2132.994] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2132.994] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 31 21:04:49
2013
[ 2132.995] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2133.039] (==) No Layout section. Using the first Screen section.
[ 2133.039] (==) No screen section available. Using defaults.
[ 2133.039] (**) |-->Screen "Default Screen Section" (0)
[ 2133.039] (**) | |-->Monitor "<default monitor>"
[ 2133.040] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2133.040] (==) Automatically adding devices
[ 2133.040] (==) Automatically enabling devices
[ 2133.051] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 2133.051] Entry deleted from font path.
[ 2133.052] (WW) The directory "/var/lib/defoma/x-ttcidfont-
conf.d/dirs/TrueType" does not exist.
[ 2133.052] Entry deleted from font path.
[ 2133.052] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 2133.052] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2133.052] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 2133.052] (II) Loader magic: 0x7fd588cd6ae0
[ 2133.052] (II) Module ABI versions:
[ 2133.052] X.Org ANSI C Emulation: 0.4
[ 2133.052] X.Org Video Driver: 12.1
[ 2133.052] X.Org XInput driver : 16.0
[ 2133.052] X.Org Server Extension : 6.0
[ 2133.054] (--) PCI:*(0:0:2:0) 8086:0be1:1025:061f rev 9, Mem @
0x46000000/1048576, I/O @ 0x000050d0/8
[ 2133.054] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2133.054] (II) LoadModule: "extmod"
[ 2133.055] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2133.069] (II) Module extmod: vendor="X.Org Foundation"
[ 2133.069] compiled for 1.12.4, module version = 1.0.0
[ 2133.069] Module class: X.Org Server Extension
[ 2133.069] ABI class: X.Org Server Extension, version 6.0
[ 2133.069] (II) Loading extension SELinux
[ 2133.069] (II) Loading extension MIT-SCREEN-SAVER
[ 2133.069] (II) Loading extension XFree86-VidModeExtension
[ 2133.069] (II) Loading extension XFree86-DGA
[ 2133.069] (II) Loading extension DPMS
[ 2133.069] (II) Loading extension XVideo
[ 2133.069] (II) Loading extension XVideo-MotionCompensation
[ 2133.069] (II) Loading extension X-Resource
[ 2133.069] (II) LoadModule: "dbe"
[ 2133.069] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2133.078] (II) Module dbe: vendor="X.Org Foundation"
[ 2133.078] compiled for 1.12.4, module version = 1.0.0
[ 2133.078] Module class: X.Org Server Extension
[ 2133.078] ABI class: X.Org Server Extension, version 6.0
[ 2133.078] (II) Loading extension DOUBLE-BUFFER
[ 2133.078] (II) LoadModule: "glx"
[ 2133.078] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2133.090] (II) Module glx: vendor="X.Org Foundation"
[ 2133.090] compiled for 1.12.4, module version = 1.0.0
[ 2133.090] ABI class: X.Org Server Extension, version 6.0
[ 2133.090] (==) AIGLX enabled
[ 2133.090] (II) Loading extension GLX
[ 2133.090] (II) LoadModule: "record"
[ 2133.090] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2133.099] (II) Module record: vendor="X.Org Foundation"
[ 2133.099] compiled for 1.12.4, module version = 1.13.0
[ 2133.099] Module class: X.Org Server Extension
[ 2133.099] ABI class: X.Org Server Extension, version 6.0
[ 2133.099] (II) Loading extension RECORD
[ 2133.099] (II) LoadModule: "dri"
[ 2133.099] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2133.108] (II) Module dri: vendor="X.Org Foundation"
[ 2133.108] compiled for 1.12.4, module version = 1.0.0
[ 2133.108] ABI class: X.Org Server Extension, version 6.0
[ 2133.108] (II) Loading extension XFree86-DRI
[ 2133.108] (II) LoadModule: "dri2"
[ 2133.108] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2133.109] (II) Module dri2: vendor="X.Org Foundation"
[ 2133.109] compiled for 1.12.4, module version = 1.2.0
[ 2133.109] ABI class: X.Org Server Extension, version 6.0
[ 2133.109] (II) Loading extension DRI2
[ 2133.109] (==) Matched intel as autoconfigured driver 0
[ 2133.109] (==) Matched vesa as autoconfigured driver 1
[ 2133.109] (==) Matched fbdev as autoconfigured driver 2
[ 2133.109] (==) Assigned the driver to the xf86ConfigLayout
[ 2133.109] (II) LoadModule: "intel"
[ 2133.110] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2133.168] (II) Module intel: vendor="X.Org Foundation"
[ 2133.168] compiled for 1.12.3.902, module version = 2.19.0
[ 2133.168] Module class: X.Org Video Driver
[ 2133.168] ABI class: X.Org Video Driver, version 12.1
[ 2133.168] (II) LoadModule: "vesa"
[ 2133.168] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 2133.169] (II) Module vesa: vendor="X.Org Foundation"
[ 2133.169] compiled for 1.12.1, module version = 2.3.1
[ 2133.169] Module class: X.Org Video Driver
[ 2133.169] ABI class: X.Org Video Driver, version 12.0
[ 2133.169] (II) LoadModule: "fbdev"
[ 2133.169] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 2133.170] (II) Module fbdev: vendor="X.Org Foundation"
[ 2133.170] compiled for 1.12.1, module version = 0.4.2
[ 2133.170] ABI class: X.Org Video Driver, version 12.0
[ 2133.170] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 2133.173] (II) VESA: driver for VESA chipsets: vesa
[ 2133.173] (II) FBDEV: driver for framebuffer: fbdev
[ 2133.173] (++) using VT number 8
[ 2133.182] vesa: Ignoring device with a bound kernel driver
[ 2133.182] (WW) Falling back to old probe method for vesa
[ 2133.182] (II) Loading sub module "fbdevhw"
[ 2133.182] (II) LoadModule: "fbdevhw"
[ 2133.185] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 2133.186] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 2133.186] compiled for 1.12.4, module version = 0.0.2
[ 2133.186] ABI class: X.Org Video Driver, version 12.1
[ 2133.187] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[ 2133.187] (II) FBDEV(1): using default device
[ 2133.187] (II) FBDEV(1): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 2133.187] (==) FBDEV(1): Depth 24, (==) framebuffer bpp 32
[ 2133.187] (==) FBDEV(1): RGB weight 888
[ 2133.188] (==) FBDEV(1): Default visual is TrueColor
[ 2133.188] (==) FBDEV(1): Using gamma correction (1.0, 1.0, 1.0)
[ 2133.188] (II) FBDEV(1): hardware: psbfb (video memory: 2400kB)
[ 2133.188] (II) FBDEV(1): checking modes against framebuffer device...
[ 2133.188] (II) FBDEV(1): checking modes against monitor...
[ 2133.189] (--) FBDEV(1): Virtual size is 1024x600 (pitch 1024)
[ 2133.189] (**) FBDEV(1): Built-in mode "current"
[ 2133.189] (==) FBDEV(1): DPI set to (96, 96)
[ 2133.189] (II) Loading sub module "fb"
[ 2133.189] (II) LoadModule: "fb"
[ 2133.190] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2133.199] (II) Module fb: vendor="X.Org Foundation"
[ 2133.199] compiled for 1.12.4, module version = 1.0.0
[ 2133.199] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2133.199] (**) FBDEV(1): using shadow framebuffer
[ 2133.199] (II) Loading sub module "shadow"
[ 2133.199] (II) LoadModule: "shadow"
[ 2133.200] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 2133.201] (II) Module shadow: vendor="X.Org Foundation"
[ 2133.201] compiled for 1.12.4, module version = 1.1.0
[ 2133.201] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2133.201] (II) UnloadModule: "vesa"
[ 2133.201] (II) UnloadModule: "intel"
[ 2133.201] (II) Unloading intel
[ 2133.202] (==) Depth 24 pixmap format is 32 bpp
[ 2133.453] (==) FBDEV(0): Backing store disabled
[ 2133.454] (==) FBDEV(0): DPMS enabled
[ 2133.454] (==) RandR enabled
[ 2133.454] (II) Initializing built-in extension Generic Event Extension
[ 2133.454] (II) Initializing built-in extension SHAPE
[ 2133.454] (II) Initializing built-in extension MIT-SHM
[ 2133.454] (II) Initializing built-in extension XInputExtension
[ 2133.454] (II) Initializing built-in extension XTEST
[ 2133.454] (II) Initializing built-in extension BIG-REQUESTS
[ 2133.454] (II) Initializing built-in extension SYNC
[ 2133.454] (II) Initializing built-in extension XKEYBOARD
[ 2133.454] (II) Initializing built-in extension XC-MISC
[ 2133.454] (II) Initializing built-in extension SECURITY
[ 2133.454] (II) Initializing built-in extension XINERAMA
[ 2133.454] (II) Initializing built-in extension XFIXES
[ 2133.454] (II) Initializing built-in extension RENDER
[ 2133.454] (II) Initializing built-in extension RANDR
[ 2133.454] (II) Initializing built-in extension COMPOSITE
[ 2133.454] (II) Initializing built-in extension DAMAGE
[ 2133.455] (II) SELinux: Disabled on system
[ 2133.479] (II) AIGLX: Screen 0 is not DRI2 capable
[ 2133.480] (II) AIGLX: Screen 0 is not DRI capable
[ 2133.549] (II) AIGLX: Loaded and initialized swrast
[ 2133.549] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 2133.880] (II) config/udev: Adding input device Power Button
(/dev/input/event4)
[ 2133.880] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2133.880] (II) LoadModule: "evdev"
[ 2133.881] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2133.890] (II) Module evdev: vendor="X.Org Foundation"
[ 2133.891] compiled for 1.12.1, module version = 2.7.0
[ 2133.891] Module class: X.Org XInput Driver
[ 2133.891] ABI class: X.Org XInput driver, version 16.0
[ 2133.891] (II) Using input driver 'evdev' for 'Power Button'
[ 2133.891] (**) Power Button: always reports core events
[ 2133.891] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 2133.891] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2133.891] (--) evdev: Power Button: Found keys
[ 2133.891] (II) evdev: Power Button: Configuring as keyboard
[ 2133.891] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 2133.891] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 2133.891] (**) Option "xkb_rules" "evdev"
[ 2133.891] (**) Option "xkb_model" "pc105"
[ 2133.891] (**) Option "xkb_layout" "us"
[ 2133.893] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 2133.893] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2133.893] (II) Using input driver 'evdev' for 'Power Button'
[ 2133.893] (**) Power Button: always reports core events
[ 2133.893] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 2133.893] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2133.894] (--) evdev: Power Button: Found keys
[ 2133.894] (II) evdev: Power Button: Configuring as keyboard
[ 2133.894] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 2133.894] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 7)
[ 2133.894] (**) Option "xkb_rules" "evdev"
[ 2133.894] (**) Option "xkb_model" "pc105"
[ 2133.894] (**) Option "xkb_layout" "us"
[ 2133.896] (II) config/udev: Adding input device Lid Switch
(/dev/input/event3)
[ 2133.896] (II) No input driver specified, ignoring this device.
[ 2133.896] (II) This device may have been added with another device file.
[ 2133.897] (II) config/udev: Adding input device Sleep Button
(/dev/input/event2)
[ 2133.897] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2133.897] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2133.897] (**) Sleep Button: always reports core events
[ 2133.897] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 2133.897] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 2133.897] (--) evdev: Sleep Button: Found keys
[ 2133.897] (II) evdev: Sleep Button: Configuring as keyboard
[ 2133.897] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 2133.898] (II) XINPUT: Adding extended input device "Sleep Button" (type:
KEYBOARD, id 8)
[ 2133.898] (**) Option "xkb_rules" "evdev"
[ 2133.898] (**) Option "xkb_model" "pc105"
[ 2133.898] (**) Option "xkb_layout" "us"
[ 2133.899] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event9)
[ 2133.899] (II) No input driver specified, ignoring this device.
[ 2133.899] (II) This device may have been added with another device file.
[ 2133.900] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3
(/dev/input/event10)
[ 2133.900] (II) No input driver specified, ignoring this device.
[ 2133.900] (II) This device may have been added with another device file.
[ 2133.901] (II) config/udev: Adding input device HDA Intel Mic
(/dev/input/event11)
[ 2133.901] (II) No input driver specified, ignoring this device.
[ 2133.901] (II) This device may have been added with another device file.
[ 2133.902] (II) config/udev: Adding input device HDA Intel Headphone
(/dev/input/event12)
[ 2133.902] (II) No input driver specified, ignoring this device.
[ 2133.902] (II) This device may have been added with another device file.
[ 2133.903] (II) config/udev: Adding input device WebCam (/dev/input/event8)
[ 2133.903] (**) WebCam: Applying InputClass "evdev keyboard catchall"
[ 2133.903] (II) Using input driver 'evdev' for 'WebCam'
[ 2133.904] (**) WebCam: always reports core events
[ 2133.904] (**) evdev: WebCam: Device: "/dev/input/event8"
[ 2133.904] (--) evdev: WebCam: Vendor 0x4f2 Product 0xb367
[ 2133.904] (--) evdev: WebCam: Found keys
[ 2133.904] (II) evdev: WebCam: Configuring as keyboard
[ 2133.904] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input8/event8"
[ 2133.904] (II) XINPUT: Adding extended input device "WebCam" (type:
KEYBOARD, id 9)
[ 2133.904] (**) Option "xkb_rules" "evdev"
[ 2133.904] (**) Option "xkb_model" "pc105"
[ 2133.904] (**) Option "xkb_layout" "us"
[ 2133.906] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 2133.906] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 2133.906] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2133.906] (**) AT Translated Set 2 keyboard: always reports core events
[ 2133.906] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0"
[ 2133.906] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2133.906] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2133.906] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2133.906] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2133.906] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 10)
[ 2133.906] (**) Option "xkb_rules" "evdev"
[ 2133.906] (**) Option "xkb_model" "pc105"
[ 2133.907] (**) Option "xkb_layout" "us"
[ 2133.908] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/event7)
[ 2133.908] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
touchpad catchall"
[ 2133.908] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad
catchall"
[ 2133.908] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default
clickpad buttons"
[ 2133.908] (II) LoadModule: "synaptics"
[ 2133.909] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2133.939] (II) Module synaptics: vendor="X.Org Foundation"
[ 2133.939] compiled for 1.12.4, module version = 1.6.2
[ 2133.939] Module class: X.Org XInput Driver
[ 2133.939] ABI class: X.Org XInput driver, version 16.0
[ 2133.939] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics
TouchPad'
[ 2133.939] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2133.939] (**) Option "Device" "/dev/input/event7"
[ 2133.948] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events
for semi-multitouch device
[ 2133.949] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 -
5612
[ 2133.949] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 -
4618
[ 2133.949] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2133.949] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 -
15
[ 2133.949] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
double triple
[ 2133.949] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2133.950] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2133.950] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2133.952] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio2/input/input7/event7"
[ 2133.952] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics
TouchPad" (type: TOUCHPAD, id 11)
[ 2133.952] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is
now constant deceleration 2.5
[ 2133.953] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 2133.953] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now
0.038
[ 2133.955] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration
scheme 1
[ 2133.955] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2133.955] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor:
2.000
[ 2133.955] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2133.955] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2133.957] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/mouse0)
[ 2133.958] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass
"touchpad ignore duplicates"
[ 2133.960] (II) config/udev: Adding input device PC Speaker
(/dev/input/event5)
[ 2133.960] (II) No input driver specified, ignoring this device.
[ 2133.960] (II) This device may have been added with another device file.
[ 2133.981] (II) config/udev: Adding input device ACPI Virtual Keyboard Device
(/dev/input/event13)
[ 2133.981] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev
keyboard catchall"
[ 2133.981] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 2133.981] (**) ACPI Virtual Keyboard Device: always reports core events
[ 2133.981] (**) evdev: ACPI Virtual Keyboard Device: Device:
"/dev/input/event13"
[ 2133.981] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 2133.981] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 2133.981] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 2133.982] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input13/event13"
[ 2133.982] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard
Device" (type: KEYBOARD, id 12)
[ 2133.982] (**) Option "xkb_rules" "evdev"
[ 2133.982] (**) Option "xkb_model" "pc105"
[ 2133.982] (**) Option "xkb_layout" "us"
[ 2133.983] (II) config/udev: Adding input device Acer WMI hotkeys
(/dev/input/event6)
[ 2133.983] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard
catchall"
[ 2133.983] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 2133.984] (**) Acer WMI hotkeys: always reports core events
[ 2133.984] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event6"
[ 2133.984] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 2133.984] (--) evdev: Acer WMI hotkeys: Found keys
[ 2133.984] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 2133.984] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input6/event6"
[ 2133.984] (II) XINPUT: Adding extended input device "Acer WMI hotkeys"
(type: KEYBOARD, id 13)
[ 2133.984] (**) Option "xkb_rules" "evdev"
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=b81d6d03-9357-487f-9977-3f1f1122921f ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f4af000 (usable)
[ 0.000000] BIOS-e820: 000000003f4af000 - 000000003f5af000 (reserved)
[ 0.000000] BIOS-e820: 000000003f5af000 - 000000003f6af000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6af000 - 000000003f6ef000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6ef000 - 000000003f6f0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6f0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer AOD270/JE01_CT , BIOS V1.06 03/05/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3f6f0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask FE0000000 write-back
[ 0.000000] 2 base 020000000 mask FE0000000 write-back
[ 0.000000] 3 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 base 03F6F0000 mask FFFFF0000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000fe260] fe260
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000003f6f0000
[ 0.000000] 0000000000 - 003f600000 page 2M
[ 0.000000] 003f600000 - 003f6f0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3f6f0000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 36562000 - 372a9000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 000000003f6ee120 0008C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 000000003f6ed000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 000000003f6e1000 0786E (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 000000003f675000 00040
[ 0.000000] ACPI: HPET 000000003f6ec000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 000000003f6eb000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 000000003f6ea000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: WDRT 000000003f6e9000 00047 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: SLIC 000000003f6e0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: BOOT 000000003f6df000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MSDM 000000003f6de000 00055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 000000003f6dc000 00090 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 000000003f6db000 00655 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 000000003f6da000 00259 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 000000003f6d9000 0020F (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: WDAT 000000003f6d8000 00194 (v01 INSYDE H2O BIOS 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003f6f0000
[ 0.000000] Initmem setup node 0 0000000000000000-000000003f6f0000
[ 0.000000] NODE_DATA [000000003f4aa000 - 000000003f4aefff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003dc00000-ffff88003e9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0003f4af
[ 0.000000] 0: 0x0003f6ef -> 0x0003f6f0
[ 0.000000] On node 0 totalpages: 259134
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3497 pages used for memmap
[ 0.000000] DMA32 zone: 251655 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000003f4af000 - 000000003f5af000
[ 0.000000] PM: Registered nosave memory: 000000003f5af000 - 000000003f6af000
[ 0.000000] PM: Registered nosave memory: 000000003f6af000 - 000000003f6ef000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003f200000 s82944 r8192 d23552 u524288
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255576
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=b81d6d03-9357-487f-9977-3f1f1122921f ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 999632k/1039296k available (3425k kernel code, 2760k absent, 36904k reserved, 3314k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 1595.786 MHz processor.
[ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.57 BogoMIPS (lpj=6383144)
[ 0.000018] pid_max: default: 32768 minimum: 301
[ 0.000146] Security Framework initialized
[ 0.000157] AppArmor: AppArmor disabled by boot time parameter
[ 0.000404] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.001455] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.001936] Mount-cache hash table entries: 256
[ 0.002270] Initializing cgroup subsys cpuacct
[ 0.002284] Initializing cgroup subsys memory
[ 0.002312] Initializing cgroup subsys devices
[ 0.002318] Initializing cgroup subsys freezer
[ 0.002326] Initializing cgroup subsys net_cls
[ 0.002332] Initializing cgroup subsys blkio
[ 0.002358] Initializing cgroup subsys perf_event
[ 0.002433] CPU: Physical Processor ID: 0
[ 0.002438] CPU: Processor Core ID: 0
[ 0.002443] mce: CPU supports 5 MCE banks
[ 0.002457] CPU0: Thermal monitoring handled by SMI
[ 0.002465] using mwait in idle threads.
[ 0.003184] ACPI: Core revision 20110623
[ 0.046308] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.085956] CPU0: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz stepping 01
[ 0.192528] Performance Events: PEBS fmt0+, generic architected perfmon, Intel PMU driver.
[ 0.192544] ... version: 3
[ 0.192548] ... bit width: 40
[ 0.192552] ... generic registers: 2
[ 0.192556] ... value mask: 000000ffffffffff
[ 0.192561] ... max period: 000000007fffffff
[ 0.192565] ... fixed-purpose events: 3
[ 0.192569] ... event mask: 0000000700000003
[ 0.193037] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.193493] Booting Node 0, Processors #1
[ 0.193500] smpboot cpu 1: start_ip = 99000
[ 0.280467] CPU1: Thermal monitoring handled by SMI
[ 0.300613] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.300964] #2
[ 0.300969] smpboot cpu 2: start_ip = 99000
[ 0.388361] CPU2: Thermal monitoring handled by SMI
[ 0.408455] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.408784] #3 Ok.
[ 0.408789] smpboot cpu 3: start_ip = 99000
[ 0.496256] CPU3: Thermal monitoring handled by SMI
[ 0.516370] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.516440] Brought up 4 CPUs
[ 0.516447] Total of 4 processors activated (12767.56 BogoMIPS).
[ 0.517967] devtmpfs: initialized
[ 0.524275] PM: Registering ACPI NVS region at 3f5af000 (1048576 bytes)
[ 0.524807] print_constraints: dummy:
[ 0.525021] NET: Registered protocol family 16
[ 0.525291] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.525298] ACPI: bus type pci registered
[ 0.525493] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.525501] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.573700] PCI: Using configuration type 1 for base access
[ 0.576306] bio: create slab <bio-0> at 0
[ 0.576709] ACPI: Added _OSI(Module Device)
[ 0.576716] ACPI: Added _OSI(Processor Device)
[ 0.576722] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.576728] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.579867] ACPI: EC: Look up EC in DSDT
[ 0.595270] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.636411] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.645548] ACPI: SSDT 000000003f567a90 002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
[ 0.646358] ACPI: Dynamic OEM Table Load:
[ 0.646366] ACPI: SSDT (null) 002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
[ 0.646849] ACPI: SSDT 000000003f566710 006DB (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.647626] ACPI: Dynamic OEM Table Load:
[ 0.647634] ACPI: SSDT (null) 006DB (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.673074] ACPI: SSDT 000000003f567e10 001CF (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.673950] ACPI: Dynamic OEM Table Load:
[ 0.673957] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.684462] ACPI: SSDT 000000003f565f10 0008D (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.685253] ACPI: Dynamic OEM Table Load:
[ 0.685261] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.698522] ACPI: Interpreter enabled
[ 0.698534] ACPI: (supports S0 S3 S4 S5)
[ 0.698603] ACPI: Using IOAPIC for interrupt routing
[ 0.713300] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.713731] ACPI: No dock devices found.
[ 0.713738] HEST: Table not found.
[ 0.713746] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.714404] \_SB_.PCI0:_OSC invalid UUID
[ 0.714409] _OSC request data:1 8 0
[ 0.714421] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.715308] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.715316] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.715323] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.715330] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.715337] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000effff]
[ 0.715343] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.715350] pci_root PNP0A08:00: host bridge window [mem 0x3f800000-0x3fffffff]
[ 0.715357] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[ 0.715387] pci 0000:00:00.0: [8086:0bf1] type 0 class 0x000600
[ 0.715463] pci 0000:00:02.0: [8086:0be1] type 0 class 0x000300
[ 0.715483] pci 0000:00:02.0: reg 10: [mem 0x46000000-0x460fffff]
[ 0.715494] pci 0000:00:02.0: reg 14: [io 0x50d0-0x50d7]
[ 0.715641] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.715677] pci 0000:00:1b.0: reg 10: [mem 0x46100000-0x46103fff 64bit]
[ 0.715829] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.715885] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.716069] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.716130] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.716311] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.716369] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.716526] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.716587] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.716670] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf]
[ 0.716741] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.716824] pci 0000:00:1d.1: reg 20: [io 0x5080-0x509f]
[ 0.716894] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.716977] pci 0000:00:1d.2: reg 20: [io 0x5060-0x507f]
[ 0.717053] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.717136] pci 0000:00:1d.3: reg 20: [io 0x5040-0x505f]
[ 0.717223] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.717261] pci 0000:00:1d.7: reg 10: [mem 0x46105000-0x461053ff]
[ 0.717409] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.717455] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.717595] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.717797] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[ 0.717834] pci 0000:00:1f.2: reg 10: [io 0x50c8-0x50cf]
[ 0.717854] pci 0000:00:1f.2: reg 14: [io 0x50dc-0x50df]
[ 0.717873] pci 0000:00:1f.2: reg 18: [io 0x50c0-0x50c7]
[ 0.717893] pci 0000:00:1f.2: reg 1c: [io 0x50d8-0x50db]
[ 0.717912] pci 0000:00:1f.2: reg 20: [io 0x5020-0x502f]
[ 0.717932] pci 0000:00:1f.2: reg 24: [mem 0x46104000-0x461043ff]
[ 0.718015] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.718054] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.718137] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
[ 0.718367] pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200
[ 0.718441] pci 0000:01:00.0: reg 10: [io 0x4000-0x40ff]
[ 0.718568] pci 0000:01:00.0: reg 18: [mem 0x40004000-0x40004fff 64bit pref]
[ 0.718649] pci 0000:01:00.0: reg 20: [mem 0x40000000-0x40003fff 64bit pref]
[ 0.718991] pci 0000:01:00.0: supports D1 D2
[ 0.718996] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.719211] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.719222] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.719232] pci 0000:00:1c.0: bridge window [mem 0x45000000-0x45ffffff]
[ 0.719246] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x40ffffff 64bit pref]
[ 0.719376] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280
[ 0.719414] pci 0000:02:00.0: reg 10: [mem 0x44000000-0x44003fff 64bit]
[ 0.719589] pci 0000:02:00.0: supports D1 D2
[ 0.719595] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.724086] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.724102] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.724117] pci 0000:00:1c.1: bridge window [mem 0x44000000-0x44ffffff]
[ 0.724132] pci 0000:00:1c.1: bridge window [mem 0x41000000-0x41ffffff 64bit pref]
[ 0.724341] pci 0000:03:00.0: [10ec:5209] type 0 class 0x00ff00
[ 0.724416] pci 0000:03:00.0: reg 10: [mem 0x43001000-0x43001fff]
[ 0.724965] pci 0000:03:00.0: supports D1 D2
[ 0.724970] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.725158] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.725168] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.725178] pci 0000:00:1c.2: bridge window [mem 0x43000000-0x43ffffff]
[ 0.725192] pci 0000:00:1c.2: bridge window [mem 0x42000000-0x42ffffff 64bit pref]
[ 0.725312] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.725335] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.725343] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.725350] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.725357] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.725369] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
[ 0.725376] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.725384] pci 0000:00:1e.0: bridge window [mem 0x3f800000-0x3fffffff] (subtractive decode)
[ 0.725391] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.725439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.725885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.726017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.726146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.726461] \_SB_.PCI0:_OSC invalid UUID
[ 0.726465] _OSC request data:1 1f 0
[ 0.726477] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.726615] \_SB_.PCI0:_OSC invalid UUID
[ 0.726619] _OSC request data:1 0 1d
[ 0.726630] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.726635] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.739382] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.739557] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.739725] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.739893] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.740084] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.740269] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.740439] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.740608] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.740948] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.740975] vgaarb: loaded
[ 0.740979] vgaarb: bridge control possible 0000:00:02.0
[ 0.741104] PCI: Using ACPI for IRQ routing
[ 0.755706] PCI: pci_cache_line_size set to 64 bytes
[ 0.755866] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.755874] reserve RAM buffer: 000000003f4af000 - 000000003fffffff
[ 0.755880] reserve RAM buffer: 000000003f6f0000 - 000000003fffffff
[ 0.756229] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.756241] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.758283] Switching to clocksource hpet
[ 0.763729] pnp: PnP ACPI init
[ 0.763774] ACPI: bus type pnp registered
[ 0.764259] pnp 00:00: [bus 00-ff]
[ 0.764267] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.764274] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.764280] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.764287] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.764293] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.764299] pnp 00:00: [mem 0x000e0000-0x000effff window]
[ 0.764306] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.764312] pnp 00:00: [mem 0x3f800000-0x3fffffff window]
[ 0.764319] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.764467] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.764568] pnp 00:01: [io 0x0060]
[ 0.764574] pnp 00:01: [io 0x0064]
[ 0.764596] pnp 00:01: [irq 1]
[ 0.764678] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.764736] pnp 00:02: [irq 12]
[ 0.764814] pnp 00:02: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active)
[ 0.764846] pnp 00:03: [io 0x0000-0x001f]
[ 0.764852] pnp 00:03: [io 0x0081-0x0091]
[ 0.764858] pnp 00:03: [io 0x0093-0x009f]
[ 0.764867] pnp 00:03: [io 0x00c0-0x00df]
[ 0.764874] pnp 00:03: [dma 4]
[ 0.764949] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.764982] pnp 00:04: [mem 0xff000000-0xffffffff]
[ 0.765058] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.765295] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.765445] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.765455] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.765493] pnp 00:06: [io 0x00f0]
[ 0.765509] pnp 00:06: [irq 13]
[ 0.765584] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.765620] pnp 00:07: [io 0x002e-0x002f]
[ 0.765626] pnp 00:07: [io 0x004e-0x004f]
[ 0.765632] pnp 00:07: [io 0x0061]
[ 0.765637] pnp 00:07: [io 0x0063]
[ 0.765643] pnp 00:07: [io 0x0065]
[ 0.765648] pnp 00:07: [io 0x0067]
[ 0.765653] pnp 00:07: [io 0x0070]
[ 0.765659] pnp 00:07: [io 0x0080]
[ 0.765664] pnp 00:07: [io 0x0092]
[ 0.765669] pnp 00:07: [io 0x00b2-0x00b3]
[ 0.765675] pnp 00:07: [io 0x0680-0x069f]
[ 0.765681] pnp 00:07: [io 0x1000-0x1003]
[ 0.765687] pnp 00:07: [io 0x1010-0x101f]
[ 0.765692] pnp 00:07: [io 0x1004-0x1007]
[ 0.765698] pnp 00:07: [io 0x0400-0x047f]
[ 0.765704] pnp 00:07: [io 0x0500-0x057f]
[ 0.765709] pnp 00:07: [io 0x0600-0x061f]
[ 0.765848] system 00:07: [io 0x0680-0x069f] has been reserved
[ 0.765857] system 00:07: [io 0x1000-0x1003] has been reserved
[ 0.765866] system 00:07: [io 0x1010-0x101f] has been reserved
[ 0.765873] system 00:07: [io 0x1004-0x1007] has been reserved
[ 0.765881] system 00:07: [io 0x0400-0x047f] has been reserved
[ 0.765888] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.765896] system 00:07: [io 0x0600-0x061f] has been reserved
[ 0.765904] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.765996] pnp 00:08: [io 0x06a0-0x06af]
[ 0.766002] pnp 00:08: [io 0x06b0-0x06ff]
[ 0.766122] system 00:08: [io 0x06a0-0x06af] has been reserved
[ 0.766130] system 00:08: [io 0x06b0-0x06ff] has been reserved
[ 0.766138] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.766169] pnp 00:09: [io 0x0070-0x0077]
[ 0.766184] pnp 00:09: [irq 8]
[ 0.766270] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.766651] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.766658] pnp 00:0a: [mem 0x00000000-0x00003fff]
[ 0.766664] pnp 00:0a: [mem 0x00000000-0x00000fff]
[ 0.766673] pnp 00:0a: [mem 0x00000000-0x00000fff]
[ 0.766680] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.766686] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.766844] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.766853] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[ 0.766861] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.766869] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.766877] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.766886] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.767349] pnp: PnP ACPI: found 11 devices
[ 0.767354] ACPI: ACPI bus type pnp unregistered
[ 0.780804] PCI: max bus depth: 1 pci_try_num: 2
[ 0.780882] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.780892] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.780904] pci 0000:00:1c.0: bridge window [mem 0x45000000-0x45ffffff]
[ 0.780915] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x40ffffff 64bit pref]
[ 0.780931] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.780939] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.780951] pci 0000:00:1c.1: bridge window [mem 0x44000000-0x44ffffff]
[ 0.780962] pci 0000:00:1c.1: bridge window [mem 0x41000000-0x41ffffff 64bit pref]
[ 0.780977] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.780985] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.780997] pci 0000:00:1c.2: bridge window [mem 0x43000000-0x43ffffff]
[ 0.781007] pci 0000:00:1c.2: bridge window [mem 0x42000000-0x42ffffff 64bit pref]
[ 0.781022] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.781087] pci 0000:00:1c.0: setting latency timer to 64
[ 0.781119] pci 0000:00:1c.1: setting latency timer to 64
[ 0.781146] pci 0000:00:1c.2: setting latency timer to 64
[ 0.781161] pci 0000:00:1e.0: setting latency timer to 64
[ 0.781170] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.781177] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.781183] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.781190] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.781197] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff]
[ 0.781203] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff]
[ 0.781210] pci_bus 0000:00: resource 10 [mem 0x3f800000-0x3fffffff]
[ 0.781216] pci_bus 0000:00: resource 11 [mem 0x40000000-0xfebfffff]
[ 0.781223] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.781230] pci_bus 0000:01: resource 1 [mem 0x45000000-0x45ffffff]
[ 0.781237] pci_bus 0000:01: resource 2 [mem 0x40000000-0x40ffffff 64bit pref]
[ 0.781244] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.781250] pci_bus 0000:02: resource 1 [mem 0x44000000-0x44ffffff]
[ 0.781257] pci_bus 0000:02: resource 2 [mem 0x41000000-0x41ffffff 64bit pref]
[ 0.781264] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.781270] pci_bus 0000:03: resource 1 [mem 0x43000000-0x43ffffff]
[ 0.781277] pci_bus 0000:03: resource 2 [mem 0x42000000-0x42ffffff 64bit pref]
[ 0.781284] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.781290] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.781296] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.781303] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.781309] pci_bus 0000:04: resource 8 [mem 0x000e0000-0x000effff]
[ 0.781316] pci_bus 0000:04: resource 9 [mem 0x000f0000-0x000fffff]
[ 0.781322] pci_bus 0000:04: resource 10 [mem 0x3f800000-0x3fffffff]
[ 0.781329] pci_bus 0000:04: resource 11 [mem 0x40000000-0xfebfffff]
[ 0.781592] NET: Registered protocol family 2
[ 0.781851] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.783054] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.784887] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.785728] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.785735] TCP reno registered
[ 0.785765] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.785790] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.786167] NET: Registered protocol family 1
[ 0.786209] pci 0000:00:02.0: Boot video device
[ 2.384819] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.384993] PCI: CLS 64 bytes, default 64
[ 2.385148] Unpacking initramfs...
[ 3.066591] Freeing initrd memory: 13596k freed
[ 3.079728] Simple Boot Flag at 0x44 set to 0x1
[ 3.081259] audit: initializing netlink socket (disabled)
[ 3.081294] type=2000 audit(1375301156.900:1): initialized
[ 3.111942] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.113288] VFS: Disk quotas dquot_6.5.2
[ 3.113387] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.113585] msgmni has been set to 1978
[ 3.114133] alg: No test for stdrng (krng)
[ 3.114241] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.114249] io scheduler noop registered
[ 3.114254] io scheduler deadline registered
[ 3.114327] io scheduler cfq registered (default)
[ 3.114560] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.114659] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 3.114818] pcieport 0000:00:1c.1: setting latency timer to 64
[ 3.114904] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 3.115053] pcieport 0000:00:1c.2: setting latency timer to 64
[ 3.115137] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 3.115358] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.115418] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.115423] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.116310] intel_idle: does not run on family 6 model 54
[ 3.116372] ERST: Table is not found!
[ 3.116377] GHES: HEST is not enabled!
[ 3.116566] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.233260] Linux agpgart interface v0.103
[ 3.233626] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.239864] i8042: Detected active multiplexing controller, rev 1.1
[ 3.242946] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.242965] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.243055] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.243136] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.243209] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.243617] mousedev: PS/2 mouse device common for all mice
[ 3.243735] rtc_cmos 00:09: RTC can wake from S4
[ 3.244025] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 3.244076] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.244100] cpuidle: using governor ladder
[ 3.244105] cpuidle: using governor menu
[ 3.244648] TCP cubic registered
[ 3.244867] NET: Registered protocol family 10
[ 3.246125] Mobile IPv6
[ 3.246132] NET: Registered protocol family 17
[ 3.246144] Registering the dns_resolver key type
[ 3.246590] PM: Hibernation image not present or could not be loaded.
[ 3.246633] registered taskstats version 1
[ 3.247564] rtc_cmos 00:09: setting system clock to 2013-07-31 20:05:57 UTC (1375301157)
[ 3.247727] Initializing network drop monitor service
[ 3.251393] Freeing unused kernel memory: 576k freed
[ 3.251661] Write protecting the kernel read-only data: 6144k
[ 3.260342] Freeing unused kernel memory: 652k freed
[ 3.269794] Freeing unused kernel memory: 692k freed
[ 3.273261] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.303435] udevd[58]: starting version 175
[ 3.366395] usbcore: registered new interface driver usbfs
[ 3.366491] usbcore: registered new interface driver hub
[ 3.376140] usbcore: registered new device driver usb
[ 3.377991] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.378141] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.378155] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.379087] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.379187] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 3.379219] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.383134] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 3.383206] ehci_hcd 0000:00:1d.7: irq 17, io mem 0x46105000
[ 3.384542] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.384643] r8169 0000:01:00.0: setting latency timer to 64
[ 3.384767] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[ 3.386060] r8169 0000:01:00.0: eth0: RTL8105e at 0xffffc900001fc000, 04:7d:7b:c5:4b:cf, XID 00a00000 IRQ 43
[ 3.388974] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.388985] ACPI: Thermal Zone [THRM] (50 C)
[ 3.407898] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.408003] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.408014] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.408022] usb usb1: Product: EHCI Host Controller
[ 3.408029] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 3.408037] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.409196] hub 1-0:1.0: USB hub found
[ 3.409216] hub 1-0:1.0: 8 ports detected
[ 3.410776] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.410938] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.410950] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.411001] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.411081] uhci_hcd 0000:00:1d.0: irq 17, io base 0x000050a0
[ 3.411224] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.411234] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.411243] usb usb2: Product: UHCI Host Controller
[ 3.411250] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 3.411258] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.412046] hub 2-0:1.0: USB hub found
[ 3.412069] hub 2-0:1.0: 2 ports detected
[ 3.412381] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.412394] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.412434] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.412537] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
[ 3.412671] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.412681] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.412689] usb usb3: Product: UHCI Host Controller
[ 3.412697] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 3.412704] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.413227] hub 3-0:1.0: USB hub found
[ 3.413253] hub 3-0:1.0: 2 ports detected
[ 3.413565] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.413577] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.413610] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.413716] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
[ 3.413857] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.413867] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.413875] usb usb4: Product: UHCI Host Controller
[ 3.413882] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 3.413890] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.414380] hub 4-0:1.0: USB hub found
[ 3.414402] hub 4-0:1.0: 2 ports detected
[ 3.414733] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.414746] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.414782] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.414898] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005040
[ 3.415043] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.415054] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.415063] usb usb5: Product: UHCI Host Controller
[ 3.415070] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 3.415077] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.415599] hub 5-0:1.0: USB hub found
[ 3.416142] hub 5-0:1.0: 2 ports detected
[ 3.445675] SCSI subsystem initialized
[ 3.457975] libata version 3.00 loaded.
[ 3.461126] ahci 0000:00:1f.2: version 3.0
[ 3.461695] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 3.461808] ahci: SSS flag set, parallel bus scan disabled
[ 3.461880] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 3.461893] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
[ 3.461909] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.463805] scsi0 : ahci
[ 3.464257] scsi1 : ahci
[ 3.464605] scsi2 : ahci
[ 3.464902] scsi3 : ahci
[ 3.465066] ata1: SATA max UDMA/133 abar m1024@0x46104000 port 0x46104100 irq 44
[ 3.465076] ata2: SATA max UDMA/133 abar m1024@0x46104000 port 0x46104180 irq 44
[ 3.465081] ata3: DUMMY
[ 3.465086] ata4: DUMMY
[ 3.719574] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[ 3.783534] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.835582] ata1.00: ATA-8: TOSHIBA MK3259GSXP, GN003J, max UDMA/100
[ 3.835640] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.836592] ata1.00: configured for UDMA/100
[ 3.836879] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3259GS GN00 PQ: 0 ANSI: 5
[ 3.986911] usb 1-3: New USB device found, idVendor=04f2, idProduct=b367
[ 3.986925] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 3.986931] usb 1-3: Product: WebCam
[ 3.986936] usb 1-3: Manufacturer: Chicony Electronics Co.,Ltd.
[ 4.075246] Refined TSC clocksource calibration: 1596.001 MHz.
[ 4.075258] Switching to clocksource tsc
[ 4.155170] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.165822] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.165831] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.166036] sd 0:0:0:0: [sda] Write Protect is off
[ 4.166044] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.166129] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.281126] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 4.282488] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.287103] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.621625] PM: Starting manual resume from disk
[ 5.621634] PM: Hibernation image partition 8:6 present
[ 5.621639] PM: Looking for hibernation image.
[ 5.650146] PM: Image not found (code -22)
[ 5.650151] PM: Hibernation image not present or could not be loaded.
[ 5.714527] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.853513] udevd[336]: starting version 175
[ 8.549248] ACPI: Requesting acpi_cpufreq
[ 8.563370] Monitor-Mwait will be used to enter C-1 state
[ 8.567024] Monitor-Mwait will be used to enter C-2 state
[ 8.567054] ACPI: acpi_idle registered with cpuidle
[ 8.582084] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 8.582104] ACPI: Power Button [PWRB]
[ 8.582325] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 8.582340] ACPI: Sleep Button [SLPB]
[ 8.582580] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 8.582725] ACPI: Lid Switch [LID]
[ 8.585190] wmi: Mapper loaded
[ 8.585265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 8.585282] ACPI: Power Button [PWRF]
[ 8.675566] ACPI: Battery Slot [BAT1] (battery present)
[ 8.746986] ACPI: AC Adapter [ACAD] (on-line)
[ 8.820841] coretemp coretemp.0: Unable to read TjMax from CPU 0
[ 8.820862] coretemp coretemp.0: Using relative temperature scale!
[ 8.820906] coretemp coretemp.0: Unable to read TjMax from CPU 2
[ 8.820924] coretemp coretemp.0: Using relative temperature scale!
[ 8.842566] iTCO_vendor_support: vendor-support=0
[ 9.005075] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 9.068060] [drm] Initialized drm 1.1.0 20060810
[ 9.075884] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.078944] Initializing Realtek PCIE storage driver...
[ 9.079167] Resource length: 0x1000
[ 9.079213] Original address: 0x43001000, remapped address: 0xffffc90010526000
[ 9.079227] pci->irq = 18
[ 9.079234] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[ 9.079271] rts_pstor 0000:03:00.0: setting latency timer to 64
[ 9.136310] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 9.136344] acer_wmi: Function bitmap for Communication Button: 0x1
[ 9.136575] acer_wmi: Brightness must be controlled by generic video driver
[ 9.138043] input: Acer WMI hotkeys as /devices/virtual/input/input6
[ 9.143693] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 9.144035] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
[ 9.144463] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.282647] scsi4 : SCSI emulation for PCI-Express Mass Storage devices
[ 9.282952] rts_pstor: waiting for device to settle before scanning
[ 9.500077] gma500 0000:00:02.0: setting latency timer to 64
[ 9.500150] gma500 0000:00:02.0: irq 45 for MSI/MSI-X
[ 9.500357] ioremap error for 0x3f676000-0x3f679000, requested 0x10, got 0x0
[ 9.500567] gma500 0000:00:02.0: GPU: power management timed out.
[ 9.500676] Stolen memory information
[ 9.500680] base in RAM: 0x3f800000
[ 9.500685] size: 7932K, calculated by (GTT RAM base) - (Stolen base), seems wrong
[ 9.500690] the correct size should be: 8M(dvmt mode=3)
[ 9.502598] Set up 1983 stolen pages starting at 0x3f800000, GTT offset 0K
[ 9.502790] [drm] SGX core id = 0x00000000
[ 9.502795] [drm] SGX core rev major = 0x00, minor = 0x00
[ 9.502800] [drm] SGX core rev maintenance = 0x00, designer = 0x00
[ 9.513679] cfg80211: Calling CRDA to update world regulatory domain
[ 9.526156] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.526164] [drm] No driver support for vblank timestamp query.
[ 9.949824] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 10
[ 9.949865] brcmsmac 0000:02:00.0: setting latency timer to 64
[ 10.062146] gma500 0000:00:02.0: allocated 1024x600 fb
[ 10.062350] fbcon: psbfb (fb0) is primary device
[ 10.123065] Linux media interface: v0.10
[ 10.157941] Linux video capture interface: v2.00
[ 10.166606] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 10.210973] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 10.255588] brcmsmac 0000:02:00.0: firmware: agent loaded brcm/bcm43xx-0.fw into memory
[ 10.281606] rts_pstor: device scan complete
[ 10.281938] scsi 4:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 10.282090] Bad LUN (0:1)
[ 10.282318] Bad target number (1:0)
[ 10.282527] Bad target number (2:0)
[ 10.282734] Bad target number (3:0)
[ 10.282939] Bad target number (4:0)
[ 10.283142] Bad target number (5:0)
[ 10.283345] Bad target number (6:0)
[ 10.283543] Bad target number (7:0)
[ 10.285746] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 10.285955] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 10.389068] Console: switching to colour frame buffer device 128x37
[ 10.396940] fb0: psbfb frame buffer device
[ 10.396945] drm: registered panic notifier
[ 10.397061] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0
[ 10.397354] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 10.397421] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 10.410712] cfg80211: World regulatory domain updated:
[ 10.410720] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.410729] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.410736] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.410743] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.410750] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.410756] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.440014] uvcvideo: Found UVC 1.00 device WebCam (04f2:b367)
[ 10.451581] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input8
[ 10.451835] usbcore: registered new interface driver uvcvideo
[ 10.451842] USB Video Class driver (1.1.1)
[ 10.462974] brcmsmac 0000:02:00.0: firmware: agent loaded brcm/bcm43xx_hdr-0.fw into memory
[ 10.500541] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.502459] cfg80211: Calling CRDA for country: XV
[ 10.609592] hda_codec: ALC269: SKU not ready 0x598301f0
[ 10.611709] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 10.612559] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 10.615206] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.615917] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.616224] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.200424] Adding 1295356k swap on /dev/sda6. Priority:-1 extents:1 across:1295356k
[ 14.245943] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 14.513121] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 14.704220] loop: module loaded
[ 16.872960] fuse init (API version 7.17)
[ 19.082196] RPC: Registered named UNIX socket transport module.
[ 19.082203] RPC: Registered udp transport module.
[ 19.082208] RPC: Registered tcp transport module.
[ 19.082212] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.146402] FS-Cache: Loaded
[ 19.208421] FS-Cache: Netfs 'nfs' registered for caching
[ 19.230316] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 22.307233] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 24.484798] Bluetooth: Core ver 2.16
[ 24.484866] NET: Registered protocol family 31
[ 24.484872] Bluetooth: HCI device and connection manager initialized
[ 24.484880] Bluetooth: HCI socket layer initialized
[ 24.484885] Bluetooth: L2CAP socket layer initialized
[ 24.484900] Bluetooth: SCO socket layer initialized
[ 24.534993] Bluetooth: RFCOMM TTY layer initialized
[ 24.535015] Bluetooth: RFCOMM socket layer initialized
[ 24.535022] Bluetooth: RFCOMM ver 1.11
[ 24.598446] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.598458] Bluetooth: BNEP filters: protocol multicast
[ 24.686445] lp: driver loaded but no devices found
[ 24.721822] ppdev: user-space parallel port driver
[ 26.780167] r8169 0000:01:00.0: firmware: agent loaded rtl_nic/rtl8105e-1.fw into memory
[ 26.968565] r8169 0000:01:00.0: eth0: link down
[ 26.969149] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.034558] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[ 27.037157] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 27.041136] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 27.044567] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 29.165683] wlan0: authenticate with 34:e0:cf:de:fa:32 (try 1)
[ 29.167875] wlan0: authenticated
[ 29.172589] wlan0: associate with 34:e0:cf:de:fa:32 (try 1)
[ 29.178176] wlan0: RX AssocResp from 34:e0:cf:de:fa:32 (capab=0x411 status=0 aid=3)
[ 29.178197] wlan0: associated
[ 29.178218] wlan0: No basic rates in AssocResp. Using min supported rate instead.
[ 29.178825] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 29.178864] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 29.178889] ieee80211 phy0: changing basic rates failed: -22
[ 29.178908] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 29.180079] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 30.677351] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 40.432931] wlan0: no IPv6 routers present
[ 1177.823280] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1177.823319] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: disassociated
[ 1177.823345] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
[ 1177.823368] wlan0: deauthenticating from 34:e0:cf:de:fa:32 by local choice (reason=3)
[ 1177.986134] cfg80211: Calling CRDA for country: RU
[ 1178.022952] cfg80211: Regulatory domain changed to country: RU
[ 1178.022963] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1178.022973] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1178.022981] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[ 1178.023035] cfg80211: Calling CRDA to update world regulatory domain
[ 1178.040869] cfg80211: World regulatory domain updated:
[ 1178.040878] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1178.040887] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1178.040894] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1178.040901] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1178.040907] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1178.040914] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1180.719047] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 1180.719058] PM: Marking nosave pages: 000000003f4af000 - 000000003f6ef000
[ 1180.719085] PM: Basic memory bitmaps created
[ 1180.719088] PM: Syncing filesystems ... done.
[ 1180.913465] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1180.927292] PM: Preallocating image memory... done (allocated 141275 pages)
[ 1181.432670] PM: Allocated 565100 kbytes in 0.50 seconds (1130.20 MB/s)
[ 1181.432676] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1181.446859] Suspending console(s) (use no_console_suspend to debug)
[ 1181.447142] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1181.447500] Ready to suspend
[ 1182.461667] PM: freeze of devices complete after 1015.740 msecs
[ 1182.462289] PM: late freeze of devices complete after 0.613 msecs
[ 1182.462330] ACPI: Preparing to enter system sleep state S4
[ 1182.463170] PM: Saving platform NVS memory
[ 1182.470815] Disabling non-boot CPUs ...
[ 1182.573429] CPU 1 is now offline
[ 1182.677323] CPU 2 is now offline
[ 1182.781240] CPU 3 is now offline
[ 1182.782443] Extended CMOS year: 2000
[ 1182.782556] PM: Creating hibernation image:
[ 1182.839259] PM: Need to copy 95279 pages
[ 1182.839265] PM: Normal pages needed: 95279 + 1024, available pages: 163836
[ 1182.782617] PM: Restoring platform NVS memory
[ 1182.783722] CPU0: Thermal monitoring handled by SMI
[ 1182.783813] Extended CMOS year: 2000
[ 1182.783907] Enabling non-boot CPUs ...
[ 1182.784416] Booting Node 0 Processor 1 APIC 0x1
[ 1182.784422] smpboot cpu 1: start_ip = 99000
[ 1182.795360] Calibrating delay loop (skipped) already calibrated this CPU
[ 1182.795391] CPU1: Thermal monitoring handled by SMI
[ 1182.816192] NMI watchdog enabled, takes one hw-pmu counter.
[ 1182.816789] CPU1 is up
[ 1182.817247] Booting Node 0 Processor 2 APIC 0x2
[ 1182.817253] smpboot cpu 2: start_ip = 99000
[ 1182.828190] Calibrating delay loop (skipped) already calibrated this CPU
[ 1182.828217] CPU2: Thermal monitoring handled by SMI
[ 1182.849562] NMI watchdog enabled, takes one hw-pmu counter.
[ 1182.850136] CPU2 is up
[ 1182.850656] Booting Node 0 Processor 3 APIC 0x3
[ 1182.850661] smpboot cpu 3: start_ip = 99000
[ 1182.861600] Calibrating delay loop (skipped) already calibrated this CPU
[ 1182.861625] CPU3: Thermal monitoring handled by SMI
[ 1182.883200] NMI watchdog enabled, takes one hw-pmu counter.
[ 1182.883864] CPU3 is up
[ 1182.885490] ACPI: Waking up from system sleep state S4
[ 1182.889395] PM: early restore of devices complete after 1.330 msecs
[ 1182.960281] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 1182.960324] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1182.960377] usb usb2: root hub lost power or was reset
[ 1182.960418] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1182.960434] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 1182.960475] usb usb3: root hub lost power or was reset
[ 1182.960500] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1182.960543] usb usb4: root hub lost power or was reset
[ 1182.960555] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1182.960578] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1182.960601] usb usb5: root hub lost power or was reset
[ 1182.960644] pci 0000:00:1e.0: setting latency timer to 64
[ 1182.960733] Ready to resume
[ 1182.960953] ahci 0000:00:1f.2: setting latency timer to 64
[ 1182.960970] usb usb1: root hub lost power or was reset
[ 1182.960988] brcmsmac 0000:02:00.0: setting latency timer to 64
[ 1182.961003] rts_pstor 0000:03:00.0: setting latency timer to 64
[ 1182.961017] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[ 1182.962309] sd 0:0:0:0: [sda] Starting disk
[ 1182.964887] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1182.969397] Extended CMOS year: 2000
[ 1183.278180] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1183.278239] ata2: SATA link down (SStatus 0 SControl 300)
[ 1183.310151] usb 1-3: reset high-speed USB device number 2 using ehci_hcd
[ 1183.331745] ata1.00: configured for UDMA/100
[ 1183.549848] PM: restore of devices complete after 590.274 msecs
[ 1183.550096] PM: Image restored successfully.
[ 1183.550101] Restarting tasks ... done.
[ 1183.554194] PM: Basic memory bitmaps freed
[ 1185.926546] r8169 0000:01:00.0: eth0: link down
[ 1185.927203] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1185.985101] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[ 1185.985116] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 1185.988504] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 1185.989306] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1187.856124] wlan0: authenticate with 34:e0:cf:de:fa:32 (try 1)
[ 1187.858191] wlan0: authenticated
[ 1187.859092] wlan0: associate with 34:e0:cf:de:fa:32 (try 1)
[ 1187.866724] wlan0: RX AssocResp from 34:e0:cf:de:fa:32 (capab=0x411 status=0 aid=3)
[ 1187.866746] wlan0: associated
[ 1187.866768] wlan0: No basic rates in AssocResp. Using min supported rate instead.
[ 1187.867390] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 1187.867430] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 1187.867455] ieee80211 phy0: changing basic rates failed: -22
[ 1187.867474] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 1187.868896] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1187.869353] cfg80211: Calling CRDA for country: RU
[ 1188.240420] cfg80211: Regulatory domain changed to country: RU
[ 1188.240429] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1188.240437] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 1188.240443] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
[ 1188.363054] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 1198.028229] wlan0: no IPv6 routers present
[ 1205.522272] SysRq : SAK
[ 1214.694148] SysRq : SAK
[ 1218.853852] SysRq : SAK
[ 1218.853962] SAK: killed process 3007 (Xorg): task_session(p)==tty->session
[ 1218.854296] SAK: killed process 3007 (Xorg): task_session(p)==tty->session
[ 1218.854318] SAK: killed process 3028 (Xorg): task_session(p)==tty->session
[ 1218.854335] SAK: killed process 3029 (Xorg): task_session(p)==tty->session
[ 1218.854351] SAK: killed process 3030 (Xorg): task_session(p)==tty->session
[ 1218.854367] SAK: killed process 3031 (Xorg): task_session(p)==tty->session
[ 1218.854432] SAK: killed process 3071 (console-kit-dae): fd#10 opened to the tty
[ 1218.854825] SAK: killed process 3076 (console-kit-dae): fd#10 opened to the tty
[ 1218.854852] SAK: killed process 3078 (console-kit-dae): fd#10 opened to the tty
[ 1218.854876] SAK: killed process 3079 (console-kit-dae): fd#10 opened to the tty
[ 1218.854897] SAK: killed process 3080 (console-kit-dae): fd#10 opened to the tty
[ 1218.854917] SAK: killed process 3081 (console-kit-dae): fd#10 opened to the tty
[ 1218.854938] SAK: killed process 3082 (console-kit-dae): fd#10 opened to the tty
[ 1218.854958] SAK: killed process 3084 (console-kit-dae): fd#10 opened to the tty
[ 1218.854978] SAK: killed process 3085 (console-kit-dae): fd#10 opened to the tty
[ 1218.854997] SAK: killed process 3086 (console-kit-dae): fd#10 opened to the tty
[ 1218.855016] SAK: killed process 3087 (console-kit-dae): fd#10 opened to the tty
[ 1218.855036] SAK: killed process 3088 (console-kit-dae): fd#10 opened to the tty
[ 1218.855055] SAK: killed process 3089 (console-kit-dae): fd#10 opened to the tty
[ 1218.855075] SAK: killed process 3090 (console-kit-dae): fd#10 opened to the tty
[ 1218.855094] SAK: killed process 3091 (console-kit-dae): fd#10 opened to the tty
[ 1218.855114] SAK: killed process 3092 (console-kit-dae): fd#10 opened to the tty
[ 1218.855133] SAK: killed process 3093 (console-kit-dae): fd#10 opened to the tty
[ 1218.855153] SAK: killed process 3094 (console-kit-dae): fd#10 opened to the tty
[ 1218.855172] SAK: killed process 3095 (console-kit-dae): fd#10 opened to the tty
[ 1218.855190] SAK: killed process 3096 (console-kit-dae): fd#10 opened to the tty
[ 1218.855209] SAK: killed process 3097 (console-kit-dae): fd#10 opened to the tty
[ 1218.855229] SAK: killed process 3098 (console-kit-dae): fd#10 opened to the tty
[ 1218.855248] SAK: killed process 3099 (console-kit-dae): fd#10 opened to the tty
[ 1218.855266] SAK: killed process 3100 (console-kit-dae): fd#10 opened to the tty
[ 1218.855286] SAK: killed process 3101 (console-kit-dae): fd#10 opened to the tty
[ 1218.855305] SAK: killed process 3102 (console-kit-dae): fd#10 opened to the tty
[ 1218.855323] SAK: killed process 3103 (console-kit-dae): fd#10 opened to the tty
[ 1218.855341] SAK: killed process 3104 (console-kit-dae): fd#10 opened to the tty
[ 1218.855361] SAK: killed process 3105 (console-kit-dae): fd#10 opened to the tty
[ 1218.855382] SAK: killed process 3106 (console-kit-dae): fd#10 opened to the tty
[ 1218.855401] SAK: killed process 3107 (console-kit-dae): fd#10 opened to the tty
[ 1218.855420] SAK: killed process 3108 (console-kit-dae): fd#10 opened to the tty
[ 1218.855440] SAK: killed process 3109 (console-kit-dae): fd#10 opened to the tty
[ 1218.855460] SAK: killed process 3110 (console-kit-dae): fd#10 opened to the tty
[ 1218.855479] SAK: killed process 3111 (console-kit-dae): fd#10 opened to the tty
[ 1218.855498] SAK: killed process 3112 (console-kit-dae): fd#10 opened to the tty
[ 1218.855517] SAK: killed process 3113 (console-kit-dae): fd#10 opened to the tty
[ 1218.855537] SAK: killed process 3114 (console-kit-dae): fd#10 opened to the tty
[ 1218.855555] SAK: killed process 3115 (console-kit-dae): fd#10 opened to the tty
[ 1218.855574] SAK: killed process 3116 (console-kit-dae): fd#10 opened to the tty
[ 1218.855592] SAK: killed process 3117 (console-kit-dae): fd#10 opened to the tty
[ 1218.855611] SAK: killed process 3118 (console-kit-dae): fd#10 opened to the tty
[ 1218.855629] SAK: killed process 3119 (console-kit-dae): fd#10 opened to the tty
[ 1218.855649] SAK: killed process 3120 (console-kit-dae): fd#10 opened to the tty
[ 1218.855668] SAK: killed process 3121 (console-kit-dae): fd#10 opened to the tty
[ 1218.855686] SAK: killed process 3122 (console-kit-dae): fd#10 opened to the tty
[ 1218.855704] SAK: killed process 3123 (console-kit-dae): fd#10 opened to the tty
[ 1218.855723] SAK: killed process 3124 (console-kit-dae): fd#10 opened to the tty
[ 1218.855742] SAK: killed process 3125 (console-kit-dae): fd#10 opened to the tty
[ 1218.855761] SAK: killed process 3126 (console-kit-dae): fd#10 opened to the tty
[ 1218.855780] SAK: killed process 3127 (console-kit-dae): fd#10 opened to the tty
[ 1218.855798] SAK: killed process 3128 (console-kit-dae): fd#10 opened to the tty
[ 1218.855818] SAK: killed process 3129 (console-kit-dae): fd#10 opened to the tty
[ 1218.855836] SAK: killed process 3130 (console-kit-dae): fd#10 opened to the tty
[ 1218.855855] SAK: killed process 3131 (console-kit-dae): fd#10 opened to the tty
[ 1218.855889] SAK: killed process 3132 (console-kit-dae): fd#10 opened to the tty
[ 1218.855908] SAK: killed process 3133 (console-kit-dae): fd#10 opened to the tty
[ 1218.855928] SAK: killed process 3134 (console-kit-dae): fd#10 opened to the tty
[ 1218.855948] SAK: killed process 3135 (console-kit-dae): fd#10 opened to the tty
[ 1218.855966] SAK: killed process 3136 (console-kit-dae): fd#10 opened to the tty
[ 1218.855985] SAK: killed process 3137 (console-kit-dae): fd#10 opened to the tty
[ 1218.856004] SAK: killed process 3139 (gmain): fd#10 opened to the tty
[ 1218.856022] SAK: killed process 3140 (gdbus): fd#10 opened to the tty
[ 1218.856039] SAK: killed process 4636 (console-kit-dae): fd#10 opened to the tty
[ 1218.856058] SAK: killed process 4637 (console-kit-dae): fd#10 opened to the tty
Reply to: