Package: xserver-xorg
Version: 1:7.7+3
Severity: normal
The following trace with EQ overflowing is filling my Xorg.*.log
mostly when two X servers are running. The display is stuck for 10
seconds and I need to switch to TTY and back. Doing so is logged with:
[ 10657.667] (II) Open ACPI successful (/var/run/acpid.socket)
[ 10657.667] (--) SAVAGE(0): Chose mode 117 at 60Hz.
Seen so far with flwm and awesome --noargb. I assume this is because
the hardware accelaration of my card is not used, as dri1 support has
been dropped by mesa some time ago. Another option is both instances of
X are trying to grab the mouse (evdev). I did not find out yet, why
udev is unloading the driver occasionally.
This worked fine before upgrading to jessi by installing dri1
from mesa 7.9.2 repository [1], usually I only use one X though.
Freezes can't be triggered and happened when two X sesssion were
active so far, similar to "machine becomes totally blocked not
responding to keyboard input (even caps lock on /off) pressing the
power button to signify shutdown unless held in for the four second
hard power down)" in #651318.
As this is widely reported, I did not get into this via gdb. Please
tell me, if any you miss any info.
X: https://bugs.freedesktop.org/buglist.cgi?quicksearch=EQ+overflow
fedora: http://marc.info/?l=fedora-devel-list&m=124101535025331&w=2
redhat: https://bugzilla.redhat.com/show_bug.cgi?id=465884#c64
gentoo: https://bugs.gentoo.org/263057?id=263057
Thanks,
Kardan
1] git://anongit.freedesktop.org/git/mesa/mesa
[ 113.732] (WW) Falling back to old probe method for vesa
[ 113.732] (WW) Falling back to old probe method for fbdev
[ 114.769] (EE) [drm] Could not set DRM device bus ID.
[ 114.770] (EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI.
[ 114.770] (EE) SAVAGE(0): DRI isn't enabled
[ 115.606] (WW) SAVAGE(0): Direct rendering disabled
[mi] These backtraces from mieqEnqueue may point to a culprit higher up
the stack. [mi] mieq is *NOT* the cause. It is a victim.
[mi] EQ overflow continuing. 100 events have been dropped.
[mi] EQ overflow continuing. 200 events have been dropped.
[mi] EQ overflow continuing. 300 events have been dropped.
[mi] EQ overflow continuing. 400 events have been dropped.
[mi] EQ processing has resumed after 475 dropped events.
[mi] This may be caused my a misbehaving driver monopolizing the
server's resources. [mi] EQ overflowing. Additional events will be
discarded until existing events are processed.
[mi] These backtraces from mieqEnqueue may point to a culprit higher up
the stack. [mi] mieq is *NOT* the cause. It is a victim.
[mi] EQ overflow continuing. 100 events have been dropped.
[mi] EQ overflow continuing. 200 events have been dropped.
[mi] Increasing EQ size to 512 to prevent dropped events.
[mi] EQ processing has resumed after 293 dropped events.
[mi] This may be caused my a misbehaving driver monopolizing the
server's resources.
[mi] Increasing EQ size to 1024 to prevent dropped events.
[mi] EQ processing has resumed after 43 dropped events.
[mi] This may be caused my a misbehaving driver monopolizing the
server's resources.
source: http://lists.freedesktop.org/archives/xorg-devel/2012-April/030331.html
Backtrace:
0: X (xorg_backtrace+0x49) [0xb76d4769]
1: X (mieqEnqueue+0x22b) [0xb76b305b]
2: X (0xb7557000+0x51405) [0xb75a8405]
3: X (xf86PostMotionEventM+0x24b) [0xb75e256b]
4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x35ad)
[0xb6cc15ad] 5: /usr/lib/xorg/modules/input/evdev_drv.so
(0xb6cbe000+0x4a2c) [0xb6cc2a2c] 6: X (0xb7557000+0x7ac01) [0xb75d1c01]
7: X (0xb7557000+0xa094a) [0xb75f794a]
8: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb7535400]
9: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0xa119)
[0xb6f11119] 10: /usr/lib/xorg/modules/drivers/savage_drv.so
(0xb6f07000+0x5ac6) [0xb6f0cac6] 11: /usr/lib/xorg/modules/libxaa.so
(0xb6d04000+0xadf8) [0xb6d0edf8] 12: /usr/lib/xorg/modules/libxaa.so
(0xb6d04000+0x548d3) [0xb6d588d3] 13: X (0xb7557000+0x10929d)
[0xb766029d] 14: X (0xb7557000+0x15b60f) [0xb76b260f]
15: X (0xb7557000+0x16cd21) [0xb76c3d21]
16: X (0xb7557000+0x16d50c) [0xb76c450c]
17: X (0xb7557000+0x16d75e) [0xb76c475e]
18: X (0xb7557000+0xbe544) [0xb7615544]
19: X (miPointerUpdateSprite+0x30d) [0xb76be6ed]
20: X (mieqProcessInputEvents+0x11e) [0xb76b35ce]
21: X (ProcessInputEvents+0x14) [0xb75d1cb4]
22: X (0xb7557000+0x3c17c) [0xb759317c]
23: X (0xb7557000+0x29e95) [0xb7580e95]
24: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf5)
[0xb717d8f5] 25: X (0xb7557000+0x2a1e9) [0xb75811e9]
[ 10395.850] (II) config/udev: removing device Logitech USB Optical Mouse
[ 10395.851] (II) evdev: Logitech USB Optical Mouse: Close
[ 10395.851] (II) UnloadModule: "evdev"
[ 10398.233] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 10398.233] (II) No input driver specified, ignoring this device.
[ 10398.233] (II) This device may have been added with another device file.
[ 10398.235] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 10398.235] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 10398.244] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 10398.244] (**) Logitech USB Optical Mouse: always reports core events
[ 10398.244] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[ 10398.245] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 10398.245] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons
[ 10398.245] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 10398.245] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 10398.245] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 10398.245] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 10398.245] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 10398.245] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 10398.245] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
00:01.0 PCI bridge: Intel Corporation 82830M/MP AGP Bridge (rev 02)
(prog-if 00 [Normal decode]) Flags: bus master, 66MHz, fast devsel,
latency 96 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: e0000000-ebffffff
01:00.0 VGA compatible controller: S3 Inc. SuperSavage IX/C SDR (rev
05) (prog-if 00 [VGA controller]) Subsystem: IBM ThinkPad T23
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at c0100000 (32-bit, non-prefetchable) [size=512K]
Memory at e8000000 (32-bit, prefetchable) [size=64M]
Memory at e4000000 (32-bit, prefetchable) [size=64M]
Memory at e0000000 (32-bit, prefetchable) [size=32M]
[virtual] Expansion ROM at e2000000 [disabled] [size=64K]
$ cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 512MB, count=1: write-back
reg01: base=0x0e4000000 ( 3648MB), size= 64MB, count=1: write-combining
reg02: base=0x0e8000000 ( 3712MB), size= 64MB, count=1: write-combining
reg03: base=0x0d0000000 ( 3328MB), size= 256MB, count=1: write-combining
$ glxgears
47 frames in 5.0 seconds = 9.309 FPS
ii x11-xserver-utils 7.7~3 i386
ii xserver-common 2:1.12.4-6 all
ii xserver-xephyr 2:1.12.4-6 i386
ii xserver-xorg 1:7.7+3 i386
ii xserver-xorg-core 2:1.12.4-6 i386
ii xserver-xorg-core-dbg 2:1.12.4-6 i386
ii xserver-xorg-input-all 1:7.7+3 i386
ii xserver-xorg-input-evdev 1:2.7.0-1+b1 i386
ii xserver-xorg-input-mouse 1:1.7.2-3 i386
ii xserver-xorg-input-synaptics 1.6.2-2 i386
ii xserver-xorg-input-vmmouse 1:12.9.0-1 i386
ii xserver-xorg-input-wacom 0.15.0+20120515-2 i386
ii xserver-xorg-video-all 1:7.7+3 i386
ii xserver-xorg-video-apm 1:1.2.3-3 i386
ii xserver-xorg-video-ark 1:0.7.4-1+b1 i386
ii xserver-xorg-video-ati 1:6.14.4-8 i386
ii xserver-xorg-video-chips 1:1.2.4-2 i386
ii xserver-xorg-video-cirrus 1:1.4.0-2 i386
ii xserver-xorg-video-fbdev 1:0.4.2-4+b3 i386
ii xserver-xorg-video-geode 2.11.14-3 i386
ii xserver-xorg-video-i128 1:1.3.5-1+b1 i386
ii xserver-xorg-video-i740 1:1.3.2-4+b3 i386
ii xserver-xorg-video-intel 2:2.19.0-6 i386
ii xserver-xorg-video-mach64 6.9.1-2 i386
ii xserver-xorg-video-mga 1:1.5.0-3 i386
ii xserver-xorg-video-neomagic 1:1.2.6-1 i386
ii xserver-xorg-video-nouveau 1:1.0.1-5 i386
ii xserver-xorg-video-openchrome 1:0.2.906-2+deb7u1 i386
ii xserver-xorg-video-r128 6.8.2-1 i386
ii xserver-xorg-video-radeon 1:6.14.4-8 i386
ii xserver-xorg-video-rendition 1:4.2.4-3 i386
ii xserver-xorg-video-s3 1:0.6.3-5 i386
ii xserver-xorg-video-s3virge 1:1.10.4-5 i386
ii xserver-xorg-video-savage 1:2.3.4-1 i386
ii xserver-xorg-video-siliconmotion 1:1.7.6-1 i386
ii xserver-xorg-video-sis 1:0.10.4-1 i386
ii xserver-xorg-video-sisusb 1:0.9.4-3 i386
ii xserver-xorg-video-tdfx 1:1.4.4-1 i386
ii xserver-xorg-video-trident 1:1.3.5-1 i386
ii xserver-xorg-video-tseng 1:1.2.4-3 i386
ii xserver-xorg-video-vesa 1:2.3.1-1+b1 i386
ii xserver-xorg-video-vmware 1:12.0.2-1+b1 i386
ii xserver-xorg-video-voodoo 1:1.2.4-2+b3 i386 [ 113.665] X.Org X Server 1.12.4 Release Date: 2012-08-27 [ 113.667] X Protocol Version 11, Revision 0 [ 113.667] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian [ 113.669] Current Operating System: Linux delight 3.2.0-4-686-pae #1 SMP Debian 3.2.46-1 i686 [ 113.669] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=cce2e154-3c59-42cb-855e-d77276bd195f ro quiet [ 113.669] Build Date: 17 April 2013 11:13:16AM [ 113.671] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>) [ 113.671] Current version of pixman: 0.26.0 [ 113.671] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 113.671] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 113.672] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Jun 20 11:01:53 2013 [ 113.673] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 113.673] (==) No Layout section. Using the first Screen section. [ 113.673] (==) No screen section available. Using defaults. [ 113.673] (**) |-->Screen "Default Screen Section" (0) [ 113.674] (**) | |-->Monitor "<default monitor>" [ 113.674] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 113.674] (==) Automatically adding devices [ 113.674] (==) Automatically enabling devices [ 113.675] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 113.675] Entry deleted from font path. [ 113.675] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 113.675] Entry deleted from font path. [ 113.675] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 113.675] (==) ModulePath set to "/usr/lib/xorg/modules" [ 113.675] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 113.675] (II) Loader magic: 0xb77415a0 [ 113.675] (II) Module ABI versions: [ 113.675] X.Org ANSI C Emulation: 0.4 [ 113.675] X.Org Video Driver: 12.1 [ 113.675] X.Org XInput driver : 16.0 [ 113.675] X.Org Server Extension : 6.0 [ 113.677] (--) PCI:*(0:1:0:0) 5333:8c2e:1014:01fc rev 5, Mem @ 0xc0100000/524288, 0xe8000000/67108864, 0xe4000000/67108864, 0xe0000000/33554432, BIOS @ 0x????????/65536 [ 113.690] (II) Open ACPI successful (/var/run/acpid.socket) [ 113.691] (II) LoadModule: "extmod" [ 113.692] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 113.693] (II) Module extmod: vendor="X.Org Foundation" [ 113.693] compiled for 1.12.4, module version = 1.0.0 [ 113.693] Module class: X.Org Server Extension [ 113.693] ABI class: X.Org Server Extension, version 6.0 [ 113.694] (II) Loading extension SELinux [ 113.694] (II) Loading extension MIT-SCREEN-SAVER [ 113.694] (II) Loading extension XFree86-VidModeExtension [ 113.694] (II) Loading extension XFree86-DGA [ 113.694] (II) Loading extension DPMS [ 113.694] (II) Loading extension XVideo [ 113.694] (II) Loading extension XVideo-MotionCompensation [ 113.694] (II) Loading extension X-Resource [ 113.694] (II) LoadModule: "dbe" [ 113.695] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 113.695] (II) Module dbe: vendor="X.Org Foundation" [ 113.695] compiled for 1.12.4, module version = 1.0.0 [ 113.695] Module class: X.Org Server Extension [ 113.695] ABI class: X.Org Server Extension, version 6.0 [ 113.695] (II) Loading extension DOUBLE-BUFFER [ 113.695] (II) LoadModule: "glx" [ 113.697] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 113.697] (II) Module glx: vendor="X.Org Foundation" [ 113.697] compiled for 1.12.4, module version = 1.0.0 [ 113.697] ABI class: X.Org Server Extension, version 6.0 [ 113.697] (==) AIGLX enabled [ 113.697] (II) Loading extension GLX [ 113.697] (II) LoadModule: "record" [ 113.698] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 113.699] (II) Module record: vendor="X.Org Foundation" [ 113.699] compiled for 1.12.4, module version = 1.13.0 [ 113.699] Module class: X.Org Server Extension [ 113.699] ABI class: X.Org Server Extension, version 6.0 [ 113.699] (II) Loading extension RECORD [ 113.699] (II) LoadModule: "dri" [ 113.700] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 113.700] (II) Module dri: vendor="X.Org Foundation" [ 113.700] compiled for 1.12.4, module version = 1.0.0 [ 113.700] ABI class: X.Org Server Extension, version 6.0 [ 113.701] (II) Loading extension XFree86-DRI [ 113.701] (II) LoadModule: "dri2" [ 113.702] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 113.702] (II) Module dri2: vendor="X.Org Foundation" [ 113.702] compiled for 1.12.4, module version = 1.2.0 [ 113.702] ABI class: X.Org Server Extension, version 6.0 [ 113.702] (II) Loading extension DRI2 [ 113.702] (==) Matched savage as autoconfigured driver 0 [ 113.702] (==) Matched vesa as autoconfigured driver 1 [ 113.702] (==) Matched fbdev as autoconfigured driver 2 [ 113.702] (==) Assigned the driver to the xf86ConfigLayout [ 113.702] (II) LoadModule: "savage" [ 113.703] (II) Loading /usr/lib/xorg/modules/drivers/savage_drv.so [ 113.703] (II) Module savage: vendor="X.Org Foundation" [ 113.703] compiled for 1.12.1, module version = 2.3.4 [ 113.703] Module class: X.Org Video Driver [ 113.703] ABI class: X.Org Video Driver, version 12.0 [ 113.703] (II) LoadModule: "vesa" [ 113.704] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 113.704] (II) Module vesa: vendor="X.Org Foundation" [ 113.704] compiled for 1.12.1, module version = 2.3.1 [ 113.704] Module class: X.Org Video Driver [ 113.704] ABI class: X.Org Video Driver, version 12.0 [ 113.704] (II) LoadModule: "fbdev" [ 113.705] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 113.705] (II) Module fbdev: vendor="X.Org Foundation" [ 113.705] compiled for 1.12.1, module version = 0.4.2 [ 113.705] ABI class: X.Org Video Driver, version 12.0 [ 113.705] (II) SAVAGE: driver (version 2.3.4) for S3 Savage chipsets: Savage4, Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX, Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64, SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K [ 113.706] (II) VESA: driver for VESA chipsets: vesa [ 113.707] (II) FBDEV: driver for framebuffer: fbdev [ 113.707] (--) using VT number 8 [ 113.732] (WW) Falling back to old probe method for vesa [ 113.732] (WW) Falling back to old probe method for fbdev [ 113.732] (II) Loading sub module "fbdevhw" [ 113.732] (II) LoadModule: "fbdevhw" [ 113.732] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 113.733] (II) Module fbdevhw: vendor="X.Org Foundation" [ 113.733] compiled for 1.12.4, module version = 0.0.2 [ 113.733] ABI class: X.Org Video Driver, version 12.1 [ 113.733] (II) Loading sub module "vgahw" [ 113.733] (II) LoadModule: "vgahw" [ 113.734] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 113.734] (II) Module vgahw: vendor="X.Org Foundation" [ 113.734] compiled for 1.12.4, module version = 0.1.0 [ 113.734] ABI class: X.Org Video Driver, version 12.1 [ 113.735] (II) SAVAGE(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 16/16 [ 113.735] (==) SAVAGE(0): Depth 16, (--) framebuffer bpp 16 [ 113.735] (==) SAVAGE(0): RGB weight 565 [ 113.735] (==) SAVAGE(0): Default visual is TrueColor [ 113.735] (II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [ 113.735] (==) SAVAGE(0): Using XAA acceleration architecture [ 113.735] (==) SAVAGE(0): Using HW cursor [ 113.735] (==) SAVAGE(0): Using video BIOS to set modes [ 113.735] (II) Loading sub module "vbe" [ 113.735] (II) LoadModule: "vbe" [ 113.743] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 113.743] (II) Module vbe: vendor="X.Org Foundation" [ 113.743] compiled for 1.12.4, module version = 1.1.0 [ 113.743] ABI class: X.Org Video Driver, version 12.1 [ 113.743] (II) Loading sub module "int10" [ 113.743] (II) LoadModule: "int10" [ 113.744] (II) Loading /usr/lib/xorg/modules/libint10.so [ 113.745] (II) Module int10: vendor="X.Org Foundation" [ 113.745] compiled for 1.12.4, module version = 1.0.0 [ 113.745] ABI class: X.Org Video Driver, version 12.1 [ 113.745] (II) SAVAGE(0): initializing int10 [ 113.753] (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000 [ 113.754] (II) SAVAGE(0): VESA BIOS detected [ 113.754] (II) SAVAGE(0): VESA VBE Version 2.0 [ 113.754] (II) SAVAGE(0): VESA VBE Total Mem: 15168 kB [ 113.754] (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Paramont BIOS [ 113.754] (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0 [ 113.754] (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated. [ 113.754] (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0 [ 113.754] (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.0 [ 113.754] (--) SAVAGE(0): Chip: id 8c2e, "SuperSavage/IXC 64" [ 113.755] (--) SAVAGE(0): Engine: "SuperSavage" [ 113.755] (--) SAVAGE(0): AGP card detected [ 113.755] (==) SAVAGE(0): Using AGP DMA [ 113.755] (II) SAVAGE(0): DMA is not supported on SuperSavages. [ 113.755] (==) SAVAGE(0): DMA disabled [ 113.755] (==) SAVAGE(0): Using AGP 1x mode [ 113.755] (==) SAVAGE(0): Using 16 MB AGP aperture [ 113.779] (==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0) [ 113.779] (--) SAVAGE(0): probed videoram: 16384k [ 113.799] (II) Loading sub module "ddc" [ 113.799] (II) LoadModule: "ddc" [ 113.800] (II) Module "ddc" already built-in [ 114.721] (--) SAVAGE(0): No DDC signal [ 114.723] (II) Loading sub module "i2c" [ 114.723] (II) LoadModule: "i2c" [ 114.723] (II) Module "i2c" already built-in [ 114.723] (II) SAVAGE(0): I2C bus "I2C bus" initialized. [ 114.723] (II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0. [ 114.727] (--) SAVAGE(0): Detected current MCLK value of 286.364 MHz [ 114.727] (--) SAVAGE(0): 1024x768 TFT LCD panel detected and active [ 114.727] (--) SAVAGE(0): - Limiting video mode to 1024x768 [ 114.740] (--) SAVAGE(0): Found 13 modes at this depth: [ 114.740] [10e] 320 x 200, 70Hz [ 114.741] [111] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz [ 114.742] [114] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz [ 114.746] [117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz [ 114.747] [11a] 1280 x 1024, 60Hz, 75Hz, 85Hz [ 114.748] [11d] 640 x 400, 70Hz [ 114.748] [122] 1600 x 1200, 60Hz, 75Hz, 85Hz [ 114.749] [133] 320 x 240, 72Hz [ 114.749] [13c] 1400 x 1050, 60Hz, 75Hz [ 114.749] [143] 400 x 300, 72Hz [ 114.749] [153] 512 x 384, 70Hz [ 114.750] [173] 720 x 480, 75Hz [ 114.750] [17e] 720 x 576, 75Hz [ 114.750] (II) SAVAGE(0): <default monitor>: Using hsync range of 31.50-47.82 kHz [ 114.750] (II) SAVAGE(0): <default monitor>: Using vrefresh range of 56.00-59.92 Hz [ 114.750] (II) SAVAGE(0): <default monitor>: Using maximum pixel clock of 63.50 MHz [ 114.750] (II) SAVAGE(0): Estimated virtual size for aspect ratio 1.3333 is 1024x768 [ 114.750] (II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz [ 114.750] (--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz. [ 114.750] (II) SAVAGE(0): Not using default mode "640x350" (no mode of this name) [ 114.750] (--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz. [ 114.750] (II) SAVAGE(0): Not using default mode "320x175" (no mode of this name) [ 114.750] (--) SAVAGE(0): Chose mode 11d at 70Hz. [ 114.750] (II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range) [ 114.750] (--) SAVAGE(0): Chose mode 10e at 70Hz. [ 114.750] (II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range) [ 114.750] (--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz. [ 114.750] (II) SAVAGE(0): Not using default mode "720x400" (no mode of this name) [ 114.750] (--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz. [ 114.750] (II) SAVAGE(0): Not using default mode "360x200" (no mode of this name) [ 114.750] (--) SAVAGE(0): Chose mode 111 at 60Hz. [ 114.750] (--) SAVAGE(0): Chose mode 133 at 72Hz. [ 114.750] (--) SAVAGE(0): Chose mode 111 at 72Hz. [ 114.750] (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range) [ 114.750] (--) SAVAGE(0): Chose mode 133 at 72Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range) [ 114.751] (--) SAVAGE(0): Chose mode 111 at 75Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range) [ 114.751] (--) SAVAGE(0): Chose mode 133 at 72Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range) [ 114.751] (--) SAVAGE(0): Chose mode 111 at 85Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range) [ 114.751] (--) SAVAGE(0): Chose mode 133 at 72Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range) [ 114.751] (--) SAVAGE(0): Chose mode 114 at 60Hz. [ 114.751] (--) SAVAGE(0): Chose mode 143 at 72Hz. [ 114.751] (--) SAVAGE(0): Chose mode 114 at 60Hz. [ 114.751] (--) SAVAGE(0): Chose mode 143 at 72Hz. [ 114.751] (--) SAVAGE(0): Chose mode 114 at 72Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range) [ 114.751] (--) SAVAGE(0): Chose mode 143 at 72Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range) [ 114.751] (--) SAVAGE(0): Chose mode 114 at 75Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range) [ 114.751] (--) SAVAGE(0): Chose mode 143 at 72Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range) [ 114.751] (--) SAVAGE(0): Chose mode 114 at 85Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) [ 114.751] (--) SAVAGE(0): Chose mode 143 at 72Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "400x300" (hsync out of range) [ 114.751] (--) SAVAGE(0): Chose mode 117 at 85Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "1024x768i" (vrefresh out of range) [ 114.751] (--) SAVAGE(0): Chose mode 153 at 70Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "512x384i" (vrefresh out of range) [ 114.751] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 114.751] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) [ 114.751] (--) SAVAGE(0): Chose mode 153 at 70Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range) [ 114.752] (--) SAVAGE(0): Chose mode 117 at 70Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) [ 114.752] (--) SAVAGE(0): Chose mode 153 at 70Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range) [ 114.752] (--) SAVAGE(0): Chose mode 117 at 75Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) [ 114.752] (--) SAVAGE(0): Chose mode 153 at 70Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range) [ 114.752] (--) SAVAGE(0): Chose mode 117 at 85Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) [ 114.752] (--) SAVAGE(0): Chose mode 153 at 70Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "512x384" (hsync out of range) [ 114.752] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) [ 114.752] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) [ 114.752] (II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size) [ 114.752] (--) SAVAGE(0): Chose mode 111 at 60Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "640x480" (hsync out of range) [ 114.752] (II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size) [ 114.752] (--) SAVAGE(0): Chose mode 111 at 85Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "640x480" (hsync out of range) [ 114.752] (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size) [ 114.752] (--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name) [ 114.752] (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size) [ 114.752] (--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name) [ 114.752] (II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size) [ 114.752] (--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz. [ 114.752] (II) SAVAGE(0): Not using default mode "640x512" (no mode of this name) [ 114.753] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) [ 114.753] (--) SAVAGE(0): Chose mode 114 at 60Hz. [ 114.753] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) [ 114.753] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) [ 114.753] (--) SAVAGE(0): Chose mode 114 at 60Hz. [ 114.753] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) [ 114.753] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) [ 114.753] (--) SAVAGE(0): Chose mode 114 at 72Hz. [ 114.753] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) [ 114.753] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) [ 114.753] (--) SAVAGE(0): Chose mode 114 at 75Hz. [ 114.753] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) [ 114.753] (II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size) [ 114.753] (--) SAVAGE(0): Chose mode 114 at 85Hz. [ 114.753] (II) SAVAGE(0): Not using default mode "800x600" (hsync out of range) [ 114.753] (II) SAVAGE(0): Not using default mode "1792x1344" (width too large for virtual size) [ 114.753] (--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz. [ 114.753] (II) SAVAGE(0): Not using default mode "896x672" (no mode of this name) [ 114.753] (II) SAVAGE(0): Not using default mode "1792x1344" (width too large for virtual size) [ 114.753] (--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz. [ 114.753] (II) SAVAGE(0): Not using default mode "896x672" (no mode of this name) [ 114.753] (II) SAVAGE(0): Not using default mode "1856x1392" (width too large for virtual size) [ 114.753] (--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz. [ 114.753] (II) SAVAGE(0): Not using default mode "928x696" (no mode of this name) [ 114.753] (II) SAVAGE(0): Not using default mode "1856x1392" (width too large for virtual size) [ 114.753] (--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz. [ 114.753] (II) SAVAGE(0): Not using default mode "928x696" (no mode of this name) [ 114.753] (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size) [ 114.753] (--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz. [ 114.753] (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name) [ 114.753] (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size) [ 114.753] (--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz. [ 114.753] (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name) [ 114.753] (--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz. [ 114.754] (II) SAVAGE(0): Not using default mode "832x624" (no mode of this name) [ 114.754] (--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz. [ 114.754] (II) SAVAGE(0): Not using default mode "416x312" (no mode of this name) [ 114.754] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) [ 114.754] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 60Hz. [ 114.754] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) [ 114.754] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) [ 114.754] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 70Hz. [ 114.754] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) [ 114.754] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) [ 114.754] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 74Hz. [ 114.754] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) [ 114.754] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) [ 114.754] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 85Hz. [ 114.754] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) [ 114.754] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) [ 114.754] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 85Hz. [ 114.754] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) [ 114.754] (II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size) [ 114.754] (--) SAVAGE(0): No suitable BIOS mode found for 576x432 100Hz. [ 114.754] (II) SAVAGE(0): Not using default mode "576x432" (no mode of this name) [ 114.754] (II) SAVAGE(0): Not using default mode "1360x768" (width too large for virtual size) [ 114.754] (--) SAVAGE(0): No suitable BIOS mode found for 680x384 59Hz. [ 114.754] (II) SAVAGE(0): Not using default mode "680x384" (no mode of this name) [ 114.754] (II) SAVAGE(0): Not using default mode "1360x768" (width too large for virtual size) [ 114.754] (--) SAVAGE(0): No suitable BIOS mode found for 680x384 59Hz. [ 114.754] (II) SAVAGE(0): Not using default mode "680x384" (no mode of this name) [ 114.754] (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size) [ 114.754] (--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz. [ 114.754] (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name) [ 114.754] (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size) [ 114.754] (--) SAVAGE(0): No suitable BIOS mode found for 700x525 70Hz. [ 114.754] (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name) [ 114.755] (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size) [ 114.755] (--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz. [ 114.755] (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name) [ 114.755] (II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size) [ 114.755] (--) SAVAGE(0): No suitable BIOS mode found for 700x525 85Hz. [ 114.755] (II) SAVAGE(0): Not using default mode "700x525" (no mode of this name) [ 114.755] (II) SAVAGE(0): Not using default mode "1440x900" (width too large for virtual size) [ 114.755] (--) SAVAGE(0): No suitable BIOS mode found for 720x450 59Hz. [ 114.755] (II) SAVAGE(0): Not using default mode "720x450" (no mode of this name) [ 114.755] (II) SAVAGE(0): Not using default mode "1600x1024" (width too large for virtual size) [ 114.755] (--) SAVAGE(0): No suitable BIOS mode found for 800x512 60Hz. [ 114.755] (II) SAVAGE(0): Not using default mode "800x512" (no mode of this name) [ 114.755] (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size) [ 114.755] (--) SAVAGE(0): No suitable BIOS mode found for 840x525 59Hz. [ 114.755] (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name) [ 114.755] (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size) [ 114.755] (--) SAVAGE(0): No suitable BIOS mode found for 840x525 60Hz. [ 114.755] (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name) [ 114.755] (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size) [ 114.755] (--) SAVAGE(0): No suitable BIOS mode found for 840x525 69Hz. [ 114.755] (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name) [ 114.755] (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size) [ 114.755] (--) SAVAGE(0): No suitable BIOS mode found for 840x525 74Hz. [ 114.755] (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name) [ 114.755] (II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size) [ 114.755] (--) SAVAGE(0): No suitable BIOS mode found for 840x525 85Hz. [ 114.755] (II) SAVAGE(0): Not using default mode "840x525" (no mode of this name) [ 114.755] (II) SAVAGE(0): Not using default mode "1920x1080" (width too large for virtual size) [ 114.755] (--) SAVAGE(0): No suitable BIOS mode found for 960x540 59Hz. [ 114.755] (II) SAVAGE(0): Not using default mode "960x540" (no mode of this name) [ 114.755] (II) SAVAGE(0): Not using default mode "1920x1200" (width too large for virtual size) [ 114.755] (--) SAVAGE(0): No suitable BIOS mode found for 960x600 59Hz. [ 114.756] (II) SAVAGE(0): Not using default mode "960x600" (no mode of this name) [ 114.756] (II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size) [ 114.756] (--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz. [ 114.756] (II) SAVAGE(0): Not using default mode "960x720" (no mode of this name) [ 114.756] (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size) [ 114.756] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 114.756] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) [ 114.756] (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size) [ 114.756] (--) SAVAGE(0): Chose mode 117 at 75Hz. [ 114.756] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) [ 114.756] (II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size) [ 114.756] (--) SAVAGE(0): Chose mode 117 at 85Hz. [ 114.756] (II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range) [ 114.756] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 114.756] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 114.756] (--) SAVAGE(0): Chose mode 114 at 60Hz. [ 114.757] (--) SAVAGE(0): Chose mode 114 at 60Hz. [ 114.757] (--) SAVAGE(0): Chose mode 111 at 60Hz. [ 114.757] (--) SAVAGE(0): Chose mode 143 at 72Hz. [ 114.757] (--) SAVAGE(0): Chose mode 143 at 72Hz. [ 114.757] (--) SAVAGE(0): Chose mode 133 at 72Hz. [ 114.757] (--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024) [ 114.757] (**) SAVAGE(0): *Driver mode "1024x768": 56.0 MHz, 47.3 kHz, 59.9 Hz [ 114.757] (II) SAVAGE(0): Modeline "1024x768"x59.9 56.00 1024 1072 1104 1184 768 771 775 790 +hsync -vsync (47.3 kHz ezP) [ 114.757] (**) SAVAGE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz [ 114.757] (II) SAVAGE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd) [ 114.757] (**) SAVAGE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz [ 114.757] (II) SAVAGE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd) [ 114.757] (**) SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz [ 114.757] (II) SAVAGE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd) [ 114.757] (**) SAVAGE(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) [ 114.757] (II) SAVAGE(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd) [ 114.757] (**) SAVAGE(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) [ 114.757] (II) SAVAGE(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd) [ 114.757] (**) SAVAGE(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) [ 114.757] (II) SAVAGE(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd) [ 114.757] (==) SAVAGE(0): DPI set to (96, 96) [ 114.757] (II) Loading sub module "fb" [ 114.757] (II) LoadModule: "fb" [ 114.758] (II) Loading /usr/lib/xorg/modules/libfb.so [ 114.758] (II) Module fb: vendor="X.Org Foundation" [ 114.758] compiled for 1.12.4, module version = 1.0.0 [ 114.758] ABI class: X.Org ANSI C Emulation, version 0.4 [ 114.759] (II) Loading sub module "xaa" [ 114.759] (II) LoadModule: "xaa" [ 114.759] (II) Loading /usr/lib/xorg/modules/libxaa.so [ 114.759] (II) Module xaa: vendor="X.Org Foundation" [ 114.759] compiled for 1.12.4, module version = 1.2.1 [ 114.759] ABI class: X.Org Video Driver, version 12.1 [ 114.760] (II) Loading sub module "ramdac" [ 114.760] (II) LoadModule: "ramdac" [ 114.760] (II) Module "ramdac" already built-in [ 114.760] (II) UnloadModule: "vesa" [ 114.760] (II) Unloading vesa [ 114.760] (II) UnloadModule: "fbdev" [ 114.760] (II) Unloading fbdev [ 114.760] (II) UnloadSubModule: "fbdevhw" [ 114.760] (II) Unloading fbdevhw [ 114.760] (II) Loading sub module "int10" [ 114.760] (II) LoadModule: "int10" [ 114.761] (II) Loading /usr/lib/xorg/modules/libint10.so [ 114.761] (II) Module int10: vendor="X.Org Foundation" [ 114.761] compiled for 1.12.4, module version = 1.0.0 [ 114.761] ABI class: X.Org Video Driver, version 12.1 [ 114.761] (II) SAVAGE(0): initializing int10 [ 114.763] (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000 [ 114.763] (II) SAVAGE(0): VESA BIOS detected [ 114.764] (II) SAVAGE(0): VESA VBE Version 2.0 [ 114.764] (II) SAVAGE(0): VESA VBE Total Mem: 15168 kB [ 114.764] (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Paramont BIOS [ 114.764] (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0 [ 114.764] (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated. [ 114.764] (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0 [ 114.764] (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.0 [ 114.769] (II) SAVAGE(0): 4740 kB of Videoram needed for 3D; 16384 kB of Videoram available [ 114.769] (II) SAVAGE(0): Sufficient Videoram available for 3D [ 114.769] (II) SAVAGE(0): [drm] bpp: 16 depth: 16 [ 114.769] (II) SAVAGE(0): [drm] Sarea 2200+284: 2484 [ 114.769] drmOpenDevice: node name is /dev/dri/card0 [ 114.769] drmOpenDevice: open result is 11, (OK) [ 114.769] drmOpenDevice: node name is /dev/dri/card0 [ 114.769] drmOpenDevice: open result is 11, (OK) [ 114.769] drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 114.769] drmOpenDevice: node name is /dev/dri/card0 [ 114.769] drmOpenDevice: open result is 11, (OK) [ 114.769] drmOpenByBusid: drmOpenMinor returns 11 [ 114.769] drmOpenByBusid: Interface 1.4 failed, trying 1.1 [ 114.769] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 114.769] (II) [drm] DRM interface version 1.0 [ 114.769] (EE) [drm] Could not set DRM device bus ID. [ 114.770] (EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI. [ 114.770] (EE) SAVAGE(0): DRI isn't enabled [ 114.770] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 115.605] (II) SAVAGE(0): Using 1280 lines for offscreen memory. [ 115.605] (II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA) [ 115.605] Screen to screen bit blits [ 115.605] Solid filled rectangles [ 115.605] 8x8 mono pattern filled rectangles [ 115.605] Indirect CPU to Screen color expansion [ 115.605] Solid Lines [ 115.605] Image Writes [ 115.605] Setting up tile and stipple cache: [ 115.605] 32 128x128 slots [ 115.605] 12 256x256 slots [ 115.605] (==) SAVAGE(0): Backing store disabled [ 115.606] (==) SAVAGE(0): DPMS enabled [ 115.606] (WW) SAVAGE(0): Direct rendering disabled [ 115.606] (==) RandR enabled [ 115.606] (II) Initializing built-in extension Generic Event Extension [ 115.606] (II) Initializing built-in extension SHAPE [ 115.606] (II) Initializing built-in extension MIT-SHM [ 115.606] (II) Initializing built-in extension XInputExtension [ 115.606] (II) Initializing built-in extension XTEST [ 115.606] (II) Initializing built-in extension BIG-REQUESTS [ 115.606] (II) Initializing built-in extension SYNC [ 115.606] (II) Initializing built-in extension XKEYBOARD [ 115.606] (II) Initializing built-in extension XC-MISC [ 115.606] (II) Initializing built-in extension SECURITY [ 115.606] (II) Initializing built-in extension XINERAMA [ 115.606] (II) Initializing built-in extension XFIXES [ 115.606] (II) Initializing built-in extension RENDER [ 115.606] (II) Initializing built-in extension RANDR [ 115.606] (II) Initializing built-in extension COMPOSITE [ 115.606] (II) Initializing built-in extension DAMAGE [ 115.606] (II) SELinux: Disabled on system [ 115.631] (II) AIGLX: Screen 0 is not DRI2 capable [ 115.631] (II) AIGLX: Screen 0 is not DRI capable [ 116.455] (II) AIGLX: Loaded and initialized swrast [ 116.455] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 116.737] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 116.738] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 116.738] (II) LoadModule: "evdev" [ 116.738] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 116.739] (II) Module evdev: vendor="X.Org Foundation" [ 116.739] compiled for 1.12.1, module version = 2.7.0 [ 116.739] Module class: X.Org XInput Driver [ 116.739] ABI class: X.Org XInput driver, version 16.0 [ 116.739] (II) Using input driver 'evdev' for 'Power Button' [ 116.739] (**) Power Button: always reports core events [ 116.739] (**) evdev: Power Button: Device: "/dev/input/event5" [ 116.739] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 116.739] (--) evdev: Power Button: Found keys [ 116.739] (II) evdev: Power Button: Configuring as keyboard [ 116.739] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5" [ 116.739] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 116.739] (**) Option "xkb_rules" "evdev" [ 116.739] (**) Option "xkb_model" "pc105" [ 116.739] (**) Option "xkb_layout" "de" [ 116.927] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 116.927] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 116.927] (II) Using input driver 'evdev' for 'Video Bus' [ 116.927] (**) Video Bus: always reports core events [ 116.927] (**) evdev: Video Bus: Device: "/dev/input/event4" [ 116.927] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 116.927] (--) evdev: Video Bus: Found keys [ 116.927] (II) evdev: Video Bus: Configuring as keyboard [ 116.927] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input4/event4" [ 116.927] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 116.928] (**) Option "xkb_rules" "evdev" [ 116.928] (**) Option "xkb_model" "pc105" [ 116.928] (**) Option "xkb_layout" "de" [ 116.929] (II) config/udev: Adding input device Lid Switch (/dev/input/event2) [ 116.929] (II) No input driver specified, ignoring this device. [ 116.929] (II) This device may have been added with another device file. [ 116.930] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 116.930] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 116.930] (II) Using input driver 'evdev' for 'Sleep Button' [ 116.930] (**) Sleep Button: always reports core events [ 116.930] (**) evdev: Sleep Button: Device: "/dev/input/event3" [ 116.930] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 116.930] (--) evdev: Sleep Button: Found keys [ 116.930] (II) evdev: Sleep Button: Configuring as keyboard [ 116.930] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3" [ 116.930] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 116.930] (**) Option "xkb_rules" "evdev" [ 116.930] (**) Option "xkb_model" "pc105" [ 116.930] (**) Option "xkb_layout" "de" [ 116.932] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 116.932] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 116.932] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 116.932] (**) Logitech USB Optical Mouse: always reports core events [ 116.932] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 116.932] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a [ 116.932] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons [ 116.933] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 116.933] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 116.933] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 116.933] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 116.933] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 116.933] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 116.933] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 116.933] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input10/event1" [ 116.933] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9) [ 116.933] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 116.933] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 116.933] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 116.933] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 116.934] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 116.934] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 116.934] (II) No input driver specified, ignoring this device. [ 116.934] (II) This device may have been added with another device file. [ 116.935] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 116.935] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 116.935] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 116.935] (**) AT Translated Set 2 keyboard: always reports core events [ 116.935] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 116.935] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 116.935] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 116.935] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 116.935] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 116.935] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) [ 116.935] (**) Option "xkb_rules" "evdev" [ 116.944] (**) Option "xkb_model" "pc105" [ 116.944] (**) Option "xkb_layout" "de" [ 116.945] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event7) [ 116.945] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall" [ 116.945] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint' [ 116.945] (**) TPPS/2 IBM TrackPoint: always reports core events [ 116.945] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event7" [ 116.945] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa [ 116.945] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons [ 116.945] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes [ 116.945] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes [ 116.945] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse [ 116.945] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5 [ 116.946] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 116.946] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7" [ 116.946] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 11) [ 116.946] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes. [ 116.946] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1 [ 116.946] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0 [ 116.946] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000 [ 116.946] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4 [ 116.947] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1) [ 116.947] (II) No input driver specified, ignoring this device. [ 116.947] (II) This device may have been added with another device file. [ 116.947] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 116.947] (II) No input driver specified, ignoring this device. [ 116.947] (II) This device may have been added with another device file. [ 116.953] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event8) [ 116.953] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall" [ 116.953] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons' [ 116.953] (**) ThinkPad Extra Buttons: always reports core events [ 116.953] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event8" [ 116.953] (--) evdev: ThinkPad Extra Buttons: Vendor 0x1014 Product 0x5054 [ 116.953] (--) evdev: ThinkPad Extra Buttons: Found keys [ 116.953] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard [ 116.953] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input8/event8" [ 116.953] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 12) [ 116.953] (**) Option "xkb_rules" "evdev" [ 116.953] (**) Option "xkb_model" "pc105" [ 116.953] (**) Option "xkb_layout" "de" [ 116.955] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event9) [ 116.955] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" [ 116.955] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device' [ 116.955] (**) ACPI Virtual Keyboard Device: always reports core events [ 116.955] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event9" [ 116.955] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0 [ 116.955] (--) evdev: ACPI Virtual Keyboard Device: Found keys [ 116.955] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard [ 116.955] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9" [ 116.955] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13) [ 116.955] (**) Option "xkb_rules" "evdev" [ 116.955] (**) Option "xkb_model" "pc105" [ 116.955] (**) Option "xkb_layout" "de" [ 178.722] (II) config/udev: removing device Logitech USB Optical Mouse [ 178.722] (II) evdev: Logitech USB Optical Mouse: Close [ 178.722] (II) UnloadModule: "evdev" [ 180.476] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 180.476] (II) No input driver specified, ignoring this device. [ 180.476] (II) This device may have been added with another device file. [ 180.479] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 180.479] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 180.479] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 180.480] (**) Logitech USB Optical Mouse: always reports core events [ 180.480] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 180.480] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a [ 180.480] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons [ 180.480] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 180.480] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 180.480] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 180.480] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 180.480] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 180.480] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 180.480] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 180.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input11/event1" [ 180.481] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9) [ 180.481] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 180.481] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 180.481] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 180.481] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 180.481] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 4319.550] (II) Open ACPI successful (/var/run/acpid.socket) [ 4319.551] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 4385.044] (II) Open ACPI successful (/var/run/acpid.socket) [ 4385.045] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 4455.250] (II) config/udev: removing device Logitech USB Optical Mouse [ 4455.250] (II) evdev: Logitech USB Optical Mouse: Close [ 4455.250] (II) UnloadModule: "evdev" [ 4457.470] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 4457.470] (II) No input driver specified, ignoring this device. [ 4457.470] (II) This device may have been added with another device file. [ 4457.478] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 4457.478] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 4457.478] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 4457.478] (**) Logitech USB Optical Mouse: always reports core events [ 4457.479] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 4457.479] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a [ 4457.479] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons [ 4457.479] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 4457.479] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 4457.479] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 4457.479] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 4457.479] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 4457.479] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 4457.479] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 4457.479] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input12/event1" [ 4457.479] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9) [ 4457.479] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 4457.480] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 4457.480] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 4457.480] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 4457.480] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 4581.071] (II) Open ACPI successful (/var/run/acpid.socket) [ 4581.071] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 4814.085] (II) Open ACPI successful (/var/run/acpid.socket) [ 4814.086] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 4830.155] (II) Open ACPI successful (/var/run/acpid.socket) [ 4830.156] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 4853.277] (II) Open ACPI successful (/var/run/acpid.socket) [ 4853.277] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 5216.572] [mi] EQ overflowing. Additional events will be discarded until existing events are processed. [ 5216.573] [ 5216.573] Backtrace: [ 5216.645] 0: X (xorg_backtrace+0x49) [0xb76d4769] [ 5216.645] 1: X (mieqEnqueue+0x22b) [0xb76b305b] [ 5216.645] 2: X (0xb7557000+0x51405) [0xb75a8405] [ 5216.645] 3: X (xf86PostMotionEventM+0x24b) [0xb75e256b] [ 5216.645] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x35ad) [0xb6cc15ad] [ 5216.645] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x4a2c) [0xb6cc2a2c] [ 5216.645] 6: X (0xb7557000+0x7ac01) [0xb75d1c01] [ 5216.645] 7: X (0xb7557000+0xa094a) [0xb75f794a] [ 5216.645] 8: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb7535400] [ 5216.645] 9: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0xa119) [0xb6f11119] [ 5216.645] 10: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0x5ac6) [0xb6f0cac6] [ 5216.645] 11: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0xadf8) [0xb6d0edf8] [ 5216.645] 12: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x548d3) [0xb6d588d3] [ 5216.646] 13: X (0xb7557000+0x10929d) [0xb766029d] [ 5216.646] 14: X (0xb7557000+0x15b60f) [0xb76b260f] [ 5216.646] 15: X (0xb7557000+0x16cd21) [0xb76c3d21] [ 5216.646] 16: X (0xb7557000+0x16d50c) [0xb76c450c] [ 5216.646] 17: X (0xb7557000+0x16d75e) [0xb76c475e] [ 5216.646] 18: X (0xb7557000+0xbe544) [0xb7615544] [ 5216.646] 19: X (miPointerUpdateSprite+0x30d) [0xb76be6ed] [ 5216.646] 20: X (mieqProcessInputEvents+0x11e) [0xb76b35ce] [ 5216.646] 21: X (ProcessInputEvents+0x14) [0xb75d1cb4] [ 5216.647] 22: X (0xb7557000+0x3c17c) [0xb759317c] [ 5216.647] 23: X (0xb7557000+0x29e95) [0xb7580e95] [ 5216.647] 24: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf5) [0xb717d8f5] [ 5216.647] 25: X (0xb7557000+0x2a1e9) [0xb75811e9] [ 5216.647] [ 5216.647] [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack. [ 5216.647] [mi] mieq is *NOT* the cause. It is a victim. [ 5216.972] [mi] EQ overflow continuing. 100 events have been dropped. [ 5216.973] [ 5216.973] Backtrace: [ 5216.974] 0: X (xorg_backtrace+0x49) [0xb76d4769] [ 5216.974] 1: X (mieqEnqueue+0xfb) [0xb76b2f2b] [ 5216.975] 2: X (0xb7557000+0x51405) [0xb75a8405] [ 5216.975] 3: X (xf86PostMotionEventM+0x24b) [0xb75e256b] [ 5216.976] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x35ad) [0xb6cc15ad] [ 5216.977] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x4a2c) [0xb6cc2a2c] [ 5216.977] 6: X (0xb7557000+0x7ac01) [0xb75d1c01] [ 5216.978] 7: X (0xb7557000+0xa094a) [0xb75f794a] [ 5216.978] 8: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb7535400] [ 5216.984] 9: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0xa119) [0xb6f11119] [ 5216.984] 10: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0x5ac6) [0xb6f0cac6] [ 5216.984] 11: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0xadf8) [0xb6d0edf8] [ 5216.985] 12: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x548d3) [0xb6d588d3] [ 5216.985] 13: X (0xb7557000+0x10929d) [0xb766029d] [ 5216.985] 14: X (0xb7557000+0x15b60f) [0xb76b260f] [ 5216.985] 15: X (0xb7557000+0x16cd21) [0xb76c3d21] [ 5216.985] 16: X (0xb7557000+0x16d50c) [0xb76c450c] [ 5216.986] 17: X (0xb7557000+0x16d75e) [0xb76c475e] [ 5216.986] 18: X (0xb7557000+0xbe544) [0xb7615544] [ 5216.986] 19: X (miPointerUpdateSprite+0x30d) [0xb76be6ed] [ 5216.986] 20: X (mieqProcessInputEvents+0x11e) [0xb76b35ce] [ 5216.986] 21: X (ProcessInputEvents+0x14) [0xb75d1cb4] [ 5216.986] 22: X (0xb7557000+0x3c17c) [0xb759317c] [ 5216.986] 23: X (0xb7557000+0x29e95) [0xb7580e95] [ 5216.989] 24: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf5) [0xb717d8f5] [ 5216.989] 25: X (0xb7557000+0x2a1e9) [0xb75811e9] [ 5216.989] [ 5217.375] [mi] EQ overflow continuing. 200 events have been dropped. [ 5217.375] [ 5217.376] Backtrace: [ 5217.377] 0: X (xorg_backtrace+0x49) [0xb76d4769] [ 5217.377] 1: X (mieqEnqueue+0xfb) [0xb76b2f2b] [ 5217.378] 2: X (0xb7557000+0x51405) [0xb75a8405] [ 5217.378] 3: X (xf86PostMotionEventM+0x24b) [0xb75e256b] [ 5217.379] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x35ad) [0xb6cc15ad] [ 5217.379] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x4a2c) [0xb6cc2a2c] [ 5217.380] 6: X (0xb7557000+0x7ac01) [0xb75d1c01] [ 5217.380] 7: X (0xb7557000+0xa094a) [0xb75f794a] [ 5217.380] 8: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb7535400] [ 5217.381] 9: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0xa119) [0xb6f11119] [ 5217.381] 10: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0x5ac6) [0xb6f0cac6] [ 5217.381] 11: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0xadf8) [0xb6d0edf8] [ 5217.381] 12: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x548d3) [0xb6d588d3] [ 5217.381] 13: X (0xb7557000+0x10929d) [0xb766029d] [ 5217.381] 14: X (0xb7557000+0x15b60f) [0xb76b260f] [ 5217.382] 15: X (0xb7557000+0x16cd21) [0xb76c3d21] [ 5217.382] 16: X (0xb7557000+0x16d50c) [0xb76c450c] [ 5217.382] 17: X (0xb7557000+0x16d75e) [0xb76c475e] [ 5217.382] 18: X (0xb7557000+0xbe544) [0xb7615544] [ 5217.383] 19: X (miPointerUpdateSprite+0x30d) [0xb76be6ed] [ 5217.383] 20: X (mieqProcessInputEvents+0x11e) [0xb76b35ce] [ 5217.383] 21: X (ProcessInputEvents+0x14) [0xb75d1cb4] [ 5217.385] 22: X (0xb7557000+0x3c17c) [0xb759317c] [ 5217.386] 23: X (0xb7557000+0x29e95) [0xb7580e95] [ 5217.386] 24: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf5) [0xb717d8f5] [ 5217.386] 25: X (0xb7557000+0x2a1e9) [0xb75811e9] [ 5217.386] [ 5223.223] [mi] EQ overflow continuing. 300 events have been dropped. [ 5223.224] [ 5223.224] Backtrace: [ 5223.225] 0: X (xorg_backtrace+0x49) [0xb76d4769] [ 5223.225] 1: X (mieqEnqueue+0xfb) [0xb76b2f2b] [ 5223.226] 2: X (0xb7557000+0x51405) [0xb75a8405] [ 5223.226] 3: X (xf86PostMotionEventM+0x24b) [0xb75e256b] [ 5223.227] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x35ad) [0xb6cc15ad] [ 5223.227] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x4a2c) [0xb6cc2a2c] [ 5223.228] 6: X (0xb7557000+0x7ac01) [0xb75d1c01] [ 5223.228] 7: X (0xb7557000+0xa094a) [0xb75f794a] [ 5223.229] 8: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb7535400] [ 5223.229] 9: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0xa119) [0xb6f11119] [ 5223.229] 10: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0x5ac6) [0xb6f0cac6] [ 5223.229] 11: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0xadf8) [0xb6d0edf8] [ 5223.229] 12: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x548d3) [0xb6d588d3] [ 5223.230] 13: X (0xb7557000+0x10929d) [0xb766029d] [ 5223.231] 14: X (0xb7557000+0x15b60f) [0xb76b260f] [ 5223.231] 15: X (0xb7557000+0x16cd21) [0xb76c3d21] [ 5223.231] 16: X (0xb7557000+0x16d50c) [0xb76c450c] [ 5223.231] 17: X (0xb7557000+0x16d75e) [0xb76c475e] [ 5223.231] 18: X (0xb7557000+0xbe544) [0xb7615544] [ 5223.231] 19: X (miPointerUpdateSprite+0x30d) [0xb76be6ed] [ 5223.231] 20: X (mieqProcessInputEvents+0x11e) [0xb76b35ce] [ 5223.232] 21: X (ProcessInputEvents+0x14) [0xb75d1cb4] [ 5223.232] 22: X (0xb7557000+0x3c17c) [0xb759317c] [ 5223.232] 23: X (0xb7557000+0x29e95) [0xb7580e95] [ 5223.232] 24: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf5) [0xb717d8f5] [ 5223.234] 25: X (0xb7557000+0x2a1e9) [0xb75811e9] [ 5223.234] [ 5223.743] [mi] EQ overflow continuing. 400 events have been dropped. [ 5223.744] [ 5223.744] Backtrace: [ 5223.745] 0: X (xorg_backtrace+0x49) [0xb76d4769] [ 5223.745] 1: X (mieqEnqueue+0xfb) [0xb76b2f2b] [ 5223.746] 2: X (0xb7557000+0x51405) [0xb75a8405] [ 5223.746] 3: X (xf86PostMotionEventM+0x24b) [0xb75e256b] [ 5223.747] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x35ad) [0xb6cc15ad] [ 5223.748] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x4a2c) [0xb6cc2a2c] [ 5223.748] 6: X (0xb7557000+0x7ac01) [0xb75d1c01] [ 5223.749] 7: X (0xb7557000+0xa094a) [0xb75f794a] [ 5223.749] 8: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb7535400] [ 5223.749] 9: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0xa119) [0xb6f11119] [ 5223.749] 10: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0x5ac6) [0xb6f0cac6] [ 5223.750] 11: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0xadf8) [0xb6d0edf8] [ 5223.750] 12: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x548d3) [0xb6d588d3] [ 5223.750] 13: X (0xb7557000+0x10929d) [0xb766029d] [ 5223.750] 14: X (0xb7557000+0x15b60f) [0xb76b260f] [ 5223.750] 15: X (0xb7557000+0x16cd21) [0xb76c3d21] [ 5223.751] 16: X (0xb7557000+0x16d50c) [0xb76c450c] [ 5223.751] 17: X (0xb7557000+0x16d75e) [0xb76c475e] [ 5223.751] 18: X (0xb7557000+0xbe544) [0xb7615544] [ 5223.751] 19: X (miPointerUpdateSprite+0x30d) [0xb76be6ed] [ 5223.751] 20: X (mieqProcessInputEvents+0x11e) [0xb76b35ce] [ 5223.751] 21: X (ProcessInputEvents+0x14) [0xb75d1cb4] [ 5223.753] 22: X (0xb7557000+0x3c17c) [0xb759317c] [ 5223.753] 23: X (0xb7557000+0x29e95) [0xb7580e95] [ 5223.754] 24: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf5) [0xb717d8f5] [ 5223.754] 25: X (0xb7557000+0x2a1e9) [0xb75811e9] [ 5223.754] [ 5250.904] [mi] EQ processing has resumed after 475 dropped events. [ 5250.904] [mi] This may be caused my a misbehaving driver monopolizing the server's resources. [ 5312.320] (II) Open ACPI successful (/var/run/acpid.socket) [ 5312.320] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 5509.782] [mi] EQ overflowing. Additional events will be discarded until existing events are processed. [ 5509.783] [ 5509.783] Backtrace: [ 5509.783] 0: X (xorg_backtrace+0x49) [0xb76d4769] [ 5509.783] 1: X (mieqEnqueue+0x22b) [0xb76b305b] [ 5509.783] 2: X (0xb7557000+0x51405) [0xb75a8405] [ 5509.783] 3: X (xf86PostMotionEventM+0x24b) [0xb75e256b] [ 5509.783] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x35ad) [0xb6cc15ad] [ 5509.784] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x4a2c) [0xb6cc2a2c] [ 5509.784] 6: X (0xb7557000+0x7ac01) [0xb75d1c01] [ 5509.784] 7: X (0xb7557000+0xa094a) [0xb75f794a] [ 5509.784] 8: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb7535400] [ 5509.784] 9: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0xa119) [0xb6f11119] [ 5509.784] 10: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0x5ac6) [0xb6f0cac6] [ 5509.784] 11: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x8bd6) [0xb6d0cbd6] [ 5509.784] 12: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x558e3) [0xb6d598e3] [ 5509.784] 13: X (0xb7557000+0x10757b) [0xb765e57b] [ 5509.784] 14: X (0xb7557000+0xf6a98) [0xb764da98] [ 5509.785] 15: X (miCompositeRects+0x99) [0xb764dbb9] [ 5509.785] 16: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x56377) [0xb6d5a377] [ 5509.785] 17: X (CompositeRects+0x78) [0xb7651708] [ 5509.785] 18: X (0xb7557000+0xfee81) [0xb7655e81] [ 5509.785] 19: X (0xb7557000+0xfacae) [0xb7651cae] [ 5509.785] 20: X (0xb7557000+0x3c375) [0xb7593375] [ 5509.785] 21: X (0xb7557000+0x29e95) [0xb7580e95] [ 5509.785] 22: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf5) [0xb717d8f5] [ 5509.785] 23: X (0xb7557000+0x2a1e9) [0xb75811e9] [ 5509.786] [ 5509.786] [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack. [ 5509.786] [mi] mieq is *NOT* the cause. It is a victim. [ 5510.309] [mi] EQ overflow continuing. 100 events have been dropped. [ 5510.309] [ 5510.309] Backtrace: [ 5510.310] 0: X (xorg_backtrace+0x49) [0xb76d4769] [ 5510.310] 1: X (mieqEnqueue+0xfb) [0xb76b2f2b] [ 5510.310] 2: X (0xb7557000+0x51405) [0xb75a8405] [ 5510.310] 3: X (xf86PostMotionEventM+0x24b) [0xb75e256b] [ 5510.310] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x35ad) [0xb6cc15ad] [ 5510.310] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x4a2c) [0xb6cc2a2c] [ 5510.310] 6: X (0xb7557000+0x7ac01) [0xb75d1c01] [ 5510.310] 7: X (0xb7557000+0xa094a) [0xb75f794a] [ 5510.311] 8: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb7535400] [ 5510.311] 9: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0xa119) [0xb6f11119] [ 5510.311] 10: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0x5ac6) [0xb6f0cac6] [ 5510.311] 11: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x8bd6) [0xb6d0cbd6] [ 5510.311] 12: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x558e3) [0xb6d598e3] [ 5510.311] 13: X (0xb7557000+0x10757b) [0xb765e57b] [ 5510.311] 14: X (0xb7557000+0xf6a98) [0xb764da98] [ 5510.311] 15: X (miCompositeRects+0x99) [0xb764dbb9] [ 5510.311] 16: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x56377) [0xb6d5a377] [ 5510.311] 17: X (CompositeRects+0x78) [0xb7651708] [ 5510.312] 18: X (0xb7557000+0xfee81) [0xb7655e81] [ 5510.312] 19: X (0xb7557000+0xfacae) [0xb7651cae] [ 5510.312] 20: X (0xb7557000+0x3c375) [0xb7593375] [ 5510.316] 21: X (0xb7557000+0x29e95) [0xb7580e95] [ 5510.316] 22: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf5) [0xb717d8f5] [ 5510.316] 23: X (0xb7557000+0x2a1e9) [0xb75811e9] [ 5510.316] [ 5510.710] [mi] EQ overflow continuing. 200 events have been dropped. [ 5510.710] [ 5510.710] Backtrace: [ 5510.711] 0: X (xorg_backtrace+0x49) [0xb76d4769] [ 5510.711] 1: X (mieqEnqueue+0xfb) [0xb76b2f2b] [ 5510.711] 2: X (0xb7557000+0x51405) [0xb75a8405] [ 5510.711] 3: X (xf86PostMotionEventM+0x24b) [0xb75e256b] [ 5510.711] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x35ad) [0xb6cc15ad] [ 5510.711] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x4a2c) [0xb6cc2a2c] [ 5510.711] 6: X (0xb7557000+0x7ac01) [0xb75d1c01] [ 5510.711] 7: X (0xb7557000+0xa094a) [0xb75f794a] [ 5510.712] 8: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb7535400] [ 5510.712] 9: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0xa119) [0xb6f11119] [ 5510.712] 10: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0x5ac6) [0xb6f0cac6] [ 5510.712] 11: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x8bd6) [0xb6d0cbd6] [ 5510.712] 12: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x558e3) [0xb6d598e3] [ 5510.712] 13: X (0xb7557000+0x10757b) [0xb765e57b] [ 5510.712] 14: X (0xb7557000+0xf6a98) [0xb764da98] [ 5510.712] 15: X (miCompositeRects+0x99) [0xb764dbb9] [ 5510.712] 16: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x56377) [0xb6d5a377] [ 5510.712] 17: X (CompositeRects+0x78) [0xb7651708] [ 5510.713] 18: X (0xb7557000+0xfee81) [0xb7655e81] [ 5510.713] 19: X (0xb7557000+0xfacae) [0xb7651cae] [ 5510.713] 20: X (0xb7557000+0x3c375) [0xb7593375] [ 5510.713] 21: X (0xb7557000+0x29e95) [0xb7580e95] [ 5510.713] 22: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf5) [0xb717d8f5] [ 5510.713] 23: X (0xb7557000+0x2a1e9) [0xb75811e9] [ 5510.713] [ 5512.644] [mi] Increasing EQ size to 512 to prevent dropped events. [ 5512.645] [mi] EQ processing has resumed after 293 dropped events. [ 5512.645] [mi] This may be caused my a misbehaving driver monopolizing the server's resources. [ 5724.017] (II) config/udev: removing device Logitech USB Optical Mouse [ 5724.018] (II) evdev: Logitech USB Optical Mouse: Close [ 5724.018] (II) UnloadModule: "evdev" [ 5725.966] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 5725.966] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 5725.966] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 5725.966] (**) Logitech USB Optical Mouse: always reports core events [ 5725.966] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 5725.966] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a [ 5725.966] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons [ 5725.966] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 5725.966] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 5725.966] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 5725.966] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 5725.966] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 5725.966] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 5725.966] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 5725.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input13/event1" [ 5725.967] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9) [ 5725.967] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 5725.967] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 5725.967] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 5725.967] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 5725.968] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 5725.970] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 5725.970] (II) No input driver specified, ignoring this device. [ 5725.970] (II) This device may have been added with another device file. [ 5814.390] (II) Open ACPI successful (/var/run/acpid.socket) [ 5814.391] (--) SAVAGE(0): Chose mode 117 at 60Hz. [ 5932.884] [mi] EQ overflowing. Additional events will be discarded until existing events are processed. [ 5932.884] [ 5932.884] Backtrace: [ 5932.884] 0: X (xorg_backtrace+0x49) [0xb76d4769] [ 5932.884] 1: X (mieqEnqueue+0x22b) [0xb76b305b] [ 5932.884] 2: X (0xb7557000+0x51405) [0xb75a8405] [ 5932.884] 3: X (xf86PostMotionEventM+0x24b) [0xb75e256b] [ 5932.885] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x35ad) [0xb6cc15ad] [ 5932.885] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb6cbe000+0x4a2c) [0xb6cc2a2c] [ 5932.885] 6: X (0xb7557000+0x7ac01) [0xb75d1c01] [ 5932.885] 7: X (0xb7557000+0xa094a) [0xb75f794a] [ 5932.885] 8: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb7535400] [ 5932.885] 9: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0xa119) [0xb6f11119] [ 5932.885] 10: /usr/lib/xorg/modules/drivers/savage_drv.so (0xb6f07000+0x5ac6) [0xb6f0cac6] [ 5932.885] 11: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x8bd6) [0xb6d0cbd6] [ 5932.885] 12: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x558e3) [0xb6d598e3] [ 5932.885] 13: X (0xb7557000+0x10757b) [0xb765e57b] [ 5932.885] 14: X (0xb7557000+0xf6a98) [0xb764da98] [ 5932.886] 15: X (miCompositeRects+0x99) [0xb764dbb9] [ 5932.886] 16: /usr/lib/xorg/modules/libxaa.so (0xb6d04000+0x56377) [0xb6d5a377] [ 5932.886] 17: X (CompositeRects+0x78) [0xb7651708] [ 5932.886] 18: X (0xb7557000+0xfee81) [0xb7655e81] [ 5932.886] 19: X (0xb7557000+0xfacae) [0xb7651cae] [ 5932.886] 20: X (0xb7557000+0x3c375) [0xb7593375] [ 5932.886] 21: X (0xb7557000+0x29e95) [0xb7580e95] [ 5932.886] 22: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf5) [0xb717d8f5] [ 5932.887] 23: X (0xb7557000+0x2a1e9) [0xb75811e9] [ 5932.887] [ 5932.887] [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack. [ 5932.887] [mi] mieq is *NOT* the cause. It is a victim. [ 5934.172] [mi] Increasing EQ size to 1024 to prevent dropped events. [ 5934.175] [mi] EQ processing has resumed after 43 dropped events. [ 5934.180] [mi] This may be caused my a misbehaving driver monopolizing the server's resources. [ 5992.347] (II) Open ACPI successful (/var/run/acpid.socket) [ 5992.347] (--) SAVAGE(0): Chose mode 117 at 60Hz.
Attachment:
glxinfo-vt
Description: Binary data
Attachment:
dmesg
Description: Binary data