[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#692945: /usr/lib/xorg/modules/drivers/intel_drv.so: intel_drv.so: Crashed when using gthumb



Package: xserver-xorg-video-intel
Version: 2:2.19.0-6
Severity: normal
File: /usr/lib/xorg/modules/drivers/intel_drv.so

Dear Maintainer,

I was using gthumb and the whole X crashed. In Xorg.log.old there is a
backtrace:

[    63.624] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  1937.141] 
[  1937.151] Backtrace:
[  1937.745] 0: /usr/bin/X (xorg_backtrace+0x49) [0xb77236d9]
[  1937.745] 1: /usr/bin/X (0xb75a6000+0x1810f6) [0xb77270f6]
[  1937.745] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb758740c]
[  1937.745] 3: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (0xb722a000+0x1134e0) [0xb733d4e0]
[  1937.745] 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb6f39000+0x116dc) [0xb6f4a6dc]
[  1937.745] 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb6f39000+0x134f4) [0xb6f4c4f4]
[  1937.746] 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb6f39000+0xcb846) [0xb7004846]
[  1937.746] 7: /usr/bin/X (CompositeTrapezoids+0xab) [0xb76a07ab]
[  1937.746] 8: /usr/bin/X (0xb75a6000+0xff9a0) [0xb76a59a0]
[  1937.746] 9: /usr/bin/X (0xb75a6000+0xfac6e) [0xb76a0c6e]
[  1937.746] 10: /usr/bin/X (0xb75a6000+0x3c375) [0xb75e2375]
[  1937.746] 11: /usr/bin/X (0xb75a6000+0x29e95) [0xb75cfe95]
[  1937.746] 12: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0xb7240e46]
[  1937.747] 13: /usr/bin/X (0xb75a6000+0x2a1e9) [0xb75d01e9]
[  1937.747] 
[  1937.747] Bus error at address 0xb5cd1000
[  1937.747] 
Fatal server error:
[  1937.747] Caught signal 7 (Bus error). Server aborting
[  1937.747] 
[  1937.781] 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 


The bug is not easily reproducible. I've installed xserver-xorg-core-dbg
and xserver-xorg-video-intel-dbg in case it will happen again. What else
should I do to catch it if/when it comes next?

Thanks,
Kirill

---- 8< ---- Xorg.log.old
[    26.768] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    26.768] X Protocol Version 11, Revision 0
[    26.768] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    26.768] Current Operating System: Linux vasy 3.2.0-4-686-pae #1 SMP Debian 3.2.32-1 i686
[    26.768] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=UUID=a2d261e7-8bab-451b-9413-eee2bc4fc932 ro quiet
[    26.768] Build Date: 30 September 2012  12:36:23PM
[    26.768] xorg-server 2:1.12.4-1 (Julien Cristau <jcristau@debian.org>) 
[    26.768] Current version of pixman: 0.26.0
[    26.768] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    26.768] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    26.769] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 11 13:37:25 2012
[    26.984] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    27.103] (==) No Layout section.  Using the first Screen section.
[    27.103] (==) No screen section available. Using defaults.
[    27.103] (**) |-->Screen "Default Screen Section" (0)
[    27.103] (**) |   |-->Monitor "<default monitor>"
[    27.131] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    27.131] (==) Automatically adding devices
[    27.131] (==) Automatically enabling devices
[    27.266] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    27.267] 	Entry deleted from font path.
[    27.367] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    27.367] 	Entry deleted from font path.
[    27.367] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    27.367] (==) ModulePath set to "/usr/lib/xorg/modules"
[    27.367] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    27.367] (II) Loader magic: 0xb77905a0
[    27.367] (II) Module ABI versions:
[    27.367] 	X.Org ANSI C Emulation: 0.4
[    27.367] 	X.Org Video Driver: 12.1
[    27.367] 	X.Org XInput driver : 16.0
[    27.367] 	X.Org Server Extension : 6.0
[    27.369] (--) PCI:*(0:0:2:0) 8086:a011:103c:3594 rev 0, Mem @ 0x94180000/524288, 0x80000000/268435456, 0x94000000/1048576, I/O @ 0x000030c0/8
[    27.369] (--) PCI: (0:0:2:1) 8086:a012:103c:3594 rev 0, Mem @ 0x94100000/524288
[    27.369] (II) Open ACPI successful (/var/run/acpid.socket)
[    27.369] (II) LoadModule: "extmod"
[    27.552] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    27.562] (II) Module extmod: vendor="X.Org Foundation"
[    27.562] 	compiled for 1.12.4, module version = 1.0.0
[    27.562] 	Module class: X.Org Server Extension
[    27.562] 	ABI class: X.Org Server Extension, version 6.0
[    27.562] (II) Loading extension SELinux
[    27.562] (II) Loading extension MIT-SCREEN-SAVER
[    27.562] (II) Loading extension XFree86-VidModeExtension
[    27.562] (II) Loading extension XFree86-DGA
[    27.562] (II) Loading extension DPMS
[    27.562] (II) Loading extension XVideo
[    27.562] (II) Loading extension XVideo-MotionCompensation
[    27.562] (II) Loading extension X-Resource
[    27.562] (II) LoadModule: "dbe"
[    27.563] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    27.563] (II) Module dbe: vendor="X.Org Foundation"
[    27.563] 	compiled for 1.12.4, module version = 1.0.0
[    27.563] 	Module class: X.Org Server Extension
[    27.563] 	ABI class: X.Org Server Extension, version 6.0
[    27.564] (II) Loading extension DOUBLE-BUFFER
[    27.564] (II) LoadModule: "glx"
[    27.564] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    27.583] (II) Module glx: vendor="X.Org Foundation"
[    27.583] 	compiled for 1.12.4, module version = 1.0.0
[    27.583] 	ABI class: X.Org Server Extension, version 6.0
[    27.584] (==) AIGLX enabled
[    27.584] (II) Loading extension GLX
[    27.584] (II) LoadModule: "record"
[    27.584] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    27.585] (II) Module record: vendor="X.Org Foundation"
[    27.585] 	compiled for 1.12.4, module version = 1.13.0
[    27.585] 	Module class: X.Org Server Extension
[    27.586] 	ABI class: X.Org Server Extension, version 6.0
[    27.586] (II) Loading extension RECORD
[    27.586] (II) LoadModule: "dri"
[    27.586] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    27.621] (II) Module dri: vendor="X.Org Foundation"
[    27.621] 	compiled for 1.12.4, module version = 1.0.0
[    27.621] 	ABI class: X.Org Server Extension, version 6.0
[    27.621] (II) Loading extension XFree86-DRI
[    27.621] (II) LoadModule: "dri2"
[    27.621] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    27.622] (II) Module dri2: vendor="X.Org Foundation"
[    27.622] 	compiled for 1.12.4, module version = 1.2.0
[    27.622] 	ABI class: X.Org Server Extension, version 6.0
[    27.622] (II) Loading extension DRI2
[    27.622] (==) Matched intel as autoconfigured driver 0
[    27.622] (==) Matched vesa as autoconfigured driver 1
[    27.622] (==) Matched fbdev as autoconfigured driver 2
[    27.622] (==) Assigned the driver to the xf86ConfigLayout
[    27.623] (II) LoadModule: "intel"
[    27.701] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    27.746] (II) Module intel: vendor="X.Org Foundation"
[    27.746] 	compiled for 1.12.3.902, module version = 2.19.0
[    27.746] 	Module class: X.Org Video Driver
[    27.746] 	ABI class: X.Org Video Driver, version 12.1
[    27.746] (II) LoadModule: "vesa"
[    27.757] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    27.761] (II) Module vesa: vendor="X.Org Foundation"
[    27.761] 	compiled for 1.12.1, module version = 2.3.1
[    27.761] 	Module class: X.Org Video Driver
[    27.761] 	ABI class: X.Org Video Driver, version 12.0
[    27.761] (II) LoadModule: "fbdev"
[    27.762] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    27.763] (II) Module fbdev: vendor="X.Org Foundation"
[    27.763] 	compiled for 1.12.1, module version = 0.4.2
[    27.763] 	ABI class: X.Org Video Driver, version 12.0
[    27.763] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2)
[    27.764] (II) VESA: driver for VESA chipsets: vesa
[    27.765] (II) FBDEV: driver for framebuffer: fbdev
[    27.765] (++) using VT number 7

[    27.778] (WW) Falling back to old probe method for vesa
[    27.778] (WW) Falling back to old probe method for fbdev
[    27.778] (II) Loading sub module "fbdevhw"
[    27.778] (II) LoadModule: "fbdevhw"
[    27.778] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    27.877] (II) Module fbdevhw: vendor="X.Org Foundation"
[    27.877] 	compiled for 1.12.4, module version = 0.0.2
[    27.877] 	ABI class: X.Org Video Driver, version 12.1
[    27.878] drmOpenDevice: node name is /dev/dri/card0
[    27.878] drmOpenDevice: open result is 9, (OK)
[    27.878] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    27.878] drmOpenDevice: node name is /dev/dri/card0
[    27.878] drmOpenDevice: open result is 9, (OK)
[    27.878] drmOpenByBusid: drmOpenMinor returns 9
[    27.878] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    27.878] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    27.878] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    27.878] (==) intel(0): RGB weight 888
[    27.878] (==) intel(0): Default visual is TrueColor
[    27.878] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[    27.878] (--) intel(0): Chipset: "Pineview GM"
[    27.878] (**) intel(0): Relaxed fencing enabled
[    27.878] (**) intel(0): Wait on SwapBuffers? enabled
[    27.879] (**) intel(0): Triple buffering? enabled
[    27.879] (**) intel(0): Framebuffer tiled
[    27.879] (**) intel(0): Pixmaps tiled
[    27.879] (**) intel(0): 3D buffers tiled
[    27.917] (**) intel(0): SwapBuffers wait enabled
[    28.648] (==) intel(0): video overlay key set to 0x101fe
[    28.648] (II) intel(0): Output LVDS1 has no monitor section
[    28.649] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    28.680] (II) intel(0): Output VGA1 has no monitor section
[    28.680] (II) intel(0): EDID for output LVDS1
[    28.680] (II) intel(0): Manufacturer: AUO  Model: 31d2  Serial#: 0
[    28.680] (II) intel(0): Year: 2008  Week: 1
[    28.680] (II) intel(0): EDID Version: 1.3
[    28.680] (II) intel(0): Digital Display Input
[    28.680] (II) intel(0): Max Image Size [cm]: horiz.: 22  vert.: 13
[    28.680] (II) intel(0): Gamma: 2.20
[    28.680] (II) intel(0): No DPMS capabilities specified
[    28.680] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    28.680] (II) intel(0): First detailed timing is preferred mode
[    28.681] (II) intel(0): redX: 0.588 redY: 0.351   greenX: 0.342 greenY: 0.567
[    28.681] (II) intel(0): blueX: 0.158 blueY: 0.123   whiteX: 0.313 whiteY: 0.329
[    28.681] (II) intel(0): Manufacturer's mask: 0
[    28.681] (II) intel(0): Supported detailed timing:
[    28.681] (II) intel(0): clock: 54.2 MHz   Image Size:  223 x 125 mm
[    28.681] (II) intel(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1438 h_border: 0
[    28.681] (II) intel(0): v_active: 600  v_sync: 603  v_sync_end 604 v_blanking: 628 v_border: 0
[    28.681] (II) intel(0): Unknown vendor-specific block f
[    28.681] (II) intel(0):  AUO
[    28.681] (II) intel(0):  B101AW03 V1
[    28.681] (II) intel(0): EDID (in hex):
[    28.681] (II) intel(0): 	00ffffffffffff0006afd23100000000
[    28.681] (II) intel(0): 	0112010380160d780ab9a59659579128
[    28.681] (II) intel(0): 	1f505400000001010101010101010101
[    28.681] (II) intel(0): 	0101010101012c15009e41581c201888
[    28.681] (II) intel(0): 	3100df7d000000180000000f00000000
[    28.681] (II) intel(0): 	00000000000000000020000000fe0041
[    28.682] (II) intel(0): 	554f0a202020202020202020000000fe
[    28.682] (II) intel(0): 	004231303141573033205631200a000f
[    28.682] (II) intel(0): EDID vendor "AUO", prod id 12754
[    28.682] (II) intel(0): Printing DDC gathered Modelines:
[    28.682] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[    28.706] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    28.706] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    28.706] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    28.706] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    28.706] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    28.706] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    28.706] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    28.706] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    28.706] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    28.706] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    28.706] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    28.706] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    28.707] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    28.707] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    28.707] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    28.707] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    28.707] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    28.707] (II) intel(0): Printing probed modes for output LVDS1
[    28.707] (II) intel(0): Modeline "1024x600"x60.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[    28.707] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    28.707] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    28.707] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    28.736] (II) intel(0): EDID for output VGA1
[    28.736] (II) intel(0): Output LVDS1 connected
[    28.736] (II) intel(0): Output VGA1 disconnected
[    28.736] (II) intel(0): Using exact sizes for initial modes
[    28.736] (II) intel(0): Output LVDS1 using initial mode 1024x600
[    28.736] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    28.736] (II) intel(0): Kernel page flipping support detected, enabling
[    28.736] (**) intel(0): Display dimensions: (220, 130) mm
[    28.736] (**) intel(0): DPI set to (118, 117)
[    28.736] (II) Loading sub module "fb"
[    28.736] (II) LoadModule: "fb"
[    28.736] (II) Loading /usr/lib/xorg/modules/libfb.so
[    28.843] (II) Module fb: vendor="X.Org Foundation"
[    28.843] 	compiled for 1.12.4, module version = 1.0.0
[    28.843] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    28.843] (II) Loading sub module "dri2"
[    28.843] (II) LoadModule: "dri2"
[    28.844] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    28.844] (II) Module dri2: vendor="X.Org Foundation"
[    28.844] 	compiled for 1.12.4, module version = 1.2.0
[    28.844] 	ABI class: X.Org Server Extension, version 6.0
[    28.844] (II) UnloadModule: "vesa"
[    28.844] (II) Unloading vesa
[    28.844] (II) UnloadModule: "fbdev"
[    28.844] (II) Unloading fbdev
[    28.844] (II) UnloadSubModule: "fbdevhw"
[    28.844] (II) Unloading fbdevhw
[    28.844] (==) Depth 24 pixmap format is 32 bpp
[    28.845] (II) intel(0): [DRI2] Setup complete
[    28.845] (II) intel(0): [DRI2]   DRI driver: i915
[    28.845] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[    28.940] (II) UXA(0): Driver registered support for the following operations:
[    28.940] (II)         solid
[    28.940] (II)         copy
[    28.940] (II)         composite (RENDER acceleration)
[    28.940] (II)         put_image
[    28.940] (II)         get_image
[    28.940] (==) intel(0): Backing store disabled
[    28.940] (==) intel(0): Silken mouse enabled
[    28.940] (II) intel(0): Initializing HW Cursor
[    28.941] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    28.945] (==) intel(0): DPMS enabled
[    28.945] (==) intel(0): Intel XvMC decoder disabled
[    28.945] (II) intel(0): Set up textured video
[    28.945] (II) intel(0): Set up overlay video
[    28.945] (II) intel(0): direct rendering: DRI2 Enabled
[    28.945] (==) intel(0): hotplug detection: "enabled"
[    28.964] (--) RandR disabled
[    28.964] (II) Initializing built-in extension Generic Event Extension
[    28.964] (II) Initializing built-in extension SHAPE
[    28.964] (II) Initializing built-in extension MIT-SHM
[    28.964] (II) Initializing built-in extension XInputExtension
[    28.964] (II) Initializing built-in extension XTEST
[    28.964] (II) Initializing built-in extension BIG-REQUESTS
[    28.964] (II) Initializing built-in extension SYNC
[    28.964] (II) Initializing built-in extension XKEYBOARD
[    28.964] (II) Initializing built-in extension XC-MISC
[    28.964] (II) Initializing built-in extension SECURITY
[    28.964] (II) Initializing built-in extension XINERAMA
[    28.964] (II) Initializing built-in extension XFIXES
[    28.964] (II) Initializing built-in extension RENDER
[    28.964] (II) Initializing built-in extension RANDR
[    28.964] (II) Initializing built-in extension COMPOSITE
[    28.964] (II) Initializing built-in extension DAMAGE
[    28.965] (II) SELinux: Disabled on system
[    30.119] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    30.119] (II) AIGLX: enabled GLX_INTEL_swap_event
[    30.125] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    30.125] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    30.125] (II) AIGLX: Loaded and initialized i915
[    30.125] (II) GLX: Initialized DRI2 GL provider for screen 0
[    30.127] (II) intel(0): Setting screen physical size to 270 x 158
[    33.592] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    33.592] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    33.592] (II) LoadModule: "evdev"
[    33.592] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    33.717] (II) Module evdev: vendor="X.Org Foundation"
[    33.718] 	compiled for 1.12.1, module version = 2.7.0
[    33.718] 	Module class: X.Org XInput Driver
[    33.718] 	ABI class: X.Org XInput driver, version 16.0
[    33.718] (II) Using input driver 'evdev' for 'Power Button'
[    33.718] (**) Power Button: always reports core events
[    33.718] (**) evdev: Power Button: Device: "/dev/input/event3"
[    33.718] (--) evdev: Power Button: Vendor 0 Product 0x1
[    33.718] (--) evdev: Power Button: Found keys
[    33.718] (II) evdev: Power Button: Configuring as keyboard
[    33.718] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    33.718] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    33.718] (**) Option "xkb_rules" "evdev"
[    33.719] (**) Option "xkb_model" "pc105"
[    33.719] (**) Option "xkb_layout" "us,ru"
[    33.719] (**) Option "xkb_variant" ","
[    33.719] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[    34.250] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    34.250] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    34.250] (II) Using input driver 'evdev' for 'Video Bus'
[    34.250] (**) Video Bus: always reports core events
[    34.250] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    34.251] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    34.251] (--) evdev: Video Bus: Found keys
[    34.251] (II) evdev: Video Bus: Configuring as keyboard
[    34.251] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[    34.251] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    34.251] (**) Option "xkb_rules" "evdev"
[    34.251] (**) Option "xkb_model" "pc105"
[    34.251] (**) Option "xkb_layout" "us,ru"
[    34.251] (**) Option "xkb_variant" ","
[    34.251] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[    34.254] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    34.254] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.254] (II) Using input driver 'evdev' for 'Power Button'
[    34.255] (**) Power Button: always reports core events
[    34.255] (**) evdev: Power Button: Device: "/dev/input/event1"
[    34.255] (--) evdev: Power Button: Vendor 0 Product 0x1
[    34.255] (--) evdev: Power Button: Found keys
[    34.255] (II) evdev: Power Button: Configuring as keyboard
[    34.255] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    34.255] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    34.255] (**) Option "xkb_rules" "evdev"
[    34.255] (**) Option "xkb_model" "pc105"
[    34.255] (**) Option "xkb_layout" "us,ru"
[    34.255] (**) Option "xkb_variant" ","
[    34.256] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[    34.257] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    34.257] (II) No input driver specified, ignoring this device.
[    34.257] (II) This device may have been added with another device file.
[    34.258] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    34.258] (II) No input driver specified, ignoring this device.
[    34.258] (II) This device may have been added with another device file.
[    34.259] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[    34.259] (II) No input driver specified, ignoring this device.
[    34.259] (II) This device may have been added with another device file.
[    34.260] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[    34.260] (II) No input driver specified, ignoring this device.
[    34.260] (II) This device may have been added with another device file.
[    34.261] (II) config/udev: Adding input device HP Webcam-50 (/dev/input/event8)
[    34.261] (**) HP Webcam-50: Applying InputClass "evdev keyboard catchall"
[    34.261] (II) Using input driver 'evdev' for 'HP Webcam-50'
[    34.261] (**) HP Webcam-50: always reports core events
[    34.261] (**) evdev: HP Webcam-50: Device: "/dev/input/event8"
[    34.261] (--) evdev: HP Webcam-50: Vendor 0x58f Product 0xa002
[    34.262] (--) evdev: HP Webcam-50: Found keys
[    34.262] (II) evdev: HP Webcam-50: Configuring as keyboard
[    34.262] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8/event8"
[    34.262] (II) XINPUT: Adding extended input device "HP Webcam-50" (type: KEYBOARD, id 9)
[    34.262] (**) Option "xkb_rules" "evdev"
[    34.262] (**) Option "xkb_model" "pc105"
[    34.262] (**) Option "xkb_layout" "us,ru"
[    34.262] (**) Option "xkb_variant" ","
[    34.262] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[    34.264] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    34.264] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    34.264] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    34.264] (**) AT Translated Set 2 keyboard: always reports core events
[    34.264] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    34.264] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    34.264] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    34.264] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    34.264] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    34.264] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    34.264] (**) Option "xkb_rules" "evdev"
[    34.264] (**) Option "xkb_model" "pc105"
[    34.264] (**) Option "xkb_layout" "us,ru"
[    34.264] (**) Option "xkb_variant" ","
[    34.264] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[    34.266] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[    34.266] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    34.266] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    34.266] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    34.266] (II) LoadModule: "synaptics"
[    34.267] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    34.414] (II) Module synaptics: vendor="X.Org Foundation"
[    34.414] 	compiled for 1.12.4, module version = 1.6.2
[    34.414] 	Module class: X.Org XInput Driver
[    34.414] 	ABI class: X.Org XInput driver, version 16.0
[    34.414] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    34.415] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    34.415] (**) Option "Device" "/dev/input/event6"
[    34.424] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    34.424] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[    34.424] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5888
[    34.424] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    34.424] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    34.424] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    34.424] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    34.424] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    34.424] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    34.428] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[    34.428] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    34.428] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    34.428] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    34.428] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.032
[    34.429] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    34.429] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    34.429] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    34.429] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    34.429] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    34.430] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    34.430] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    34.431] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    34.431] (II) No input driver specified, ignoring this device.
[    34.431] (II) This device may have been added with another device file.
[    34.433] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event12)
[    34.433] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[    34.433] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[    34.434] (**) ACPI Virtual Keyboard Device: always reports core events
[    34.434] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event12"
[    34.434] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[    34.434] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[    34.434] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[    34.434] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[    34.434] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 12)
[    34.434] (**) Option "xkb_rules" "evdev"
[    34.434] (**) Option "xkb_model" "pc105"
[    34.434] (**) Option "xkb_layout" "us,ru"
[    34.434] (**) Option "xkb_variant" ","
[    34.434] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[    34.436] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[    34.436] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    34.436] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    34.436] (**) HP WMI hotkeys: always reports core events
[    34.436] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event5"
[    34.436] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    34.437] (--) evdev: HP WMI hotkeys: Found keys
[    34.437] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    34.437] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[    34.437] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[    34.437] (**) Option "xkb_rules" "evdev"
[    34.437] (**) Option "xkb_model" "pc105"
[    34.437] (**) Option "xkb_layout" "us,ru"
[    34.437] (**) Option "xkb_variant" ","
[    34.437] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[    59.455] (II) intel(0): EDID vendor "AUO", prod id 12754
[    59.455] (II) intel(0): Printing DDC gathered Modelines:
[    59.455] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[    59.488] (II) intel(0): EDID vendor "AUO", prod id 12754
[    59.488] (II) intel(0): Printing DDC gathered Modelines:
[    59.488] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[    63.495] (II) intel(0): EDID vendor "AUO", prod id 12754
[    63.496] (II) intel(0): Printing DDC gathered Modelines:
[    63.496] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[    63.593] (II) intel(0): EDID vendor "AUO", prod id 12754
[    63.593] (II) intel(0): Printing DDC gathered Modelines:
[    63.593] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[    63.624] (II) intel(0): EDID vendor "AUO", prod id 12754
[    63.624] (II) intel(0): Printing DDC gathered Modelines:
[    63.624] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  1937.141] 
[  1937.151] Backtrace:
[  1937.745] 0: /usr/bin/X (xorg_backtrace+0x49) [0xb77236d9]
[  1937.745] 1: /usr/bin/X (0xb75a6000+0x1810f6) [0xb77270f6]
[  1937.745] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb758740c]
[  1937.745] 3: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (0xb722a000+0x1134e0) [0xb733d4e0]
[  1937.745] 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb6f39000+0x116dc) [0xb6f4a6dc]
[  1937.745] 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb6f39000+0x134f4) [0xb6f4c4f4]
[  1937.746] 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb6f39000+0xcb846) [0xb7004846]
[  1937.746] 7: /usr/bin/X (CompositeTrapezoids+0xab) [0xb76a07ab]
[  1937.746] 8: /usr/bin/X (0xb75a6000+0xff9a0) [0xb76a59a0]
[  1937.746] 9: /usr/bin/X (0xb75a6000+0xfac6e) [0xb76a0c6e]
[  1937.746] 10: /usr/bin/X (0xb75a6000+0x3c375) [0xb75e2375]
[  1937.746] 11: /usr/bin/X (0xb75a6000+0x29e95) [0xb75cfe95]
[  1937.746] 12: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0xb7240e46]
[  1937.747] 13: /usr/bin/X (0xb75a6000+0x2a1e9) [0xb75d01e9]
[  1937.747] 
[  1937.747] Bus error at address 0xb5cd1000
[  1937.747] 
Fatal server error:
[  1937.747] Caught signal 7 (Bus error). Server aborting
[  1937.747] 
[  1937.781] 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  1937.781] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  1937.782] 
[  1938.201] (II) evdev: Power Button: Close
[  1938.201] (II) UnloadModule: "evdev"
[  1938.237] (II) evdev: Video Bus: Close
[  1938.237] (II) UnloadModule: "evdev"
[  1938.240] (II) evdev: Power Button: Close
[  1938.240] (II) UnloadModule: "evdev"
[  1938.248] (II) evdev: HP Webcam-50: Close
[  1938.248] (II) UnloadModule: "evdev"
[  1938.249] (II) evdev: AT Translated Set 2 keyboard: Close
[  1938.249] (II) UnloadModule: "evdev"
[  1938.312] (II) UnloadModule: "synaptics"
[  1938.316] (II) evdev: ACPI Virtual Keyboard Device: Close
[  1938.316] (II) UnloadModule: "evdev"
[  1938.343] (II) evdev: HP WMI hotkeys: Close
[  1938.343] (II) UnloadModule: "evdev"
[  1938.365] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1938.412] Server terminated with error (1). Closing log file.


----------------------------------------



-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Feb 25  2012 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2027892 Sep 30 16:42 /usr/bin/Xorg

VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller [8086:a011]

/etc/X11/xorg.conf does not exist.

/etc/X11/xorg.conf.d does not exist.

KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
  options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
  options radeon modeset=1

Kernel version (/proc/version):
-------------------------------
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1

Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 32703 Nov 11 14:15 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[  1945.843] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[  1945.867] X Protocol Version 11, Revision 0
[  1945.867] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[  1945.867] Current Operating System: Linux vasy 3.2.0-4-686-pae #1 SMP Debian 3.2.32-1 i686
[  1945.868] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=UUID=a2d261e7-8bab-451b-9413-eee2bc4fc932 ro quiet
[  1945.883] Build Date: 30 September 2012  12:36:23PM
[  1945.883] xorg-server 2:1.12.4-1 (Julien Cristau <jcristau@debian.org>) 
[  1945.883] Current version of pixman: 0.26.0
[  1945.883] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1945.883] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1945.884] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 11 14:09:24 2012
[  1946.009] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1946.065] (==) No Layout section.  Using the first Screen section.
[  1946.065] (==) No screen section available. Using defaults.
[  1946.065] (**) |-->Screen "Default Screen Section" (0)
[  1946.065] (**) |   |-->Monitor "<default monitor>"
[  1946.066] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1946.066] (==) Automatically adding devices
[  1946.066] (==) Automatically enabling devices
[  1946.095] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  1946.095] 	Entry deleted from font path.
[  1946.174] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[  1946.174] 	Entry deleted from font path.
[  1946.174] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[  1946.174] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1946.174] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1946.174] (II) Loader magic: 0xb77505a0
[  1946.174] (II) Module ABI versions:
[  1946.174] 	X.Org ANSI C Emulation: 0.4
[  1946.174] 	X.Org Video Driver: 12.1
[  1946.174] 	X.Org XInput driver : 16.0
[  1946.174] 	X.Org Server Extension : 6.0
[  1946.176] (--) PCI:*(0:0:2:0) 8086:a011:103c:3594 rev 0, Mem @ 0x94180000/524288, 0x80000000/268435456, 0x94000000/1048576, I/O @ 0x000030c0/8
[  1946.177] (--) PCI: (0:0:2:1) 8086:a012:103c:3594 rev 0, Mem @ 0x94100000/524288
[  1946.177] (II) Open ACPI successful (/var/run/acpid.socket)
[  1946.177] (II) LoadModule: "extmod"
[  1946.275] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  1946.277] (II) Module extmod: vendor="X.Org Foundation"
[  1946.277] 	compiled for 1.12.4, module version = 1.0.0
[  1946.277] 	Module class: X.Org Server Extension
[  1946.277] 	ABI class: X.Org Server Extension, version 6.0
[  1946.277] (II) Loading extension SELinux
[  1946.277] (II) Loading extension MIT-SCREEN-SAVER
[  1946.277] (II) Loading extension XFree86-VidModeExtension
[  1946.277] (II) Loading extension XFree86-DGA
[  1946.277] (II) Loading extension DPMS
[  1946.277] (II) Loading extension XVideo
[  1946.277] (II) Loading extension XVideo-MotionCompensation
[  1946.277] (II) Loading extension X-Resource
[  1946.277] (II) LoadModule: "dbe"
[  1946.278] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  1946.295] (II) Module dbe: vendor="X.Org Foundation"
[  1946.295] 	compiled for 1.12.4, module version = 1.0.0
[  1946.295] 	Module class: X.Org Server Extension
[  1946.295] 	ABI class: X.Org Server Extension, version 6.0
[  1946.295] (II) Loading extension DOUBLE-BUFFER
[  1946.295] (II) LoadModule: "glx"
[  1946.296] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1946.297] (II) Module glx: vendor="X.Org Foundation"
[  1946.297] 	compiled for 1.12.4, module version = 1.0.0
[  1946.297] 	ABI class: X.Org Server Extension, version 6.0
[  1946.304] (==) AIGLX enabled
[  1946.305] (II) Loading extension GLX
[  1946.305] (II) LoadModule: "record"
[  1946.305] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  1946.305] (II) Module record: vendor="X.Org Foundation"
[  1946.305] 	compiled for 1.12.4, module version = 1.13.0
[  1946.305] 	Module class: X.Org Server Extension
[  1946.305] 	ABI class: X.Org Server Extension, version 6.0
[  1946.305] (II) Loading extension RECORD
[  1946.306] (II) LoadModule: "dri"
[  1946.306] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  1946.306] (II) Module dri: vendor="X.Org Foundation"
[  1946.306] 	compiled for 1.12.4, module version = 1.0.0
[  1946.306] 	ABI class: X.Org Server Extension, version 6.0
[  1946.307] (II) Loading extension XFree86-DRI
[  1946.307] (II) LoadModule: "dri2"
[  1946.307] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  1946.307] (II) Module dri2: vendor="X.Org Foundation"
[  1946.307] 	compiled for 1.12.4, module version = 1.2.0
[  1946.307] 	ABI class: X.Org Server Extension, version 6.0
[  1946.307] (II) Loading extension DRI2
[  1946.307] (==) Matched intel as autoconfigured driver 0
[  1946.307] (==) Matched vesa as autoconfigured driver 1
[  1946.307] (==) Matched fbdev as autoconfigured driver 2
[  1946.308] (==) Assigned the driver to the xf86ConfigLayout
[  1946.308] (II) LoadModule: "intel"
[  1946.319] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  1946.329] (II) Module intel: vendor="X.Org Foundation"
[  1946.329] 	compiled for 1.12.3.902, module version = 2.19.0
[  1946.329] 	Module class: X.Org Video Driver
[  1946.329] 	ABI class: X.Org Video Driver, version 12.1
[  1946.329] (II) LoadModule: "vesa"
[  1946.330] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  1946.345] (II) Module vesa: vendor="X.Org Foundation"
[  1946.345] 	compiled for 1.12.1, module version = 2.3.1
[  1946.345] 	Module class: X.Org Video Driver
[  1946.346] 	ABI class: X.Org Video Driver, version 12.0
[  1946.346] (II) LoadModule: "fbdev"
[  1946.346] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  1946.347] (II) Module fbdev: vendor="X.Org Foundation"
[  1946.347] 	compiled for 1.12.1, module version = 0.4.2
[  1946.347] 	ABI class: X.Org Video Driver, version 12.0
[  1946.347] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2)
[  1946.349] (II) VESA: driver for VESA chipsets: vesa
[  1946.349] (II) FBDEV: driver for framebuffer: fbdev
[  1946.349] (++) using VT number 7

[  1946.667] (WW) Falling back to old probe method for vesa
[  1946.667] (WW) Falling back to old probe method for fbdev
[  1946.667] (II) Loading sub module "fbdevhw"
[  1946.667] (II) LoadModule: "fbdevhw"
[  1946.668] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  1946.676] (II) Module fbdevhw: vendor="X.Org Foundation"
[  1946.676] 	compiled for 1.12.4, module version = 0.0.2
[  1946.676] 	ABI class: X.Org Video Driver, version 12.1
[  1946.676] drmOpenDevice: node name is /dev/dri/card0
[  1946.676] drmOpenDevice: open result is 9, (OK)
[  1946.676] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[  1946.677] drmOpenDevice: node name is /dev/dri/card0
[  1946.677] drmOpenDevice: open result is 9, (OK)
[  1946.677] drmOpenByBusid: drmOpenMinor returns 9
[  1946.677] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[  1946.677] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1946.677] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  1946.677] (==) intel(0): RGB weight 888
[  1946.677] (==) intel(0): Default visual is TrueColor
[  1946.677] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[  1946.677] (--) intel(0): Chipset: "Pineview GM"
[  1946.683] (**) intel(0): Relaxed fencing enabled
[  1946.683] (**) intel(0): Wait on SwapBuffers? enabled
[  1946.683] (**) intel(0): Triple buffering? enabled
[  1946.683] (**) intel(0): Framebuffer tiled
[  1946.684] (**) intel(0): Pixmaps tiled
[  1946.684] (**) intel(0): 3D buffers tiled
[  1946.684] (**) intel(0): SwapBuffers wait enabled
[  1946.684] (==) intel(0): video overlay key set to 0x101fe
[  1946.684] (II) intel(0): Output LVDS1 has no monitor section
[  1946.684] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[  1946.716] (II) intel(0): Output VGA1 has no monitor section
[  1946.716] (II) intel(0): EDID for output LVDS1
[  1946.716] (II) intel(0): Manufacturer: AUO  Model: 31d2  Serial#: 0
[  1946.716] (II) intel(0): Year: 2008  Week: 1
[  1946.716] (II) intel(0): EDID Version: 1.3
[  1946.716] (II) intel(0): Digital Display Input
[  1946.717] (II) intel(0): Max Image Size [cm]: horiz.: 22  vert.: 13
[  1946.717] (II) intel(0): Gamma: 2.20
[  1946.717] (II) intel(0): No DPMS capabilities specified
[  1946.717] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  1946.717] (II) intel(0): First detailed timing is preferred mode
[  1946.717] (II) intel(0): redX: 0.588 redY: 0.351   greenX: 0.342 greenY: 0.567
[  1946.717] (II) intel(0): blueX: 0.158 blueY: 0.123   whiteX: 0.313 whiteY: 0.329
[  1946.717] (II) intel(0): Manufacturer's mask: 0
[  1946.717] (II) intel(0): Supported detailed timing:
[  1946.717] (II) intel(0): clock: 54.2 MHz   Image Size:  223 x 125 mm
[  1946.717] (II) intel(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1438 h_border: 0
[  1946.717] (II) intel(0): v_active: 600  v_sync: 603  v_sync_end 604 v_blanking: 628 v_border: 0
[  1946.717] (II) intel(0): Unknown vendor-specific block f
[  1946.717] (II) intel(0):  AUO
[  1946.718] (II) intel(0):  B101AW03 V1
[  1946.718] (II) intel(0): EDID (in hex):
[  1946.718] (II) intel(0): 	00ffffffffffff0006afd23100000000
[  1946.718] (II) intel(0): 	0112010380160d780ab9a59659579128
[  1946.718] (II) intel(0): 	1f505400000001010101010101010101
[  1946.718] (II) intel(0): 	0101010101012c15009e41581c201888
[  1946.718] (II) intel(0): 	3100df7d000000180000000f00000000
[  1946.718] (II) intel(0): 	00000000000000000020000000fe0041
[  1946.718] (II) intel(0): 	554f0a202020202020202020000000fe
[  1946.718] (II) intel(0): 	004231303141573033205631200a000f
[  1946.718] (II) intel(0): EDID vendor "AUO", prod id 12754
[  1946.718] (II) intel(0): Printing DDC gathered Modelines:
[  1946.718] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  1946.728] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[  1946.728] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  1946.728] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  1946.728] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[  1946.728] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[  1946.728] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[  1946.728] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[  1946.728] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[  1946.728] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[  1946.729] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[  1946.729] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[  1946.729] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[  1946.729] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[  1946.729] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[  1946.729] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[  1946.729] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[  1946.729] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[  1946.729] (II) intel(0): Printing probed modes for output LVDS1
[  1946.729] (II) intel(0): Modeline "1024x600"x60.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  1946.729] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  1946.729] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  1946.729] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  1946.760] (II) intel(0): EDID for output VGA1
[  1946.760] (II) intel(0): Output LVDS1 connected
[  1946.760] (II) intel(0): Output VGA1 disconnected
[  1946.760] (II) intel(0): Using exact sizes for initial modes
[  1946.760] (II) intel(0): Output LVDS1 using initial mode 1024x600
[  1946.760] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  1946.760] (II) intel(0): Kernel page flipping support detected, enabling
[  1946.760] (**) intel(0): Display dimensions: (220, 130) mm
[  1946.760] (**) intel(0): DPI set to (118, 117)
[  1946.760] (II) Loading sub module "fb"
[  1946.760] (II) LoadModule: "fb"
[  1946.761] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1946.771] (II) Module fb: vendor="X.Org Foundation"
[  1946.771] 	compiled for 1.12.4, module version = 1.0.0
[  1946.771] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1946.771] (II) Loading sub module "dri2"
[  1946.771] (II) LoadModule: "dri2"
[  1946.772] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  1946.772] (II) Module dri2: vendor="X.Org Foundation"
[  1946.772] 	compiled for 1.12.4, module version = 1.2.0
[  1946.772] 	ABI class: X.Org Server Extension, version 6.0
[  1946.772] (II) UnloadModule: "vesa"
[  1946.772] (II) Unloading vesa
[  1946.772] (II) UnloadModule: "fbdev"
[  1946.773] (II) Unloading fbdev
[  1946.773] (II) UnloadSubModule: "fbdevhw"
[  1946.773] (II) Unloading fbdevhw
[  1946.773] (==) Depth 24 pixmap format is 32 bpp
[  1946.781] (II) intel(0): [DRI2] Setup complete
[  1946.781] (II) intel(0): [DRI2]   DRI driver: i915
[  1946.781] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[  1946.781] (II) UXA(0): Driver registered support for the following operations:
[  1946.781] (II)         solid
[  1946.781] (II)         copy
[  1946.781] (II)         composite (RENDER acceleration)
[  1946.781] (II)         put_image
[  1946.781] (II)         get_image
[  1946.782] (==) intel(0): Backing store disabled
[  1946.782] (==) intel(0): Silken mouse enabled
[  1946.782] (II) intel(0): Initializing HW Cursor
[  1946.782] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1946.798] (==) intel(0): DPMS enabled
[  1946.798] (==) intel(0): Intel XvMC decoder disabled
[  1946.798] (II) intel(0): Set up textured video
[  1946.798] (II) intel(0): Set up overlay video
[  1946.799] (II) intel(0): direct rendering: DRI2 Enabled
[  1946.799] (==) intel(0): hotplug detection: "enabled"
[  1946.820] (--) RandR disabled
[  1946.820] (II) Initializing built-in extension Generic Event Extension
[  1946.820] (II) Initializing built-in extension SHAPE
[  1946.820] (II) Initializing built-in extension MIT-SHM
[  1946.820] (II) Initializing built-in extension XInputExtension
[  1946.820] (II) Initializing built-in extension XTEST
[  1946.820] (II) Initializing built-in extension BIG-REQUESTS
[  1946.820] (II) Initializing built-in extension SYNC
[  1946.820] (II) Initializing built-in extension XKEYBOARD
[  1946.820] (II) Initializing built-in extension XC-MISC
[  1946.820] (II) Initializing built-in extension SECURITY
[  1946.820] (II) Initializing built-in extension XINERAMA
[  1946.821] (II) Initializing built-in extension XFIXES
[  1946.821] (II) Initializing built-in extension RENDER
[  1946.821] (II) Initializing built-in extension RANDR
[  1946.821] (II) Initializing built-in extension COMPOSITE
[  1946.821] (II) Initializing built-in extension DAMAGE
[  1946.821] (II) SELinux: Disabled on system
[  1947.135] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  1947.135] (II) AIGLX: enabled GLX_INTEL_swap_event
[  1947.135] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  1947.135] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  1947.135] (II) AIGLX: Loaded and initialized i915
[  1947.135] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1947.137] (II) intel(0): Setting screen physical size to 270 x 158
[  1948.040] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1948.040] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1948.041] (II) LoadModule: "evdev"
[  1948.041] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1948.041] (II) Module evdev: vendor="X.Org Foundation"
[  1948.041] 	compiled for 1.12.1, module version = 2.7.0
[  1948.041] 	Module class: X.Org XInput Driver
[  1948.041] 	ABI class: X.Org XInput driver, version 16.0
[  1948.042] (II) Using input driver 'evdev' for 'Power Button'
[  1948.042] (**) Power Button: always reports core events
[  1948.042] (**) evdev: Power Button: Device: "/dev/input/event3"
[  1948.042] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1948.042] (--) evdev: Power Button: Found keys
[  1948.042] (II) evdev: Power Button: Configuring as keyboard
[  1948.042] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[  1948.042] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1948.042] (**) Option "xkb_rules" "evdev"
[  1948.042] (**) Option "xkb_model" "pc105"
[  1948.043] (**) Option "xkb_layout" "us,ru"
[  1948.043] (**) Option "xkb_variant" ","
[  1948.043] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[  1948.150] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[  1948.150] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1948.150] (II) Using input driver 'evdev' for 'Video Bus'
[  1948.150] (**) Video Bus: always reports core events
[  1948.150] (**) evdev: Video Bus: Device: "/dev/input/event7"
[  1948.150] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  1948.150] (--) evdev: Video Bus: Found keys
[  1948.150] (II) evdev: Video Bus: Configuring as keyboard
[  1948.150] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[  1948.150] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1948.151] (**) Option "xkb_rules" "evdev"
[  1948.151] (**) Option "xkb_model" "pc105"
[  1948.151] (**) Option "xkb_layout" "us,ru"
[  1948.151] (**) Option "xkb_variant" ","
[  1948.151] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[  1948.153] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  1948.153] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1948.153] (II) Using input driver 'evdev' for 'Power Button'
[  1948.153] (**) Power Button: always reports core events
[  1948.153] (**) evdev: Power Button: Device: "/dev/input/event1"
[  1948.153] (--) evdev: Power Button: Vendor 0 Product 0x1
[  1948.153] (--) evdev: Power Button: Found keys
[  1948.153] (II) evdev: Power Button: Configuring as keyboard
[  1948.153] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[  1948.153] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  1948.153] (**) Option "xkb_rules" "evdev"
[  1948.154] (**) Option "xkb_model" "pc105"
[  1948.154] (**) Option "xkb_layout" "us,ru"
[  1948.154] (**) Option "xkb_variant" ","
[  1948.154] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[  1948.155] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[  1948.155] (II) No input driver specified, ignoring this device.
[  1948.155] (II) This device may have been added with another device file.
[  1948.156] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[  1948.156] (II) No input driver specified, ignoring this device.
[  1948.156] (II) This device may have been added with another device file.
[  1948.157] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[  1948.157] (II) No input driver specified, ignoring this device.
[  1948.157] (II) This device may have been added with another device file.
[  1948.158] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[  1948.158] (II) No input driver specified, ignoring this device.
[  1948.158] (II) This device may have been added with another device file.
[  1948.159] (II) config/udev: Adding input device HP Webcam-50 (/dev/input/event8)
[  1948.159] (**) HP Webcam-50: Applying InputClass "evdev keyboard catchall"
[  1948.159] (II) Using input driver 'evdev' for 'HP Webcam-50'
[  1948.159] (**) HP Webcam-50: always reports core events
[  1948.159] (**) evdev: HP Webcam-50: Device: "/dev/input/event8"
[  1948.159] (--) evdev: HP Webcam-50: Vendor 0x58f Product 0xa002
[  1948.159] (--) evdev: HP Webcam-50: Found keys
[  1948.159] (II) evdev: HP Webcam-50: Configuring as keyboard
[  1948.160] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8/event8"
[  1948.160] (II) XINPUT: Adding extended input device "HP Webcam-50" (type: KEYBOARD, id 9)
[  1948.160] (**) Option "xkb_rules" "evdev"
[  1948.160] (**) Option "xkb_model" "pc105"
[  1948.160] (**) Option "xkb_layout" "us,ru"
[  1948.160] (**) Option "xkb_variant" ","
[  1948.160] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[  1948.162] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1948.162] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1948.162] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  1948.162] (**) AT Translated Set 2 keyboard: always reports core events
[  1948.162] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  1948.162] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  1948.162] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  1948.162] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  1948.162] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1948.162] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[  1948.162] (**) Option "xkb_rules" "evdev"
[  1948.162] (**) Option "xkb_model" "pc105"
[  1948.162] (**) Option "xkb_layout" "us,ru"
[  1948.162] (**) Option "xkb_variant" ","
[  1948.162] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[  1948.164] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[  1948.164] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  1948.164] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  1948.164] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[  1948.164] (II) LoadModule: "synaptics"
[  1948.165] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  1948.176] (II) Module synaptics: vendor="X.Org Foundation"
[  1948.176] 	compiled for 1.12.4, module version = 1.6.2
[  1948.176] 	Module class: X.Org XInput Driver
[  1948.176] 	ABI class: X.Org XInput driver, version 16.0
[  1948.176] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  1948.176] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1948.176] (**) Option "Device" "/dev/input/event6"
[  1948.200] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[  1948.200] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[  1948.200] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5888
[  1948.200] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  1948.200] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  1948.200] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[  1948.200] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[  1948.201] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1948.201] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  1948.201] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[  1948.201] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[  1948.201] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  1948.201] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[  1948.202] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.032
[  1948.202] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  1948.202] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  1948.202] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  1948.203] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  1948.203] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1948.204] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[  1948.204] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[  1948.205] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[  1948.206] (II) No input driver specified, ignoring this device.
[  1948.206] (II) This device may have been added with another device file.
[  1948.208] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event12)
[  1948.208] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[  1948.209] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[  1948.209] (**) ACPI Virtual Keyboard Device: always reports core events
[  1948.209] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event12"
[  1948.209] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[  1948.209] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[  1948.209] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[  1948.209] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[  1948.209] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 12)
[  1948.209] (**) Option "xkb_rules" "evdev"
[  1948.209] (**) Option "xkb_model" "pc105"
[  1948.209] (**) Option "xkb_layout" "us,ru"
[  1948.210] (**) Option "xkb_variant" ","
[  1948.210] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[  1948.212] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[  1948.212] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  1948.212] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[  1948.212] (**) HP WMI hotkeys: always reports core events
[  1948.212] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event5"
[  1948.212] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[  1948.212] (--) evdev: HP WMI hotkeys: Found keys
[  1948.212] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[  1948.213] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[  1948.213] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[  1948.213] (**) Option "xkb_rules" "evdev"
[  1948.213] (**) Option "xkb_model" "pc105"
[  1948.213] (**) Option "xkb_layout" "us,ru"
[  1948.213] (**) Option "xkb_variant" ","
[  1948.213] (**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll"
[  1958.288] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2018.064] (II) Open ACPI successful (/var/run/acpid.socket)
[  2018.065] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2018.072] (II) intel(0): EDID vendor "AUO", prod id 12754
[  2018.072] (II) intel(0): Printing DDC gathered Modelines:
[  2018.072] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  2018.106] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  2022.564] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2132.073] (II) Open ACPI successful (/var/run/acpid.socket)
[  2132.073] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2132.088] (II) intel(0): EDID vendor "AUO", prod id 12754
[  2132.088] (II) intel(0): Printing DDC gathered Modelines:
[  2132.088] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  2132.121] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  2146.692] (II) intel(0): EDID vendor "AUO", prod id 12754
[  2146.692] (II) intel(0): Printing DDC gathered Modelines:
[  2146.692] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  2146.724] (II) intel(0): EDID vendor "AUO", prod id 12754
[  2146.724] (II) intel(0): Printing DDC gathered Modelines:
[  2146.724] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  2149.239] (II) intel(0): EDID vendor "AUO", prod id 12754
[  2149.239] (II) intel(0): Printing DDC gathered Modelines:
[  2149.239] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  2149.279] (II) intel(0): EDID vendor "AUO", prod id 12754
[  2149.279] (II) intel(0): Printing DDC gathered Modelines:
[  2149.279] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  2149.312] (II) intel(0): EDID vendor "AUO", prod id 12754
[  2149.312] (II) intel(0): Printing DDC gathered Modelines:
[  2149.312] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  2169.744] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2179.502] (II) Open ACPI successful (/var/run/acpid.socket)
[  2179.502] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2179.524] (II) intel(0): EDID vendor "AUO", prod id 12754
[  2179.524] (II) intel(0): Printing DDC gathered Modelines:
[  2179.524] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  2179.570] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  2224.960] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2293.936] (II) Open ACPI successful (/var/run/acpid.socket)
[  2293.937] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2293.952] (II) intel(0): EDID vendor "AUO", prod id 12754
[  2293.952] (II) intel(0): Printing DDC gathered Modelines:
[  2293.952] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  2293.995] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  2328.432] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2337.799] (II) Open ACPI successful (/var/run/acpid.socket)
[  2337.799] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2337.808] (II) intel(0): EDID vendor "AUO", prod id 12754
[  2337.808] (II) intel(0): Printing DDC gathered Modelines:
[  2337.808] (II) intel(0): Modeline "1024x600"x0.0   54.20  1024 1048 1184 1438  600 603 604 628 -hsync -vsync (37.7 kHz eP)
[  2337.856] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found

udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=6651359

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
N: input/event3
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
E: DMI_VENDOR=Hewlett-Packard
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=7377836
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll
E: XKBVARIANT=,

P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b 0 0 0 0 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=9702697

P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7
N: input/event7
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7
E: DMI_VENDOR=Hewlett-Packard
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=9718937
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll
E: XKBVARIANT=,

P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=100000 0 0 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=6648861

P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1
N: input/event1
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1
E: DMI_VENDOR=Hewlett-Packard
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=7376860
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll
E: XKBVARIANT=,

P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
E: EV=21
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: PRODUCT=19/0/5/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=1
E: UDEV_LOG=3
E: USEC_INITIALIZED=6651162

P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2/event2
N: input/event2
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2/event2
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=6895606

P: /devices/pci0000:00/0000:00:1b.0/input/input9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input9
E: EV=40001
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0001v111Dp7605e0001-e0,12,kramls1,2,fw
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: PRODUCT=1/111d/7605/1
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=10044668

P: /devices/pci0000:00/0000:00:1b.0/input/input9/event9
N: input/event9
E: DEVNAME=/dev/input/event9
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input9/event9
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=10060053

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw4,
E: NAME="HDA Intel Mic"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=10
E: UDEV_LOG=3
E: USEC_INITIALIZED=10045933

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event10
N: input/event10
E: DEVNAME=/dev/input/event10
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event10
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=74
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=10060788

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
E: EV=21
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MODALIAS=input:b0000v0000p0000e0000-e0,5,kramlsfw2,
E: NAME="HDA Intel Headphone"
E: PHYS="ALSA"
E: PRODUCT=0/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=4
E: UDEV_LOG=3
E: USEC_INITIALIZED=10048101

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
N: input/event11
E: DEVNAME=/dev/input/event11
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: MAJOR=13
E: MINOR=75
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=10062417

P: /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8
E: EV=3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=HP_Webcam-50
E: ID_MODEL_ENC=HP\x20Webcam-50
E: ID_MODEL_ID=a002
E: ID_PATH=pci-0000:00:1d.7-usb-0:4:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_4_1_0
E: ID_REVISION=0002
E: ID_SERIAL=DC03001LO1D73Y_HP_Webcam-50
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=DC03001LO1D73Y
E: ID_VENDOR_ENC=DC03001LO1D73Y
E: ID_VENDOR_ID=058f
E: KEY=100000 0 0 0 0 0 0
E: MODALIAS=input:b0003v058FpA002e0002-e0,1,kD4,ramlsfw
E: NAME="HP Webcam-50"
E: PHYS="usb-0000:00:1d.7-4/button"
E: PRODUCT=3/58f/a002/2
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=9830665

P: /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8/event8
N: input/event8
S: input/by-id/usb-DC03001LO1D73Y_HP_Webcam-50-event-if00
S: input/by-path/pci-0000:00:1d.7-usb-0:4:1.0-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-DC03001LO1D73Y_HP_Webcam-50-event-if00 /dev/input/by-path/pci-0000:00:1d.7-usb-0:4:1.0-event
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8/event8
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_MODEL=HP_Webcam-50
E: ID_MODEL_ENC=HP\x20Webcam-50
E: ID_MODEL_ID=a002
E: ID_PATH=pci-0000:00:1d.7-usb-0:4:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_4_1_0
E: ID_REVISION=0002
E: ID_SERIAL=DC03001LO1D73Y_HP_Webcam-50
E: ID_TYPE=video
E: ID_USB_DRIVER=uvcvideo
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=DC03001LO1D73Y
E: ID_VENDOR_ENC=DC03001LO1D73Y
E: ID_VENDOR_ID=058f
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=9848867
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll
E: XKBVARIANT=,

P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=20000 0 20 0 0 0 0 500f 2100002 3803078 f900d401 feffffdf ffefffff ffffffff fffffffe
E: LED=7
E: MODALIAS=input:b0011v0001p0001eAB83-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8E,8F,98,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,C1,D4,D9,E0,E1,E2,E3,EC,EE,185,1D1,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab83
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=6560340

P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: DMI_VENDOR=Hewlett-Packard
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=7377984
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll
E: XKBVARIANT=,

P: /devices/platform/i8042/serio1/input/input6
E: ABS=2608000 11000003
E: DEVPATH=/devices/platform/i8042/serio1/input/input6
E: EV=b
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: KEY=6420 0 30000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0011v0002p0007e01B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,2F,35,36,39,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio1/input0"
E: PRODUCT=11/2/7/1b1
E: PROP=9
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=8415599

P: /devices/platform/i8042/serio1/input/input6/event6
N: input/event6
S: input/by-path/platform-i8042-serio-1-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event6
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=8638565

P: /devices/platform/i8042/serio1/input/input6/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-1
E: ID_PATH_TAG=platform-i8042-serio-1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=8638417

P: /devices/platform/pcspkr/input/input4
E: DEVPATH=/devices/platform/pcspkr/input/input4
E: EV=40001
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=6690590

P: /devices/platform/pcspkr/input/input4/event4
N: input/event4
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/platform/pcspkr/input/input4/event4
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=6902457

P: /devices/virtual/input/input12
E: DEVPATH=/devices/virtual/input/input12
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: KEY=ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff fffffffe
E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw
E: NAME="ACPI Virtual Keyboard Device"
E: PRODUCT=3/0/0/4
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=21501147

P: /devices/virtual/input/input12/event12
N: input/event12
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event12
E: DEVPATH=/devices/virtual/input/input12/event12
E: DMI_VENDOR=Hewlett-Packard
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=76
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=21510333
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll
E: XKBVARIANT=,

P: /devices/virtual/input/input5
E: DEVPATH=/devices/virtual/input/input5
E: EV=33
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: KEY=40 0 0 0 10007 0 0 2100400 0 0 0 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,5,k8A,94,99,E0,E1,E2,F0,166,ram4,lsfw1,5,
E: MSC=10
E: NAME="HP WMI hotkeys"
E: PHYS="wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: SW=22
E: UDEV_LOG=3
E: USEC_INITIALIZED=7954288

P: /devices/virtual/input/input5/event5
N: input/event5
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/virtual/input/input5/event5
E: DMI_VENDOR=Hewlett-Packard
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=7967435
E: XKBLAYOUT=us,ru
E: XKBMODEL=pc105
E: XKBOPTIONS=grp:alt_shift_toggle,lv3:ralt_switch,compose:lwin,grp_led:scroll
E: XKBVARIANT=,


DRM Information from dmesg:
---------------------------
[    0.856706] Linux agpgart interface v0.103
[    0.856954] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    0.857163] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    0.857423] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.857691] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    7.844589] [drm] Initialized drm 1.1.0 20060810
[    8.929798] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    8.929804] [drm] Driver supports precise vblank timestamp query.
[    9.276416] [drm] initialized overlay support
[    9.297606] fbcon: inteldrmfb (fb0) is primary device
[    9.682009] fb0: inteldrmfb frame buffer device
[    9.682014] drm: registered panic notifier
[    9.700361] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-4-686-pae (SMP w/2 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages xserver-xorg-video-intel depends on:
ii  libc6                                  2.13-35
ii  libdrm-intel1                          2.4.33-3
ii  libdrm2                                2.4.33-3
ii  libpciaccess0                          0.13.1-2
ii  libudev0                               175-7
ii  libx11-6                               2:1.5.0-1
ii  libx11-xcb1                            2:1.5.0-1
ii  libxcb-dri2-0                          1.8.1-2
ii  libxcb-util0                           0.3.8-2
ii  libxcb1                                1.8.1-2
ii  libxext6                               2:1.3.1-2
ii  libxfixes3                             1:5.0-4
ii  libxv1                                 2:1.0.7-1
ii  libxvmc1                               2:1.0.7-1
ii  xserver-xorg-core [xorg-video-abi-12]  2:1.12.4-1

xserver-xorg-video-intel recommends no packages.

xserver-xorg-video-intel suggests no packages.

-- no debconf information


Reply to: