[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#667459: Update



Michel Dänzer @ 09/11/12 10:03:
On Fre, 2012-11-09 at 09:12 +0100, Meike Reichle wrote:

I am using a standard Debian kernel (linux-image-3.2.0-4-686-pae) but
apparently no KMS, I suppose my graphics card (Mobility Radeon HD 3200)
does not support it.

Not sure why it wouldn't, please provide your dmesg output.

I've attached it to this mail.

Regards,
Meike

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-12) ) #1 SMP Debian 3.2.32-1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000006fed0000 (usable)
[    0.000000]  BIOS-e820: 000000006fed0000 - 000000006fedc000 (ACPI data)
[    0.000000]  BIOS-e820: 000000006fedc000 - 000000006fede000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006fede000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: LENOVO 287655G/287655G, BIOS 6XET44WW (1.27 ) 07/21/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x6fed0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f7df0] f7df0
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[    0.000000] RAMDISK: 368f2000 - 37471000
[    0.000000] ACPI: RSDP 000f7ac0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 6fed1e2b 0005C (v01 LENOVO TP-6X    00001270  LTP 00000000)
[    0.000000] ACPI: FACP 6fedbb59 000F4 (v03 LENOVO TP-6X    00001270 ATI  000F4240)
[    0.000000] ACPI: DSDT 6fed1e87 09CD2 (v01 LENOVO TP-6X    00001270 MSFT 03000001)
[    0.000000] ACPI: FACS 6feddfc0 00040
[    0.000000] ACPI: TCPA 6fedbcc1 00032 (v02 LENOVO TP-6X    00001270 PTEC 00000000)
[    0.000000] ACPI: SSDT 6fedbcf3 000D3 (v01 LENOVO TP-6X    00001270 AMD  00000001)
[    0.000000] ACPI: APIC 6fedbdc6 00050 (v01 LENOVO TP-6X    00001270  LTP 00000000)
[    0.000000] ACPI: MCFG 6fedbe16 0003C (v01 LENOVO TP-6X    00001270  LTP 00000000)
[    0.000000] ACPI: HPET 6fedbe52 00038 (v01 LENOVO TP-6X    00001270  LTP 00000001)
[    0.000000] ACPI: SLIC 6fedbe8a 00176 (v01 LENOVO TP-6X    00001270  LTP 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 900MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x0006fed0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0006fed0
[    0.000000] On node 0 totalpages: 458333
[    0.000000] free_area_init_node: node 0, pgdat c140fec0, node_mem_map f5af2200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1802 pages used for memmap
[    0.000000]   HighMem zone: 228808 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f79e6000 s33280 r0 d24064 u57344
[    0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 454751
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=/dev/mapper/jet-root ro processor.max_cstate=2 quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0006fed0)
[    0.000000] Memory: 1801112k/1833792k available (2843k kernel code, 32220k reserved, 1346k data, 416k init, 922440k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc1418000 - 0xc1480000   ( 416 kB)
[    0.000000]       .data : 0xc12c6d84 - 0xc14177c0   (1346 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12c6d84   (2843 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1595.940 MHz processor.
[    0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.88 BogoMIPS (lpj=6383760)
[    0.008010] pid_max: default: 32768 minimum: 301
[    0.008061] Security Framework initialized
[    0.008069] AppArmor: AppArmor disabled by boot time parameter
[    0.008089] Mount-cache hash table entries: 512
[    0.008269] Initializing cgroup subsys cpuacct
[    0.008277] Initializing cgroup subsys memory
[    0.008291] Initializing cgroup subsys devices
[    0.008295] Initializing cgroup subsys freezer
[    0.008298] Initializing cgroup subsys net_cls
[    0.008302] Initializing cgroup subsys blkio
[    0.008313] Initializing cgroup subsys perf_event
[    0.008352] mce: CPU supports 5 MCE banks
[    0.008366] using AMD E400 aware idle routine
[    0.008444] SMP alternatives: switching to UP code
[    0.011612] Freeing SMP alternatives: 8k freed
[    0.011621] ACPI: Core revision 20110623
[    0.020099] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020622] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.060774] CPU0: AMD Athlon(tm) Neo Processor MV-40 stepping 02
[    0.064003] Performance Events: AMD PMU driver.
[    0.064003] ... version:                0
[    0.064003] ... bit width:              48
[    0.064003] ... generic registers:      4
[    0.064003] ... value mask:             0000ffffffffffff
[    0.064003] ... max period:             00007fffffffffff
[    0.064003] ... fixed-purpose events:   0
[    0.064003] ... event mask:             000000000000000f
[    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.064003] Brought up 1 CPUs
[    0.064003] Total of 1 processors activated (3191.88 BogoMIPS).
[    0.064003] devtmpfs: initialized
[    0.064003] PM: Registering ACPI NVS region at 6fedc000 (8192 bytes)
[    0.064003] print_constraints: dummy: 
[    0.064003] NET: Registered protocol family 16
[    0.064003] node 0 link 0: io port [1000, ffff]
[    0.064003] TOM: 0000000080000000 aka 2048M
[    0.064003] node 0 link 0: mmio [a0000, bffff]
[    0.064003] node 0 link 0: mmio [80000000, bfffffff]
[    0.064003] node 0 link 0: mmio [c0000000, cfffffff]
[    0.064003] node 0 link 0: mmio [d0000000, d00fffff]
[    0.064003] node 0 link 0: mmio [d0100000, d02fffff]
[    0.064003] node 0 link 0: mmio [d0300000, dfffffff]
[    0.064003] node 0 link 0: mmio [e0000000, efffffff]
[    0.064003] node 0 link 0: mmio [f0000000, ffffffff]
[    0.064003] bus: [00, ff] on node 0 link 0
[    0.064003] bus: 00 index 0 [io  0x0000-0xffff]
[    0.064003] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.064003] bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
[    0.064003] ACPI: bus type pci registered
[    0.064003] PCI: MMCONFIG for domain 0000 [bus 00-03] at [mem 0xe0000000-0xe03fffff] (base 0xe0000000)
[    0.064003] PCI: MMCONFIG at [mem 0xe0000000-0xe03fffff] reserved in E820
[    0.064003] PCI: Using MMCONFIG for extended config space
[    0.064003] PCI: Using configuration type 1 for base access
[    0.064003] bio: create slab <bio-0> at 0
[    0.064003] ACPI: Added _OSI(Module Device)
[    0.064003] ACPI: Added _OSI(Processor Device)
[    0.064003] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.064003] ACPI: Added _OSI(Processor Aggregator Device)
[    0.064426] ACPI: EC: Look up EC in DSDT
[    0.068891] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.072150] ACPI: Interpreter enabled
[    0.072157] ACPI: (supports S0 S3 S4 S5)
[    0.072186] ACPI: Using IOAPIC for interrupt routing
[    0.085686] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.092434] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.092727] ACPI: No dock devices found.
[    0.092729] HEST: Table not found.
[    0.092735] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.096293] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.098314] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.098319] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff]
[    0.098323] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff]
[    0.098327] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff]
[    0.098331] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff]
[    0.098335] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff]
[    0.098339] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff]
[    0.098344] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff]
[    0.098348] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff]
[    0.098352] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff]
[    0.098356] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[    0.098361] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.098365] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.098392] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[    0.098472] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
[    0.098597] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[    0.098653] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.098680] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[    0.098738] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.098849] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.098874] pci 0000:00:11.0: reg 10: [io  0x8420-0x8427]
[    0.098887] pci 0000:00:11.0: reg 14: [io  0x8414-0x8417]
[    0.098900] pci 0000:00:11.0: reg 18: [io  0x8418-0x841f]
[    0.098913] pci 0000:00:11.0: reg 1c: [io  0x8410-0x8413]
[    0.098926] pci 0000:00:11.0: reg 20: [io  0x8400-0x840f]
[    0.098939] pci 0000:00:11.0: reg 24: [mem 0xd0607000-0xd06073ff]
[    0.099013] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.099030] pci 0000:00:12.0: reg 10: [mem 0xd0604000-0xd0604fff]
[    0.099113] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[    0.099130] pci 0000:00:12.1: reg 10: [mem 0xd0605000-0xd0605fff]
[    0.099220] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.099244] pci 0000:00:12.2: reg 10: [mem 0xd0607400-0xd06074ff]
[    0.099346] pci 0000:00:12.2: supports D1 D2
[    0.099349] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.099381] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.099398] pci 0000:00:13.0: reg 10: [mem 0xd0606000-0xd0606fff]
[    0.099489] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.099514] pci 0000:00:13.2: reg 10: [mem 0xd0607800-0xd06078ff]
[    0.099615] pci 0000:00:13.2: supports D1 D2
[    0.099618] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.099654] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.099781] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.099809] pci 0000:00:14.2: reg 10: [mem 0xd0600000-0xd0603fff 64bit]
[    0.099890] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.099912] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.100021] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.100081] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.100108] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.100130] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.100152] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.100219] pci 0000:01:05.0: [1002:9612] type 0 class 0x000300
[    0.100232] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[    0.100240] pci 0000:01:05.0: reg 14: [io  0x9000-0x90ff]
[    0.100248] pci 0000:01:05.0: reg 18: [mem 0xd0200000-0xd020ffff]
[    0.100264] pci 0000:01:05.0: reg 24: [mem 0xd0100000-0xd01fffff]
[    0.100291] pci 0000:01:05.0: supports D1 D2
[    0.100403] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.100409] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.100414] pci 0000:00:01.0:   bridge window [mem 0xd0100000-0xd02fffff]
[    0.100421] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.100513] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[    0.100535] pci 0000:02:00.0: reg 10: [io  0xa000-0xa0ff]
[    0.100566] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.100589] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.100607] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.100670] pci 0000:02:00.0: supports D1 D2
[    0.100674] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.108058] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[    0.108064] pci 0000:00:05.0:   bridge window [io  0xa000-0xafff]
[    0.108072] pci 0000:00:05.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.108203] pci 0000:03:00.0: [10ec:8172] type 0 class 0x000280
[    0.108269] pci 0000:03:00.0: reg 10: [io  0xb000-0xb0ff]
[    0.108330] pci 0000:03:00.0: reg 14: [mem 0xd0300000-0xd0303fff]
[    0.108475] pci 0000:03:00.0: supports D1 D2
[    0.108478] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[    0.116093] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[    0.116099] pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
[    0.116104] pci 0000:00:06.0:   bridge window [mem 0xd0300000-0xd03fffff]
[    0.116215] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[    0.116227] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.116232] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
[    0.116236] pci 0000:00:14.4:   bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
[    0.116241] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
[    0.116245] pci 0000:00:14.4:   bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
[    0.116250] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
[    0.116254] pci 0000:00:14.4:   bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
[    0.116259] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
[    0.116263] pci 0000:00:14.4:   bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
[    0.116268] pci 0000:00:14.4:   bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
[    0.116272] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[    0.116277] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.116281] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.116365] pci_bus 0000:00: on NUMA node 0
[    0.116370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.116583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[    0.116681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.116817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.117108]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.117826]  pci0000:00: ACPI _OSC control (0x1c) granted
[    0.122205] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[    0.122265] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[    0.122322] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[    0.122379] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[    0.122436] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[    0.122493] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[    0.122550] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.122607] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[    0.122767] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.122772] vgaarb: loaded
[    0.122774] vgaarb: bridge control possible 0000:01:05.0
[    0.122844] PCI: Using ACPI for IRQ routing
[    0.122848] PCI: pci_cache_line_size set to 64 bytes
[    0.123133] reserve RAM buffer: 000000000009dc00 - 000000000009ffff 
[    0.123137] reserve RAM buffer: 000000006fed0000 - 000000006fffffff 
[    0.123351] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.123358] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.125045] Switching to clocksource hpet
[    0.127317] pnp: PnP ACPI init
[    0.127345] ACPI: bus type pnp registered
[    0.127421] pnp 00:00: [bus 00-ff]
[    0.127426] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.127430] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[    0.127433] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[    0.127439] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[    0.127443] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[    0.127447] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[    0.127451] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[    0.127455] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[    0.127458] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[    0.127462] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[    0.127466] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[    0.127469] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[    0.127473] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[    0.127477] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[    0.127480] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[    0.127484] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[    0.127488] pnp 00:00: [mem 0x000de000-0x000dffff window]
[    0.127491] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[    0.127495] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[    0.127499] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[    0.127502] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[    0.127506] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[    0.127510] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[    0.127513] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[    0.127517] pnp 00:00: [mem 0x000ee000-0x000effff window]
[    0.127521] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[    0.127525] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[    0.127529] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.127532] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.127536] pnp 00:00: [io  0x0d00-0xffff window]
[    0.127613] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.127685] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.127688] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.127761] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.127766] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.127771] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.128384] pnp 00:02: [io  0x0000-0x001f]
[    0.128388] pnp 00:02: [io  0x0080-0x008f]
[    0.128391] pnp 00:02: [io  0x00c0-0x00df]
[    0.128394] pnp 00:02: [dma 4]
[    0.128443] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.128456] pnp 00:03: [io  0x00f0-0x00fe]
[    0.128535] pnp 00:03: [irq 13]
[    0.128579] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.128594] pnp 00:04: [io  0x0070-0x0071]
[    0.128665] pnp 00:04: [irq 8]
[    0.128712] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.128725] pnp 00:05: [io  0x0061]
[    0.128770] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.128786] pnp 00:06: [io  0x0060]
[    0.128789] pnp 00:06: [io  0x0064]
[    0.128860] pnp 00:06: [irq 1]
[    0.128907] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.128987] pnp 00:07: [irq 12]
[    0.129035] pnp 00:07: Plug and Play ACPI device, IDs LEN0017 PNP0f13 (active)
[    0.129056] pnp 00:08: [io  0x0022-0x0023]
[    0.129060] pnp 00:08: [io  0x002e-0x002f]
[    0.129063] pnp 00:08: [io  0x0068]
[    0.129066] pnp 00:08: [io  0x006c]
[    0.129069] pnp 00:08: [io  0x0072-0x0073]
[    0.129072] pnp 00:08: [io  0x0080-0x0081]
[    0.129075] pnp 00:08: [io  0x00b0-0x00b1]
[    0.129078] pnp 00:08: [io  0x00b8]
[    0.129081] pnp 00:08: [io  0x0092]
[    0.129084] pnp 00:08: [io  0x0220-0x022f]
[    0.129087] pnp 00:08: [io  0x040b]
[    0.129090] pnp 00:08: [io  0x04d0-0x04d1]
[    0.129093] pnp 00:08: [io  0x04d6]
[    0.129096] pnp 00:08: [io  0x0530-0x0537]
[    0.129100] pnp 00:08: [io  0x0700-0x070f]
[    0.129104] pnp 00:08: [io  0x0c00-0x0c01]
[    0.129108] pnp 00:08: [io  0x0c14]
[    0.129111] pnp 00:08: [io  0x0c50-0x0c52]
[    0.129114] pnp 00:08: [io  0x0c6c]
[    0.129117] pnp 00:08: [io  0x0c6f]
[    0.129120] pnp 00:08: [io  0x0cd0-0x0cd1]
[    0.129123] pnp 00:08: [io  0x0cd2-0x0cd3]
[    0.129126] pnp 00:08: [io  0x0cd4-0x0cd5]
[    0.129130] pnp 00:08: [io  0x0cd6-0x0cd7]
[    0.129133] pnp 00:08: [io  0x0cd8-0x0cdf]
[    0.129136] pnp 00:08: [io  0x8000-0x805f]
[    0.129140] pnp 00:08: [io  0x8100-0x81ff window]
[    0.129143] pnp 00:08: [io  0x8200-0x82ff window]
[    0.129147] pnp 00:08: [io  0x0f40-0x0f47]
[    0.129150] pnp 00:08: [io  0x087f]
[    0.129247] system 00:08: [io  0x0220-0x022f] has been reserved
[    0.129252] system 00:08: [io  0x040b] has been reserved
[    0.129256] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.129260] system 00:08: [io  0x04d6] has been reserved
[    0.129264] system 00:08: [io  0x0530-0x0537] has been reserved
[    0.129268] system 00:08: [io  0x0700-0x070f] has been reserved
[    0.129273] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.129277] system 00:08: [io  0x0c14] has been reserved
[    0.129281] system 00:08: [io  0x0c50-0x0c52] has been reserved
[    0.129285] system 00:08: [io  0x0c6c] has been reserved
[    0.129290] system 00:08: [io  0x0c6f] has been reserved
[    0.129294] system 00:08: [io  0x0cd0-0x0cd1] has been reserved
[    0.129298] system 00:08: [io  0x0cd2-0x0cd3] has been reserved
[    0.129302] system 00:08: [io  0x0cd4-0x0cd5] has been reserved
[    0.129307] system 00:08: [io  0x0cd6-0x0cd7] has been reserved
[    0.129311] system 00:08: [io  0x0cd8-0x0cdf] has been reserved
[    0.129316] system 00:08: [io  0x8000-0x805f] has been reserved
[    0.129320] system 00:08: [io  0x8100-0x81ff window] has been reserved
[    0.129325] system 00:08: [io  0x8200-0x82ff window] has been reserved
[    0.129329] system 00:08: [io  0x0f40-0x0f47] has been reserved
[    0.129333] system 00:08: [io  0x087f] has been reserved
[    0.129338] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.129488] pnp 00:09: [mem 0x000e0000-0x000fffff]
[    0.129492] pnp 00:09: [mem 0xfff00000-0xffffffff]
[    0.129495] pnp 00:09: [mem 0xffc00000-0xffefffff]
[    0.129499] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.129503] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[    0.129579] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.129584] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[    0.129589] system 00:09: [mem 0xffc00000-0xffefffff] has been reserved
[    0.129594] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.129598] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.129785] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[    0.129835] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.130250] pnp: PnP ACPI: found 11 devices
[    0.130253] ACPI: ACPI bus type pnp unregistered
[    0.130257] PnPBIOS: Disabled by ACPI PNP
[    0.168153] PCI: max bus depth: 1 pci_try_num: 2
[    0.168192] pci 0000:00:05.0: BAR 14: assigned [mem 0x80000000-0x800fffff]
[    0.168198] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.168202] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.168207] pci 0000:00:01.0:   bridge window [mem 0xd0100000-0xd02fffff]
[    0.168213] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.168220] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref]
[    0.168225] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[    0.168229] pci 0000:00:05.0:   bridge window [io  0xa000-0xafff]
[    0.168235] pci 0000:00:05.0:   bridge window [mem 0x80000000-0x800fffff]
[    0.168240] pci 0000:00:05.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.168246] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[    0.168251] pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
[    0.168256] pci 0000:00:06.0:   bridge window [mem 0xd0300000-0xd03fffff]
[    0.168263] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[    0.168364] pci 0000:00:05.0: setting latency timer to 64
[    0.168375] pci 0000:00:06.0: setting latency timer to 64
[    0.168386] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[    0.168389] pci_bus 0000:00: resource 5 [mem 0x000d0000-0x000d1fff]
[    0.168393] pci_bus 0000:00: resource 6 [mem 0x000d2000-0x000d3fff]
[    0.168397] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d5fff]
[    0.168401] pci_bus 0000:00: resource 8 [mem 0x000d6000-0x000d7fff]
[    0.168405] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000d9fff]
[    0.168409] pci_bus 0000:00: resource 10 [mem 0x000da000-0x000dbfff]
[    0.168413] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000ddfff]
[    0.168416] pci_bus 0000:00: resource 12 [mem 0x000de000-0x000dffff]
[    0.168420] pci_bus 0000:00: resource 13 [mem 0x80000000-0xdfffffff]
[    0.168424] pci_bus 0000:00: resource 14 [mem 0xf0000000-0xffffffff]
[    0.168428] pci_bus 0000:00: resource 15 [io  0x0000-0x0cf7]
[    0.168432] pci_bus 0000:00: resource 16 [io  0x0d00-0xffff]
[    0.168436] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.168440] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[    0.168444] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.168448] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.168452] pci_bus 0000:02: resource 1 [mem 0x80000000-0x800fffff]
[    0.168456] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.168461] pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
[    0.168464] pci_bus 0000:03: resource 1 [mem 0xd0300000-0xd03fffff]
[    0.168469] pci_bus 0000:04: resource 4 [mem 0x000a0000-0x000bffff]
[    0.168473] pci_bus 0000:04: resource 5 [mem 0x000d0000-0x000d1fff]
[    0.168476] pci_bus 0000:04: resource 6 [mem 0x000d2000-0x000d3fff]
[    0.168480] pci_bus 0000:04: resource 7 [mem 0x000d4000-0x000d5fff]
[    0.168484] pci_bus 0000:04: resource 8 [mem 0x000d6000-0x000d7fff]
[    0.168488] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000d9fff]
[    0.168492] pci_bus 0000:04: resource 10 [mem 0x000da000-0x000dbfff]
[    0.168496] pci_bus 0000:04: resource 11 [mem 0x000dc000-0x000ddfff]
[    0.168500] pci_bus 0000:04: resource 12 [mem 0x000de000-0x000dffff]
[    0.168504] pci_bus 0000:04: resource 13 [mem 0x80000000-0xdfffffff]
[    0.168508] pci_bus 0000:04: resource 14 [mem 0xf0000000-0xffffffff]
[    0.168512] pci_bus 0000:04: resource 15 [io  0x0000-0x0cf7]
[    0.168515] pci_bus 0000:04: resource 16 [io  0x0d00-0xffff]
[    0.168580] NET: Registered protocol family 2
[    0.168660] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.169052] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.169852] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.170219] TCP: Hash tables configured (established 131072 bind 65536)
[    0.170224] TCP reno registered
[    0.170228] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.170246] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.170368] NET: Registered protocol family 1
[    0.170384] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    0.170627] pci 0000:01:05.0: Boot video device
[    0.170686] PCI: CLS 32 bytes, default 64
[    0.170772] Unpacking initramfs...
[    0.633575] Freeing initrd memory: 11772k freed
[    0.642140] audit: initializing netlink socket (disabled)
[    0.642155] type=2000 audit(1352404137.640:1): initialized
[    0.663170] highmem bounce pool size: 64 pages
[    0.663177] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.663764] VFS: Disk quotas dquot_6.5.2
[    0.663802] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.663892] msgmni has been set to 1739
[    0.664236] alg: No test for stdrng (krng)
[    0.664267] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.664272] io scheduler noop registered
[    0.664275] io scheduler deadline registered
[    0.664286] io scheduler cfq registered (default)
[    0.664401] pcieport 0000:00:05.0: setting latency timer to 64
[    0.664447] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[    0.664542] pcieport 0000:00:06.0: setting latency timer to 64
[    0.664579] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[    0.664703] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[    0.664708] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.664713] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[    0.664733] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[    0.664737] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.664741] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[    0.664770] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.664811] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.664814] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.665197] ERST: Table is not found!
[    0.665200] GHES: HEST is not enabled!
[    0.665218] isapnp: Scanning for PnP cards...
[    1.076637] isapnp: No Plug & Play device found
[    1.076716] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.077787] Linux agpgart interface v0.103
[    1.078381] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.084199] i8042: Detected active multiplexing controller, rev 1.1
[    1.088313] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.088322] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.088369] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.088408] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.088447] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.088612] mousedev: PS/2 mouse device common for all mice
[    1.088744] rtc_cmos 00:04: RTC can wake from S4
[    1.088869] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.088967] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.088983] cpuidle: using governor ladder
[    1.088986] cpuidle: using governor menu
[    1.089312] TCP cubic registered
[    1.089344] NET: Registered protocol family 10
[    1.090094] Mobile IPv6
[    1.090098] NET: Registered protocol family 17
[    1.090103] Registering the dns_resolver key type
[    1.090142] Using IPI No-Shortcut mode
[    1.090274] PM: Hibernation image not present or could not be loaded.
[    1.090288] registered taskstats version 1
[    1.090944] rtc_cmos 00:04: setting system clock to 2012-11-08 19:48:58 UTC (1352404138)
[    1.091004] Initializing network drop monitor service
[    1.091183] Freeing unused kernel memory: 416k freed
[    1.091521] Write protecting the kernel text: 2844k
[    1.091561] Write protecting the kernel read-only data: 1092k
[    1.091564] NX-protecting the kernel data: 3300k
[    1.131724] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.176331] udevd[47]: starting version 175
[    1.271554] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.271654] r8169 0000:02:00.0: setting latency timer to 64
[    1.271709] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[    1.312154] thermal LNXTHERM:00: registered as thermal_zone0
[    1.312159] ACPI: Thermal Zone [TZ00] (37 C)
[    1.312897] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xf8210000, c8:0a:a9:05:43:d0, XID 081000c0 IRQ 42
[    1.312903] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.387698] SCSI subsystem initialized
[    1.388747] [drm] Initialized drm 1.1.0 20060810
[    1.428459] usbcore: registered new interface driver usbfs
[    1.428493] usbcore: registered new interface driver hub
[    1.442050] usbcore: registered new device driver usb
[    1.442760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.442849] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.442886] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.442935] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.442973] ehci_hcd 0000:00:12.2: debug port 1
[    1.443007] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd0607400
[    1.448976] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.453522] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.453559] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.453564] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.453568] usb usb1: Product: EHCI Host Controller
[    1.453571] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[    1.453575] usb usb1: SerialNumber: 0000:00:12.2
[    1.453752] hub 1-0:1.0: USB hub found
[    1.453759] hub 1-0:1.0: 6 ports detected
[    1.453967] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.453986] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.453997] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.454032] ehci_hcd 0000:00:13.2: debug port 1
[    1.454065] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0607800
[    1.464090] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.464160] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.464165] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.464169] usb usb2: Product: EHCI Host Controller
[    1.464172] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[    1.464175] usb usb2: SerialNumber: 0000:00:13.2
[    1.464373] hub 2-0:1.0: USB hub found
[    1.464380] hub 2-0:1.0: 6 ports detected
[    1.465385] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.465403] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.465450] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd0604000
[    1.529638] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.529644] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.529648] usb usb3: Product: OHCI Host Controller
[    1.529651] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[    1.529655] usb usb3: SerialNumber: 0000:00:12.0
[    1.529824] hub 3-0:1.0: USB hub found
[    1.529868] hub 3-0:1.0: 3 ports detected
[    1.530028] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    1.530040] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.530068] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd0605000
[    1.533356] libata version 3.00 loaded.
[    1.574598] pci 0000:01:05.0: setting latency timer to 64
[    1.574830] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.574834] [drm] No driver support for vblank timestamp query.
[    1.574839] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0
[    1.588095] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.588100] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.588104] usb usb4: Product: OHCI Host Controller
[    1.588107] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[    1.588111] usb usb4: SerialNumber: 0000:00:12.1
[    1.588447] hub 4-0:1.0: USB hub found
[    1.588458] hub 4-0:1.0: 3 ports detected
[    1.588554] ahci 0000:00:11.0: version 3.0
[    1.588709] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    1.588715] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    1.589193] scsi0 : ahci
[    1.589386] ata1: SATA max UDMA/133 abar m1024@0xd0607000 port 0xd0607100 irq 22
[    1.589961] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.589978] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.590018] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0606000
[    1.648078] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.648082] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.648086] usb usb5: Product: OHCI Host Controller
[    1.648089] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[    1.648093] usb usb5: SerialNumber: 0000:00:13.0
[    1.649395] hub 5-0:1.0: USB hub found
[    1.649408] hub 5-0:1.0: 3 ports detected
[    1.660057] Refined TSC clocksource calibration: 1596.000 MHz.
[    1.660066] Switching to clocksource tsc
[    1.776042] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.080029] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.131429] ata1.00: ATA-8: ST9160314AS, 0020LVM1, max UDMA/100
[    2.131434] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.133376] ata1.00: configured for UDMA/100
[    2.133517] scsi 0:0:0:0: Direct-Access     ATA      ST9160314AS      0020 PQ: 0 ANSI: 5
[    2.142555] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.142617] sd 0:0:0:0: [sda] Write Protect is off
[    2.142622] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.142649] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.147480]  sda: sda1 sda2
[    2.147925] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.151241] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.153321] usb 2-1: New USB device found, idVendor=0bda, idProduct=0158
[    2.153327] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.153331] usb 2-1: Product: USB2.0-CRW
[    2.153334] usb 2-1: Manufacturer: Generic
[    2.153337] usb 2-1: SerialNumber: 20071114173400000
[    2.164296] usbcore: registered new interface driver uas
[    2.167396] Initializing USB Mass Storage driver...
[    2.167754] usbcore: registered new interface driver usb-storage
[    2.167758] USB Mass Storage support registered.
[    2.190045] scsi1 : usb-storage 2-1:1.0
[    2.190155] usbcore: registered new interface driver ums-realtek
[    2.268086] usb 2-2: new high-speed USB device number 3 using ehci_hcd
[    2.403504] usb 2-2: New USB device found, idVendor=064e, idProduct=e201
[    2.403510] usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.403514] usb 2-2: Product: Integrated Camera
[    2.403517] usb 2-2: Manufacturer: SuYin
[    2.403520] usb 2-2: SerialNumber: Integrated Camera
[    2.404224] usb 2-1: USB disconnect, device number 2
[    2.432650] device-mapper: uevent: version 1.0.3
[    2.433109] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   64.822394] PM: Starting manual resume from disk
[   64.822401] PM: Hibernation image partition 254:1 present
[   64.822404] PM: Looking for hibernation image.
[   64.822927] PM: Image not found (code -22)
[   64.822930] PM: Hibernation image not present or could not be loaded.
[   64.828482] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[   64.828489] PM: Basic memory bitmaps created
[   64.839184] PM: Basic memory bitmaps freed
[   64.868296] kjournald starting.  Commit interval 5 seconds
[   64.868328] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[   67.157281] udevd[339]: starting version 175
[   68.043686] ACPI: processor limited to max C-state 2
[   68.043693] Marking TSC unstable due to TSC halts in idle
[   68.043704] ACPI: acpi_idle registered with cpuidle
[   68.052817] Switching to clocksource hpet
[   68.081641] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   68.157908] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   68.158427] acpi device:21: registered as cooling_device1
[   68.158554] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input1
[   68.158562] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   68.208355] ACPI: AC Adapter [ACAD] (on-line)
[   68.208494] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[   68.208629] ACPI: Power Button [PWRB]
[   68.208721] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[   68.208814] ACPI: Sleep Button [SLPB]
[   68.208982] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[   68.211310] ACPI: Lid Switch [LID]
[   68.211431] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   68.211568] ACPI: Power Button [PWRF]
[   68.277833] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   68.410401] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8040, revision 0
[   68.502261] cfg80211: Calling CRDA to update world regulatory domain
[   68.580814] ACPI: Battery Slot [BAT1] (battery present)
[   68.581323] wmi: Mapper loaded
[   68.670406] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   68.740316] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[   68.740446] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[   68.816918] powernow-k8: Found 1 AMD Athlon(tm) Neo Processor MV-40 (1 cpu cores) (version 2.20.00)
[   68.816966] powernow-k8: fid 0x8 (1600 MHz), vid 0x16
[   68.816970] powernow-k8: fid 0x0 (800 MHz), vid 0x16
[   69.108461] rtl8192se 0000:03:00.0: setting latency timer to 64
[   69.123028] rtl8192se: rtl8192ce: FW Power Save off (module option)
[   69.159204] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[   69.159212] Loading firmware rtlwifi/rtl8192sefw.bin
[   69.291672] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000
[   69.291696] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[   69.354927] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[   69.367102] Linux media interface: v0.10
[   69.550066] Linux video capture interface: v2.00
[   69.577360] Non-volatile memory driver v1.3
[   69.614852] uvcvideo: Found UVC 1.00 device Integrated Camera (064e:e201)
[   69.617904] input: Integrated Camera as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input8
[   69.618741] usbcore: registered new interface driver uvcvideo
[   69.618749] USB Video Class driver (1.1.1)
[   69.640351] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[   69.640360] thinkpad_acpi: http://ibm-acpi.sf.net/
[   69.640366] thinkpad_acpi: ThinkPad BIOS 6XET44WW (1.27 ), EC 6XHT42WW-1.182000
[   69.640373] thinkpad_acpi: Lenovo ThinkPad X100e, model 287655G
[   69.645688] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[   69.645796] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[   69.686531] thinkpad_acpi: asked for hotkey mask 0x040988fc, but firmware forced it to 0x000988fc
[   69.690008] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   69.742622] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[   69.744147] Registered led device: tpacpi::thinklight
[   69.744235] Registered led device: tpacpi::power
[   69.744289] Registered led device: tpacpi::standby
[   69.744343] Registered led device: tpacpi::thinkvantage
[   69.770024] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   69.771156] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   69.796229] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[   70.051099] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[   72.356902] EXT3-fs (dm-2): using internal journal
[   72.701541] loop: module loaded
[   73.976091] Adding 5312508k swap on /dev/mapper/jet-swap_1.  Priority:-1 extents:1 across:5312508k 
[   74.733249] kjournald starting.  Commit interval 5 seconds
[   74.736433] EXT3-fs (dm-3): using internal journal
[   74.736446] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[   76.420314] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   76.691081] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input11
[   76.852537] r8169 0000:02:00.0: eth0: link down
[   76.855296] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   77.167905] RPC: Registered named UNIX socket transport module.
[   77.167916] RPC: Registered udp transport module.
[   77.167922] RPC: Registered tcp transport module.
[   77.167928] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   77.218630] FS-Cache: Loaded
[   77.297176] FS-Cache: Netfs 'nfs' registered for caching
[   77.328557] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   78.200470] fuse init (API version 7.17)
[   81.851406] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[   85.213263] lp: driver loaded but no devices found
[   85.243283] ppdev: user-space parallel port driver
[   85.569172] [drm] Setting GART location based on new memory map
[   85.572587] [drm] Loading RS780 CP Microcode
[   85.749828] [drm] Resetting GPU
[   85.749895] [drm] writeback test succeeded in 1 usecs
[  104.500406] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  109.015329] [drm] Resetting GPU
[  111.195993] [drm] Setting GART location based on new memory map
[  111.204047] [drm] Loading RS780 CP Microcode
[  111.272871] [drm] Resetting GPU
[  111.272932] [drm] writeback test succeeded in 1 usecs
[  112.500369] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  113.294994] r8169 0000:02:00.0: eth0: link down
[  113.369606] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  113.402805] [drm] Resetting GPU
[  113.906475] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  115.425689] [drm] Setting GART location based on new memory map
[  115.432582] [drm] Loading RS780 CP Microcode
[  115.485036] [drm] Resetting GPU
[  115.485097] [drm] writeback test succeeded in 1 usecs
[  117.078845] [drm] Resetting GPU
[  117.353149] wlan0: authenticate with c0:25:06:9c:58:61 (try 1)
[  117.552137] wlan0: authenticate with c0:25:06:9c:58:61 (try 2)
[  117.752085] wlan0: authenticate with c0:25:06:9c:58:61 (try 3)
[  117.953206] wlan0: authentication with c0:25:06:9c:58:61 timed out
[  119.075469] [drm] Setting GART location based on new memory map
[  119.081295] [drm] Loading RS780 CP Microcode
[  119.137068] [drm] Resetting GPU
[  119.137135] [drm] writeback test succeeded in 1 usecs
[  119.944508] [drm] Resetting GPU
[  129.359198] wlan0: authenticate with c0:25:06:9c:58:61 (try 1)
[  129.361419] wlan0: authenticated
[  129.361472] wlan0: associate with c0:25:06:9c:58:61 (try 1)
[  129.365797] wlan0: RX AssocResp from c0:25:06:9c:58:61 (capab=0x411 status=0 aid=2)
[  129.365807] wlan0: associated
[  129.367369] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  139.440066] wlan0: no IPv6 routers present
[  164.752182] mtrr: MTRR 1 not used
[ 2671.353588] [drm] Setting GART location based on new memory map
[ 2671.356955] [drm] Loading RS780 CP Microcode
[ 2671.415630] [drm] Resetting GPU
[ 2671.415697] [drm] writeback test succeeded in 1 usecs
[ 2702.899266] [drm] Resetting GPU
[ 2703.638258] mtrr: MTRR 1 not used
[ 2747.177321] [drm] Setting GART location based on new memory map
[ 2747.182772] [drm] Loading RS780 CP Microcode
[ 2747.238177] [drm] Resetting GPU
[ 2747.238243] [drm] writeback test succeeded in 1 usecs
[ 2779.221667] [drm] Resetting GPU
[ 2790.248941] [drm] Resetting GPU
[ 6475.620602] wlan0: deauthenticating from c0:25:06:9c:58:61 by local choice (reason=3)
[ 6475.623917] cfg80211: Calling CRDA for country: EC
[ 6475.851985] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6476.227151] r8169 0000:02:00.0: eth0: link down
[ 6476.227880] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6476.638256] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6476.805646] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6477.127251] r8169 0000:02:00.0: eth0: link down
[ 6477.130386] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6477.889579] [drm] Resetting GPU
[ 6479.104586] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[ 6479.104592] PM: Basic memory bitmaps created
[ 6479.417364] Syncing filesystems ... done.
[ 6479.444219] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6479.460226] PM: Preallocating image memory... done (allocated 218176 pages)
[ 6480.515255] PM: Allocated 872704 kbytes in 1.05 seconds (831.14 MB/s)
[ 6480.515259] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6480.528274] Suspending console(s) (use no_console_suspend to debug)
[ 6480.641314] ACPI handle has no context!
[ 6480.732063] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6480.732512] PM: freeze of devices complete after 204.196 msecs
[ 6480.733117] PM: late freeze of devices complete after 0.600 msecs
[ 6480.733218] ACPI: Preparing to enter system sleep state S4
[ 6481.100160] PM: Saving platform NVS memory
[ 6481.100175] Disabling non-boot CPUs ...
[ 6481.100287] PM: Creating hibernation image:
[ 6481.104050] PM: Need to copy 147891 pages
[ 6481.104050] PM: Normal pages needed: 57262 + 1024, available pages: 170430
[ 6481.104050] PM: Restoring platform NVS memory
[ 6481.104050] ACPI: Waking up from system sleep state S4
[ 6481.113006] PM: early restore of devices complete after 0.796 msecs
[ 6481.162608] pci 0000:01:05.0: setting latency timer to 64
[ 6481.213873] sd 0:0:0:0: [sda] Starting disk
[ 6481.220052] usb usb3: root hub lost power or was reset
[ 6481.224050] usb usb4: root hub lost power or was reset
[ 6481.228044] usb usb5: root hub lost power or was reset
[ 6481.228198] r8169 0000:02:00.0: eth0: link down
[ 6481.228229] usb usb1: root hub lost power or was reset
[ 6481.228262] usb usb2: root hub lost power or was reset
[ 6481.576066] usb 2-2: reset high-speed USB device number 3 using ehci_hcd
[ 6481.696076] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6481.748891] ata1.00: configured for UDMA/100
[ 6481.928508] PM: restore of devices complete after 766.395 msecs
[ 6481.938784] Restarting kernel threads ... done.
[ 6481.938959] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 6481.938963] Restarting tasks ... done.
[ 6481.961765] PM: Basic memory bitmaps freed
[ 6481.962598] video LNXVIDEO:00: Restoring backlight state
[ 6484.312052] [drm] Resetting GPU
[ 6492.618965] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6493.089390] r8169 0000:02:00.0: eth0: link down
[ 6493.090108] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6493.564954] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6496.519328] wlan0: authenticate with c0:25:06:9c:58:61 (try 1)
[ 6496.520940] wlan0: authenticated
[ 6496.520991] wlan0: associate with c0:25:06:9c:58:61 (try 1)
[ 6496.523980] wlan0: RX AssocResp from c0:25:06:9c:58:61 (capab=0x411 status=0 aid=1)
[ 6496.523987] wlan0: associated
[ 6496.526660] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6506.527711] wlan0: deauthenticating from c0:25:06:9c:58:61 by local choice (reason=3)
[ 6506.528510] cfg80211: Calling CRDA to update world regulatory domain
[ 6507.464070] wlan0: no IPv6 routers present
[ 6508.542125] wlan0: authenticate with c0:25:06:9c:58:61 (try 1)
[ 6508.543714] wlan0: authenticated
[ 6508.543768] wlan0: associate with c0:25:06:9c:58:61 (try 1)
[ 6508.546904] wlan0: RX AssocResp from c0:25:06:9c:58:61 (capab=0x411 status=0 aid=1)
[ 6508.546913] wlan0: associated
[ 9904.279937] [drm] Resetting GPU
[ 9930.184441] [drm] Resetting GPU
[10076.339426] [drm] Resetting GPU
[10080.838036] [drm] Resetting GPU

Reply to: