Bug#689748: xserver-xorg-video-nouveau: kernel bug, frozen display
Package: xserver-xorg-video-nouveau Version: 1:1.0.1-3 Justification:
breaks the whole system Severity: critical Tags: d-i
X-Debbugs-Cc: eclectic@freeshell.org
Dear Maintainer,
* What led up to the situation?
An installation of wheezy beta2 on a clean disk.
* What exactly did you do (or not do) that was effective (or
ineffective)?
First, the cursor was displayed incorrectly. Using option SWcursor
caused it to be displayed correctly. But that's not the critical issue.
Logging in causes the display to freeze and it is no longer possible to
switch consoles. I had to get into the machine via ssh. Only the background
is displayed at this point.
* What was the outcome of this action?
Frozen display.
* What outcome did you expect instead?
That the kde desktop would display properly and be usable.
In an attempt to isolate the problem I commented out the sections about
display 2 since this video chip only has the main screen and a TV out, that
I had been using with lenny/kde3 with the nvidia binary driver. Also
commented our are the lesser resolution modes.
I'm willing to test and/or provide more info if necessary. Thanks!
Reportbug didn't catch automatically the most relevant part of the log. It
is right here:
Oct 5 10:27:09 tashi kernel: [ 188.167061] ------------[ cut here ]------------
Oct 5 10:27:09 tashi kernel: [ 188.167128] kernel BUG at /build/buildd-linux_3.2.23-1-i386-qhsd1M/linux-3.2.23/drivers/gpu/drm/nouveau/nouveau_fence.c:155!
Oct 5 10:27:09 tashi kernel: [ 188.167254] invalid opcode: 0000 [#1]
Oct 5 10:27:09 tashi kernel: [ 188.167301] Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables ppdev lp bnep rfcomm bluetooth ch7006 nouveau mxm_wmi wmi ttm drm_kms_helper drm i2c_algo_bit i2c_core binfmt_misc uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc nls_utf8 nls_cp437 vfat fat loop joydev iTCO_wdt iTCO_vendor_support ipw2100 libipw lib80211 cfg80211 snd_intel8x0 snd_intel8x0m snd_ac97_codec rfkill snd_pcm rng_core psmouse snd_page_alloc yenta_socket dcdbas serio_raw evdev snd_seq snd_seq_device snd_timer pcmcia_rsrc pcspkr snd parport_pc soundcore parport acpi_cpufreq mperf ac97_bus irda crc_ccitt video ac processor battery button shpchp ext4 crc16 jbd2 mbcache dm_mod sg sr_mod sd_mod cdrom crc_t10dif ata_generic ata_piix libata uhci_hcd firewire_ohci ehci_hcd scsi_mod firewire_core usbcore b44 ssb mmc_core mii pcmcia thermal thermal_sys crc_itu_t pcmcia_core usb_common [last unloaded: scsi_wait_scan]
Oct 5 10:27:09 tashi kernel: [ 188.168014]
Oct 5 10:27:09 tashi kernel: [ 188.168014] Pid: 3680, comm: gnome-shell Not tainted 3.2.0-3-486 #1 Dell Computer Corporation Inspiron 8600 /0X1069
Oct 5 10:27:09 tashi kernel: [ 188.168014] EIP: 0060:[<f89cb057>] EFLAGS: 00010246 CPU: 0
Oct 5 10:27:09 tashi kernel: [ 188.168014] EIP is at nouveau_fence_emit+0x43/0xc9 [nouveau]
Oct 5 10:27:09 tashi kernel: [ 188.168014] EAX: 0000000f EBX: f28ee800 ECX: 00000002 EDX: 00000001
Oct 5 10:27:09 tashi kernel: [ 188.168014] ESI: f2af7b40 EDI: f6c37000 EBP: 00000000 ESP: f29c9e34
Oct 5 10:27:09 tashi kernel: [ 188.168014] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Oct 5 10:27:09 tashi kernel: [ 188.168014] Process gnome-shell (pid: 3680, ti=f29c8000 task=f29a5410 task.ti=f29c8000)
Oct 5 10:27:09 tashi kernel: [ 188.168014] Stack:
Oct 5 10:27:09 tashi kernel: [ 188.168014] f6e00000 f28ee801 f29c9e64 f28ee800 00000000 f89cb16f f2af7b40 f28ee800
Oct 5 10:27:09 tashi kernel: [ 188.168014] f6c37000 00000046 f6c37000 f89c579e 00000000 f29c9e9c f2a0c340 00000046
Oct 5 10:27:09 tashi kernel: [ 188.168014] f89c7a6d f28ee800 fffffff2 f8398bfd f29c9e9c 00000008 f8a2a284 40086446
Oct 5 10:27:09 tashi kernel: [ 188.168014] Call Trace:
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<f89cb16f>] ? nouveau_fence_new+0x4c/0x66 [nouveau]
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<f89c579e>] ? nouveau_channel_idle+0x2a/0x77 [nouveau]
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<f89c7a6d>] ? nouveau_ioctl_gpuobj_free+0x20/0x39 [nouveau]
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<f8398bfd>] ? drm_ioctl+0x237/0x2ee [drm]
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<f89c7a4d>] ? nouveau_ioctl_grobj_alloc+0x86/0x86 [nouveau]
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<f83989c6>] ? drm_copy_field+0x48/0x48 [drm]
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<c10ae463>] ? do_vfs_ioctl+0x462/0x499
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<c101d800>] ? finish_task_switch.isra.156+0x2b/0x82
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<c12807d3>] ? __schedule+0x384/0x3a5
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<c11e24a8>] ? sys_recv+0x19/0x1d
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<c1043d9f>] ? sys_futex+0xe4/0xf5
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<c10ae4de>] ? sys_ioctl+0x44/0x66
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<c1026e8e>] ? irq_exit+0x58/0x7b
Oct 5 10:27:09 tashi kernel: [ 188.168014] [<c12852e3>] ? sysenter_do_call+0x12/0x28
Oct 5 10:27:09 tashi kernel: [ 188.168014] Code: 24 89 d8 e8 01 fe ff ff 85 c0 89 c5 0f 85 97 00 00 00 8b 43 44 48 39 43 40 75 12 89 d8 e8
Oct 5 10:27:09 tashi kernel: [ 188.168014] [drm] nouveau 0000:01:00.0: GPU lockup - switching to software fbcon
Oct 5 10:27:09 tashi kernel: [ 188.168014] 20 ff ff ff 8b 43 44 48 39 43 40 75 02 <0f> 0b 8b 43 40 40 89 43 40 89 46 10 8d 46 04 e8 2a 42 76 c8 8b
Oct 5 10:27:09 tashi kernel: [ 188.168014] EIP: [<f89cb057>] nouveau_fence_emit+0x43/0xc9 [nouveau] SS:ESP 0068:f29c9e34
Oct 5 10:27:09 tashi kernel: [ 188.246898] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1)
Oct 5 10:27:09 tashi kernel: [ 188.246965] [drm] nouveau 0000:01:00.0: Calling LVDS script 6:
Oct 5 10:27:09 tashi kernel: [ 188.247017] [drm] nouveau 0000:01:00.0: 0xDACF: Parsing digital output script table
Oct 5 10:27:09 tashi kernel: [ 188.250854] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
Oct 5 10:27:09 tashi kernel: [ 188.250854] [drm] nouveau 0000:01:00.0: Calling LVDS script 2:
Oct 5 10:27:09 tashi kernel: [ 188.250854] [drm] nouveau 0000:01:00.0: 0xDAFE: Parsing digital output script table
Oct 5 10:27:09 tashi kernel: [ 188.250854] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1)
Oct 5 10:27:09 tashi kernel: [ 188.250854] [drm] nouveau 0000:01:00.0: Calling LVDS script 5:
Oct 5 10:27:09 tashi kernel: [ 188.250854] [drm] nouveau 0000:01:00.0: 0xDA48: Parsing digital output script table
Oct 5 10:27:09 tashi kernel: [ 188.250854] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output B
Oct 5 10:27:09 tashi kernel: [ 188.250854] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
Oct 5 10:27:09 tashi kernel: [ 189.078420] ---[ end trace 84e4038773ec0aa9 ]---
-- Package-specific info: X server symlink status:
------------------------ lrwxrwxrwx 1 root root 13 Oct 4 16:27
/etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 2027892 Aug 22 05:38
/usr/bin/Xorg
Diversions concerning libGL are in place
---------------------------------------- diversion of /usr/lib/libGL.so
to /usr/lib/mesa-diverted/libGL.so by glx-diversions diversion of
/usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by
glx-diversions diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to
/usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/libGL.so.1.2 to
/usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions diversion of
/usr/lib/x86_64-linux-gnu/libGL.so to
/usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
VGA-compatible devices on PCI bus: ----------------------------------
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV28
[GeForce4 Ti 4200 Go AGP 8x] [10de:0286] (rev a1)
Xorg X server configuration file status:
---------------------------------------- -rw-r--r-- 1 root root 5014 Oct
5 10:23 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf: ------------------------------- Section
"ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
# Screen 2 "Screen2" RightOf "Screen1"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard" EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins" EndSection
Section "Module"
Load "record"
Load "glx"
Load "dbe"
Load "extmod"
Load "dri"
Load "dri2" EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd" EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7" EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model" EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model" EndSection
#Section "Monitor"
# Identifier "Monitor2" VendorName "Monitor Vendor" ModelName
#"Monitor Model" EndSection
Section "Device"
### Available Driver options are:- Values: <i>: integer, <f>:
### float, <bool>: "True"/"False", <string>: "String", <freq>:
### "<f> Hz/kHz/MHz", <percent>: "<f>%" [arg]: arg optional
Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>] Option "NoAccel" # [<bool>] Option
#"ShadowFB" # [<bool>] Option "VideoKey" # <i> Option
#"WrappedFB" # [<bool>] Option "GLXVBlank" # [<bool>] Option
#"ZaphodHeads" # <str> Option "PageFlip" # [<bool>] Option
#"SwapLimit" # <i> Option "AsyncUTSDFS" # [<bool>]
Identifier "Card0"
Driver "nouveau"
BusID "PCI:1:0:0" EndSection
#Section "Device"
# ### Available Driver options are:- Values: <i>: integer, <f>:
# ### float, <bool>: "True"/"False", <string>: "String", <freq>:
# ### "<f> Hz/kHz/MHz", <percent>: "<f>%" [arg]: arg optional
# #Option "ShadowFB" # [<bool>] Option "Rotate" # <str> Option
# #"fbdev" # <str> Option "debug" # [<bool>]
# Identifier "Card1" Driver "fbdev" BusID "PCI:1:0:0" EndSection
#Section "Device"
# ### Available Driver options are:- Values: <i>: integer, <f>:
# ### float, <bool>: "True"/"False", <string>: "String", <freq>:
# ### "<f> Hz/kHz/MHz", <percent>: "<f>%" [arg]: arg optional
# #Option "ShadowFB" # [<bool>] Option "DefaultRefresh" #
# #[<bool>] Option "ModeSetClearScreen" # [<bool>]
# Identifier "Card2" Driver "vesa" BusID "PCI:1:0:0" EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
# SubSection "Display"
# Viewport 0 0 Depth 1 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 4 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 8 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 15 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 16 EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
# SubSection "Display"
# Viewport 0 0 Depth 1 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 4 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 8 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 15 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 16 EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection EndSection
#Section "Screen"
# Identiier "Screen2" Device "Card2" Monitor "Monitor2" SubSection
# "Display"
# Viewport 0 0 Depth 1 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 4 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 8 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 15 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 16 EndSubSection SubSection "Display"
# Viewport 0 0 Depth 24 EndSubSection EndSection
/etc/X11/xorg.conf.d does not exist.
KMS configuration files: ------------------------
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version): ------------------------------- Linux
version 3.2.0-3-486 (Debian 3.2.23-1) (debian-kernel@lists.debian.org)
(gcc version 4.6.3 (Debian 4.6.3-8) ) #1 Mon Jul 23 02:47:49 UTC 2012
Xorg X server log files on system: ----------------------------------
-rw-r--r-- 1 root root 31882 Oct 5 10:27 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
--------------------------------------------------------------------- [
16.832] X.Org X Server 1.12.3.902 (1.12.4 RC 2) Release Date: 2012-08-19
[ 16.832] X Protocol Version 11, Revision 0 [ 16.832] Build Operating
System: Linux 2.6.32-5-amd64 i686 Debian [ 16.832] Current Operating
System: Linux tashi 3.2.0-3-486 #1 Mon Jul 23 02:47:49 UTC 2012 i686 [
16.832] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-486
root=UUID=e158a6d2-a704-48e9-8bdb-2f38417d8b41 ro quiet [ 16.832] Build
Date: 22 August 2012 09:32:08AM [ 16.832] xorg-server 2:1.12.3.902-1
(Julien Cristau <jcristau@debian.org>) [ 16.832] Current version of
pixman: 0.26.0 [ 16.832] Before reporting problems, check
http://wiki.x.org
to make sure that you have the latest version. [ 16.832]
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown. [
16.833] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 5 10:24:17
2012 [ 16.880] (==) Using config file: "/etc/X11/xorg.conf" [ 16.880]
(==) Using system config directory "/usr/share/X11/xorg.conf.d" [
16.918] (==) ServerLayout "X.org Configured" [ 16.918] (**) |-->Screen
"Screen0" (0) [ 16.918] (**) | |-->Monitor "Monitor0" [ 16.919] (**) |
|-->Device "Card0" [ 16.919] (**) |-->Screen "Screen1" (1) [ 16.919]
(**) | |-->Monitor "Monitor1" [ 16.920] (==) No device specified for
screen "Screen1".
Using the first device section listed. [ 16.920] (**) |
|-->Device "Card0" [ 16.920] (**) |-->Input Device "Mouse0" [ 16.920]
(**) |-->Input Device "Keyboard0" [ 16.920] (==) Automatically adding
devices [ 16.920] (==) Automatically enabling devices [ 16.946] (WW) The
directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 16.946]
Entry deleted from font path. [ 17.162] (WW) The directory
"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [
17.162] Entry deleted from font path. [ 17.163] (WW) The directory
"/usr/share/fonts/X11/cyrillic" does not exist. [ 17.163] Entry deleted
from font path. [ 17.163] (WW) The directory
"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [
17.163] Entry deleted from font path. [ 17.163] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins [ 17.163] (**) ModulePath set to
"/usr/lib/xorg/modules" [ 17.163] (WW) Hotplugging is on, devices using
drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 17.163] (WW)
Disabling Mouse0 [ 17.163] (WW) Disabling Keyboard0 [ 17.163] (II)
Loader magic: 0xb77665a0 [ 17.163] (II) Module ABI versions: [ 17.163]
X.Org ANSI C Emulation: 0.4 [ 17.163] X.Org Video Driver: 12.1 [ 17.163]
X.Org XInput driver : 16.0 [ 17.163] X.Org Server Extension : 6.0 [
17.165] (--) PCI:*(0:1:0:0) 10de:0286:1028:0179 rev 161, Mem @
0xfc000000/16777216, 0xf0000000/67108864, BIOS @ 0x????????/131072 [
17.165] (II) Open ACPI successful (/var/run/acpid.socket) [ 17.165] (II)
"extmod" will be loaded. This was enabled by default and also specified
in the config file. [ 17.165] (II) "dbe" will be loaded. This was
enabled by default and also specified in the config file. [ 17.165] (II)
"glx" will be loaded. This was enabled by default and also specified in
the config file. [ 17.165] (II) "record" will be loaded. This was
enabled by default and also specified in the config file. [ 17.165] (II)
"dri" will be loaded. This was enabled by default and also specified in
the config file. [ 17.166] (II) "dri2" will be loaded. This was enabled
by default and also specified in the config file. [ 17.166] (II)
LoadModule: "record" [ 17.179] (II) Loading
/usr/lib/xorg/modules/extensions/librecord.so [ 17.189] (II) Module
record: vendor="X.Org Foundation" [ 17.189] compiled for 1.12.3.902,
module version = 1.13.0 [ 17.189] Module class: X.Org Server Extension [
17.189] ABI class: X.Org Server Extension, version 6.0 [ 17.189] (II)
Loading extension RECORD [ 17.189] (II) LoadModule: "glx" [ 17.190] (II)
Loading /usr/lib/xorg/modules/extensions/libglx.so [ 17.209] (II) Module
glx: vendor="X.Org Foundation" [ 17.209] compiled for 1.12.3.902, module
version = 1.0.0 [ 17.209] ABI class: X.Org Server Extension, version 6.0
[ 17.209] (==) AIGLX enabled [ 17.210] (II) Loading extension GLX [
17.210] (II) LoadModule: "dbe" [ 17.210] (II) Loading
/usr/lib/xorg/modules/extensions/libdbe.so [ 17.211] (II) Module dbe:
vendor="X.Org Foundation" [ 17.211] compiled for 1.12.3.902, module
version = 1.0.0 [ 17.211] Module class: X.Org Server Extension [ 17.211]
ABI class: X.Org Server Extension, version 6.0 [ 17.211] (II) Loading
extension DOUBLE-BUFFER [ 17.211] (II) LoadModule: "extmod" [ 17.212]
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 17.221]
(II) Module extmod: vendor="X.Org Foundation" [ 17.221] compiled for
1.12.3.902, module version = 1.0.0 [ 17.221] Module class: X.Org Server
Extension [ 17.221] ABI class: X.Org Server Extension, version 6.0 [
17.221] (II) Loading extension SELinux [ 17.221] (II) Loading extension
MIT-SCREEN-SAVER [ 17.221] (II) Loading extension
XFree86-VidModeExtension [ 17.221] (II) Loading extension XFree86-DGA [
17.221] (II) Loading extension DPMS [ 17.221] (II) Loading extension
XVideo [ 17.221] (II) Loading extension XVideo-MotionCompensation [
17.221] (II) Loading extension X-Resource [ 17.221] (II) LoadModule:
"dri" [ 17.222] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 17.241] (II) Module dri: vendor="X.Org Foundation" [ 17.241] compiled
for 1.12.3.902, module version = 1.0.0 [ 17.241] ABI class: X.Org Server
Extension, version 6.0 [ 17.241] (II) Loading extension XFree86-DRI [
17.241] (II) LoadModule: "dri2" [ 17.242] (II) Loading
/usr/lib/xorg/modules/extensions/libdri2.so [ 17.243] (II) Module dri2:
vendor="X.Org Foundation" [ 17.243] compiled for 1.12.3.902, module
version = 1.2.0 [ 17.243] ABI class: X.Org Server Extension, version 6.0
[ 17.243] (II) Loading extension DRI2 [ 17.243] (II) LoadModule:
"nouveau" [ 17.244] (II) Loading
/usr/lib/xorg/modules/drivers/nouveau_drv.so [ 17.256] (II) Module
nouveau: vendor="X.Org Foundation" [ 17.256] compiled for 1.12.3, module
version = 1.0.1 [ 17.256] Module class: X.Org Video Driver [ 17.256] ABI
class: X.Org Video Driver, version 12.0 [ 17.258] (II) NOUVEAU driver
Date: Fri Jul 6 16:23:50 2012 +1000 [ 17.258] (II) NOUVEAU driver for
NVIDIA chipset families : [ 17.258] RIVA TNT (NV04) [ 17.258] RIVA TNT2
(NV05) [ 17.258] GeForce 256 (NV10) [ 17.258] GeForce 2 (NV11, NV15) [
17.258] GeForce 4MX (NV17, NV18) [ 17.258] GeForce 3 (NV20) [ 17.258]
GeForce 4Ti (NV25, NV28) [ 17.258] GeForce FX (NV3x) [ 17.258] GeForce 6
(NV4x) [ 17.258] GeForce 7 (G7x) [ 17.258] GeForce 8 (G8x) [ 17.258]
GeForce GTX 200 (NVA0) [ 17.258] GeForce GTX 400 (NVC0) [ 17.258] (++)
using VT number 7
[ 17.267] drmOpenDevice: node name is /dev/dri/card0 [ 18.554]
drmOpenByBusid: Searching for BusID pci:0000:01:00.0 [ 18.554]
drmOpenDevice: node name is /dev/dri/card0 [ 18.554] drmOpenDevice: open
result is 8, (OK) [ 18.554] drmOpenByBusid: drmOpenMinor returns 8 [
18.554] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 [ 18.554]
(II) [drm] nouveau interface version: 1.0.0 [ 18.554] (II) Loading sub
module "dri" [ 18.554] (II) LoadModule: "dri" [ 18.555] (II) Loading
/usr/lib/xorg/modules/extensions/libdri.so [ 18.555] (II) Module dri:
vendor="X.Org Foundation" [ 18.555] compiled for 1.12.3.902, module
version = 1.0.0 [ 18.555] ABI class: X.Org Server Extension, version 6.0
[ 18.555] (II) NOUVEAU(0): Loaded DRI module [ 18.555] drmOpenDevice:
node name is /dev/dri/card0 [ 18.555] drmOpenDevice: open result is 9,
(OK) [ 18.555] drmOpenDevice: node name is /dev/dri/card0 [ 18.555]
drmOpenDevice: open result is 9, (OK) [ 18.555] drmOpenByBusid:
Searching for BusID pci:0000:01:00.0 [ 18.555] drmOpenDevice: node name
is /dev/dri/card0 [ 18.555] drmOpenDevice: open result is 9, (OK) [
18.555] drmOpenByBusid: drmOpenMinor returns 9 [ 18.555] drmOpenByBusid:
drmGetBusid reports pci:0000:01:00.0 [ 18.555] (II) [drm] DRM interface
version 1.4 [ 18.555] (II) [drm] DRM open master succeeded. [ 18.555]
(--) NOUVEAU(0): Chipset: "NVIDIA NV28" [ 18.555] (==) NOUVEAU(0): Depth
24, (--) framebuffer bpp 32 [ 18.555] (==) NOUVEAU(0): RGB weight 888 [
18.555] (==) NOUVEAU(0): Default visual is TrueColor [ 18.555] (**)
NOUVEAU(0): Option "SWcursor" [ 18.555] (**) NOUVEAU(0): Using SW cursor
[ 18.555] (==) NOUVEAU(0): GLX sync to VBlank disabled. [ 18.555] (==)
NOUVEAU(0): Page flipping enabled [ 18.555] (==) NOUVEAU(0): Swap limit
set to 2 [Max allowed 2] [ 18.628] (II) NOUVEAU(0): Output VGA-1 using
monitor section Monitor0 [ 18.749] (II) NOUVEAU(0): Output LVDS-1 has no
monitor section [ 18.757] (II) NOUVEAU(0): Output DVI-D-1 has no monitor
section [ 18.824] (II) NOUVEAU(0): EDID for output VGA-1 [ 18.941] (II)
NOUVEAU(0): EDID for output LVDS-1 [ 18.941] (II) NOUVEAU(0):
Manufacturer: SHP Model: 139f Serial#: 0 [ 18.941] (II) NOUVEAU(0):
Year: 2003 Week: 35 [ 18.941] (II) NOUVEAU(0): EDID Version: 1.3 [
18.941] (II) NOUVEAU(0): Digital Display Input [ 18.941] (II)
NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21 [ 18.941] (II)
NOUVEAU(0): Gamma: 2.20 [ 18.941] (II) NOUVEAU(0): No DPMS capabilities
specified [ 18.941] (II) NOUVEAU(0): Supported color encodings: RGB
4:4:4 YCrCb 4:4:4 [ 18.941] (II) NOUVEAU(0): First detailed timing is
preferred mode [ 18.941] (II) NOUVEAU(0): redX: 0.596 redY: 0.334
greenX: 0.303 greenY: 0.559 [ 18.941] (II) NOUVEAU(0): blueX: 0.150
blueY: 0.123 whiteX: 0.312 whiteY: 0.328 [ 18.941] (II) NOUVEAU(0):
Manufacturer's mask: 0 [ 18.941] (II) NOUVEAU(0): Supported detailed
timing: [ 18.941] (II) NOUVEAU(0): clock: 161.8 MHz Image Size: 331 x
207 mm [ 18.941] (II) NOUVEAU(0): h_active: 1920 h_sync: 2020 h_sync_end
2052 h_blank_end 2184 h_border: 0 [ 18.941] (II) NOUVEAU(0): v_active:
1200 v_sync: 1202 v_sync_end 1208 v_blanking: 1235 v_border: 0 [ 18.941]
(II) NOUVEAU(0): Unknown vendor-specific block f [ 18.941] (II)
NOUVEAU(0): U0674�M1LW02 [ 18.941] (II) NOUVEAU(0): �����hH [ 18.941]
(II) NOUVEAU(0): EDID (in hex): [ 18.941] (II) NOUVEAU(0):
00ffffffffffff004d109f1300000000 [ 18.941] (II) NOUVEAU(0):
230d0103802115780aa8a098554d8f26 [ 18.941] (II) NOUVEAU(0):
1f505400000001010101010101010101 [ 18.941] (II) NOUVEAU(0):
0101010101012f3f800871b023406420 [ 18.941] (II) NOUVEAU(0):
26004bcf100000190000000f00000000 [ 18.941] (II) NOUVEAU(0):
00000000002892025000000000fe0055 [ 18.941] (II) NOUVEAU(0):
30363734029a4d314c573032000000fe [ 18.941] (II) NOUVEAU(0):
00c0b0a0908068480002010a202000a1 [ 18.941] (II) NOUVEAU(0): Printing
probed modes for output LVDS-1 [ 18.941] (II) NOUVEAU(0): Modeline
"1920x1200"x60.0 161.75 1920 2020 2052 2184 1200 1202 1208 1235 -hsync
-vsync (74.1 kHz eP) [ 18.941] (II) NOUVEAU(0): Modeline
"1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync
+vsync (74.6 kHz e) [ 18.941] (II) NOUVEAU(0): Modeline "1920x1080"x60.0
173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz
e) [ 18.941] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600 1712
1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz e) [ 18.941] (II)
NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050
1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 18.941] (II) NOUVEAU(0):
Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089
-hsync +vsync (65.3 kHz e) [ 18.941] (II) NOUVEAU(0): Modeline
"1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync
+vsync (63.7 kHz e) [ 18.941] (II) NOUVEAU(0): Modeline "1280x960"x59.9
101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e) [
18.941] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336
1520 864 867 871 897 -hsync +vsync (53.8 kHz e) [ 18.941] (II)
NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771
775 798 -hsync +vsync (47.8 kHz e) [ 18.942] (II) NOUVEAU(0): Modeline
"800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync
(37.4 kHz e) [ 18.942] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75
640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e) [ 18.942]
(II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403
413 417 -hsync +vsync (24.8 kHz e) [ 18.942] (II) NOUVEAU(0): Modeline
"640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0
kHz e) [ 18.942] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664
720 800 350 353 363 366 -hsync +vsync (21.9 kHz e) [ 18.950] (II)
NOUVEAU(0): EDID for output DVI-D-1 [ 18.950] (II) NOUVEAU(0): Output
VGA-1 disconnected [ 18.950] (II) NOUVEAU(0): Output LVDS-1 connected [
18.950] (II) NOUVEAU(0): Output DVI-D-1 disconnected [ 18.950] (II)
NOUVEAU(0): Using exact sizes for initial modes [ 18.950] (II)
NOUVEAU(0): Output LVDS-1 using initial mode 1920x1200 [ 18.950] (II)
NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise
stated. [ 18.950] (--) NOUVEAU(0): Virtual size is 1920x1200 (pitch 0) [
18.950] (**) NOUVEAU(0): Driver mode "1920x1200": 161.8 MHz (scaled from
0.0 MHz), 74.1 kHz, 60.0 Hz [ 18.950] (II) NOUVEAU(0): Modeline
"1920x1200"x60.0 161.75 1920 2020 2052 2184 1200 1202 1208 1235 -hsync
-vsync (74.1 kHz eP) [ 18.950] (**) NOUVEAU(0): Driver mode "1920x1200":
193.2 MHz (scaled from 0.0 MHz), 74.6 kHz, 59.9 Hz [ 18.950] (II)
NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200
1203 1209 1245 -hsync +vsync (74.6 kHz e) [ 18.950] (**) NOUVEAU(0):
Driver mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0
Hz [ 18.950] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920 2048
2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz e) [ 18.950] (**)
NOUVEAU(0): Driver mode "1600x1200": 161.0 MHz (scaled from 0.0 MHz),
74.5 kHz, 59.9 Hz [ 18.950] (II) NOUVEAU(0): Modeline "1600x1200"x59.9
161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz
e) [ 18.950] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled
from 0.0 MHz), 65.3 kHz, 60.0 Hz [ 18.950] (II) NOUVEAU(0): Modeline
"1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync
+vsync (65.3 kHz e) [ 18.950] (**) NOUVEAU(0): Driver mode "1400x1050":
121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz [ 18.950] (II)
NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050
1053 1057 1089 -hsync +vsync (65.3 kHz e) [ 18.950] (**) NOUVEAU(0):
Driver mode "1280x1024": 109.0 MHz (scaled from 0.0 MHz), 63.7 kHz, 59.9
Hz [ 18.950] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280 1368
1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz e) [ 18.950] (**)
NOUVEAU(0): Driver mode "1280x960": 101.2 MHz (scaled from 0.0 MHz),
59.7 kHz, 59.9 Hz [ 18.950] (II) NOUVEAU(0): Modeline "1280x960"x59.9
101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e) [
18.950] (**) NOUVEAU(0): Driver mode "1152x864": 81.8 MHz (scaled from
0.0 MHz), 53.8 kHz, 60.0 Hz [ 18.950] (II) NOUVEAU(0): Modeline
"1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync
(53.8 kHz e) [ 18.950] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz
(scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz [ 18.950] (II) NOUVEAU(0):
Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798
-hsync +vsync (47.8 kHz e) [ 18.950] (**) NOUVEAU(0): Driver mode
"800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz [ 18.950]
(II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603
607 624 -hsync +vsync (37.4 kHz e) [ 18.950] (**) NOUVEAU(0): Driver
mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz [
18.950] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800
480 483 487 500 -hsync +vsync (29.7 kHz e) [ 18.950] (**) NOUVEAU(0):
Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 18.950] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896
400 403 413 417 -hsync +vsync (24.8 kHz e) [ 18.950] (**) NOUVEAU(0):
Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 18.950] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800
400 403 409 417 -hsync +vsync (25.0 kHz e) [ 18.950] (**) NOUVEAU(0):
Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 18.950] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800
350 353 363 366 -hsync +vsync (21.9 kHz e) [ 18.950] (==) NOUVEAU(0):
DPI set to (96, 96) [ 18.950] (II) Loading sub module "fb" [ 18.950]
(II) LoadModule: "fb" [ 18.954] (II) Loading
/usr/lib/xorg/modules/libfb.so [ 18.967] (II) Module fb: vendor="X.Org
Foundation" [ 18.967] compiled for 1.12.3.902, module version = 1.0.0 [
18.967] ABI class: X.Org ANSI C Emulation, version 0.4 [ 18.967] (II)
Loading sub module "exa" [ 18.967] (II) LoadModule: "exa" [ 18.974] (II)
Loading /usr/lib/xorg/modules/libexa.so [ 19.105] (II) Module exa:
vendor="X.Org Foundation" [ 19.105] compiled for 1.12.3.902, module
version = 2.5.0 [ 19.105] ABI class: X.Org Video Driver, version 12.1 [
19.106] (II) Loading sub module "shadowfb" [ 19.106] (II) LoadModule:
"shadowfb" [ 19.106] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [
19.125] (II) Module shadowfb: vendor="X.Org Foundation" [ 19.125]
compiled for 1.12.3.902, module version = 1.0.0 [ 19.125] ABI class:
X.Org ANSI C Emulation, version 0.4 [ 19.125] (--) Depth 24 pixmap
format is 32 bpp [ 19.127] (II) NOUVEAU(0): Opened GPU channel 1 [
19.131] (II) NOUVEAU(0): [DRI2] Setup complete [ 19.131] (II)
NOUVEAU(0): [DRI2] DRI driver: nouveau_vieux [ 19.131] (II) NOUVEAU(0):
[DRI2] VDPAU driver: nouveau_vieux [ 19.135] (II) EXA(0): Driver
allocated offscreen pixmaps [ 19.135] (II) EXA(0): Driver registered
support for the following operations: [ 19.135] (II) Solid [ 19.135]
(II) Copy [ 19.135] (II) Composite (RENDER acceleration) [ 19.135] (II)
UploadToScreen [ 19.135] (II) DownloadFromScreen [ 19.135] (==)
NOUVEAU(0): Backing store disabled [ 19.135] (==) NOUVEAU(0): Silken
mouse enabled [ 19.135] (==) NOUVEAU(0): DPMS enabled [ 19.135] (II)
NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled
message. [ 19.136] (--) RandR disabled [ 19.136] (II) Initializing
built-in extension Generic Event Extension [ 19.136] (II) Initializing
built-in extension SHAPE [ 19.136] (II) Initializing built-in extension
MIT-SHM [ 19.136] (II) Initializing built-in extension XInputExtension [
19.136] (II) Initializing built-in extension XTEST [ 19.136] (II)
Initializing built-in extension BIG-REQUESTS [ 19.136] (II) Initializing
built-in extension SYNC [ 19.136] (II) Initializing built-in extension
XKEYBOARD [ 19.136] (II) Initializing built-in extension XC-MISC [
19.136] (II) Initializing built-in extension SECURITY [ 19.136] (II)
Initializing built-in extension XINERAMA [ 19.136] (II) Initializing
built-in extension XFIXES [ 19.136] (II) Initializing built-in extension
RENDER [ 19.136] (II) Initializing built-in extension RANDR [ 19.136]
(II) Initializing built-in extension COMPOSITE [ 19.136] (II)
Initializing built-in extension DAMAGE [ 19.142] (II) SELinux: Disabled
on system [ 19.553] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [
19.553] (II) AIGLX: enabled GLX_INTEL_swap_event [ 19.553] (II) AIGLX:
enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 19.553] (II)
AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 19.554]
(II) AIGLX: Loaded and initialized nouveau_vieux [ 19.554] (II) GLX:
Initialized DRI2 GL provider for screen 0 [ 19.594] (II) NOUVEAU(0):
NVEnterVT is called. [ 20.399] (II) NOUVEAU(0): Setting screen physical
size to 507 x 317 [ 20.399] resize called 1920 1200 [ 21.072] (II)
config/udev: Adding input device Video Bus (/dev/input/event4) [ 21.072]
(**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 21.072]
(II) LoadModule: "evdev" [ 21.073] (II) Loading
/usr/lib/xorg/modules/input/evdev_drv.so [ 21.221] (II) Module evdev:
vendor="X.Org Foundation" [ 21.222] compiled for 1.12.1, module version
= 2.7.0 [ 21.222] Module class: X.Org XInput Driver [ 21.222] ABI class:
X.Org XInput driver, version 16.0 [ 21.222] (II) Using input driver
'evdev' for 'Video Bus' [ 21.222] (**) Video Bus: always reports core
events [ 21.222] (**) evdev: Video Bus: Device: "/dev/input/event4" [
21.222] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 21.222] (--)
evdev: Video Bus: Found keys [ 21.222] (II) evdev: Video Bus:
Configuring as keyboard [ 21.232] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input4/event4"
[ 21.232] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD, id 6) [ 21.232] (**) Option "xkb_rules" "evdev" [ 21.232] (**)
Option "xkb_model" "pc105" [ 21.232] (**) Option "xkb_layout" "us" [
21.234] (II) config/udev: Adding input device Power Button
(/dev/input/event2) [ 21.234] (**) Power Button: Applying InputClass
"evdev keyboard catchall" [ 21.234] (II) Using input driver 'evdev' for
'Power Button' [ 21.234] (**) Power Button: always reports core events [
21.234] (**) evdev: Power Button: Device: "/dev/input/event2" [ 21.234]
(--) evdev: Power Button: Vendor 0 Product 0x1 [ 21.234] (--) evdev:
Power Button: Found keys [ 21.234] (II) evdev: Power Button: Configuring
as keyboard [ 21.235] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 21.235] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 7) [ 21.235] (**) Option "xkb_rules" "evdev" [
21.235] (**) Option "xkb_model" "pc105" [ 21.235] (**) Option
"xkb_layout" "us" [ 21.243] (II) config/udev: Adding input device Lid
Switch (/dev/input/event1) [ 21.243] (II) No input driver specified,
ignoring this device. [ 21.243] (II) This device may have been added
with another device file. [ 21.244] (II) config/udev: Adding input
device Sleep Button (/dev/input/event3) [ 21.244] (**) Sleep Button:
Applying InputClass "evdev keyboard catchall" [ 21.244] (II) Using input
driver 'evdev' for 'Sleep Button' [ 21.244] (**) Sleep Button: always
reports core events [ 21.244] (**) evdev: Sleep Button: Device:
"/dev/input/event3" [ 21.244] (--) evdev: Sleep Button: Vendor 0 Product
0x3 [ 21.244] (--) evdev: Sleep Button: Found keys [ 21.244] (II) evdev:
Sleep Button: Configuring as keyboard [ 21.244] (**) Option
"config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 21.244] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 8) [ 21.244] (**) Option "xkb_rules" "evdev" [
21.244] (**) Option "xkb_model" "pc105" [ 21.244] (**) Option
"xkb_layout" "us" [ 21.245] (II) config/udev: Adding input device AT
Translated Set 2 keyboard (/dev/input/event0) [ 21.245] (**) AT
Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.245] (II) Using input driver 'evdev' for 'AT Translated Set 2
keyboard' [ 21.245] (**) AT Translated Set 2 keyboard: always reports
core events [ 21.245] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event0" [ 21.245] (--) evdev: AT Translated Set 2 keyboard:
Vendor 0x1 Product 0x1 [ 21.245] (--) evdev: AT Translated Set 2
keyboard: Found keys [ 21.245] (II) evdev: AT Translated Set 2 keyboard:
Configuring as keyboard [ 21.245] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 21.245]
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard"
(type: KEYBOARD, id 9) [ 21.245] (**) Option "xkb_rules" "evdev" [
21.245] (**) Option "xkb_model" "pc105" [ 21.245] (**) Option
"xkb_layout" "us" [ 21.246] (II) config/udev: Adding input device
DualPoint Stick (/dev/input/event6) [ 21.246] (**) DualPoint Stick:
Applying InputClass "evdev pointer catchall" [ 21.246] (II) Using input
driver 'evdev' for 'DualPoint Stick' [ 21.246] (**) DualPoint Stick:
always reports core events [ 21.246] (**) evdev: DualPoint Stick:
Device: "/dev/input/event6" [ 21.246] (--) evdev: DualPoint Stick:
Vendor 0x2 Product 0x8 [ 21.246] (--) evdev: DualPoint Stick: Found 3
mouse buttons [ 21.246] (--) evdev: DualPoint Stick: Found relative axes
[ 21.246] (--) evdev: DualPoint Stick: Found x and y relative axes [
21.246] (II) evdev: DualPoint Stick: Configuring as mouse [ 21.247] (**)
evdev: DualPoint Stick: YAxisMapping: buttons 4 and 5 [ 21.247] (**)
evdev: DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200 [ 21.247] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input6/event6" [ 21.247]
(II) XINPUT: Adding extended input device "DualPoint Stick" (type:
MOUSE, id 10) [ 21.247] (II) evdev: DualPoint Stick: initialized for
relative axes. [ 21.247] (**) DualPoint Stick: (accel) keeping
acceleration scheme 1 [ 21.247] (**) DualPoint Stick: (accel)
acceleration profile 0 [ 21.247] (**) DualPoint Stick: (accel)
acceleration factor: 2.000 [ 21.247] (**) DualPoint Stick: (accel)
acceleration threshold: 4 [ 21.247] (II) config/udev: Adding input
device DualPoint Stick (/dev/input/mouse0) [ 21.247] (II) No input
driver specified, ignoring this device. [ 21.247] (II) This device may
have been added with another device file. [ 21.249] (II) config/udev:
Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event7)
[ 21.249] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass
"evdev touchpad catchall" [ 21.249] (**) AlpsPS/2 ALPS DualPoint
TouchPad: Applying InputClass "touchpad catchall" [ 21.249] (**)
AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad
buttons" [ 21.249] (II) LoadModule: "synaptics" [ 21.249] (II) Loading
/usr/lib/xorg/modules/input/synaptics_drv.so [ 21.322] (II) Module
synaptics: vendor="X.Org Foundation" [ 21.322] compiled for 1.12.1.902,
module version = 1.6.2 [ 21.322] Module class: X.Org XInput Driver [
21.322] ABI class: X.Org XInput driver, version 16.0 [ 21.322] (II)
Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad' [
21.322] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core
events [ 21.322] (**) Option "Device" "/dev/input/event7" [ 21.323] (--)
synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023 [
21.323] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0
- 767 [ 21.323] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad:
pressure range 0 - 127 [ 21.323] (II) synaptics: AlpsPS/2 ALPS DualPoint
TouchPad: device does not report finger width. [ 21.323] (--) synaptics:
AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle [ 21.323]
(--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[ 21.323] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid
finger width range. defaulting to 0 - 15 [ 21.323] (--) synaptics:
AlpsPS/2 ALPS DualPoint TouchPad: touchpad found [ 21.323] (**) AlpsPS/2
ALPS DualPoint TouchPad: always reports core events [ 21.323] (**)
Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input7/event7" [ 21.323]
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint
TouchPad" (type: TOUCHPAD, id 11) [ 21.323] (**) synaptics: AlpsPS/2
ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration
2.5 [ 21.324] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed
is now 1.75 [ 21.324] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad:
AccelFactor is now 0.156 [ 21.324] (**) AlpsPS/2 ALPS DualPoint
TouchPad: (accel) keeping acceleration scheme 1 [ 21.324] (**) AlpsPS/2
ALPS DualPoint TouchPad: (accel) acceleration profile 1 [ 21.324] (**)
AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000 [
21.325] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration
threshold: 4 [ 21.325] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad:
touchpad found [ 21.325] (II) config/udev: Adding input device AlpsPS/2
ALPS DualPoint TouchPad (/dev/input/mouse1) [ 21.326] (**) AlpsPS/2 ALPS
DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore
duplicates" [ 21.327] (II) config/udev: Adding input device PC Speaker
(/dev/input/event5) [ 21.327] (II) No input driver specified, ignoring
this device. [ 21.327] (II) This device may have been added with another
device file. [ 21.333] (II) config/udev: Adding input device ACPI
Virtual Keyboard Device (/dev/input/event8) [ 21.333] (**) ACPI Virtual
Keyboard Device: Applying InputClass "evdev keyboard catchall" [ 21.333]
(II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device' [
21.333] (**) ACPI Virtual Keyboard Device: always reports core events [
21.333] (**) evdev: ACPI Virtual Keyboard Device: Device:
"/dev/input/event8" [ 21.333] (--) evdev: ACPI Virtual Keyboard Device:
Vendor 0 Product 0 [ 21.333] (--) evdev: ACPI Virtual Keyboard Device:
Found keys [ 21.333] (II) evdev: ACPI Virtual Keyboard Device:
Configuring as keyboard [ 21.333] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input8/event8" [ 21.333] (II) XINPUT:
Adding extended input device "ACPI Virtual Keyboard Device" (type:
KEYBOARD, id 12) [ 21.333] (**) Option "xkb_rules" "evdev" [ 21.333]
(**) Option "xkb_model" "pc105" [ 21.333] (**) Option "xkb_layout" "us"
[ 63.977] (II) NOUVEAU(0): EDID vendor "SHP", prod id 5023 [ 63.977]
(II) NOUVEAU(0): Printing DDC gathered Modelines: [ 63.977] (II)
NOUVEAU(0): Modeline "1920x1200"x0.0 161.75 1920 2020 2052 2184 1200
1202 1208 1235 -hsync -vsync (74.1 kHz eP) [ 70.743] (II) NOUVEAU(0):
EDID vendor "SHP", prod id 5023 [ 70.743] (II) NOUVEAU(0): Printing DDC
gathered Modelines: [ 70.743] (II) NOUVEAU(0): Modeline "1920x1200"x0.0
161.75 1920 2020 2052 2184 1200 1202 1208 1235 -hsync -vsync (74.1 kHz
eP) [ 72.845] (II) NOUVEAU(0): EDID vendor "SHP", prod id 5023 [ 73.023]
(II) NOUVEAU(0): Printing DDC gathered Modelines: [ 73.023] (II)
NOUVEAU(0): Modeline "1920x1200"x0.0 161.75 1920 2020 2052 2184 1200
1202 1208 1235 -hsync -vsync (74.1 kHz eP) [ 237.868] (II) AIGLX:
Suspending AIGLX clients for VT switch [ 237.868] (II) NOUVEAU(0):
NVLeaveVT is called.
udev information: ----------------- P:
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input4
E:
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input4
E: EV=3 E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-LNXVIDEO:00 E:
ID_PATH_TAG=acpi-LNXVIDEO_00 E: KEY=3e000b 0 0 0 0 0 0 0 E:
MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus" E: PHYS="LNXVIDEO/video/input0" E: PRODUCT=19/0/6/0
E: PROP=0 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=4107632
P:
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input4/event4
N: input/event4 E: BACKSPACE=guess E: DEVNAME=/dev/input/event4 E:
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/LNXVIDEO:00/input/input4/event4
E: DMI_VENDOR=Dell Computer Corporation E: ID_INPUT=1 E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00 E: ID_PATH_TAG=acpi-LNXVIDEO_00 E: MAJOR=13
E: MINOR=68 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=4233832
E: XKBLAYOUT=us E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 E:
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 E: EV=3
E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0C:00 E:
ID_PATH_TAG=acpi-PNP0C0C_00 E: KEY=100000 0 0 0 E:
MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw E: NAME="Power
Button" E: PHYS="PNP0C0C/button/input0" E: PRODUCT=19/0/1/0 E: PROP=0 E:
SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=4102497
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2 N:
input/event2 E: BACKSPACE=guess E: DEVNAME=/dev/input/event2 E:
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2 E:
DMI_VENDOR=Dell Computer Corporation E: ID_INPUT=1 E: ID_INPUT_KEY=1 E:
ID_PATH=acpi-PNP0C0C:00 E: ID_PATH_TAG=acpi-PNP0C0C_00 E: MAJOR=13 E:
MINOR=66 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=4233358 E:
XKBLAYOUT=us E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 E:
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 E: EV=21
E: ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0, E: NAME="Lid
Switch" E: PHYS="PNP0C0D/button/input0" E: PRODUCT=19/0/5/0 E: PROP=0 E:
SUBSYSTEM=input E: SW=1 E: UDEV_LOG=3 E: USEC_INITIALIZED=4044571
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1/event1 N:
input/event1 E: DEVNAME=/dev/input/event1 E:
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1/event1 E:
ID_INPUT=1 E: ID_PATH=acpi-PNP0C0D:00 E: ID_PATH_TAG=acpi-PNP0C0D_00 E:
MAJOR=13 E: MINOR=65 E: SUBSYSTEM=input E: UDEV_LOG=3 E:
USEC_INITIALIZED=4189042
P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 E:
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 E: EV=3
E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_PATH=acpi-PNP0C0E:00 E:
ID_PATH_TAG=acpi-PNP0C0E_00 E: KEY=4000 0 0 0 0 E:
MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw E: NAME="Sleep
Button" E: PHYS="PNP0C0E/button/input0" E: PRODUCT=19/0/3/0 E: PROP=0 E:
SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=4103223
P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3 N:
input/event3 E: BACKSPACE=guess E: DEVNAME=/dev/input/event3 E:
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3 E:
DMI_VENDOR=Dell Computer Corporation E: ID_INPUT=1 E: ID_INPUT_KEY=1 E:
ID_PATH=acpi-PNP0C0E:00 E: ID_PATH_TAG=acpi-PNP0C0E_00 E: MAJOR=13 E:
MINOR=67 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=4232931 E:
XKBLAYOUT=us E: XKBMODEL=pc105
P: /devices/platform/i8042/serio0/input/input0 E:
DEVPATH=/devices/platform/i8042/serio0/input/input0 E: EV=120013 E:
ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E:
ID_PATH=platform-i8042-serio-0 E: ID_PATH_TAG=platform-i8042-serio-0 E:
ID_SERIAL=noserial E: KEY=1100f 2902002 8380307c f910f001 feffffdf
ffefffff ffffffff fffffffe E: LED=7 E:
MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8D,8E,8F,94,98,9B,9C,9D,9E,9F,A2,A3,A4,A5,A6,AC,AD,B7,B8,B9,BF,C1,CD,D4,D7,D9,E0,E1,E2,E3,EC,F0,ram4,l0,1,2,sfw
E: MSC=10 E: NAME="AT Translated Set 2 keyboard" E:
PHYS="isa0060/serio0/input0" E: PRODUCT=11/1/1/ab41 E: PROP=0 E:
SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=3956506
P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S:
input/by-path/platform-i8042-serio-0-event-kbd E: BACKSPACE=guess E:
DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd E:
DEVNAME=/dev/input/event0 E:
DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E:
DMI_VENDOR=Dell Computer Corporation E: ID_INPUT=1 E: ID_INPUT_KEY=1 E:
ID_INPUT_KEYBOARD=1 E: ID_PATH=platform-i8042-serio-0 E:
ID_PATH_TAG=platform-i8042-serio-0 E: ID_SERIAL=noserial E: MAJOR=13 E:
MINOR=64 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=4232382 E:
XKBLAYOUT=us E: XKBMODEL=pc105
P: /devices/platform/i8042/serio1/input/input6 E:
DEVPATH=/devices/platform/i8042/serio1/input/input6 E: EV=7 E:
ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-1 E:
ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: KEY=70000 0
0 0 0 0 0 0 0 E:
MODALIAS=input:b0011v0002p0008e0000-e0,1,2,k110,111,112,r0,1,amlsfw E:
NAME="DualPoint Stick" E: PHYS="isa0060/serio1/input1" E:
PRODUCT=11/2/8/0 E: PROP=0 E: REL=3 E: SUBSYSTEM=input E: UDEV_LOG=3 E:
USEC_INITIALIZED=5350151
P: /devices/platform/i8042/serio1/input/input6/event6 N: input/event6 S:
input/by-path/platform-i8042-serio-1-event-mouse E:
DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse E:
DEVNAME=/dev/input/event6 E:
DEVPATH=/devices/platform/i8042/serio1/input/input6/event6 E: ID_INPUT=1
E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-1 E:
ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E:
MINOR=70 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5362713
P: /devices/platform/i8042/serio1/input/input6/mouse0 N: input/mouse0 S:
input/by-path/platform-i8042-serio-1-mouse E:
DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse E:
DEVNAME=/dev/input/mouse0 E:
DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse0 E: ID_INPUT=1
E: ID_INPUT_MOUSE=1 E: ID_PATH=platform-i8042-serio-1 E:
ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E:
MINOR=32 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5364139
P: /devices/platform/i8042/serio1/input/input7 E: ABS=1000003 E:
DEVPATH=/devices/platform/i8042/serio1/input/input7 E: EV=b E:
ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-1 E:
ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: KEY=420 0
70000 0 0 0 0 0 0 0 0 E:
MODALIAS=input:b0011v0002p0008e6337-e0,1,3,k110,111,112,145,14A,ra0,1,18,mlsfw
E: NAME="AlpsPS/2 ALPS DualPoint TouchPad" E:
PHYS="isa0060/serio1/input0" E: PRODUCT=11/2/8/6337 E: PROP=0 E:
SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5374637
P: /devices/platform/i8042/serio1/input/input7/event7 N: input/event7 S:
input/by-path/platform-i8042-serio-1-event-mouse E:
DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse E:
DEVNAME=/dev/input/event7 E:
DEVPATH=/devices/platform/i8042/serio1/input/input7/event7 E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-1 E:
ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E:
MINOR=71 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5423285
P: /devices/platform/i8042/serio1/input/input7/mouse1 N: input/mouse1 S:
input/by-path/platform-i8042-serio-1-mouse E:
DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse E:
DEVNAME=/dev/input/mouse1 E:
DEVPATH=/devices/platform/i8042/serio1/input/input7/mouse1 E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1 E: ID_PATH=platform-i8042-serio-1 E:
ID_PATH_TAG=platform-i8042-serio-1 E: ID_SERIAL=noserial E: MAJOR=13 E:
MINOR=33 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=5425397
P: /devices/platform/pcspkr/input/input5 E:
DEVPATH=/devices/platform/pcspkr/input/input5 E: EV=40001 E: ID_INPUT=1
E: ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E:
ID_SERIAL=noserial E:
MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw E: NAME="PC
Speaker" E: PHYS="isa0061/input0" E: PRODUCT=10/1f/1/100 E: PROP=0 E:
SND=6 E: SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=4132637
P: /devices/platform/pcspkr/input/input5/event5 N: input/event5 S:
input/by-path/platform-pcspkr-event-spkr E:
DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr E:
DEVNAME=/dev/input/event5 E:
DEVPATH=/devices/platform/pcspkr/input/input5/event5 E: ID_INPUT=1 E:
ID_PATH=platform-pcspkr E: ID_PATH_TAG=platform-pcspkr E:
ID_SERIAL=noserial E: MAJOR=13 E: MINOR=69 E: SUBSYSTEM=input E:
UDEV_LOG=3 E: USEC_INITIALIZED=4193217
P: /devices/virtual/input/input8 E:
DEVPATH=/devices/virtual/input/input8 E: EV=3 E: ID_INPUT=1 E:
ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E:
KEY=ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
fffffffe E:
MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw
E: NAME="ACPI Virtual Keyboard Device" E: PRODUCT=3/0/0/4 E: PROP=0 E:
SUBSYSTEM=input E: UDEV_LOG=3 E: USEC_INITIALIZED=14102070
P: /devices/virtual/input/input8/event8 N: input/event8 E:
BACKSPACE=guess E: DEVNAME=/dev/input/event8 E:
DEVPATH=/devices/virtual/input/input8/event8 E: DMI_VENDOR=Dell Computer
Corporation E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E:
ID_SERIAL=noserial E: MAJOR=13 E: MINOR=72 E: SUBSYSTEM=input E:
UDEV_LOG=3 E: USEC_INITIALIZED=14112621 E: XKBLAYOUT=us E:
XKBMODEL=pc105
DRM Information from dmesg: --------------------------- [ 0.089427]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 1.151568]
Linux agpgart interface v0.103 [ 1.151737] agpgart-intel 0000:00:00.0:
Intel 855PM Chipset [ 1.158436] agpgart-intel 0000:00:00.0: AGP aperture
is 128M @ 0xe8000000 [ 17.348223] [drm] Initialized drm 1.1.0 20060810 [
17.463314] [drm] nouveau 0000:01:00.0: Detected an NV20 generation card
(0x028600a2) [ 17.463585] [drm] nouveau 0000:01:00.0: Attempting to load
BIOS image from PRAMIN [ 17.513604] [drm] nouveau 0000:01:00.0: ...
appears to be valid [ 17.514765] [drm] nouveau 0000:01:00.0: BMP BIOS
found [ 17.514773] [drm] nouveau 0000:01:00.0: BMP version 5.39 [
17.514784] [drm] nouveau 0000:01:00.0: Bios version 04.28.20.31 [
17.514794] [drm] nouveau 0000:01:00.0: Found Display Configuration Block
version 2.2 [ 17.514806] [drm] nouveau 0000:01:00.0: Raw DCB entry 0:
01000100 000088b8 [ 17.514817] [drm] nouveau 0000:01:00.0: Raw DCB entry
1: 02110223 00000064 [ 17.514826] [drm] nouveau 0000:01:00.0: Unknown
LVDS configuration bits, please report [ 17.514838] [drm] nouveau
0000:01:00.0: Raw DCB entry 2: 01120312 00000040 [ 17.514848] [drm]
nouveau 0000:01:00.0: Raw DCB entry 3: 01130321 00000001 [ 17.515962]
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE73D
[ 17.516039] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at
offset 0xEA40 [ 17.518143] [drm] nouveau 0000:01:00.0: Parsing VBIOS
init table 2 at offset 0xE829 [ 17.518211] [drm] nouveau 0000:01:00.0:
Parsing VBIOS init table 3 at offset 0xEFCA [ 17.518226] [drm] nouveau
0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEFE7 [ 17.518240]
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xE980
[ 17.519595] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at
offset 0xE9DB [ 17.519612] [drm] nouveau 0000:01:00.0: BIOS FP mode:
1401x1050 (108000kHz pixel clock) [ 17.551761] [drm] nouveau
0000:01:00.0: 0 available performance level(s) [ 17.551777] [drm]
nouveau 0000:01:00.0: c: core 195MHz memory 405MHz [ 17.552050] [drm]
nouveau 0000:01:00.0: Detected 64MiB VRAM [ 17.552396] agpgart-intel
0000:00:00.0: AGP 2.0 bridge [ 17.552421] agpgart-intel 0000:00:00.0:
putting AGP V2 device into 4x mode [ 17.552461] nouveau 0000:01:00.0:
putting AGP V2 device into 4x mode [ 17.552486] [drm] nouveau
0000:01:00.0: 128 MiB GART (aperture) [ 17.552681] [drm] nouveau
0000:01:00.0: Saving VGA fonts [ 17.676065] [drm] nouveau 0000:01:00.0:
Detected TV encoder: ch7006 [ 17.812461] [drm] Supports vblank timestamp
caching Rev 1 (10.10.2010). [ 17.812467] [drm] No driver support for
vblank timestamp query. [ 17.812477] [drm] nouveau 0000:01:00.0: Setting
dpms mode 3 on vga encoder (output 0) [ 17.812484] [drm] nouveau
0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1) [
17.812490] [drm] nouveau 0000:01:00.0: Calling LVDS script 1: [
17.812496] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [
17.812501] [drm] nouveau 0000:01:00.0: 0xDACF: Parsing digital output
script table [ 18.377942] [drm] nouveau 0000:01:00.0: Setting dpms mode
3 on tmds encoder (output 2) [ 18.377947] [drm] nouveau 0000:01:00.0:
Setting dpms mode 3 on TV encoder (output 3) [ 18.552210] [drm] nouveau
0000:01:00.0: allocated 1920x1200 fb: 0x49000, bo f709b400 [ 18.553708]
drm: registered panic notifier [ 18.553720] [drm] Initialized nouveau
1.0.0 20120316 for 0000:01:00.0 on minor 0 [ 19.594651] [drm] nouveau
0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 19.605950]
[drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 19.605956] [drm]
nouveau 0000:01:00.0: 0xDACF: Parsing digital output script table [
20.171409] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [
20.171414] [drm] nouveau 0000:01:00.0: 0xDAFE: Parsing digital output
script table [ 20.187302] [drm] nouveau 0000:01:00.0: Setting dpms mode
0 on lvds encoder (output 1) [ 20.187305] [drm] nouveau 0000:01:00.0:
Calling LVDS script 5: [ 20.187310] [drm] nouveau 0000:01:00.0: 0xDA48:
Parsing digital output script table [ 20.393657] [drm] nouveau
0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output B [
20.399279] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder
(output 3) [ 93.364028] [drm] nouveau 0000:01:00.0: fail ttm_validate [
93.364042] [drm] nouveau 0000:01:00.0: validate vram_list [ 93.366783]
[drm] nouveau 0000:01:00.0: validate: -16 [ 96.380031] [drm] nouveau
0000:01:00.0: reloc wait_idle failed: -16 [ 96.380045] [drm] nouveau
0000:01:00.0: reloc apply: -16 [ 99.392024] [drm] nouveau 0000:01:00.0:
reloc wait_idle failed: -16 [ 99.392031] [drm] nouveau 0000:01:00.0:
reloc apply: -16 [ 102.440028] [drm] nouveau 0000:01:00.0: reloc
wait_idle failed: -16 [ 102.440042] [drm] nouveau 0000:01:00.0: reloc
apply: -16 [ 105.504031] [drm] nouveau 0000:01:00.0: reloc wait_idle
failed: -16 [ 105.504044] [drm] nouveau 0000:01:00.0: reloc apply: -16 [
108.552030] [drm] nouveau 0000:01:00.0: reloc wait_idle failed: -16 [
108.552044] [drm] nouveau 0000:01:00.0: reloc apply: -16 [ 115.532033]
[drm] nouveau 0000:01:00.0: reloc wait_idle failed: -16 [ 115.532046]
[drm] nouveau 0000:01:00.0: reloc apply: -16 [ 118.532023] [drm] nouveau
0000:01:00.0: Failed to idle channel 2. [ 118.595546] [drm] nouveau
0000:01:00.0: PFIFO_DMA_PUSHER - Ch 2 Get 0x00743188 Put 0x0074325c
State 0xc0000054 (err: MEM_FAULT) Push 0x00001000 [ 118.595555] [drm]
nouveau 0000:01:00.0: PFIFO_INTR 0x00010000 - Ch 2 [ 121.592019] [drm]
nouveau 0000:01:00.0: reloc wait_idle failed: -16 [ 121.592025] [drm]
nouveau 0000:01:00.0: reloc apply: -16 [ 124.616025] [drm] nouveau
0000:01:00.0: reloc wait_idle failed: -16 [ 124.616032] [drm] nouveau
0000:01:00.0: reloc apply: -16 [ 127.712025] [drm] nouveau 0000:01:00.0:
reloc wait_idle failed: -16 [ 127.712032] [drm] nouveau 0000:01:00.0:
reloc apply: -16 [ 130.732023] [drm] nouveau 0000:01:00.0: reloc
wait_idle failed: -16 [ 130.732030] [drm] nouveau 0000:01:00.0: reloc
apply: -16 [ 133.748024] [drm] nouveau 0000:01:00.0: reloc wait_idle
failed: -16 [ 133.748031] [drm] nouveau 0000:01:00.0: reloc apply: -16 [
136.780025] [drm] nouveau 0000:01:00.0: reloc wait_idle failed: -16 [
136.780032] [drm] nouveau 0000:01:00.0: reloc apply: -16 [ 139.800025]
[drm] nouveau 0000:01:00.0: reloc wait_idle failed: -16 [ 139.800031]
[drm] nouveau 0000:01:00.0: reloc apply: -16 [ 142.836024] [drm] nouveau
0000:01:00.0: reloc wait_idle failed: -16 [ 142.836030] [drm] nouveau
0000:01:00.0: reloc apply: -16 [ 145.840024] [drm] nouveau 0000:01:00.0:
reloc wait_idle failed: -16 [ 145.840030] [drm] nouveau 0000:01:00.0:
reloc apply: -16 [ 148.852022] [drm] nouveau 0000:01:00.0: reloc
wait_idle failed: -16 [ 148.852028] [drm] nouveau 0000:01:00.0: reloc
apply: -16 [ 151.856025] [drm] nouveau 0000:01:00.0: reloc wait_idle
failed: -16 [ 151.856031] [drm] nouveau 0000:01:00.0: reloc apply: -16 [
154.864023] [drm] nouveau 0000:01:00.0: reloc wait_idle failed: -16 [
154.864030] [drm] nouveau 0000:01:00.0: reloc apply: -16 [ 157.896024]
[drm] nouveau 0000:01:00.0: reloc wait_idle failed: -16 [ 157.896031]
[drm] nouveau 0000:01:00.0: reloc apply: -16 [ 161.156024] [drm] nouveau
0000:01:00.0: Failed to idle channel 2. [ 164.156023] [drm] nouveau
0000:01:00.0: reloc wait_idle failed: -16 [ 164.156029] [drm] nouveau
0000:01:00.0: reloc apply: -16 [ 167.156021] [drm] nouveau 0000:01:00.0:
reloc wait_idle failed: -16 [ 167.156027] [drm] nouveau 0000:01:00.0:
reloc apply: -16 [ 170.156018] [drm] nouveau 0000:01:00.0: Failed to
idle channel 2. [ 173.156020] [drm] nouveau 0000:01:00.0: Failed to idle
channel 2. [ 176.160023] [drm] nouveau 0000:01:00.0: reloc wait_idle
failed: -16 [ 176.160029] [drm] nouveau 0000:01:00.0: reloc apply: -16 [
179.160022] [drm] nouveau 0000:01:00.0: Failed to idle channel 2. [
182.160021] [drm] nouveau 0000:01:00.0: reloc wait_idle failed: -16 [
182.160026] [drm] nouveau 0000:01:00.0: reloc apply: -16 [ 185.160019]
[drm] nouveau 0000:01:00.0: Failed to idle channel 2. [ 188.160018]
[drm] nouveau 0000:01:00.0: Failed to idle channel 2. [ 188.167128]
kernel BUG at
/build/buildd-linux_3.2.23-1-i386-qhsd1M/linux-3.2.23/drivers/gpu/drm/nouveau/nouveau_fence.c:155!
[ 188.167301] Modules linked in: ip6table_filter ip6_tables
iptable_filter ip_tables ebtable_nat ebtables x_tables ppdev lp bnep
rfcomm bluetooth ch7006 nouveau mxm_wmi wmi ttm drm_kms_helper drm
i2c_algo_bit i2c_core binfmt_misc uinput nfsd nfs nfs_acl auth_rpcgss
fscache lockd sunrpc nls_utf8 nls_cp437 vfat fat loop joydev iTCO_wdt
iTCO_vendor_support ipw2100 libipw lib80211 cfg80211 snd_intel8x0
snd_intel8x0m snd_ac97_codec rfkill snd_pcm rng_core psmouse
snd_page_alloc yenta_socket dcdbas serio_raw evdev snd_seq
snd_seq_device snd_timer pcmcia_rsrc pcspkr snd parport_pc soundcore
parport acpi_cpufreq mperf ac97_bus irda crc_ccitt video ac processor
battery button shpchp ext4 crc16 jbd2 mbcache dm_mod sg sr_mod sd_mod
cdrom crc_t10dif ata_generic ata_piix libata uhci_hcd firewire_ohci
ehci_hcd scsi_mod firewire_core usbcore b44 ssb mmc_core mii pcmcia
thermal thermal_sys crc_itu_t pcmcia_core usb_common [last unloaded:
scsi_wait_scan] [ 188.168014] [<f8398bfd>] ? drm_ioctl+0x237/0x2ee [drm]
[ 188.168014] [<f83989c6>] ? drm_copy_field+0x48/0x48 [drm] [
188.168014] [drm] nouveau 0000:01:00.0: GPU lockup - switching to
software fbcon [ 188.246898] [drm] nouveau 0000:01:00.0: Setting dpms
mode 3 on lvds encoder (output 1) [ 188.246965] [drm] nouveau
0000:01:00.0: Calling LVDS script 6: [ 188.247017] [drm] nouveau
0000:01:00.0: 0xDACF: Parsing digital output script table [ 188.250854]
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[ 188.250854] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [
188.250854] [drm] nouveau 0000:01:00.0: 0xDAFE: Parsing digital output
script table [ 188.250854] [drm] nouveau 0000:01:00.0: Setting dpms mode
0 on lvds encoder (output 1) [ 188.250854] [drm] nouveau 0000:01:00.0:
Calling LVDS script 5: [ 188.250854] [drm] nouveau 0000:01:00.0: 0xDA48:
Parsing digital output script table [ 188.250854] [drm] nouveau
0000:01:00.0: Output LVDS-1 is running on CRTC 1 using output B [
188.250854] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV
encoder (output 3)
-- System Information: Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing') Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-486 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8
(charmap=UTF-8) Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-nouveau depends on: ii libc6
2.13-35 ii libdrm2 2.4.33-3 ii libudev0 175-7 ii xserver-xorg-core
[xorg-video-abi-12] 2:1.12.3.902-1
Versions of packages xserver-xorg-video-nouveau recommends: ii
libgl1-mesa-dri 8.0.4-2
xserver-xorg-video-nouveau suggests no packages.
-- no debconf information
--
eclectic@sdf.lonestar.org
SDF Public Access UNIX System - http://sdf.lonestar.org
Reply to: