Bug#689178: xserver-xorg-video-nouveau: No support for modern nVidia cards (GT 610) - System unusable!
Package: xserver-xorg-video-nouveau
Version: 1:1.0.1-3
Severity: critical
Justification: breaks the whole system
The Debian installer installs the nouveau driver by default. But this driver
doesn't appear have support for my new nVidia GT 610. When the installer is
done it becomes useless after booting into the new system. It freezes and can't
go to any run level so I can't debug anything either. The only thing that works
is to boot Debian with the rescue mode and install the non-free drivers.
A solution for this could be the option to install non-free drivers if the
installer detects an unsupported video card. This saves allot of steps with the
recovery mode.
The error that is displayed is the following one:
http://www3.picturepush.com/photo/a/10387406/1024/Anonymous/nouveau-crash.png
Nothing is possible at that point, the system is fully frozen.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Sep 16 00:20 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2044664 Aug 21 21:55 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0162] (rev 09)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-10) ) #1 SMP Debian 3.2.30-1
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 41047 Sep 29 19:34 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 7.120]
X.Org X Server 1.12.3.902 (1.12.4 RC 2)
Release Date: 2012-08-19
[ 7.120] X Protocol Version 11, Revision 0
[ 7.120] Build Operating System: Linux 3.2.0-3-amd64 x86_64 Debian
[ 7.120] Current Operating System: Linux intrepid 3.2.0-4-amd64 #1 SMP Debian 3.2.30-1 x86_64
[ 7.120] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=6a3e842d-f85d-4220-b315-b34cce3e23ee ro ipv6.disable=1 quiet
[ 7.120] Build Date: 21 August 2012 07:36:50PM
[ 7.120] xorg-server 2:1.12.3.902-1 (Julien Cristau <jcristau@debian.org>)
[ 7.120] Current version of pixman: 0.26.0
[ 7.120] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.120] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.120] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 29 19:34:11 2012
[ 7.122] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 7.123] (==) No Layout section. Using the first Screen section.
[ 7.123] (==) No screen section available. Using defaults.
[ 7.123] (**) |-->Screen "Default Screen Section" (0)
[ 7.123] (**) | |-->Monitor "<default monitor>"
[ 7.123] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.123] (==) Automatically adding devices
[ 7.123] (==) Automatically enabling devices
[ 7.123] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 7.123] Entry deleted from font path.
[ 7.123] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 7.123] Entry deleted from font path.
[ 7.123] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 7.123] Entry deleted from font path.
[ 7.123] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 7.123] Entry deleted from font path.
[ 7.123] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 7.123] Entry deleted from font path.
[ 7.123] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 7.123] Entry deleted from font path.
[ 7.123] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 7.123] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.123] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.123] (II) Loader magic: 0x7fad5a1dbae0
[ 7.123] (II) Module ABI versions:
[ 7.123] X.Org ANSI C Emulation: 0.4
[ 7.124] X.Org Video Driver: 12.1
[ 7.124] X.Org XInput driver : 16.0
[ 7.124] X.Org Server Extension : 6.0
[ 7.124] (--) PCI:*(0:0:2:0) 8086:0162:1043:84ca rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 7.124] (II) Open ACPI successful (/var/run/acpid.socket)
[ 7.124] (II) LoadModule: "extmod"
[ 7.125] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 7.125] (II) Module extmod: vendor="X.Org Foundation"
[ 7.125] compiled for 1.12.3.902, module version = 1.0.0
[ 7.125] Module class: X.Org Server Extension
[ 7.125] ABI class: X.Org Server Extension, version 6.0
[ 7.125] (II) Loading extension SELinux
[ 7.125] (II) Loading extension MIT-SCREEN-SAVER
[ 7.125] (II) Loading extension XFree86-VidModeExtension
[ 7.125] (II) Loading extension XFree86-DGA
[ 7.125] (II) Loading extension DPMS
[ 7.125] (II) Loading extension XVideo
[ 7.125] (II) Loading extension XVideo-MotionCompensation
[ 7.125] (II) Loading extension X-Resource
[ 7.125] (II) LoadModule: "dbe"
[ 7.126] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 7.126] (II) Module dbe: vendor="X.Org Foundation"
[ 7.126] compiled for 1.12.3.902, module version = 1.0.0
[ 7.126] Module class: X.Org Server Extension
[ 7.126] ABI class: X.Org Server Extension, version 6.0
[ 7.126] (II) Loading extension DOUBLE-BUFFER
[ 7.126] (II) LoadModule: "glx"
[ 7.126] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.128] (II) Module glx: vendor="X.Org Foundation"
[ 7.128] compiled for 1.12.3.902, module version = 1.0.0
[ 7.128] ABI class: X.Org Server Extension, version 6.0
[ 7.128] (==) AIGLX enabled
[ 7.128] (II) Loading extension GLX
[ 7.128] (II) LoadModule: "record"
[ 7.128] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 7.128] (II) Module record: vendor="X.Org Foundation"
[ 7.128] compiled for 1.12.3.902, module version = 1.13.0
[ 7.128] Module class: X.Org Server Extension
[ 7.128] ABI class: X.Org Server Extension, version 6.0
[ 7.128] (II) Loading extension RECORD
[ 7.128] (II) LoadModule: "dri"
[ 7.128] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 7.129] (II) Module dri: vendor="X.Org Foundation"
[ 7.129] compiled for 1.12.3.902, module version = 1.0.0
[ 7.129] ABI class: X.Org Server Extension, version 6.0
[ 7.129] (II) Loading extension XFree86-DRI
[ 7.129] (II) LoadModule: "dri2"
[ 7.129] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 7.129] (II) Module dri2: vendor="X.Org Foundation"
[ 7.129] compiled for 1.12.3.902, module version = 1.2.0
[ 7.129] ABI class: X.Org Server Extension, version 6.0
[ 7.130] (II) Loading extension DRI2
[ 7.130] (==) Matched intel as autoconfigured driver 0
[ 7.130] (==) Matched vesa as autoconfigured driver 1
[ 7.130] (==) Matched fbdev as autoconfigured driver 2
[ 7.130] (==) Assigned the driver to the xf86ConfigLayout
[ 7.130] (II) LoadModule: "intel"
[ 7.130] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 7.132] (II) Module intel: vendor="X.Org Foundation"
[ 7.132] compiled for 1.12.3.902, module version = 2.20.5
[ 7.132] Module class: X.Org Video Driver
[ 7.132] ABI class: X.Org Video Driver, version 12.1
[ 7.132] (II) LoadModule: "vesa"
[ 7.132] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.132] (II) Module vesa: vendor="X.Org Foundation"
[ 7.132] compiled for 1.12.1, module version = 2.3.1
[ 7.132] Module class: X.Org Video Driver
[ 7.132] ABI class: X.Org Video Driver, version 12.0
[ 7.132] (II) LoadModule: "fbdev"
[ 7.132] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 7.133] (II) Module fbdev: vendor="X.Org Foundation"
[ 7.133] compiled for 1.12.1, module version = 0.4.2
[ 7.133] ABI class: X.Org Video Driver, version 12.0
[ 7.133] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+)
[ 7.133] (II) VESA: driver for VESA chipsets: vesa
[ 7.133] (II) FBDEV: driver for framebuffer: fbdev
[ 7.133] (++) using VT number 7
[ 7.139] drmOpenDevice: node name is /dev/dri/card0
[ 7.139] drmOpenDevice: open result is 8, (OK)
[ 7.140] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 7.140] drmOpenDevice: node name is /dev/dri/card0
[ 7.140] drmOpenDevice: open result is 8, (OK)
[ 7.140] drmOpenByBusid: drmOpenMinor returns 8
[ 7.140] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 7.140] (WW) Falling back to old probe method for vesa
[ 7.140] (WW) Falling back to old probe method for fbdev
[ 7.140] (II) Loading sub module "fbdevhw"
[ 7.140] (II) LoadModule: "fbdevhw"
[ 7.140] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 7.140] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 7.140] compiled for 1.12.3.902, module version = 0.0.2
[ 7.140] ABI class: X.Org Video Driver, version 12.1
[ 7.140] drmOpenDevice: node name is /dev/dri/card0
[ 7.140] drmOpenDevice: open result is 9, (OK)
[ 7.140] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 7.140] drmOpenDevice: node name is /dev/dri/card0
[ 7.140] drmOpenDevice: open result is 9, (OK)
[ 7.140] drmOpenByBusid: drmOpenMinor returns 9
[ 7.140] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 7.140] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.140] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7.140] (==) intel(0): RGB weight 888
[ 7.140] (==) intel(0): Default visual is TrueColor
[ 7.140] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT2)
[ 7.140] (**) intel(0): Relaxed fencing enabled
[ 7.140] (**) intel(0): Wait on SwapBuffers? enabled
[ 7.140] (**) intel(0): Triple buffering? enabled
[ 7.140] (**) intel(0): Framebuffer tiled
[ 7.140] (**) intel(0): Pixmaps tiled
[ 7.140] (**) intel(0): 3D buffers tiled
[ 7.141] (**) intel(0): SwapBuffers wait enabled
[ 7.141] (==) intel(0): video overlay key set to 0x101fe
[ 7.141] (II) intel(0): Output VGA1 has no monitor section
[ 7.259] (II) intel(0): Output HDMI1 has no monitor section
[ 7.281] (II) intel(0): Output HDMI2 has no monitor section
[ 7.328] (II) intel(0): Output DP1 has no monitor section
[ 7.376] (II) intel(0): Output DP2 has no monitor section
[ 7.376] (II) intel(0): EDID for output VGA1
[ 7.495] (II) intel(0): EDID for output HDMI1
[ 7.495] (II) intel(0): Manufacturer: GSM Model: 56f7 Serial#: 410217
[ 7.495] (II) intel(0): Year: 2009 Week: 11
[ 7.495] (II) intel(0): EDID Version: 1.3
[ 7.495] (II) intel(0): Digital Display Input
[ 7.495] (II) intel(0): Max Image Size [cm]: horiz.: 60 vert.: 34
[ 7.495] (II) intel(0): Gamma: 2.20
[ 7.495] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 7.495] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.495] (II) intel(0): First detailed timing is preferred mode
[ 7.495] (II) intel(0): redX: 0.661 redY: 0.318 greenX: 0.207 greenY: 0.668
[ 7.495] (II) intel(0): blueX: 0.144 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 7.495] (II) intel(0): Supported established timings:
[ 7.495] (II) intel(0): 720x400@70Hz
[ 7.495] (II) intel(0): 640x480@60Hz
[ 7.495] (II) intel(0): 640x480@75Hz
[ 7.495] (II) intel(0): 800x600@56Hz
[ 7.495] (II) intel(0): 800x600@60Hz
[ 7.495] (II) intel(0): 800x600@75Hz
[ 7.495] (II) intel(0): 832x624@75Hz
[ 7.495] (II) intel(0): 1024x768@60Hz
[ 7.495] (II) intel(0): 1024x768@75Hz
[ 7.495] (II) intel(0): 1280x1024@75Hz
[ 7.495] (II) intel(0): 1152x864@75Hz
[ 7.495] (II) intel(0): Manufacturer's mask: 0
[ 7.495] (II) intel(0): Supported standard timings:
[ 7.495] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 7.495] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[ 7.495] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 7.495] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 7.495] (II) intel(0): Supported detailed timing:
[ 7.495] (II) intel(0): clock: 138.5 MHz Image Size: 598 x 336 mm
[ 7.495] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 7.495] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 7.495] (II) intel(0): Supported detailed timing:
[ 7.495] (II) intel(0): clock: 148.5 MHz Image Size: 598 x 336 mm
[ 7.495] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 7.495] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 7.495] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[ 7.495] (II) intel(0): Monitor name: W2753
[ 7.495] (II) intel(0): EDID (in hex):
[ 7.495] (II) intel(0): 00ffffffffffff001e6df75669420600
[ 7.495] (II) intel(0): 0b130103803c2278ea60e5a95135ab24
[ 7.495] (II) intel(0): 115054a76b80b300818f8180714f0101
[ 7.495] (II) intel(0): 0101010101011a3680a070381f403020
[ 7.495] (II) intel(0): 350056502100001a023a801871382d40
[ 7.495] (II) intel(0): 582c450056502100001e000000fd0038
[ 7.495] (II) intel(0): 4b1e530f000a202020202020000000fc
[ 7.495] (II) intel(0): 0057323735330a2020202020202000b8
[ 7.495] (II) intel(0): Printing probed modes for output HDMI1
[ 7.495] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 7.495] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 7.495] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 7.495] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 7.495] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.495] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 7.495] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 7.495] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.495] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 7.495] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 7.495] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.495] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.495] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 7.495] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.495] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 7.518] (II) intel(0): EDID for output HDMI2
[ 7.564] (II) intel(0): EDID for output DP1
[ 7.612] (II) intel(0): EDID for output DP2
[ 7.612] (II) intel(0): Output VGA1 disconnected
[ 7.612] (II) intel(0): Output HDMI1 connected
[ 7.612] (II) intel(0): Output HDMI2 disconnected
[ 7.612] (II) intel(0): Output DP1 disconnected
[ 7.612] (II) intel(0): Output DP2 disconnected
[ 7.612] (II) intel(0): Using exact sizes for initial modes
[ 7.612] (II) intel(0): Output HDMI1 using initial mode 1920x1080
[ 7.612] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.612] (II) intel(0): Kernel page flipping support detected, enabling
[ 7.612] (==) intel(0): DPI set to (96, 96)
[ 7.612] (II) Loading sub module "fb"
[ 7.612] (II) LoadModule: "fb"
[ 7.612] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.686] (II) Module fb: vendor="X.Org Foundation"
[ 7.686] compiled for 1.12.3.902, module version = 1.0.0
[ 7.686] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.686] (II) Loading sub module "dri2"
[ 7.686] (II) LoadModule: "dri2"
[ 7.686] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 7.686] (II) Module dri2: vendor="X.Org Foundation"
[ 7.686] compiled for 1.12.3.902, module version = 1.2.0
[ 7.686] ABI class: X.Org Server Extension, version 6.0
[ 7.686] (II) UnloadModule: "vesa"
[ 7.686] (II) Unloading vesa
[ 7.687] (II) UnloadModule: "fbdev"
[ 7.687] (II) Unloading fbdev
[ 7.687] (II) UnloadSubModule: "fbdevhw"
[ 7.687] (II) Unloading fbdevhw
[ 7.687] (==) Depth 24 pixmap format is 32 bpp
[ 7.687] (II) intel(0): [DRI2] Setup complete
[ 7.687] (II) intel(0): [DRI2] DRI driver: i965
[ 7.687] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 8.082] (II) UXA(0): Driver registered support for the following operations:
[ 8.082] (II) solid
[ 8.082] (II) copy
[ 8.082] (II) composite (RENDER acceleration)
[ 8.082] (II) put_image
[ 8.082] (II) get_image
[ 8.082] (==) intel(0): Backing store disabled
[ 8.082] (==) intel(0): Silken mouse enabled
[ 8.082] (II) intel(0): Initializing HW Cursor
[ 8.082] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 8.082] (==) intel(0): DPMS enabled
[ 8.082] (==) intel(0): Intel XvMC decoder enabled
[ 8.082] (II) intel(0): Set up textured video
[ 8.082] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 8.082] (II) intel(0): direct rendering: DRI2 Enabled
[ 8.082] (==) intel(0): hotplug detection: "enabled"
[ 8.144] (--) RandR disabled
[ 8.144] (II) Initializing built-in extension Generic Event Extension
[ 8.144] (II) Initializing built-in extension SHAPE
[ 8.144] (II) Initializing built-in extension MIT-SHM
[ 8.144] (II) Initializing built-in extension XInputExtension
[ 8.144] (II) Initializing built-in extension XTEST
[ 8.144] (II) Initializing built-in extension BIG-REQUESTS
[ 8.144] (II) Initializing built-in extension SYNC
[ 8.144] (II) Initializing built-in extension XKEYBOARD
[ 8.144] (II) Initializing built-in extension XC-MISC
[ 8.144] (II) Initializing built-in extension SECURITY
[ 8.144] (II) Initializing built-in extension XINERAMA
[ 8.144] (II) Initializing built-in extension XFIXES
[ 8.144] (II) Initializing built-in extension RENDER
[ 8.144] (II) Initializing built-in extension RANDR
[ 8.144] (II) Initializing built-in extension COMPOSITE
[ 8.144] (II) Initializing built-in extension DAMAGE
[ 8.144] (II) SELinux: Disabled on system
[ 8.274] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 8.274] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 8.274] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 8.274] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 8.275] (II) AIGLX: Loaded and initialized i965
[ 8.275] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 8.275] (II) intel(0): Setting screen physical size to 508 x 285
[ 8.502] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 8.502] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 8.502] (II) LoadModule: "evdev"
[ 8.502] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 8.503] (II) Module evdev: vendor="X.Org Foundation"
[ 8.503] compiled for 1.12.1, module version = 2.7.0
[ 8.503] Module class: X.Org XInput Driver
[ 8.503] ABI class: X.Org XInput driver, version 16.0
[ 8.503] (II) Using input driver 'evdev' for 'Power Button'
[ 8.503] (**) Power Button: always reports core events
[ 8.503] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 8.503] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 8.503] (--) evdev: Power Button: Found keys
[ 8.503] (II) evdev: Power Button: Configuring as keyboard
[ 8.503] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 8.503] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 8.503] (**) Option "xkb_rules" "evdev"
[ 8.503] (**) Option "xkb_model" "pc105"
[ 8.503] (**) Option "xkb_layout" "us"
[ 8.503] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 8.503] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 8.503] (II) Using input driver 'evdev' for 'Video Bus'
[ 8.503] (**) Video Bus: always reports core events
[ 8.503] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 8.503] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 8.503] (--) evdev: Video Bus: Found keys
[ 8.503] (II) evdev: Video Bus: Configuring as keyboard
[ 8.503] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 8.503] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 8.503] (**) Option "xkb_rules" "evdev"
[ 8.503] (**) Option "xkb_model" "pc105"
[ 8.503] (**) Option "xkb_layout" "us"
[ 8.503] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 8.503] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 8.503] (II) Using input driver 'evdev' for 'Power Button'
[ 8.503] (**) Power Button: always reports core events
[ 8.503] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 8.503] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 8.503] (--) evdev: Power Button: Found keys
[ 8.503] (II) evdev: Power Button: Configuring as keyboard
[ 8.503] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 8.504] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 8.504] (**) Option "xkb_rules" "evdev"
[ 8.504] (**) Option "xkb_model" "pc105"
[ 8.504] (**) Option "xkb_layout" "us"
[ 8.504] (II) config/udev: Adding input device Western Digital My Book (/dev/input/event7)
[ 8.504] (II) No input driver specified, ignoring this device.
[ 8.504] (II) This device may have been added with another device file.
[ 8.504] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4002 (/dev/input/event5)
[ 8.504] (**) Logitech Unifying Device. Wireless PID:4002: Applying InputClass "evdev keyboard catchall"
[ 8.504] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4002'
[ 8.504] (**) Logitech Unifying Device. Wireless PID:4002: always reports core events
[ 8.504] (**) evdev: Logitech Unifying Device. Wireless PID:4002: Device: "/dev/input/event5"
[ 8.504] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Vendor 0x46d Product 0xc52b
[ 8.504] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found 1 mouse buttons
[ 8.504] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found scroll wheel(s)
[ 8.504] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found relative axes
[ 8.504] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing relative x/y axes to exist.
[ 8.504] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found absolute axes
[ 8.504] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Forcing absolute x/y axes to exist.
[ 8.504] (--) evdev: Logitech Unifying Device. Wireless PID:4002: Found keys
[ 8.504] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as mouse
[ 8.504] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Configuring as keyboard
[ 8.504] (II) evdev: Logitech Unifying Device. Wireless PID:4002: Adding scrollwheel support
[ 8.504] (**) evdev: Logitech Unifying Device. Wireless PID:4002: YAxisMapping: buttons 4 and 5
[ 8.504] (**) evdev: Logitech Unifying Device. Wireless PID:4002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 8.504] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/input/input5/event5"
[ 8.504] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4002" (type: KEYBOARD, id 9)
[ 8.504] (**) Option "xkb_rules" "evdev"
[ 8.504] (**) Option "xkb_model" "pc105"
[ 8.504] (**) Option "xkb_layout" "us"
[ 8.504] (II) evdev: Logitech Unifying Device. Wireless PID:4002: initialized for relative axes.
[ 8.504] (WW) evdev: Logitech Unifying Device. Wireless PID:4002: ignoring absolute axes.
[ 8.505] (**) Logitech Unifying Device. Wireless PID:4002: (accel) keeping acceleration scheme 1
[ 8.505] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration profile 0
[ 8.505] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration factor: 2.000
[ 8.505] (**) Logitech Unifying Device. Wireless PID:4002: (accel) acceleration threshold: 4
[ 8.505] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event6)
[ 8.505] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[ 8.505] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[ 8.505] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[ 8.505] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event6"
[ 8.505] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[ 8.505] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[ 8.505] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[ 8.505] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[ 8.505] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[ 8.505] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[ 8.505] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[ 8.505] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[ 8.505] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 8.505] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0007/input/input6/event6"
[ 8.505] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 10)
[ 8.505] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[ 8.505] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[ 8.505] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[ 8.505] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[ 8.505] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[ 8.505] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
[ 8.505] (II) No input driver specified, ignoring this device.
[ 8.505] (II) This device may have been added with another device file.
[ 8.505] (II) config/udev: Adding input device zc3xx (/dev/input/event8)
[ 8.505] (**) zc3xx: Applying InputClass "evdev keyboard catchall"
[ 8.505] (II) Using input driver 'evdev' for 'zc3xx'
[ 8.505] (**) zc3xx: always reports core events
[ 8.505] (**) evdev: zc3xx: Device: "/dev/input/event8"
[ 8.505] (--) evdev: zc3xx: Vendor 0x46d Product 0x8d7
[ 8.505] (--) evdev: zc3xx: Found keys
[ 8.505] (II) evdev: zc3xx: Configuring as keyboard
[ 8.505] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/input/input8/event8"
[ 8.506] (II) XINPUT: Adding extended input device "zc3xx" (type: KEYBOARD, id 11)
[ 8.506] (**) Option "xkb_rules" "evdev"
[ 8.506] (**) Option "xkb_model" "pc105"
[ 8.506] (**) Option "xkb_layout" "us"
[ 8.506] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event3)
[ 8.506] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 8.506] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 8.506] (**) Eee PC WMI hotkeys: always reports core events
[ 8.506] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event3"
[ 8.506] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 8.506] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 8.506] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 8.506] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input3/event3"
[ 8.506] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[ 8.506] (**) Option "xkb_rules" "evdev"
[ 8.506] (**) Option "xkb_model" "pc105"
[ 8.506] (**) Option "xkb_layout" "us"
[ 8.506] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 8.506] (II) No input driver specified, ignoring this device.
[ 8.506] (II) This device may have been added with another device file.
[ 8.629] (II) intel(0): EDID vendor "GSM", prod id 22263
[ 8.629] (II) intel(0): Using EDID range info for horizontal sync
[ 8.629] (II) intel(0): Using EDID range info for vertical refresh
[ 8.629] (II) intel(0): Printing DDC gathered Modelines:
[ 8.629] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 8.629] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 8.629] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8.629] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8.629] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8.629] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8.629] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 8.629] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 8.629] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 8.629] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8.629] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 8.629] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8.629] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8.629] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 8.629] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 9.664] (II) intel(0): EDID vendor "GSM", prod id 22263
[ 9.664] (II) intel(0): Using hsync ranges from config file
[ 9.664] (II) intel(0): Using vrefresh ranges from config file
[ 9.665] (II) intel(0): Printing DDC gathered Modelines:
[ 9.665] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 9.665] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 9.665] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.665] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 9.665] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.665] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.665] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.665] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.665] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 9.665] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.665] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 9.665] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.665] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.665] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 9.665] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 25.723] (II) intel(0): EDID vendor "GSM", prod id 22263
[ 25.723] (II) intel(0): Using hsync ranges from config file
[ 25.723] (II) intel(0): Using vrefresh ranges from config file
[ 25.723] (II) intel(0): Printing DDC gathered Modelines:
[ 25.723] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 25.723] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 25.723] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 25.723] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 25.723] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 25.723] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 25.723] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 25.723] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 25.723] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 25.723] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 25.723] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 25.723] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 25.723] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 25.723] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 25.723] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 26.496] (II) intel(0): EDID vendor "GSM", prod id 22263
[ 26.496] (II) intel(0): Using hsync ranges from config file
[ 26.496] (II) intel(0): Using vrefresh ranges from config file
[ 26.496] (II) intel(0): Printing DDC gathered Modelines:
[ 26.496] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 26.496] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 26.496] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 26.496] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 26.496] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 26.496] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 26.496] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 26.496] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 26.496] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 26.496] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 26.496] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 26.496] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 26.496] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 26.496] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 26.496] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 26.841] (II) intel(0): EDID vendor "GSM", prod id 22263
[ 26.841] (II) intel(0): Using hsync ranges from config file
[ 26.841] (II) intel(0): Using vrefresh ranges from config file
[ 26.842] (II) intel(0): Printing DDC gathered Modelines:
[ 26.842] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 26.842] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 26.842] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 26.842] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 26.842] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 26.842] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 26.842] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 26.842] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 26.842] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 26.842] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 26.842] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 26.842] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 26.842] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 26.842] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 26.842] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3197484
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1
N: input/event1
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1
E: DMI_VENDOR=System manufacturer
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3228666
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: KEY=3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: PRODUCT=19/0/6/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3969478
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4
N: input/event4
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event4
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4
E: DMI_VENDOR=System manufacturer
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3972203
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: KEY=10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: NAME="Power Button"
E: PHYS="PNP0C0C/button/input0"
E: PRODUCT=19/0/1/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3197299
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0
N: input/event0
E: BACKSPACE=guess
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0
E: DMI_VENDOR=System manufacturer
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0C:00
E: ID_PATH_TAG=acpi-PNP0C0C_00
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3208554
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/input/input7
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/input/input7
E: EV=20013
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_MODEL=My_Book
E: ID_MODEL_ENC=My\x20Book
E: ID_MODEL_ID=1102
E: ID_PATH=pci-0000:00:14.0-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_1_1
E: ID_REVISION=1028
E: ID_SERIAL=Western_Digital_My_Book_57442D574341563530313730393534
E: ID_SERIAL_SHORT=57442D574341563530313730393534
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:080650:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Western_Digital
E: ID_VENDOR_ENC=Western\x20Digital
E: ID_VENDOR_ID=1058
E: KEY=ff 0 0 0 0
E: LED=ff00
E: MODALIAS=input:b0003v1058p1102e0111-e0,1,4,11,k100,101,102,103,104,105,106,107,ram4,l8,9,A,B,C,D,E,sfw
E: MSC=10
E: NAME="Western Digital My Book"
E: PHYS="usb-0000:00:14.0-1/input1"
E: PRODUCT=3/1058/1102/111
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: UNIQ="57442D574341563530313730393534"
E: USEC_INITIALIZED=4842533
P: /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/input/input7/event7
N: input/event7
S: input/by-id/usb-Western_Digital_My_Book_57442D574341563530313730393534-event-if01
S: input/by-path/pci-0000:00:14.0-usb-0:1:1.1-event
E: DEVLINKS=/dev/input/by-id/usb-Western_Digital_My_Book_57442D574341563530313730393534-event-if01 /dev/input/by-path/pci-0000:00:14.0-usb-0:1:1.1-event
E: DEVNAME=/dev/input/event7
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/input/input7/event7
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_MODEL=My_Book
E: ID_MODEL_ENC=My\x20Book
E: ID_MODEL_ID=1102
E: ID_PATH=pci-0000:00:14.0-usb-0:1:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_1_1_1
E: ID_REVISION=1028
E: ID_SERIAL=Western_Digital_My_Book_57442D574341563530313730393534
E: ID_SERIAL_SHORT=57442D574341563530313730393534
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:080650:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_VENDOR=Western_Digital
E: ID_VENDOR_ENC=Western\x20Digital
E: ID_VENDOR_ID=1058
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=4845157
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/input/input5
E: ABS=100000000
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/input/input5
E: EV=12001f
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.3:1.2
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_3_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=4837fff072ff32d bf54444600000000 1 30f908b17c007 ffff7bfad941dfff febeffdfffefffff fffffffffffffffe
E: LED=1f
E: MODALIAS=input:b0003v046DpC52Be0111-e0,1,2,3,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8E,8F,90,96,98,9B,9C,9E,9F,A1,A3,A4,A5,A6,A7,A8,A9,AB,AC,AD,AE,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,CE,CF,D0,D1,D2,D4,D8,D9,DB,DF,E4,E7,E8,E9,EA,EB,F0,F1,100,161,162,166,16A,16E,172,174,176,178,179,17A,17B,17C,17D,17F,180,182,183,185,188,189,18C,18D,18E,18F,190,191,192,193,195,198,199,19A,1A0,1A1,1A2,1A3,1A4,1A5,1A6,1A7,1A8,1A9,1AA,1AB,1AC,1AD,1AE,1B0,1B1,1B7,1BA,r6,a20,m4,l0,1,2,3,4,sfw
E: MSC=10
E: NAME="Logitech Unifying Device. Wireless PID:4002"
E: PHYS="usb-0000:00:1a.0-1.3:1"
E: PRODUCT=3/46d/c52b/111
E: PROP=0
E: REL=40
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: UNIQ=""
E: USEC_INITIALIZED=4135524
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/input/input5/event5
N: input/event5
S: input/by-id/usb-Logitech_USB_Receiver-event-kbd
S: input/by-id/usb-Logitech_USB_Receiver-if02-event-kbd
S: input/by-path/pci-0000:00:1a.0-usb-0:1.3:1.2-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-kbd /dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-kbd /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.3:1.2-event-kbd
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/input/input5/event5
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.3:1.2
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_3_1_2
E: ID_REVISION=1201
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=4138848
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0007/input/input6
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0007/input/input6
E: EV=17
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.4:1.2
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_4_1_2
E: ID_REVISION=2400
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: KEY=ffff0000 0 0 0 0
E: MODALIAS=input:b0003v046DpC52Be0111-e0,1,2,4,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,lsfw
E: MSC=10
E: NAME="Logitech Unifying Device. Wireless PID:101b"
E: PHYS="usb-0000:00:1a.0-1.4:1"
E: PRODUCT=3/46d/c52b/111
E: PROP=0
E: REL=143
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: UNIQ=""
E: USEC_INITIALIZED=4259854
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0007/input/input6/event6
N: input/event6
S: input/by-id/usb-Logitech_USB_Receiver-event-mouse
S: input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse
S: input/by-path/pci-0000:00:1a.0-usb-0:1.4:1.2-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse /dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.4:1.2-event-mouse
E: DEVNAME=/dev/input/event6
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0007/input/input6/event6
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.4:1.2
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_4_1_2
E: ID_REVISION=2400
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=4262766
P: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0007/input/input6/mouse0
N: input/mouse0
S: input/by-id/usb-Logitech_USB_Receiver-if02-mouse
S: input/by-id/usb-Logitech_USB_Receiver-mouse
S: input/by-path/pci-0000:00:1a.0-usb-0:1.4:1.2-mouse
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_Receiver-if02-mouse /dev/input/by-id/usb-Logitech_USB_Receiver-mouse /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.4:1.2-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0007/input/input6/mouse0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c52b
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.4:1.2
E: ID_PATH_TAG=pci-0000_00_1a_0-usb-0_1_4_1_2
E: ID_REVISION=2400
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=4262676
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/input/input8
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/input/input8
E: EV=3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.6
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_6
E: KEY=100000 0 0 0
E: MODALIAS=input:b0003v046Dp08D7e0100-e0,1,kD4,ramlsfw
E: NAME="zc3xx"
E: PHYS="usb-0000:00:1d.0-1.6/input0"
E: PRODUCT=3/46d/8d7/100
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=5385557
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/input/input8/event8
N: input/event8
S: input/by-path/pci-0000:00:1d.0-usb-0:1.6-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.0-usb-0:1.6-event
E: DEVNAME=/dev/input/event8
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/input/input8/event8
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.6
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_6
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=5388022
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/eeepc-wmi/input/input3
E: DEVPATH=/devices/platform/eeepc-wmi/input/input3
E: EV=100013
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-eeepc-wmi
E: ID_PATH_TAG=platform-eeepc-wmi
E: KEY=7e40000 0 0 0 0 11400800100000 300080001100000 e000000000000 0
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,4,14,k71,72,73,94,98,AB,B8,B9,D4,E3,EE,F0,F4,212,215,216,217,218,219,21A,ram4,lsfw
E: MSC=10
E: NAME="Eee PC WMI hotkeys"
E: PHYS="eeepc-wmi/input0"
E: PRODUCT=19/0/0/0
E: PROP=0
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3212092
P: /devices/platform/eeepc-wmi/input/input3/event3
N: input/event3
S: input/by-path/platform-eeepc-wmi-event
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-eeepc-wmi-event
E: DEVNAME=/dev/input/event3
E: DEVPATH=/devices/platform/eeepc-wmi/input/input3/event3
E: DMI_VENDOR=System manufacturer
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-eeepc-wmi
E: ID_PATH_TAG=platform-eeepc-wmi
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3213653
E: XKBLAYOUT=us
E: XKBMODEL=pc105
P: /devices/platform/pcspkr/input/input2
E: DEVPATH=/devices/platform/pcspkr/input/input2
E: EV=40001
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3199251
P: /devices/platform/pcspkr/input/input2/event2
N: input/event2
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/platform/pcspkr/input/input2/event2
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: UDEV_LOG=3
E: USEC_INITIALIZED=3232435
DRM Information from dmesg:
---------------------------
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 1.338652] Linux agpgart interface v0.103
[ 1.338701] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 1.338774] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.340045] agpgart-intel 0000:00:00.0: detected 262144K stolen memory
[ 1.340144] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 3.405590] [drm] Initialized drm 1.1.0 20060810
[ 3.473934] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.474137] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.474139] [drm] Driver supports precise vblank timestamp query.
[ 3.474183] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 3.903478] fbcon: inteldrmfb (fb0) is primary device
[ 4.096439] fb0: inteldrmfb frame buffer device
[ 4.096441] drm: registered panic notifier
[ 4.180633] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-nouveau depends on:
ii libc6 2.13-35
ii libdrm2 2.4.33-3
ii libudev0 175-7
ii xserver-xorg-core [xorg-video-abi-12] 2:1.12.3.902-1
Versions of packages xserver-xorg-video-nouveau recommends:
ii libgl1-mesa-dri 8.0.4-2
xserver-xorg-video-nouveau suggests no packages.
-- no debconf information
Reply to: