Bug#681254: xserver-xorg-video-radeon: HD 6450 video card not properly recognized / supported
On 12/07/12 11:41 AM, Michel Dänzer wrote:
On Don, 2012-07-12 at 10:58 -0400, Gary Dale wrote:
On 12/07/12 04:01 AM, Michel Dänzer wrote:
On Mit, 2012-07-11 at 13:59 -0400, Gary Dale wrote:
DRM Information from dmesg:
---------------------------
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 2.160898] PCI-DMA: Disabling AGP.
[ 2.160985] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 2.456450] Linux agpgart interface v0.103
Looks like something is preventing the radeon kernel driver from
loading / initializing. Make sure the radeon kernel module isn't
blacklisted, e.g.
The X radeon driver can't work without the corresponding kernel driver
on your card, which probably also explains the resolution problem.
The radeon module can't be blacklisted. The onboard video (HD 3300) I
have reverted to also uses it.
re. Kernel driver: Thanks. I didn't realize that it needed a kernel
driver. I've followed instructions at
http://www.x.org/wiki/radeonBuildHowTo#Kernel-based_ModeSetting and will
give it another try.
-------------------
Further to above - still no joy in Mudville. If I
modprobe -v radeon modeset=1
from a "rescue" console login, the screen changes into a higher text
resolution but startx gives me a graphics screen with an error message
about something having gone wrong.
Attached is the latest log which should contain the last couple attempts
to startx.
[...]
[ 14.763] (II) [KMS] drm report modesetting isn't supported.
[ 14.763] (II) GPU only supported with KMS, using vesa instead.
Still doesn't look like the kernel driver is active. Please provide the
corresponding dmesg output.
Interesting. This time after running modprobe... then startx and getting
the error message, I exited from the rescue mode and let the startup
continue. X came up normally. I've attached /var/log/dmesg you requested.
So it appears that startx isn't working for some reason. However, once
the radeon driver is loaded, I seem to be able to get a working X session.
Thanks!
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.21-3) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 09:07:26 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=95fe03ab-42b8-412a-9bb3-2ae7a1e829bc ro single
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff98000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff98000 - 00000000cffc0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M5A88-V EVO, BIOS 0903 11/18/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000022f000000 aka 8944M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff80000 page 4k
[ 0.000000] kernel direct mapping tables up to cff80000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000022f000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 022f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 22f000000 @ cff7e000-cff80000
[ 0.000000] RAMDISK: 3696a000 - 374ad000
[ 0.000000] ACPI: RSDP 00000000000fbc30 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff80100 00054 (v01 111811 XSDT1005 20111118 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 111811 FACP1005 20111118 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff80460 0F160 (v01 A1867 A1867001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff98000 00040
[ 0.000000] ACPI: APIC 00000000cff80390 0008C (v01 111811 APIC1005 20111118 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80420 0003C (v01 111811 OEMMCFG 20111118 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff98040 00072 (v01 111811 OEMB1005 20111118 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff8f8b0 00038 (v01 111811 OEMHPET 20111118 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff8f8f0 01158 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000022f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000022f000000
[ 0.000000] NODE_DATA [000000022effb000 - 000000022effffff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880226600000-ffff88022d7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0022f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000cff80
[ 0.000000] 0: 0x00100000 -> 0x0022f000
[ 0.000000] On node 0 totalpages: 2092810
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3917 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833464 pages, LIFO batch:31
[ 0.000000] Normal zone: 16968 pages used for memmap
[ 0.000000] Normal zone: 1224120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x16] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 22, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff98000
[ 0.000000] PM: Registered nosave memory: 00000000cff98000 - 00000000cffc0000
[ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2fa00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022ec00000 s82816 r8192 d23680 u262144
[ 0.000000] pcpu-alloc: s82816 r8192 d23680 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061501
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=95fe03ab-42b8-412a-9bb3-2ae7a1e829bc ro single
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 8101968k/9158656k available (3409k kernel code, 787416k absent, 269272k reserved, 3324k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3314.149 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6628.29 BogoMIPS (lpj=13256596)
[ 0.004101] pid_max: default: 32768 minimum: 301
[ 0.004184] Security Framework initialized
[ 0.004233] AppArmor: AppArmor disabled by boot time parameter
[ 0.005043] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009301] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010245] Mount-cache hash table entries: 256
[ 0.010393] Initializing cgroup subsys cpuacct
[ 0.010442] Initializing cgroup subsys memory
[ 0.010500] Initializing cgroup subsys devices
[ 0.010548] Initializing cgroup subsys freezer
[ 0.010595] Initializing cgroup subsys net_cls
[ 0.010643] Initializing cgroup subsys blkio
[ 0.010697] Initializing cgroup subsys perf_event
[ 0.010767] tseg: 0000000000
[ 0.010777] CPU: Physical Processor ID: 0
[ 0.010824] CPU: Processor Core ID: 0
[ 0.010871] mce: CPU supports 7 MCE banks
[ 0.011216] ACPI: Core revision 20110623
[ 0.020376] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060665] CPU0: AMD FX(tm)-6100 Six-Core Processor stepping 02
[ 0.064003] Performance Events: AMD Family 15h PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 6
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000003f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 95000
[ 0.156034] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156197] #2
[ 0.156241] smpboot cpu 2: start_ip = 95000
[ 0.248027] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.248154] #3
[ 0.248197] smpboot cpu 3: start_ip = 95000
[ 0.340033] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.340156] #4
[ 0.340199] smpboot cpu 4: start_ip = 95000
[ 0.432042] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.432169] #5
[ 0.432212] smpboot cpu 5: start_ip = 95000
[ 0.524044] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.524106] Brought up 6 CPUs
[ 0.524154] Total of 6 processors activated (39776.04 BogoMIPS).
[ 0.528188] devtmpfs: initialized
[ 0.533491] PM: Registering ACPI NVS region at cff98000 (163840 bytes)
[ 0.533491] print_constraints: dummy:
[ 0.533491] NET: Registered protocol family 16
[ 0.533491] Extended Config Space enabled on 1 nodes
[ 0.533491] ACPI: bus type pci registered
[ 0.533491] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.533491] PCI: not using MMCONFIG
[ 0.533491] PCI: Using configuration type 1 for base access
[ 0.533491] PCI: Using configuration type 1 for extended access
[ 0.533691] bio: create slab <bio-0> at 0
[ 0.533691] ACPI: Added _OSI(Module Device)
[ 0.533691] ACPI: Added _OSI(Processor Device)
[ 0.533691] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.533691] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.536928] ACPI: EC: Look up EC in DSDT
[ 0.538272] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.701438] ACPI: Interpreter enabled
[ 0.701499] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.701839] ACPI: Using IOAPIC for interrupt routing
[ 0.701937] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.705881] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.734209] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.734370] ACPI: No dock devices found.
[ 0.734418] HEST: Table not found.
[ 0.734466] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.734722] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.734977] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.735025] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.735074] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.735128] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.735182] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.735236] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.735301] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.735353] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 0.735388] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.735391] pci 0000:00:02.0: PME# disabled
[ 0.735412] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
[ 0.735445] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.735448] pci 0000:00:09.0: PME# disabled
[ 0.735461] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.735494] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.735496] pci 0000:00:0a.0: PME# disabled
[ 0.735521] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.735539] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
[ 0.735548] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
[ 0.735556] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
[ 0.735565] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
[ 0.735574] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
[ 0.735582] pci 0000:00:11.0: reg 24: [mem 0xfe4ffc00-0xfe4fffff]
[ 0.735638] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.735650] pci 0000:00:12.0: reg 10: [mem 0xfe4fe000-0xfe4fefff]
[ 0.735717] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.735734] pci 0000:00:12.2: reg 10: [mem 0xfe4ff800-0xfe4ff8ff]
[ 0.735810] pci 0000:00:12.2: supports D1 D2
[ 0.735812] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.735815] pci 0000:00:12.2: PME# disabled
[ 0.735835] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.735847] pci 0000:00:13.0: reg 10: [mem 0xfe4fd000-0xfe4fdfff]
[ 0.735915] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.735932] pci 0000:00:13.2: reg 10: [mem 0xfe4ff400-0xfe4ff4ff]
[ 0.736008] pci 0000:00:13.2: supports D1 D2
[ 0.736010] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.736013] pci 0000:00:13.2: PME# disabled
[ 0.736050] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.736125] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.736145] pci 0000:00:14.2: reg 10: [mem 0xfe4f4000-0xfe4f7fff 64bit]
[ 0.736208] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.736212] pci 0000:00:14.2: PME# disabled
[ 0.736225] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.736296] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.736336] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.736348] pci 0000:00:14.5: reg 10: [mem 0xfe4fc000-0xfe4fcfff]
[ 0.736416] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.736487] pci 0000:00:15.0: supports D1 D2
[ 0.736511] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[ 0.736584] pci 0000:00:15.1: supports D1 D2
[ 0.736611] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.736623] pci 0000:00:16.0: reg 10: [mem 0xfe4f3000-0xfe4f3fff]
[ 0.736690] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.736708] pci 0000:00:16.2: reg 10: [mem 0xfe4ff000-0xfe4ff0ff]
[ 0.736783] pci 0000:00:16.2: supports D1 D2
[ 0.736785] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.736789] pci 0000:00:16.2: PME# disabled
[ 0.736808] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
[ 0.736827] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
[ 0.736842] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
[ 0.736858] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
[ 0.736877] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
[ 0.736892] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
[ 0.736945] pci 0000:01:00.0: [1002:6779] type 0 class 0x000300
[ 0.736959] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.736970] pci 0000:01:00.0: reg 18: [mem 0xfe5e0000-0xfe5fffff 64bit]
[ 0.736977] pci 0000:01:00.0: reg 20: [io 0xc000-0xc0ff]
[ 0.736991] pci 0000:01:00.0: reg 30: [mem 0xfe5c0000-0xfe5dffff pref]
[ 0.737025] pci 0000:01:00.0: supports D1 D2
[ 0.737048] pci 0000:01:00.1: [1002:aa98] type 0 class 0x000403
[ 0.737062] pci 0000:01:00.1: reg 10: [mem 0xfe5bc000-0xfe5bffff 64bit]
[ 0.737125] pci 0000:01:00.1: supports D1 D2
[ 0.744068] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.744127] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.744132] pci 0000:00:02.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.744140] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.744219] pci 0000:02:00.0: [1106:3403] type 0 class 0x000c00
[ 0.744254] pci 0000:02:00.0: reg 10: [mem 0xfe6ff800-0xfe6fffff 64bit]
[ 0.744274] pci 0000:02:00.0: reg 18: [io 0xd800-0xd8ff]
[ 0.744419] pci 0000:02:00.0: supports D2
[ 0.744422] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[ 0.744430] pci 0000:02:00.0: PME# disabled
[ 0.744491] pci 0000:02:00.1: [1106:0415] type 0 class 0x000101
[ 0.744517] pci 0000:02:00.1: reg 10: [io 0xdc00-0xdc07]
[ 0.744536] pci 0000:02:00.1: reg 14: [io 0xd480-0xd483]
[ 0.744555] pci 0000:02:00.1: reg 18: [io 0xd400-0xd407]
[ 0.744574] pci 0000:02:00.1: reg 1c: [io 0xd080-0xd083]
[ 0.744592] pci 0000:02:00.1: reg 20: [io 0xd000-0xd00f]
[ 0.744627] pci 0000:02:00.1: reg 30: [mem 0xfe6e0000-0xfe6effff pref]
[ 0.744713] pci 0000:02:00.1: supports D2
[ 0.744716] pci 0000:02:00.1: PME# supported from D2 D3hot D3cold
[ 0.744724] pci 0000:02:00.1: PME# disabled
[ 0.752079] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.756053] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.756058] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.756116] pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03
[ 0.756138] pci 0000:03:00.0: reg 10: [mem 0xfe7f8000-0xfe7fffff 64bit]
[ 0.756240] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.756246] pci 0000:03:00.0: PME# disabled
[ 0.764074] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.764134] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.764216] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.764282] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.764287] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.764292] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.764297] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.764302] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.764307] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.764392] pci 0000:05:00.0: [14f1:8852] type 0 class 0x000400
[ 0.764427] pci 0000:05:00.0: reg 10: [mem 0xfe800000-0xfe9fffff 64bit]
[ 0.764603] pci 0000:05:00.0: supports D1 D2
[ 0.764607] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.764615] pci 0000:05:00.0: PME# disabled
[ 0.764644] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.764717] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.764778] pci 0000:00:15.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.764871] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
[ 0.764893] pci 0000:06:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.764929] pci 0000:06:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.764953] pci 0000:06:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.765047] pci 0000:06:00.0: supports D1 D2
[ 0.765051] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.765058] pci 0000:06:00.0: PME# disabled
[ 0.772073] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 0.772133] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.772145] pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.772183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.772627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.772723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.772818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.772914] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.773145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[ 0.773490] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.773953] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.782573] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 14 15)
[ 0.783013] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
[ 0.783457] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
[ 0.783898] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *10 11 14 15)
[ 0.784271] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.784732] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.785189] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.785649] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.786146] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.786146] vgaarb: loaded
[ 0.786146] vgaarb: bridge control possible 0000:01:00.0
[ 0.786146] PCI: Using ACPI for IRQ routing
[ 0.794269] PCI: pci_cache_line_size set to 64 bytes
[ 0.794364] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[ 0.794367] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff
[ 0.794369] reserve RAM buffer: 000000022f000000 - 000000022fffffff
[ 0.794460] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.794677] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.796090] Switching to clocksource hpet
[ 0.797874] pnp: PnP ACPI init
[ 0.797931] ACPI: bus type pnp registered
[ 0.798085] pnp 00:00: [bus 00-ff]
[ 0.798088] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.798090] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.798092] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.798094] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.798095] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.798097] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.798099] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.798134] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.798219] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.798221] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.798265] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.798355] pnp 00:02: [dma 4]
[ 0.798356] pnp 00:02: [io 0x0000-0x000f]
[ 0.798358] pnp 00:02: [io 0x0081-0x0083]
[ 0.798360] pnp 00:02: [io 0x0087]
[ 0.798361] pnp 00:02: [io 0x0089-0x008b]
[ 0.798363] pnp 00:02: [io 0x008f]
[ 0.798364] pnp 00:02: [io 0x00c0-0x00df]
[ 0.798392] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.798403] pnp 00:03: [io 0x0070-0x0071]
[ 0.798410] pnp 00:03: [irq 8]
[ 0.798438] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.798446] pnp 00:04: [io 0x0061]
[ 0.798475] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.798483] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.798487] pnp 00:05: [irq 13]
[ 0.798516] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.798559] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.798591] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.798637] pnp 00:07: [io 0x0060]
[ 0.798639] pnp 00:07: [io 0x0064]
[ 0.798643] pnp 00:07: [irq 1]
[ 0.798679] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.799314] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.799319] pnp 00:08: [irq 4]
[ 0.799320] pnp 00:08: [dma 0 disabled]
[ 0.799327] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.799425] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.799427] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.799479] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.799530] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.799579] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.799757] pnp 00:0a: [io 0x0010-0x001f]
[ 0.799758] pnp 00:0a: [io 0x0022-0x003f]
[ 0.799760] pnp 00:0a: [io 0x0062-0x0063]
[ 0.799762] pnp 00:0a: [io 0x0065-0x006f]
[ 0.799763] pnp 00:0a: [io 0x0072-0x007f]
[ 0.799765] pnp 00:0a: [io 0x0080]
[ 0.799766] pnp 00:0a: [io 0x0084-0x0086]
[ 0.799768] pnp 00:0a: [io 0x0088]
[ 0.799769] pnp 00:0a: [io 0x008c-0x008e]
[ 0.799771] pnp 00:0a: [io 0x0090-0x009f]
[ 0.799772] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.799774] pnp 00:0a: [io 0x00b1]
[ 0.799775] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.799777] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.799778] pnp 00:0a: [io 0x040b]
[ 0.799780] pnp 00:0a: [io 0x04d6]
[ 0.799781] pnp 00:0a: [io 0x0c00-0x0c01]
[ 0.799783] pnp 00:0a: [io 0x0c14]
[ 0.799784] pnp 00:0a: [io 0x0c50-0x0c51]
[ 0.799786] pnp 00:0a: [io 0x0c52]
[ 0.799787] pnp 00:0a: [io 0x0c6c]
[ 0.799789] pnp 00:0a: [io 0x0c6f]
[ 0.799790] pnp 00:0a: [io 0x0cd0-0x0cd1]
[ 0.799792] pnp 00:0a: [io 0x0cd2-0x0cd3]
[ 0.799793] pnp 00:0a: [io 0x0cd4-0x0cd5]
[ 0.799795] pnp 00:0a: [io 0x0cd6-0x0cd7]
[ 0.799796] pnp 00:0a: [io 0x0cd8-0x0cdf]
[ 0.799798] pnp 00:0a: [io 0x0b00-0x0b3f]
[ 0.799800] pnp 00:0a: [io 0x0800-0x089f]
[ 0.799802] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.799804] pnp 00:0a: [io 0x0b00-0x0b1f]
[ 0.799806] pnp 00:0a: [io 0x0b20-0x0b3f]
[ 0.799807] pnp 00:0a: [io 0x0900-0x090f]
[ 0.799809] pnp 00:0a: [io 0x0910-0x091f]
[ 0.799810] pnp 00:0a: [io 0xfe00-0xfefe]
[ 0.799812] pnp 00:0a: [io 0x0060-0x005f disabled]
[ 0.799814] pnp 00:0a: [io 0x0064-0x0063 disabled]
[ 0.799816] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.799817] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[ 0.799819] pnp 00:0a: [mem 0xfec10000-0xfec1001f]
[ 0.799821] pnp 00:0a: [mem 0xfed80000-0xfed80fff]
[ 0.799822] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.799920] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.799970] system 00:0a: [io 0x040b] has been reserved
[ 0.800029] system 00:0a: [io 0x04d6] has been reserved
[ 0.800078] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.800127] system 00:0a: [io 0x0c14] has been reserved
[ 0.800175] system 00:0a: [io 0x0c50-0x0c51] has been reserved
[ 0.800223] system 00:0a: [io 0x0c52] has been reserved
[ 0.800271] system 00:0a: [io 0x0c6c] has been reserved
[ 0.800320] system 00:0a: [io 0x0c6f] has been reserved
[ 0.800369] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
[ 0.800416] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
[ 0.800466] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
[ 0.800513] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
[ 0.800562] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
[ 0.800612] system 00:0a: [io 0x0b00-0x0b3f] has been reserved
[ 0.800661] system 00:0a: [io 0x0800-0x089f] has been reserved
[ 0.800711] system 00:0a: [io 0x0b00-0x0b1f] has been reserved
[ 0.800759] system 00:0a: [io 0x0b20-0x0b3f] has been reserved
[ 0.800807] system 00:0a: [io 0x0900-0x090f] has been reserved
[ 0.800855] system 00:0a: [io 0x0910-0x091f] has been reserved
[ 0.800903] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.800953] system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.801004] system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.801053] system 00:0a: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.801101] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.801307] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.801309] pnp 00:0b: [io 0x0230-0x023f]
[ 0.801311] pnp 00:0b: [io 0x0290-0x029f]
[ 0.801312] pnp 00:0b: [io 0x0300-0x030f]
[ 0.801313] pnp 00:0b: [io 0x0a30-0x0a3f]
[ 0.801366] system 00:0b: [io 0x0230-0x023f] has been reserved
[ 0.801415] system 00:0b: [io 0x0290-0x029f] has been reserved
[ 0.801463] system 00:0b: [io 0x0300-0x030f] has been reserved
[ 0.801512] system 00:0b: [io 0x0a30-0x0a3f] has been reserved
[ 0.801560] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.801596] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.801646] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.801695] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.801807] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.801809] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.801811] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.801812] pnp 00:0d: [mem 0x00100000-0xcfffffff]
[ 0.801814] pnp 00:0d: [mem 0xfec00000-0xffffffff]
[ 0.801869] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.801918] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.801967] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.802016] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.802065] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.802114] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.802210] pnp: PnP ACPI: found 14 devices
[ 0.802258] ACPI: ACPI bus type pnp unregistered
[ 0.809244] PCI: max bus depth: 1 pci_try_num: 2
[ 0.809271] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.809319] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.809368] pci 0000:00:02.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.809417] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.809472] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.809520] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.809568] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.809618] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.809666] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.809717] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.809774] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.809824] pci 0000:00:15.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.809878] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 0.809926] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.809983] pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.810048] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.810098] pci 0000:00:02.0: setting latency timer to 64
[ 0.810107] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.810156] pci 0000:00:09.0: setting latency timer to 64
[ 0.810159] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.810208] pci 0000:00:0a.0: setting latency timer to 64
[ 0.810219] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.810270] pci 0000:00:15.0: setting latency timer to 64
[ 0.810275] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.810326] pci 0000:00:15.1: setting latency timer to 64
[ 0.810329] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.810331] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.810332] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.810334] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.810336] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.810337] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.810339] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.810341] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.810343] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.810344] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.810346] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.810348] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.810350] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.810351] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.810353] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.810355] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.810356] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.810358] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.810360] pci_bus 0000:05: resource 1 [mem 0xfe800000-0xfe9fffff]
[ 0.810361] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.810363] pci_bus 0000:06: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.810486] NET: Registered protocol family 2
[ 0.810797] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.812154] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.813993] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.814250] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.814299] TCP reno registered
[ 0.814360] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.814452] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.814655] NET: Registered protocol family 1
[ 0.814727] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.656058] pci 0000:00:12.0: PCI INT A disabled
[ 1.656127] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.656233] pci 0000:00:12.2: PCI INT B disabled
[ 1.656296] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.736067] pci 0000:00:13.0: PCI INT A disabled
[ 1.736135] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.736240] pci 0000:00:13.2: PCI INT B disabled
[ 1.736316] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.816059] pci 0000:00:14.5: PCI INT C disabled
[ 1.816132] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.896065] pci 0000:00:16.0: PCI INT A disabled
[ 1.896133] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.896238] pci 0000:00:16.2: PCI INT B disabled
[ 1.896322] pci 0000:01:00.0: Boot video device
[ 1.896347] pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.896454] pci 0000:03:00.0: PCI INT A disabled
[ 1.896519] PCI: CLS 64 bytes, default 64
[ 1.896617] Unpacking initramfs...
[ 2.158471] Freeing initrd memory: 11532k freed
[ 2.161631] PCI-DMA: Disabling AGP.
[ 2.161766] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 2.161821] PCI-DMA: using GART IOMMU.
[ 2.161869] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 2.166416] perf: AMD IBS detected (0x000000ff)
[ 2.166665] audit: initializing netlink socket (disabled)
[ 2.166724] type=2000 audit(1342109185.160:1): initialized
[ 2.189187] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.211761] VFS: Disk quotas dquot_6.5.2
[ 2.211849] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.211970] msgmni has been set to 15975
[ 2.212227] alg: No test for stdrng (krng)
[ 2.212316] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.212371] io scheduler noop registered
[ 2.212419] io scheduler deadline registered
[ 2.212500] io scheduler cfq registered (default)
[ 2.212649] pcieport 0000:00:02.0: setting latency timer to 64
[ 2.212676] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 2.212733] pcieport 0000:00:09.0: setting latency timer to 64
[ 2.212755] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
[ 2.212806] pcieport 0000:00:0a.0: setting latency timer to 64
[ 2.212828] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 2.212884] pcieport 0000:00:15.0: setting latency timer to 64
[ 2.212926] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
[ 2.212987] pcieport 0000:00:15.1: setting latency timer to 64
[ 2.213031] pcieport 0000:00:15.1: irq 44 for MSI/MSI-X
[ 2.213111] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 2.213160] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.213208] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 2.213257] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 2.213271] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 2.213319] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.213367] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 2.213416] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 2.213428] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 2.213477] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 2.213526] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 2.213543] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 2.213591] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 2.213641] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 2.213658] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 2.213707] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 2.213757] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 2.213773] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.213842] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.213890] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.214218] ERST: Table is not found!
[ 2.214266] GHES: HEST is not enabled!
[ 2.214378] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.234841] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.416995] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.452448] Linux agpgart interface v0.103
[ 2.452746] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.452802] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.453024] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.453289] mousedev: PS/2 mouse device common for all mice
[ 2.453412] rtc_cmos 00:03: RTC can wake from S4
[ 2.453617] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.453699] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.453771] cpuidle: using governor ladder
[ 2.453825] cpuidle: using governor menu
[ 2.454262] TCP cubic registered
[ 2.454490] NET: Registered protocol family 10
[ 2.455539] Mobile IPv6
[ 2.455592] NET: Registered protocol family 17
[ 2.455649] Registering the dns_resolver key type
[ 2.455951] PM: Hibernation image not present or could not be loaded.
[ 2.455970] registered taskstats version 1
[ 2.475355] rtc_cmos 00:03: setting system clock to 2012-07-12 16:06:26 UTC (1342109186)
[ 2.475491] Initializing network drop monitor service
[ 2.477957] Freeing unused kernel memory: 572k freed
[ 2.478240] Write protecting the kernel read-only data: 6144k
[ 2.483639] Freeing unused kernel memory: 668k freed
[ 2.489266] Freeing unused kernel memory: 684k freed
[ 2.498050] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.509022] udevd[75]: starting version 175
[ 2.523872] usbcore: registered new interface driver usbfs
[ 2.523940] usbcore: registered new interface driver hub
[ 2.529968] usbcore: registered new device driver usb
[ 2.530039] SCSI subsystem initialized
[ 2.530894] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.530964] xhci_hcd 0000:03:00.0: setting latency timer to 64
[ 2.530968] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 2.531037] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[ 2.533716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.533808] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.533893] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.533966] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 2
[ 2.534045] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.534133] QUIRK: Enable AMD PLL fix
[ 2.534146] ehci_hcd 0000:00:12.2: debug port 1
[ 2.534236] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe4ff800
[ 2.535303] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.535382] firewire_ohci 0000:02:00.0: setting latency timer to 64
[ 2.535685] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.535770] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.535869] r8169 0000:06:00.0: setting latency timer to 64
[ 2.535954] r8169 0000:06:00.0: irq 45 for MSI/MSI-X
[ 2.536526] r8169 0000:06:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c78000, 54:04:a6:b6:bd:e5, XID 0c900800 IRQ 45
[ 2.536598] r8169 0000:06:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.543545] xhci_hcd 0000:03:00.0: irq 18, io mem 0xfe7f8000
[ 2.543655] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[ 2.543661] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[ 2.543667] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[ 2.543672] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[ 2.543679] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
[ 2.543684] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
[ 2.543689] xhci_hcd 0000:03:00.0: irq 52 for MSI/MSI-X
[ 2.543897] libata version 3.00 loaded.
[ 2.543906] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.543963] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.544045] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.544074] usb usb1: Product: xHCI Host Controller
[ 2.544076] usb usb1: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
[ 2.544078] usb usb1: SerialNumber: 0000:03:00.0
[ 2.544180] xHCI xhci_add_endpoint called for root hub
[ 2.544181] xHCI xhci_check_bandwidth called for root hub
[ 2.544215] hub 1-0:1.0: USB hub found
[ 2.544225] hub 1-0:1.0: 2 ports detected
[ 2.544312] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 2.544320] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 2.544345] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.544347] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.544349] usb usb3: Product: xHCI Host Controller
[ 2.544351] usb usb3: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
[ 2.544353] usb usb3: SerialNumber: 0000:03:00.0
[ 2.544428] xHCI xhci_add_endpoint called for root hub
[ 2.544429] xHCI xhci_check_bandwidth called for root hub
[ 2.544460] hub 3-0:1.0: USB hub found
[ 2.544470] hub 3-0:1.0: 2 ports detected
[ 2.544834] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.544884] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.544944] usb usb2: Product: EHCI Host Controller
[ 2.544993] usb usb2: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 2.545042] usb usb2: SerialNumber: 0000:00:12.2
[ 2.545327] hub 2-0:1.0: USB hub found
[ 2.545382] hub 2-0:1.0: 5 ports detected
[ 2.545613] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.545679] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.545737] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 2.545799] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.545873] ehci_hcd 0000:00:13.2: debug port 1
[ 2.545934] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe4ff400
[ 2.556071] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.556145] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.556194] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.556248] usb usb4: Product: EHCI Host Controller
[ 2.556295] usb usb4: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 2.556342] usb usb4: SerialNumber: 0000:00:13.2
[ 2.556537] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.556568] hub 4-0:1.0: USB hub found
[ 2.556573] hub 4-0:1.0: 5 ports detected
[ 2.556654] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.556674] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 2.556681] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 2.556691] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.556715] ehci_hcd 0000:00:16.2: debug port 1
[ 2.556730] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe4ff000
[ 2.568066] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.568153] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.568205] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.568263] usb usb5: Product: EHCI Host Controller
[ 2.568311] usb usb5: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 2.568364] usb usb5: SerialNumber: 0000:00:16.2
[ 2.568601] hub 5-0:1.0: USB hub found
[ 2.568653] hub 5-0:1.0: 4 ports detected
[ 2.568785] ahci 0000:00:11.0: version 3.0
[ 2.568812] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.568986] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 2.569041] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.569783] scsi0 : ahci
[ 2.570058] scsi1 : ahci
[ 2.570203] scsi2 : ahci
[ 2.570331] scsi3 : ahci
[ 2.570457] scsi4 : ahci
[ 2.570577] scsi5 : ahci
[ 2.570673] ata1: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffd00 irq 19
[ 2.570728] ata2: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffd80 irq 19
[ 2.570783] ata3: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffe00 irq 19
[ 2.570840] ata4: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4ffe80 irq 19
[ 2.570901] ata5: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4fff00 irq 19
[ 2.570955] ata6: SATA max UDMA/133 abar m1024@0xfe4ffc00 port 0xfe4fff80 irq 19
[ 2.571036] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.571101] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.571156] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 2.571228] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe4fe000
[ 2.596123] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 2.596226] pata_via 0000:02:00.1: version 0.3.4
[ 2.596251] pata_via 0000:02:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.596421] pata_via 0000:02:00.1: setting latency timer to 64
[ 2.597121] scsi6 : pata_via
[ 2.597331] scsi7 : pata_via
[ 2.597670] ata7: PATA max UDMA/133 cmd 0xdc00 ctl 0xd480 bmdma 0xd000 irq 17
[ 2.597727] ata8: PATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 17
[ 2.628095] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.628154] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.628215] usb usb6: Product: OHCI Host Controller
[ 2.628269] usb usb6: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[ 2.628324] usb usb6: SerialNumber: 0000:00:12.0
[ 2.628588] hub 6-0:1.0: USB hub found
[ 2.628649] hub 6-0:1.0: 5 ports detected
[ 2.628831] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.628937] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.629003] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 2.629086] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe4fd000
[ 2.688068] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.688126] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.688188] usb usb7: Product: OHCI Host Controller
[ 2.688241] usb usb7: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[ 2.688296] usb usb7: SerialNumber: 0000:00:13.0
[ 2.688565] hub 7-0:1.0: USB hub found
[ 2.688626] hub 7-0:1.0: 5 ports detected
[ 2.688816] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.688897] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.688962] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 2.689050] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe4fc000
[ 2.748079] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.748137] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.748198] usb usb8: Product: OHCI Host Controller
[ 2.748252] usb usb8: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[ 2.748306] usb usb8: SerialNumber: 0000:00:14.5
[ 2.748559] hub 8-0:1.0: USB hub found
[ 2.748620] hub 8-0:1.0: 2 ports detected
[ 2.748813] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.748894] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.748965] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 2.749049] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe4f3000
[ 2.808099] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.808157] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.808218] usb usb9: Product: OHCI Host Controller
[ 2.808271] usb usb9: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[ 2.808325] usb usb9: SerialNumber: 0000:00:16.0
[ 2.808597] hub 9-0:1.0: USB hub found
[ 2.808658] hub 9-0:1.0: 4 ports detected
[ 2.888111] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.024058] usb 7-1: new low-speed USB device number 2 using ohci_hcd
[ 3.060061] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.060150] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.060244] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.060328] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.060408] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.060831] ata3.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[ 3.060890] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.064916] ata2.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
[ 3.064916] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.067603] ata6.00: ATAPI: PIONEER BD-RW BDR-207D, 1.10, max UDMA/100
[ 3.067763] ata5.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 3.067821] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.068296] ata3.00: configured for UDMA/133
[ 3.068386] ata2.00: configured for UDMA/133
[ 3.071481] ata5.00: configured for UDMA/133
[ 3.071562] ata6.00: configured for UDMA/100
[ 3.072337] ata1.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133
[ 3.072394] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.082223] ata1.00: configured for UDMA/133
[ 3.082517] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.15 PQ: 0 ANSI: 5
[ 3.083037] scsi 1:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5
[ 3.083507] scsi 2:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[ 3.083939] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 3.090932] scsi 5:0:0:0: CD-ROM PIONEER BD-RW BDR-207D 1.10 PQ: 0 ANSI: 5
[ 3.096197] firewire_core: created device fw0: GUID 001e8c0000346448, S400
[ 3.164060] Refined TSC clocksource calibration: 3314.838 MHz.
[ 3.164128] Switching to clocksource tsc
[ 3.193134] usb 7-1: New USB device found, idVendor=046d, idProduct=c03d
[ 3.193194] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.193250] usb 7-1: Product: USB-PS/2 Optical Mouse
[ 3.193304] usb 7-1: Manufacturer: Logitech
[ 3.250442] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/input/input1
[ 3.250659] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1/input0
[ 3.250749] usbcore: registered new interface driver usbhid
[ 3.250803] usbhid: USB HID core driver
[ 3.260699] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 3.260795] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.260866] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.260933] sd 0:0:0:0: [sda] Write Protect is off
[ 3.260952] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.261049] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.261056] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.261080] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.261086] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.261110] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.261138] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.261286] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.261366] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.261917] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.261982] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[ 3.262203] sd 4:0:0:0: [sdd] Write Protect is off
[ 3.262267] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.262322] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.263496] sda: sda1
[ 3.264108] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.278875] sr0: scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray
[ 3.278936] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.279239] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 3.280966] sdb: sdb1
[ 3.281547] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.308944] sdc: sdc1
[ 3.309533] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.680870] sdd: sdd1
[ 3.681451] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 4.280075] raid6: int64x1 682 MB/s
[ 4.348050] raid6: int64x2 824 MB/s
[ 4.416018] raid6: int64x4 1422 MB/s
[ 4.484039] raid6: int64x8 1708 MB/s
[ 4.552018] raid6: sse2x1 3740 MB/s
[ 4.620019] raid6: sse2x2 7346 MB/s
[ 4.688016] raid6: sse2x4 9225 MB/s
[ 4.688064] raid6: using algorithm sse2x4 (9225 MB/s)
[ 4.688269] async_tx: api initialized (async)
[ 4.688442] xor: automatically using best checksumming function: generic_sse
[ 4.708015] generic_sse: 8755.000 MB/sec
[ 4.708064] xor: using function: generic_sse (8755.000 MB/sec)
[ 4.709055] md: raid6 personality registered for level 6
[ 4.709103] md: raid5 personality registered for level 5
[ 4.709151] md: raid4 personality registered for level 4
[ 4.756545] mdadm: sending ioctl 800c0910 to a partition!
[ 4.756609] mdadm: sending ioctl 800c0910 to a partition!
[ 4.756669] mdadm: sending ioctl 1261 to a partition!
[ 4.756723] mdadm: sending ioctl 1261 to a partition!
[ 4.757392] mdadm: sending ioctl 800c0910 to a partition!
[ 4.757451] mdadm: sending ioctl 800c0910 to a partition!
[ 4.757510] mdadm: sending ioctl 1261 to a partition!
[ 4.757565] mdadm: sending ioctl 1261 to a partition!
[ 4.760035] mdadm: sending ioctl 800c0910 to a partition!
[ 4.760093] mdadm: sending ioctl 800c0910 to a partition!
[ 4.768556] md: md1 stopped.
[ 4.770078] md: bind<sdb1>
[ 4.770441] md: bind<sdc1>
[ 4.770737] md: bind<sdd1>
[ 4.773180] bio: create slab <bio-1> at 1
[ 4.773255] md/raid:md1: device sdd1 operational as raid disk 0
[ 4.773311] md/raid:md1: device sdc1 operational as raid disk 2
[ 4.773366] md/raid:md1: device sdb1 operational as raid disk 1
[ 4.774109] md/raid:md1: allocated 3228kB
[ 4.774207] md/raid:md1: raid level 5 active with 3 out of 3 devices, algorithm 2
[ 4.774266] RAID conf printout:
[ 4.774268] --- level:5 rd:3 wd:3
[ 4.774271] disk 0, o:1, dev:sdd1
[ 4.774273] disk 1, o:1, dev:sdb1
[ 4.774276] disk 2, o:1, dev:sdc1
[ 4.774285] md1: Warning: Device sdb1 is misaligned
[ 4.774363] md1: detected capacity change from 0 to 4000792444928
[ 4.776208] md1: unknown partition table
[ 4.778546] device-mapper: uevent: version 1.0.3
[ 4.778662] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 5.042171] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.455981] udevd[382]: starting version 175
[ 5.525168] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.525229] ACPI: Power Button [PWRB]
[ 5.525365] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.525423] ACPI: Power Button [PWRF]
[ 5.526929] ACPI: acpi_idle registered with cpuidle
[ 5.527520] wmi: Mapper loaded
[ 5.545368] ATK0110 ATK0110:00: EC enabled
[ 5.576355] EDAC MC: Ver: 2.1.0
[ 5.580477] MCE: In-kernel MCE decoding enabled.
[ 5.580962] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 5.581024] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.581437] Linux media interface: v0.10
[ 5.581794] AMD64 EDAC driver v3.4.0
[ 5.582558] EDAC amd64: DRAM ECC disabled.
[ 5.582618] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.582619] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 5.582620] (Note that use of the override may cause unknown side effects.)
[ 5.582853] IR NEC protocol handler initialized
[ 5.582902] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.583160] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.583299] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 5.587135] Linux video capture interface: v2.00
[ 5.588267] IR RC5(x) protocol handler initialized
[ 5.591486] IR RC6 protocol handler initialized
[ 5.593527] IR JVC protocol handler initialized
[ 5.596203] IR Sony protocol handler initialized
[ 5.597925] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 5.599617] IR MCE Keyboard/mouse protocol handler initialized
[ 5.604130] lirc_dev: IR Remote Control driver registered, major 249
[ 5.604803] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.605372] IR LIRC bridge handler initialized
[ 5.610056] powernow-k8: Found 1 AMD FX(tm)-6100 Six-Core Processor (6 cpu cores) (version 2.20.00)
[ 5.610129] powernow-k8: Core Performance Boosting: on.
[ 5.610239] powernow-k8: 0 : pstate 0 (3300 MHz)
[ 5.610326] powernow-k8: 1 : pstate 1 (3000 MHz)
[ 5.610381] powernow-k8: 2 : pstate 2 (2400 MHz)
[ 5.610430] powernow-k8: 3 : pstate 3 (1800 MHz)
[ 5.610486] powernow-k8: 4 : pstate 4 (1400 MHz)
[ 5.614203] cx23885 driver version 0.0.3 loaded
[ 5.614288] cx23885 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.620928] CORE cx23885[0]: subsystem: 0070:7911, board: Hauppauge WinTV-HVR1250 [card=3,autodetected]
[ 5.656913] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 5.658085] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.658275] snd_hda_intel 0000:01:00.1: irq 53 for MSI/MSI-X
[ 5.658323] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 5.676376] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 5.676619] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6
[ 5.748061] tveeprom 0-0050: Hauppauge model 79001, rev E1D9, serial# 3463031
[ 5.748124] tveeprom 0-0050: MAC address is 00:0d:fe:34:d7:77
[ 5.748180] tveeprom 0-0050: tuner model is Microtune MT2131 (idx 139, type 4)
[ 5.748242] tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
[ 5.748305] tveeprom 0-0050: audio processor is CX23885 (idx 39)
[ 5.748359] tveeprom 0-0050: decoder processor is CX23885 (idx 33)
[ 5.748414] tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter
[ 5.748475] cx23885[0]: hauppauge eeprom: model=79001
[ 5.748530] cx23885_dvb_register() allocating 1 frontend(s)
[ 5.748603] cx23885[0]: cx23885 based dvb card
[ 5.786838] MT2131: successfully identified at address 0x61
[ 5.786888] DVB: registering new adapter (cx23885[0])
[ 5.786938] DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
[ 5.787308] cx23885_dev_checkrevision() Hardware revision = 0xa4
[ 5.787360] cx23885[0]/0: found at 0000:05:00.0, rev: 3, irq: 16, latency: 0, mmio: 0xfe800000
[ 5.787418] cx23885 0000:05:00.0: setting latency timer to 64
[ 6.323191] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 6.382689] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 6.420733] loop: module loaded
[ 7.182338] Adding 1048572k swap on /var/swap1. Priority:1 extents:8 across:1114108k SS
[ 7.222120] Adding 1048572k swap on /var/swap2. Priority:1 extents:3 across:1187836k SS
[ 7.770637] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.214220] Bridge firewalling registered
[ 8.219513] device eth0 entered promiscuous mode
[ 8.325063] r8169 0000:06:00.0: eth0: link down
[ 8.325128] r8169 0000:06:00.0: eth0: link down
[ 8.326794] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.333528] ADDRCONF(NETDEV_UP): br0: link is not ready
[ 11.393524] r8169 0000:06:00.0: eth0: link up
[ 11.395163] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.395599] br0: port 1(eth0) entering forwarding state
[ 11.395657] br0: port 1(eth0) entering forwarding state
[ 11.397288] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 13.641994] kvm: Nested Virtualization enabled
[ 13.642063] kvm: Nested Paging enabled
[ 13.821967] RPC: Registered named UNIX socket transport module.
[ 13.822030] RPC: Registered udp transport module.
[ 13.822084] RPC: Registered tcp transport module.
[ 13.822137] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.833652] FS-Cache: Loaded
[ 13.845927] FS-Cache: Netfs 'nfs' registered for caching
[ 13.853812] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.122071] fuse init (API version 7.17)
[ 26.631752] [drm] Initialized drm 1.1.0 20060810
[ 26.651574] [drm] radeon kernel modesetting enabled.
[ 26.651812] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 26.651872] radeon 0000:01:00.0: setting latency timer to 64
[ 26.652195] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1458:0x2547).
[ 26.652311] [drm] register mmio base: 0xFE5E0000
[ 26.652364] [drm] register mmio size: 131072
[ 26.660269] ATOM BIOS: GV
[ 26.660694] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 26.660756] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 26.685141] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 26.685208] [drm] RAM width 64bits DDR
[ 26.685340] [TTM] Zone kernel: Available graphics memory: 4090688 kiB.
[ 26.685397] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 26.685445] [TTM] Initializing pool allocator.
[ 26.685512] [drm] radeon: 1024M of VRAM memory ready
[ 26.685560] [drm] radeon: 512M of GTT memory ready.
[ 26.685623] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 26.685670] [drm] Driver supports precise vblank timestamp query.
[ 26.685765] radeon 0000:01:00.0: irq 54 for MSI/MSI-X
[ 26.685770] radeon 0000:01:00.0: radeon: using MSI.
[ 26.685871] [drm] radeon: irq initialized.
[ 26.685921] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 26.686418] [drm] Loading CAICOS Microcode
[ 26.710018] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 26.710220] radeon 0000:01:00.0: WB enabled
[ 26.726706] [drm] ring test succeeded in 2 usecs
[ 26.726990] [drm] radeon: ib pool ready.
[ 26.727201] [drm] ib test succeeded in 0 usecs
[ 26.727905] [drm] Radeon Display Connectors
[ 26.727962] [drm] Connector 0:
[ 26.728037] [drm] HDMI-A
[ 26.728091] [drm] HPD2
[ 26.728145] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 26.728208] [drm] Encoders:
[ 26.728262] [drm] DFP1: INTERNAL_UNIPHY1
[ 26.728316] [drm] Connector 1:
[ 26.728371] [drm] DVI-D
[ 26.728424] [drm] HPD4
[ 26.728479] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 26.728541] [drm] Encoders:
[ 26.728593] [drm] DFP2: INTERNAL_UNIPHY
[ 26.728646] [drm] Connector 2:
[ 26.728697] [drm] VGA
[ 26.728749] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 26.728810] [drm] Encoders:
[ 26.728862] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 26.728971] [drm] Internal thermal controller with fan control
[ 26.730068] [drm] radeon: power management initialized
[ 26.965199] [drm] fb mappable at 0xD0142000
[ 26.965246] [drm] vram apper at 0xD0000000
[ 26.965288] [drm] size 8294400
[ 26.965329] [drm] fb depth is 24
[ 26.965371] [drm] pitch is 7680
[ 26.965612] fbcon: radeondrmfb (fb0) is primary device
[ 27.395247] Console: switching to colour frame buffer device 240x67
[ 27.411908] fb0: radeondrmfb frame buffer device
[ 27.411911] drm: registered panic notifier
[ 27.412174] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 53.964435] gnome-settings-[1942]: segfault at 8 ip 00007f959c021118 sp 00007fff894cf000 error 4 in libpower.so[7f959c010000+19000]
[ 122.871132] Bluetooth: Core ver 2.16
[ 122.871163] NET: Registered protocol family 31
[ 122.871168] Bluetooth: HCI device and connection manager initialized
[ 122.871173] Bluetooth: HCI socket layer initialized
[ 122.871176] Bluetooth: L2CAP socket layer initialized
[ 122.871185] Bluetooth: SCO socket layer initialized
[ 122.874608] Bluetooth: RFCOMM TTY layer initialized
[ 122.874621] Bluetooth: RFCOMM socket layer initialized
[ 122.874625] Bluetooth: RFCOMM ver 1.11
[ 122.901171] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 122.901178] Bluetooth: BNEP filters: protocol multicast
Reply to: