Bug#659110: xserver-xorg-video-nouveau: Hibernate restore/thawing causes blank sscreen and unresponsive keyboard
8 feb 2012 kl. 22.58 skrev Sven Joachim:
> On 2012-02-08 22:33 +0100, Rikard Mustajärvi wrote:
>
>> Thanks for your comment. How far away is the 3.2 kernel in
>> testing(wheezy?
>
> It should hopefully migrate soon, but I'm not involved in that process.
>
>> Or is there another way?
>
> Download the package from
> http://packages.debian.org/sid/amd64/linux-image-3.2.0-1-amd64/download,
> install it with "dpkg -i" and reboot.
>
> Cheers,
> Sven
Ok, tried it but no luck. The following is from an SSH session while the machine is blanked out.
rikard@bergarn:~$ uname -a
Linux bergarn 3.2.0-1-amd64 #1 SMP Sun Feb 5 15:17:15 UTC 2012 x86_64 GNU/Linux
rikard@bergarn:~$ dmesg
<reming rows until hibernation is initialized>
[ 268.378066] wlan0: deauthenticating from 30:46:9a:7d:4c:8e by local choice (reason=3)
[ 268.542698] cfg80211: Calling CRDA to update world regulatory domain
[ 268.554180] cfg80211: World regulatory domain updated:
[ 268.554189] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 268.554197] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 268.554204] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 268.554211] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 268.554217] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 268.554223] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 269.766317] jme 0000:03:00.0: irq 53 for MSI/MSI-X
[ 269.789189] jme 0000:03:00.0: eth0: Link is down
[ 269.791968] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 269.814884] jme 0000:03:00.0: irq 53 for MSI/MSI-X
[ 269.841059] jme 0000:03:00.0: eth0: Link is down
[ 269.843826] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 270.131973] jme 0000:03:00.0: irq 53 for MSI/MSI-X
[ 270.156626] jme 0000:03:00.0: eth0: Link is down
[ 270.159393] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 270.327947] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[ 270.327951] PM: Marking nosave pages: 00000000ced05000 - 00000000ced48000
[ 270.327953] PM: Marking nosave pages: 00000000cefbd000 - 00000000cf168000
[ 270.327959] PM: Marking nosave pages: 00000000cf3c7000 - 0000000100000000
[ 270.328563] PM: Basic memory bitmaps created
[ 270.580817] Syncing filesystems ... done.
[ 270.581254] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 270.595522] PM: Preallocating image memory... done (allocated 4006668 pages)
[ 272.281674] PM: Allocated 16026672 kbytes in 1.68 seconds (9539.68 MB/s)
[ 272.281675] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 272.296930] Suspending console(s) (use no_console_suspend to debug)
[ 272.297323] [drm] nouveau 0000:01:00.0: Disabling fbcon acceleration...
[ 272.297325] [drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
[ 272.297330] jmb38x_ms 0000:03:00.3: PCI INT B disabled
[ 272.297338] pci 0000:00:1f.3: PCI INT C disabled
[ 272.297386] [drm] nouveau 0000:01:00.0: Evicting buffers...
[ 272.398910] [drm] nouveau 0000:01:00.0: Idling channels...
[ 272.399073] [drm] nouveau 0000:01:00.0: Suspending GPU objects...
[ 272.500400] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 272.605223] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[ 272.744059] snd_hda_intel 0000:01:00.1: PCI INT B disabled
[ 272.744114] ACPI handle has no context!
[ 273.477438] [drm] nouveau 0000:01:00.0: And we're gone!
[ 273.477499] PM: freeze of devices complete after 1182.323 msecs
[ 273.477998] PM: late freeze of devices complete after 0.498 msecs
[ 273.478257] ACPI: Preparing to enter system sleep state S4
[ 273.504991] PM: Saving platform NVS memory
[ 273.511655] Disabling non-boot CPUs ...
[ 273.614819] CPU 1 is now offline
[ 273.718662] CPU 2 is now offline
[ 273.822509] CPU 3 is now offline
[ 273.926351] CPU 4 is now offline
[ 274.030200] CPU 5 is now offline
[ 274.134048] CPU 6 is now offline
[ 274.237883] CPU 7 is now offline
[ 274.238267] Extended CMOS year: 2000
[ 274.238346] PM: Creating hibernation image:
[ 274.438931] PM: Need to copy 159600 pages
[ 274.438933] PM: Normal pages needed: 159600 + 1024, available pages: 4028645
[ 274.238371] PM: Restoring platform NVS memory
[ 274.239135] Extended CMOS year: 2000
[ 274.239171] Enabling non-boot CPUs ...
[ 274.239296] Booting Node 0 Processor 1 APIC 0x2
[ 274.239297] smpboot cpu 1: start_ip = 98000
[ 274.250210] Calibrating delay loop (skipped) already calibrated this CPU
[ 274.270523] NMI watchdog enabled, takes one hw-pmu counter.
[ 274.270807] CPU1 is up
[ 274.270984] Booting Node 0 Processor 2 APIC 0x4
[ 274.270985] smpboot cpu 2: start_ip = 98000
[ 274.281897] Calibrating delay loop (skipped) already calibrated this CPU
[ 274.302240] NMI watchdog enabled, takes one hw-pmu counter.
[ 274.302509] CPU2 is up
[ 274.302907] Booting Node 0 Processor 3 APIC 0x6
[ 274.302908] smpboot cpu 3: start_ip = 98000
[ 274.313827] Calibrating delay loop (skipped) already calibrated this CPU
[ 274.334210] NMI watchdog enabled, takes one hw-pmu counter.
[ 274.334516] CPU3 is up
[ 274.334823] Booting Node 0 Processor 4 APIC 0x1
[ 274.334824] smpboot cpu 4: start_ip = 98000
[ 274.345734] Calibrating delay loop (skipped) already calibrated this CPU
[ 274.366106] NMI watchdog enabled, takes one hw-pmu counter.
[ 274.366379] CPU4 is up
[ 274.366468] Booting Node 0 Processor 5 APIC 0x3
[ 274.366469] smpboot cpu 5: start_ip = 98000
[ 274.377383] Calibrating delay loop (skipped) already calibrated this CPU
[ 274.397773] NMI watchdog enabled, takes one hw-pmu counter.
[ 274.398025] CPU5 is up
[ 274.398223] Booting Node 0 Processor 6 APIC 0x5
[ 274.398224] smpboot cpu 6: start_ip = 98000
[ 274.409136] Calibrating delay loop (skipped) already calibrated this CPU
[ 274.429754] NMI watchdog enabled, takes one hw-pmu counter.
[ 274.430019] CPU6 is up
[ 274.430144] Booting Node 0 Processor 7 APIC 0x7
[ 274.430145] smpboot cpu 7: start_ip = 98000
[ 274.441056] Calibrating delay loop (skipped) already calibrated this CPU
[ 274.461777] NMI watchdog enabled, takes one hw-pmu counter.
[ 274.462064] CPU7 is up
[ 274.468358] ACPI: Waking up from system sleep state S4
[ 274.510877] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 274.511106] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[ 274.511184] snd_hda_intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 274.511352] jme 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[ 274.526412] firewire_ohci 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 274.526500] PM: early restore of devices complete after 15.777 msecs
[ 274.538587] power_supply BAT0: parent PNP0C0A:00 should not be sleeping
[ 274.587213] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 274.587224] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 274.587231] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 274.587233] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 274.587236] usb usb1: root hub lost power or was reset
[ 274.587244] usb usb2: root hub lost power or was reset
[ 274.587266] pci 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 274.587271] [drm] nouveau 0000:01:00.0: We're back, enabling device...
[ 274.587274] ahci 0000:00:1f.2: setting latency timer to 64
[ 274.587283] nouveau 0000:01:00.0: setting latency timer to 64
[ 274.587286] [drm] nouveau 0000:01:00.0: POSTing device...
[ 274.587289] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x7D74
[ 274.587314] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 274.587324] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 274.587329] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 274.587389] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 274.587454] usb usb3: root hub lost power or was reset
[ 274.587456] usb usb4: root hub lost power or was reset
[ 274.587486] jmb38x_ms 0000:03:00.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 274.587541] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
[ 274.587545] jmb38x_ms 0000:03:00.3: setting latency timer to 64
[ 274.591130] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 274.591133] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 274.598785] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
[ 274.598790] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[ 274.598794] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 274.598798] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 274.598801] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 274.598805] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 274.598809] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 274.598813] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[ 274.598868] sd 0:0:0:0: [sda] Starting disk
[ 274.610695] jme 0000:03:00.0: eth0: Link is down
[ 274.637758] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x8497
[ 274.642187] firewire_core: skipped bus generations, destroying all nodes
[ 274.670336] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x9AD6
[ 274.670588] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x9AE0
[ 274.671489] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x9CB5
[ 274.671490] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x9D1A
[ 274.905702] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 274.906513] ata1.00: configured for UDMA/100
[ 274.913688] ata4: SATA link down (SStatus 0 SControl 300)
[ 274.921678] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 274.926283] ata3.00: configured for UDMA/100
[ 274.937654] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[ 275.141348] firewire_core: rediscovered device fw0
[ 275.181291] usb 2-1: reset high-speed USB device number 2 using ehci_hcd
[ 275.592826] usb 2-1.6: reset high-speed USB device number 4 using ehci_hcd
[ 275.760578] usb 2-1.5: reset full-speed USB device number 3 using ehci_hcd
[ 276.657376] [drm] nouveau 0000:01:00.0: 0x9D1A: Condition still not met after 2000ms, skipping following opcodes
[ 276.658673] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[ 276.696616] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[ 276.697148] [drm] nouveau 0000:01:00.0: Restoring mode...
[ 278.696905] [drm] nouveau 0000:01:00.0: timeout: CURSOR_CTRL2_STATUS_ACTIVE(0)
[ 278.696958] [drm] nouveau 0000:01:00.0: CURSOR_CTRL2(0) = 0x00000000
[ 280.702620] PM: restore of devices complete after 6124.590 msecs
[ 280.748510] snapshot_ioctl: ioctl '4004330c' is deprecated and will be removed soon, update your suspend-to-disk utilities
[ 280.748513] Restarting tasks ... done.
[ 280.799787] PM: Basic memory bitmaps freed
[ 280.806301] video LNXVIDEO:00: Restoring backlight state
[ 283.336962] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 283.343602] iwlwifi 0000:04:00.0: Radio type=0x1-0x2-0x0
[ 283.475514] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 286.333321] jme 0000:03:00.0: irq 53 for MSI/MSI-X
[ 286.357309] jme 0000:03:00.0: eth0: Link is down
[ 286.360082] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 291.309003] wlan0: authenticate with 30:46:9a:7d:4c:8e (try 1)
[ 291.311801] wlan0: authenticated
[ 291.312170] wlan0: associate with 30:46:9a:7d:4c:8e (try 1)
[ 291.315575] wlan0: RX AssocResp from 30:46:9a:7d:4c:8e (capab=0x411 status=0 aid=1)
[ 291.315577] wlan0: associated
[ 291.321130] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 301.829611] wlan0: no IPv6 routers present
Reply to: