--- Begin Message ---
Package: xserver-xorg
Version: 1:7.6+9
Severity: important
Dear Maintainer,
since my last package update, my X session has been crashing each time I try to play a video through XV extension (with x11 extension, the session
does not crash).
There is a segmentation fault appearing in the Xorg.0.log file. The backtrace is:
[ 585.688] 0: /usr/bin/X (xorg_backtrace+0x26) [0x7fc5940098f6]
[ 585.688] 1: /usr/bin/X (0x7fc593e85000+0x188559) [0x7fc59400d559]
[ 585.689] 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7fc5931ad000+0xf020) [0x7fc5931bc020]
[ 585.689] 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xs111LookupPrivate+0x22) [0x7fc58fab0c72]
[ 585.689] 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xclLookupPrivate+0xd) [0x7fc58f48375d]
[ 585.689] 5: /usr/lib/xorg/modules/amdxmm.so (X740XvPutImage+0x12e) [0x7fc58c7f28de]
[ 585.689] 6: /usr/bin/X (0x7fc593e85000+0xa693e) [0x7fc593f2b93e]
[ 585.689] 7: /usr/lib/xorg/modules/extensions/libextmod.so (0x7fc590fb1000+0x12e02) [0x7fc590fc3e02]
[ 585.689] 8: /usr/bin/X (0x7fc593e85000+0x51f59) [0x7fc593ed6f59]
[ 585.689] 9: /usr/bin/X (0x7fc593e85000+0x411ba) [0x7fc593ec61ba]
[ 585.689] 10: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xfd) [0x7fc591ed8ead]
[ 585.689] 11: /usr/bin/X (0x7fc593e85000+0x414ad) [0x7fc593ec64ad]
[ 585.689] Segmentation fault at address 0x20
[ 585.689]
Fatal server error:
[ 585.689] Caught signal 11 (Segmentation fault). Server aborting
(the full content of a Xorg.0.log with the segmentation fault file is included at the end of the report).
xvinfo does not report any problem:
$ xvinfo -short
X-Video Extension version 2.2
screen #0
Adaptor #0: "AMD Radeon AVIVO Video"
number of ports: 4
port base: 143
operations supported: PutImage
number of attributes: 10
[...]
Feel free to contact me for any additional information.
Thank you.
Best regards,
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Jun 11 16:26 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2056592 Nov 2 07:18 /usr/bin/Xorg
Diversions concerning libGL are in place
----------------------------------------
diversion of /usr/lib/libGL.so to /usr/lib/mesa-diverted/libGL.so by glx-diversions
diversion of /usr/lib/libGL.so.1 to /usr/lib/mesa-diverted/libGL.so.1 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/i386-linux-gnu/libGL.so to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib32/libGL.so.1 to /usr/lib32/fglrx/diversions/libGL.so.1 by fglrx-glx-ia32
diversion of /usr/lib/i386-linux-gnu/libGL.so.1.2 to /usr/lib/mesa-diverted/i386-linux-gnu/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so.1 by glx-diversions
diversion of /usr/lib/libGL.so.1.2 to /usr/lib/mesa-diverted/libGL.so.1.2 by glx-diversions
diversion of /usr/lib/x86_64-linux-gnu/libGL.so to /usr/lib/mesa-diverted/x86_64-linux-gnu/libGL.so by glx-diversions
diversion of /usr/lib32/libGL.so.1.2 to /usr/lib32/fglrx/diversions/libGL.so.1.2 by fglrx-glx-ia32
VGA-compatible devices on PCI bus:
----------------------------------
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] [1002:9581]
Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 1715 Nov 19 22:45 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "UseInternalAGPGART" "no"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 2.6.34-1-amd64 (Debian 2.6.34-1~experimental.2) (ben@decadent.org.uk) (gcc version 4.4.4 (Debian 4.4.4-4) ) #1 SMP Sun Jun 6 22:29:25 UTC 2010
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 40402 Nov 19 22:49 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 437.164]
X.Org X Server 1.11.1.902 (1.11.2 RC 2)
Release Date: 2011-10-28
[ 437.164] X Protocol Version 11, Revision 0
[ 437.164] Build Operating System: Linux 3.1.0-rc4-amd64 x86_64 Debian
[ 437.164] Current Operating System: Linux Marmotao 2.6.34-1-amd64 #1 SMP Sun Jun 6 22:29:25 UTC 2010 x86_64
[ 437.165] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34-1-amd64 root=UUID=53306908-7764-425d-93c3-d3268b1a73e2 ro quiet pcie_aspm=force
[ 437.165] Build Date: 02 November 2011 10:15:50AM
[ 437.165] xorg-server 2:1.11.1.902-1 (Cyril Brulebois <kibi@debian.org>)
[ 437.165] Current version of pixman: 0.24.0
[ 437.165] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 437.165] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 437.165] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 19 22:46:17 2011
[ 437.165] (==) Using config file: "/etc/X11/xorg.conf"
[ 437.165] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 437.165] (==) ServerLayout "aticonfig Layout"
[ 437.165] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 437.165] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 437.165] (**) | |-->Device "aticonfig-Device[0]-0"
[ 437.165] (==) Automatically adding devices
[ 437.165] (==) Automatically enabling devices
[ 437.165] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 437.165] Entry deleted from font path.
[ 437.165] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 437.165] Entry deleted from font path.
[ 437.165] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 437.165] Entry deleted from font path.
[ 437.165] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 437.165] Entry deleted from font path.
[ 437.165] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 437.165] Entry deleted from font path.
[ 437.165] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 437.165] Entry deleted from font path.
[ 437.165] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 437.165] Entry deleted from font path.
[ 437.165] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 437.165] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 437.165] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 437.166] (II) Loader magic: 0x7fc594270ae0
[ 437.166] (II) Module ABI versions:
[ 437.166] X.Org ANSI C Emulation: 0.4
[ 437.166] X.Org Video Driver: 11.0
[ 437.166] X.Org XInput driver : 13.0
[ 437.166] X.Org Server Extension : 6.0
[ 437.167] (--) PCI:*(0:1:0:0) 1002:9581:103c:30c5 rev 0, Mem @ 0xd0000000/268435456, 0xe4400000/65536, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 437.167] (II) Open ACPI successful (/var/run/acpid.socket)
[ 437.167] (II) "extmod" will be loaded by default.
[ 437.167] (II) "dbe" will be loaded by default.
[ 437.167] (II) "glx" will be loaded by default.
[ 437.167] (II) "record" will be loaded by default.
[ 437.167] (II) "dri" will be loaded by default.
[ 437.167] (II) "dri2" will be loaded by default.
[ 437.167] (II) LoadModule: "extmod"
[ 437.167] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 437.168] (II) Module extmod: vendor="X.Org Foundation"
[ 437.168] compiled for 1.11.1.902, module version = 1.0.0
[ 437.168] Module class: X.Org Server Extension
[ 437.168] ABI class: X.Org Server Extension, version 6.0
[ 437.168] (II) Loading extension SELinux
[ 437.168] (II) Loading extension MIT-SCREEN-SAVER
[ 437.168] (II) Loading extension XFree86-VidModeExtension
[ 437.168] (II) Loading extension XFree86-DGA
[ 437.168] (II) Loading extension DPMS
[ 437.168] (II) Loading extension XVideo
[ 437.168] (II) Loading extension XVideo-MotionCompensation
[ 437.168] (II) Loading extension X-Resource
[ 437.168] (II) LoadModule: "dbe"
[ 437.168] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 437.168] (II) Module dbe: vendor="X.Org Foundation"
[ 437.168] compiled for 1.11.1.902, module version = 1.0.0
[ 437.168] Module class: X.Org Server Extension
[ 437.168] ABI class: X.Org Server Extension, version 6.0
[ 437.168] (II) Loading extension DOUBLE-BUFFER
[ 437.168] (II) LoadModule: "glx"
[ 437.168] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 437.168] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 437.168] compiled for 6.9.0, module version = 1.0.0
[ 437.169] (II) Loading extension GLX
[ 437.169] (II) LoadModule: "record"
[ 437.169] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 437.169] (II) Module record: vendor="X.Org Foundation"
[ 437.169] compiled for 1.11.1.902, module version = 1.13.0
[ 437.169] Module class: X.Org Server Extension
[ 437.169] ABI class: X.Org Server Extension, version 6.0
[ 437.169] (II) Loading extension RECORD
[ 437.169] (II) LoadModule: "dri"
[ 437.169] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 437.169] (II) Module dri: vendor="X.Org Foundation"
[ 437.169] compiled for 1.11.1.902, module version = 1.0.0
[ 437.169] ABI class: X.Org Server Extension, version 6.0
[ 437.169] (II) Loading extension XFree86-DRI
[ 437.169] (II) LoadModule: "dri2"
[ 437.170] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 437.170] (II) Module dri2: vendor="X.Org Foundation"
[ 437.170] compiled for 1.11.1.902, module version = 1.2.0
[ 437.170] ABI class: X.Org Server Extension, version 6.0
[ 437.170] (II) Loading extension DRI2
[ 437.170] (II) LoadModule: "fglrx"
[ 437.170] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 437.192] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 437.192] compiled for 1.4.99.906, module version = 8.91.4
[ 437.192] Module class: X.Org Video Driver
[ 437.192] (II) Loading sub module "fglrxdrm"
[ 437.192] (II) LoadModule: "fglrxdrm"
[ 437.192] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 437.193] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 437.193] compiled for 1.4.99.906, module version = 8.91.4
[ 437.193] (II) ATI Proprietary Linux Driver Version Identifier:8.91.4
[ 437.193] (II) ATI Proprietary Linux Driver Release Identifier: 8.911
[ 437.193] (II) ATI Proprietary Linux Driver Build Date: Oct 25 2011 21:24:13
[ 437.193] (++) using VT number 7
[ 437.198] (WW) Falling back to old probe method for fglrx
[ 437.208] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 437.209] (--) Chipset Supported AMD Graphics Processor (0x9581) found
[ 437.209] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 437.209] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 437.210] (II) AMD Video driver is signed
[ 437.210] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 437.210] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 437.210] (II) fglrx(0): pEnt->device->identifier=0x7fc594ecebf0
[ 437.210] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 437.210] (II) Loading sub module "vgahw"
[ 437.210] (II) LoadModule: "vgahw"
[ 437.210] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 437.210] (II) Module vgahw: vendor="X.Org Foundation"
[ 437.210] compiled for 1.11.1.902, module version = 0.1.0
[ 437.210] ABI class: X.Org Video Driver, version 11.0
[ 437.210] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 437.210] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 437.210] (==) fglrx(0): Default visual is TrueColor
[ 437.210] (**) fglrx(0): Option "DPMS" "true"
[ 437.210] (==) fglrx(0): RGB weight 888
[ 437.210] (II) fglrx(0): Using 8 bits per RGB
[ 437.210] (==) fglrx(0): Buffer Tiling is ON
[ 437.210] (II) Loading sub module "fglrxdrm"
[ 437.210] (II) LoadModule: "fglrxdrm"
[ 437.210] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 437.210] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 437.211] compiled for 1.4.99.906, module version = 8.91.4
[ 437.213] ukiDynamicMajor: found major device number 250
[ 437.213] ukiDynamicMajor: found major device number 250
[ 437.213] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 437.213] ukiOpenDevice: node name is /dev/ati/card0
[ 437.213] ukiOpenDevice: open result is 12, (OK)
[ 437.213] ukiOpenByBusid: ukiOpenMinor returns 12
[ 437.213] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 437.213] (==) fglrx(0): NoAccel = NO
[ 437.213] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 437.213] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2600" (Chipset = 0x9581)
[ 437.213] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30c5)
[ 437.213] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 437.213] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 437.213] (--) fglrx(0): MMIO registers at 0xe4400000
[ 437.213] (--) fglrx(0): I/O port at 0x00004000
[ 437.213] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 437.213] (II) fglrx(0): AC Adapter is used
[ 437.217] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 437.301] (II) Loading sub module "vbe"
[ 437.301] (II) LoadModule: "vbe"
[ 437.301] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 437.301] (II) Module vbe: vendor="X.Org Foundation"
[ 437.301] compiled for 1.11.1.902, module version = 1.1.0
[ 437.301] ABI class: X.Org Video Driver, version 11.0
[ 437.301] (II) fglrx(0): VESA BIOS detected
[ 437.301] (II) fglrx(0): VESA VBE Version 3.0
[ 437.301] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 437.301] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 437.301] (II) fglrx(0): VESA VBE OEM Software Rev: 10.56
[ 437.301] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 437.302] (II) fglrx(0): VESA VBE OEM Product: M76M
[ 437.302] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 437.336] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 437.336] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
[ 437.337] (II) fglrx(0): PCIE card detected
[ 437.337] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 437.337] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 437.342] (II) fglrx(0): Using adapter: 1:0.0.
[ 437.370] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 437.496] (II) fglrx(0): Interrupt handler installed at IRQ 32.
[ 437.496] (II) fglrx(0): RandR 1.2 support is enabled!
[ 437.496] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 437.496] (==) fglrx(0): Center Mode is disabled
[ 437.496] (II) Loading sub module "fb"
[ 437.496] (II) LoadModule: "fb"
[ 437.497] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 437.497] (II) Module fb: vendor="X.Org Foundation"
[ 437.497] compiled for 1.11.1.902, module version = 1.0.0
[ 437.497] ABI class: X.Org ANSI C Emulation, version 0.4
[ 437.497] (II) Loading sub module "ddc"
[ 437.497] (II) LoadModule: "ddc"
[ 437.497] (II) Module "ddc" already built-in
[ 437.769] (II) fglrx(0): Finished Initialize PPLIB!
[ 437.773] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 437.773] (II) fglrx(0): Output DFP1 has no monitor section
[ 437.773] (II) fglrx(0): Output DFP2 has no monitor section
[ 437.773] (II) fglrx(0): Output CRT1 has no monitor section
[ 437.773] (II) fglrx(0): Output TV has no monitor section
[ 437.773] (II) fglrx(0): Output CV has no monitor section
[ 437.773] (II) Loading sub module "ddc"
[ 437.773] (II) LoadModule: "ddc"
[ 437.773] (II) Module "ddc" already built-in
[ 437.773] (II) fglrx(0): Connected Display0: LVDS
[ 437.773] (II) fglrx(0): Display0 EDID data ---------------------------
[ 437.773] (II) fglrx(0): Manufacturer: QDS Model: 3f Serial#: 0
[ 437.773] (II) fglrx(0): Year: 2005 Week: 0
[ 437.773] (II) fglrx(0): EDID Version: 1.3
[ 437.773] (II) fglrx(0): Digital Display Input
[ 437.773] (II) fglrx(0): Max Image Size [cm]: horiz.: 33 vert.: 20
[ 437.773] (II) fglrx(0): Gamma: 2.20
[ 437.773] (II) fglrx(0): No DPMS capabilities specified
[ 437.773] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 437.773] (II) fglrx(0): First detailed timing is preferred mode
[ 437.773] (II) fglrx(0): redX: 0.566 redY: 0.330 greenX: 0.308 greenY: 0.553
[ 437.773] (II) fglrx(0): blueX: 0.158 blueY: 0.143 whiteX: 0.312 whiteY: 0.328
[ 437.773] (II) fglrx(0): Manufacturer's mask: 0
[ 437.773] (II) fglrx(0): Supported detailed timing:
[ 437.773] (II) fglrx(0): clock: 119.0 MHz Image Size: 331 x 207 mm
[ 437.773] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 437.773] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 437.773] (II) fglrx(0): Unknown vendor-specific block f
[ 437.773] (II) fglrx(0): QUANTADISPLAY
[ 437.773] (II) fglrx(0): QD15AL013
[ 437.773] (II) fglrx(0): EDID (in hex):
[ 437.773] (II) fglrx(0): 00ffffffffffff0044933f0000000000
[ 437.773] (II) fglrx(0): 000f0103802114780a2ea091544e8d28
[ 437.773] (II) fglrx(0): 24505400000001010101010101010101
[ 437.773] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 437.773] (II) fglrx(0): 36004bcf100000180000000f0006320c
[ 437.773] (II) fglrx(0): 78011402141e8c021900000000fe0051
[ 437.773] (II) fglrx(0): 55414e5441444953504c4159000000fe
[ 437.773] (II) fglrx(0): 0051443135414c3031330a2020200081
[ 437.773] (II) fglrx(0): End of Display0 EDID data --------------------
[ 437.976] (II) fglrx(0): EDID for output LVDS
[ 437.976] (II) fglrx(0): Manufacturer: QDS Model: 3f Serial#: 0
[ 437.976] (II) fglrx(0): Year: 2005 Week: 0
[ 437.976] (II) fglrx(0): EDID Version: 1.3
[ 437.976] (II) fglrx(0): Digital Display Input
[ 437.976] (II) fglrx(0): Max Image Size [cm]: horiz.: 33 vert.: 20
[ 437.976] (II) fglrx(0): Gamma: 2.20
[ 437.976] (II) fglrx(0): No DPMS capabilities specified
[ 437.976] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 437.976] (II) fglrx(0): First detailed timing is preferred mode
[ 437.976] (II) fglrx(0): redX: 0.566 redY: 0.330 greenX: 0.308 greenY: 0.553
[ 437.976] (II) fglrx(0): blueX: 0.158 blueY: 0.143 whiteX: 0.312 whiteY: 0.328
[ 437.976] (II) fglrx(0): Manufacturer's mask: 0
[ 437.976] (II) fglrx(0): Supported detailed timing:
[ 437.976] (II) fglrx(0): clock: 119.0 MHz Image Size: 331 x 207 mm
[ 437.976] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 437.976] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 437.976] (II) fglrx(0): Unknown vendor-specific block f
[ 437.976] (II) fglrx(0): QUANTADISPLAY
[ 437.976] (II) fglrx(0): QD15AL013
[ 437.976] (II) fglrx(0): EDID (in hex):
[ 437.976] (II) fglrx(0): 00ffffffffffff0044933f0000000000
[ 437.976] (II) fglrx(0): 000f0103802114780a2ea091544e8d28
[ 437.976] (II) fglrx(0): 24505400000001010101010101010101
[ 437.976] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 437.976] (II) fglrx(0): 36004bcf100000180000000f0006320c
[ 437.976] (II) fglrx(0): 78011402141e8c021900000000fe0051
[ 437.976] (II) fglrx(0): 55414e5441444953504c4159000000fe
[ 437.976] (II) fglrx(0): 0051443135414c3031330a2020200081
[ 437.976] (II) fglrx(0): EDID vendor "QDS", prod id 63
[ 437.976] (II) fglrx(0): Printing DDC gathered Modelines:
[ 437.976] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync -vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Printing probed modes for output LVDS
[ 437.976] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "1400x1050"x60.0 119.00 1400 1728 1760 1840 1050 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "1280x1024"x60.0 119.00 1280 1728 1760 1840 1024 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "1440x900"x60.0 119.00 1440 1728 1760 1840 900 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "1280x960"x60.0 119.00 1280 1728 1760 1840 960 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "1280x800"x60.0 119.00 1280 1728 1760 1840 800 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "1152x864"x60.0 119.00 1152 1728 1760 1840 864 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "1280x768"x60.0 119.00 1280 1728 1760 1840 768 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "1280x720"x60.0 119.00 1280 1728 1760 1840 720 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "1024x768"x60.0 119.00 1024 1728 1760 1840 768 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "1024x600"x60.0 119.00 1024 1728 1760 1840 600 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "800x600"x60.0 119.00 800 1728 1760 1840 600 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "800x480"x60.0 119.00 800 1728 1760 1840 480 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "720x480"x60.0 119.00 720 1728 1760 1840 480 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): Modeline "640x480"x60.0 119.00 640 1728 1760 1840 480 1053 1059 1080 +hsync +vsync (64.7 kHz)
[ 437.976] (II) fglrx(0): EDID for output DFP1
[ 437.976] (II) fglrx(0): EDID for output DFP2
[ 437.976] (II) fglrx(0): EDID for output CRT1
[ 437.976] (II) fglrx(0): EDID for output TV
[ 437.976] (II) fglrx(0): EDID for output CV
[ 437.976] (II) fglrx(0): Output LVDS connected
[ 437.976] (II) fglrx(0): Output DFP1 disconnected
[ 437.976] (II) fglrx(0): Output DFP2 disconnected
[ 437.976] (II) fglrx(0): Output CRT1 disconnected
[ 437.976] (II) fglrx(0): Output TV disconnected
[ 437.976] (II) fglrx(0): Output CV disconnected
[ 437.976] (II) fglrx(0): Using exact sizes for initial modes
[ 437.976] (II) fglrx(0): Output LVDS using initial mode 1680x1050
[ 437.976] (II) fglrx(0): Display dimensions: (330, 200) mm
[ 437.976] (II) fglrx(0): DPI set to (129, 133)
[ 437.977] (II) fglrx(0): Adapter ATI Mobility Radeon HD 2600 has 2 configurable heads and 1 displays connected.
[ 437.977] (==) fglrx(0): PseudoColor visuals disabled
[ 437.977] (II) Loading sub module "ramdac"
[ 437.977] (II) LoadModule: "ramdac"
[ 437.977] (II) Module "ramdac" already built-in
[ 437.977] (==) fglrx(0): NoDRI = NO
[ 437.977] (==) fglrx(0): Capabilities: 0x00000000
[ 437.977] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 437.977] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 437.977] (**) fglrx(0): UseFastTLS=1
[ 437.977] (==) fglrx(0): BlockSignalsOnLock=1
[ 437.977] (--) Depth 24 pixmap format is 32 bpp
[ 437.977] (II) Loading extension ATIFGLRXDRI
[ 437.977] (II) fglrx(0): doing swlDriScreenInit
[ 437.977] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 437.977] ukiDynamicMajor: found major device number 250
[ 437.977] ukiDynamicMajor: found major device number 250
[ 437.977] ukiDynamicMajor: found major device number 250
[ 437.977] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 437.977] ukiOpenDevice: node name is /dev/ati/card0
[ 437.977] ukiOpenDevice: open result is 17, (OK)
[ 437.977] ukiOpenByBusid: ukiOpenMinor returns 17
[ 437.977] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 437.977] (II) fglrx(0): [uki] DRM interface version 1.0
[ 437.977] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 437.977] (II) fglrx(0): [uki] added 8192 byte SAREA at 0xc8a000
[ 437.977] (II) fglrx(0): [uki] mapped SAREA 0xc8a000 to 0x7fc593e68000
[ 437.977] (II) fglrx(0): [uki] framebuffer handle = 0xc8b000
[ 437.977] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 437.977] (II) fglrx(0): swlDriScreenInit done
[ 437.977] (II) fglrx(0): Kernel Module Version Information:
[ 437.977] (II) fglrx(0): Name: fglrx
[ 437.977] (II) fglrx(0): Version: 8.91.4
[ 437.977] (II) fglrx(0): Date: Oct 25 2011
[ 437.977] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 437.977] (II) fglrx(0): Kernel Module version matches driver.
[ 437.977] (II) fglrx(0): Kernel Module Build Time Information:
[ 437.978] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.34-1-amd64
[ 437.978] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 437.978] (II) fglrx(0): Build-Kernel __SMP__: no
[ 437.978] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 437.978] (II) fglrx(0): [uki] register handle = 0x00c8c000
[ 437.996] (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints
[ 437.996] (II) fglrx(0): DRI initialization successfull
[ 437.996] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x010a0000
[ 437.996] (==) fglrx(0): Backing store disabled
[ 437.996] (II) Loading extension FGLRXEXTENSION
[ 437.996] (**) fglrx(0): DPMS enabled
[ 437.997] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 437.997] (**) fglrx(0): Textured Video is enabled.
[ 437.997] (II) LoadModule: "glesx"
[ 437.997] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 437.998] (II) Module glesx: vendor="X.Org Foundation"
[ 437.998] compiled for 1.4.99.906, module version = 1.0.0
[ 437.998] (II) Loading extension GLESX
[ 437.998] (II) fglrx(0): GLESX enableFlags = 528
[ 437.998] (II) fglrx(0): GLESX is enabled
[ 437.998] (II) LoadModule: "amdxmm"
[ 437.998] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 437.998] (II) Module amdxmm: vendor="X.Org Foundation"
[ 437.998] compiled for 1.4.99.906, module version = 2.0.0
[ 437.998] (II) Loading extension AMDXVOPL
[ 437.998] (II) Loading extension AMDXVBA
[ 437.998] [- XMM_GLX] [I ]glesxXvInit Configureable RGBOutputColorRange
[ 437.999] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 438.002] (II) fglrx(0): Enable composite support successfully
[ 438.002] (WW) fglrx(0): Option "VideoOverlay" is not used
[ 438.003] (WW) fglrx(0): Option "UseInternalAGPGART" is not used
[ 438.003] (WW) fglrx(0): Option "VendorName" is not used
[ 438.003] (WW) fglrx(0): Option "ModelName" is not used
[ 438.003] (II) fglrx(0): X context handle = 0x1
[ 438.003] (II) fglrx(0): [DRI] installation complete
[ 438.003] (==) fglrx(0): Silken mouse enabled
[ 438.003] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 438.003] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 438.003] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 438.003] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 438.004] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[ 438.004] (II) fglrx(0): Cannot set TV horizontal size.
[ 438.004] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
[ 438.005] (II) fglrx(0): Cannot set TV horizontal position.
[ 438.005] (II) fglrx(0): Cannot set TV vertical position.
[ 438.037] (--) RandR disabled
[ 438.037] (II) Initializing built-in extension Generic Event Extension
[ 438.037] (II) Initializing built-in extension SHAPE
[ 438.037] (II) Initializing built-in extension MIT-SHM
[ 438.037] (II) Initializing built-in extension XInputExtension
[ 438.037] (II) Initializing built-in extension XTEST
[ 438.037] (II) Initializing built-in extension BIG-REQUESTS
[ 438.037] (II) Initializing built-in extension SYNC
[ 438.037] (II) Initializing built-in extension XKEYBOARD
[ 438.037] (II) Initializing built-in extension XC-MISC
[ 438.037] (II) Initializing built-in extension SECURITY
[ 438.037] (II) Initializing built-in extension XINERAMA
[ 438.037] (II) Initializing built-in extension XFIXES
[ 438.037] (II) Initializing built-in extension RENDER
[ 438.037] (II) Initializing built-in extension RANDR
[ 438.037] (II) Initializing built-in extension COMPOSITE
[ 438.037] (II) Initializing built-in extension DAMAGE
[ 438.037] (II) SELinux: Disabled on system
[ 438.040] ukiDynamicMajor: found major device number 250
[ 438.040] ukiDynamicMajor: found major device number 250
[ 438.040] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 438.040] ukiOpenDevice: node name is /dev/ati/card0
[ 438.040] ukiOpenDevice: open result is 18, (OK)
[ 438.040] ukiOpenByBusid: ukiOpenMinor returns 18
[ 438.040] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 438.161] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 438.177] (II) fglrx(0): Enable the clock gating!
[ 438.177] (II) fglrx(0): Setting screen physical size to 444 x 277
[ 438.215] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 438.215] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 438.215] (II) LoadModule: "evdev"
[ 438.215] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 438.215] (II) Module evdev: vendor="X.Org Foundation"
[ 438.215] compiled for 1.11.0, module version = 2.6.0
[ 438.215] Module class: X.Org XInput Driver
[ 438.215] ABI class: X.Org XInput driver, version 13.0
[ 438.215] (II) Using input driver 'evdev' for 'Power Button'
[ 438.215] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 438.215] (**) Power Button: always reports core events
[ 438.215] (**) Power Button: Device: "/dev/input/event3"
[ 438.228] (--) Power Button: Found keys
[ 438.228] (II) Power Button: Configuring as keyboard
[ 438.228] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 438.228] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 438.228] (**) Option "xkb_rules" "evdev"
[ 438.228] (**) Option "xkb_model" "pc105"
[ 438.228] (**) Option "xkb_layout" "us"
[ 438.229] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 438.229] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 438.229] (II) Using input driver 'evdev' for 'Video Bus'
[ 438.229] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 438.229] (**) Video Bus: always reports core events
[ 438.229] (**) Video Bus: Device: "/dev/input/event5"
[ 438.244] (--) Video Bus: Found keys
[ 438.244] (II) Video Bus: Configuring as keyboard
[ 438.244] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5/event5"
[ 438.244] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 438.244] (**) Option "xkb_rules" "evdev"
[ 438.244] (**) Option "xkb_model" "pc105"
[ 438.244] (**) Option "xkb_layout" "us"
[ 438.245] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 438.245] (II) No input driver/identifier specified (ignoring)
[ 438.246] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 438.246] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 438.246] (II) Using input driver 'evdev' for 'Sleep Button'
[ 438.246] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 438.246] (**) Sleep Button: always reports core events
[ 438.246] (**) Sleep Button: Device: "/dev/input/event1"
[ 438.260] (--) Sleep Button: Found keys
[ 438.260] (II) Sleep Button: Configuring as keyboard
[ 438.260] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 438.260] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 438.260] (**) Option "xkb_rules" "evdev"
[ 438.260] (**) Option "xkb_model" "pc105"
[ 438.260] (**) Option "xkb_layout" "us"
[ 438.261] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 438.261] (II) No input driver/identifier specified (ignoring)
[ 438.262] (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/event8)
[ 438.262] (**) Logitech USB RECEIVER: Applying InputClass "evdev pointer catchall"
[ 438.262] (II) Using input driver 'evdev' for 'Logitech USB RECEIVER'
[ 438.262] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 438.262] (**) Logitech USB RECEIVER: always reports core events
[ 438.262] (**) Logitech USB RECEIVER: Device: "/dev/input/event8"
[ 438.276] (--) Logitech USB RECEIVER: Found 20 mouse buttons
[ 438.276] (--) Logitech USB RECEIVER: Found scroll wheel(s)
[ 438.276] (--) Logitech USB RECEIVER: Found relative axes
[ 438.276] (--) Logitech USB RECEIVER: Found x and y relative axes
[ 438.276] (II) Logitech USB RECEIVER: Configuring as mouse
[ 438.276] (II) Logitech USB RECEIVER: Adding scrollwheel support
[ 438.276] (**) Logitech USB RECEIVER: YAxisMapping: buttons 4 and 5
[ 438.276] (**) Logitech USB RECEIVER: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 438.276] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.1/2-5.1:1.0/input/input8/event8"
[ 438.276] (II) XINPUT: Adding extended input device "Logitech USB RECEIVER" (type: MOUSE, id 9)
[ 438.276] (II) Logitech USB RECEIVER: initialized for relative axes.
[ 438.276] (**) Logitech USB RECEIVER: (accel) keeping acceleration scheme 1
[ 438.276] (**) Logitech USB RECEIVER: (accel) acceleration profile 0
[ 438.276] (**) Logitech USB RECEIVER: (accel) acceleration factor: 2.000
[ 438.277] (**) Logitech USB RECEIVER: (accel) acceleration threshold: 4
[ 438.277] (II) config/udev: Adding input device Logitech USB RECEIVER (/dev/input/mouse1)
[ 438.277] (II) No input driver/identifier specified (ignoring)
[ 438.278] (II) config/udev: Adding input device DELL DELL USB Keyboard (/dev/input/event9)
[ 438.278] (**) DELL DELL USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 438.278] (II) Using input driver 'evdev' for 'DELL DELL USB Keyboard'
[ 438.278] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 438.278] (**) DELL DELL USB Keyboard: always reports core events
[ 438.278] (**) DELL DELL USB Keyboard: Device: "/dev/input/event9"
[ 438.296] (--) DELL DELL USB Keyboard: Found keys
[ 438.296] (II) DELL DELL USB Keyboard: Configuring as keyboard
[ 438.296] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.3/2-5.3:1.0/input/input9/event9"
[ 438.296] (II) XINPUT: Adding extended input device "DELL DELL USB Keyboard" (type: KEYBOARD, id 10)
[ 438.296] (**) Option "xkb_rules" "evdev"
[ 438.296] (**) Option "xkb_model" "pc105"
[ 438.296] (**) Option "xkb_layout" "us"
[ 438.297] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 438.297] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 438.297] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 438.297] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 438.297] (**) AT Translated Set 2 keyboard: always reports core events
[ 438.297] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 438.312] (--) AT Translated Set 2 keyboard: Found keys
[ 438.312] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 438.312] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 438.312] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 438.312] (**) Option "xkb_rules" "evdev"
[ 438.312] (**) Option "xkb_model" "pc105"
[ 438.312] (**) Option "xkb_layout" "us"
[ 438.313] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 438.313] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 438.313] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 438.313] (II) LoadModule: "synaptics"
[ 438.313] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 438.314] (II) Module synaptics: vendor="X.Org Foundation"
[ 438.314] compiled for 1.11.0, module version = 1.4.1
[ 438.314] Module class: X.Org XInput Driver
[ 438.314] ABI class: X.Org XInput driver, version 13.0
[ 438.314] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 438.314] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 438.314] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 438.314] (**) Option "Device" "/dev/input/event7"
[ 438.360] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 438.360] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 438.360] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 438.360] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 438.360] (--) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
[ 438.360] (--) SynPS/2 Synaptics TouchPad: invalid finger width range. defaulting to 0 - 16
[ 438.392] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 438.392] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 438.409] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[ 438.409] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 438.409] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 438.409] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 438.409] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 438.409] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 438.409] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 438.409] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 438.409] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 438.505] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 438.505] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 438.505] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 438.505] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 438.505] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 438.505] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 438.505] (**) Option "Device" "/dev/input/mouse0"
[ 438.537] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range. defaulting to 1615 - 5685
[ 438.537] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range. defaulting to 1729 - 4171
[ 438.537] (--) SynPS/2 Synaptics TouchPad: invalid pressure range. defaulting to 0 - 256
[ 438.537] (--) SynPS/2 Synaptics TouchPad: invalid finger width range. defaulting to 0 - 16
[ 438.557] (EE) Query no Synaptics: 6003C8
[ 438.557] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 438.557] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 438.609] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[ 438.609] (II) UnloadModule: "synaptics"
[ 438.609] (II) Unloading synaptics
[ 438.609] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event12)
[ 438.609] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 438.609] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 438.610] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 438.610] (**) PS/2 Generic Mouse: always reports core events
[ 438.610] (**) PS/2 Generic Mouse: Device: "/dev/input/event12"
[ 438.641] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 438.641] (--) PS/2 Generic Mouse: Found relative axes
[ 438.641] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 438.641] (II) PS/2 Generic Mouse: Configuring as mouse
[ 438.641] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 438.641] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 438.641] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/serio5/input/input12/event12"
[ 438.641] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 13)
[ 438.641] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 438.641] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 438.641] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 438.641] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 438.641] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 438.642] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse2)
[ 438.642] (II) No input driver/identifier specified (ignoring)
[ 438.643] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event10)
[ 438.643] (II) No input driver/identifier specified (ignoring)
[ 438.643] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 438.643] (II) No input driver/identifier specified (ignoring)
[ 438.644] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 438.644] (II) No input driver/identifier specified (ignoring)
[ 438.645] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event13)
[ 438.645] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 438.645] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 438.645] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 438.645] (**) ACPI Virtual Keyboard Device: always reports core events
[ 438.645] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event13"
[ 438.661] (--) ACPI Virtual Keyboard Device: Found keys
[ 438.661] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 438.661] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13"
[ 438.661] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 14)
[ 438.661] (**) Option "xkb_rules" "evdev"
[ 438.661] (**) Option "xkb_model" "pc105"
[ 438.661] (**) Option "xkb_layout" "us"
[ 438.662] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event4)
[ 438.662] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 438.662] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 438.662] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 438.662] (**) HP WMI hotkeys: always reports core events
[ 438.662] (**) HP WMI hotkeys: Device: "/dev/input/event4"
[ 438.677] (--) HP WMI hotkeys: Found keys
[ 438.677] (II) HP WMI hotkeys: Configuring as keyboard
[ 438.677] (**) Option "config_info" "udev:/sys/devices/virtual/input/input4/event4"
[ 438.677] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 15)
[ 438.677] (**) Option "xkb_rules" "evdev"
[ 438.677] (**) Option "xkb_model" "pc105"
[ 438.677] (**) Option "xkb_layout" "us"
[ 438.705] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 446.148] (II) fglrx(0): EDID vendor "QDS", prod id 63
[ 446.148] (II) fglrx(0): Printing DDC gathered Modelines:
[ 446.148] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync -vsync (64.7 kHz)
[ 454.852] (II) fglrx(0): EDID vendor "QDS", prod id 63
[ 454.852] (II) fglrx(0): Printing DDC gathered Modelines:
[ 454.852] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync -vsync (64.7 kHz)
[ 585.688]
Backtrace:
[ 585.688] 0: /usr/bin/X (xorg_backtrace+0x26) [0x7fc5940098f6]
[ 585.688] 1: /usr/bin/X (0x7fc593e85000+0x188559) [0x7fc59400d559]
[ 585.689] 2: /lib/x86_64-linux-gnu/libpthread.so.0 (0x7fc5931ad000+0xf020) [0x7fc5931bc020]
[ 585.689] 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xs111LookupPrivate+0x22) [0x7fc58fab0c72]
[ 585.689] 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xclLookupPrivate+0xd) [0x7fc58f48375d]
[ 585.689] 5: /usr/lib/xorg/modules/amdxmm.so (X740XvPutImage+0x12e) [0x7fc58c7f28de]
[ 585.689] 6: /usr/bin/X (0x7fc593e85000+0xa693e) [0x7fc593f2b93e]
[ 585.689] 7: /usr/lib/xorg/modules/extensions/libextmod.so (0x7fc590fb1000+0x12e02) [0x7fc590fc3e02]
[ 585.689] 8: /usr/bin/X (0x7fc593e85000+0x51f59) [0x7fc593ed6f59]
[ 585.689] 9: /usr/bin/X (0x7fc593e85000+0x411ba) [0x7fc593ec61ba]
[ 585.689] 10: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xfd) [0x7fc591ed8ead]
[ 585.689] 11: /usr/bin/X (0x7fc593e85000+0x414ad) [0x7fc593ec64ad]
[ 585.689] Segmentation fault at address 0x20
[ 585.689]
Fatal server error:
[ 585.689] Caught signal 11 (Segmentation fault). Server aborting
[ 585.689]
[ 585.689]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 585.689] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 585.689]
[ 585.708] (II) Power Button: Close
[ 585.708] (II) UnloadModule: "evdev"
[ 585.708] (II) Unloading evdev
[ 585.724] (II) Video Bus: Close
[ 585.724] (II) UnloadModule: "evdev"
[ 585.724] (II) Unloading evdev
[ 585.740] (II) Sleep Button: Close
[ 585.740] (II) UnloadModule: "evdev"
[ 585.740] (II) Unloading evdev
[ 585.764] (II) Logitech USB RECEIVER: Close
[ 585.765] (II) UnloadModule: "evdev"
[ 585.765] (II) Unloading evdev
[ 585.780] (II) DELL DELL USB Keyboard: Close
[ 585.780] (II) UnloadModule: "evdev"
[ 585.780] (II) Unloading evdev
[ 585.796] (II) AT Translated Set 2 keyboard: Close
[ 585.796] (II) UnloadModule: "evdev"
[ 585.796] (II) Unloading evdev
[ 585.837] (II) UnloadModule: "synaptics"
[ 585.837] (II) Unloading synaptics
[ 585.860] (II) PS/2 Generic Mouse: Close
[ 585.860] (II) UnloadModule: "evdev"
[ 585.860] (II) Unloading evdev
[ 585.876] (II) ACPI Virtual Keyboard Device: Close
[ 585.876] (II) UnloadModule: "evdev"
[ 585.876] (II) Unloading evdev
[ 585.892] (II) HP WMI hotkeys: Close
[ 585.892] (II) UnloadModule: "evdev"
[ 585.892] (II) Unloading evdev
[ 585.892] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 585.893] (II) fglrx(0): Backup framebuffer data.
[ 585.912] (II) fglrx(0): Backup complete.
[ 586.003] Server terminated with error (1). Closing log file.
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
E: PRODUCT=19/0/1/0
E: NAME="Power Button"
E: PHYS="LNXPWRBN/button/input0"
E: EV==3
E: KEY==10000000000000 0
E: MODALIAS=input:b0019v0000p0001e0000-e0,1,k74,ramlsfw
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
N: input/event3
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXPWRBN:00
E: ID_PATH_TAG=acpi-LNXPWRBN_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DMI_VENDOR=Hewlett-Packard
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
E: PRODUCT=19/0/6/0
E: NAME="Video Bus"
E: PHYS="LNXVIDEO/video/input0"
E: EV==3
E: KEY==3e000b00000000 0 0 0
E: MODALIAS=input:b0019v0000p0006e0000-e0,1,kE0,E1,E3,F1,F2,F3,F4,F5,ramlsfw
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5/event5
N: input/event5
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-LNXVIDEO:00
E: ID_PATH_TAG=acpi-LNXVIDEO_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DMI_VENDOR=Hewlett-Packard
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
E: PRODUCT=19/0/5/0
E: NAME="Lid Switch"
E: PHYS="PNP0C0D/button/input0"
E: EV==21
E: SW==1
E: MODALIAS=input:b0019v0000p0005e0000-e0,5,kramlsfw0,
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2
N: input/event2
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=acpi-PNP0C0D:00
E: ID_PATH_TAG=acpi-PNP0C0D_00
E: DMI_VENDOR=Hewlett-Packard
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
E: PRODUCT=19/0/3/0
E: NAME="Sleep Button"
E: PHYS="PNP0C0E/button/input0"
E: EV==3
E: KEY==4000 0 0
E: MODALIAS=input:b0019v0000p0003e0000-e0,1,k8E,ramlsfw
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1
N: input/event1
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=acpi-PNP0C0E:00
E: ID_PATH_TAG=acpi-PNP0C0E_00
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DMI_VENDOR=Hewlett-Packard
P: /devices/pci0000:00/0000:00:1b.0/input/input11
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input11
E: PRODUCT=1/11d4/1981/1
E: NAME="HDA Digital PCBeep"
E: PHYS="card0/codec#0/beep0"
E: EV==40001
E: SND==6
E: MODALIAS=input:b0001v11D4p1981e0001-e0,12,kramls1,2,fw
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
P: /devices/pci0000:00/0000:00:1b.0/input/input11/event11
N: input/event11
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input11/event11
E: MAJOR=13
E: MINOR=75
E: DEVNAME=/dev/input/event11
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ID_PATH_TAG=pci-0000_00_1b_0
E: DMI_VENDOR=Hewlett-Packard
P: /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.1/2-5.1:1.0/input/input8
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.1/2-5.1:1.0/input/input8
E: PRODUCT=3/46d/c50e/111
E: NAME="Logitech USB RECEIVER"
E: PHYS="usb-0000:00:1d.7-5.1/input0"
E: UNIQ=""
E: EV==20017
E: KEY==ffff0000 0 0 0 0
E: REL==143
E: MSC==10
E: LED==ff00
E: MODALIAS=input:b0003v046DpC50Ee0111-e0,1,2,4,11,k110,111,112,113,114,115,116,117,118,119,11A,11B,11C,11D,11E,11F,r0,1,6,8,am4,l8,9,A,B,C,D,E,sfw
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB_RECEIVER
E: ID_MODEL_ENC=USB\x20RECEIVER
E: ID_MODEL_ID=c50e
E: ID_REVISION=2510
E: ID_SERIAL=Logitech_USB_RECEIVER
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.7-usb-0:5.1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_5_1_1_0
P: /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.1/2-5.1:1.0/input/input8/event8
N: input/event8
S: input/by-id/usb-Logitech_USB_RECEIVER-event-mouse
S: input/by-path/pci-0000:00:1d.7-usb-0:5.1:1.0-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.1/2-5.1:1.0/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB_RECEIVER
E: ID_MODEL_ENC=USB\x20RECEIVER
E: ID_MODEL_ID=c50e
E: ID_REVISION=2510
E: ID_SERIAL=Logitech_USB_RECEIVER
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.7-usb-0:5.1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_5_1_1_0
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_RECEIVER-event-mouse /dev/input/by-path/pci-0000:00:1d.7-usb-0:5.1:1.0-event-mouse
P: /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.1/2-5.1:1.0/input/input8/mouse1
N: input/mouse1
S: input/by-id/usb-Logitech_USB_RECEIVER-mouse
S: input/by-path/pci-0000:00:1d.7-usb-0:5.1:1.0-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.1/2-5.1:1.0/input/input8/mouse1
E: MAJOR=13
E: MINOR=33
E: DEVNAME=/dev/input/mouse1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB_RECEIVER
E: ID_MODEL_ENC=USB\x20RECEIVER
E: ID_MODEL_ID=c50e
E: ID_REVISION=2510
E: ID_SERIAL=Logitech_USB_RECEIVER
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.7-usb-0:5.1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_5_1_1_0
E: DEVLINKS=/dev/input/by-id/usb-Logitech_USB_RECEIVER-mouse /dev/input/by-path/pci-0000:00:1d.7-usb-0:5.1:1.0-mouse
P: /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.3/2-5.3:1.0/input/input9
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.3/2-5.3:1.0/input/input9
E: PRODUCT=3/413c/2005/110
E: NAME="DELL DELL USB Keyboard"
E: PHYS="usb-0000:00:1d.7-5.3/input0"
E: UNIQ=""
E: EV==120013
E: KEY==1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
E: MSC==10
E: LED==7
E: MODALIAS=input:b0003v413Cp2005e0110-e0,1,4,11,14,k71,72,73,74,75,77,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8C,8E,96,98,9E,9F,A1,A3,A4,A5,A6,AD,B0,B1,B2,B3,B4,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,F0,ram4,l0,1,2,sfw
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=DELL
E: ID_VENDOR_ENC=DELL
E: ID_VENDOR_ID=413c
E: ID_MODEL=DELL_USB_Keyboard
E: ID_MODEL_ENC=DELL\x20USB\x20Keyboard
E: ID_MODEL_ID=2005
E: ID_REVISION=0105
E: ID_SERIAL=DELL_DELL_USB_Keyboard
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.7-usb-0:5.3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_5_3_1_0
P: /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.3/2-5.3:1.0/input/input9/event9
N: input/event9
S: input/by-id/usb-DELL_DELL_USB_Keyboard-event-kbd
S: input/by-path/pci-0000:00:1d.7-usb-0:5.3:1.0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.3/2-5.3:1.0/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=DELL
E: ID_VENDOR_ENC=DELL
E: ID_VENDOR_ID=413c
E: ID_MODEL=DELL_USB_Keyboard
E: ID_MODEL_ENC=DELL\x20USB\x20Keyboard
E: ID_MODEL_ID=2005
E: ID_REVISION=0105
E: ID_SERIAL=DELL_DELL_USB_Keyboard
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.7-usb-0:5.3:1.0
E: ID_PATH_TAG=pci-0000_00_1d_7-usb-0_5_3_1_0
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DEVLINKS=/dev/input/by-id/usb-DELL_DELL_USB_Keyboard-event-kbd /dev/input/by-path/pci-0000:00:1d.7-usb-0:5.3:1.0-event-kbd
P: /devices/platform/i8042/serio0/input/input0
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: PRODUCT=11/1/1/ab41
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: EV==120013
E: KEY==20000 20000000020 0 0 500f02100002 3803078f900d401 feffffdfffefffff fffffffffffffffe
E: MSC==10
E: LED==7
E: MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8A,8C,8E,8F,98,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,C1,D4,D9,E0,E1,E2,E3,EC,EE,185,1A9,1D1,ram4,l0,1,2,sfw
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DMI_VENDOR=Hewlett-Packard
P: /devices/platform/i8042/serio4/input/input7
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/input/input7
E: PRODUCT=11/2/7/25b1
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio4/input0"
E: EV==b
E: KEY==6420 670000 0 0 0 0
E: ABS==11000003
E: MODALIAS=input:b0011v0002p0007e25B1-e0,1,3,k110,111,112,115,116,145,14A,14D,14E,ra0,1,18,1C,mlsfw
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
P: /devices/platform/i8042/serio4/input/input7/event7
N: input/event7
S: input/by-path/platform-i8042-serio-4-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-event-mouse
P: /devices/platform/i8042/serio4/input/input7/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-4-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/input/input7/mouse0
E: MAJOR=13
E: MINOR=32
E: DEVNAME=/dev/input/mouse0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-mouse
P: /devices/platform/i8042/serio4/serio5/input/input12
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/serio5/input/input12
E: PRODUCT=11/2/1/0
E: NAME="PS/2 Generic Mouse"
E: PHYS="synaptics-pt/serio0/input0"
E: EV==7
E: KEY==70000 0 0 0 0
E: REL==3
E: MODALIAS=input:b0011v0002p0001e0000-e0,1,2,k110,111,112,r0,1,amlsfw
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-5
E: ID_PATH_TAG=platform-i8042-serio-5
P: /devices/platform/i8042/serio4/serio5/input/input12/event12
N: input/event12
S: input/by-path/platform-i8042-serio-5-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/serio5/input/input12/event12
E: MAJOR=13
E: MINOR=76
E: DEVNAME=/dev/input/event12
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-5
E: ID_PATH_TAG=platform-i8042-serio-5
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-5-event-mouse
P: /devices/platform/i8042/serio4/serio5/input/input12/mouse2
N: input/mouse2
S: input/by-path/platform-i8042-serio-5-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/serio5/input/input12/mouse2
E: MAJOR=13
E: MINOR=34
E: DEVNAME=/dev/input/mouse2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-5
E: ID_PATH_TAG=platform-i8042-serio-5
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-5-mouse
P: /devices/platform/lis3lv02d/input/input10
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/lis3lv02d/input/input10
E: PRODUCT=19/0/0/0
E: NAME="ST LIS3LV02DL Accelerometer"
E: PHYS="lis3lv02d/input0"
E: EV==9
E: ABS==7
E: MODALIAS=input:b0019v0000p0000e0000-e0,3,kra0,1,2,mlsfw
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_ACCELEROMETER=1
E: ID_PATH=platform-lis3lv02d
E: ID_PATH_TAG=platform-lis3lv02d
P: /devices/platform/lis3lv02d/input/input10/event10
N: input/event10
S: input/by-path/platform-lis3lv02d-event
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/lis3lv02d/input/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_ACCELEROMETER=1
E: ID_PATH=platform-lis3lv02d
E: ID_PATH_TAG=platform-lis3lv02d
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/input/by-path/platform-lis3lv02d-event
P: /devices/platform/lis3lv02d/input/input10/js0
N: input/js0
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/lis3lv02d/input/input10/js0
E: MAJOR=13
E: MINOR=0
E: DEVNAME=/dev/input/js0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_ACCELEROMETER=1
E: ID_PATH=platform-lis3lv02d
E: ID_PATH_TAG=platform-lis3lv02d
P: /devices/platform/pcspkr/input/input6
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input6
E: PRODUCT=10/1f/1/100
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: EV==40001
E: SND==6
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
P: /devices/platform/pcspkr/input/input6/event6
N: input/event6
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/virtual/input/input13
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input13
E: PRODUCT=3/0/0/4
E: NAME="ACPI Virtual Keyboard Device"
E: EV==3
E: KEY==ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
E: MODALIAS=input:b0003v0000p0000e0004-e0,1,k71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,91,92,93,94,95,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C0,C1,C2,C3,C4,C5,C6,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,E9,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F6,F7,F8,F9,FA,FB,FC,FD,FE,FF,ramlsfw
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
P: /devices/virtual/input/input13/event13
N: input/event13
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input13/event13
E: MAJOR=13
E: MINOR=77
E: DEVNAME=/dev/input/event13
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DMI_VENDOR=Hewlett-Packard
P: /devices/virtual/input/input4
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input4
E: PRODUCT=19/0/0/0
E: NAME="HP WMI hotkeys"
E: PHYS="wmi/input0"
E: EV==23
E: KEY==4000000000 0 700000000 2100400 0 0
E: SW==22
E: MODALIAS=input:b0019v0000p0000e0000-e0,1,5,k8A,94,99,E0,E1,E2,166,ramlsfw1,5,
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
P: /devices/virtual/input/input4/event4
N: input/event4
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DMI_VENDOR=Hewlett-Packard
DRM Information from dmesg:
---------------------------
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.640960] Linux agpgart interface v0.103
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (550, 'stable'), (500, 'unstable'), (15, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.34-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg depends on:
ii fglrx-driver [xorg-driver-video] 1:11-11-3
ii libc6 2.13-21
ii x11-xkb-utils 7.6+4
ii xkb-data 2.1-2
ii xserver-xorg-core 2:1.11.1.902-1
ii xserver-xorg-input-evdev [xorg-driver-input] 1:2.6.0-2+b2
ii xserver-xorg-input-kbd [xorg-driver-input] 1:1.6.0-3+b1
ii xserver-xorg-input-mouse [xorg-driver-input] 1:1.7.1-1+b1
ii xserver-xorg-input-synaptics [xorg-driver-input] 1.4.1-1+b1
ii xserver-xorg-video-radeon [xorg-driver-video] 1:6.14.3-1
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 7.11-6
xserver-xorg suggests no packages.
-- no debconf information
--- End Message ---