[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#629510: xserver-xorg-video-intel: freezes reproducibly on 965



Package: xserver-xorg-video-intel
Version: 2:2.15.0-3
Severity: normal

*** Please type your report below this line ***

Running a specific scenario (loading/rendering a "Robot Model" in rviz -
http://www.ros.org/wiki/rviz ) leads reproducibly to a full X freeze.

Bugreport was created logging in via ssh (while frozen).

Please see detailed backtraces below (Xorg.log + dmesg).

Running 'intel_gpu_dump' hangs after printing:

  ACTHD: 0xffffffff
  EIR: 0x00000000
  EMR: 0xffffffcd
  ESR: 0x00000001
  PGTBL_ER: 0x00000000
  IPEHR: 0x01000000
  IPEIR: 0x00000000
  INSTDONE: 0xffe5fafe
  INSTDONE1: 0x000fffff
    busy: Projection and LOD
    busy: Bypass FIFO
    busy: Color calculator

oddly i915_error_state (both in /sys/kernel/debug/dri/0 and
/sys/kernel/debug/dri/64) say "no error state collected".

If there is any more information on the error I can provide, please let
me know!


-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Sep 25  2009 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1972704 Apr 28 14:26 /usr/bin/Xorg

VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c)

Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 1077 Apr 27  2010 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
-------------------------------
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
EndSection

/etc/X11/xorg.conf.d does not exist.

KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
  options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
  options radeon modeset=1

Kernel version (/proc/version):
-------------------------------
Linux version 2.6.38-2-amd64 (Debian 2.6.38-5) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 13:51:57 UTC 2011

Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 50896 Oct 29  2010 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 34442 Jun  7 08:32 /var/log/Xorg.0.log
-rw-r--r-- 1 root root 36803 Jun  7 08:33 /var/log/Xorg.2.log

Output of dmesg:
---------------

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-2-amd64 (Debian 2.6.38-5) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 13:51:57 UTC 2011
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=e5e93e3e-d250-4ce7-a4e3-ffb52c9e8a9b ro
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000df66d800 (usable)
[    0.000000]  BIOS-e820: 00000000df66d800 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Dell Inc. Inspiron 1420                   /0DT492, BIOS A09 07/11/2008
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 100000000 mask F00000000 write-back
[    0.000000]   4 base 0DF800000 mask FFF800000 uncachable
[    0.000000]   5 base 0DF700000 mask FFFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000df700000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdf66d max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000df66d000
[    0.000000]  0000000000 - 00df600000 page 2M
[    0.000000]  00df600000 - 00df66d000 page 4k
[    0.000000] kernel direct mapping tables up to df66d000 @ 1fffa000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[    0.000000]  0100000000 - 0120000000 page 2M
[    0.000000] kernel direct mapping tables up to 120000000 @ df667000-df66d000
[    0.000000] RAMDISK: 36d84000 - 376ba000
[    0.000000] ACPI: RSDP 00000000000fbbf0 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000df66f200 0005C (v01 DELL    M08     27D8070B ASL  00000061)
[    0.000000] ACPI: FACP 00000000df66f09c 000F4 (v04 DELL    M08     27D8070B ASL  00000061)
[    0.000000] ACPI: DSDT 00000000df66f800 05676 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.000000] ACPI: FACS 00000000df67e000 00040
[    0.000000] ACPI: HPET 00000000df66f300 00038 (v01 DELL    M08     00000001 ASL  00000061)
[    0.000000] ACPI: APIC 00000000df66f400 00068 (v01 DELL    M08     27D8070B ASL  00000047)
[    0.000000] ACPI: MCFG 00000000df66f3c0 0003E (v16 DELL    M08     27D8070B ASL  00000061)
[    0.000000] ACPI: SLIC 00000000df66f49c 00176 (v01 DELL    M08     27D8070B ASL  00000061)
[    0.000000] ACPI: BOOT 00000000df66efc0 00028 (v01 DELL    M08     27D8070B ASL  00000061)
[    0.000000] ACPI: SSDT 00000000df66d97a 004CC (v01  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000120000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[    0.000000]   NODE_DATA [000000011fffb000 - 000000011fffffff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00120000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000df66d
[    0.000000]     0: 0x00100000 -> 0x00120000
[    0.000000] On node 0 totalpages: 1046012
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 896677 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 129280 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000df66d000 - 00000000df66e000
[    0.000000] PM: Registered nosave memory: 00000000df66e000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000
[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000
[    0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000
[    0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
[    0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800df400000 s82752 r8192 d23744 u1048576
[    0.000000] pcpu-alloc: s82752 r8192 d23744 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029878
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=e5e93e3e-d250-4ce7-a4e3-ffb52c9e8a9b ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4040376k/4718592k available (3260k kernel code, 534544k absent, 143672k reserved, 3425k data, 676k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: PIT calibration matches HPET. 1 loops
[    0.000000] Detected 2393.290 MHz processor.
[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4786.58 BogoMIPS (lpj=9573160)
[    0.008117] pid_max: default: 32768 minimum: 301
[    0.008196] Security Framework initialized
[    0.008254] SELinux:  Disabled at boot.
[    0.008616] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012320] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.013528] Mount-cache hash table entries: 256
[    0.013740] Initializing cgroup subsys ns
[    0.013798] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.013869] Initializing cgroup subsys cpuacct
[    0.013926] Initializing cgroup subsys devices
[    0.013983] Initializing cgroup subsys freezer
[    0.014039] Initializing cgroup subsys net_cls
[    0.014094] Initializing cgroup subsys blkio
[    0.014189] CPU: Physical Processor ID: 0
[    0.014244] CPU: Processor Core ID: 0
[    0.014298] mce: CPU supports 6 MCE banks
[    0.014359] CPU0: Thermal monitoring enabled (TM2)
[    0.014417] using mwait in idle threads.
[    0.015459] ACPI: Core revision 20110112
[    0.019451] Setting APIC routing to flat
[    0.019883] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059639] CPU0: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
[    0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.060003] ... version:                2
[    0.060003] ... bit width:              40
[    0.060003] ... generic registers:      2
[    0.060003] ... value mask:             000000ffffffffff
[    0.060003] ... max period:             000000007fffffff
[    0.060003] ... fixed-purpose events:   3
[    0.060003] ... event mask:             0000000700000003
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1 Ok.
[    0.152034] NMI watchdog enabled, takes one hw-pmu counter.
[    0.152132] Brought up 2 CPUs
[    0.152189] Total of 2 processors activated (9573.17 BogoMIPS).
[    0.153309] devtmpfs: initialized
[    0.156419] print_constraints: dummy: 
[    0.156419] NET: Registered protocol family 16
[    0.156419] ACPI: bus type pci registered
[    0.156523] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.156597] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.161992] PCI: Using configuration type 1 for base access
[    0.162056] dmi type 0xB1 record - unknown flag
[    0.162448] bio: create slab <bio-0> at 0
[    0.162448] ACPI: EC: Look up EC in DSDT
[    0.174456] ACPI: SSDT 00000000df66e4b0 002C8 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.174803] ACPI: Dynamic OEM Table Load:
[    0.174943] ACPI: SSDT           (null) 002C8 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.175216] ACPI: SSDT 00000000df66de46 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.175547] ACPI: Dynamic OEM Table Load:
[    0.175688] ACPI: SSDT           (null) 005E5 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.176053] ACPI: SSDT 00000000df66e778 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.176392] ACPI: Dynamic OEM Table Load:
[    0.176533] ACPI: SSDT           (null) 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.176774] ACPI: SSDT 00000000df66e42b 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.177107] ACPI: Dynamic OEM Table Load:
[    0.177247] ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.177551] ACPI: Interpreter enabled
[    0.177608] ACPI: (supports S0 S3 S4 S5)
[    0.177844] ACPI: Using IOAPIC for interrupt routing
[    0.232138] ACPI: No dock devices found.
[    0.232196] HEST: Table not found.
[    0.232254] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.240592] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.257023] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.257085] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.257145] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.259019] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.259090] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[    0.259161] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff]
[    0.259231] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff]
[    0.259302] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff]
[    0.259373] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff]
[    0.259444] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff]
[    0.259515] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff]
[    0.259585] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff]
[    0.259655] pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff]
[    0.259737] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[    0.259778] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
[    0.259789] pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit]
[    0.259797] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.259803] pci 0000:00:02.0: reg 20: [io  0xeff8-0xefff]
[    0.259831] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
[    0.259841] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfebfffff 64bit]
[    0.260045] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[    0.260099] pci 0000:00:1a.0: reg 20: [io  0x6f20-0x6f3f]
[    0.260138] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[    0.260192] pci 0000:00:1a.1: reg 20: [io  0x6f00-0x6f1f]
[    0.260244] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[    0.260267] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
[    0.260354] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.260359] pci 0000:00:1a.7: PME# disabled
[    0.260387] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[    0.260409] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[    0.260488] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.260492] pci 0000:00:1b.0: PME# disabled
[    0.260520] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[    0.260603] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.260608] pci 0000:00:1c.0: PME# disabled
[    0.260638] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[    0.260721] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.260726] pci 0000:00:1c.1: PME# disabled
[    0.260759] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[    0.260842] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.260846] pci 0000:00:1c.3: PME# disabled
[    0.260878] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
[    0.260962] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.260966] pci 0000:00:1c.5: PME# disabled
[    0.260995] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[    0.261049] pci 0000:00:1d.0: reg 20: [io  0x6f80-0x6f9f]
[    0.261088] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[    0.261142] pci 0000:00:1d.1: reg 20: [io  0x6f60-0x6f7f]
[    0.261180] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[    0.261234] pci 0000:00:1d.2: reg 20: [io  0x6f40-0x6f5f]
[    0.261286] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[    0.261309] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
[    0.261396] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.261401] pci 0000:00:1d.7: PME# disabled
[    0.261424] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.261507] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[    0.261617] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.261693] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.261756] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.261831] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.261944] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[    0.261959] pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
[    0.261971] pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
[    0.261982] pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
[    0.261993] pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
[    0.262005] pci 0000:00:1f.1: reg 20: [io  0x6fa0-0x6faf]
[    0.262055] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[    0.262080] pci 0000:00:1f.2: reg 10: [io  0x6eb0-0x6eb7]
[    0.262092] pci 0000:00:1f.2: reg 14: [io  0x6eb8-0x6ebb]
[    0.262103] pci 0000:00:1f.2: reg 18: [io  0x6ec0-0x6ec7]
[    0.262114] pci 0000:00:1f.2: reg 1c: [io  0x6ec8-0x6ecb]
[    0.262126] pci 0000:00:1f.2: reg 20: [io  0x6ee0-0x6eff]
[    0.262137] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb800-0xfe9fbfff]
[    0.262183] pci 0000:00:1f.2: PME# supported from D3hot
[    0.262188] pci 0000:00:1f.2: PME# disabled
[    0.262209] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[    0.262224] pci 0000:00:1f.3: reg 10: [mem 0xfe9fb700-0xfe9fb7ff]
[    0.262265] pci 0000:00:1f.3: reg 20: [io  0x10c0-0x10df]
[    0.262359] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[    0.262421] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.262426] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.262434] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.262521] pci 0000:0c:00.0: [14e4:4328] type 0 class 0x000280
[    0.262551] pci 0000:0c:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[    0.262576] pci 0000:0c:00.0: reg 18: [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.262674] pci 0000:0c:00.0: supports D1 D2
[    0.262675] pci 0000:0c:00.0: PME# supported from D3hot D3cold
[    0.262681] pci 0000:0c:00.0: PME# disabled
[    0.268033] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[    0.268095] pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
[    0.268100] pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.268107] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.268168] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.268228] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.268233] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.268241] pci 0000:00:1c.3:   bridge window [mem 0xf0100000-0xf03fffff 64bit pref]
[    0.268373] pci 0000:09:00.0: [14e4:1713] type 0 class 0x000200
[    0.268442] pci 0000:09:00.0: reg 10: [mem 0xfe5f0000-0xfe5fffff 64bit]
[    0.268751] pci 0000:09:00.0: PME# supported from D3hot D3cold
[    0.268762] pci 0000:09:00.0: PME# disabled
[    0.268900] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[    0.268961] pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
[    0.268966] pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.268974] pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.269020] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00
[    0.269035] pci 0000:03:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.269107] pci 0000:03:01.0: MMC cards are now supported by standard SDHCI controller
[    0.269192] pci 0000:03:01.0: reg 10: [mem 0xfe4ff800-0xfe4fffff]
[    0.269275] pci 0000:03:01.0: supports D1 D2
[    0.269277] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269282] pci 0000:03:01.0: PME# disabled
[    0.269303] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805
[    0.269325] pci 0000:03:01.1: reg 10: [mem 0xfe4ff400-0xfe4ff4ff]
[    0.269409] pci 0000:03:01.1: supports D1 D2
[    0.269411] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269415] pci 0000:03:01.1: PME# disabled
[    0.269435] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880
[    0.269457] pci 0000:03:01.2: reg 10: [mem 0xfe4ff600-0xfe4ff6ff]
[    0.269543] pci 0000:03:01.2: supports D1 D2
[    0.269544] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269549] pci 0000:03:01.2: PME# disabled
[    0.269572] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880
[    0.269593] pci 0000:03:01.3: reg 10: [mem 0xfe4ff700-0xfe4ff7ff]
[    0.269677] pci 0000:03:01.3: supports D1 D2
[    0.269679] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269683] pci 0000:03:01.3: PME# disabled
[    0.269751] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.269815] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.269820] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.269828] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.269832] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.269834] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.269837] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.269839] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.269842] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[    0.269844] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode)
[    0.269846] pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode)
[    0.269849] pci 0000:00:1e.0:   bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode)
[    0.269851] pci 0000:00:1e.0:   bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode)
[    0.269854] pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode)
[    0.269856] pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode)
[    0.269858] pci 0000:00:1e.0:   bridge window [mem 0xffb00000-0xffefffff] (subtractive decode)
[    0.269861] pci 0000:00:1e.0:   bridge window [mem 0x120000000-0x317ffffff] (subtractive decode)
[    0.269894] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.270115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[    0.270202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.270244] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.270290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.270333] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.270376]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.279004] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[    0.279330] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[    0.279653] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[    0.280035] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[    0.280443] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.281112] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.281781] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.282439] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.283222] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.283304] vgaarb: loaded
[    0.283392] PCI: Using ACPI for IRQ routing
[    0.283450] PCI: pci_cache_line_size set to 64 bytes
[    0.283563] reserve RAM buffer: 000000000009f000 - 000000000009ffff 
[    0.283566] reserve RAM buffer: 00000000df66d800 - 00000000dfffffff 
[    0.283664] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.283730] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.283955] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.288032] Switching to clocksource hpet
[    0.289283] pnp: PnP ACPI init
[    0.289353] ACPI: bus type pnp registered
[    0.291875] Switched to NOHz mode on CPU #0
[    0.291928] Switched to NOHz mode on CPU #1
[    0.297800] pnp 00:00: [bus 00-ff]
[    0.297802] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.297804] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.297806] pnp 00:00: [io  0x0d00-0xffff window]
[    0.297808] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.297810] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.297812] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[    0.297814] pnp 00:00: [mem 0xfc000000-0xfebfffff window]
[    0.297816] pnp 00:00: [mem 0xfec10000-0xfecfffff window]
[    0.297817] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window]
[    0.297819] pnp 00:00: [mem 0xfed90000-0xfed9ffff window]
[    0.297821] pnp 00:00: [mem 0xfeda7000-0xfedfffff window]
[    0.297823] pnp 00:00: [mem 0xfee10000-0xff9fffff window]
[    0.297825] pnp 00:00: [mem 0xffb00000-0xffefffff window]
[    0.297827] pnp 00:00: [mem 0x120000000-0x317ffffff window]
[    0.297881] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.297903] pnp 00:01: [irq 12]
[    0.297929] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.297943] pnp 00:02: [io  0x0060]
[    0.297945] pnp 00:02: [io  0x0064]
[    0.297946] pnp 00:02: [io  0x0062]
[    0.297948] pnp 00:02: [io  0x0066]
[    0.297953] pnp 00:02: [irq 1]
[    0.297975] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.297989] pnp 00:03: [io  0x0070-0x0071]
[    0.297994] pnp 00:03: [irq 8]
[    0.297995] pnp 00:03: [io  0x0072-0x0077]
[    0.298021] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.298038] pnp 00:04: [io  0x0061]
[    0.298040] pnp 00:04: [io  0x0063]
[    0.298042] pnp 00:04: [io  0x0065]
[    0.298043] pnp 00:04: [io  0x0067]
[    0.298067] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.298079] pnp 00:05: [io  0x0c80-0x0cff]
[    0.298127] system 00:05: [io  0x0c80-0x0cff] could not be reserved
[    0.298188] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.298205] pnp 00:06: [dma 4]
[    0.298207] pnp 00:06: [io  0x0000-0x000f]
[    0.298209] pnp 00:06: [io  0x0080-0x0085]
[    0.298210] pnp 00:06: [io  0x0087-0x008f]
[    0.298212] pnp 00:06: [io  0x00c0-0x00df]
[    0.298213] pnp 00:06: [io  0x0010-0x001f]
[    0.298215] pnp 00:06: [io  0x0090-0x0091]
[    0.298216] pnp 00:06: [io  0x0093-0x009f]
[    0.298241] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.298253] pnp 00:07: [io  0x00f0-0x00ff]
[    0.298259] pnp 00:07: [irq 13]
[    0.298286] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.298319] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[    0.298364] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.298426] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.298533] pnp 00:09: [io  0x0900-0x097f]
[    0.298534] pnp 00:09: [io  0x0092]
[    0.298536] pnp 00:09: [io  0x00b2-0x00b3]
[    0.298538] pnp 00:09: [io  0x0020-0x0021]
[    0.298539] pnp 00:09: [io  0x00a0-0x00a1]
[    0.298541] pnp 00:09: [irq 0 disabled]
[    0.298542] pnp 00:09: [io  0x04d0-0x04d1]
[    0.298544] pnp 00:09: [io  0x1000-0x1005]
[    0.298546] pnp 00:09: [io  0x1008-0x100f]
[    0.298560] pnp 00:09: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.298636] pnp 00:09: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.298762] system 00:09: [io  0x0900-0x097f] has been reserved
[    0.298823] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.298883] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.298898] pnp 00:0a: [io  0xf400-0xf4fe]
[    0.298900] pnp 00:0a: [io  0x0086]
[    0.298901] pnp 00:0a: [io  0x1006-0x1007]
[    0.298903] pnp 00:0a: [io  0x100a-0x1059]
[    0.298904] pnp 00:0a: [io  0x1060-0x107f]
[    0.298906] pnp 00:0a: [io  0x1080-0x10bf]
[    0.298907] pnp 00:0a: [io  0x10c0-0x10df]
[    0.298909] pnp 00:0a: [io  0x1010-0x102f]
[    0.298910] pnp 00:0a: [io  0x0809]
[    0.298925] pnp 00:0a: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.298999] pnp 00:0a: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.299074] pnp 00:0a: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.299149] pnp 00:0a: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
[    0.299270] system 00:0a: [io  0xf400-0xf4fe] has been reserved
[    0.299330] system 00:0a: [io  0x1080-0x10bf] has been reserved
[    0.299391] system 00:0a: [io  0x10c0-0x10df] has been reserved
[    0.299451] system 00:0a: [io  0x0809] has been reserved
[    0.299510] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.309349] pnp 00:0b: [mem 0x00000000-0x0009efff]
[    0.309351] pnp 00:0b: [mem 0x0009f000-0x0009ffff]
[    0.309353] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[    0.309355] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[    0.309357] pnp 00:0b: [mem 0x00100000-0xdf66d7ff]
[    0.309358] pnp 00:0b: [mem 0xdf66d800-0xdf6fffff]
[    0.309360] pnp 00:0b: [mem 0xdf700000-0xdf7fffff]
[    0.309362] pnp 00:0b: [mem 0xdf700000-0xdfefffff]
[    0.309364] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[    0.309368] pnp 00:0b: [mem 0xffa00000-0xffafffff]
[    0.309370] pnp 00:0b: [mem 0xfec00000-0xfec0ffff]
[    0.309371] pnp 00:0b: [mem 0xfee00000-0xfee0ffff]
[    0.309373] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
[    0.309375] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff]
[    0.309376] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff]
[    0.309378] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff]
[    0.309380] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff]
[    0.309382] pnp 00:0b: [mem 0xfed18000-0xfed1bfff]
[    0.309383] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[    0.309461] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved
[    0.309523] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved
[    0.309584] system 00:0b: [mem 0x000c0000-0x000cffff] has been reserved
[    0.309645] system 00:0b: [mem 0x000e0000-0x000fffff] has been reserved
[    0.309706] system 00:0b: [mem 0x00100000-0xdf66d7ff] could not be reserved
[    0.309768] system 00:0b: [mem 0xdf66d800-0xdf6fffff] has been reserved
[    0.309829] system 00:0b: [mem 0xdf700000-0xdf7fffff] has been reserved
[    0.309890] system 00:0b: [mem 0xdf700000-0xdfefffff] could not be reserved
[    0.309952] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[    0.310012] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved
[    0.310073] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.310135] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.310196] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.310257] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved
[    0.310318] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved
[    0.310379] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved
[    0.310440] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved
[    0.310501] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved
[    0.310563] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.310624] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.310672] pnp: PnP ACPI: found 12 devices
[    0.310730] ACPI: ACPI bus type pnp unregistered
[    0.317161] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0400000-0xf05fffff]
[    0.317225] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.317298] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref]
[    0.317371] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.317431] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.317492] pci 0000:00:1c.5: BAR 13: assigned [io  0x4000-0x4fff]
[    0.317553] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[    0.317613] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.317676] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf05fffff]
[    0.317740] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.317817] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[    0.317877] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.317941] pci 0000:00:1c.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.318004] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.318081] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.318141] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.318205] pci 0000:00:1c.3:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.318269] pci 0000:00:1c.3:   bridge window [mem 0xf0100000-0xf03fffff 64bit pref]
[    0.318345] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[    0.318405] pci 0000:00:1c.5:   bridge window [io  0x4000-0x4fff]
[    0.318469] pci 0000:00:1c.5:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.318533] pci 0000:00:1c.5:   bridge window [mem 0xf0800000-0xf09fffff 64bit pref]
[    0.318610] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.318668] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.318732] pci 0000:00:1e.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.318795] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.318873] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.318937] pci 0000:00:1c.0: setting latency timer to 64
[    0.318947] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.319011] pci 0000:00:1c.1: setting latency timer to 64
[    0.319021] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.319084] pci 0000:00:1c.3: setting latency timer to 64
[    0.319091] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.319155] pci 0000:00:1c.5: setting latency timer to 64
[    0.319162] pci 0000:00:1e.0: setting latency timer to 64
[    0.319166] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.319168] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.319170] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.319172] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.319174] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
[    0.319176] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff]
[    0.319178] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
[    0.319181] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
[    0.319183] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
[    0.319185] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff]
[    0.319187] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff]
[    0.319189] pci_bus 0000:00: resource 15 [mem 0xffb00000-0xffefffff]
[    0.319191] pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff]
[    0.319193] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.319195] pci_bus 0000:0b: resource 1 [mem 0xf0400000-0xf05fffff]
[    0.319197] pci_bus 0000:0b: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.319199] pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
[    0.319201] pci_bus 0000:0c: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.319203] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.319206] pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
[    0.319208] pci_bus 0000:0d: resource 1 [mem 0xfe600000-0xfe7fffff]
[    0.319210] pci_bus 0000:0d: resource 2 [mem 0xf0100000-0xf03fffff 64bit pref]
[    0.319212] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    0.319214] pci_bus 0000:09: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.319216] pci_bus 0000:09: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref]
[    0.319218] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.319220] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.319222] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.319224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.319226] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[    0.319228] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff]
[    0.319230] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff]
[    0.319232] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff]
[    0.319234] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff]
[    0.319236] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff]
[    0.319238] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff]
[    0.319240] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff]
[    0.319243] pci_bus 0000:03: resource 15 [mem 0xffb00000-0xffefffff]
[    0.319245] pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff]
[    0.319275] NET: Registered protocol family 2
[    0.319456] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.320665] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.324989] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.325595] TCP: Hash tables configured (established 524288 bind 65536)
[    0.325656] TCP reno registered
[    0.325720] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.325819] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.326033] NET: Registered protocol family 1
[    0.326114] pci 0000:00:02.0: Boot video device
[    0.326323] PCI: CLS 64 bytes, default 64
[    0.326378] Unpacking initramfs...
[    0.536883] Freeing initrd memory: 9432k freed
[    0.541593] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.541659] Placing 64MB software IO TLB between ffff8800db400000 - ffff8800df400000
[    0.541731] software IO TLB at phys 0xdb400000 - 0xdf400000
[    0.541859] Simple Boot Flag at 0x79 set to 0x1
[    0.542290] audit: initializing netlink socket (disabled)
[    0.542360] type=2000 audit(1307426905.536:1): initialized
[    0.550987] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.553274] VFS: Disk quotas dquot_6.5.2
[    0.553381] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.553522] msgmni has been set to 7909
[    0.553766] alg: No test for stdrng (krng)
[    0.553871] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.553944] io scheduler noop registered
[    0.554000] io scheduler deadline registered
[    0.554086] io scheduler cfq registered (default)
[    0.554229] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.554290] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.554374] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.554427] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.554505] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.554558] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.554640] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.554693] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.554872] ERST: Table is not found!
[    0.554986] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.600440] Linux agpgart interface v0.103
[    0.600568] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[    0.600697] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    0.601646] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.601828] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    0.602004] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.607104] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.607169] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.609167] mousedev: PS/2 mouse device common for all mice
[    0.609269] rtc_cmos 00:03: RTC can wake from S4
[    0.609401] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.609502] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.609571] cpuidle: using governor ladder
[    0.609628] cpuidle: using governor menu
[    0.609890] TCP cubic registered
[    0.610044] NET: Registered protocol family 10
[    0.610568] Mobile IPv6
[    0.610624] NET: Registered protocol family 17
[    0.610683] Registering the dns_resolver key type
[    0.610842] PM: Hibernation image not present or could not be loaded.
[    0.610856] registered taskstats version 1
[    0.611626] rtc_cmos 00:03: setting system clock to 2011-06-07 06:08:25 UTC (1307426905)
[    0.611734] Initalizing network drop monitor service
[    0.612486] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.613252] Freeing unused kernel memory: 676k freed
[    0.613484] Write protecting the kernel read-only data: 6144k
[    0.616498] Freeing unused kernel memory: 816k freed
[    0.619515] Freeing unused kernel memory: 776k freed
[    0.630427] <30>udev[52]: starting version 167
[    0.752624] thermal LNXTHERM:00: registered as thermal_zone0
[    0.752687] ACPI: Thermal Zone [THM] (45 C)
[    0.755493] SCSI subsystem initialized
[    0.766204] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.780616] libata version 3.00 loaded.
[    0.783653] sdhci: Secure Digital Host Controller Interface driver
[    0.783719] sdhci: Copyright(c) Pierre Ossman
[    0.787708] ata_piix 0000:00:1f.1: version 2.13
[    0.787723] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.787825] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.788396] scsi0 : ata_piix
[    0.788582] scsi1 : ata_piix
[    0.788945] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[    0.789007] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[    0.789410] ata2: port disabled. ignoring.
[    0.790022] usbcore: registered new interface driver usbfs
[    0.790206] usbcore: registered new interface driver hub
[    0.790818] usbcore: registered new device driver usb
[    0.793867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.793954] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.794031] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.794035] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.794112] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.796443] tg3.c:v3.116 (December 3, 2010)
[    0.796515] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.796587] tg3 0000:09:00.0: setting latency timer to 64
[    0.804061] ehci_hcd 0000:00:1a.7: debug port 1
[    0.808023] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.808042] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[    0.820020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.820105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.820190] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.820293] usb usb1: Product: EHCI Host Controller
[    0.820375] usb usb1: Manufacturer: Linux 2.6.38-2-amd64 ehci_hcd
[    0.820470] usb usb1: SerialNumber: 0000:00:1a.7
[    0.820720] hub 1-0:1.0: USB hub found
[    0.820804] hub 1-0:1.0: 4 ports detected
[    0.820972] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.821082] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.821085] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.821177] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.832136] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[    0.832251] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22)
[    0.832368] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    0.833464] mmc0: no vmmc regulator found
[    0.834542] Registered led device: mmc0::
[    0.835574] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[    0.836057] ehci_hcd 0000:00:1d.7: debug port 1
[    0.840034] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.840051] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[    0.855430] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:22:19:ce:23:81
[    0.855505] tg3 0000:09:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[    0.855578] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[    0.855650] tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    0.856021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.856114] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.856175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.856246] usb usb2: Product: EHCI Host Controller
[    0.856304] usb usb2: Manufacturer: Linux 2.6.38-2-amd64 ehci_hcd
[    0.856363] usb usb2: SerialNumber: 0000:00:1d.7
[    0.856506] hub 2-0:1.0: USB hub found
[    0.856567] hub 2-0:1.0: 6 ports detected
[    0.895957] uhci_hcd: USB Universal Host Controller Interface driver
[    0.896104] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.896176] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.896179] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.896243] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.912047] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[    0.912148] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.912211] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.912284] usb usb3: Product: UHCI Host Controller
[    0.912342] usb usb3: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[    0.912402] usb usb3: SerialNumber: 0000:00:1a.0
[    0.912558] hub 3-0:1.0: USB hub found
[    0.912618] hub 3-0:1.0: 2 ports detected
[    0.912764] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.912831] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.912834] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.912898] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.928067] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[    0.928163] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.928225] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.928295] usb usb4: Product: UHCI Host Controller
[    0.928353] usb usb4: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[    0.928412] usb usb4: SerialNumber: 0000:00:1a.1
[    0.928602] hub 4-0:1.0: USB hub found
[    0.928661] hub 4-0:1.0: 2 ports detected
[    0.928790] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.928856] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.928859] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.928922] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.940038] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[    0.940130] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.940192] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.940262] usb usb5: Product: UHCI Host Controller
[    0.940320] usb usb5: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[    0.940379] usb usb5: SerialNumber: 0000:00:1d.0
[    0.940569] hub 5-0:1.0: USB hub found
[    0.940628] hub 5-0:1.0: 2 ports detected
[    0.940751] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.940816] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.940819] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.940882] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.956075] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[    0.956168] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.956229] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.956300] usb usb6: Product: UHCI Host Controller
[    0.956358] usb usb6: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[    0.956417] usb usb6: SerialNumber: 0000:00:1d.1
[    0.956566] hub 6-0:1.0: USB hub found
[    0.956626] hub 6-0:1.0: 2 ports detected
[    0.956750] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.956815] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.956818] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.956881] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.957001] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[    0.957094] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.957155] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.957226] usb usb7: Product: UHCI Host Controller
[    0.957284] usb usb7: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[    0.957344] usb usb7: SerialNumber: 0000:00:1d.2
[    0.957483] hub 7-0:1.0: USB hub found
[    0.957543] hub 7-0:1.0: 2 ports detected
[    0.968391] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D400, max UDMA/33
[    1.003382] ata1.00: configured for UDMA/33
[    1.012062] scsi 0:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632H D400 PQ: 0 ANSI: 5
[    1.019799] ahci 0000:00:1f.2: version 3.0
[    1.019814] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.019942] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.020046] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[    1.020122] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
[    1.020200] ahci 0000:00:1f.2: setting latency timer to 64
[    1.028416] scsi2 : ahci
[    1.028578] scsi3 : ahci
[    1.028706] scsi4 : ahci
[    1.028905] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 44
[    1.028976] ata4: DUMMY
[    1.029032] ata5: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 44
[    1.034567] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.034639] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.034795] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.244022] usb 2-6: new high speed USB device using ehci_hcd and address 2
[    1.332087] firewire_core: created device fw0: GUID 4a4fc000084035e1, S400
[    1.348033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.348114] ata5: SATA link down (SStatus 0 SControl 300)
[    1.348773] ata3.00: ATA-8: ST9120817AS, 3.ADB, max UDMA/133
[    1.348833] ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32)
[    1.349303] ata3.00: configured for UDMA/133
[    1.349442] scsi 2:0:0:0: Direct-Access     ATA      ST9120817AS      3.AD PQ: 0 ANSI: 5
[    1.357610] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.357732] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[    1.359811] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.360057] sd 2:0:0:0: [sda] Write Protect is off
[    1.360118] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.360149] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.380960] usb 2-6: New USB device found, idVendor=05a9, idProduct=2640
[    1.381025] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.381087] usb 2-6: Product: Laptop Integrated Webcam
[    1.381147] usb 2-6: Manufacturer: OmniVision Technologies, Inc. -2640-08.05.12.1
[    1.446969]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    1.447374] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.540018] Refined TSC clocksource calibration: 2393.314 MHz.
[    1.540082] Switching to clocksource tsc
[    1.620013] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    1.797178] usb 3-2: New USB device found, idVendor=0a5c, idProduct=4500
[    1.797240] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.797301] usb 3-2: Product: BCM2045B2
[    1.797357] usb 3-2: Manufacturer: Broadcom
[    1.800211] hub 3-2:1.0: USB hub found
[    1.802179] hub 3-2:1.0: 3 ports detected
[    1.940287] EXT3-fs (sda1): recovery required on readonly filesystem
[    1.940351] EXT3-fs (sda1): write access will be enabled during recovery
[    1.948089] EXT3-fs: barriers not enabled
[    2.081188] usb 3-2.1: new full speed USB device using uhci_hcd and address 3
[    2.214194] usb 3-2.1: New USB device found, idVendor=413c, idProduct=8126
[    2.214259] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.214329] usb 3-2.1: Product: BCM2045
[    2.214386] usb 3-2.1: Manufacturer: Broadcom Corp
[    2.293200] usb 3-2.2: new full speed USB device using uhci_hcd and address 4
[    2.428200] usb 3-2.2: New USB device found, idVendor=0a5c, idProduct=4502
[    2.428265] usb 3-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[    2.428335] usb 3-2.2: Manufacturer: Broadcom Corp
[    2.448276] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input1
[    2.448407] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[    2.448497] usbcore: registered new interface driver usbhid
[    2.448556] usbhid: USB HID core driver
[    2.505201] usb 3-2.3: new full speed USB device using uhci_hcd and address 5
[    2.639203] usb 3-2.3: New USB device found, idVendor=0a5c, idProduct=4503
[    2.639265] usb 3-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[    2.639335] usb 3-2.3: Manufacturer: Broadcom Corp
[    2.647468] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input2
[    2.647610] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[    5.742509] kjournald starting.  Commit interval 5 seconds
[    5.742554] EXT3-fs (sda1): orphan cleanup on readonly fs
[    5.742561] ext3_orphan_cleanup: deleting unreferenced inode 336570
[    5.742589] ext3_orphan_cleanup: deleting unreferenced inode 5628449
[    5.742607] ext3_orphan_cleanup: deleting unreferenced inode 1164017
[    5.742628] ext3_orphan_cleanup: deleting unreferenced inode 1164016
[    5.742637] ext3_orphan_cleanup: deleting unreferenced inode 5628450
[    5.742646] ext3_orphan_cleanup: deleting unreferenced inode 5628447
[    5.742653] EXT3-fs (sda1): 6 orphan inodes deleted
[    5.742712] EXT3-fs (sda1): recovery complete
[    5.800321] EXT3-fs (sda1): mounted filesystem with ordered data mode
[    8.589328] <30>udev[326]: starting version 167
[    9.567940] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    9.701384] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    9.705981] ACPI: acpi_idle registered with cpuidle
[    9.706203] Monitor-Mwait will be used to enter C-1 state
[    9.706223] Monitor-Mwait will be used to enter C-2 state
[    9.706238] Monitor-Mwait will be used to enter C-3 state
[    9.706243] Marking TSC unstable due to TSC halts in idle
[    9.706455] Switching to clocksource hpet
[    9.724040] ACPI: Lid Switch [LID]
[    9.724188] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    9.752051] ACPI: Power Button [PBTN]
[    9.752196] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[    9.752318] ACPI: Sleep Button [SBTN]
[    9.789115] ACPI: Battery Slot [BAT0] (battery present)
[    9.851382] ACPI: AC Adapter [AC] (on-line)
[    9.905582] wmi: Mapper loaded
[    9.977428] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   10.225844] lib80211: common routines for IEEE802.11 drivers
[   10.225910] lib80211_crypt: registered algorithm 'NULL'
[   10.393573] Bluetooth: Core ver 2.15
[   10.393655] NET: Registered protocol family 31
[   10.393716] Bluetooth: HCI device and connection manager initialized
[   10.393776] Bluetooth: HCI socket layer initialized
[   10.847130] input: Dell WMI hotkeys as /devices/virtual/input/input7
[   10.963337] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
[   10.980542] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[   11.048208] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   11.048426] usbcore: registered new interface driver btusb
[   11.146805] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   11.465663] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[   11.465820] r852: driver loaded succesfully
[   11.487796] Linux video capture interface: v2.00
[   11.685798] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[   11.686310] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[   11.686962] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input10
[   11.687105] usbcore: registered new interface driver uvcvideo
[   11.687170] USB Video Class driver (v1.0.0)
[   11.722285] Disabling lock debugging due to kernel taint
[   11.722350] wl: module license 'MIXED/Proprietary' taints kernel.
[   11.732749] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   11.732819] wl 0000:0c:00.0: setting latency timer to 64
[   11.905552] lib80211_crypt: registered algorithm 'TKIP'
[   11.905706] eth1: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.100.82.38
[   12.324622] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   12.324768] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   12.324798] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.524396] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[   14.724371] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   14.724525] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   14.724667] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   16.135346] Adding 5205024k swap on /dev/sda5.  Priority:-1 extents:1 across:5205024k 
[   16.501382] EXT3-fs (sda1): using internal journal
[   16.675224] loop: module loaded
[   18.105086] fuse init (API version 7.16)
[   18.365462] EXT3-fs: barriers not enabled
[   18.381681] kjournald starting.  Commit interval 5 seconds
[   18.381910] EXT3-fs (sda6): using internal journal
[   18.381979] EXT3-fs (sda6): mounted filesystem with ordered data mode
[   31.791965] RPC: Registered udp transport module.
[   31.792061] RPC: Registered tcp transport module.
[   31.792132] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   31.897720] FS-Cache: Loaded
[   31.963386] FS-Cache: Netfs 'nfs' registered for caching
[   32.030790] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   36.475956] sshd (1349): /proc/1349/oom_adj is deprecated, please use /proc/1349/oom_score_adj instead.
[   43.579252] Bluetooth: L2CAP ver 2.15
[   43.579330] Bluetooth: L2CAP socket layer initialized
[   43.632798] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   43.632862] Bluetooth: BNEP filters: protocol multicast
[   43.646949] Bluetooth: RFCOMM TTY layer initialized
[   43.647013] Bluetooth: RFCOMM socket layer initialized
[   43.647081] Bluetooth: RFCOMM ver 1.11
[   43.679213] Bluetooth: SCO (Voice Link) ver 0.6
[   43.679275] Bluetooth: SCO socket layer initialized
[   45.109074] lp: driver loaded but no devices found
[   45.150805] ppdev: user-space parallel port driver
[   45.888543] tg3 0000:09:00.0: irq 46 for MSI/MSI-X
[   45.923812] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   50.687811] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[   55.936050] eth1: no IPv6 routers present
[  129.177551] [drm] Initialized drm 1.1.0 20060810
[  129.282079] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  129.282085] i915 0000:00:02.0: setting latency timer to 64
[  129.313541] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[  129.313548] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[  129.313551] [drm] Driver supports precise vblank timestamp query.
[  129.369106] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[  129.369426] [drm] initialized overlay support
[  129.718602] fbcon: inteldrmfb (fb0) is primary device
[  129.719053] Console: switching to colour frame buffer device 180x56
[  129.719068] fb0: inteldrmfb frame buffer device
[  129.719072] drm: registered panic notifier
[  129.734693] acpi device:35: registered as cooling_device2
[  129.735064] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input16
[  129.735154] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[  129.735169] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[  129.735523] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[  145.142693] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1680.548293] INFO: task kworker/u:3:199 blocked for more than 120 seconds.
[ 1680.548301] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1680.548308] kworker/u:3     D ffff880118773cc0     0   199      2 0x00000000
[ 1680.548319]  ffff880118773cc0 0000000000000046 0000000000000001 ffff88010a011440
[ 1680.548331]  0000000000013700 ffff880117c29fd8 ffff880117c29fd8 0000000000013700
[ 1680.548341]  ffff880118773cc0 ffff880117c28010 ffff88011b65ca40 0000000000000000
[ 1680.548352] Call Trace:
[ 1680.548369]  [<ffffffff813262f2>] ? __mutex_lock_common+0x127/0x193
[ 1680.548379]  [<ffffffff8132642a>] ? mutex_lock+0x1a/0x33
[ 1680.548405]  [<ffffffffa07a8a82>] ? intel_idle_update+0x45/0x24f [i915]
[ 1680.548413]  [<ffffffff81325adb>] ? schedule+0x55b/0x588
[ 1680.548434]  [<ffffffffa07a8a3d>] ? intel_idle_update+0x0/0x24f [i915]
[ 1680.548444]  [<ffffffff8105b17a>] ? process_one_work+0x1d1/0x2ee
[ 1680.548452]  [<ffffffff8105d0c0>] ? worker_thread+0x12d/0x247
[ 1680.548460]  [<ffffffff8105cf93>] ? worker_thread+0x0/0x247
[ 1680.548467]  [<ffffffff8105cf93>] ? worker_thread+0x0/0x247
[ 1680.548476]  [<ffffffff8105fef7>] ? kthread+0x7a/0x82
[ 1680.548485]  [<ffffffff8100a764>] ? kernel_thread_helper+0x4/0x10
[ 1680.548494]  [<ffffffff8105fe7d>] ? kthread+0x0/0x82
[ 1680.548501]  [<ffffffff8100a760>] ? kernel_thread_helper+0x0/0x10
[ 1680.548599] INFO: task rviz:3641 blocked for more than 120 seconds.
[ 1680.548604] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1680.548609] rviz            D ffff8800ba85f2c0     0  3641   3447 0x00000000
[ 1680.548619]  ffff8800ba85f2c0 0000000000000082 ffff8800ba85f2c0 ffff88010a011440
[ 1680.548630]  0000000000013700 ffff8800ba81dfd8 ffff8800ba81dfd8 0000000000013700
[ 1680.548640]  ffff8800ba85f2c0 ffff8800ba81c010 ffff8800ba81c000 ffff8800ba81c000
[ 1680.548651] Call Trace:
[ 1680.548659]  [<ffffffff813262f2>] ? __mutex_lock_common+0x127/0x193
[ 1680.548670]  [<ffffffff810cfdef>] ? vm_insert_pfn+0xff/0x13b
[ 1680.548678]  [<ffffffff8132642a>] ? mutex_lock+0x1a/0x33
[ 1680.548700]  [<ffffffffa079dcce>] ? i915_gem_fault+0x4a/0x1bc [i915]
[ 1680.548709]  [<ffffffff810d0cb1>] ? __do_fault+0x52/0x3ed
[ 1680.548718]  [<ffffffff810d1e62>] ? handle_pte_fault+0x322/0x8f2
[ 1680.548728]  [<ffffffff8132a147>] ? do_page_fault+0x32a/0x34c
[ 1680.548739]  [<ffffffff8104d3ad>] ? walk_system_ram_range+0x82/0x101
[ 1680.548747]  [<ffffffff8104d443>] ? page_is_ram+0x17/0x21
[ 1680.548755]  [<ffffffff8102fb9f>] ? pat_pagerange_is_ram+0x30/0x5e
[ 1680.548764]  [<ffffffff813274d5>] ? page_fault+0x25/0x30
[ 1680.548773]  [<ffffffff811a3a7f>] ? __copy_user_nocache+0x2f/0xb8
[ 1680.548795]  [<ffffffffa079d649>] ? i915_gem_pwrite_ioctl+0x237/0x872 [i915]
[ 1680.548817]  [<ffffffffa079b42a>] ? i915_gem_object_set_to_gtt_domain+0x8b/0x92 [i915]
[ 1680.548835]  [<ffffffffa0742fb4>] ? drm_gem_object_lookup+0x37/0x47 [drm]
[ 1680.548850]  [<ffffffffa07417c0>] ? drm_ioctl+0x24e/0x321 [drm]
[ 1680.548872]  [<ffffffffa079d412>] ? i915_gem_pwrite_ioctl+0x0/0x872 [i915]
[ 1680.548881]  [<ffffffff8132a131>] ? do_page_fault+0x314/0x34c
[ 1680.548891]  [<ffffffff81104b0b>] ? do_vfs_ioctl+0x467/0x4b4
[ 1680.548899]  [<ffffffff811084d2>] ? dput+0x29/0xe9
[ 1680.548908]  [<ffffffff810f8d08>] ? fput+0x1c5/0x1ec
[ 1680.548916]  [<ffffffff81104ba3>] ? sys_ioctl+0x4b/0x70
[ 1680.548924]  [<ffffffff81009952>] ? system_call_fastpath+0x16/0x1b
[ 1680.548932] INFO: task rviz:3691 blocked for more than 120 seconds.
[ 1680.548936] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1680.548942] rviz            D ffff8800c2abd7c0     0  3691   3447 0x00000000
[ 1680.548951]  ffff8800c2abd7c0 0000000000000082 00007f6b00000000 ffffffff8160b020
[ 1680.548962]  0000000000013700 ffff8800ba907fd8 ffff8800ba907fd8 0000000000013700
[ 1680.548973]  ffff8800c2abd7c0 ffff8800ba906010 0000000000000000 0000000128019b60
[ 1680.548983] Call Trace:
[ 1680.548992]  [<ffffffff81326da1>] ? rwsem_down_failed_common+0xda/0x10e
[ 1680.549001]  [<ffffffff811a4a43>] ? call_rwsem_down_write_failed+0x13/0x20
[ 1680.549009]  [<ffffffff813266d7>] ? down_write+0x25/0x27
[ 1680.549017]  [<ffffffff810d742b>] ? sys_mprotect+0xbf/0x1f8
[ 1680.549025]  [<ffffffff811063ff>] ? sys_poll+0x45/0xaf
[ 1680.549033]  [<ffffffff81009952>] ? system_call_fastpath+0x16/0x1b
[ 1800.548104] INFO: task kworker/u:3:199 blocked for more than 120 seconds.
[ 1800.548112] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1800.548118] kworker/u:3     D ffff880118773cc0     0   199      2 0x00000000
[ 1800.548130]  ffff880118773cc0 0000000000000046 0000000000000001 ffff88010a011440
[ 1800.548142]  0000000000013700 ffff880117c29fd8 ffff880117c29fd8 0000000000013700
[ 1800.548152]  ffff880118773cc0 ffff880117c28010 ffff88011b65ca40 0000000000000000
[ 1800.548163] Call Trace:
[ 1800.548179]  [<ffffffff813262f2>] ? __mutex_lock_common+0x127/0x193
[ 1800.548188]  [<ffffffff8132642a>] ? mutex_lock+0x1a/0x33
[ 1800.548215]  [<ffffffffa07a8a82>] ? intel_idle_update+0x45/0x24f [i915]
[ 1800.548223]  [<ffffffff81325adb>] ? schedule+0x55b/0x588
[ 1800.548244]  [<ffffffffa07a8a3d>] ? intel_idle_update+0x0/0x24f [i915]
[ 1800.548254]  [<ffffffff8105b17a>] ? process_one_work+0x1d1/0x2ee
[ 1800.548262]  [<ffffffff8105d0c0>] ? worker_thread+0x12d/0x247
[ 1800.548270]  [<ffffffff8105cf93>] ? worker_thread+0x0/0x247
[ 1800.548277]  [<ffffffff8105cf93>] ? worker_thread+0x0/0x247
[ 1800.548286]  [<ffffffff8105fef7>] ? kthread+0x7a/0x82
[ 1800.548295]  [<ffffffff8100a764>] ? kernel_thread_helper+0x4/0x10
[ 1800.548304]  [<ffffffff8105fe7d>] ? kthread+0x0/0x82
[ 1800.548311]  [<ffffffff8100a760>] ? kernel_thread_helper+0x0/0x10
[ 1800.548407] INFO: task rviz:3641 blocked for more than 120 seconds.
[ 1800.548412] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1800.548417] rviz            D ffff8800ba85f2c0     0  3641   3447 0x00000000
[ 1800.548427]  ffff8800ba85f2c0 0000000000000082 ffff8800ba85f2c0 ffff88010a011440
[ 1800.548438]  0000000000013700 ffff8800ba81dfd8 ffff8800ba81dfd8 0000000000013700
[ 1800.548448]  ffff8800ba85f2c0 ffff8800ba81c010 ffff8800ba81c000 ffff8800ba81c000
[ 1800.548459] Call Trace:
[ 1800.548467]  [<ffffffff813262f2>] ? __mutex_lock_common+0x127/0x193
[ 1800.548477]  [<ffffffff810cfdef>] ? vm_insert_pfn+0xff/0x13b
[ 1800.548485]  [<ffffffff8132642a>] ? mutex_lock+0x1a/0x33
[ 1800.548508]  [<ffffffffa079dcce>] ? i915_gem_fault+0x4a/0x1bc [i915]
[ 1800.548516]  [<ffffffff810d0cb1>] ? __do_fault+0x52/0x3ed
[ 1800.548525]  [<ffffffff810d1e62>] ? handle_pte_fault+0x322/0x8f2
[ 1800.548535]  [<ffffffff8132a147>] ? do_page_fault+0x32a/0x34c
[ 1800.548546]  [<ffffffff8104d3ad>] ? walk_system_ram_range+0x82/0x101
[ 1800.548554]  [<ffffffff8104d443>] ? page_is_ram+0x17/0x21
[ 1800.548562]  [<ffffffff8102fb9f>] ? pat_pagerange_is_ram+0x30/0x5e
[ 1800.548571]  [<ffffffff813274d5>] ? page_fault+0x25/0x30
[ 1800.548580]  [<ffffffff811a3a7f>] ? __copy_user_nocache+0x2f/0xb8
[ 1800.548602]  [<ffffffffa079d649>] ? i915_gem_pwrite_ioctl+0x237/0x872 [i915]
[ 1800.548625]  [<ffffffffa079b42a>] ? i915_gem_object_set_to_gtt_domain+0x8b/0x92 [i915]
[ 1800.548643]  [<ffffffffa0742fb4>] ? drm_gem_object_lookup+0x37/0x47 [drm]
[ 1800.548658]  [<ffffffffa07417c0>] ? drm_ioctl+0x24e/0x321 [drm]
[ 1800.548679]  [<ffffffffa079d412>] ? i915_gem_pwrite_ioctl+0x0/0x872 [i915]
[ 1800.548689]  [<ffffffff8132a131>] ? do_page_fault+0x314/0x34c
[ 1800.548700]  [<ffffffff81104b0b>] ? do_vfs_ioctl+0x467/0x4b4
[ 1800.548707]  [<ffffffff811084d2>] ? dput+0x29/0xe9
[ 1800.548716]  [<ffffffff810f8d08>] ? fput+0x1c5/0x1ec
[ 1800.548724]  [<ffffffff81104ba3>] ? sys_ioctl+0x4b/0x70
[ 1800.548732]  [<ffffffff81009952>] ? system_call_fastpath+0x16/0x1b
[ 1800.548740] INFO: task rviz:3691 blocked for more than 120 seconds.
[ 1800.548745] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1800.548750] rviz            D ffff8800c2abd7c0     0  3691   3447 0x00000000
[ 1800.548759]  ffff8800c2abd7c0 0000000000000082 00007f6b00000000 ffffffff8160b020
[ 1800.548770]  0000000000013700 ffff8800ba907fd8 ffff8800ba907fd8 0000000000013700
[ 1800.548780]  ffff8800c2abd7c0 ffff8800ba906010 0000000000000000 0000000128019b60
[ 1800.548791] Call Trace:
[ 1800.548800]  [<ffffffff81326da1>] ? rwsem_down_failed_common+0xda/0x10e
[ 1800.548809]  [<ffffffff811a4a43>] ? call_rwsem_down_write_failed+0x13/0x20
[ 1800.548817]  [<ffffffff813266d7>] ? down_write+0x25/0x27
[ 1800.548825]  [<ffffffff810d742b>] ? sys_mprotect+0xbf/0x1f8
[ 1800.548833]  [<ffffffff811063ff>] ? sys_poll+0x45/0xaf
[ 1800.548840]  [<ffffffff81009952>] ? system_call_fastpath+0x16/0x1b

Contents of most recent Xorg X server log file (/var/log/Xorg.2.log):
---------------------------------------------------------------------
[  1434.746] 
X.Org X Server 1.10.1
Release Date: 2011-04-15
[  1434.746] X Protocol Version 11, Revision 0
[  1434.746] Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
[  1434.746] Current Operating System: Linux dcon-debian 2.6.38-2-amd64 #1 SMP Sun May 8 13:51:57 UTC 2011 x86_64
[  1434.746] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=e5e93e3e-d250-4ce7-a4e3-ffb52c9e8a9b ro
[  1434.747] Build Date: 28 April 2011  12:13:00PM
[  1434.747] xorg-server 2:1.10.1-2 (Julien Cristau <jcristau@debian.org>) 
[  1434.747] Current version of pixman: 0.21.8
[  1434.747] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1434.747] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1434.747] (==) Log file: "/var/log/Xorg.2.log", Time: Tue Jun  7 08:32:19 2011
[  1434.747] (==) Using config file: "/etc/X11/xorg.conf"
[  1434.747] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1434.747] (==) No Layout section.  Using the first Screen section.
[  1434.747] (**) |-->Screen "Default Screen" (0)
[  1434.747] (**) |   |-->Monitor "Configured Monitor"
[  1434.748] (==) No device specified for screen "Default Screen".
	Using the first device section listed.
[  1434.748] (**) |   |-->Device "Configured Video Device"
[  1434.748] (==) Automatically adding devices
[  1434.748] (==) Automatically enabling devices
[  1434.748] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  1434.748] 	Entry deleted from font path.
[  1434.748] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
[  1434.748] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1434.748] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1434.748] (II) Loader magic: 0x7dba00
[  1434.748] (II) Module ABI versions:
[  1434.748] 	X.Org ANSI C Emulation: 0.4
[  1434.748] 	X.Org Video Driver: 10.0
[  1434.748] 	X.Org XInput driver : 12.2
[  1434.748] 	X.Org Server Extension : 5.0
[  1434.749] (--) PCI:*(0:0:2:0) 8086:2a02:1028:01f3 rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
[  1434.749] (--) PCI: (0:0:2:1) 8086:2a03:1028:01f3 rev 12, Mem @ 0xfeb00000/1048576
[  1434.749] (II) Open ACPI successful (/var/run/acpid.socket)
[  1434.749] (II) LoadModule: "extmod"
[  1434.749] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  1434.749] (II) Module extmod: vendor="X.Org Foundation"
[  1434.749] 	compiled for 1.10.1, module version = 1.0.0
[  1434.749] 	Module class: X.Org Server Extension
[  1434.749] 	ABI class: X.Org Server Extension, version 5.0
[  1434.749] (II) Loading extension SELinux
[  1434.749] (II) Loading extension MIT-SCREEN-SAVER
[  1434.749] (II) Loading extension XFree86-VidModeExtension
[  1434.749] (II) Loading extension XFree86-DGA
[  1434.749] (II) Loading extension DPMS
[  1434.749] (II) Loading extension XVideo
[  1434.749] (II) Loading extension XVideo-MotionCompensation
[  1434.749] (II) Loading extension X-Resource
[  1434.749] (II) LoadModule: "dbe"
[  1434.750] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  1434.750] (II) Module dbe: vendor="X.Org Foundation"
[  1434.750] 	compiled for 1.10.1, module version = 1.0.0
[  1434.750] 	Module class: X.Org Server Extension
[  1434.750] 	ABI class: X.Org Server Extension, version 5.0
[  1434.750] (II) Loading extension DOUBLE-BUFFER
[  1434.750] (II) LoadModule: "glx"
[  1434.750] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1434.750] (II) Module glx: vendor="X.Org Foundation"
[  1434.750] 	compiled for 1.10.1, module version = 1.0.0
[  1434.750] 	ABI class: X.Org Server Extension, version 5.0
[  1434.750] (==) AIGLX enabled
[  1434.750] (II) Loading extension GLX
[  1434.750] (II) LoadModule: "record"
[  1434.750] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  1434.750] (II) Module record: vendor="X.Org Foundation"
[  1434.750] 	compiled for 1.10.1, module version = 1.13.0
[  1434.750] 	Module class: X.Org Server Extension
[  1434.750] 	ABI class: X.Org Server Extension, version 5.0
[  1434.750] (II) Loading extension RECORD
[  1434.750] (II) LoadModule: "dri"
[  1434.750] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  1434.750] (II) Module dri: vendor="X.Org Foundation"
[  1434.750] 	compiled for 1.10.1, module version = 1.0.0
[  1434.750] 	ABI class: X.Org Server Extension, version 5.0
[  1434.750] (II) Loading extension XFree86-DRI
[  1434.750] (II) LoadModule: "dri2"
[  1434.750] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  1434.750] (II) Module dri2: vendor="X.Org Foundation"
[  1434.750] 	compiled for 1.10.1, module version = 1.2.0
[  1434.750] 	ABI class: X.Org Server Extension, version 5.0
[  1434.750] (II) Loading extension DRI2
[  1434.750] (==) Matched intel as autoconfigured driver 0
[  1434.750] (==) Matched vesa as autoconfigured driver 1
[  1434.750] (==) Matched fbdev as autoconfigured driver 2
[  1434.750] (==) Assigned the driver to the xf86ConfigLayout
[  1434.750] (II) LoadModule: "intel"
[  1434.750] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  1434.751] (II) Module intel: vendor="X.Org Foundation"
[  1434.751] 	compiled for 1.10.1, module version = 2.15.0
[  1434.751] 	Module class: X.Org Video Driver
[  1434.751] 	ABI class: X.Org Video Driver, version 10.0
[  1434.751] (II) LoadModule: "vesa"
[  1434.751] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  1434.751] (II) Module vesa: vendor="X.Org Foundation"
[  1434.751] 	compiled for 1.10.1, module version = 2.3.0
[  1434.751] 	Module class: X.Org Video Driver
[  1434.751] 	ABI class: X.Org Video Driver, version 10.0
[  1434.751] (II) LoadModule: "fbdev"
[  1434.751] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  1434.751] (II) Module fbdev: vendor="X.Org Foundation"
[  1434.751] 	compiled for 1.10.1, module version = 0.4.2
[  1434.751] 	ABI class: X.Org Video Driver, version 10.0
[  1434.751] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
	Sandybridge, Sandybridge
[  1434.751] (II) VESA: driver for VESA chipsets: vesa
[  1434.751] (II) FBDEV: driver for framebuffer: fbdev
[  1434.751] (--) using VT number 8

[  1434.758] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  1434.758] (WW) Falling back to old probe method for vesa
[  1434.758] (WW) Falling back to old probe method for fbdev
[  1434.758] (II) Loading sub module "fbdevhw"
[  1434.758] (II) LoadModule: "fbdevhw"
[  1434.758] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  1434.758] (II) Module fbdevhw: vendor="X.Org Foundation"
[  1434.758] 	compiled for 1.10.1, module version = 0.0.2
[  1434.758] 	ABI class: X.Org Video Driver, version 10.0
[  1434.758] drmOpenDevice: node name is /dev/dri/card0
[  1434.758] drmOpenDevice: open result is 11, (OK)
[  1434.758] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[  1434.758] drmOpenDevice: node name is /dev/dri/card0
[  1434.758] drmOpenDevice: open result is 11, (OK)
[  1434.758] drmOpenByBusid: drmOpenMinor returns 11
[  1434.758] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[  1434.758] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
[  1434.758] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  1434.758] (==) intel(0): RGB weight 888
[  1434.758] (==) intel(0): Default visual is TrueColor
[  1434.758] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[  1434.759] (--) intel(0): Chipset: "965GM"
[  1434.759] (**) intel(0): Relaxed fencing enabled
[  1434.759] (**) intel(0): Framebuffer tiled
[  1434.759] (**) intel(0): Pixmaps tiled
[  1434.759] (**) intel(0): 3D buffers tiled
[  1434.759] (**) intel(0): SwapBuffers wait enabled
[  1434.759] (==) intel(0): video overlay key set to 0x101fe
[  1434.759] (II) intel(0): Output LVDS1 using monitor section Configured Monitor
[  1434.760] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[  1434.776] (II) intel(0): Output VGA1 has no monitor section
[  1434.976] (II) intel(0): Output TV1 has no monitor section
[  1434.976] (II) intel(0): EDID for output LVDS1
[  1434.976] (II) intel(0): Manufacturer: SEC  Model: 4457  Serial#: 0
[  1434.976] (II) intel(0): Year: 2007  Week: 0
[  1434.976] (II) intel(0): EDID Version: 1.3
[  1434.976] (II) intel(0): Digital Display Input
[  1434.976] (II) intel(0): Max Image Size [cm]: horiz.: 30  vert.: 19
[  1434.976] (II) intel(0): Gamma: 2.20
[  1434.976] (II) intel(0): No DPMS capabilities specified
[  1434.976] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  1434.976] (II) intel(0): First detailed timing is preferred mode
[  1434.976] (II) intel(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[  1434.976] (II) intel(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[  1434.976] (II) intel(0): Manufacturer's mask: 0
[  1434.976] (II) intel(0): Supported detailed timing:
[  1434.976] (II) intel(0): clock: 108.2 MHz   Image Size:  303 x 190 mm
[  1434.976] (II) intel(0): h_active: 1440  h_sync: 1486  h_sync_end 1556 h_blank_end 1928 h_border: 0
[  1434.977] (II) intel(0): v_active: 900  v_sync: 909  v_sync_end 918 v_blanking: 935 v_border: 0
[  1434.977] (II) intel(0): Unknown vendor-specific block f
[  1434.977] (II) intel(0):  GR619141WD
[  1434.977] (II) intel(0):  )4:Tp��
[  1434.977] (II) intel(0): EDID (in hex):
[  1434.977] (II) intel(0): 	00ffffffffffff004ca3574400000000
[  1434.977] (II) intel(0): 	00110103801e13780a87f594574f8c27
[  1434.977] (II) intel(0): 	27505400000001010101010101010101
[  1434.977] (II) intel(0): 	010101010101442aa0e8518423302e46
[  1434.977] (II) intel(0): 	99002fbe100000190000000f00000000
[  1434.977] (II) intel(0): 	00000000000000000000000000fe0047
[  1434.977] (II) intel(0): 	523631390331343157440a20000000fe
[  1434.977] (II) intel(0): 	001929343a54708ab902010a20200009
[  1434.977] (II) intel(0): EDID vendor "SEC", prod id 17495
[  1434.977] (II) intel(0): Printing DDC gathered Modelines:
[  1434.977] (II) intel(0): Modeline "1440x900"x0.0  108.20  1440 1486 1556 1928  900 909 918 935 -hsync -vsync (56.1 kHz)
[  1434.977] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[  1434.977] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  1434.977] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  1434.977] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[  1434.977] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[  1434.978] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[  1434.978] (II) intel(0): Printing probed modes for output LVDS1
[  1434.978] (II) intel(0): Modeline "1440x900"x60.0  108.20  1440 1486 1556 1928  900 909 918 935 -hsync -vsync (56.1 kHz)
[  1434.978] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[  1434.978] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[  1434.978] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz)
[  1434.978] (II) intel(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
[  1434.978] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  1434.978] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[  1434.978] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[  1434.978] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[  1435.000] (II) intel(0): EDID for output VGA1
[  1435.208] (II) intel(0): EDID for output TV1
[  1435.208] (II) intel(0): Output LVDS1 connected
[  1435.208] (II) intel(0): Output VGA1 disconnected
[  1435.208] (II) intel(0): Output TV1 disconnected
[  1435.208] (II) intel(0): Using exact sizes for initial modes
[  1435.208] (II) intel(0): Output LVDS1 using initial mode 1440x900
[  1435.208] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  1435.208] (II) intel(0): Kernel page flipping support detected, enabling
[  1435.208] (**) intel(0): Display dimensions: (300, 190) mm
[  1435.208] (**) intel(0): DPI set to (121, 120)
[  1435.208] (II) Loading sub module "fb"
[  1435.208] (II) LoadModule: "fb"
[  1435.209] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1435.209] (II) Module fb: vendor="X.Org Foundation"
[  1435.209] 	compiled for 1.10.1, module version = 1.0.0
[  1435.209] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1435.209] (II) Loading sub module "dri2"
[  1435.209] (II) LoadModule: "dri2"
[  1435.210] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  1435.210] (II) Module dri2: vendor="X.Org Foundation"
[  1435.210] 	compiled for 1.10.1, module version = 1.2.0
[  1435.210] 	ABI class: X.Org Server Extension, version 5.0
[  1435.210] (II) UnloadModule: "vesa"
[  1435.210] (II) Unloading vesa
[  1435.210] (II) UnloadModule: "fbdev"
[  1435.210] (II) Unloading fbdev
[  1435.210] (II) UnloadModule: "fbdevhw"
[  1435.210] (II) Unloading fbdevhw
[  1435.210] (==) Depth 24 pixmap format is 32 bpp
[  1435.210] (II) intel(0): [DRI2] Setup complete
[  1435.210] (II) intel(0): [DRI2]   DRI driver: i965
[  1435.210] (II) intel(0): Allocated new frame buffer 1472x900 stride 6144, tiled
[  1435.226] (II) UXA(0): Driver registered support for the following operations:
[  1435.226] (II)         solid
[  1435.226] (II)         copy
[  1435.226] (II)         composite (RENDER acceleration)
[  1435.226] (II)         put_image
[  1435.226] (II)         get_image
[  1435.226] (==) intel(0): Backing store disabled
[  1435.226] (==) intel(0): Silken mouse enabled
[  1435.226] (II) intel(0): Initializing HW Cursor
[  1435.256] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1435.264] (==) intel(0): DPMS enabled
[  1435.264] (II) intel(0): Set up textured video
[  1435.264] (II) intel(0): Set up overlay video
[  1435.264] (II) intel(0): direct rendering: DRI2 Enabled
[  1435.264] (==) intel(0): hotplug detection: "enabled"
[  1435.264] (--) RandR disabled
[  1435.264] (II) Initializing built-in extension Generic Event Extension
[  1435.264] (II) Initializing built-in extension SHAPE
[  1435.264] (II) Initializing built-in extension MIT-SHM
[  1435.264] (II) Initializing built-in extension XInputExtension
[  1435.264] (II) Initializing built-in extension XTEST
[  1435.264] (II) Initializing built-in extension BIG-REQUESTS
[  1435.264] (II) Initializing built-in extension SYNC
[  1435.264] (II) Initializing built-in extension XKEYBOARD
[  1435.264] (II) Initializing built-in extension XC-MISC
[  1435.264] (II) Initializing built-in extension SECURITY
[  1435.264] (II) Initializing built-in extension XINERAMA
[  1435.264] (II) Initializing built-in extension XFIXES
[  1435.264] (II) Initializing built-in extension RENDER
[  1435.265] (II) Initializing built-in extension RANDR
[  1435.265] (II) Initializing built-in extension COMPOSITE
[  1435.265] (II) Initializing built-in extension DAMAGE
[  1435.265] (II) SELinux: Disabled on system
[  1435.274] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  1435.274] (II) AIGLX: enabled GLX_INTEL_swap_event
[  1435.274] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  1435.274] (II) AIGLX: enabled GLX_SGI_make_current_read
[  1435.274] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  1435.274] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[  1435.274] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1435.274] (II) intel(0): Setting screen physical size to 381 x 238
[  1435.314] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
[  1435.314] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1435.314] (II) LoadModule: "evdev"
[  1435.314] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1435.315] (II) Module evdev: vendor="X.Org Foundation"
[  1435.315] 	compiled for 1.10.1, module version = 2.6.0
[  1435.315] 	Module class: X.Org XInput Driver
[  1435.315] 	ABI class: X.Org XInput driver, version 12.2
[  1435.315] (II) Using input driver 'evdev' for 'Video Bus'
[  1435.315] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1435.315] (**) Video Bus: always reports core events
[  1435.315] (**) Video Bus: Device: "/dev/input/event16"
[  1435.328] (--) Video Bus: Found keys
[  1435.328] (II) Video Bus: Configuring as keyboard
[  1435.328] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input16/event16"
[  1435.328] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[  1435.328] (**) Option "xkb_rules" "evdev"
[  1435.328] (**) Option "xkb_model" "pc104"
[  1435.328] (**) Option "xkb_layout" "us"
[  1435.328] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1435.364] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[  1435.364] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1435.364] (II) Using input driver 'evdev' for 'Power Button'
[  1435.364] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1435.364] (**) Power Button: always reports core events
[  1435.364] (**) Power Button: Device: "/dev/input/event4"
[  1435.376] (--) Power Button: Found keys
[  1435.376] (II) Power Button: Configuring as keyboard
[  1435.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[  1435.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  1435.376] (**) Option "xkb_rules" "evdev"
[  1435.376] (**) Option "xkb_model" "pc104"
[  1435.376] (**) Option "xkb_layout" "us"
[  1435.376] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1435.377] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[  1435.377] (II) No input driver/identifier specified (ignoring)
[  1435.378] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[  1435.378] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1435.378] (II) Using input driver 'evdev' for 'Sleep Button'
[  1435.378] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1435.378] (**) Sleep Button: always reports core events
[  1435.378] (**) Sleep Button: Device: "/dev/input/event5"
[  1435.388] (--) Sleep Button: Found keys
[  1435.388] (II) Sleep Button: Configuring as keyboard
[  1435.388] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[  1435.388] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[  1435.388] (**) Option "xkb_rules" "evdev"
[  1435.388] (**) Option "xkb_model" "pc104"
[  1435.388] (**) Option "xkb_layout" "us"
[  1435.388] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1435.395] (II) config/udev: Adding input device Broadcom Corp (/dev/input/event1)
[  1435.395] (**) Broadcom Corp: Applying InputClass "evdev keyboard catchall"
[  1435.395] (II) Using input driver 'evdev' for 'Broadcom Corp'
[  1435.395] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1435.395] (**) Broadcom Corp: always reports core events
[  1435.395] (**) Broadcom Corp: Device: "/dev/input/event1"
[  1435.395] (--) Broadcom Corp: Found keys
[  1435.395] (II) Broadcom Corp: Configuring as keyboard
[  1435.395] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input1/event1"
[  1435.395] (II) XINPUT: Adding extended input device "Broadcom Corp" (type: KEYBOARD)
[  1435.395] (**) Option "xkb_rules" "evdev"
[  1435.395] (**) Option "xkb_model" "pc104"
[  1435.395] (**) Option "xkb_layout" "us"
[  1435.395] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1435.397] (II) config/udev: Adding input device Broadcom Corp (/dev/input/event2)
[  1435.397] (**) Broadcom Corp: Applying InputClass "evdev pointer catchall"
[  1435.397] (II) Using input driver 'evdev' for 'Broadcom Corp'
[  1435.397] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1435.397] (**) Broadcom Corp: always reports core events
[  1435.397] (**) Broadcom Corp: Device: "/dev/input/event2"
[  1435.398] (--) Broadcom Corp: Found 3 mouse buttons
[  1435.398] (--) Broadcom Corp: Found relative axes
[  1435.398] (--) Broadcom Corp: Found x and y relative axes
[  1435.398] (II) Broadcom Corp: Configuring as mouse
[  1435.398] (**) Broadcom Corp: YAxisMapping: buttons 4 and 5
[  1435.398] (**) Broadcom Corp: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1435.398] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input2/event2"
[  1435.398] (II) XINPUT: Adding extended input device "Broadcom Corp" (type: MOUSE)
[  1435.398] (II) Broadcom Corp: initialized for relative axes.
[  1435.398] (**) Broadcom Corp: (accel) keeping acceleration scheme 1
[  1435.398] (**) Broadcom Corp: (accel) acceleration profile 0
[  1435.398] (**) Broadcom Corp: (accel) acceleration factor: 2.000
[  1435.398] (**) Broadcom Corp: (accel) acceleration threshold: 4
[  1435.399] (II) config/udev: Adding input device Broadcom Corp (/dev/input/mouse0)
[  1435.399] (II) No input driver/identifier specified (ignoring)
[  1435.401] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[  1435.401] (II) No input driver/identifier specified (ignoring)
[  1435.402] (II) config/udev: Adding input device HDA Intel Mic at Ext Front Jack (/dev/input/event12)
[  1435.402] (II) No input driver/identifier specified (ignoring)
[  1435.402] (II) config/udev: Adding input device HDA Intel HP Out at Ext Front Jack (/dev/input/event13)
[  1435.403] (II) No input driver/identifier specified (ignoring)
[  1435.403] (II) config/udev: Adding input device HDA Intel HP Out at Ext Front Jack (/dev/input/event14)
[  1435.403] (II) No input driver/identifier specified (ignoring)
[  1435.408] (II) config/udev: Adding input device Laptop Integrated Webcam (/dev/input/event10)
[  1435.408] (**) Laptop Integrated Webcam: Applying InputClass "evdev keyboard catchall"
[  1435.408] (II) Using input driver 'evdev' for 'Laptop Integrated Webcam'
[  1435.408] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1435.409] (**) Laptop Integrated Webcam: always reports core events
[  1435.409] (**) Laptop Integrated Webcam: Device: "/dev/input/event10"
[  1435.409] (--) Laptop Integrated Webcam: Found keys
[  1435.409] (II) Laptop Integrated Webcam: Configuring as keyboard
[  1435.409] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input10/event10"
[  1435.409] (II) XINPUT: Adding extended input device "Laptop Integrated Webcam" (type: KEYBOARD)
[  1435.409] (**) Option "xkb_rules" "evdev"
[  1435.409] (**) Option "xkb_model" "pc104"
[  1435.409] (**) Option "xkb_layout" "us"
[  1435.409] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1435.419] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1435.419] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1435.419] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  1435.419] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1435.419] (**) AT Translated Set 2 keyboard: always reports core events
[  1435.419] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  1435.420] (--) AT Translated Set 2 keyboard: Found keys
[  1435.420] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[  1435.420] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1435.420] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[  1435.420] (**) Option "xkb_rules" "evdev"
[  1435.420] (**) Option "xkb_model" "pc104"
[  1435.420] (**) Option "xkb_layout" "us"
[  1435.420] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1435.421] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event8)
[  1435.421] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[  1435.421] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[  1435.421] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1435.421] (**) PS/2 Mouse: always reports core events
[  1435.421] (**) PS/2 Mouse: Device: "/dev/input/event8"
[  1435.421] (--) PS/2 Mouse: Found 3 mouse buttons
[  1435.421] (--) PS/2 Mouse: Found relative axes
[  1435.421] (--) PS/2 Mouse: Found x and y relative axes
[  1435.421] (II) PS/2 Mouse: Configuring as mouse
[  1435.421] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[  1435.421] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1435.421] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[  1435.421] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[  1435.422] (II) PS/2 Mouse: initialized for relative axes.
[  1435.422] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[  1435.422] (**) PS/2 Mouse: (accel) acceleration profile 0
[  1435.422] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[  1435.422] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[  1435.422] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1)
[  1435.422] (II) No input driver/identifier specified (ignoring)
[  1435.423] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event9)
[  1435.423] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[  1435.423] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[  1435.423] (II) LoadModule: "synaptics"
[  1435.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  1435.424] (II) Module synaptics: vendor="X.Org Foundation"
[  1435.424] 	compiled for 1.10.1, module version = 1.4.0
[  1435.424] 	Module class: X.Org XInput Driver
[  1435.424] 	ABI class: X.Org XInput driver, version 12.2
[  1435.424] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[  1435.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  1435.424] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[  1435.424] (**) Option "Device" "/dev/input/event9"
[  1435.428] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[  1435.428] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[  1435.428] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[  1435.428] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right scroll-buttons
[  1435.428] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 16
[  1435.436] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[  1435.436] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[  1435.440] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[  1435.440] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[  1435.440] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[  1435.440] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[  1435.440] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[  1435.441] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[  1435.441] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[  1435.441] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[  1435.441] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[  1435.444] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[  1435.445] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
[  1435.445] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[  1435.445] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[  1435.445] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  1435.445] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[  1435.445] (**) Option "Device" "/dev/input/mouse2"
[  1435.445] (--) AlpsPS/2 ALPS GlidePoint: invalid x-axis range.  defaulting to 1615 - 5685
[  1435.445] (--) AlpsPS/2 ALPS GlidePoint: invalid y-axis range.  defaulting to 1729 - 4171
[  1435.445] (--) AlpsPS/2 ALPS GlidePoint: invalid pressure range.  defaulting to 0 - 256
[  1435.445] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 16
[  1435.466] (EE) Query no Synaptics: 6003C8
[  1435.466] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
[  1435.466] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
[  1435.468] (EE) PreInit returned 11 for "AlpsPS/2 ALPS GlidePoint"
[  1435.468] (II) UnloadModule: "synaptics"
[  1435.468] (II) Unloading synaptics
[  1435.469] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[  1435.469] (II) No input driver/identifier specified (ignoring)
[  1435.473] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event15)
[  1435.473] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[  1435.473] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[  1435.473] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1435.473] (**) ACPI Virtual Keyboard Device: always reports core events
[  1435.473] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event15"
[  1435.473] (--) ACPI Virtual Keyboard Device: Found keys
[  1435.473] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[  1435.473] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event15"
[  1435.473] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
[  1435.473] (**) Option "xkb_rules" "evdev"
[  1435.473] (**) Option "xkb_model" "pc104"
[  1435.473] (**) Option "xkb_layout" "us"
[  1435.473] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1435.473] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[  1435.473] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  1435.473] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[  1435.473] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  1435.473] (**) Dell WMI hotkeys: always reports core events
[  1435.473] (**) Dell WMI hotkeys: Device: "/dev/input/event7"
[  1435.474] (--) Dell WMI hotkeys: Found keys
[  1435.474] (II) Dell WMI hotkeys: Configuring as keyboard
[  1435.474] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[  1435.474] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
[  1435.474] (**) Option "xkb_rules" "evdev"
[  1435.474] (**) Option "xkb_model" "pc104"
[  1435.474] (**) Option "xkb_layout" "us"
[  1435.474] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  1436.318] (II) intel(0): EDID vendor "SEC", prod id 17495
[  1436.318] (II) intel(0): Printing DDC gathered Modelines:
[  1436.318] (II) intel(0): Modeline "1440x900"x0.0  108.20  1440 1486 1556 1928  900 909 918 935 -hsync -vsync (56.1 kHz)
[  1436.574] (II) intel(0): EDID vendor "SEC", prod id 17495
[  1436.574] (II) intel(0): Printing DDC gathered Modelines:
[  1436.574] (II) intel(0): Modeline "1440x900"x0.0  108.20  1440 1486 1556 1928  900 909 918 935 -hsync -vsync (56.1 kHz)
[  1436.798] (II) intel(0): EDID vendor "SEC", prod id 17495
[  1436.798] (II) intel(0): Printing DDC gathered Modelines:
[  1436.799] (II) intel(0): Modeline "1440x900"x0.0  108.20  1440 1486 1556 1928  900 909 918 935 -hsync -vsync (56.1 kHz)
[  1438.274] (II) intel(0): EDID vendor "SEC", prod id 17495
[  1438.274] (II) intel(0): Printing DDC gathered Modelines:
[  1438.274] (II) intel(0): Modeline "1440x900"x0.0  108.20  1440 1486 1556 1928  900 909 918 935 -hsync -vsync (56.1 kHz)
[  1489.707] (II) intel(0): EDID vendor "SEC", prod id 17495
[  1489.707] (II) intel(0): Printing DDC gathered Modelines:
[  1489.708] (II) intel(0): Modeline "1440x900"x0.0  108.20  1440 1486 1556 1928  900 909 918 935 -hsync -vsync (56.1 kHz)
[  1517.309] [mi] EQ overflowing. The server is probably stuck in an infinite loop.
[  1517.309] 
Backtrace:
[  1517.360] 0: /usr/bin/X (xorg_backtrace+0x28) [0x4a38b8]
[  1517.360] 1: /usr/bin/X (mieqEnqueue+0x1f4) [0x4a2cb4]
[  1517.360] 2: /usr/bin/X (xf86PostMotionEventM+0x97) [0x480037]
[  1517.360] 3: /usr/bin/X (xf86PostMotionEvent+0xde) [0x48024e]
[  1517.361] 4: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f7ec828c000+0x3155) [0x7f7ec828f155]
[  1517.361] 5: /usr/lib/xorg/modules/input/synaptics_drv.so (0x7f7ec828c000+0x4f26) [0x7f7ec8290f26]
[  1517.361] 6: /usr/bin/X (0x400000+0x6d9b7) [0x46d9b7]
[  1517.361] 7: /usr/bin/X (0x400000+0x11ead3) [0x51ead3]
[  1517.361] 8: /lib/libpthread.so.0 (0x7f7ecd545000+0xf020) [0x7f7ecd554020]
[  1517.361] 9: /lib/libc.so.6 (ioctl+0x7) [0x7f7ecc32e2f7]
[  1517.361] 10: /usr/lib/libdrm.so.2 (drmIoctl+0x28) [0x7f7eca6b27d8]
[  1517.361] 11: /usr/lib/libdrm_intel.so.1 (0x7f7eca04f000+0x49ff) [0x7f7eca0539ff]
[  1517.361] 12: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f7eca25a000+0xc4be) [0x7f7eca2664be]
[  1517.361] 13: /usr/bin/X (0x400000+0x13c3fb) [0x53c3fb]
[  1517.361] 14: /usr/bin/X (0x400000+0x1418e1) [0x5418e1]
[  1517.362] 15: /usr/bin/X (0x400000+0x140340) [0x540340]
[  1517.362] 16: /usr/bin/X (miPointerUpdateSprite+0x252) [0x45cc92]
[  1517.362] 17: /usr/bin/X (0x400000+0x5ceed) [0x45ceed]
[  1517.362] 18: /usr/bin/X (0x400000+0xa99ab) [0x4a99ab]
[  1517.362] 19: /usr/bin/X (0x400000+0x169287) [0x569287]
[  1517.362] 20: /usr/bin/X (0x400000+0x38f89) [0x438f89]
[  1517.362] 21: /usr/bin/X (0x400000+0x3c11d) [0x43c11d]
[  1517.362] 22: /usr/bin/X (0x400000+0xe580b) [0x4e580b]
[  1517.362] 23: /usr/bin/X (0x400000+0x101090) [0x501090]
[  1517.363] 24: /usr/bin/X (mieqProcessDeviceEvent+0x1c2) [0x4a30d2]
[  1517.363] 25: /usr/bin/X (mieqProcessInputEvents+0xcc) [0x4a31bc]
[  1517.363] 26: /usr/bin/X (ProcessInputEvents+0x9) [0x46da39]
[  1517.363] 27: /usr/bin/X (0x400000+0x314a3) [0x4314a3]
[  1517.363] 28: /usr/bin/X (0x400000+0x257de) [0x4257de]
[  1517.363] 29: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f7ecc27eead]
[  1517.363] 30: /usr/bin/X (0x400000+0x25389) [0x425389]

udev information:
-----------------
P: /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input16/event16
N: input/event16
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input16/event16
E: MAJOR=13
E: MINOR=80
E: DEVNAME=/dev/input/event16
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.

P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4
N: input/event4
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.

P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event3
N: input/event3
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=Dell Inc.

P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5
N: input/event5
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.

P: /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input1/event1
N: input/event1
S: input/by-id/usb-Broadcom_Corp_4502-event-kbd
S: input/by-path/pci-0000:00:1a.0-usb-0:2.2:1.0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=Broadcom_Corp
E: ID_VENDOR_ENC=Broadcom\x20Corp
E: ID_VENDOR_ID=0a5c
E: ID_MODEL=4502
E: ID_MODEL_ENC=4502
E: ID_MODEL_ID=4502
E: ID_REVISION=0100
E: ID_SERIAL=Broadcom_Corp_4502
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.0-usb-0:2.2:1.0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/input/by-id/usb-Broadcom_Corp_4502-event-kbd /dev/input/by-path/pci-0000:00:1a.0-usb-0:2.2:1.0-event-kbd
E: XKBOPTIONS=terminate:ctrl_alt_bksp

P: /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input2/event2
N: input/event2
S: input/by-id/usb-Broadcom_Corp_4503-event-mouse
S: input/by-path/pci-0000:00:1a.0-usb-0:2.3:1.0-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Broadcom_Corp
E: ID_VENDOR_ENC=Broadcom\x20Corp
E: ID_VENDOR_ID=0a5c
E: ID_MODEL=4503
E: ID_MODEL_ENC=4503
E: ID_MODEL_ID=4503
E: ID_REVISION=0100
E: ID_SERIAL=Broadcom_Corp_4503
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.0-usb-0:2.3:1.0
E: DEVLINKS=/dev/input/by-id/usb-Broadcom_Corp_4503-event-mouse /dev/input/by-path/pci-0000:00:1a.0-usb-0:2.3:1.0-event-mouse

P: /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input2/mouse0
N: input/mouse0
S: input/by-id/usb-Broadcom_Corp_4503-mouse
S: input/by-path/pci-0000:00:1a.0-usb-0:2.3:1.0-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input2/mouse0
E: MAJOR=13
E: MINOR=32
E: DEVNAME=/dev/input/mouse0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Broadcom_Corp
E: ID_VENDOR_ENC=Broadcom\x20Corp
E: ID_VENDOR_ID=0a5c
E: ID_MODEL=4503
E: ID_MODEL_ENC=4503
E: ID_MODEL_ID=4503
E: ID_REVISION=0100
E: ID_SERIAL=Broadcom_Corp_4503
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.0-usb-0:2.3:1.0
E: DEVLINKS=/dev/input/by-id/usb-Broadcom_Corp_4503-mouse /dev/input/by-path/pci-0000:00:1a.0-usb-0:2.3:1.0-mouse

P: /devices/pci0000:00/0000:00:1b.0/input/input11/event11
N: input/event11
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input11/event11
E: MAJOR=13
E: MINOR=75
E: DEVNAME=/dev/input/event11
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
N: input/event12
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
E: MAJOR=13
E: MINOR=76
E: DEVNAME=/dev/input/event12
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
N: input/event13
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
E: MAJOR=13
E: MINOR=77
E: DEVNAME=/dev/input/event13
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event14
N: input/event14
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event14
E: MAJOR=13
E: MINOR=78
E: DEVNAME=/dev/input/event14
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.

P: /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input10/event10
N: input/event10
S: input/by-id/usb-OmniVision_Technologies__Inc._-2640-08.05.12.1_Laptop_Integrated_Webcam-event-if00
S: input/by-path/pci-0000:00:1d.7-usb-0:6:1.0-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=OmniVision_Technologies__Inc._-2640-08.05.12.1
E: ID_VENDOR_ENC=OmniVision\x20Technologies\x2c\x20Inc.\x20-2640-08.05.12.1
E: ID_VENDOR_ID=05a9
E: ID_MODEL=Laptop_Integrated_Webcam
E: ID_MODEL_ENC=Laptop\x20Integrated\x20Webcam
E: ID_MODEL_ID=2640
E: ID_REVISION=0100
E: ID_SERIAL=OmniVision_Technologies__Inc._-2640-08.05.12.1_Laptop_Integrated_Webcam
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1d.7-usb-0:6:1.0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/input/by-id/usb-OmniVision_Technologies__Inc._-2640-08.05.12.1_Laptop_Integrated_Webcam-event-if00 /dev/input/by-path/pci-0000:00:1d.7-usb-0:6:1.0-event
E: XKBOPTIONS=terminate:ctrl_alt_bksp

P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.

P: /devices/platform/i8042/serio1/input/input8/event8
N: input/event8
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse

P: /devices/platform/i8042/serio1/input/input8/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input8/mouse1
E: MAJOR=13
E: MINOR=33
E: DEVNAME=/dev/input/mouse1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse

P: /devices/platform/i8042/serio1/input/input9/event9
N: input/event9
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse

P: /devices/platform/i8042/serio1/input/input9/mouse2
N: input/mouse2
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input9/mouse2
E: MAJOR=13
E: MINOR=34
E: DEVNAME=/dev/input/mouse2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse

P: /devices/platform/pcspkr/input/input6/event6
N: input/event6
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr

P: /devices/virtual/input/input15/event15
N: input/event15
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input15/event15
E: MAJOR=13
E: MINOR=79
E: DEVNAME=/dev/input/event15
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.

P: /devices/virtual/input/input7/event7
N: input/event7
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.


DRM Information from dmesg:
---------------------------
[    0.000000] No AGP bridge found
[    0.000000] No AGP bridge found
[    0.600440] Linux agpgart interface v0.103
[    0.600568] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[    0.600697] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    0.601646] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.601828] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[  129.177551] [drm] Initialized drm 1.1.0 20060810
[  129.313548] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[  129.313551] [drm] Driver supports precise vblank timestamp query.
[  129.369426] [drm] initialized overlay support
[  129.718602] fbcon: inteldrmfb (fb0) is primary device
[  129.719068] fb0: inteldrmfb frame buffer device
[  129.719072] drm: registered panic notifier
[  129.735523] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1680.548835]  [<ffffffffa0742fb4>] ? drm_gem_object_lookup+0x37/0x47 [drm]
[ 1680.548850]  [<ffffffffa07417c0>] ? drm_ioctl+0x24e/0x321 [drm]
[ 1800.548643]  [<ffffffffa0742fb4>] ? drm_gem_object_lookup+0x37/0x47 [drm]
[ 1800.548658]  [<ffffffffa07417c0>] ? drm_ioctl+0x24e/0x321 [drm]
[ 1920.548719]  [<ffffffffa0742fb4>] ? drm_gem_object_lookup+0x37/0x47 [drm]
[ 1920.548734]  [<ffffffffa07417c0>] ? drm_ioctl+0x24e/0x321 [drm]


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages xserver-xorg-video-intel depends on:
ii  libc6                         2.13-4     Embedded GNU C Library: Shared lib
ii  libdrm-intel1                 2.4.25-2   Userspace interface to intel-speci
ii  libdrm2                       2.4.25-2   Userspace interface to kernel DRM 
ii  libpciaccess0                 0.12.1-1   Generic PCI access library for X
ii  libudev0                      167-3      libudev shared library
ii  xserver-xorg-core [xorg-video 2:1.10.1-2 Xorg X server - core server

xserver-xorg-video-intel recommends no packages.

xserver-xorg-video-intel suggests no packages.

-- no debconf information



Reply to: