[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#622894: marked as done (xserver-xorg: VT switching does not work.)



Your message dated Wed, 26 Oct 2011 23:13:30 +0200
with message-id <20111026211330.GA15175@radis.liafa.jussieu.fr>
and subject line Re: Bug#622894: xserver-xorg: VT switching does not work.
has caused the Debian Bug report #622894,
regarding xserver-xorg: VT switching does not work.
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
622894: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=622894
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: xserver-xorg
Version: 1:7.6+6
Severity: important

VT switching (via Ctrl-Alt-F[1-6]) does not work.   When trying to switch, X seems to freeze: no response to kbd, mouse pointer disappears, xclock stops dead.

But, in fact the VT has switched, it is just not reflected on video:  Can type commands, restart xdm and suchlike, when typing blind.  And, when switching "back" to VT7 (via Alt+F7) everything pops back into life.

This is the very behaviour I reported before for xserver-xorg 7.3+20 (i386).

On some occasions though I couldn't get back to VT7, only solution left was magic sysrq -- or power button.

-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Mar  5 18:38 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1783236 Mar 26 08:55 /usr/bin/Xorg

VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03)

Xorg X server configuration file status:
----------------------------------------
-rw-r--r-- 1 root root 2581 Apr 15 18:26 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
-------------------------------
Section "ServerLayout"
	Identifier    "Layout"
	Screen        "Screen"
	InputDevice   "Keyboard"
	InputDevice   "Mouse"
EndSection

Section "ServerFlags"
	#Option "AllowMouseOpenFail" "on" # default: no # try on w/ 2.6.32 nightmare, makes no diff at all!
	Option "DontVTSwitch" "no"
	# from daemonforums.org, for X without hal:
	Option "AllowEmptyInput" "no" # default: on, off for 2.6.32
	Option "AutoAddDevices" "no" # default: on, off for 2.6.32
	# further:
	Option "AutoEnableDevices" "on"

EndSection

Section "Files"
EndSection

Section "InputDevice"
	Identifier  "Keyboard"
	Driver      "evdev"
	Option      "CoreKeyboard" # deprecated, use SendCoreEvents (def: on) # c'd out for 2.6.32
	Option      "Device" "/dev/input/event0"
	Option      "XkbRules" "xorg"
	Option      "XkbModel" "pc105"
	Option      "XkbLayout" "de"
EndSection

Section "InputDevice"
	Identifier "Mouse"
	Driver     "synaptics"
	Option     "GrabDevice" "true"
	Option     "Device" "/dev/input/event6" # c'd IN for 2.6.32
	# synaptics(4) options:
	Option     "Protocol" "auto-dev" # can be "event" for 2.6.32
	Option     "TapButton1" "1"
	Option     "TapButton2" "2"
	Option     "VertTwoFingerScroll" "on"
EndSection

Section "Monitor"
	#DisplaySize	  330   210	# mm
	Identifier   "Monitor"
	#VendorName   "QDS" # optional
	#ModelName    "46"  # optional
	Option "DPMS" "on"
EndSection

Section "Device"
# first: generic options
#	Option      "ModeDebug" "true"
	Identifier  "GraphChip"
	Driver      "intel"
#	Driver      "vesa" # WORKS!
#	Driver      "fbdev"
	BusID       "PCI:0:2:0"
	Screen      0 # Most drivers require that the primary screen (0) be present.
#	VendorName  "Intel Corporation" # optional
# then:  intel options
#	Option      "FallbackDebug" "true" # this produces about 21MB of blah
#	Option      "XvMC" "true" # driver disables this # try without
# final: undocumented:
#	BoardName   "Mobile 915GM/GMS/910GML Express Graphics Controller"
EndSection

#Section "Device" # this works, with quirks
#	Identifier "GraphChip"
#	Driver     "fbdev"
#	Option     "AccelMethod" "XAA"
#	BusID      "PCI:0:2:0"
#EndSection

Section "Screen"
	Identifier "Screen"
	Device     "GraphChip"
	Monitor    "Monitor"
	Option "Accel" # Try to setup XAA (seemed to work with last driver)
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display" # this is default as per fbdev
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection


/etc/X11/xorg.conf.d does not exist.

KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
  options i915 modeset=1

Kernel version (/proc/version):
-------------------------------
Linux version 2.6.30.bootlogd (2.6.30) (root@mash) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 Fri Sep 3 18:13:12 CEST 2010

Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 20268 Apr 15 18:40 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[    28.112] 
X.Org X Server 1.9.5
Release Date: 2011-03-17
[    28.112] X Protocol Version 11, Revision 0
[    28.112] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[    28.112] Current Operating System: Linux mash 2.6.30.bootlogd #1 Fri Sep 3 18:13:12 CEST 2010 i686
[    28.112] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.30.bootlogd root=UUID=8625ed4e-f3d5-4c97-80b2-cb14e856bdb6 ro vga=791
[    28.112] Build Date: 26 March 2011  07:50:38AM
[    28.112] xorg-server 2:1.9.5-1 (Cyril Brulebois <kibi@debian.org>) 
[    28.112] Current version of pixman: 0.16.2
[    28.112] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    28.112] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    28.112] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 15 18:37:09 2011
[    28.155] (==) Using config file: "/etc/X11/xorg.conf"
[    28.162] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    28.186] (==) ServerLayout "Layout"
[    28.186] (**) |-->Screen "Screen" (0)
[    28.186] (**) |   |-->Monitor "Monitor"
[    28.186] (**) |   |-->Device "GraphChip"
[    28.186] (**) |-->Input Device "Keyboard"
[    28.186] (**) |-->Input Device "Mouse"
[    28.186] (**) Option "DontVTSwitch" "no"
[    28.187] (**) Option "AllowEmptyInput" "no"
[    28.187] (**) Option "AutoAddDevices" "no"
[    28.187] (**) Option "AutoEnableDevices" "on"
[    28.187] (**) Not automatically adding devices
[    28.187] (**) Automatically enabling devices
[    28.393] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/cyrillic,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
[    28.393] (==) ModulePath set to "/usr/lib/xorg/modules"
[    28.393] (==) |-->Input Device "Mouse"
[    28.393] (==) The core pointer device wasn't specified explicitly in the layout.
	Using the first mouse device.
[    28.393] (II) Loader magic: 0x81f9f60
[    28.393] (II) Module ABI versions:
[    28.393] 	X.Org ANSI C Emulation: 0.4
[    28.393] 	X.Org Video Driver: 8.0
[    28.393] 	X.Org XInput driver : 11.0
[    28.393] 	X.Org Server Extension : 4.0
[    28.394] (--) PCI:*(0:0:2:0) 8086:2592:1028:01c9 rev 3, Mem @ 0xdff00000/524288, 0xc0000000/268435456, 0xdfec0000/262144, I/O @ 0x0000eff8/8
[    28.394] (--) PCI: (0:0:2:1) 8086:2792:1028:01c9 rev 3, Mem @ 0xdff80000/524288
[    28.394] (II) Open ACPI successful (/var/run/acpid.socket)
[    28.394] (II) LoadModule: "extmod"
[    28.416] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    28.430] (II) Module extmod: vendor="X.Org Foundation"
[    28.430] 	compiled for 1.9.5, module version = 1.0.0
[    28.430] 	Module class: X.Org Server Extension
[    28.430] 	ABI class: X.Org Server Extension, version 4.0
[    28.430] (II) Loading extension SELinux
[    28.430] (II) Loading extension MIT-SCREEN-SAVER
[    28.430] (II) Loading extension XFree86-VidModeExtension
[    28.430] (II) Loading extension XFree86-DGA
[    28.430] (II) Loading extension DPMS
[    28.430] (II) Loading extension XVideo
[    28.430] (II) Loading extension XVideo-MotionCompensation
[    28.430] (II) Loading extension X-Resource
[    28.430] (II) LoadModule: "dbe"
[    28.430] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    28.441] (II) Module dbe: vendor="X.Org Foundation"
[    28.441] 	compiled for 1.9.5, module version = 1.0.0
[    28.441] 	Module class: X.Org Server Extension
[    28.441] 	ABI class: X.Org Server Extension, version 4.0
[    28.441] (II) Loading extension DOUBLE-BUFFER
[    28.441] (II) LoadModule: "glx"
[    28.441] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    28.466] (II) Module glx: vendor="X.Org Foundation"
[    28.466] 	compiled for 1.9.5, module version = 1.0.0
[    28.466] 	ABI class: X.Org Server Extension, version 4.0
[    28.478] (==) AIGLX enabled
[    28.478] (II) Loading extension GLX
[    28.478] (II) LoadModule: "record"
[    28.478] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    28.479] (II) Module record: vendor="X.Org Foundation"
[    28.479] 	compiled for 1.9.5, module version = 1.13.0
[    28.479] 	Module class: X.Org Server Extension
[    28.479] 	ABI class: X.Org Server Extension, version 4.0
[    28.479] (II) Loading extension RECORD
[    28.479] (II) LoadModule: "dri"
[    28.479] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    28.503] (II) Module dri: vendor="X.Org Foundation"
[    28.503] 	compiled for 1.9.5, module version = 1.0.0
[    28.503] 	ABI class: X.Org Server Extension, version 4.0
[    28.503] (II) Loading extension XFree86-DRI
[    28.503] (II) LoadModule: "dri2"
[    28.503] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    28.504] (II) Module dri2: vendor="X.Org Foundation"
[    28.504] 	compiled for 1.9.5, module version = 1.2.0
[    28.504] 	ABI class: X.Org Server Extension, version 4.0
[    28.504] (II) Loading extension DRI2
[    28.504] (II) LoadModule: "intel"
[    28.518] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    28.548] (II) Module intel: vendor="X.Org Foundation"
[    28.548] 	compiled for 1.9.4, module version = 2.14.0
[    28.548] 	Module class: X.Org Video Driver
[    28.548] 	ABI class: X.Org Video Driver, version 8.0
[    28.548] (II) LoadModule: "evdev"
[    28.548] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.549] (II) Module evdev: vendor="X.Org Foundation"
[    28.549] 	compiled for 1.9.4, module version = 2.6.0
[    28.549] 	Module class: X.Org XInput Driver
[    28.549] 	ABI class: X.Org XInput driver, version 11.0
[    28.549] (II) LoadModule: "synaptics"
[    28.550] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    28.570] (II) Module synaptics: vendor="X.Org Foundation"
[    28.570] 	compiled for 1.9.4, module version = 1.4.0
[    28.570] 	Module class: X.Org XInput Driver
[    28.570] 	ABI class: X.Org XInput driver, version 11.0
[    28.570] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
	Sandybridge, Sandybridge
[    28.570] (++) using VT number 7

[    28.570] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[    28.570] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[    29.953] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    29.953] drmOpenDevice: node name is /dev/dri/card0
[    29.953] drmOpenDevice: open result is 8, (OK)
[    30.300] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    30.300] drmOpenDevice: node name is /dev/dri/card0
[    30.300] drmOpenDevice: open result is 8, (OK)
[    30.300] drmOpenByBusid: drmOpenMinor returns 8
[    30.300] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    30.300] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    30.300] (==) intel(0): RGB weight 888
[    30.300] (==) intel(0): Default visual is TrueColor
[    30.300] (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
[    30.300] (--) intel(0): Chipset: "915GM"
[    30.300] (**) intel(0): Tiling enabled
[    30.300] (**) intel(0): SwapBuffers wait enabled
[    30.300] (==) intel(0): video overlay key set to 0x101fe
[    30.512] (II) intel(0): Output VGA1 using monitor section Monitor
[    30.753] (II) intel(0): Output LVDS1 has no monitor section
[    31.036] (II) intel(0): Output TV1 has no monitor section
[    31.247] (II) intel(0): EDID for output VGA1
[    31.503] (II) intel(0): EDID for output LVDS1
[    31.503] (II) intel(0): Manufacturer: QDS  Model: 46  Serial#: 0
[    31.503] (II) intel(0): Year: 2005  Week: 0
[    31.503] (II) intel(0): EDID Version: 1.3
[    31.503] (II) intel(0): Digital Display Input
[    31.503] (II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[    31.503] (II) intel(0): Gamma: 2.20
[    31.503] (II) intel(0): No DPMS capabilities specified
[    31.503] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    31.503] (II) intel(0): First detailed timing is preferred mode
[    31.503] (II) intel(0): redX: 0.579 redY: 0.340   greenX: 0.310 greenY: 0.550
[    31.503] (II) intel(0): blueX: 0.154 blueY: 0.153   whiteX: 0.314 whiteY: 0.329
[    31.503] (II) intel(0): Manufacturer's mask: 0
[    31.503] (II) intel(0): Supported detailed timing:
[    31.503] (II) intel(0): clock: 71.2 MHz   Image Size:  331 x 207 mm
[    31.503] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[    31.503] (II) intel(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
[    31.503] (II) intel(0): Unknown vendor-specific block f
[    31.503] (II) intel(0):  GD738
[    31.503] (II) intel(0):  ???h@
[    31.503] (II) intel(0): EDID (in hex):
[    31.503] (II) intel(0): 	00ffffffffffff004493460000000000
[    31.503] (II) intel(0): 	000f0103802115780a479994574f8c27
[    31.503] (II) intel(0): 	27505400000001010101010101010101
[    31.503] (II) intel(0): 	010101010101cb1b00a0502017303020
[    31.504] (II) intel(0): 	26004bcf100000180000000f0008002a
[    31.504] (II) intel(0): 	0001000400324a041400000000fe0047
[    31.504] (II) intel(0): 	443733380000000000000000000000fe
[    31.504] (II) intel(0): 	00e0d0c0b89868400001010a2020004a
[    31.504] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    31.504] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    31.504] (II) intel(0): Printing probed modes for output LVDS1
[    31.504] (II) intel(0): Modeline "1280x800"x60.0   71.15  1280 1328 1360 1440  800 802 808 823 -hsync -vsync (49.4 kHz)
[    31.504] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    31.504] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    31.504] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    31.504] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    31.787] (II) intel(0): EDID for output TV1
[    31.787] (II) intel(0): Output VGA1 disconnected
[    31.787] (II) intel(0): Output LVDS1 connected
[    31.787] (II) intel(0): Output TV1 disconnected
[    31.787] (II) intel(0): Using exact sizes for initial modes
[    31.787] (II) intel(0): Output LVDS1 using initial mode 1280x800
[    31.787] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    31.787] (==) intel(0): DPI set to (96, 96)
[    31.787] (II) Loading sub module "fb"
[    31.787] (II) LoadModule: "fb"
[    31.787] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.807] (II) Module fb: vendor="X.Org Foundation"
[    31.807] 	compiled for 1.9.5, module version = 1.0.0
[    31.807] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    31.807] (==) Depth 24 pixmap format is 32 bpp
[    31.807] (==) intel(0): VideoRam: 262144 KB
[    31.808] (II) intel(0): [DRI2] Setup complete
[    31.808] (II) intel(0): [DRI2]   DRI driver: i915
[    31.808] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[    31.838] (II) UXA(0): Driver registered support for the following operations:
[    31.838] (II)         solid
[    31.838] (II)         copy
[    31.838] (II)         composite (RENDER acceleration)
[    31.838] (II)         put_image
[    31.838] (II)         get_image
[    31.838] (==) intel(0): Backing store disabled
[    31.838] (==) intel(0): Silken mouse enabled
[    31.839] (II) intel(0): Initializing HW Cursor
[    31.875] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    31.875] (**) intel(0): DPMS enabled
[    31.875] (==) intel(0): Intel XvMC decoder disabled
[    31.875] (II) intel(0): Set up textured video
[    31.875] (II) intel(0): direct rendering: DRI2 Enabled
[    31.875] (WW) intel(0): Option "Accel" is not used
[    31.875] (==) intel(0): hotplug detection: "enabled"
[    31.876] (--) RandR disabled
[    31.876] (II) Initializing built-in extension Generic Event Extension
[    31.876] (II) Initializing built-in extension SHAPE
[    31.876] (II) Initializing built-in extension MIT-SHM
[    31.876] (II) Initializing built-in extension XInputExtension
[    31.876] (II) Initializing built-in extension XTEST
[    31.876] (II) Initializing built-in extension BIG-REQUESTS
[    31.876] (II) Initializing built-in extension SYNC
[    31.876] (II) Initializing built-in extension XKEYBOARD
[    31.876] (II) Initializing built-in extension XC-MISC
[    31.876] (II) Initializing built-in extension SECURITY
[    31.876] (II) Initializing built-in extension XINERAMA
[    31.876] (II) Initializing built-in extension XFIXES
[    31.876] (II) Initializing built-in extension RENDER
[    31.876] (II) Initializing built-in extension RANDR
[    31.876] (II) Initializing built-in extension COMPOSITE
[    31.876] (II) Initializing built-in extension DAMAGE
[    31.876] (II) SELinux: Disabled on system
[    31.979] (EE) AIGLX error: i915 exports no extensions (/usr/lib/dri/i915_dri.so: undefined symbol: __driDriverExtensions)
[    31.980] (EE) AIGLX: reverting to software rendering
[    31.980] (II) AIGLX: Screen 0 is not DRI capable
[    31.980] (EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[    31.980] (EE) GLX: could not load software renderer
[    31.980] (II) GLX: no usable GL providers found for screen 0
[    31.980] (II) intel(0): Setting screen physical size to 338 x 211
[    32.951] (**) Option "CoreKeyboard"
[    32.951] (**) Keyboard: always reports core events
[    32.951] (**) Keyboard: Device: "/dev/input/event0"
[    32.951] (--) Keyboard: Found keys
[    32.951] (II) Keyboard: Configuring as keyboard
[    32.951] (II) XINPUT: Adding extended input device "Keyboard" (type: KEYBOARD)
[    32.951] (**) Option "xkb_rules" "evdev"
[    32.951] (**) Option "xkb_model" "pc105"
[    32.951] (**) Option "xkb_layout" "de"
[    33.070] (**) Option "Device" "/dev/input/event6"
[    33.070] (--) Mouse: x-axis range 1472 - 5472
[    33.070] (--) Mouse: y-axis range 1408 - 4448
[    33.070] (--) Mouse: pressure range 0 - 255
[    33.070] (--) Mouse: finger width range 0 - 0
[    33.070] (--) Mouse: buttons: left right middle double triple
[    33.070] (--) Mouse: invalid finger width range.  defaulting to 0 - 16
[    33.070] (**) Option "VertTwoFingerScroll" "on"
[    33.070] (**) Option "TapButton1" "1"
[    33.070] (**) Option "TapButton2" "2"
[    33.070] (--) Mouse: touchpad found
[    33.070] (**) Mouse: always reports core events
[    33.070] (II) XINPUT: Adding extended input device "Mouse" (type: TOUCHPAD)
[    33.070] (**) Mouse: (accel) MinSpeed is now constant deceleration 2.5
[    33.070] (**) Mouse: MaxSpeed is now 1.75
[    33.070] (**) Mouse: AccelFactor is now 0.040
[    33.070] (**) Mouse: (accel) keeping acceleration scheme 1
[    33.070] (**) Mouse: (accel) acceleration profile 1
[    33.070] (**) Mouse: (accel) acceleration factor: 2.000
[    33.070] (**) Mouse: (accel) acceleration threshold: 4
[    33.071] (--) Mouse: touchpad found
[    33.071] (**) Option "Device" "/dev/input/event6"
[    33.071] (--) Mouse: invalid x-axis range.  defaulting to 1615 - 5685
[    33.071] (--) Mouse: invalid y-axis range.  defaulting to 1729 - 4171
[    33.071] (--) Mouse: invalid pressure range.  defaulting to 0 - 256
[    33.071] (--) Mouse: invalid finger width range.  defaulting to 0 - 16
[    33.071] (**) Option "VertTwoFingerScroll" "on"
[    33.071] (**) Option "TapButton1" "1"
[    33.071] (**) Option "TapButton2" "2"
[    33.071] (--) Mouse: no supported touchpad found
[    33.071] (EE) Mouse Unable to query/initialize Synaptics hardware.
[    33.071] (EE) PreInit returned NULL for "Mouse"
[    33.087] (II) config/udev: Adding input device Video Bus (/dev/input/event1)
[    33.087] (II) AutoAddDevices is off - not adding device.
[    33.087] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[    33.087] (II) AutoAddDevices is off - not adding device.
[    33.093] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    33.093] (II) AutoAddDevices is off - not adding device.
[    33.094] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    33.094] (II) AutoAddDevices is off - not adding device.
[    33.094] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[    33.094] (II) AutoAddDevices is off - not adding device.
[    33.095] (II) config/udev: Adding input device HDA Intel Mic at Ext Left Jack (/dev/input/event7)
[    33.095] (II) AutoAddDevices is off - not adding device.
[    33.095] (II) config/udev: Adding input device HDA Intel HP Out at Ext Left Jack (/dev/input/event8)
[    33.095] (II) AutoAddDevices is off - not adding device.
[    33.100] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    33.100] (II) AutoAddDevices is off - not adding device.
[    33.100] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[    33.100] (II) AutoAddDevices is off - not adding device.
[    33.100] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    33.100] (II) AutoAddDevices is off - not adding device.
[    33.101] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event9)
[    33.102] (II) AutoAddDevices is off - not adding device.
[   236.226] (II) Open ACPI successful (/var/run/acpid.socket)
[   236.680] (II) intel(0): EDID vendor "QDS", prod id 70
[   236.680] (II) intel(0): Printing DDC gathered Modelines:
[   236.680] (II) intel(0): Modeline "1280x800"x0.0   71.15  1280 1328 1360 1440  800 802 808 823 -hsync -vsync (49.4 kHz)
[   236.968] (--) Mouse: touchpad found

udev information:
-----------------
P: /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/input/input1/event1
N: input/event1
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.

P: /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:26/input/input2/event2
N: input/event2
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:26/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.

P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4
N: input/event4
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.

P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event3
N: input/event3
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event3
E: ID_INPUT=1
E: DMI_VENDOR=Dell Inc.

P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5
N: input/event5
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.

P: /devices/pci0000:00/0000:00:1b.0/input/input7/event7
N: input/event7
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event7
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.

P: /devices/pci0000:00/0000:00:1b.0/input/input8/event8
N: input/event8
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.

P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.

P: /devices/platform/i8042/serio1/input/input6/event6
N: input/event6
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event6
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse

P: /devices/platform/i8042/serio1/input/input6/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse0
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse

P: /devices/virtual/input/input9/event9
N: input/event9
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event9
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: XKBOPTIONS=terminate:ctrl_alt_bksp
E: DMI_VENDOR=Dell Inc.


DRM Information from dmesg:
---------------------------
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 915GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[drm] Initialized drm 1.1.0 20060810
[drm] DAC-6: set mode 640x480 0
[drm] TV-13: set mode NTSC 480i 0
fb1: inteldrmfb frame buffer device
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[drm] LVDS-8: set mode 1280x800 15
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] TV-13: set mode NTSC 480i 0
[drm] TV-13: set mode NTSC 480i 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] TV-13: set mode NTSC 480i 0
[drm] TV-13: set mode NTSC 480i 0
[drm] DAC-6: set mode 640x480 0
[drm] DAC-6: set mode 640x480 0
[drm] TV-13: set mode NTSC 480i 0
[drm] TV-13: set mode NTSC 480i 0


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.30.bootlogd
Locale: LANG=de_AT@euro, LC_CTYPE=de_AT (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C)
Shell: /bin/sh linked to /bin/dash

Versions of packages xserver-xorg depends on:
ii  libc6                         2.11.2-11  Embedded GNU C Library: Shared lib
ii  x11-xkb-utils                 7.4+1      X11 XKB utilities
ii  xkb-data                      1.7-1      X Keyboard Extension (XKB) configu
ii  xserver-xorg-core             2:1.9.5-1  Xorg X server - core server
ii  xserver-xorg-input-evdev [xor 1:2.6.0-2  X.Org X server -- evdev input driv
ii  xserver-xorg-input-synaptics  1.4.0-1    Synaptics TouchPad driver for X.Or
ii  xserver-xorg-video-intel [xor 2:2.14.0-4 X.Org X server -- Intel i8xx, i9xx

Versions of packages xserver-xorg recommends:
ii  libgl1-mesa-dri               7.0.3-7    A free implementation of the OpenG

xserver-xorg suggests no packages.

-- no debconf information



--- End Message ---
--- Begin Message ---
On Sun, May 15, 2011 at 17:11:25 +0200, enno.vet@gmx.net wrote:

> >>>>> "JC" == Julien Cristau <jcristau@debian.org> writes:
> > On Fri, Apr 15, 2011 at 18:46:51 +0200, Enno Deimel wrote:
>     >> Kernel version (/proc/version): -------------------------------
>     >> Linux version 2.6.30.bootlogd (2.6.30) (root@mash) (gcc version
>     >> 4.3.4 (Debian 4.3.4-6) ) #1 Fri Sep 3 18:13:12 CEST 2010
>     >> 
> > Try again without xorg.conf and with debian's standard kernel
> > (2.6.32 or 2.6.38).
> > 
> > Cheers, Julien
> 
> Did that.  Doesn't work with 2.6.32-5-686.  X just doesn't start,
> claiming it finds no screen.
> 
> BUT o miracle it works with 2.6.38-2-686!
> 
Closing as fixed in newer kernels then, thanks.

Cheers,
Julien


--- End Message ---

Reply to: