Bug#646575: libdrm-nouveau1: Top third of screen blacks out periodically.
Package: libdrm-nouveau1
Version: 2.4.21-1~squeeze3
Severity: normal
The top third of the screen periodically blacks out. A segment fault is logged
in kern.log. Moving the mouse into the blacked out area causes widgets that are
passed over to be redrawn. The application does not appear to be affected. The
quickest way to get the complete screen redrawn is to minimise the top panel of
the desktop. The fault does not appear to be related to the current active
application, nor does it appear to have any idle time dependency.
-- System Information:
Debian Release: 6.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages libdrm-nouveau1 depends on:
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
ii libdrm2 2.4.21-1~squeeze3 Userspace interface to kernel DRM
libdrm-nouveau1 recommends no packages.
libdrm-nouveau1 suggests no packages.
-- no debconf information
Oct 24 17:11:14 floss kernel: [ 4580.428120] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
Oct 24 17:11:14 floss kernel: [ 4580.433007] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
Oct 24 17:11:14 floss kernel: [ 4580.438712] firefox-bin[12766]: segfault at b4b20b8c ip b4afe7cd sp bfa602a0 error 7 in libdrm_nouveau.so.1.0.0[b4afc000+4000]
Oct 24 17:11:14 floss kernel: [ 4580.440234] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 2
Oct 24 17:29:18 floss kernel: [ 5663.832435] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
Oct 24 17:29:18 floss kernel: [ 5664.485184] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
Oct 24 17:29:18 floss kernel: [ 5664.488444] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
Oct 24 17:29:19 floss kernel: Kernel logging (proc) stopped.
Oct 24 17:29:19 floss kernel: Kernel log daemon terminating.
Oct 25 09:19:03 floss kernel: klogd 1.5.0#6, log source = /proc/kmsg started.
Oct 25 09:19:03 floss kernel: [ 0.000000] Initializing cgroup subsys cpuset
Oct 25 09:19:03 floss kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 25 09:19:03 floss kernel: [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-38) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 04:15:24 UTC 2011
Oct 25 09:19:03 floss kernel: [ 0.000000] KERNEL supported cpus:
Oct 25 09:19:03 floss kernel: [ 0.000000] Intel GenuineIntel
Oct 25 09:19:03 floss kernel: [ 0.000000] AMD AuthenticAMD
Oct 25 09:19:03 floss kernel: [ 0.000000] NSC Geode by NSC
Oct 25 09:19:03 floss kernel: [ 0.000000] Cyrix CyrixInstead
Oct 25 09:19:03 floss kernel: [ 0.000000] Centaur CentaurHauls
Oct 25 09:19:03 floss kernel: [ 0.000000] Transmeta GenuineTMx86
Oct 25 09:19:03 floss kernel: [ 0.000000] Transmeta TransmetaCPU
Oct 25 09:19:03 floss kernel: [ 0.000000] UMC UMC UMC UMC
Oct 25 09:19:03 floss kernel: [ 0.000000] BIOS-provided physical RAM map:
Oct 25 09:19:03 floss kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct 25 09:19:03 floss kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct 25 09:19:03 floss kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 25 09:19:03 floss kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
Oct 25 09:19:03 floss kernel: [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
Oct 25 09:19:03 floss kernel: [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
Oct 25 09:19:03 floss kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Oct 25 09:19:03 floss kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 25 09:19:03 floss kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Oct 25 09:19:03 floss kernel: [ 0.000000] DMI 2.3 present.
Oct 25 09:19:03 floss kernel: [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
Oct 25 09:19:03 floss kernel: [ 0.000000] MTRR default type: uncachable
Oct 25 09:19:03 floss kernel: [ 0.000000] MTRR fixed ranges enabled:
Oct 25 09:19:03 floss kernel: [ 0.000000] 00000-9FFFF write-back
Oct 25 09:19:03 floss kernel: [ 0.000000] A0000-BFFFF uncachable
Oct 25 09:19:03 floss kernel: [ 0.000000] C0000-CAFFF write-protect
Oct 25 09:19:03 floss kernel: [ 0.000000] CB000-EFFFF uncachable
Oct 25 09:19:03 floss kernel: [ 0.000000] F0000-F7FFF write-through
Oct 25 09:19:03 floss kernel: [ 0.000000] F8000-F8FFF uncachable
Oct 25 09:19:03 floss kernel: [ 0.000000] F9000-FFFFF write-through
Oct 25 09:19:03 floss kernel: [ 0.000000] MTRR variable ranges enabled:
Oct 25 09:19:03 floss kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back
Oct 25 09:19:03 floss kernel: [ 0.000000] 1 base 0D8000000 mask FFC000000 write-combining
Oct 25 09:19:03 floss kernel: [ 0.000000] 2 disabled
Oct 25 09:19:03 floss kernel: [ 0.000000] 3 disabled
Oct 25 09:19:03 floss kernel: [ 0.000000] 4 disabled
Oct 25 09:19:03 floss kernel: [ 0.000000] 5 disabled
Oct 25 09:19:03 floss kernel: [ 0.000000] 6 disabled
Oct 25 09:19:03 floss kernel: [ 0.000000] 7 disabled
Oct 25 09:19:03 floss kernel: [ 0.000000] PAT not supported by CPU.
Oct 25 09:19:03 floss kernel: [ 0.000000] initial memory mapped : 0 - 01800000
Oct 25 09:19:03 floss kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
Oct 25 09:19:03 floss kernel: [ 0.000000] 0000000000 - 0000400000 page 4k
Oct 25 09:19:03 floss kernel: [ 0.000000] 0000400000 - 0037000000 page 2M
Oct 25 09:19:03 floss kernel: [ 0.000000] 0037000000 - 00373fe000 page 4k
Oct 25 09:19:03 floss kernel: [ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
Oct 25 09:19:03 floss kernel: [ 0.000000] RAMDISK: 377ac000 - 37fef4be
Oct 25 09:19:03 floss kernel: [ 0.000000] Allocated new RAMDISK: 00100000 - 009434be
Oct 25 09:19:03 floss kernel: [ 0.000000] Move RAMDISK from 00000000377ac000 - 0000000037fef4bd to 00100000 - 009434bd
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: RSDP 000f70b0 00014 (v00 VIA694)
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: RSDT 7fff3000 0002C (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000)
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: FACP 7fff3040 00074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000)
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: DSDT 7fff30c0 025CA (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C)
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: FACS 7fff0000 00040
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: APIC 7fff56c0 0005C (v01 VIA694 00000000 00000000)
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Oct 25 09:19:03 floss kernel: [ 0.000000] 1163MB HIGHMEM available.
Oct 25 09:19:03 floss kernel: [ 0.000000] 883MB LOWMEM available.
Oct 25 09:19:03 floss kernel: [ 0.000000] mapped low ram: 0 - 373fe000
Oct 25 09:19:03 floss kernel: [ 0.000000] low ram: 0 - 373fe000
Oct 25 09:19:03 floss kernel: [ 0.000000] node 0 low ram: 00000000 - 373fe000
Oct 25 09:19:03 floss kernel: [ 0.000000] node 0 bootmap 00009000 - 0000fe80
Oct 25 09:19:03 floss kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
Oct 25 09:19:03 floss kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Oct 25 09:19:03 floss kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
Oct 25 09:19:03 floss kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
Oct 25 09:19:03 floss kernel: [ 0.000000] #3 [0001000000 - 00014cccf4] TEXT DATA BSS ==> [0001000000 - 00014cccf4]
Oct 25 09:19:03 floss kernel: [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
Oct 25 09:19:03 floss kernel: [ 0.000000] #5 [00014cd000 - 00014d30b6] BRK ==> [00014cd000 - 00014d30b6]
Oct 25 09:19:03 floss kernel: [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
Oct 25 09:19:03 floss kernel: [ 0.000000] #7 [0000100000 - 00009434be] NEW RAMDISK ==> [0000100000 - 00009434be]
Oct 25 09:19:03 floss kernel: [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
Oct 25 09:19:03 floss kernel: [ 0.000000] found SMP MP-table at [c00f5770] f5770
Oct 25 09:19:03 floss kernel: [ 0.000000] Zone PFN ranges:
Oct 25 09:19:03 floss kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000
Oct 25 09:19:03 floss kernel: [ 0.000000] Normal 0x00001000 -> 0x000373fe
Oct 25 09:19:03 floss kernel: [ 0.000000] HighMem 0x000373fe -> 0x0007fff0
Oct 25 09:19:03 floss kernel: [ 0.000000] Movable zone start PFN for each node
Oct 25 09:19:03 floss kernel: [ 0.000000] early_node_map[2] active PFN ranges
Oct 25 09:19:03 floss kernel: [ 0.000000] 0: 0x00000000 -> 0x0000009f
Oct 25 09:19:03 floss kernel: [ 0.000000] 0: 0x00000100 -> 0x0007fff0
Oct 25 09:19:03 floss kernel: [ 0.000000] On node 0 totalpages: 524175
Oct 25 09:19:03 floss kernel: [ 0.000000] free_area_init_node: node 0, pgdat c13b4860, node_mem_map c14d5000
Oct 25 09:19:03 floss kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Oct 25 09:19:03 floss kernel: [ 0.000000] DMA zone: 0 pages reserved
Oct 25 09:19:03 floss kernel: [ 0.000000] DMA zone: 3967 pages, LIFO batch:0
Oct 25 09:19:03 floss kernel: [ 0.000000] Normal zone: 1736 pages used for memmap
Oct 25 09:19:03 floss kernel: [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
Oct 25 09:19:03 floss kernel: [ 0.000000] HighMem zone: 2328 pages used for memmap
Oct 25 09:19:03 floss kernel: [ 0.000000] HighMem zone: 295642 pages, LIFO batch:31
Oct 25 09:19:03 floss kernel: [ 0.000000] Using APIC driver default
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 25 09:19:03 floss kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 dfl dfl)
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: IRQ0 used by override.
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: IRQ2 used by override.
Oct 25 09:19:03 floss kernel: [ 0.000000] ACPI: IRQ11 used by override.
Oct 25 09:19:03 floss kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Oct 25 09:19:03 floss kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Oct 25 09:19:03 floss kernel: [ 0.000000] nr_irqs_gsi: 24
Oct 25 09:19:03 floss kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Oct 25 09:19:03 floss kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Oct 25 09:19:03 floss kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Oct 25 09:19:03 floss kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
Oct 25 09:19:03 floss kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Oct 25 09:19:03 floss kernel: [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
Oct 25 09:19:03 floss kernel: [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34328 r0 d23016 u2097152
Oct 25 09:19:03 floss kernel: [ 0.000000] pcpu-alloc: s34328 r0 d23016 u2097152 alloc=1*4194304
Oct 25 09:19:03 floss kernel: [ 0.000000] pcpu-alloc: [0] 0 1
Oct 25 09:19:03 floss kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520079
Oct 25 09:19:03 floss kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=54a7949e-7b4c-4e7c-aff4-661f92a67b4a ro scsi=probe quiet
Oct 25 09:19:03 floss kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
Oct 25 09:19:03 floss kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 25 09:19:03 floss kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 25 09:19:03 floss kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Oct 25 09:19:03 floss kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Oct 25 09:19:03 floss kernel: [ 0.000000] Initializing CPU#0
Oct 25 09:19:03 floss kernel: [ 0.000000] Initializing HighMem for node 0 (000373fe:0007fff0)
Oct 25 09:19:03 floss kernel: [ 0.000000] Memory: 2064816k/2097088k available (2504k kernel code, 30776k reserved, 1328k data, 380k init, 1191880k highmem)
Oct 25 09:19:03 floss kernel: [ 0.000000] virtual kernel memory layout:
Oct 25 09:19:03 floss kernel: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
Oct 25 09:19:03 floss kernel: [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
Oct 25 09:19:03 floss kernel: [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
Oct 25 09:19:03 floss kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
Oct 25 09:19:03 floss kernel: [ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
Oct 25 09:19:03 floss kernel: [ 0.000000] .data : 0xc12721f1 - 0xc13be480 (1328 kB)
Oct 25 09:19:03 floss kernel: [ 0.000000] .text : 0xc1000000 - 0xc12721f1 (2504 kB)
Oct 25 09:19:03 floss kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Oct 25 09:19:03 floss kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Oct 25 09:19:03 floss kernel: [ 0.000000] Hierarchical RCU implementation.
Oct 25 09:19:03 floss kernel: [ 0.000000] NR_IRQS:1280
Oct 25 09:19:03 floss kernel: [ 0.000000] Console: colour VGA+ 80x25
Oct 25 09:19:03 floss kernel: [ 0.000000] console [tty0] enabled
Oct 25 09:19:03 floss kernel: [ 0.000000] Fast TSC calibration using PIT
Oct 25 09:19:03 floss kernel: [ 0.000000] Detected 998.385 MHz processor.
Oct 25 09:19:03 floss kernel: [ 0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.77 BogoMIPS (lpj=3993540)
Oct 25 09:19:03 floss kernel: [ 0.004081] Security Framework initialized
Oct 25 09:19:03 floss kernel: [ 0.004106] SELinux: Disabled at boot.
Oct 25 09:19:03 floss kernel: [ 0.004132] Mount-cache hash table entries: 512
Oct 25 09:19:03 floss kernel: [ 0.004556] Initializing cgroup subsys ns
Oct 25 09:19:03 floss kernel: [ 0.004574] Initializing cgroup subsys cpuacct
Oct 25 09:19:03 floss kernel: [ 0.004586] Initializing cgroup subsys devices
Oct 25 09:19:03 floss kernel: [ 0.004593] Initializing cgroup subsys freezer
Oct 25 09:19:03 floss kernel: [ 0.004599] Initializing cgroup subsys net_cls
Oct 25 09:19:03 floss kernel: [ 0.004668] CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 25 09:19:03 floss kernel: [ 0.004675] CPU: L2 cache: 256K
Oct 25 09:19:03 floss kernel: [ 0.004681] CPU serial number disabled.
Oct 25 09:19:03 floss kernel: [ 0.004692] mce: CPU supports 5 MCE banks
Oct 25 09:19:03 floss kernel: [ 0.004739] Performance Events: p6 PMU driver.
Oct 25 09:19:03 floss kernel: [ 0.004756] ... version: 0
Oct 25 09:19:03 floss kernel: [ 0.004761] ... bit width: 32
Oct 25 09:19:03 floss kernel: [ 0.004765] ... generic registers: 2
Oct 25 09:19:03 floss kernel: [ 0.004770] ... value mask: 00000000ffffffff
Oct 25 09:19:03 floss kernel: [ 0.004775] ... max period: 000000007fffffff
Oct 25 09:19:03 floss kernel: [ 0.004780] ... fixed-purpose events: 0
Oct 25 09:19:03 floss kernel: [ 0.004784] ... event mask: 0000000000000003
Oct 25 09:19:03 floss kernel: [ 0.004797] Checking 'hlt' instruction... OK.
Oct 25 09:19:03 floss kernel: [ 0.022390] ACPI: Core revision 20090903
Oct 25 09:19:03 floss kernel: [ 0.028422] Enabling APIC mode: Flat. Using 1 I/O APICs
Oct 25 09:19:03 floss kernel: [ 0.029723] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 25 09:19:03 floss kernel: [ 0.069784] CPU0: Intel Pentium III (Coppermine) stepping 06
Oct 25 09:19:03 floss kernel: [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
Oct 25 09:19:03 floss kernel: [ 0.008000] Initializing CPU#1
Oct 25 09:19:03 floss kernel: [ 0.008000] CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 25 09:19:03 floss kernel: [ 0.008000] CPU: L2 cache: 256K
Oct 25 09:19:03 floss kernel: [ 0.008000] CPU serial number disabled.
Oct 25 09:19:03 floss kernel: [ 0.160134] CPU1: Intel Pentium III (Coppermine) stepping 06
Oct 25 09:19:03 floss kernel: [ 0.160155] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Oct 25 09:19:03 floss kernel: [ 0.164190] Brought up 2 CPUs
Oct 25 09:19:03 floss kernel: [ 0.164199] Total of 2 processors activated (3993.62 BogoMIPS).
Oct 25 09:19:03 floss kernel: [ 0.165359] CPU0 attaching sched-domain:
Oct 25 09:19:03 floss kernel: [ 0.165370] domain 0: span 0-1 level CPU
Oct 25 09:19:03 floss kernel: [ 0.165377] groups: group c28037e4 cpus 0 group c2a037e4 cpus 1
Oct 25 09:19:03 floss kernel: [ 0.165393] CPU1 attaching sched-domain:
Oct 25 09:19:03 floss kernel: [ 0.165399] domain 0: span 0-1 level CPU
Oct 25 09:19:03 floss kernel: [ 0.165404] groups: group c2a037e4 cpus 1 group c28037e4 cpus 0
Oct 25 09:19:03 floss kernel: [ 0.165641] devtmpfs: initialized
Oct 25 09:19:03 floss kernel: [ 0.165641] regulator: core version 0.5
Oct 25 09:19:03 floss kernel: [ 0.165641] NET: Registered protocol family 16
Oct 25 09:19:03 floss kernel: [ 0.165641] ACPI: bus type pci registered
Oct 25 09:19:03 floss kernel: [ 0.199807] PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1
Oct 25 09:19:03 floss kernel: [ 0.199813] PCI: Using configuration type 1 for base access
Oct 25 09:19:03 floss kernel: [ 0.199883] mtrr: your CPUs had inconsistent fixed MTRR settings
Oct 25 09:19:03 floss kernel: [ 0.199889] mtrr: your CPUs had inconsistent variable MTRR settings
Oct 25 09:19:03 floss kernel: [ 0.199894] mtrr: probably your BIOS does not setup all CPUs.
Oct 25 09:19:03 floss kernel: [ 0.199898] mtrr: corrected configuration.
Oct 25 09:19:03 floss kernel: [ 0.200719] bio: create slab <bio-0> at 0
Oct 25 09:19:03 floss kernel: [ 0.200719] ACPI: EC: Look up EC in DSDT
Oct 25 09:19:03 floss kernel: [ 0.209649] ACPI: Interpreter enabled
Oct 25 09:19:03 floss kernel: [ 0.209663] ACPI: (supports S0 S1 S4 S5)
Oct 25 09:19:03 floss kernel: [ 0.209715] ACPI: Using IOAPIC for interrupt routing
Oct 25 09:19:03 floss kernel: [ 0.217118] ACPI: No dock devices found.
Oct 25 09:19:03 floss kernel: [ 0.217320] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 25 09:19:03 floss kernel: [ 0.217420] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdbffffff]
Oct 25 09:19:03 floss kernel: [ 0.217513] pci 0000:00:01.0: supports D1
Oct 25 09:19:03 floss kernel: [ 0.217634] pci 0000:00:07.1: reg 20 io port: [0x9000-0x900f]
Oct 25 09:19:03 floss kernel: [ 0.217707] pci 0000:00:07.2: reg 20 io port: [0x9400-0x941f]
Oct 25 09:19:03 floss kernel: [ 0.217778] pci 0000:00:07.3: reg 20 io port: [0x9800-0x981f]
Oct 25 09:19:03 floss kernel: [ 0.217867] pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon
Oct 25 09:19:03 floss kernel: [ 0.217875] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB
Oct 25 09:19:03 floss kernel: [ 0.217928] pci 0000:00:09.0: reg 10 io port: [0x9c00-0x9cff]
Oct 25 09:19:03 floss kernel: [ 0.217943] pci 0000:00:09.0: reg 14 64bit mmio: [0xdf000000-0xdf000fff]
Oct 25 09:19:03 floss kernel: [ 0.217965] pci 0000:00:09.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
Oct 25 09:19:03 floss kernel: [ 0.218007] pci 0000:00:0a.0: reg 10 io port: [0xa000-0xa0ff]
Oct 25 09:19:03 floss kernel: [ 0.218018] pci 0000:00:0a.0: reg 14 32bit mmio: [0xdf001000-0xdf001fff]
Oct 25 09:19:03 floss kernel: [ 0.218044] pci 0000:00:0a.0: reg 30 32bit mmio pref: [0x000000-0x007fff]
Oct 25 09:19:03 floss kernel: [ 0.218084] pci 0000:00:0b.0: reg 10 32bit mmio: [0xdf002000-0xdf002fff]
Oct 25 09:19:03 floss kernel: [ 0.218124] pci 0000:00:0b.0: supports D1 D2
Oct 25 09:19:03 floss kernel: [ 0.218130] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
Oct 25 09:19:03 floss kernel: [ 0.218139] pci 0000:00:0b.0: PME# disabled
Oct 25 09:19:03 floss kernel: [ 0.218174] pci 0000:00:0b.1: reg 10 32bit mmio: [0xdf003000-0xdf003fff]
Oct 25 09:19:03 floss kernel: [ 0.218214] pci 0000:00:0b.1: supports D1 D2
Oct 25 09:19:03 floss kernel: [ 0.218220] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot
Oct 25 09:19:03 floss kernel: [ 0.218228] pci 0000:00:0b.1: PME# disabled
Oct 25 09:19:03 floss kernel: [ 0.218263] pci 0000:00:0b.2: reg 10 32bit mmio: [0xdf004000-0xdf0040ff]
Oct 25 09:19:03 floss kernel: [ 0.218303] pci 0000:00:0b.2: supports D1 D2
Oct 25 09:19:03 floss kernel: [ 0.218309] pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot
Oct 25 09:19:03 floss kernel: [ 0.218316] pci 0000:00:0b.2: PME# disabled
Oct 25 09:19:03 floss kernel: [ 0.218358] pci 0000:00:0c.0: reg 10 io port: [0xa400-0xa4ff]
Oct 25 09:19:03 floss kernel: [ 0.218369] pci 0000:00:0c.0: reg 14 32bit mmio: [0xdf005000-0xdf0050ff]
Oct 25 09:19:03 floss kernel: [ 0.218394] pci 0000:00:0c.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
Oct 25 09:19:03 floss kernel: [ 0.218414] pci 0000:00:0c.0: supports D1 D2
Oct 25 09:19:03 floss kernel: [ 0.218420] pci 0000:00:0c.0: PME# supported from D1 D2 D3hot D3cold
Oct 25 09:19:03 floss kernel: [ 0.218428] pci 0000:00:0c.0: PME# disabled
Oct 25 09:19:03 floss kernel: [ 0.218463] pci 0000:00:0d.0: reg 10 io port: [0xa800-0xa81f]
Oct 25 09:19:03 floss kernel: [ 0.218503] pci 0000:00:0d.0: supports D1 D2
Oct 25 09:19:03 floss kernel: [ 0.218543] pci 0000:00:0d.1: reg 10 io port: [0xac00-0xac07]
Oct 25 09:19:03 floss kernel: [ 0.218583] pci 0000:00:0d.1: supports D1 D2
Oct 25 09:19:03 floss kernel: [ 0.218626] pci 0000:00:0e.0: reg 10 io port: [0xb000-0xb007]
Oct 25 09:19:03 floss kernel: [ 0.218637] pci 0000:00:0e.0: reg 14 io port: [0xb400-0xb403]
Oct 25 09:19:03 floss kernel: [ 0.218647] pci 0000:00:0e.0: reg 18 io port: [0xb800-0xb807]
Oct 25 09:19:03 floss kernel: [ 0.218658] pci 0000:00:0e.0: reg 1c io port: [0xbc00-0xbc03]
Oct 25 09:19:03 floss kernel: [ 0.218668] pci 0000:00:0e.0: reg 20 io port: [0xc000-0xc0ff]
Oct 25 09:19:03 floss kernel: [ 0.218682] pci 0000:00:0e.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
Oct 25 09:19:03 floss kernel: [ 0.218764] pci 0000:01:00.0: reg 10 32bit mmio: [0xdc000000-0xdcffffff]
Oct 25 09:19:03 floss kernel: [ 0.218775] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd0000000-0xd7ffffff]
Oct 25 09:19:03 floss kernel: [ 0.218798] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
Oct 25 09:19:03 floss kernel: [ 0.218864] pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xddffffff]
Oct 25 09:19:03 floss kernel: [ 0.218873] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
Oct 25 09:19:03 floss kernel: [ 0.218886] pci_bus 0000:00: on NUMA node 0
Oct 25 09:19:03 floss kernel: [ 0.218900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 25 09:19:03 floss kernel: [ 0.219185] ACPI Warning for \_SB_.PCI0._PRT: Return Package type mismatch at index 3 - found Reference, expected Integer (20090903/nspredef-1012)
Oct 25 09:19:03 floss kernel: [ 0.219212] ACPI Warning: (PRT[18].Source) SourceName and SourceIndex are reversed, fixed (20090903/rscreate-277)
Oct 25 09:19:03 floss kernel: [ 0.219226] ACPI Warning: (PRT[19].Source) SourceName and SourceIndex are reversed, fixed (20090903/rscreate-277)
Oct 25 09:19:03 floss kernel: [ 0.219240] ACPI Warning: (PRT[1A].Source) SourceName and SourceIndex are reversed, fixed (20090903/rscreate-277)
Oct 25 09:19:03 floss kernel: [ 0.219253] ACPI Warning: (PRT[1B].Source) SourceName and SourceIndex are reversed, fixed (20090903/rscreate-277)
Oct 25 09:19:03 floss kernel: [ 0.265547] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Oct 25 09:19:03 floss kernel: [ 0.265875] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Oct 25 09:19:03 floss kernel: [ 0.266211] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Oct 25 09:19:03 floss kernel: [ 0.266546] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
Oct 25 09:19:03 floss kernel: [ 0.266821] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Oct 25 09:19:03 floss kernel: [ 0.266828] vgaarb: loaded
Oct 25 09:19:03 floss kernel: [ 0.266991] PCI: Using ACPI for IRQ routing
Oct 25 09:19:03 floss kernel: [ 0.266991] Switching to clocksource tsc
Oct 25 09:19:03 floss kernel: [ 0.267455] pnp: PnP ACPI init
Oct 25 09:19:03 floss kernel: [ 0.267540] ACPI: bus type pnp registered
Oct 25 09:19:03 floss kernel: [ 0.273865] pnp: PnP ACPI: found 13 devices
Oct 25 09:19:03 floss kernel: [ 0.273873] ACPI: ACPI bus type pnp unregistered
Oct 25 09:19:03 floss kernel: [ 0.273885] PnPBIOS: Disabled by ACPI PNP
Oct 25 09:19:03 floss kernel: [ 0.273916] system 00:00: iomem range 0xd7000-0xd7fff has been reserved
Oct 25 09:19:03 floss kernel: [ 0.273924] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
Oct 25 09:19:03 floss kernel: [ 0.273933] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
Oct 25 09:19:03 floss kernel: [ 0.273941] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
Oct 25 09:19:03 floss kernel: [ 0.273950] system 00:00: iomem range 0x7fff0000-0x7fffffff could not be reserved
Oct 25 09:19:03 floss kernel: [ 0.273960] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
Oct 25 09:19:03 floss kernel: [ 0.273968] system 00:00: iomem range 0x0-0x9ffff could not be reserved
Oct 25 09:19:03 floss kernel: [ 0.273977] system 00:00: iomem range 0x100000-0x7ffeffff could not be reserved
Oct 25 09:19:03 floss kernel: [ 0.273985] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
Oct 25 09:19:03 floss kernel: [ 0.273994] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
Oct 25 09:19:03 floss kernel: [ 0.274013] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
Oct 25 09:19:03 floss kernel: [ 0.309242] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Oct 25 09:19:03 floss kernel: [ 0.309249] pci 0000:00:01.0: IO window: disabled
Oct 25 09:19:03 floss kernel: [ 0.309259] pci 0000:00:01.0: MEM window: 0xdc000000-0xddffffff
Oct 25 09:19:03 floss kernel: [ 0.309268] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xd7ffffff
Oct 25 09:19:03 floss kernel: [ 0.309291] pci 0000:00:01.0: setting latency timer to 64
Oct 25 09:19:03 floss kernel: [ 0.309303] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Oct 25 09:19:03 floss kernel: [ 0.309311] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Oct 25 09:19:03 floss kernel: [ 0.309319] pci_bus 0000:01: resource 1 mem: [0xdc000000-0xddffffff]
Oct 25 09:19:03 floss kernel: [ 0.309326] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
Oct 25 09:19:03 floss kernel: [ 0.309417] NET: Registered protocol family 2
Oct 25 09:19:03 floss kernel: [ 0.309666] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 25 09:19:03 floss kernel: [ 0.310632] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 25 09:19:03 floss kernel: [ 0.316440] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Oct 25 09:19:03 floss kernel: [ 0.319448] TCP: Hash tables configured (established 131072 bind 65536)
Oct 25 09:19:03 floss kernel: [ 0.319457] TCP reno registered
Oct 25 09:19:03 floss kernel: [ 0.319835] NET: Registered protocol family 1
Oct 25 09:19:03 floss kernel: [ 0.319898] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
Oct 25 09:19:03 floss kernel: [ 0.319911] pci 0000:00:07.0: Enabling VIA external APIC routing
Oct 25 09:19:03 floss kernel: [ 0.320047] pci 0000:01:00.0: Boot video device
Oct 25 09:19:03 floss kernel: [ 0.320213] Unpacking initramfs...
Oct 25 09:19:03 floss kernel: [ 0.927326] Freeing initrd memory: 8461k freed
Oct 25 09:19:03 floss kernel: [ 0.951051] audit: initializing netlink socket (disabled)
Oct 25 09:19:03 floss kernel: [ 0.951096] type=2000 audit(1319530688.948:1): initialized
Oct 25 09:19:03 floss kernel: [ 0.961738] highmem bounce pool size: 64 pages
Oct 25 09:19:03 floss kernel: [ 0.961753] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Oct 25 09:19:03 floss kernel: [ 0.966169] VFS: Disk quotas dquot_6.5.2
Oct 25 09:19:03 floss kernel: [ 0.966364] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 25 09:19:03 floss kernel: [ 0.966582] msgmni has been set to 1723
Oct 25 09:19:03 floss kernel: [ 0.967296] alg: No test for stdrng (krng)
Oct 25 09:19:03 floss kernel: [ 0.967392] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Oct 25 09:19:03 floss kernel: [ 0.967401] io scheduler noop registered
Oct 25 09:19:03 floss kernel: [ 0.967407] io scheduler anticipatory registered
Oct 25 09:19:03 floss kernel: [ 0.967412] io scheduler deadline registered
Oct 25 09:19:03 floss kernel: [ 0.967524] io scheduler cfq registered (default)
Oct 25 09:19:03 floss kernel: [ 0.968003] isapnp: Scanning for PnP cards...
Oct 25 09:19:03 floss kernel: [ 1.322212] isapnp: No Plug & Play device found
Oct 25 09:19:03 floss kernel: [ 1.326088] Linux agpgart interface v0.103
Oct 25 09:19:03 floss kernel: [ 1.326413] agpgart: Detected VIA Apollo Pro 133 chipset
Oct 25 09:19:03 floss kernel: [ 1.330428] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xd8000000
Oct 25 09:19:03 floss kernel: [ 1.330485] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 25 09:19:03 floss kernel: [ 1.330665] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 25 09:19:03 floss kernel: [ 1.330866] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 25 09:19:03 floss kernel: [ 1.331504] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 25 09:19:03 floss kernel: [ 1.331754] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 25 09:19:03 floss kernel: [ 1.332185] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 25 09:19:03 floss kernel: [ 1.332783] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 25 09:19:03 floss kernel: [ 1.332807] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 25 09:19:03 floss kernel: [ 1.333188] mice: PS/2 mouse device common for all mice
Oct 25 09:19:03 floss kernel: [ 1.333415] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Oct 25 09:19:03 floss kernel: [ 1.333475] rtc0: alarms up to one year, y3k, 242 bytes nvram
Oct 25 09:19:03 floss kernel: [ 1.333511] cpuidle: using governor ladder
Oct 25 09:19:03 floss kernel: [ 1.333517] cpuidle: using governor menu
Oct 25 09:19:03 floss kernel: [ 1.333528] No iBFT detected.
Oct 25 09:19:03 floss kernel: [ 1.334614] TCP cubic registered
Oct 25 09:19:03 floss kernel: [ 1.335021] NET: Registered protocol family 10
Oct 25 09:19:03 floss kernel: [ 1.337324] Mobile IPv6
Oct 25 09:19:03 floss kernel: [ 1.337335] NET: Registered protocol family 17
Oct 25 09:19:03 floss kernel: [ 1.337384] Using IPI No-Shortcut mode
Oct 25 09:19:03 floss kernel: [ 1.337623] PM: Resume from disk failed.
Oct 25 09:19:03 floss kernel: [ 1.337655] registered taskstats version 1
Oct 25 09:19:03 floss kernel: [ 1.338270] rtc_cmos 00:04: setting system clock to 2011-10-25 08:18:10 UTC (1319530690)
Oct 25 09:19:03 floss kernel: [ 1.338385] Initalizing network drop monitor service
Oct 25 09:19:03 floss kernel: [ 1.338469] Freeing unused kernel memory: 380k freed
Oct 25 09:19:03 floss kernel: [ 1.339335] Write protecting the kernel text: 2508k
Oct 25 09:19:03 floss kernel: [ 1.339397] Write protecting the kernel read-only data: 920k
Oct 25 09:19:03 floss kernel: [ 1.352925] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Oct 25 09:19:03 floss kernel: [ 1.393005] udev[56]: starting version 164
Oct 25 09:19:03 floss kernel: [ 1.698299] SCSI subsystem initialized
Oct 25 09:19:03 floss kernel: [ 1.711501] Uniform Multi-Platform E-IDE driver
Oct 25 09:19:03 floss kernel: [ 1.716905] initio 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 25 09:19:03 floss kernel: [ 1.768670] i91u: PCI Base=0xA000, IRQ=17, BIOS=0xFF000, SCSI ID=7
Oct 25 09:19:03 floss kernel: [ 1.768677] i91u: Reset SCSI Bus ...
Oct 25 09:19:03 floss kernel: [ 1.848032] usbcore: registered new interface driver usbfs
Oct 25 09:19:03 floss kernel: [ 1.848469] usbcore: registered new interface driver hub
Oct 25 09:19:03 floss kernel: [ 1.848964] usbcore: registered new device driver usb
Oct 25 09:19:03 floss kernel: [ 1.867393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 25 09:19:03 floss kernel: [ 1.875690] Floppy drive(s): fd0 is 1.44M
Oct 25 09:19:03 floss kernel: [ 1.889639] libata version 3.00 loaded.
Oct 25 09:19:03 floss kernel: [ 11.772014] IRQ 17/i91u: IRQF_DISABLED is not guaranteed on shared IRQs
Oct 25 09:19:03 floss kernel: [ 11.772132] scsi0 : Initio INI-9X00U/UW SCSI device driver
Oct 25 09:19:03 floss kernel: [ 11.772942] ehci_hcd 0000:00:0b.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
Oct 25 09:19:03 floss kernel: [ 11.773055] ehci_hcd 0000:00:0b.2: EHCI Host Controller
Oct 25 09:19:03 floss kernel: [ 11.773130] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
Oct 25 09:19:03 floss kernel: [ 11.791718] FDC 0 is a post-1991 82077
Oct 25 09:19:03 floss kernel: [ 11.797172] ehci_hcd 0000:00:0b.2: irq 19, io mem 0xdf004000
Oct 25 09:19:03 floss kernel: [ 11.809059] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00
Oct 25 09:19:03 floss kernel: [ 11.809143] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Oct 25 09:19:03 floss kernel: [ 11.809151] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 25 09:19:03 floss kernel: [ 11.809158] usb usb1: Product: EHCI Host Controller
Oct 25 09:19:03 floss kernel: [ 11.809164] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
Oct 25 09:19:03 floss kernel: [ 11.809170] usb usb1: SerialNumber: 0000:00:0b.2
Oct 25 09:19:03 floss kernel: [ 11.809417] usb usb1: configuration #1 chosen from 1 choice
Oct 25 09:19:03 floss kernel: [ 11.809503] hub 1-0:1.0: USB hub found
Oct 25 09:19:03 floss kernel: [ 11.809529] hub 1-0:1.0: 5 ports detected
Oct 25 09:19:03 floss kernel: [ 11.817442] hpt366: HPT370 chipset detected
Oct 25 09:19:03 floss kernel: [ 11.817462] hpt366 0000:00:0e.0: IDE controller (0x1103:0x0004 rev 0x03)
Oct 25 09:19:03 floss kernel: [ 11.817519] HPT366_IDE 0000:00:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 25 09:19:03 floss kernel: [ 11.817588] hpt366 0000:00:0e.0: no clock data saved by BIOS
Oct 25 09:19:03 floss kernel: [ 11.818649] uhci_hcd: USB Universal Host Controller Interface driver
Oct 25 09:19:03 floss kernel: [ 11.880492] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 25 09:19:03 floss kernel: [ 11.944705] hpt366 0000:00:0e.0: DPLL base: 48 MHz, f_CNT: 133, assuming 33 MHz PCI
Oct 25 09:19:03 floss kernel: [ 11.944712] hpt366 0000:00:0e.0: using 33 MHz PCI clock
Oct 25 09:19:03 floss kernel: [ 11.944826] hpt366 0000:00:0e.0: 100% native mode on irq 18
Oct 25 09:19:03 floss kernel: [ 11.944840] ide2: BM-DMA at 0xc000-0xc007
Oct 25 09:19:03 floss kernel: [ 11.944859] ide3: BM-DMA at 0xc008-0xc00f
Oct 25 09:19:03 floss kernel: [ 11.944874] Probing IDE interface ide2...
Oct 25 09:19:03 floss kernel: [ 12.121035] usb 1-2: new high speed USB device using ehci_hcd and address 2
Oct 25 09:19:03 floss kernel: [ 12.240398] hde: ST3200822A, ATA DISK drive
Oct 25 09:19:03 floss kernel: [ 12.252610] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101
Oct 25 09:19:03 floss kernel: [ 12.252618] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Oct 25 09:19:03 floss kernel: [ 12.252625] usb 1-2: Product: USB 2.0 Hub
Oct 25 09:19:03 floss kernel: [ 12.252887] usb 1-2: configuration #1 chosen from 1 choice
Oct 25 09:19:03 floss kernel: [ 12.253193] hub 1-2:1.0: USB hub found
Oct 25 09:19:03 floss kernel: [ 12.253376] hub 1-2:1.0: 4 ports detected
Oct 25 09:19:03 floss kernel: [ 12.532755] scsi 0:0:3:0: Processor HP C7670A 3925 PQ: 0 ANSI: 2
Oct 25 09:19:03 floss kernel: [ 12.548196] usb 1-2.4: new high speed USB device using ehci_hcd and address 5
Oct 25 09:19:03 floss kernel: [ 12.643648] usb 1-2.4: New USB device found, idVendor=058f, idProduct=6362
Oct 25 09:19:03 floss kernel: [ 12.643657] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 25 09:19:03 floss kernel: [ 12.643664] usb 1-2.4: Product: Mass Storage Device
Oct 25 09:19:03 floss kernel: [ 12.643669] usb 1-2.4: Manufacturer: Generic
Oct 25 09:19:03 floss kernel: [ 12.643675] usb 1-2.4: SerialNumber: 058F312D81B
Oct 25 09:19:03 floss kernel: [ 12.644909] usb 1-2.4: configuration #1 chosen from 1 choice
Oct 25 09:19:03 floss kernel: [ 12.673258] Initializing USB Mass Storage driver...
Oct 25 09:19:03 floss kernel: [ 12.673602] scsi1 : SCSI emulation for USB Mass Storage devices
Oct 25 09:19:03 floss kernel: [ 12.674029] usb-storage: device found at 5
Oct 25 09:19:03 floss kernel: [ 12.674038] usb-storage: waiting for device to settle before scanning
Oct 25 09:19:03 floss kernel: [ 12.674070] usbcore: registered new interface driver usb-storage
Oct 25 09:19:03 floss kernel: [ 12.674535] USB Mass Storage support registered.
Oct 25 09:19:03 floss kernel: [ 12.908147] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Oct 25 09:19:03 floss kernel: [ 12.908620] hde: UDMA/66 mode selected
Oct 25 09:19:03 floss kernel: [ 12.908908] Probing IDE interface ide3...
Oct 25 09:19:03 floss kernel: [ 13.038784] scsi 0:0:6:0: CD-ROM GENERIC CRD-BP4 4.28 PQ: 0 ANSI: 2
Oct 25 09:19:03 floss kernel: [ 13.065704] scsi 0:0:3:0: Attached scsi generic sg0 type 3
Oct 25 09:19:03 floss kernel: [ 13.065998] scsi 0:0:6:0: Attached scsi generic sg1 type 5
Oct 25 09:19:03 floss kernel: [ 13.082431] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Oct 25 09:19:03 floss kernel: [ 13.082441] Uniform CD-ROM driver Revision: 3.20
Oct 25 09:19:03 floss kernel: [ 13.083458] sr 0:0:6:0: Attached scsi CD-ROM sr0
Oct 25 09:19:03 floss kernel: [ 13.476223] ide2 at 0xb000-0xb007,0xb402 on irq 18
Oct 25 09:19:03 floss kernel: [ 13.476309] ide3 at 0xb800-0xb807,0xbc02 on irq 18
Oct 25 09:19:03 floss kernel: [ 13.476521] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 25 09:19:03 floss kernel: [ 13.476583] r8169 0000:00:0c.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Oct 25 09:19:03 floss kernel: [ 13.476674] r8169 0000:00:0c.0: (unregistered net_device): no PCI Express capability
Oct 25 09:19:03 floss kernel: [ 13.478605] r8169 0000:00:0c.0: eth0: RTL8169sb/8110sb at 0xf7f9e000, 00:06:4f:8b:a9:be, XID 10000000 IRQ 19
Oct 25 09:19:03 floss kernel: [ 13.479689] pata_via 0000:00:07.1: version 0.3.4
Oct 25 09:19:03 floss kernel: [ 13.483148] scsi2 : pata_via
Oct 25 09:19:03 floss kernel: [ 13.483644] scsi3 : pata_via
Oct 25 09:19:03 floss kernel: [ 13.483783] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x9000 irq 14
Oct 25 09:19:03 floss kernel: [ 13.483791] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x9008 irq 15
Oct 25 09:19:03 floss kernel: [ 13.484332] aic7xxx 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 25 09:19:03 floss kernel: [ 13.497331] ide-gd driver 1.18
Oct 25 09:19:03 floss kernel: [ 13.497430] hde: max request size: 512KiB
Oct 25 09:19:03 floss kernel: [ 13.668350] ata1.00: ATA-3: HITACHI_DK226A-32U, 00R0A0A1, max UDMA/33
Oct 25 09:19:03 floss kernel: [ 13.668360] ata1.00: 6332256 sectors, multi 0: LBA
Oct 25 09:19:03 floss kernel: [ 13.684378] ata1.00: configured for UDMA/33
Oct 25 09:19:03 floss kernel: [ 13.684674] scsi 2:0:0:0: Direct-Access ATA HITACHI_DK226A-3 00R0 PQ: 0 ANSI: 5
Oct 25 09:19:03 floss kernel: [ 13.685447] scsi 2:0:0:0: Attached scsi generic sg2 type 0
Oct 25 09:19:03 floss kernel: [ 13.697248] hde: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63
Oct 25 09:19:03 floss kernel: [ 13.697460] hde: cache flushes supported
Oct 25 09:19:03 floss kernel: [ 13.697642] hde: hde1 hde2 < hde5 hde6 hde7 hde8 >
Oct 25 09:19:03 floss kernel: [ 13.857360] ata2.00: ATA-3: HITACHI_DK226A-32, 00T0A0A0, max MWDMA2
Oct 25 09:19:03 floss kernel: [ 13.857369] ata2.00: 6332256 sectors, multi 0: LBA
Oct 25 09:19:03 floss kernel: [ 13.872383] ata2.00: configured for MWDMA2
Oct 25 09:19:03 floss kernel: [ 13.872689] scsi 3:0:0:0: Direct-Access ATA HITACHI_DK226A-3 00T0 PQ: 0 ANSI: 5
Oct 25 09:19:03 floss kernel: [ 13.873044] scsi 3:0:0:0: Attached scsi generic sg3 type 0
Oct 25 09:19:03 floss kernel: [ 17.672954] usb-storage: device scan complete
Oct 25 09:19:03 floss kernel: [ 17.673795] scsi 1:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
Oct 25 09:19:03 floss kernel: [ 17.674392] scsi 1:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
Oct 25 09:19:03 floss kernel: [ 17.675010] scsi 1:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
Oct 25 09:19:03 floss kernel: [ 17.675633] scsi 1:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
Oct 25 09:19:03 floss kernel: [ 17.677436] scsi 1:0:0:0: Attached scsi generic sg4 type 0
Oct 25 09:19:03 floss kernel: [ 17.677769] scsi 1:0:0:1: Attached scsi generic sg5 type 0
Oct 25 09:19:03 floss kernel: [ 17.678023] scsi 1:0:0:2: Attached scsi generic sg6 type 0
Oct 25 09:19:03 floss kernel: [ 17.678290] scsi 1:0:0:3: Attached scsi generic sg7 type 0
Oct 25 09:19:03 floss kernel: [ 17.708967] sd 2:0:0:0: [sda] 6332256 512-byte logical blocks: (3.24 GB/3.01 GiB)
Oct 25 09:19:03 floss kernel: [ 17.709157] sd 2:0:0:0: [sda] Write Protect is off
Oct 25 09:19:03 floss kernel: [ 17.709165] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 25 09:19:03 floss kernel: [ 17.709233] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 25 09:19:03 floss kernel: [ 17.709692] sda:
Oct 25 09:19:03 floss kernel: [ 17.710862] sd 3:0:0:0: [sdb] 6332256 512-byte logical blocks: (3.24 GB/3.01 GiB)
Oct 25 09:19:03 floss kernel: [ 17.711578] sd 3:0:0:0: [sdb] Write Protect is off
Oct 25 09:19:03 floss kernel: [ 17.711588] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Oct 25 09:19:03 floss kernel: [ 17.711656] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 25 09:19:03 floss kernel: [ 17.712217] sdb:
Oct 25 09:19:03 floss kernel: [ 17.718040] sd 1:0:0:0: [sdc] Attached SCSI removable disk
Oct 25 09:19:03 floss kernel: [ 17.718804] sd 1:0:0:1: [sdd] Attached SCSI removable disk
Oct 25 09:19:03 floss kernel: [ 17.719503] sd 1:0:0:3: [sdf] Attached SCSI removable disk
Oct 25 09:19:03 floss kernel: [ 17.720214] sd 1:0:0:2: [sde] Attached SCSI removable disk
Oct 25 09:19:03 floss kernel: [ 17.817233] sda1 sda2 sda3
Oct 25 09:19:03 floss kernel: [ 17.818369] sd 2:0:0:0: [sda] Attached SCSI disk
Oct 25 09:19:03 floss kernel: [ 17.833268] sdb1
Oct 25 09:19:03 floss kernel: [ 17.834188] sd 3:0:0:0: [sdb] Attached SCSI disk
Oct 25 09:19:03 floss kernel: [ 28.696041] scsi4 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
Oct 25 09:19:03 floss kernel: [ 28.696045] <Adaptec 29160N Ultra160 SCSI adapter>
Oct 25 09:19:03 floss kernel: [ 28.696048] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Oct 25 09:19:03 floss kernel: [ 28.696051]
Oct 25 09:19:03 floss kernel: [ 28.698321] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
Oct 25 09:19:03 floss kernel: [ 28.698349] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
Oct 25 09:19:03 floss kernel: [ 28.698360] uhci_hcd 0000:00:07.2: VIA VLink IRQ fixup, from 9 to 10
Oct 25 09:19:03 floss kernel: [ 28.698404] uhci_hcd 0000:00:07.2: UHCI Host Controller
Oct 25 09:19:03 floss kernel: [ 28.698547] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
Oct 25 09:19:03 floss kernel: [ 28.698621] uhci_hcd 0000:00:07.2: irq 10, io base 0x00009400
Oct 25 09:19:03 floss kernel: [ 28.698760] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Oct 25 09:19:03 floss kernel: [ 28.698768] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 25 09:19:03 floss kernel: [ 28.698775] usb usb2: Product: UHCI Host Controller
Oct 25 09:19:03 floss kernel: [ 28.698781] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 25 09:19:03 floss kernel: [ 28.698787] usb usb2: SerialNumber: 0000:00:07.2
Oct 25 09:19:03 floss kernel: [ 28.699076] usb usb2: configuration #1 chosen from 1 choice
Oct 25 09:19:03 floss kernel: [ 28.699789] scsi 4:0:0:0: Direct-Access QUANTUM ATLAS10K2-TY184L DA40 PQ: 0 ANSI: 3
Oct 25 09:19:03 floss kernel: [ 28.699827] scsi4:A:0:0: Tagged Queuing enabled. Depth 8
Oct 25 09:19:03 floss kernel: [ 28.699872] scsi target4:0:0: Beginning Domain Validation
Oct 25 09:19:03 floss kernel: [ 28.700100] hub 2-0:1.0: USB hub found
Oct 25 09:19:03 floss kernel: [ 28.700135] hub 2-0:1.0: 2 ports detected
Oct 25 09:19:03 floss kernel: [ 28.700411] ohci_hcd 0000:00:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 25 09:19:03 floss kernel: [ 28.700467] ohci_hcd 0000:00:0b.0: OHCI Host Controller
Oct 25 09:19:03 floss kernel: [ 28.700508] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 3
Oct 25 09:19:03 floss kernel: [ 28.700592] ohci_hcd 0000:00:0b.0: irq 17, io mem 0xdf002000
Oct 25 09:19:03 floss kernel: [ 28.701739] scsi target4:0:0: wide asynchronous
Oct 25 09:19:03 floss kernel: [ 28.703049] scsi target4:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
Oct 25 09:19:03 floss kernel: [ 28.707054] scsi target4:0:0: Ending Domain Validation
Oct 25 09:19:03 floss kernel: [ 28.707919] scsi 4:0:1:0: Direct-Access QUANTUM ATLAS10K2-TY184L DDD6 PQ: 0 ANSI: 3
Oct 25 09:19:03 floss kernel: [ 28.707935] scsi4:A:1:0: Tagged Queuing enabled. Depth 8
Oct 25 09:19:03 floss kernel: [ 28.707956] scsi target4:0:1: Beginning Domain Validation
Oct 25 09:19:03 floss kernel: [ 28.709641] scsi target4:0:1: wide asynchronous
Oct 25 09:19:03 floss kernel: [ 28.710963] scsi target4:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
Oct 25 09:19:03 floss kernel: [ 28.714988] scsi target4:0:1: Ending Domain Validation
Oct 25 09:19:03 floss kernel: [ 28.785840] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Oct 25 09:19:03 floss kernel: [ 28.785848] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 25 09:19:03 floss kernel: [ 28.785856] usb usb3: Product: OHCI Host Controller
Oct 25 09:19:03 floss kernel: [ 28.785861] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
Oct 25 09:19:03 floss kernel: [ 28.785867] usb usb3: SerialNumber: 0000:00:0b.0
Oct 25 09:19:03 floss kernel: [ 28.786375] usb usb3: configuration #1 chosen from 1 choice
Oct 25 09:19:03 floss kernel: [ 28.786566] hub 3-0:1.0: USB hub found
Oct 25 09:19:03 floss kernel: [ 28.786593] hub 3-0:1.0: 3 ports detected
Oct 25 09:19:03 floss kernel: [ 28.787566] uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
Oct 25 09:19:03 floss kernel: [ 28.787583] uhci_hcd 0000:00:07.3: VIA VLink IRQ fixup, from 9 to 10
Oct 25 09:19:03 floss kernel: [ 28.787631] uhci_hcd 0000:00:07.3: UHCI Host Controller
Oct 25 09:19:03 floss kernel: [ 28.787672] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 4
Oct 25 09:19:03 floss kernel: [ 28.787728] uhci_hcd 0000:00:07.3: irq 10, io base 0x00009800
Oct 25 09:19:03 floss kernel: [ 28.787864] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Oct 25 09:19:03 floss kernel: [ 28.787872] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 25 09:19:03 floss kernel: [ 28.787879] usb usb4: Product: UHCI Host Controller
Oct 25 09:19:03 floss kernel: [ 28.787885] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
Oct 25 09:19:03 floss kernel: [ 28.787891] usb usb4: SerialNumber: 0000:00:07.3
Oct 25 09:19:03 floss kernel: [ 28.789676] usb usb4: configuration #1 chosen from 1 choice
Oct 25 09:19:03 floss kernel: [ 28.789842] hub 4-0:1.0: USB hub found
Oct 25 09:19:03 floss kernel: [ 28.789877] hub 4-0:1.0: 2 ports detected
Oct 25 09:19:03 floss kernel: [ 28.790511] ohci_hcd 0000:00:0b.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Oct 25 09:19:03 floss kernel: [ 28.790580] ohci_hcd 0000:00:0b.1: OHCI Host Controller
Oct 25 09:19:03 floss kernel: [ 28.790637] ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 5
Oct 25 09:19:03 floss kernel: [ 28.791172] ohci_hcd 0000:00:0b.1: irq 16, io mem 0xdf003000
Oct 25 09:19:03 floss kernel: [ 28.874862] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Oct 25 09:19:03 floss kernel: [ 28.874873] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 25 09:19:03 floss kernel: [ 28.874880] usb usb5: Product: OHCI Host Controller
Oct 25 09:19:03 floss kernel: [ 28.874885] usb usb5: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
Oct 25 09:19:03 floss kernel: [ 28.874891] usb usb5: SerialNumber: 0000:00:0b.1
Oct 25 09:19:03 floss kernel: [ 28.875410] usb usb5: configuration #1 chosen from 1 choice
Oct 25 09:19:03 floss kernel: [ 28.875610] hub 5-0:1.0: USB hub found
Oct 25 09:19:03 floss kernel: [ 28.875637] hub 5-0:1.0: 2 ports detected
Oct 25 09:19:03 floss kernel: [ 29.544041] usb 3-3: new full speed USB device using ohci_hcd and address 2
Oct 25 09:19:03 floss kernel: [ 29.748152] scsi 4:0:6:0: CD-ROM PIONEER DVD-ROM DVD-304 1.03 PQ: 0 ANSI: 2
Oct 25 09:19:03 floss kernel: [ 29.748184] scsi target4:0:6: Beginning Domain Validation
Oct 25 09:19:03 floss kernel: [ 29.751421] scsi target4:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
Oct 25 09:19:03 floss kernel: [ 29.753487] scsi target4:0:6: Domain Validation skipping write tests
Oct 25 09:19:03 floss kernel: [ 29.753494] scsi target4:0:6: Ending Domain Validation
Oct 25 09:19:03 floss kernel: [ 29.760821] usb 3-3: New USB device found, idVendor=04e8, idProduct=323a
Oct 25 09:19:03 floss kernel: [ 29.760831] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 25 09:19:03 floss kernel: [ 29.760838] usb 3-3: Product: Samsung ML-1710
Oct 25 09:19:03 floss kernel: [ 29.760843] usb 3-3: Manufacturer: Samsung Electronics Co., Ltd.
Oct 25 09:19:03 floss kernel: [ 29.760849] usb 3-3: SerialNumber: 2237BAAW523034.0
Oct 25 09:19:03 floss kernel: [ 29.761149] usb 3-3: configuration #1 chosen from 1 choice
Oct 25 09:19:03 floss kernel: [ 30.072037] usb 5-2: new full speed USB device using ohci_hcd and address 2
Oct 25 09:19:03 floss kernel: [ 30.152753] PM: Starting manual resume from disk
Oct 25 09:19:03 floss kernel: [ 30.152765] PM: Resume from partition 33:1
Oct 25 09:19:03 floss kernel: [ 30.152770] PM: Checking hibernation image.
Oct 25 09:19:03 floss kernel: [ 30.157872] PM: Error -22 checking image file
Oct 25 09:19:03 floss kernel: [ 30.157877] PM: Resume from disk failed.
Oct 25 09:19:03 floss kernel: [ 30.274064] kjournald starting. Commit interval 5 seconds
Oct 25 09:19:03 floss kernel: [ 30.274097] EXT3-fs: mounted filesystem with ordered data mode.
Oct 25 09:19:03 floss kernel: [ 30.289776] usb 5-2: New USB device found, idVendor=04a9, idProduct=1099
Oct 25 09:19:03 floss kernel: [ 30.289788] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct 25 09:19:03 floss kernel: [ 30.289796] usb 5-2: Product: iP8500
Oct 25 09:19:03 floss kernel: [ 30.289801] usb 5-2: Manufacturer: Canon
Oct 25 09:19:03 floss kernel: [ 30.289806] usb 5-2: SerialNumber: HGIGJG
Oct 25 09:19:03 floss kernel: [ 30.290176] usb 5-2: configuration #1 chosen from 1 choice
Oct 25 09:19:03 floss kernel: [ 31.806892] sd 4:0:0:0: Attached scsi generic sg8 type 0
Oct 25 09:19:03 floss kernel: [ 31.807130] sd 4:0:0:0: [sdg] 35860910 512-byte logical blocks: (18.3 GB/17.0 GiB)
Oct 25 09:19:03 floss kernel: [ 31.807428] sd 4:0:1:0: Attached scsi generic sg9 type 0
Oct 25 09:19:03 floss kernel: [ 31.807647] sd 4:0:1:0: [sdh] 35860910 512-byte logical blocks: (18.3 GB/17.0 GiB)
Oct 25 09:19:03 floss kernel: [ 31.809086] sd 4:0:0:0: [sdg] Write Protect is off
Oct 25 09:19:03 floss kernel: [ 31.809095] sd 4:0:0:0: [sdg] Mode Sense: f5 00 10 08
Oct 25 09:19:03 floss kernel: [ 31.809541] sd 4:0:1:0: [sdh] Write Protect is off
Oct 25 09:19:03 floss kernel: [ 31.809548] sd 4:0:1:0: [sdh] Mode Sense: f5 00 10 08
Oct 25 09:19:03 floss kernel: [ 31.812113] sd 4:0:0:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
Oct 25 09:19:03 floss kernel: [ 31.812807] sr1: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
Oct 25 09:19:03 floss kernel: [ 31.812971] sd 4:0:1:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA
Oct 25 09:19:03 floss kernel: [ 31.813148] sr 4:0:6:0: Attached scsi CD-ROM sr1
Oct 25 09:19:03 floss kernel: [ 31.813336] sr 4:0:6:0: Attached scsi generic sg10 type 5
Oct 25 09:19:03 floss kernel: [ 31.816284] sdg: sdg1
Oct 25 09:19:03 floss kernel: [ 31.816958] sdh: sdh1 sdh2
Oct 25 09:19:03 floss kernel: [ 31.820458] sd 4:0:0:0: [sdg] Attached SCSI disk
Oct 25 09:19:03 floss kernel: [ 31.821061] sd 4:0:1:0: [sdh] Attached SCSI disk
Oct 25 09:19:03 floss kernel: [ 35.387853] udev[367]: starting version 164
Oct 25 09:19:03 floss kernel: [ 36.188339] udev[407]: renamed network interface eth0 to eth1
Oct 25 09:19:03 floss kernel: [ 36.588708] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 25 09:19:03 floss kernel: [ 36.784833] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x323A
Oct 25 09:19:03 floss kernel: [ 36.793230] input: PC Speaker as /devices/platform/pcspkr/input/input1
Oct 25 09:19:03 floss kernel: [ 36.794965] usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1099
Oct 25 09:19:03 floss kernel: [ 36.795039] usbcore: registered new interface driver usblp
Oct 25 09:19:03 floss kernel: [ 36.860661] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Oct 25 09:19:03 floss kernel: [ 36.860860] ACPI: Power Button [PWRB]
Oct 25 09:19:03 floss kernel: [ 36.861149] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Oct 25 09:19:03 floss kernel: [ 36.861229] ACPI: Power Button [PWRF]
Oct 25 09:19:03 floss kernel: [ 37.083931] gameport: EMU10K1 is pci0000:00:0d.1/gameport0, io 0xac00, speed 1325kHz
Oct 25 09:19:03 floss kernel: [ 37.230413] processor LNXCPU:00: registered as cooling_device0
Oct 25 09:19:03 floss kernel: [ 37.232144] processor LNXCPU:01: registered as cooling_device1
Oct 25 09:19:03 floss kernel: [ 37.238881] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 25 09:19:03 floss kernel: [ 37.655381] parport_pc: VIA 686A/8231 detected
Oct 25 09:19:03 floss kernel: [ 37.655393] parport_pc: probing current configuration
Oct 25 09:19:03 floss kernel: [ 37.655418] parport_pc: Current parallel port base: 0x378
Oct 25 09:19:03 floss kernel: [ 37.655513] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Oct 25 09:19:03 floss kernel: [ 37.753215] parport_pc: VIA parallel port: io=0x378, irq=7
Oct 25 09:19:03 floss kernel: [ 37.933378] input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
Oct 25 09:19:03 floss kernel: [ 40.233329] EMU10K1_Audigy 0000:00:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 25 09:19:03 floss kernel: [ 42.449753] Adding 5116660k swap on /dev/hde1. Priority:-1 extents:1 across:5116660k
Oct 25 09:19:03 floss kernel: [ 43.446715] EXT3 FS on sda2, internal journal
Oct 25 09:19:03 floss kernel: [ 43.862317] loop: module loaded
Oct 25 09:19:03 floss kernel: [ 46.778388] kjournald starting. Commit interval 5 seconds
Oct 25 09:19:03 floss kernel: [ 46.778787] EXT3 FS on sdh2, internal journal
Oct 25 09:19:03 floss kernel: [ 46.778801] EXT3-fs: mounted filesystem with ordered data mode.
Oct 25 09:19:03 floss kernel: [ 47.053907] kjournald starting. Commit interval 5 seconds
Oct 25 09:19:03 floss kernel: [ 47.056225] EXT3 FS on sda3, internal journal
Oct 25 09:19:03 floss kernel: [ 47.056240] EXT3-fs: mounted filesystem with ordered data mode.
Oct 25 09:19:03 floss kernel: [ 47.072526] kjournald starting. Commit interval 5 seconds
Oct 25 09:19:03 floss kernel: [ 47.072905] EXT3 FS on sdh1, internal journal
Oct 25 09:19:03 floss kernel: [ 47.072920] EXT3-fs: mounted filesystem with ordered data mode.
Oct 25 09:19:03 floss kernel: [ 47.084753] kjournald starting. Commit interval 5 seconds
Oct 25 09:19:03 floss kernel: [ 47.085141] EXT3 FS on sdg1, internal journal
Oct 25 09:19:03 floss kernel: [ 47.085155] EXT3-fs: mounted filesystem with ordered data mode.
Oct 25 09:19:03 floss kernel: [ 47.133228] kjournald starting. Commit interval 5 seconds
Oct 25 09:19:03 floss kernel: [ 47.133500] EXT3 FS on hde5, internal journal
Oct 25 09:19:03 floss kernel: [ 47.133513] EXT3-fs: mounted filesystem with ordered data mode.
Oct 25 09:19:03 floss kernel: [ 47.231196] kjournald starting. Commit interval 5 seconds
Oct 25 09:19:03 floss kernel: [ 47.231450] EXT3 FS on hde7, internal journal
Oct 25 09:19:03 floss kernel: [ 47.231461] EXT3-fs: mounted filesystem with ordered data mode.
Oct 25 09:19:03 floss kernel: [ 47.320027] kjournald starting. Commit interval 5 seconds
Oct 25 09:19:03 floss kernel: [ 47.320313] EXT3 FS on hde8, internal journal
Oct 25 09:19:03 floss kernel: [ 47.320329] EXT3-fs: mounted filesystem with ordered data mode.
Oct 25 09:19:03 floss kernel: [ 50.308448] fuse init (API version 7.13)
Oct 25 09:19:03 floss kernel: [ 51.220954] RPC: Registered udp transport module.
Oct 25 09:19:03 floss kernel: [ 51.220963] RPC: Registered tcp transport module.
Oct 25 09:19:03 floss kernel: [ 51.220968] RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 25 09:19:03 floss kernel: [ 51.858324] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Oct 25 09:19:03 floss kernel: [ 51.937609] svc: failed to register lockdv1 RPC service (errno 97).
Oct 25 09:19:03 floss kernel: [ 51.941176] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Oct 25 09:19:03 floss kernel: [ 51.949580] NFSD: starting 90-second grace period
Oct 25 09:19:03 floss kernel: [ 53.672943] r8169 0000:00:0c.0: eth1: link down
Oct 25 09:19:03 floss kernel: [ 53.674192] ADDRCONF(NETDEV_UP): eth1: link is not ready
Oct 25 09:19:04 floss kernel: [ 55.454467] r8169 0000:00:0c.0: eth1: link up
Oct 25 09:19:04 floss kernel: [ 55.455333] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Oct 25 09:19:04 floss kernel: [ 55.597355] lp0: using parport0 (interrupt-driven).
Oct 25 09:19:04 floss kernel: [ 55.658891] ppdev: user-space parallel port driver
Oct 25 09:19:06 floss kernel: [ 57.019519] [drm] Initialized drm 1.1.0 20060810
Oct 25 09:19:06 floss kernel: [ 57.415329] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 25 09:19:06 floss kernel: [ 57.431803] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x015000a4)
Oct 25 09:19:06 floss kernel: [ 57.432103] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
Oct 25 09:19:06 floss kernel: [ 57.551769] [drm] nouveau 0000:01:00.0: ... appears to be valid
Oct 25 09:19:06 floss kernel: [ 57.552244] [drm] nouveau 0000:01:00.0: BMP BIOS found
Oct 25 09:19:06 floss kernel: [ 57.552252] [drm] nouveau 0000:01:00.0: BMP version 5.17
Oct 25 09:19:06 floss kernel: [ 57.552260] [drm] nouveau 0000:01:00.0: Bios version 03.15.00.11
Oct 25 09:19:06 floss kernel: [ 57.552269] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 1.2
Oct 25 09:19:06 floss kernel: [ 57.552276] [drm] nouveau 0000:01:00.0: No useful information in BIOS output table; adding all possible outputs
Oct 25 09:19:06 floss kernel: [ 57.552284] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 1
Oct 25 09:19:06 floss kernel: [ 57.557515] [drm] nouveau 0000:01:00.0: No TV encoders found.
Oct 25 09:19:06 floss kernel: [ 57.558155] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x07D4
Oct 25 09:19:06 floss kernel: [ 57.558177] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x0E4A
Oct 25 09:19:06 floss kernel: [ 57.558190] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x07EF
Oct 25 09:19:06 floss kernel: [ 57.558218] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x0DF1
Oct 25 09:19:06 floss kernel: [ 57.558232] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x086C
Oct 25 09:19:06 floss kernel: [ 57.558241] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0x095E
Oct 25 09:19:06 floss kernel: [ 57.558269] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0x0895
Oct 25 09:19:06 floss kernel: [ 57.558289] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0x08F9
Oct 25 09:19:06 floss kernel: [ 57.570717] [TTM] Zone kernel: Available graphics memory: 441442 kiB.
Oct 25 09:19:06 floss kernel: [ 57.570724] [TTM] Zone highmem: Available graphics memory: 1037382 kiB.
Oct 25 09:19:06 floss kernel: [ 57.570752] [drm] nouveau 0000:01:00.0: 64 MiB VRAM
Oct 25 09:19:06 floss kernel: [ 57.570874] agpgart-via 0000:00:00.0: AGP 2.0 bridge
Oct 25 09:19:06 floss kernel: [ 57.570905] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
Oct 25 09:19:06 floss kernel: [ 57.570989] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
Oct 25 09:19:06 floss kernel: [ 57.570998] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
Oct 25 09:19:06 floss kernel: [ 57.571398] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
Oct 25 09:19:06 floss kernel: [ 57.575021] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
Oct 25 09:19:06 floss kernel: [ 57.575051] [drm] nouveau 0000:01:00.0: Saving VGA fonts
Oct 25 09:19:06 floss kernel: [ 57.604144] [drm] nouveau 0000:01:00.0: Detected a VGA connector
Oct 25 09:19:06 floss kernel: [ 57.606106] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
Oct 25 09:19:06 floss kernel: [ 57.717427] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x45000, bo f5eea400
Oct 25 09:19:06 floss kernel: [ 57.718090] Console: switching to colour frame buffer device 210x65
Oct 25 09:19:06 floss kernel: [ 57.718114] fb0: nouveaufb frame buffer device
Oct 25 09:19:06 floss kernel: [ 57.718120] registered panic notifier
Oct 25 09:19:06 floss kernel: [ 57.718136] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
Oct 25 09:19:07 floss kernel: [ 57.971608] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
Oct 25 09:19:07 floss kernel: [ 57.975106] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
Oct 25 09:19:08 floss kernel: [ 58.890289] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
Oct 25 09:19:08 floss kernel: [ 58.890308] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output @
Oct 25 09:19:10 floss kernel: [ 61.452493] vboxdrv: Found 2 processor cores.
Oct 25 09:19:10 floss kernel: [ 61.455337] vboxdrv: fAsync=0 offMin=0x36a offMax=0x10b7
Oct 25 09:19:10 floss kernel: [ 61.457524] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Oct 25 09:19:10 floss kernel: [ 61.457536] vboxdrv: Successfully loaded version 4.0.14 (interface 0x00180000).
Oct 25 09:19:15 floss kernel: [ 66.401015] eth1: no IPv6 routers present
Oct 25 09:19:33 floss kernel: [ 83.925685] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
Oct 25 09:19:33 floss kernel: [ 83.929738] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
Oct 25 09:19:33 floss kernel: [ 83.934821] thunderbird-bin[2000]: segfault at b495ab8c ip b4d7f7cd sp bfa34970 error 7 in libdrm_nouveau.so.1.0.0[b4d7d000+4000]
Oct 25 09:19:33 floss kernel: [ 83.936742] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 2
Oct 25 09:23:49 floss kernel: [ 341.968394] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
Oct 25 09:23:49 floss kernel: [ 341.973337] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
Oct 25 09:23:49 floss kernel: [ 341.978420] firefox-bin[2080]: segfault at b4be9b8c ip b4bc77cd sp bfc4caa0 error 7 in libdrm_nouveau.so.1.0.0[b4bc5000+4000]
Oct 25 09:23:49 floss kernel: [ 341.980328] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 2
Oct 25 10:43:37 floss kernel: [ 5130.617214] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
Oct 25 10:43:38 floss kernel: [ 5130.622214] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
Oct 25 10:43:38 floss kernel: [ 5130.628127] thunderbird-bin[6024]: segfault at b4a5ab8c ip b4e5f7cd sp bf8c9380 error 7 in libdrm_nouveau.so.1.0.0[b4e5d000+4000]
Oct 25 10:43:38 floss kernel: [ 5130.629835] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 2
Oct 25 11:13:36 floss kernel: [ 6928.676993] r8169 0000:00:0c.0: eth1: link down
Oct 25 11:13:37 floss kernel: [ 6930.547649] r8169 0000:00:0c.0: eth1: link up
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.29-dsa-ia32 i686 Debian
Current Operating System: Linux floss 2.6.32-5-686 #1 SMP Mon Oct 3 04:15:24 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=54a7949e-7b4c-4e7c-aff4-661f92a67b4a ro scsi=probe quiet
Build Date: 19 February 2011 02:37:36PM
xorg-server 2:1.7.7-13 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 25 09:19:05 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81ecca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0150:14af:7008 nVidia Corporation NV15 [GeForce2 GTS/Pro] rev 164, Mem @ 0xdc000000/16777216, 0xd0000000/134217728, BIOS @ 0x????????/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nouveau"
(II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.15
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU driver Date: Tue Mar 16 13:08:37 2010 +1000
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) Primary Device is: PCI 01@00:00:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] nouveau interface version: 0.0.15
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(--) NOUVEAU(0): Chipset: "NVIDIA NV15"
(==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(==) NOUVEAU(0): Using HW cursor
(II) NOUVEAU(0): Output VGA-1 using monitor section Monitor0
(II) NOUVEAU(0): EDID for output VGA-1
(II) NOUVEAU(0): Manufacturer: SAM Model: 301 Serial#: 1346712112
(II) NOUVEAU(0): Year: 2008 Week: 8
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 46 vert.: 30
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.651 redY: 0.333 greenX: 0.277 greenY: 0.614
(II) NOUVEAU(0): blueX: 0.145 blueY: 0.082 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 119.0 MHz Image Size: 459 x 296 mm
(II) NOUVEAU(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: H9XQ211255
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d010330324550
(II) NOUVEAU(0): 081201030e2e1e782ad105a655479d25
(II) NOUVEAU(0): 155054bfef80b30081808140714f0101
(II) NOUVEAU(0): 0101010101017c2e90a0601a1e403020
(II) NOUVEAU(0): 3600cb281100001a000000fd00384b1e
(II) NOUVEAU(0): 510e000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 00483958513231313235350a2020006b
(II) NOUVEAU(0): EDID vendor "SAM", prod id 769
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Printing probed modes for output VGA-1
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Output VGA-1 connected
(II) NOUVEAU(0): Using exact sizes for initial modes
(II) NOUVEAU(0): Output VGA-1 using initial mode 1680x1050
(II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(--) NOUVEAU(0): Virtual size is 1680x1050 (pitch 1728)
(**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
(II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(**) NOUVEAU(0): Display dimensions: (460, 300) mm
(**) NOUVEAU(0): DPI set to (92, 88)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) Depth 24 pixmap format is 32 bpp
(II) NOUVEAU(0): Opened GPU channel 1
(II) NOUVEAU(0): [DRI2] Setup complete
(II) NOUVEAU(0): GART: 64MiB available
(II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): NVEnterVT is called.
(**) NOUVEAU(0): DPMS enabled
(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/nouveau_vieux_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) NOUVEAU(0): Setting screen physical size to 444 x 277
resize called 1680 1050
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device PS2++ Logitech Wheel Mouse (/dev/input/event4)
(**) PS2++ Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
(**) PS2++ Logitech Wheel Mouse: always reports core events
(**) PS2++ Logitech Wheel Mouse: Device: "/dev/input/event4"
(II) PS2++ Logitech Wheel Mouse: Found 3 mouse buttons
(II) PS2++ Logitech Wheel Mouse: Found scroll wheel(s)
(II) PS2++ Logitech Wheel Mouse: Found relative axes
(II) PS2++ Logitech Wheel Mouse: Found x and y relative axes
(II) PS2++ Logitech Wheel Mouse: Configuring as mouse
(**) PS2++ Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) PS2++ Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS2++ Logitech Wheel Mouse" (type: MOUSE)
(II) PS2++ Logitech Wheel Mouse: initialized for relative axes.
(II) config/udev: Adding input device PS2++ Logitech Wheel Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) NOUVEAU(0): EDID vendor "SAM", prod id 769
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): EDID vendor "SAM", prod id 769
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): EDID vendor "SAM", prod id 769
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
Reply to: