Bug#634082: xserver-xorg-video-nouveau: X crashes with an assertion failure on VT switch with HW_Cursor disabled
Package: xserver-xorg-video-nouveau
Version: 1:0.0.16+git20110411+8378443-1+b1
Severity: normal
If I disable HW_Cursor while using the nouveau driver, X will allow me to
switch to a text console normally; however, if I then switch back to X,
X crashes hard, locking keyboard input and apparently turning off the video
signal. The computer is still running and accepts SSH logins; if I run xinit
by remote, it will reactivate video and keyboard.
Running xinit 2>stderr.log , switching to a text console, and then switching
back to X will put the following in stderr.log:
---------------------
X.Org X Server 1.10.2.902 (1.10.3 RC 2)
Release Date: 2011-07-01
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.39-2-amd64 x86_64 Debian
Current Operating System: Linux transfinity 2.6.39-2-amd64 #1 SMP Tue Jul 5 02:51:22 UTC 2011 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-amd64 root=UUID=20a44ba6-981d-4526-a108-a8054b8cd263 ro quiet
Build Date: 02 July 2011 10:05:17AM
xorg-server 2:1.10.2.902-1 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 15 23:47:11 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "v4l" (module does not exist, 0)
resize called 1680 1050
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
X: ../../../../include/privates.h:116: dixGetPrivateAddr: Assertion `key->initialized' failed.
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
xinit: connection to X server lost
------------------------------
My video controller is an on-motherboard nvidia; lspci shows it as:
00:05.0 VGA compatible controller: nVidia Corporation C51G [GeForce 6100] (rev a2) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device 0222
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: nouveau
-------------------------------
The lockup does not happen if I remove the 'Option "HW_Cursor" off' line
from xorg.conf.
(Unfortunately, disabling HW_Cursor seems to be the recommended workaround
for a (probably-unrelated) X server bug where the cursor becomes invisible.)
IMO, the best thing to do would be to restore the original console
settings after an assertion failure, the same way X does after
control-alt-backspace. If you wish, I can attempt to put together a
patch that does so.
Note also that the dmesg entry in the auto-included data below includes a
successful X start afterwards with a different config file.
The offending xorg.conf is:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "drm"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "dvorak"
#Option "XkbLayout" "us"
#Option "XkbVariant" "dvorak"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
EndSection
#Section "Device"
# Identifier "Generic Video Card"
# Driver "intel"
# BusID "PCI:0:2:0"
# VideoRam 128000
# Option "Monitor-VGA" "Generic Monitor"
# Option "Monitor-LVDS" "Generic Monitor"
# #Option "PreferredMode" "1600x1200_60.00"
#EndSection
#Section "Device"
# Identifier "Goodwill Radeon"
#EndSection
Section "Device"
Identifier "GeForce 4"
Driver "nouveau"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
#DisplaySize 383 293
Option "DPMS"
#HorizSync 30-68
#VertRefresh 50-125
Modeline "1920x1440" 157.18 1920 1984 2096 2456 1440 1442 1451 1516
Modeline "1920x1440" 152.27 1920 1984 2096 2456 1440 1442 1451 1516 # 152 MHz, 62.0 kHz, 40.9 Hz
Modeline "1792x1344" 142.35 1792 1848 1960 2296 1344 1346 1354 1415 # 142 MHz, 62.0 kHz, 43.8 Hz
Modeline "1600x1200" 131.07 1600 1656 1768 2048 1200 1202 1209 1263 # 131 MHz, 64.0 kHz, 50.7 Hz
Modeline "1440x1280" 117.76 1440 1488 1600 1840 1280 1282 1290 1347 # 118 MHz, 64.0 kHz, 47.5 Hz
Modeline "1680x1050_60.00" 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -HSync +Vsync
EndSection
Section "Screen"
Option "HW_Cursor" "off"
#Option "sw_cursor"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
#Modes "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
#Modes "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
#Modes "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
#Modes "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
#Modes "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
#Modes "1920x1440" - Boom?
#Modes "1856x1392"
#Modes "1792x1344" - Boom.
Modes "1680x1050_60.00" "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1280" "1600x1200" "1440x1280" "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
#Modes "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
Option "DontZap" "Off"
Option "DontZoom" "Off"
EndSection
--------------------
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Dec 1 2010 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1957728 Jul 2 03:07 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:05.0 VGA compatible controller [0300]: nVidia Corporation C51G [GeForce 6100] [10de:0242] (rev a2)
Xorg X server configuration file status:
----------------------------------------
-rw------- 1 root root 5001 Jul 16 00:18 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
-------------------------------
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 2.6.39-2-amd64 (Debian 2.6.39-3) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-6) ) #1 SMP Tue Jul 5 02:51:22 UTC 2011
Contents of Xorg.0.log (from ~/crashnotes/Crashes/Xorg.0.log):
---------------------------------------------------------------------
[780058.145]
X.Org X Server 1.10.2.902 (1.10.3 RC 2)
Release Date: 2011-07-01
[780058.149] X Protocol Version 11, Revision 0
[780058.150] Build Operating System: Linux 2.6.39-2-amd64 x86_64 Debian
[780058.151] Current Operating System: Linux transfinity 2.6.38-2-amd64 #1 SMP Sun May 8 13:51:57 UTC 2011 x86_64
[780058.152] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=20a44ba6-981d-4526-a108-a8054b8cd263 ro quiet
[780058.153] Build Date: 02 July 2011 10:05:17AM
[780058.154] xorg-server 2:1.10.2.902-1 (Cyril Brulebois <kibi@debian.org>)
[780058.155] Current version of pixman: 0.21.8
[780058.156] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[780058.158] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[780058.162] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 15 22:49:41 2011
[780058.163] (==) Using config file: "/etc/X11/xorg.conf"
[780058.164] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[780058.166] (==) ServerLayout "Default Layout"
[780058.166] (**) |-->Screen "Default Screen" (0)
[780058.166] (**) | |-->Monitor "Generic Monitor"
[780058.167] (==) No device specified for screen "Default Screen".
Using the first device section listed.
[780058.167] (**) | |-->Device "GeForce 4"
[780058.167] (**) |-->Input Device "Generic Keyboard"
[780058.167] (**) |-->Input Device "Configured Mouse"
[780058.167] (**) Option "DontZap" "Off"
[780058.167] (**) Option "DontZoom" "Off"
[780058.167] (==) Automatically adding devices
[780058.167] (==) Automatically enabling devices
[780058.167] (WW) The directory "/usr/X11R6/lib/X11/fonts/misc" does not exist.
[780058.167] Entry deleted from font path.
[780058.167] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[780058.167] Entry deleted from font path.
[780058.167] (WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist.
[780058.167] Entry deleted from font path.
[780058.167] (WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
[780058.167] Entry deleted from font path.
[780058.167] (WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi/" does not exist.
[780058.167] Entry deleted from font path.
[780058.167] (WW) The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist.
[780058.167] Entry deleted from font path.
[780058.167] (WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
[780058.167] Entry deleted from font path.
[780058.167] (WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi" does not exist.
[780058.167] Entry deleted from font path.
[780058.167] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[780058.167] Entry deleted from font path.
[780058.168] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[780058.168] (==) ModulePath set to "/usr/lib/xorg/modules"
[780058.168] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[780058.168] (WW) Disabling Generic Keyboard
[780058.168] (WW) Disabling Configured Mouse
[780058.168] (II) Loader magic: 0x7d7f40
[780058.168] (II) Module ABI versions:
[780058.168] X.Org ANSI C Emulation: 0.4
[780058.168] X.Org Video Driver: 10.0
[780058.168] X.Org XInput driver : 12.2
[780058.168] X.Org Server Extension : 5.0
[780058.169] (--) PCI:*(0:0:5:0) 10de:0242:10de:0222 rev 162, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[780058.169] (II) Open ACPI successful (/var/run/acpid.socket)
[780058.170] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[780058.170] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[780058.170] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[780058.170] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[780058.170] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[780058.170] (II) "dri2" will be loaded by default.
[780058.170] (II) LoadModule: "dbe"
[780058.170] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[780058.170] (II) Module dbe: vendor="X.Org Foundation"
[780058.170] compiled for 1.10.2.902, module version = 1.0.0
[780058.170] Module class: X.Org Server Extension
[780058.170] ABI class: X.Org Server Extension, version 5.0
[780058.170] (II) Loading extension DOUBLE-BUFFER
[780058.170] (II) LoadModule: "ddc"
[780058.170] (II) Module "ddc" already built-in
[780058.170] (II) LoadModule: "dri"
[780058.171] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[780058.171] (II) Module dri: vendor="X.Org Foundation"
[780058.171] compiled for 1.10.2.902, module version = 1.0.0
[780058.171] ABI class: X.Org Server Extension, version 5.0
[780058.171] (II) Loading extension XFree86-DRI
[780058.171] (II) LoadModule: "extmod"
[780058.171] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[780058.172] (II) Module extmod: vendor="X.Org Foundation"
[780058.172] compiled for 1.10.2.902, module version = 1.0.0
[780058.172] Module class: X.Org Server Extension
[780058.172] ABI class: X.Org Server Extension, version 5.0
[780058.172] (II) Loading extension SELinux
[780058.172] (II) Loading extension MIT-SCREEN-SAVER
[780058.172] (II) Loading extension XFree86-VidModeExtension
[780058.172] (II) Loading extension XFree86-DGA
[780058.172] (II) Loading extension DPMS
[780058.172] (II) Loading extension XVideo
[780058.172] (II) Loading extension XVideo-MotionCompensation
[780058.172] (II) Loading extension X-Resource
[780058.172] (II) LoadModule: "glx"
[780058.172] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[780058.173] (II) Module glx: vendor="X.Org Foundation"
[780058.173] compiled for 1.10.2.902, module version = 1.0.0
[780058.173] ABI class: X.Org Server Extension, version 5.0
[780058.173] (==) AIGLX enabled
[780058.173] (II) Loading extension GLX
[780058.173] (II) LoadModule: "int10"
[780058.174] (II) Loading /usr/lib/xorg/modules/libint10.so
[780058.174] (II) Module int10: vendor="X.Org Foundation"
[780058.174] compiled for 1.10.2.902, module version = 1.0.0
[780058.174] ABI class: X.Org Video Driver, version 10.0
[780058.174] (II) LoadModule: "record"
[780058.174] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[780058.174] (II) Module record: vendor="X.Org Foundation"
[780058.174] compiled for 1.10.2.902, module version = 1.13.0
[780058.174] Module class: X.Org Server Extension
[780058.174] ABI class: X.Org Server Extension, version 5.0
[780058.174] (II) Loading extension RECORD
[780058.174] (II) LoadModule: "v4l"
[780058.175] (WW) Warning, couldn't open module v4l
[780058.175] (II) UnloadModule: "v4l"
[780058.175] (II) Unloading v4l
[780058.175] (EE) Failed to load module "v4l" (module does not exist, 0)
[780058.177] (II) LoadModule: "vbe"
[780058.177] (II) Loading /usr/lib/xorg/modules/libvbe.so
[780058.177] (II) Module vbe: vendor="X.Org Foundation"
[780058.177] compiled for 1.10.2.902, module version = 1.1.0
[780058.177] ABI class: X.Org Video Driver, version 10.0
[780058.177] (II) LoadModule: "dri2"
[780058.178] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[780058.178] (II) Module dri2: vendor="X.Org Foundation"
[780058.178] compiled for 1.10.2.902, module version = 1.2.0
[780058.178] ABI class: X.Org Server Extension, version 5.0
[780058.178] (II) Loading extension DRI2
[780058.178] (II) LoadModule: "nouveau"
[780058.178] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[780058.179] (II) Module nouveau: vendor="X.Org Foundation"
[780058.179] compiled for 1.10.1, module version = 0.0.16
[780058.179] Module class: X.Org Video Driver
[780058.179] ABI class: X.Org Video Driver, version 10.0
[780058.179] (II) NOUVEAU driver Date: Thu Mar 24 02:13:12 2011 +1000
[780058.179] (II) NOUVEAU driver for NVIDIA chipset families :
[780058.179] RIVA TNT (NV04)
[780058.179] RIVA TNT2 (NV05)
[780058.179] GeForce 256 (NV10)
[780058.179] GeForce 2 (NV11, NV15)
[780058.179] GeForce 4MX (NV17, NV18)
[780058.179] GeForce 3 (NV20)
[780058.179] GeForce 4Ti (NV25, NV28)
[780058.179] GeForce FX (NV3x)
[780058.179] GeForce 6 (NV4x)
[780058.179] GeForce 7 (G7x)
[780058.179] GeForce 8 (G8x)
[780058.179] GeForce GTX 200 (NVA0)
[780058.179] GeForce GTX 400 (NVC0)
[780058.179] (--) using VT number 7
[780058.186] drmOpenDevice: node name is /dev/dri/card0
[780058.186] drmOpenDevice: open result is 10, (OK)
[780058.186] drmOpenByBusid: Searching for BusID pci:0000:00:05.0
[780058.186] drmOpenDevice: node name is /dev/dri/card0
[780058.186] drmOpenDevice: open result is 10, (OK)
[780058.186] drmOpenByBusid: drmOpenMinor returns 10
[780058.186] drmOpenByBusid: drmGetBusid reports pci:0000:00:05.0
[780058.186] (II) [drm] nouveau interface version: 0.0.16
[780058.186] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[780058.186] (II) Loading sub module "dri"
[780058.186] (II) LoadModule: "dri"
[780058.187] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[780058.187] (II) Module dri: vendor="X.Org Foundation"
[780058.187] compiled for 1.10.2.902, module version = 1.0.0
[780058.187] ABI class: X.Org Server Extension, version 5.0
[780058.187] (II) NOUVEAU(0): Loaded DRI module
[780058.187] drmOpenDevice: node name is /dev/dri/card0
[780058.187] drmOpenDevice: open result is 11, (OK)
[780058.187] drmOpenDevice: node name is /dev/dri/card0
[780058.187] drmOpenDevice: open result is 11, (OK)
[780058.187] drmOpenByBusid: Searching for BusID pci:0000:00:05.0
[780058.187] drmOpenDevice: node name is /dev/dri/card0
[780058.187] drmOpenDevice: open result is 11, (OK)
[780058.187] drmOpenByBusid: drmOpenMinor returns 11
[780058.187] drmOpenByBusid: drmGetBusid reports pci:0000:00:05.0
[780058.187] (II) [drm] DRM interface version 1.4
[780058.187] (II) [drm] DRM open master succeeded.
[780058.187] (--) NOUVEAU(0): Chipset: "NVIDIA NV4e"
[780058.187] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[780058.187] (==) NOUVEAU(0): RGB weight 888
[780058.187] (==) NOUVEAU(0): Default visual is TrueColor
[780058.187] (**) NOUVEAU(0): Option "HWcursor" "off"
[780058.187] (**) NOUVEAU(0): Using SW cursor
[780058.187] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[780058.187] (==) NOUVEAU(0): Page flipping enabled
[780058.323] (II) NOUVEAU(0): Output VGA-1 using monitor section Generic Monitor
[780058.443] (II) NOUVEAU(0): EDID for output VGA-1
[780058.443] (II) NOUVEAU(0): Manufacturer: GWY Model: 13 Serial#: 16843009
[780058.443] (II) NOUVEAU(0): Year: 1998 Week: 0
[780058.443] (II) NOUVEAU(0): EDID Version: 1.1
[780058.443] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[780058.443] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
[780058.443] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 36 vert.: 27
[780058.443] (II) NOUVEAU(0): Gamma: 2.30
[780058.443] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[780058.443] (II) NOUVEAU(0): redX: 0.625 redY: 0.340 greenX: 0.285 greenY: 0.605
[780058.443] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.065 whiteX: 0.283 whiteY: 0.298
[780058.443] (II) NOUVEAU(0): Supported established timings:
[780058.443] (II) NOUVEAU(0): 720x400@70Hz
[780058.443] (II) NOUVEAU(0): 720x400@88Hz
[780058.443] (II) NOUVEAU(0): 640x480@60Hz
[780058.443] (II) NOUVEAU(0): 640x480@67Hz
[780058.443] (II) NOUVEAU(0): 640x480@72Hz
[780058.443] (II) NOUVEAU(0): 640x480@75Hz
[780058.443] (II) NOUVEAU(0): 800x600@56Hz
[780058.443] (II) NOUVEAU(0): 800x600@60Hz
[780058.443] (II) NOUVEAU(0): 800x600@72Hz
[780058.443] (II) NOUVEAU(0): 800x600@75Hz
[780058.443] (II) NOUVEAU(0): 832x624@75Hz
[780058.443] (II) NOUVEAU(0): 1024x768@60Hz
[780058.443] (II) NOUVEAU(0): 1024x768@70Hz
[780058.444] (II) NOUVEAU(0): 1024x768@75Hz
[780058.444] (II) NOUVEAU(0): 1280x1024@75Hz
[780058.444] (II) NOUVEAU(0): 1152x864@75Hz
[780058.444] (II) NOUVEAU(0): Manufacturer's mask: 0
[780058.444] (II) NOUVEAU(0): Supported standard timings:
[780058.444] (II) NOUVEAU(0): #0: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
[780058.444] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
[780058.444] (II) NOUVEAU(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[780058.444] (II) NOUVEAU(0): #3: hsize: 1024 vsize 768 refresh: 60 vid: 16481
[780058.444] (II) NOUVEAU(0): #4: hsize: 800 vsize 600 refresh: 85 vid: 22853
[780058.444] (II) NOUVEAU(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
[780058.444] (II) NOUVEAU(0): #6: hsize: 720 vsize 405 refresh: 70 vid: 51771
[780058.444] (II) NOUVEAU(0): #7: hsize: 640 vsize 480 refresh: 85 vid: 22833
[780058.444] (II) NOUVEAU(0): Supported detailed timing:
[780058.444] (II) NOUVEAU(0): clock: 202.5 MHz Image Size: 360 x 270 mm
[780058.444] (II) NOUVEAU(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
[780058.444] (II) NOUVEAU(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
[780058.444] (II) NOUVEAU(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 95 kHz,
[780058.444] (II) NOUVEAU(0): Monitor name: GATEWAY VX900
[780058.444] (II) NOUVEAU(0): Serial No:
[780058.444] (II) NOUVEAU(0): EDID (in hex):
[780058.444] (II) NOUVEAU(0): 00ffffffffffff001ef9130001010101
[780058.444] (II) NOUVEAU(0): 000801010e241b82e800b9a057499b26
[780058.444] (II) NOUVEAU(0): 10484cffef80a94f8199615961404559
[780058.444] (II) NOUVEAU(0): 45403bca31591a4f403062b0324040c0
[780058.444] (II) NOUVEAU(0): 1300680e1100001e000000fd0032a01e
[780058.444] (II) NOUVEAU(0): 5fff000a202020202020000000fc0047
[780058.444] (II) NOUVEAU(0): 415445574159205658393030000000ff
[780058.444] (II) NOUVEAU(0): 002020202020202020202020202000ee
[780058.444] (II) NOUVEAU(0): EDID vendor "GWY", prod id 19
[780058.444] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[780058.444] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[780058.444] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[780058.444] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[780058.444] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[780058.444] (II) NOUVEAU(0): Modeline "1680x1050_60.00"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1920x1440"x42.2 157.18 1920 1984 2096 2456 1440 1442 1451 1516 (64.0 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1920x1440"x40.9 152.27 1920 1984 2096 2456 1440 1442 1451 1516 (62.0 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1792x1344"x43.8 142.35 1792 1848 1960 2296 1344 1346 1354 1415 (62.0 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1600x1200"x75.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1600x1200"x50.7 131.07 1600 1656 1768 2048 1200 1202 1209 1263 (64.0 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1440x1280"x47.5 117.76 1440 1488 1600 1840 1280 1282 1290 1347 (64.0 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[780058.444] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[780058.445] (II) NOUVEAU(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[780058.445] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[780058.445] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[780058.445] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[780058.445] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[780058.445] (II) NOUVEAU(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[780058.445] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[780058.445] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[780058.445] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[780058.445] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[780058.445] (II) NOUVEAU(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
[780058.445] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[780058.445] (II) NOUVEAU(0): Output VGA-1 connected
[780058.445] (II) NOUVEAU(0): Using user preference for initial modes
[780058.445] (II) NOUVEAU(0): Output VGA-1 using initial mode 1680x1050_60.00
[780058.445] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[780058.445] (--) NOUVEAU(0): Virtual size is 1680x1050 (pitch 0)
[780058.445] (**) NOUVEAU(0): Mode "1680x1050_60.00": 147.1 MHz (scaled from 0.0 MHz), 65.2 kHz, 60.0 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1680x1050_60.00"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz)
[780058.445] (**) NOUVEAU(0): Mode "1920x1440": 157.2 MHz (scaled from 0.0 MHz), 64.0 kHz, 42.2 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1920x1440"x42.2 157.18 1920 1984 2096 2456 1440 1442 1451 1516 (64.0 kHz)
[780058.445] (**) NOUVEAU(0): Mode "1920x1440": 152.3 MHz (scaled from 0.0 MHz), 62.0 kHz, 40.9 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1920x1440"x40.9 152.27 1920 1984 2096 2456 1440 1442 1451 1516 (62.0 kHz)
[780058.445] (**) NOUVEAU(0): Mode "1792x1344": 142.3 MHz (scaled from 0.0 MHz), 62.0 kHz, 43.8 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1792x1344"x43.8 142.35 1792 1848 1960 2296 1344 1346 1354 1415 (62.0 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "1600x1200": 202.5 MHz (scaled from 0.0 MHz), 93.8 kHz, 75.0 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1600x1200"x75.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
[780058.445] (**) NOUVEAU(0): Mode "1600x1200": 131.1 MHz (scaled from 0.0 MHz), 64.0 kHz, 50.7 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1600x1200"x50.7 131.07 1600 1656 1768 2048 1200 1202 1209 1263 (64.0 kHz)
[780058.445] (**) NOUVEAU(0): Mode "1440x1280": 117.8 MHz (scaled from 0.0 MHz), 64.0 kHz, 47.5 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1440x1280"x47.5 117.76 1440 1488 1600 1840 1280 1282 1290 1347 (64.0 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "1280x1024": 157.5 MHz (scaled from 0.0 MHz), 91.1 kHz, 85.0 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[780058.445] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[780058.445] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
[780058.445] (II) NOUVEAU(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[780058.445] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[780058.445] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[780058.445] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[780058.445] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
[780058.445] (II) NOUVEAU(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[780058.445] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[780058.445] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[780058.445] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[780058.445] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 39.4 kHz, 87.8 Hz
[780058.445] (II) NOUVEAU(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
[780058.445] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[780058.445] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[780058.446] (**) NOUVEAU(0): Display dimensions: (360, 270) mm
[780058.446] (**) NOUVEAU(0): DPI set to (118, 98)
[780058.446] (II) Loading sub module "fb"
[780058.446] (II) LoadModule: "fb"
[780058.446] (II) Loading /usr/lib/xorg/modules/libfb.so
[780058.446] (II) Module fb: vendor="X.Org Foundation"
[780058.446] compiled for 1.10.2.902, module version = 1.0.0
[780058.446] ABI class: X.Org ANSI C Emulation, version 0.4
[780058.446] (II) Loading sub module "exa"
[780058.446] (II) LoadModule: "exa"
[780058.446] (II) Loading /usr/lib/xorg/modules/libexa.so
[780058.446] (II) Module exa: vendor="X.Org Foundation"
[780058.446] compiled for 1.10.2.902, module version = 2.5.0
[780058.446] ABI class: X.Org Video Driver, version 10.0
[780058.446] (II) Loading sub module "shadowfb"
[780058.446] (II) LoadModule: "shadowfb"
[780058.446] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[780058.447] (II) Module shadowfb: vendor="X.Org Foundation"
[780058.447] compiled for 1.10.2.902, module version = 1.0.0
[780058.447] ABI class: X.Org ANSI C Emulation, version 0.4
[780058.447] (--) Depth 24 pixmap format is 32 bpp
[780058.447] (II) NOUVEAU(0): Opened GPU channel 1
[780058.448] (II) NOUVEAU(0): [DRI2] Setup complete
[780058.448] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[780058.448] (II) NOUVEAU(0): GART: 64MiB available
[780058.450] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[780058.450] (II) EXA(0): Driver allocated offscreen pixmaps
[780058.450] (II) EXA(0): Driver registered support for the following operations:
[780058.450] (II) Solid
[780058.450] (II) Copy
[780058.450] (II) Composite (RENDER acceleration)
[780058.450] (II) UploadToScreen
[780058.450] (II) DownloadFromScreen
[780058.450] (==) NOUVEAU(0): Backing store disabled
[780058.450] (==) NOUVEAU(0): Silken mouse enabled
[780058.450] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[780058.450] (II) NOUVEAU(0): [XvMC] Extension initialized.
[780058.450] (**) NOUVEAU(0): DPMS enabled
[780058.450] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[780058.450] (--) RandR disabled
[780058.450] (II) Initializing built-in extension Generic Event Extension
[780058.450] (II) Initializing built-in extension SHAPE
[780058.450] (II) Initializing built-in extension MIT-SHM
[780058.450] (II) Initializing built-in extension XInputExtension
[780058.450] (II) Initializing built-in extension XTEST
[780058.450] (II) Initializing built-in extension BIG-REQUESTS
[780058.450] (II) Initializing built-in extension SYNC
[780058.451] (II) Initializing built-in extension XKEYBOARD
[780058.451] (II) Initializing built-in extension XC-MISC
[780058.451] (II) Initializing built-in extension SECURITY
[780058.451] (II) Initializing built-in extension XINERAMA
[780058.451] (II) Initializing built-in extension XFIXES
[780058.451] (II) Initializing built-in extension RENDER
[780058.451] (II) Initializing built-in extension RANDR
[780058.451] (II) Initializing built-in extension COMPOSITE
[780058.451] (II) Initializing built-in extension DAMAGE
[780058.451] (II) SELinux: Disabled on system
[780058.463] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[780058.463] (II) AIGLX: enabled GLX_INTEL_swap_event
[780058.463] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[780058.463] (II) AIGLX: enabled GLX_SGI_make_current_read
[780058.463] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[780058.463] (II) AIGLX: Loaded and initialized /usr/lib/x86_64-linux-gnu/dri/nouveau_dri.so
[780058.463] (II) GLX: Initialized DRI2 GL provider for screen 0
[780058.474] (II) NOUVEAU(0): NVEnterVT is called.
[780058.495] (II) NOUVEAU(0): Setting screen physical size to 444 x 277
[780058.495] resize called 1680 1050
[780058.743] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[780058.743] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[780058.743] (II) LoadModule: "evdev"
[780058.743] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[780058.743] (II) Module evdev: vendor="X.Org Foundation"
[780058.743] compiled for 1.10.1, module version = 2.6.0
[780058.743] Module class: X.Org XInput Driver
[780058.743] ABI class: X.Org XInput driver, version 12.2
[780058.743] (II) Using input driver 'evdev' for 'Power Button'
[780058.743] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[780058.743] (**) Power Button: always reports core events
[780058.743] (**) Power Button: Device: "/dev/input/event2"
[780058.743] (--) Power Button: Found keys
[780058.743] (II) Power Button: Configuring as keyboard
[780058.743] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[780058.743] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[780058.743] (**) Option "xkb_rules" "evdev"
[780058.743] (**) Option "xkb_model" "pc104"
[780058.743] (**) Option "xkb_layout" "us"
[780058.743] (**) Option "xkb_variant" "dvorak"
[780058.743] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,terminate:ctrl_alt_bksp"
[780058.779] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[780058.779] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[780058.779] (II) Using input driver 'evdev' for 'Power Button'
[780058.779] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[780058.779] (**) Power Button: always reports core events
[780058.779] (**) Power Button: Device: "/dev/input/event1"
[780058.779] (--) Power Button: Found keys
[780058.780] (II) Power Button: Configuring as keyboard
[780058.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[780058.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[780058.780] (**) Option "xkb_rules" "evdev"
[780058.780] (**) Option "xkb_model" "pc104"
[780058.780] (**) Option "xkb_layout" "us"
[780058.780] (**) Option "xkb_variant" "dvorak"
[780058.780] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,terminate:ctrl_alt_bksp"
[780058.782] (II) config/udev: Adding input device Wacom Bamboo (/dev/input/event4)
[780058.782] (**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
[780058.782] (**) Wacom Bamboo: Applying InputClass "Wacom class"
[780058.782] (II) LoadModule: "wacom"
[780058.782] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[780058.783] (II) Module wacom: vendor="X.Org Foundation"
[780058.783] compiled for 1.10.1, module version = 0.10.10
[780058.783] Module class: X.Org XInput Driver
[780058.783] ABI class: X.Org XInput driver, version 12.2
[780058.783] (II) Using input driver 'wacom' for 'Wacom Bamboo'
[780058.783] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[780058.783] (**) Wacom Bamboo: always reports core events
[780058.783] (**) Option "Device" "/dev/input/event4"
[780058.783] (II) Wacom Bamboo: type not specified, assuming 'stylus'.
[780058.783] (II) Wacom Bamboo: other types will be automatically added.
[780058.783] (--) Wacom Bamboo stylus: using pressure threshold of 27 for button 1
[780058.783] (--) Wacom Bamboo stylus: Wacom USB Bamboo tablet maxX=14760 maxY=9225 maxZ=511 resX=100000 resY=100000 tilt=disabled
[780058.783] (II) Wacom Bamboo stylus: hotplugging dependent devices.
[780058.783] (**) Wacom Bamboo eraser: Applying InputClass "evdev tablet catchall"
[780058.783] (**) Wacom Bamboo eraser: Applying InputClass "Wacom class"
[780058.783] (II) Using input driver 'wacom' for 'Wacom Bamboo eraser'
[780058.783] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[780058.783] (**) Wacom Bamboo eraser: always reports core events
[780058.783] (**) Option "Device" "/dev/input/event4"
[780058.783] (--) Wacom Bamboo eraser: Wacom USB Bamboo tablet maxX=14760 maxY=9225 maxZ=511 resX=100000 resY=100000 tilt=disabled
[780058.783] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input6/event4"
[780058.783] (II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
[780058.783] (--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=100000 resol Y=100000
[780058.784] (**) Wacom Bamboo eraser: (accel) keeping acceleration scheme 1
[780058.784] (**) Wacom Bamboo eraser: (accel) acceleration profile 0
[780058.784] (**) Wacom Bamboo eraser: (accel) acceleration factor: 2.000
[780058.784] (**) Wacom Bamboo eraser: (accel) acceleration threshold: 4
[780058.784] (**) Wacom Bamboo cursor: Applying InputClass "evdev tablet catchall"
[780058.784] (**) Wacom Bamboo cursor: Applying InputClass "Wacom class"
[780058.784] (II) Using input driver 'wacom' for 'Wacom Bamboo cursor'
[780058.784] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[780058.784] (**) Wacom Bamboo cursor: always reports core events
[780058.784] (**) Option "Device" "/dev/input/event4"
[780058.784] (--) Wacom Bamboo cursor: Wacom USB Bamboo tablet maxX=14760 maxY=9225 maxZ=511 resX=100000 resY=100000 tilt=disabled
[780058.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input6/event4"
[780058.784] (II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
[780058.784] (--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=100000 resol Y=100000
[780058.784] (**) Wacom Bamboo cursor: (accel) keeping acceleration scheme 1
[780058.784] (**) Wacom Bamboo cursor: (accel) acceleration profile 0
[780058.784] (**) Wacom Bamboo cursor: (accel) acceleration factor: 2.000
[780058.784] (**) Wacom Bamboo cursor: (accel) acceleration threshold: 4
[780058.785] (**) Wacom Bamboo pad: Applying InputClass "evdev tablet catchall"
[780058.785] (**) Wacom Bamboo pad: Applying InputClass "Wacom class"
[780058.785] (II) Using input driver 'wacom' for 'Wacom Bamboo pad'
[780058.785] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[780058.785] (**) Wacom Bamboo pad: always reports core events
[780058.785] (**) Option "Device" "/dev/input/event4"
[780058.785] (--) Wacom Bamboo pad: Wacom USB Bamboo tablet maxX=14760 maxY=9225 maxZ=511 resX=100000 resY=100000 tilt=disabled
[780058.785] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input6/event4"
[780058.785] (II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
[780058.785] (**) Wacom Bamboo pad: (accel) keeping acceleration scheme 1
[780058.785] (**) Wacom Bamboo pad: (accel) acceleration profile 0
[780058.785] (**) Wacom Bamboo pad: (accel) acceleration factor: 2.000
[780058.785] (**) Wacom Bamboo pad: (accel) acceleration threshold: 4
[780058.785] (II) Wacom Bamboo stylus: hotplugging completed.
[780058.785] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input6/event4"
[780058.785] (II) XINPUT: Adding extended input device "Wacom Bamboo stylus" (type: STYLUS)
[780058.785] (--) Wacom Bamboo stylus: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=100000 resol Y=100000
[780058.785] (**) Wacom Bamboo stylus: (accel) keeping acceleration scheme 1
[780058.786] (**) Wacom Bamboo stylus: (accel) acceleration profile 0
[780058.786] (**) Wacom Bamboo stylus: (accel) acceleration factor: 2.000
[780058.786] (**) Wacom Bamboo stylus: (accel) acceleration threshold: 4
[780058.786] (II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse0)
[780058.786] (II) No input driver/identifier specified (ignoring)
[780058.791] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[780058.791] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[780058.791] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[780058.791] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[780058.791] (**) AT Translated Set 2 keyboard: always reports core events
[780058.791] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[780058.791] (--) AT Translated Set 2 keyboard: Found keys
[780058.791] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[780058.791] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[780058.791] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[780058.791] (**) Option "xkb_rules" "evdev"
[780058.791] (**) Option "xkb_model" "pc104"
[780058.791] (**) Option "xkb_layout" "us"
[780058.791] (**) Option "xkb_variant" "dvorak"
[780058.791] (**) Option "xkb_options" "lv3:ralt_switch,compose:caps,terminate:ctrl_alt_bksp"
[780058.792] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[780058.792] (II) No input driver/identifier specified (ignoring)
[780066.761] (II) AIGLX: Suspending AIGLX clients for VT switch
[780066.761] (II) NOUVEAU(0): NVLeaveVT is called.
[780069.499] (II) Open ACPI successful (/var/run/acpid.socket)
[780069.499] (II) AIGLX: Resuming AIGLX clients after VT switch
[780069.499] (II) NOUVEAU(0): NVEnterVT is called.
------------------------------
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
N: input/event2
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBVARIANT=dvorak
E: XKBOPTIONS=lv3:ralt_switch,compose:caps,terminate:ctrl_alt_bksp
E: DMI_VENDOR=Shuttle Inc
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1
N: input/event1
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBVARIANT=dvorak
E: XKBOPTIONS=lv3:ralt_switch,compose:caps,terminate:ctrl_alt_bksp
E: DMI_VENDOR=Shuttle Inc
P: /devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input4/event4
N: input/event4
S: input/by-path/pci-0000:00:0b.1-usb-0:4.1:1.0-wacom
S: input/tablet-bamboo
S: input/wacom
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_VENDOR=Wacom_Co._Ltd.
E: ID_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_VENDOR_ID=056a
E: ID_MODEL=MTE-450
E: ID_MODEL_ENC=MTE-450
E: ID_MODEL_ID=0065
E: ID_REVISION=0108
E: ID_SERIAL=Wacom_Co._Ltd._MTE-450
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=wacom
E: ID_PATH=pci-0000:00:0b.1-usb-0:4.1:1.0
E: WACOM_TYPE=stylus
E: DEVLINKS=/dev/input/by-path/pci-0000:00:0b.1-usb-0:4.1:1.0-wacom /dev/input/tablet-bamboo /dev/input/wacom
P: /devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input4/mouse0
N: input/mouse0
S: input/by-id/usb-Wacom_Co._Ltd._MTE-450-mouse
S: input/by-path/pci-0000:00:0b.1-usb-0:4.1:1.0-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:0b.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input4/mouse0
E: MAJOR=13
E: MINOR=32
E: DEVNAME=/dev/input/mouse0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_VENDOR=Wacom_Co._Ltd.
E: ID_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_VENDOR_ID=056a
E: ID_MODEL=MTE-450
E: ID_MODEL_ENC=MTE-450
E: ID_MODEL_ID=0065
E: ID_REVISION=0108
E: ID_SERIAL=Wacom_Co._Ltd._MTE-450
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=wacom
E: ID_PATH=pci-0000:00:0b.1-usb-0:4.1:1.0
E: DEVLINKS=/dev/input/by-id/usb-Wacom_Co._Ltd._MTE-450-mouse /dev/input/by-path/pci-0000:00:0b.1-usb-0:4.1:1.0-mouse
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: XKBVARIANT=dvorak
E: XKBOPTIONS=lv3:ralt_switch,compose:caps,terminate:ctrl_alt_bksp
E: DMI_VENDOR=Shuttle Inc
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
P: /devices/platform/pcspkr/input/input3/event3
N: input/event3
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=Shuttle Inc
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
DRM Information from dmesg:
---------------------------
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 2.572612] Linux agpgart interface v0.103
[ 19.722027] [drm] Initialized drm 1.1.0 20060810
[ 19.876971] [drm] nouveau 0000:00:05.0: Detected an NV40 generation card (0x04e000a2)
[ 19.879898] [drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PRAMIN
[ 19.921616] [drm] nouveau 0000:00:05.0: ... appears to be valid
[ 19.921626] [drm] nouveau 0000:00:05.0: BIT BIOS found
[ 19.921633] [drm] nouveau 0000:00:05.0: Bios version 05.51.22.24
[ 19.921641] [drm] nouveau 0000:00:05.0: TMDS table version 1.1
[ 19.921647] [drm] nouveau 0000:00:05.0: BIT table 'd' not found
[ 19.921653] [drm] nouveau 0000:00:05.0: Found Display Configuration Block version 3.0
[ 19.921661] [drm] nouveau 0000:00:05.0: Raw DCB entry 0: 02000300 00000023
[ 19.921670] [drm] nouveau 0000:00:05.0: DCB connector table: VHER 0x30 5 7 2
[ 19.921677] [drm] nouveau 0000:00:05.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[ 19.921688] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset 0xCDD0
[ 19.921819] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset 0xCF27
[ 19.921826] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset 0xCF28
[ 19.922528] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset 0xD094
[ 19.922538] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset 0xD0DD
[ 20.428062] [drm] nouveau 0000:00:05.0: mem timing table length unknown: 14
[ 20.428072] [drm] nouveau 0000:00:05.0: 1 available performance level(s)
[ 20.428082] [drm] nouveau 0000:00:05.0: 0: memory 0MHz core 425MHz fanspeed 100%
[ 20.428097] [drm] nouveau 0000:00:05.0: c: memory 0MHz
[ 20.428978] [drm] nouveau 0000:00:05.0: Detected 64MiB VRAM
[ 20.430503] [drm] nouveau 0000:00:05.0: 64 MiB GART (aperture)
[ 20.430588] [drm] nouveau 0000:00:05.0: Saving VGA fonts
[ 20.473779] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 20.473785] [drm] No driver support for vblank timestamp query.
[ 20.475076] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 20.616298] [drm] nouveau 0000:00:05.0: allocated 1600x1200 fb: 0x49000, bo ffff880075d61800
[ 20.618895] drm: registered panic notifier
[ 20.618908] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:05.0 on minor 0
[ 21.390346] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 21.390358] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 25.218396] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 25.238469] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 25.238477] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 161.096524] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 161.116593] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 161.116597] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 163.651694] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 163.671766] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 163.671774] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 169.173052] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 169.193124] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 169.193128] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 169.249575] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 169.259704] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 169.259707] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 169.602930] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 169.622992] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 169.622996] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 176.488279] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 176.508347] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 176.508351] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 359.666448] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 359.686520] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 359.686523] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 362.510571] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 362.530641] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 362.530649] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 365.097059] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 365.117142] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 365.117150] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 365.498610] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 365.508746] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 365.508750] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 369.691389] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 369.711463] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 369.711470] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2146.369267] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2146.389336] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2146.389340] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2151.628601] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2151.648682] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2151.648689] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2156.648539] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2156.668612] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2156.668621] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2167.216602] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2167.236692] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2167.236699] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2168.541302] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2168.561367] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2168.561371] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2172.940078] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2172.960152] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2172.960159] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2177.250104] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2177.270164] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2177.270168] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2178.815074] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2178.835550] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2178.835558] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2180.613850] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2180.633925] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2180.633933] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2182.463953] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2182.484025] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2182.484032] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2184.646724] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2184.666801] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2184.666809] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2187.436738] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2187.456811] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2187.456818] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2188.762840] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2188.782899] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2188.782903] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
[ 2190.585842] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 2190.605917] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0)
[ 2190.605924] [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (700, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.39-2-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-nouveau depends on:
ii libc6 2.13-7 Embedded GNU C Library: Shared lib
ii libdrm-nouveau1a 2.4.26-1 Userspace interface to nouveau-spe
ii libudev0 171-3 libudev shared library
ii xserver-xorg-core [xorg-v 2:1.10.2.902-1 Xorg X server - core server
xserver-xorg-video-nouveau recommends no packages.
xserver-xorg-video-nouveau suggests no packages.
-- no debconf information
Reply to: