x11-utils: Changes to 'debian-unstable'
debian/changelog | 8
debian/control | 2
xprop/ChangeLog | 116 ++++++++++++
xprop/Makefile.am | 17 -
xprop/Makefile.in | 293 +++++++++++++++++++++----------
xprop/aclocal.m4 | 424 +++++++++++++++++++++++++++++++++++++++++-----
xprop/configure | 121 ++++++++-----
xprop/configure.ac | 11 -
xprop/dsimple.c | 24 --
xprop/dsimple.h | 11 -
xprop/man/Makefile.am | 12 +
xprop/man/Makefile.in | 415 +++++++++++++++++++++++++++++++++++++++++++++
xprop/man/xprop.man | 358 ++++++++++++++++++++++++++++++++++++++
xprop/xprop.c | 59 +++---
xprop/xprop.man | 356 --------------------------------------
xwininfo/ChangeLog | 81 ++++++++
xwininfo/Makefile.am | 18 -
xwininfo/Makefile.in | 294 +++++++++++++++++++++----------
xwininfo/aclocal.m4 | 424 +++++++++++++++++++++++++++++++++++++++++-----
xwininfo/autogen.sh | 13 -
xwininfo/configure | 105 +++++++----
xwininfo/configure.ac | 11 -
xwininfo/dsimple.c | 30 +--
xwininfo/man/Makefile.am | 12 +
xwininfo/man/Makefile.in | 415 +++++++++++++++++++++++++++++++++++++++++++++
xwininfo/man/xwininfo.man | 204 ++++++++++++++++++++++
xwininfo/xwininfo.c | 170 +++++++++---------
xwininfo/xwininfo.man | 204 ----------------------
28 files changed, 3070 insertions(+), 1138 deletions(-)
New commits:
commit 783bba32b29080e82f8df0313addca425cdf4388
Author: Cyril Brulebois <kibi@debian.org>
Date: Thu Jun 30 15:17:05 2011 +0200
Upload to unstable.
diff --git a/debian/changelog b/debian/changelog
index 9277868..cd47046 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,10 +1,10 @@
-x11-utils (7.6+3) UNRELEASED; urgency=low
+x11-utils (7.6+3) unstable; urgency=low
* xprop 1.2.1
* xwininfo 1.1.2
* Bump Standards-Version to 3.9.2 (no changes).
- -- Cyril Brulebois <kibi@debian.org> Thu, 30 Jun 2011 15:12:57 +0200
+ -- Cyril Brulebois <kibi@debian.org> Thu, 30 Jun 2011 15:17:02 +0200
x11-utils (7.6+2) unstable; urgency=low
commit 418fbff461a8f5c4d0de024798b43feea9f1b05a
Author: Cyril Brulebois <kibi@debian.org>
Date: Thu Jun 30 15:16:36 2011 +0200
Bump Standards-Version to 3.9.2 (no changes).
diff --git a/debian/changelog b/debian/changelog
index 3cc110e..9277868 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -2,6 +2,7 @@ x11-utils (7.6+3) UNRELEASED; urgency=low
* xprop 1.2.1
* xwininfo 1.1.2
+ * Bump Standards-Version to 3.9.2 (no changes).
-- Cyril Brulebois <kibi@debian.org> Thu, 30 Jun 2011 15:12:57 +0200
diff --git a/debian/control b/debian/control
index 2de8d85..95358b5 100644
--- a/debian/control
+++ b/debian/control
@@ -55,7 +55,7 @@ Build-Depends:
# xvinfo: libxv-dev, libx11-dev
# xwininfo: libxmuu-dev, libxext-dev, libx11-dev, libxcb-shape0-dev,
# x11proto-core-dev
-Standards-Version: 3.9.1
+Standards-Version: 3.9.2
Vcs-Git: git://git.debian.org/git/pkg-xorg/app/x11-utils
Vcs-Browser: http://git.debian.org/?p=pkg-xorg/app/x11-utils.git
commit 5088cb1378ee18a61c04747efadacb57b179d407
Author: Cyril Brulebois <kibi@debian.org>
Date: Thu Jun 30 15:15:01 2011 +0200
xwininfo 1.1.2
diff --git a/debian/changelog b/debian/changelog
index 2674247..3cc110e 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,6 +1,7 @@
x11-utils (7.6+3) UNRELEASED; urgency=low
* xprop 1.2.1
+ * xwininfo 1.1.2
-- Cyril Brulebois <kibi@debian.org> Thu, 30 Jun 2011 15:12:57 +0200
diff --git a/xwininfo/ChangeLog b/xwininfo/ChangeLog
index 6ac85ee..797f1a6 100644
--- a/xwininfo/ChangeLog
+++ b/xwininfo/ChangeLog
@@ -1,3 +1,84 @@
+commit 1c58b461a84a8e75c53ce863470a5c8d8201261b
+Author: Alan Coopersmith <alan.coopersmith@oracle.com>
+Date: Wed Jun 29 21:25:38 2011 -0700
+
+ xwininfo 1.1.2
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
+
+commit 7cdc6223e7d7f79050df680d3b6d06653d75dd46
+Author: Alan Coopersmith <alan.coopersmith@oracle.com>
+Date: Fri Jun 17 21:44:39 2011 -0700
+
+ Update to xcb-icccm 0.3.8 API
+
+ Changes all names to the xcb_icccm_* namespaced versions.
+ Requires xcb-icccm 0.3.8 (from new xcb-util-wm package) if used.
+ Still disabled by default, only enabled with --with-xcb-icccm
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
+
+commit 456b0fafa73f1227adf07ee924b316cbf9fe83cb
+Author: Alan Coopersmith <alan.coopersmith@oracle.com>
+Date: Tue Jun 7 23:00:06 2011 -0700
+
+ When matching window names, ensure name lengths match too
+
+ Prevents strncmp returning on partial matches when one is shorter.
+ https://bugs.freedesktop.org/show_bug.cgi?id=37710
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
+ Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
+
+commit ee3b33c9e757b8d7f9f4c9761f3c66826adc4f59
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Wed Jan 19 10:06:57 2011 -0500
+
+ config: move man pages into their own directory
+
+ Use services provided by XORG_MANPAGE_SECTIONS.
+ Use standard Makefile for man pages.
+
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit 584ab8bd1cb267510d8966357aaab100fac575be
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Thu Jan 13 11:15:48 2011 -0500
+
+ man: remove trailing spaces and tabs
+
+ Using s/[ \t]*$//
+
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit 0d00fa84560e5fbf09f2674078e205243f51787a
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Wed Jan 12 16:28:02 2011 -0500
+
+ config: replace deprecated AM_CONFIG_HEADER with AC_CONFIG_HEADERS
+
+ This silences an Autoconf warning
+
+commit 65fe1630ad2cabdb9bf46333925aabdc7f61dc06
+Author: Tim van der Molen <tbvdm@xs4all.nl>
+Date: Sun Jan 9 18:21:30 2011 +0100
+
+ Fix for invalid free if window has a _NET_WM_NAME property.
+
+ In this case xcb_get_wm_name_reply() is not called, so reorganize the
+ code to not free a result which never was allocated.
+
+ Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
+ Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
+
+commit 064e52f367a2b55e6c32c778684da946c319ca81
+Author: Alan Coopersmith <alan.coopersmith@oracle.com>
+Date: Fri Jan 7 20:27:10 2011 -0800
+
+ xwininfo.c:282: warning: no previous prototype for 'usage'
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
+
commit 98d5614d4688013e2fe7447eab723e0a43ee27b8
Author: Alan Coopersmith <alan.coopersmith@oracle.com>
Date: Sat Oct 30 11:58:33 2010 -0700
diff --git a/xwininfo/Makefile.am b/xwininfo/Makefile.am
index 16e47d7..1bb0664 100644
--- a/xwininfo/Makefile.am
+++ b/xwininfo/Makefile.am
@@ -19,6 +19,7 @@
# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.
+SUBDIRS = man
bin_PROGRAMS = xwininfo
AM_CFLAGS = $(CWARNFLAGS) $(XWININFO_CFLAGS)
@@ -31,17 +32,8 @@ xwininfo_SOURCES = \
dsimple.h \
xwininfo.c
-appman_PRE = \
- xwininfo.man
-
-
-appmandir = $(APP_MAN_DIR)
-
-appman_DATA = $(appman_PRE:man=@APP_MAN_SUFFIX@)
-
-EXTRA_DIST = $(appman_PRE) autogen.sh strnlen.h
+EXTRA_DIST = strnlen.h
MAINTAINERCLEANFILES = ChangeLog INSTALL
-CLEANFILES = $(appman_DATA)
.PHONY: ChangeLog INSTALL
@@ -52,9 +44,3 @@ ChangeLog:
$(CHANGELOG_CMD)
dist-hook: ChangeLog INSTALL
-
-SUFFIXES = .$(APP_MAN_SUFFIX) .man
-
-# String replacements in MAN_SUBSTS now come from xorg-macros.m4 via configure
-.man.$(APP_MAN_SUFFIX):
- $(AM_V_GEN)$(SED) $(MAN_SUBSTS) < $< > $@
diff --git a/xwininfo/Makefile.in b/xwininfo/Makefile.in
index 92fb68e..0871296 100644
--- a/xwininfo/Makefile.in
+++ b/xwininfo/Makefile.in
@@ -36,7 +36,6 @@
# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.
-
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
@@ -72,7 +71,7 @@ mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)"
+am__installdirs = "$(DESTDIR)$(bindir)"
PROGRAMS = $(bin_PROGRAMS)
am_xwininfo_OBJECTS = clientwin.$(OBJEXT) dsimple.$(OBJEXT) \
xwininfo.$(OBJEXT)
@@ -101,30 +100,21 @@ am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
SOURCES = $(xwininfo_SOURCES)
DIST_SOURCES = $(xwininfo_SOURCES)
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-DATA = $(appman_DATA)
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+ distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
@@ -132,6 +122,31 @@ am__remove_distdir = \
{ test ! -d "$(distdir)" \
|| { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr "$(distdir)"; }; }
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
@@ -198,6 +213,7 @@ PKG_CONFIG = @PKG_CONFIG@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
+STRICT_CFLAGS = @STRICT_CFLAGS@
STRIP = @STRIP@
VERSION = @VERSION@
XLIB_CFLAGS = @XLIB_CFLAGS@
@@ -255,6 +271,7 @@ target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
+SUBDIRS = man
AM_CFLAGS = $(CWARNFLAGS) $(XWININFO_CFLAGS)
xwininfo_LDADD = $(XWININFO_LIBS) $(LIBOBJS)
xwininfo_SOURCES = \
@@ -264,20 +281,13 @@ xwininfo_SOURCES = \
dsimple.h \
xwininfo.c
-appman_PRE = \
- xwininfo.man
-
-appmandir = $(APP_MAN_DIR)
-appman_DATA = $(appman_PRE:man=@APP_MAN_SUFFIX@)
-EXTRA_DIST = $(appman_PRE) autogen.sh strnlen.h
+EXTRA_DIST = strnlen.h
MAINTAINERCLEANFILES = ChangeLog INSTALL
-CLEANFILES = $(appman_DATA)
-SUFFIXES = .$(APP_MAN_SUFFIX) .man
all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-am
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
-.SUFFIXES: .$(APP_MAN_SUFFIX) .man .c .o .obj
+.SUFFIXES: .c .o .obj
am--refresh:
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@@ -396,26 +406,76 @@ distclean-compile:
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-install-appmanDATA: $(appman_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
- @list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appmandir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(appmandir)" || exit $$?; \
- done
-uninstall-appmanDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(appman_DATA)'; test -n "$(appmandir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- test -n "$$files" || exit 0; \
- echo " ( cd '$(DESTDIR)$(appmandir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(appmandir)" && rm -f $$files
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+ @fail= failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -427,10 +487,23 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
mkid -fID $$unique
tags: TAGS
-TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
@@ -449,7 +522,7 @@ TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
fi; \
fi
ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -501,6 +574,34 @@ distdir: $(DISTFILES)
|| exit 1; \
fi; \
done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
@@ -620,21 +721,22 @@ distcleancheck: distclean
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(DATA) config.h
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)"; do \
+check: check-recursive
+all-am: Makefile $(PROGRAMS) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(bindir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-installcheck: installcheck-am
+installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
@@ -643,7 +745,6 @@ install-strip:
mostlyclean-generic:
clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
@@ -653,96 +754,97 @@ maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
+clean: clean-recursive
clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-distclean: distclean-am
+distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(DEPDIR) ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-tags
-dvi: dvi-am
+dvi: dvi-recursive
dvi-am:
-html: html-am
+html: html-recursive
html-am:
-info: info-am
+info: info-recursive
info-am:
-install-data-am: install-appmanDATA
+install-data-am:
-install-dvi: install-dvi-am
+install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am: install-binPROGRAMS
-install-html: install-html-am
+install-html: install-html-recursive
install-html-am:
-install-info: install-info-am
+install-info: install-info-recursive
install-info-am:
install-man:
-install-pdf: install-pdf-am
+install-pdf: install-pdf-recursive
install-pdf-am:
-install-ps: install-ps-am
+install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
-maintainer-clean: maintainer-clean-am
+maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf $(DEPDIR) ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
-mostlyclean: mostlyclean-am
+mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-compile mostlyclean-generic
-pdf: pdf-am
+pdf: pdf-recursive
pdf-am:
-ps: ps-am
+ps: ps-recursive
ps-am:
-uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS
+uninstall-am: uninstall-binPROGRAMS
-.MAKE: all install-am install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
+ ctags-recursive install-am install-strip tags-recursive
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
- clean-binPROGRAMS clean-generic ctags dist dist-all dist-bzip2 \
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am am--refresh check check-am clean clean-binPROGRAMS \
+ clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \
dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
dist-zip distcheck distclean distclean-compile \
distclean-generic distclean-hdr distclean-tags distcleancheck \
distdir distuninstallcheck dvi dvi-am html html-am info \
- info-am install install-am install-appmanDATA \
- install-binPROGRAMS install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-appmanDATA \
- uninstall-binPROGRAMS
+ info-am install install-am install-binPROGRAMS install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
+ uninstall uninstall-am uninstall-binPROGRAMS
.PHONY: ChangeLog INSTALL
@@ -755,10 +857,6 @@ ChangeLog:
dist-hook: ChangeLog INSTALL
-# String replacements in MAN_SUBSTS now come from xorg-macros.m4 via configure
-.man.$(APP_MAN_SUFFIX):
- $(AM_V_GEN)$(SED) $(MAN_SUBSTS) < $< > $@
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/xwininfo/aclocal.m4 b/xwininfo/aclocal.m4
index face861..d82df39 100644
--- a/xwininfo/aclocal.m4
+++ b/xwininfo/aclocal.m4
@@ -406,18 +406,6 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
-
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
@@ -1067,7 +1055,7 @@ dnl DEALINGS IN THE SOFTWARE.
# See the "minimum version" comment for each macro you use to see what
# version you require.
m4_defun([XORG_MACROS_VERSION],[
-m4_define([vers_have], [1.11.0])
+m4_define([vers_have], [1.15.0])
m4_define([maj_have], m4_substr(vers_have, 0, m4_index(vers_have, [.])))
m4_define([maj_needed], m4_substr([$1], 0, m4_index([$1], [.])))
m4_if(m4_cmp(maj_have, maj_needed), 0,,
@@ -1094,7 +1082,7 @@ AC_PATH_PROGS(RAWCPP, [cpp], [${CPP}],
# which is not the best choice for supporting other OS'es, but covers most
# of the ones we need for now.
AC_MSG_CHECKING([if $RAWCPP requires -undef])
-AC_LANG_CONFTEST([Does cpp redefine unix ?])
+AC_LANG_CONFTEST([AC_LANG_SOURCE([[Does cpp redefine unix ?]])])
if test `${RAWCPP} < conftest.$ac_ext | grep -c 'unix'` -eq 1 ; then
AC_MSG_RESULT([no])
else
@@ -1112,7 +1100,7 @@ fi
rm -f conftest.$ac_ext
AC_MSG_CHECKING([if $RAWCPP requires -traditional])
-AC_LANG_CONFTEST([Does cpp preserve "whitespace"?])
+AC_LANG_CONFTEST([AC_LANG_SOURCE([[Does cpp preserve "whitespace"?]])])
if test `${RAWCPP} < conftest.$ac_ext | grep -c 'preserve \"'` -eq 1 ; then
AC_MSG_RESULT([no])
else
@@ -1462,6 +1450,123 @@ AM_CONDITIONAL([HAVE_XMLTO_TEXT], [test $have_xmlto_text = yes])
AM_CONDITIONAL([HAVE_XMLTO], [test "$have_xmlto" = yes])
]) # XORG_WITH_XMLTO
+# XORG_WITH_XSLTPROC([MIN-VERSION], [DEFAULT])
+# --------------------------------------------
+# Minimum version: 1.12.0
+# Minimum version for optional DEFAULT argument: 1.12.0
+#
+# XSLT (Extensible Stylesheet Language Transformations) is a declarative,
+# XML-based language used for the transformation of XML documents.
+# The xsltproc command line tool is for applying XSLT stylesheets to XML documents.
+# It is used under the cover by xmlto to generate html files from DocBook/XML.
+# The XSLT processor is often used as a standalone tool for transformations.
+# It should not be assumed that this tool is used only to work with documnetation.
+# When DEFAULT is not specified, --with-xsltproc assumes 'auto'.
+#
+# Interface to module:
+# HAVE_XSLTPROC: used in makefiles to conditionally generate documentation
+# XSLTPROC: returns the path of the xsltproc program found
+# returns the path set by the user in the environment
+# --with-xsltproc: 'yes' user instructs the module to use xsltproc
+# 'no' user instructs the module not to use xsltproc
+# have_xsltproc: returns yes if xsltproc found in PATH or no
+#
+# If the user sets the value of XSLTPROC, AC_PATH_PROG skips testing the path.
+#
+AC_DEFUN([XORG_WITH_XSLTPROC],[
+AC_ARG_VAR([XSLTPROC], [Path to xsltproc command])
+# Preserves the interface, should it be implemented later
+m4_ifval([$1], [m4_warn([syntax], [Checking for xsltproc MIN-VERSION is not implemented])])
+m4_define([_defopt], m4_default([$2], [auto]))
+AC_ARG_WITH(xsltproc,
+ AS_HELP_STRING([--with-xsltproc],
+ [Use xsltproc for the transformation of XML documents (default: ]_defopt[)]),
+ [use_xsltproc=$withval], [use_xsltproc=]_defopt)
+m4_undefine([_defopt])
+
+if test "x$use_xsltproc" = x"auto"; then
+ AC_PATH_PROG([XSLTPROC], [xsltproc])
+ if test "x$XSLTPROC" = "x"; then
+ AC_MSG_WARN([xsltproc not found - cannot transform XML documents])
+ have_xsltproc=no
+ else
+ have_xsltproc=yes
+ fi
+elif test "x$use_xsltproc" = x"yes" ; then
+ AC_PATH_PROG([XSLTPROC], [xsltproc])
+ if test "x$XSLTPROC" = "x"; then
+ AC_MSG_ERROR([--with-xsltproc=yes specified but xsltproc not found in PATH])
+ fi
+ have_xsltproc=yes
+elif test "x$use_xsltproc" = x"no" ; then
+ if test "x$XSLTPROC" != "x"; then
+ AC_MSG_WARN([ignoring XSLTPROC environment variable since --with-xsltproc=no was specified])
+ fi
+ have_xsltproc=no
+else
+ AC_MSG_ERROR([--with-xsltproc expects 'yes' or 'no'])
+fi
+
+AM_CONDITIONAL([HAVE_XSLTPROC], [test "$have_xsltproc" = yes])
+]) # XORG_WITH_XSLTPROC
+
+# XORG_WITH_PERL([MIN-VERSION], [DEFAULT])
+# ----------------------------------------
+# Minimum version: 1.15.0
+#
+# PERL (Practical Extraction and Report Language) is a language optimized for
+# scanning arbitrary text files, extracting information from those text files,
+# and printing reports based on that information.
+#
+# When DEFAULT is not specified, --with-perl assumes 'auto'.
+#
+# Interface to module:
+# HAVE_PERL: used in makefiles to conditionally scan text files
+# PERL: returns the path of the perl program found
+# returns the path set by the user in the environment
+# --with-perl: 'yes' user instructs the module to use perl
+# 'no' user instructs the module not to use perl
+# have_perl: returns yes if perl found in PATH or no
+#
+# If the user sets the value of PERL, AC_PATH_PROG skips testing the path.
+#
+AC_DEFUN([XORG_WITH_PERL],[
+AC_ARG_VAR([PERL], [Path to perl command])
+# Preserves the interface, should it be implemented later
+m4_ifval([$1], [m4_warn([syntax], [Checking for perl MIN-VERSION is not implemented])])
+m4_define([_defopt], m4_default([$2], [auto]))
+AC_ARG_WITH(perl,
+ AS_HELP_STRING([--with-perl],
+ [Use perl for extracting information from files (default: ]_defopt[)]),
+ [use_perl=$withval], [use_perl=]_defopt)
+m4_undefine([_defopt])
+
+if test "x$use_perl" = x"auto"; then
+ AC_PATH_PROG([PERL], [perl])
+ if test "x$PERL" = "x"; then
+ AC_MSG_WARN([perl not found - cannot extract information and report])
+ have_perl=no
+ else
+ have_perl=yes
+ fi
+elif test "x$use_perl" = x"yes" ; then
+ AC_PATH_PROG([PERL], [perl])
+ if test "x$PERL" = "x"; then
+ AC_MSG_ERROR([--with-perl=yes specified but perl not found in PATH])
+ fi
+ have_perl=yes
+elif test "x$use_perl" = x"no" ; then
+ if test "x$PERL" != "x"; then
+ AC_MSG_WARN([ignoring PERL environment variable since --with-perl=no was specified])
+ fi
+ have_perl=no
+else
+ AC_MSG_ERROR([--with-perl expects 'yes' or 'no'])
+fi
+
+AM_CONDITIONAL([HAVE_PERL], [test "$have_perl" = yes])
+]) # XORG_WITH_PERL
+
# XORG_WITH_ASCIIDOC([MIN-VERSION], [DEFAULT])
# ----------------
# Minimum version: 1.5.0
@@ -1707,10 +1812,11 @@ AM_CONDITIONAL([HAVE_GROFF_MM], [test "$groff_mm_works" = yes])
AM_CONDITIONAL([HAVE_GROFF_HTML], [test "$have_groff_html" = yes])
]) # XORG_WITH_GROFF
-# XORG_WITH_FOP([DEFAULT])
-# ----------------
+# XORG_WITH_FOP([MIN-VERSION], [DEFAULT])
+# ---------------------------------------
# Minimum version: 1.6.0
# Minimum version for optional DEFAULT argument: 1.11.0
+# Minimum version for optional MIN-VERSION argument: 1.15.0
#
# Documentation tools are not always available on all platforms and sometimes
# not at the appropriate level. This macro enables a module to test for the
@@ -1730,7 +1836,7 @@ AM_CONDITIONAL([HAVE_GROFF_HTML], [test "$have_groff_html" = yes])
#
AC_DEFUN([XORG_WITH_FOP],[
AC_ARG_VAR([FOP], [Path to fop command])
-m4_define([_defopt], m4_default([$1], [auto]))
+m4_define([_defopt], m4_default([$2], [auto]))
AC_ARG_WITH(fop,
AS_HELP_STRING([--with-fop],
[Use fop to regenerate documentation (default: ]_defopt[)]),
@@ -1759,6 +1865,22 @@ elif test "x$use_fop" = x"no" ; then
else
AC_MSG_ERROR([--with-fop expects 'yes' or 'no'])
fi
+
+# Test for a minimum version of fop, if provided.
+m4_ifval([$1],
+[if test "$have_fop" = yes; then
+ # scrape the fop version
+ AC_MSG_CHECKING([for fop minimum version])
+ fop_version=`$FOP -version 2>/dev/null | cut -d' ' -f3`
+ AC_MSG_RESULT([$fop_version])
+ AS_VERSION_COMPARE([$fop_version], [$1],
+ [if test "x$use_fop" = xauto; then
+ AC_MSG_WARN([fop version $fop_version found, but $1 needed])
+ have_fop=no
+ else
+ AC_MSG_ERROR([fop version $fop_version found, but $1 needed])
+ fi])
+fi])
AM_CONDITIONAL([HAVE_FOP], [test "$have_fop" = yes])
]) # XORG_WITH_FOP
@@ -1841,12 +1963,12 @@ AM_CONDITIONAL([HAVE_PS2PDF], [test "$have_ps2pdf" = yes])
# parm1: specify the default value, yes or no.
#
AC_DEFUN([XORG_ENABLE_DOCS],[
-m4_define([default], m4_default([$1], [yes]))
+m4_define([docs_default], m4_default([$1], [yes]))
AC_ARG_ENABLE(docs,
AS_HELP_STRING([--enable-docs],
- [Enable building the documentation (default: ]default[)]),
- [build_docs=$enableval], [build_docs=]default)
-m4_undefine([default])
+ [Enable building the documentation (default: ]docs_default[)]),
+ [build_docs=$enableval], [build_docs=]docs_default)
+m4_undefine([docs_default])
AM_CONDITIONAL(ENABLE_DOCS, [test x$build_docs = xyes])
AC_MSG_CHECKING([whether to build documentation])
AC_MSG_RESULT([$build_docs])
@@ -1918,6 +2040,194 @@ AC_MSG_CHECKING([whether to build functional specifications])
AC_MSG_RESULT([$build_specs])
]) # XORG_ENABLE_SPECS
+# XORG_ENABLE_UNIT_TESTS (enable_unit_tests=auto)
+# ----------------------------------------------
+# Minimum version: 1.13.0
+#
+# This macro enables a builder to enable/disable unit testing
+# It makes no assumption about the test cases implementation
+# Test cases may or may not use Automake "Support for test suites"
+# They may or may not use the software utility library GLib
+#
+# When used in conjunction with XORG_WITH_GLIB, use both AM_CONDITIONAL
+# ENABLE_UNIT_TESTS and HAVE_GLIB. Not all unit tests may use glib.
+# The variable enable_unit_tests is used by other macros in this file.
+#
+# Interface to module:
+# ENABLE_UNIT_TESTS: used in makefiles to conditionally build tests
+# enable_unit_tests: used in configure.ac for additional configuration
+# --enable-unit-tests: 'yes' user instructs the module to build tests
+# 'no' user instructs the module not to build tests
+# parm1: specify the default value, yes or no.
+#
+AC_DEFUN([XORG_ENABLE_UNIT_TESTS],[
+AC_BEFORE([$0], [XORG_WITH_GLIB])
+AC_BEFORE([$0], [XORG_LD_WRAP])
+m4_define([_defopt], m4_default([$1], [auto]))
+AC_ARG_ENABLE(unit-tests, AS_HELP_STRING([--enable-unit-tests],
+ [Enable building unit test cases (default: ]_defopt[)]),
+ [enable_unit_tests=$enableval], [enable_unit_tests=]_defopt)
+m4_undefine([_defopt])
+AM_CONDITIONAL(ENABLE_UNIT_TESTS, [test "x$enable_unit_tests" != xno])
+AC_MSG_CHECKING([whether to build unit test cases])
+AC_MSG_RESULT([$enable_unit_tests])
+]) # XORG_ENABLE_UNIT_TESTS
+
+# XORG_WITH_GLIB([MIN-VERSION], [DEFAULT])
+# ----------------------------------------
+# Minimum version: 1.13.0
+#
+# GLib is a library which provides advanced data structures and functions.
+# This macro enables a module to test for the presence of Glib.
+#
+# When used with ENABLE_UNIT_TESTS, it is assumed GLib is used for unit testing.
+# Otherwise the value of $enable_unit_tests is blank.
+#
+# Interface to module:
Reply to: