Bug#626262: xserver-xorg-core: MatchIsKeyboard catch touchpad
Cyril Brulebois a écrit :
> Hi again,
>
> Matthieu CASTET <matthieu.castet@parrot.com> (10/05/2011):
>> yes, for checking that X that using these files.
>
> ah, you could have said so.
>
>> With original files I got :
>>
>> [ 6806.157] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
>> (/dev/input/event8)
>> [ 6806.157] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
>> keyboard catchall"
>> [ 6806.157] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
>> [ 6806.157] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
>> [ 6806.160] (**) Option "config_info"
>> "udev:/sys/devices/platform/i8042/serio4/input/input8/event8"
>> [ 6806.160] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics
>> TouchPad" (type: TOUCHPAD)
>>
>> Note that I added to /usr/share/X11/xorg.conf.d/50-synaptics.conf
>> "MatchDevicePath "/dev/input/event*"
>>
>> But that shouldn't affect MatchIsKeyboard behavior.
>
> Anyway, that happens because udev reports:
> | DEVNAME=/dev/input/event8
> | SUBSYSTEM=input
> | ID_INPUT=1
> | ID_INPUT_KEY=1
>
> (see udevadm's output in your initial report)
>
> so it gets detected as a keyboard accordingly (ID_INPUT_KEY leads to
> ATTR_KEYBOARD's being set, see config/udev.c).
>
What's weird is that after rebooting the other mouse is now seen as keyboard
(was pointer before).
[ 6806.156] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/inpu
t/event7)
[ 6806.156] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchal
l"
[ 6806.156] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
vs
[ 910.270] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/inpu
t/event8)
[ 910.270] (**) PS/2 Generic Mouse: Applying InputClass "evdev keyboard catcha
ll"
[ 910.270] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 910.272] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/event9)
[ 910.272] (II) No input driver/identifier specified (ignoring)
but udev seems fine :
UDEV_LOG=6
DEVPATH=/devices/platform/i8042/serio1/input/input8/event8
MAJOR=13
MINOR=72
DEVNAME=/dev/input/event8
ACTION=add
SUBSYSTEM=input
ID_INPUT=1
ID_INPUT_MOUSE=1
.INPUT_CLASS=mouse
ID_SERIAL=noserial
ID_PATH=platform-i8042-serio-1
DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
DMI_VENDOR=Hewlett-Packard
UDEV_LOG=6
DEVPATH=/devices/platform/i8042/serio4/input/input9/event9
MAJOR=13
MINOR=73
DEVNAME=/dev/input/event9
ACTION=add
SUBSYSTEM=input
ID_INPUT=1
ID_INPUT_TOUCHPAD=1
.INPUT_CLASS=mouse
ID_SERIAL=noserial
ID_PATH=platform-i8042-serio-4
DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-event-mouse
DMI_VENDOR=Hewlett-Packard
Matthieu
[ 909.601]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 909.601] X Protocol Version 11, Revision 0
[ 909.601] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 909.601] Current Operating System: Linux pioupiou 2.6.38-2-amd64 #1 SMP Sat Apr 23 20:23:42 UTC 2011 x86_64
[ 909.601] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 root=UUID=547c10a7-c0de-4be7-bfae-e5cb98e7f8bd ro quiet
[ 909.601] Build Date: 01 May 2011 10:14:44AM
[ 909.601] xorg-server 2:1.10.1-2 (Julien Cristau <jcristau@debian.org>)
[ 909.601] Current version of pixman: 0.21.8
[ 909.601] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 909.601] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 909.601] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 10 15:46:00 2011
[ 909.601] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 909.601] (==) No Layout section. Using the first Screen section.
[ 909.601] (==) No screen section available. Using defaults.
[ 909.601] (**) |-->Screen "Default Screen Section" (0)
[ 909.601] (**) | |-->Monitor "<default monitor>"
[ 909.601] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 909.601] (==) Automatically adding devices
[ 909.601] (==) Automatically enabling devices
[ 909.602] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 909.602] Entry deleted from font path.
[ 909.602] (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
[ 909.602] Entry deleted from font path.
[ 909.602] (Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
[ 909.602] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 909.602] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 909.602] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 909.602] (II) Loader magic: 0x8232ac0
[ 909.602] (II) Module ABI versions:
[ 909.602] X.Org ANSI C Emulation: 0.4
[ 909.602] X.Org Video Driver: 10.0
[ 909.602] X.Org XInput driver : 12.2
[ 909.602] X.Org Server Extension : 5.0
[ 909.602] (--) PCI:*(0:0:2:0) 8086:0046:103c:7008 rev 2, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00005058/8
[ 909.603] (II) Open ACPI successful (/var/run/acpid.socket)
[ 909.603] (II) LoadModule: "extmod"
[ 909.603] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 909.603] (II) Module extmod: vendor="X.Org Foundation"
[ 909.603] compiled for 1.10.1, module version = 1.0.0
[ 909.603] Module class: X.Org Server Extension
[ 909.603] ABI class: X.Org Server Extension, version 5.0
[ 909.603] (II) Loading extension SELinux
[ 909.603] (II) Loading extension MIT-SCREEN-SAVER
[ 909.603] (II) Loading extension XFree86-VidModeExtension
[ 909.603] (II) Loading extension XFree86-DGA
[ 909.603] (II) Loading extension DPMS
[ 909.603] (II) Loading extension XVideo
[ 909.603] (II) Loading extension XVideo-MotionCompensation
[ 909.603] (II) Loading extension X-Resource
[ 909.603] (II) LoadModule: "dbe"
[ 909.603] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 909.603] (II) Module dbe: vendor="X.Org Foundation"
[ 909.603] compiled for 1.10.1, module version = 1.0.0
[ 909.603] Module class: X.Org Server Extension
[ 909.603] ABI class: X.Org Server Extension, version 5.0
[ 909.603] (II) Loading extension DOUBLE-BUFFER
[ 909.603] (II) LoadModule: "glx"
[ 909.603] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 909.603] (II) Module glx: vendor="X.Org Foundation"
[ 909.603] compiled for 1.10.1, module version = 1.0.0
[ 909.603] ABI class: X.Org Server Extension, version 5.0
[ 909.603] (==) AIGLX enabled
[ 909.603] (II) Loading extension GLX
[ 909.603] (II) LoadModule: "record"
[ 909.603] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 909.604] (II) Module record: vendor="X.Org Foundation"
[ 909.604] compiled for 1.10.1, module version = 1.13.0
[ 909.604] Module class: X.Org Server Extension
[ 909.604] ABI class: X.Org Server Extension, version 5.0
[ 909.604] (II) Loading extension RECORD
[ 909.604] (II) LoadModule: "dri"
[ 909.604] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 909.604] (II) Module dri: vendor="X.Org Foundation"
[ 909.604] compiled for 1.10.1, module version = 1.0.0
[ 909.604] ABI class: X.Org Server Extension, version 5.0
[ 909.604] (II) Loading extension XFree86-DRI
[ 909.604] (II) LoadModule: "dri2"
[ 909.604] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 909.604] (II) Module dri2: vendor="X.Org Foundation"
[ 909.604] compiled for 1.10.1, module version = 1.2.0
[ 909.604] ABI class: X.Org Server Extension, version 5.0
[ 909.604] (II) Loading extension DRI2
[ 909.604] (==) Matched intel as autoconfigured driver 0
[ 909.604] (==) Matched vesa as autoconfigured driver 1
[ 909.604] (==) Matched fbdev as autoconfigured driver 2
[ 909.604] (==) Assigned the driver to the xf86ConfigLayout
[ 909.604] (II) LoadModule: "intel"
[ 909.604] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 909.604] (II) Module intel: vendor="X.Org Foundation"
[ 909.604] compiled for 1.10.1, module version = 2.15.0
[ 909.604] Module class: X.Org Video Driver
[ 909.604] ABI class: X.Org Video Driver, version 10.0
[ 909.604] (II) LoadModule: "vesa"
[ 909.604] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 909.605] (II) Module vesa: vendor="X.Org Foundation"
[ 909.605] compiled for 1.10.1, module version = 2.3.0
[ 909.605] Module class: X.Org Video Driver
[ 909.605] ABI class: X.Org Video Driver, version 10.0
[ 909.605] (II) LoadModule: "fbdev"
[ 909.605] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 909.605] (II) Module fbdev: vendor="X.Org Foundation"
[ 909.605] compiled for 1.10.1, module version = 0.4.2
[ 909.605] ABI class: X.Org Video Driver, version 10.0
[ 909.605] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 909.605] (II) VESA: driver for VESA chipsets: vesa
[ 909.605] (II) FBDEV: driver for framebuffer: fbdev
[ 909.605] (++) using VT number 9
[ 909.608] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 909.608] (WW) Falling back to old probe method for vesa
[ 909.608] (WW) Falling back to old probe method for fbdev
[ 909.608] (II) Loading sub module "fbdevhw"
[ 909.608] (II) LoadModule: "fbdevhw"
[ 909.609] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 909.609] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 909.609] compiled for 1.10.1, module version = 0.0.2
[ 909.609] ABI class: X.Org Video Driver, version 10.0
[ 909.609] drmOpenDevice: node name is /dev/dri/card0
[ 909.609] drmOpenDevice: open result is 9, (OK)
[ 909.609] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 909.609] drmOpenDevice: node name is /dev/dri/card0
[ 909.609] drmOpenDevice: open result is 9, (OK)
[ 909.609] drmOpenByBusid: drmOpenMinor returns 9
[ 909.609] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 909.609] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 909.609] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 909.609] (==) intel(0): RGB weight 888
[ 909.609] (==) intel(0): Default visual is TrueColor
[ 909.609] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 909.609] (--) intel(0): Chipset: "Arrandale"
[ 909.609] (**) intel(0): Relaxed fencing enabled
[ 909.609] (**) intel(0): Framebuffer tiled
[ 909.609] (**) intel(0): Pixmaps tiled
[ 909.609] (**) intel(0): 3D buffers tiled
[ 909.609] (**) intel(0): SwapBuffers wait enabled
[ 909.609] (==) intel(0): video overlay key set to 0x101fe
[ 909.744] (II) intel(0): Output eDP1 has no monitor section
[ 909.745] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 909.745] (II) intel(0): Output VGA1 has no monitor section
[ 909.749] (II) intel(0): Output HDMI1 has no monitor section
[ 909.750] (II) intel(0): Output DP1 has no monitor section
[ 909.755] (II) intel(0): Output HDMI2 has no monitor section
[ 909.756] (II) intel(0): Output DP2 has no monitor section
[ 909.892] (II) intel(0): EDID for output eDP1
[ 909.892] (II) intel(0): Manufacturer: LGD Model: 24f Serial#: 0
[ 909.892] (II) intel(0): Year: 2010 Week: 0
[ 909.892] (II) intel(0): EDID Version: 1.4
[ 909.892] (II) intel(0): Digital Display Input
[ 909.892] (II) intel(0): Undefined color depth
[ 909.892] (II) intel(0): Digital interface is undefined
[ 909.892] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16
[ 909.892] (II) intel(0): Gamma: 2.20
[ 909.892] (II) intel(0): No DPMS capabilities specified
[ 909.892] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 909.892] (II) intel(0): First detailed timing is preferred mode
[ 909.892] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 909.892] (II) intel(0): redX: 0.592 redY: 0.351 greenX: 0.334 greenY: 0.549
[ 909.892] (II) intel(0): blueX: 0.154 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 909.892] (II) intel(0): Manufacturer's mask: 0
[ 909.892] (II) intel(0): Supported detailed timing:
[ 909.892] (II) intel(0): clock: 69.3 MHz Image Size: 260 x 160 mm
[ 909.892] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0
[ 909.892] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 820 v_border: 0
[ 909.892] (II) intel(0): Supported detailed timing:
[ 909.892] (II) intel(0): clock: 47.2 MHz Image Size: 260 x 160 mm
[ 909.892] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0
[ 909.892] (II) intel(0): v_active: 800 v_sync: 813 v_sync_end 817 v_blanking: 832 v_border: 0
[ 909.892] (II) intel(0): Unknown vendor-specific block 2
[ 909.892] (II) intel(0): EDID (in hex):
[ 909.892] (II) intel(0): 00ffffffffffff0030e44f0200000000
[ 909.892] (II) intel(0): 00140104801a107802ba959759558c27
[ 909.892] (II) intel(0): 21505400000001010101010101010101
[ 909.892] (II) intel(0): 010101010101121b0080502014301820
[ 909.892] (II) intel(0): 440004a0100000187012008050202030
[ 909.892] (II) intel(0): 1820d40004a010000018000000000000
[ 909.892] (II) intel(0): 00000000000000000000000000000002
[ 909.892] (II) intel(0): 000f44e50c3c64181627640000000066
[ 909.892] (II) intel(0): EDID vendor "LGD", prod id 591
[ 909.892] (II) intel(0): Printing DDC gathered Modelines:
[ 909.892] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1304 1336 1408 800 804 808 820 -hsync -vsync (49.2 kHz)
[ 909.892] (II) intel(0): Modeline "1280x800"x0.0 47.20 1280 1304 1336 1408 800 813 817 832 -hsync -vsync (33.5 kHz)
[ 909.893] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 909.893] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 909.893] (II) intel(0): Printing probed modes for output eDP1
[ 909.893] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1304 1336 1408 800 804 808 820 -hsync -vsync (49.2 kHz)
[ 909.893] (II) intel(0): Modeline "1280x800"x40.3 47.20 1280 1304 1336 1408 800 813 817 832 -hsync -vsync (33.5 kHz)
[ 909.893] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 909.893] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 909.893] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 909.893] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 909.893] (II) intel(0): EDID for output VGA1
[ 909.898] (II) intel(0): EDID for output HDMI1
[ 909.899] (II) intel(0): EDID for output DP1
[ 909.903] (II) intel(0): EDID for output HDMI2
[ 909.904] (II) intel(0): EDID for output DP2
[ 909.904] (II) intel(0): Output eDP1 connected
[ 909.904] (II) intel(0): Output VGA1 disconnected
[ 909.904] (II) intel(0): Output HDMI1 disconnected
[ 909.904] (II) intel(0): Output DP1 disconnected
[ 909.904] (II) intel(0): Output HDMI2 disconnected
[ 909.904] (II) intel(0): Output DP2 disconnected
[ 909.904] (II) intel(0): Using exact sizes for initial modes
[ 909.904] (II) intel(0): Output eDP1 using initial mode 1280x800
[ 909.904] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 909.904] (II) intel(0): Kernel page flipping support detected, enabling
[ 909.904] (**) intel(0): Display dimensions: (260, 160) mm
[ 909.904] (**) intel(0): DPI set to (125, 126)
[ 909.904] (II) Loading sub module "fb"
[ 909.904] (II) LoadModule: "fb"
[ 909.905] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 909.905] (II) Module fb: vendor="X.Org Foundation"
[ 909.905] compiled for 1.10.1, module version = 1.0.0
[ 909.905] ABI class: X.Org ANSI C Emulation, version 0.4
[ 909.905] (II) Loading sub module "dri2"
[ 909.905] (II) LoadModule: "dri2"
[ 909.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 909.905] (II) Module dri2: vendor="X.Org Foundation"
[ 909.905] compiled for 1.10.1, module version = 1.2.0
[ 909.905] ABI class: X.Org Server Extension, version 5.0
[ 909.905] (II) UnloadModule: "vesa"
[ 909.905] (II) Unloading vesa
[ 909.905] (II) UnloadModule: "fbdev"
[ 909.905] (II) Unloading fbdev
[ 909.905] (II) UnloadModule: "fbdevhw"
[ 909.905] (II) Unloading fbdevhw
[ 909.905] (==) Depth 24 pixmap format is 32 bpp
[ 909.905] (II) intel(0): [DRI2] Setup complete
[ 909.905] (II) intel(0): [DRI2] DRI driver: i965
[ 909.905] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 909.911] (II) UXA(0): Driver registered support for the following operations:
[ 909.911] (II) solid
[ 909.911] (II) copy
[ 909.911] (II) composite (RENDER acceleration)
[ 909.911] (II) put_image
[ 909.911] (II) get_image
[ 909.911] (==) intel(0): Backing store disabled
[ 909.911] (==) intel(0): Silken mouse enabled
[ 909.911] (II) intel(0): Initializing HW Cursor
[ 909.972] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 909.973] (==) intel(0): DPMS enabled
[ 909.973] (==) intel(0): Intel XvMC decoder enabled
[ 909.973] (II) intel(0): Set up textured video
[ 909.973] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 909.973] (II) intel(0): direct rendering: DRI2 Enabled
[ 909.973] (==) intel(0): hotplug detection: "enabled"
[ 909.973] (--) RandR disabled
[ 909.973] (II) Initializing built-in extension Generic Event Extension
[ 909.973] (II) Initializing built-in extension SHAPE
[ 909.973] (II) Initializing built-in extension MIT-SHM
[ 909.973] (II) Initializing built-in extension XInputExtension
[ 909.973] (II) Initializing built-in extension XTEST
[ 909.973] (II) Initializing built-in extension BIG-REQUESTS
[ 909.973] (II) Initializing built-in extension SYNC
[ 909.973] (II) Initializing built-in extension XKEYBOARD
[ 909.973] (II) Initializing built-in extension XC-MISC
[ 909.973] (II) Initializing built-in extension SECURITY
[ 909.973] (II) Initializing built-in extension XINERAMA
[ 909.973] (II) Initializing built-in extension XFIXES
[ 909.973] (II) Initializing built-in extension RENDER
[ 909.973] (II) Initializing built-in extension RANDR
[ 909.974] (II) Initializing built-in extension COMPOSITE
[ 909.974] (II) Initializing built-in extension DAMAGE
[ 909.974] (II) SELinux: Disabled on system
[ 909.986] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 909.986] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 909.986] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 909.986] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 909.986] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 909.986] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 909.986] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 909.986] (II) intel(0): Setting screen physical size to 338 x 211
[ 910.029] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 910.029] (II) No input driver/identifier specified (ignoring)
[ 910.029] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 910.030] (**) Video Bus: Applying InputClass "evdev touchpad catchall"
[ 910.030] (**) Video Bus: Applying InputClass "touchpad catchall"
[ 910.030] (II) LoadModule: "synaptics"
[ 910.030] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 910.030] (II) Module synaptics: vendor="X.Org Foundation"
[ 910.030] compiled for 1.10.1, module version = 1.4.0
[ 910.030] Module class: X.Org XInput Driver
[ 910.030] ABI class: X.Org XInput driver, version 12.2
[ 910.030] (II) Using input driver 'synaptics' for 'Video Bus'
[ 910.030] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 910.030] (**) Video Bus: always reports core events
[ 910.030] (**) Option "Device" "/dev/input/event10"
[ 910.128] (--) Video Bus: invalid x-axis range. defaulting to 1615 - 5685
[ 910.128] (--) Video Bus: invalid y-axis range. defaulting to 1729 - 4171
[ 910.128] (--) Video Bus: invalid pressure range. defaulting to 0 - 256
[ 910.128] (--) Video Bus: invalid finger width range. defaulting to 0 - 16
[ 910.128] (--) Video Bus: no supported touchpad found
[ 910.128] (EE) Video Bus Unable to query/initialize Synaptics hardware.
[ 910.128] (EE) PreInit returned 11 for "Video Bus"
[ 910.128] (II) UnloadModule: "synaptics"
[ 910.128] (II) Unloading synaptics
[ 910.133] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 910.133] (**) Lid Switch: Applying InputClass "evdev keyboard catchall"
[ 910.133] (II) LoadModule: "evdev"
[ 910.133] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 910.133] (II) Module evdev: vendor="X.Org Foundation"
[ 910.133] compiled for 1.10.1, module version = 2.6.0
[ 910.134] Module class: X.Org XInput Driver
[ 910.134] ABI class: X.Org XInput driver, version 12.2
[ 910.134] (II) Using input driver 'evdev' for 'Lid Switch'
[ 910.134] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 910.134] (**) Lid Switch: always reports core events
[ 910.134] (**) Lid Switch: Device: "/dev/input/event2"
[ 910.134] (WW) Lid Switch: Don't know how to use device
[ 910.134] (EE) PreInit returned 8 for "Lid Switch"
[ 910.134] (II) UnloadModule: "evdev"
[ 910.134] (II) Unloading evdev
[ 910.134] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 910.134] (II) No input driver/identifier specified (ignoring)
[ 910.140] (II) config/udev: Adding input device HP Webcam [2 MP Macro] (/dev/input/event4)
[ 910.140] (**) HP Webcam [2 MP Macro]: Applying InputClass "evdev keyboard catchall"
[ 910.140] (II) Using input driver 'evdev' for 'HP Webcam [2 MP Macro]'
[ 910.140] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 910.140] (**) HP Webcam [2 MP Macro]: always reports core events
[ 910.140] (**) HP Webcam [2 MP Macro]: Device: "/dev/input/event4"
[ 910.140] (--) HP Webcam [2 MP Macro]: Found keys
[ 910.140] (II) HP Webcam [2 MP Macro]: Configuring as keyboard
[ 910.140] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input4/event4"
[ 910.140] (II) XINPUT: Adding extended input device "HP Webcam [2 MP Macro]" (type: KEYBOARD)
[ 910.140] (**) Option "xkb_rules" "evdev"
[ 910.140] (**) Option "xkb_model" "pc105"
[ 910.140] (**) Option "xkb_layout" "fr"
[ 910.140] (**) Option "xkb_variant" "latin9"
[ 910.168] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 910.168] (II) No input driver/identifier specified (ignoring)
[ 910.169] (II) config/udev: Adding input device HDA Intel Line In at Sep Rear Jack (/dev/input/event12)
[ 910.169] (II) No input driver/identifier specified (ignoring)
[ 910.169] (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event13)
[ 910.169] (II) No input driver/identifier specified (ignoring)
[ 910.169] (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event14)
[ 910.169] (II) No input driver/identifier specified (ignoring)
[ 910.169] (II) config/udev: Adding input device HDA Intel HP Out at Sep Rear Jack (/dev/input/event15)
[ 910.169] (**) HDA Intel HP Out at Sep Rear Jack: Applying InputClass "evdev keyboard catchall"
[ 910.169] (II) Using input driver 'evdev' for 'HDA Intel HP Out at Sep Rear Jack'
[ 910.169] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 910.169] (**) HDA Intel HP Out at Sep Rear Jack: always reports core events
[ 910.169] (**) HDA Intel HP Out at Sep Rear Jack: Device: "/dev/input/event15"
[ 910.196] (WW) HDA Intel HP Out at Sep Rear Jack: Don't know how to use device
[ 910.260] (EE) PreInit returned 8 for "HDA Intel HP Out at Sep Rear Jack"
[ 910.260] (II) UnloadModule: "evdev"
[ 910.260] (II) Unloading evdev
[ 910.269] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 910.269] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 910.269] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 910.269] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 910.269] (**) AT Translated Set 2 keyboard: always reports core events
[ 910.269] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 910.269] (--) AT Translated Set 2 keyboard: Found keys
[ 910.269] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 910.269] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 910.269] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 910.269] (**) Option "xkb_rules" "evdev"
[ 910.269] (**) Option "xkb_model" "pc105"
[ 910.269] (**) Option "xkb_layout" "fr"
[ 910.269] (**) Option "xkb_variant" "latin9"
[ 910.270] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event8)
[ 910.270] (**) PS/2 Generic Mouse: Applying InputClass "evdev keyboard catchall"
[ 910.270] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 910.270] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 910.270] (**) PS/2 Generic Mouse: always reports core events
[ 910.270] (**) PS/2 Generic Mouse: Device: "/dev/input/event8"
[ 910.270] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 910.270] (--) PS/2 Generic Mouse: Found relative axes
[ 910.270] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 910.270] (II) PS/2 Generic Mouse: Configuring as mouse
[ 910.270] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 910.271] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 910.271] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 910.271] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
[ 910.271] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 910.271] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 910.271] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 910.271] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 910.271] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 910.271] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[ 910.271] (II) No input driver/identifier specified (ignoring)
[ 910.272] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 910.272] (II) No input driver/identifier specified (ignoring)
[ 910.272] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 910.272] (II) No input driver/identifier specified (ignoring)
[ 910.273] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[ 910.273] (**) ST LIS3LV02DL Accelerometer: Ignoring device from InputClass "no need for accelerometers in X"
[ 910.273] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 910.273] (II) No input driver/identifier specified (ignoring)
[ 910.277] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[ 910.277] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 910.277] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 910.277] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 910.277] (**) HP WMI hotkeys: always reports core events
[ 910.277] (**) HP WMI hotkeys: Device: "/dev/input/event6"
[ 910.277] (--) HP WMI hotkeys: Found keys
[ 910.277] (II) HP WMI hotkeys: Configuring as keyboard
[ 910.277] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[ 910.277] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 910.277] (**) Option "xkb_rules" "evdev"
[ 910.277] (**) Option "xkb_model" "pc105"
[ 910.277] (**) Option "xkb_layout" "fr"
[ 910.277] (**) Option "xkb_variant" "latin9"
[ 910.610] (II) intel(0): EDID vendor "LGD", prod id 591
[ 910.611] (II) intel(0): Printing DDC gathered Modelines:
[ 910.611] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1304 1336 1408 800 804 808 820 -hsync -vsync (49.2 kHz)
[ 910.611] (II) intel(0): Modeline "1280x800"x0.0 47.20 1280 1304 1336 1408 800 813 817 832 -hsync -vsync (33.5 kHz)
[ 910.761] (II) intel(0): EDID vendor "LGD", prod id 591
[ 910.761] (II) intel(0): Printing DDC gathered Modelines:
[ 910.761] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1304 1336 1408 800 804 808 820 -hsync -vsync (49.2 kHz)
[ 910.761] (II) intel(0): Modeline "1280x800"x0.0 47.20 1280 1304 1336 1408 800 813 817 832 -hsync -vsync (33.5 kHz)
[ 910.909] (II) intel(0): EDID vendor "LGD", prod id 591
[ 910.909] (II) intel(0): Printing DDC gathered Modelines:
[ 910.909] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1304 1336 1408 800 804 808 820 -hsync -vsync (49.2 kHz)
[ 910.909] (II) intel(0): Modeline "1280x800"x0.0 47.20 1280 1304 1336 1408 800 813 817 832 -hsync -vsync (33.5 kHz)
Reply to: