--- Begin Message ---
Package: xserver-xorg-input-synaptics
Version: 1.4.0-1
Severity: normal
Since a rencent update (but I cannot really tell if it was the kernel or
the xserver-xorg-input-synaptics package, my touchpad stopped wrking
properly. Vertical scrolling no loner works, and I am not able to change
the touchpad settings.
$ synclient
Couldn't find synaptics properties. No synaptics driver loaded?
gpointing-device-settings actually shows my tocuhpad, but all settings
are to the minimum value and changing them has no effect.
I read in other bug reports with similar issues that they fixed by
reinstalling xserver-xorg-input-synaptics, but it did not help in my
case.
Please let me know if you need durther information.
Thanks,
Ludovico
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 May 13 2010 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1926464 Mar 25 20:49 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 2.6.37-2-amd64 (Debian 2.6.37-2) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-12) ) #1 SMP Sun Feb 27 10:12:22 UTC 2011
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 26625 Apr 27 23:22 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 20.096]
X.Org X Server 1.9.5
Release Date: 2011-03-17
[ 20.096] X Protocol Version 11, Revision 0
[ 20.096] Build Operating System: Linux 2.6.38-1-amd64 x86_64 Debian
[ 20.096] Current Operating System: Linux manfredi 2.6.37-2-amd64 #1 SMP Sun Feb 27 10:12:22 UTC 2011 x86_64
[ 20.096] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-2-amd64 root=/dev/mapper/manfredi-root ro quiet noexec=off noexec32=off
[ 20.096] Build Date: 26 March 2011 03:32:34AM
[ 20.096] xorg-server 2:1.9.5-1 (Cyril Brulebois <kibi@debian.org>)
[ 20.096] Current version of pixman: 0.21.6
[ 20.096] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.096] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.096] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 27 23:20:20 2011
[ 20.138] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 20.170] (==) No Layout section. Using the first Screen section.
[ 20.170] (==) No screen section available. Using defaults.
[ 20.170] (**) |-->Screen "Default Screen Section" (0)
[ 20.170] (**) | |-->Monitor "<default monitor>"
[ 20.170] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 20.170] (==) Automatically adding devices
[ 20.170] (==) Automatically enabling devices
[ 20.358] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 20.358] Entry deleted from font path.
[ 20.397] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 20.397] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.397] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.397] (II) Loader magic: 0x7d1be0
[ 20.397] (II) Module ABI versions:
[ 20.397] X.Org ANSI C Emulation: 0.4
[ 20.397] X.Org Video Driver: 8.0
[ 20.397] X.Org XInput driver : 11.0
[ 20.397] X.Org Server Extension : 4.0
[ 20.398] (--) PCI:*(0:0:2:0) 8086:2a02:103c:30cd rev 12, Mem @ 0xf4000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 20.398] (--) PCI: (0:0:2:1) 8086:2a03:103c:30cd rev 12, Mem @ 0xf4100000/1048576
[ 20.419] (II) Open ACPI successful (/var/run/acpid.socket)
[ 20.419] (II) LoadModule: "extmod"
[ 20.421] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.433] (II) Module extmod: vendor="X.Org Foundation"
[ 20.433] compiled for 1.9.5, module version = 1.0.0
[ 20.433] Module class: X.Org Server Extension
[ 20.433] ABI class: X.Org Server Extension, version 4.0
[ 20.433] (II) Loading extension SELinux
[ 20.433] (II) Loading extension MIT-SCREEN-SAVER
[ 20.433] (II) Loading extension XFree86-VidModeExtension
[ 20.433] (II) Loading extension XFree86-DGA
[ 20.433] (II) Loading extension DPMS
[ 20.433] (II) Loading extension XVideo
[ 20.433] (II) Loading extension XVideo-MotionCompensation
[ 20.433] (II) Loading extension X-Resource
[ 20.433] (II) LoadModule: "dbe"
[ 20.433] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 20.453] (II) Module dbe: vendor="X.Org Foundation"
[ 20.453] compiled for 1.9.5, module version = 1.0.0
[ 20.453] Module class: X.Org Server Extension
[ 20.453] ABI class: X.Org Server Extension, version 4.0
[ 20.453] (II) Loading extension DOUBLE-BUFFER
[ 20.453] (II) LoadModule: "glx"
[ 20.453] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.636] (II) Module glx: vendor="X.Org Foundation"
[ 20.636] compiled for 1.9.5, module version = 1.0.0
[ 20.636] ABI class: X.Org Server Extension, version 4.0
[ 20.636] (==) AIGLX enabled
[ 20.636] (II) Loading extension GLX
[ 20.735] (II) LoadModule: "record"
[ 20.735] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.749] (II) Module record: vendor="X.Org Foundation"
[ 20.749] compiled for 1.9.5, module version = 1.13.0
[ 20.749] Module class: X.Org Server Extension
[ 20.749] ABI class: X.Org Server Extension, version 4.0
[ 20.749] (II) Loading extension RECORD
[ 20.749] (II) LoadModule: "dri"
[ 20.749] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.777] (II) Module dri: vendor="X.Org Foundation"
[ 20.778] compiled for 1.9.5, module version = 1.0.0
[ 20.778] ABI class: X.Org Server Extension, version 4.0
[ 20.778] (II) Loading extension XFree86-DRI
[ 20.778] (II) LoadModule: "dri2"
[ 20.778] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.784] (II) Module dri2: vendor="X.Org Foundation"
[ 20.784] compiled for 1.9.5, module version = 1.2.0
[ 20.784] ABI class: X.Org Server Extension, version 4.0
[ 20.784] (II) Loading extension DRI2
[ 20.785] (==) Matched intel as autoconfigured driver 0
[ 20.785] (==) Matched vesa as autoconfigured driver 1
[ 20.785] (==) Matched fbdev as autoconfigured driver 2
[ 20.785] (==) Assigned the driver to the xf86ConfigLayout
[ 20.785] (II) LoadModule: "intel"
[ 20.794] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 20.853] (II) Module intel: vendor="X.Org Foundation"
[ 20.853] compiled for 1.9.5, module version = 2.15.0
[ 20.853] Module class: X.Org Video Driver
[ 20.853] ABI class: X.Org Video Driver, version 8.0
[ 20.853] (II) LoadModule: "vesa"
[ 20.853] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 20.887] (II) Module vesa: vendor="X.Org Foundation"
[ 20.887] compiled for 1.9.4, module version = 2.3.0
[ 20.887] Module class: X.Org Video Driver
[ 20.887] ABI class: X.Org Video Driver, version 8.0
[ 20.887] (II) LoadModule: "fbdev"
[ 20.888] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 20.890] (II) Module fbdev: vendor="X.Org Foundation"
[ 20.890] compiled for 1.9.4, module version = 0.4.2
[ 20.890] ABI class: X.Org Video Driver, version 8.0
[ 20.890] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 20.890] (II) VESA: driver for VESA chipsets: vesa
[ 20.890] (II) FBDEV: driver for framebuffer: fbdev
[ 20.890] (++) using VT number 7
[ 21.751] (WW) Falling back to old probe method for vesa
[ 21.751] (WW) Falling back to old probe method for fbdev
[ 21.751] (II) Loading sub module "fbdevhw"
[ 21.751] (II) LoadModule: "fbdevhw"
[ 21.751] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 21.827] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 21.827] compiled for 1.9.5, module version = 0.0.2
[ 21.827] ABI class: X.Org Video Driver, version 8.0
[ 21.827] drmOpenDevice: node name is /dev/dri/card0
[ 21.827] drmOpenDevice: open result is 9, (OK)
[ 21.868] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 21.868] drmOpenDevice: node name is /dev/dri/card0
[ 21.868] drmOpenDevice: open result is 9, (OK)
[ 21.868] drmOpenByBusid: drmOpenMinor returns 9
[ 21.868] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 21.868] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 21.868] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 21.868] (==) intel(0): RGB weight 888
[ 21.868] (==) intel(0): Default visual is TrueColor
[ 21.868] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 21.868] (--) intel(0): Chipset: "965GM"
[ 21.868] (**) intel(0): Relaxed fencing disabled
[ 21.868] (**) intel(0): Framebuffer tiled
[ 21.868] (**) intel(0): Pixmaps tiled
[ 21.868] (**) intel(0): 3D buffers tiled
[ 21.868] (**) intel(0): SwapBuffers wait enabled
[ 21.868] (==) intel(0): video overlay key set to 0x101fe
[ 21.899] (II) intel(0): Output LVDS1 has no monitor section
[ 21.900] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 21.916] (II) intel(0): Output VGA1 has no monitor section
[ 22.108] (II) intel(0): Output TV1 has no monitor section
[ 22.108] (II) intel(0): EDID for output LVDS1
[ 22.108] (II) intel(0): Manufacturer: LPL Model: e800 Serial#: 0
[ 22.108] (II) intel(0): Year: 2007 Week: 0
[ 22.108] (II) intel(0): EDID Version: 1.1
[ 22.108] (II) intel(0): Digital Display Input
[ 22.108] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
[ 22.108] (II) intel(0): Gamma: 2.20
[ 22.108] (II) intel(0): No DPMS capabilities specified
[ 22.108] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 22.108] (II) intel(0): First detailed timing is preferred mode
[ 22.108] (II) intel(0): redX: 0.584 redY: 0.347 greenX: 0.323 greenY: 0.542
[ 22.108] (II) intel(0): blueX: 0.157 blueY: 0.145 whiteX: 0.312 whiteY: 0.328
[ 22.108] (II) intel(0): Manufacturer's mask: 0
[ 22.108] (II) intel(0): Supported detailed timing:
[ 22.108] (II) intel(0): clock: 71.0 MHz Image Size: 304 x 190 mm
[ 22.108] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 22.108] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 22.108] (II) intel(0): LGPhilipsLCD
[ 22.108] (II) intel(0): LP141WX3-TLB1
[ 22.108] (II) intel(0): EDID (in hex):
[ 22.108] (II) intel(0): 00ffffffffffff00320c00e800000000
[ 22.108] (II) intel(0): 00110101801e13780abf409558528a28
[ 22.108] (II) intel(0): 25505400000001010101010101010101
[ 22.108] (II) intel(0): 010101010101bc1b00a0502017303020
[ 22.108] (II) intel(0): 360030be100000180000000000000000
[ 22.108] (II) intel(0): 00000000000000000000000000fe004c
[ 22.108] (II) intel(0): 475068696c6970734c43440a000000fe
[ 22.108] (II) intel(0): 004c503134315758332d544c4231006e
[ 22.108] (II) intel(0): EDID vendor "LPL", prod id 59392
[ 22.108] (II) intel(0): Printing DDC gathered Modelines:
[ 22.108] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 22.108] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 22.108] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 22.108] (II) intel(0): Printing probed modes for output LVDS1
[ 22.108] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 22.108] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 22.108] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 22.108] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 22.108] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 22.124] (II) intel(0): EDID for output VGA1
[ 22.316] (II) intel(0): EDID for output TV1
[ 22.316] (II) intel(0): Output LVDS1 connected
[ 22.316] (II) intel(0): Output VGA1 disconnected
[ 22.316] (II) intel(0): Output TV1 disconnected
[ 22.316] (II) intel(0): Using exact sizes for initial modes
[ 22.316] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 22.316] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 22.316] (II) intel(0): Kernel page flipping support detected, enabling
[ 22.316] (**) intel(0): Display dimensions: (300, 190) mm
[ 22.316] (**) intel(0): DPI set to (108, 106)
[ 22.316] (II) Loading sub module "fb"
[ 22.316] (II) LoadModule: "fb"
[ 22.316] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 22.344] (II) Module fb: vendor="X.Org Foundation"
[ 22.344] compiled for 1.9.5, module version = 1.0.0
[ 22.344] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22.344] (II) Loading sub module "dri2"
[ 22.344] (II) LoadModule: "dri2"
[ 22.344] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.344] (II) UnloadModule: "vesa"
[ 22.344] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 22.344] (II) UnloadModule: "fbdev"
[ 22.344] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 22.344] (II) UnloadModule: "fbdevhw"
[ 22.344] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
[ 22.344] (==) Depth 24 pixmap format is 32 bpp
[ 22.344] (II) intel(0): [DRI2] Setup complete
[ 22.344] (II) intel(0): [DRI2] DRI driver: i965
[ 22.344] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 22.460] (II) UXA(0): Driver registered support for the following operations:
[ 22.460] (II) solid
[ 22.460] (II) copy
[ 22.460] (II) composite (RENDER acceleration)
[ 22.460] (II) put_image
[ 22.460] (II) get_image
[ 22.460] (==) intel(0): Backing store disabled
[ 22.460] (==) intel(0): Silken mouse enabled
[ 22.460] (II) intel(0): Initializing HW Cursor
[ 22.468] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 22.474] (==) intel(0): DPMS enabled
[ 22.474] (==) intel(0): Intel XvMC decoder enabled
[ 22.474] (II) intel(0): Set up textured video
[ 22.474] (II) intel(0): Set up overlay video
[ 22.474] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 22.474] (II) intel(0): direct rendering: DRI2 Enabled
[ 22.474] (==) intel(0): hotplug detection: "enabled"
[ 22.474] (--) RandR disabled
[ 22.474] (II) Initializing built-in extension Generic Event Extension
[ 22.474] (II) Initializing built-in extension SHAPE
[ 22.474] (II) Initializing built-in extension MIT-SHM
[ 22.474] (II) Initializing built-in extension XInputExtension
[ 22.474] (II) Initializing built-in extension XTEST
[ 22.474] (II) Initializing built-in extension BIG-REQUESTS
[ 22.474] (II) Initializing built-in extension SYNC
[ 22.474] (II) Initializing built-in extension XKEYBOARD
[ 22.474] (II) Initializing built-in extension XC-MISC
[ 22.474] (II) Initializing built-in extension SECURITY
[ 22.474] (II) Initializing built-in extension XINERAMA
[ 22.474] (II) Initializing built-in extension XFIXES
[ 22.474] (II) Initializing built-in extension RENDER
[ 22.474] (II) Initializing built-in extension RANDR
[ 22.474] (II) Initializing built-in extension COMPOSITE
[ 22.474] (II) Initializing built-in extension DAMAGE
[ 22.474] (II) SELinux: Disabled on system
[ 22.742] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 22.742] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 22.742] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 22.742] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 22.742] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 22.742] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 22.742] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 22.743] (II) intel(0): Setting screen physical size to 338 x 211
[ 23.825] (II) config/udev: Adding input device Power Button (/dev/input/event8)
[ 23.825] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.825] (II) LoadModule: "evdev"
[ 23.825] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.869] (II) Module evdev: vendor="X.Org Foundation"
[ 23.869] compiled for 1.9.4, module version = 2.6.0
[ 23.869] Module class: X.Org XInput Driver
[ 23.869] ABI class: X.Org XInput driver, version 11.0
[ 23.869] (**) Power Button: always reports core events
[ 23.869] (**) Power Button: Device: "/dev/input/event8"
[ 23.869] (--) Power Button: Found keys
[ 23.869] (II) Power Button: Configuring as keyboard
[ 23.869] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 23.869] (**) Option "xkb_rules" "evdev"
[ 23.869] (**) Option "xkb_model" "pc105"
[ 23.869] (**) Option "xkb_layout" "it"
[ 23.869] (**) Option "xkb_options" "compose:menu,terminate:ctrl_alt_bksp"
[ 24.049] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 24.049] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 24.049] (**) Video Bus: always reports core events
[ 24.049] (**) Video Bus: Device: "/dev/input/event9"
[ 24.064] (--) Video Bus: Found keys
[ 24.064] (II) Video Bus: Configuring as keyboard
[ 24.064] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 24.064] (**) Option "xkb_rules" "evdev"
[ 24.064] (**) Option "xkb_model" "pc105"
[ 24.064] (**) Option "xkb_layout" "it"
[ 24.064] (**) Option "xkb_options" "compose:menu,terminate:ctrl_alt_bksp"
[ 24.090] (II) config/udev: Adding input device Lid Switch (/dev/input/event6)
[ 24.090] (II) No input driver/identifier specified (ignoring)
[ 24.093] (II) config/udev: Adding input device Sleep Button (/dev/input/event7)
[ 24.093] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 24.093] (**) Sleep Button: always reports core events
[ 24.093] (**) Sleep Button: Device: "/dev/input/event7"
[ 24.093] (--) Sleep Button: Found keys
[ 24.093] (II) Sleep Button: Configuring as keyboard
[ 24.093] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 24.093] (**) Option "xkb_rules" "evdev"
[ 24.093] (**) Option "xkb_model" "pc105"
[ 24.093] (**) Option "xkb_layout" "it"
[ 24.093] (**) Option "xkb_options" "compose:menu,terminate:ctrl_alt_bksp"
[ 24.115] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 24.115] (**) HDA Digital PCBeep: Applying InputClass "evdev keyboard catchall"
[ 24.115] (**) HDA Digital PCBeep: always reports core events
[ 24.115] (**) HDA Digital PCBeep: Device: "/dev/input/event3"
[ 24.116] (WW) HDA Digital PCBeep: Don't know how to use device
[ 24.120] (II) UnloadModule: "evdev"
[ 24.120] (EE) PreInit returned NULL for "HDA Digital PCBeep"
[ 24.183] (II) config/udev: Adding input device HP Webcam (/dev/input/event4)
[ 24.183] (**) HP Webcam: Applying InputClass "evdev pointer catchall"
[ 24.183] (**) HP Webcam: always reports core events
[ 24.183] (**) HP Webcam: Device: "/dev/input/event4"
[ 24.184] (--) HP Webcam: Found keys
[ 24.184] (II) HP Webcam: Configuring as keyboard
[ 24.184] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD)
[ 24.184] (**) Option "xkb_rules" "evdev"
[ 24.184] (**) Option "xkb_model" "evdev"
[ 24.184] (**) Option "xkb_layout" "us"
[ 24.347] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 24.347] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.347] (**) AT Translated Set 2 keyboard: always reports core events
[ 24.347] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 24.360] (--) AT Translated Set 2 keyboard: Found keys
[ 24.360] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 24.360] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 24.360] (**) Option "xkb_rules" "evdev"
[ 24.360] (**) Option "xkb_model" "pc105"
[ 24.360] (**) Option "xkb_layout" "it"
[ 24.360] (**) Option "xkb_options" "compose:menu,terminate:ctrl_alt_bksp"
[ 24.497] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event1)
[ 24.497] (II) No input driver/identifier specified (ignoring)
[ 24.498] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[ 24.498] (II) No input driver/identifier specified (ignoring)
[ 24.500] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event2)
[ 24.500] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev keyboard catchall"
[ 24.500] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 24.500] (**) AlpsPS/2 ALPS GlidePoint: Device: "/dev/input/event2"
[ 24.500] (--) AlpsPS/2 ALPS GlidePoint: Found 3 mouse buttons
[ 24.500] (--) AlpsPS/2 ALPS GlidePoint: Found absolute axes
[ 24.500] (--) AlpsPS/2 ALPS GlidePoint: Found x and y absolute axes
[ 24.500] (--) AlpsPS/2 ALPS GlidePoint: Found absolute touchpad.
[ 24.500] (II) AlpsPS/2 ALPS GlidePoint: Configuring as touchpad
[ 24.500] (**) AlpsPS/2 ALPS GlidePoint: YAxisMapping: buttons 4 and 5
[ 24.500] (**) AlpsPS/2 ALPS GlidePoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.500] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[ 24.500] (II) AlpsPS/2 ALPS GlidePoint: initialized for absolute axes.
[ 24.501] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 24.501] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 24.501] (II) LoadModule: "synaptics"
[ 24.501] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 24.508] (II) Module synaptics: vendor="X.Org Foundation"
[ 24.508] compiled for 1.9.4, module version = 1.4.0
[ 24.508] Module class: X.Org XInput Driver
[ 24.508] ABI class: X.Org XInput driver, version 11.0
[ 24.508] (**) Option "Device" "/dev/input/mouse1"
[ 24.512] (--) AlpsPS/2 ALPS GlidePoint: invalid x-axis range. defaulting to 1615 - 5685
[ 24.512] (--) AlpsPS/2 ALPS GlidePoint: invalid y-axis range. defaulting to 1729 - 4171
[ 24.512] (--) AlpsPS/2 ALPS GlidePoint: invalid pressure range. defaulting to 0 - 256
[ 24.512] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 24.532] (EE) Query no Synaptics: 6003C8
[ 24.532] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
[ 24.532] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
[ 24.532] (EE) PreInit returned NULL for "AlpsPS/2 ALPS GlidePoint"
[ 24.655] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event5)
[ 24.655] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev touchpad catchall"
[ 24.655] (**) ACPI Virtual Keyboard Device: Applying InputClass "touchpad catchall"
[ 24.655] (**) Option "Device" "/dev/input/event5"
[ 24.661] (--) ACPI Virtual Keyboard Device: invalid x-axis range. defaulting to 1615 - 5685
[ 24.661] (--) ACPI Virtual Keyboard Device: invalid y-axis range. defaulting to 1729 - 4171
[ 24.661] (--) ACPI Virtual Keyboard Device: invalid pressure range. defaulting to 0 - 256
[ 24.661] (--) ACPI Virtual Keyboard Device: invalid finger width range. defaulting to 0 - 16
[ 24.661] (--) ACPI Virtual Keyboard Device: no supported touchpad found
[ 24.661] (EE) ACPI Virtual Keyboard Device Unable to query/initialize Synaptics hardware.
[ 24.661] (EE) PreInit returned NULL for "ACPI Virtual Keyboard Device"
[ 165.064] (II) intel(0): EDID vendor "LPL", prod id 59392
[ 165.064] (II) intel(0): Printing DDC gathered Modelines:
[ 165.064] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 165.282] (II) intel(0): EDID vendor "LPL", prod id 59392
[ 165.282] (II) intel(0): Printing DDC gathered Modelines:
[ 165.282] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 165.553] (II) intel(0): EDID vendor "LPL", prod id 59392
[ 165.553] (II) intel(0): Printing DDC gathered Modelines:
[ 165.553] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 168.578] (II) intel(0): EDID vendor "LPL", prod id 59392
[ 168.578] (II) intel(0): Printing DDC gathered Modelines:
[ 168.578] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
[ 175.245] (II) intel(0): EDID vendor "LPL", prod id 59392
[ 175.245] (II) intel(0): Printing DDC gathered Modelines:
[ 175.245] (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
udev information:
-----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event8
N: input/event8
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=it
E: XKBOPTIONS=compose:menu,terminate:ctrl_alt_bksp
E: BACKSPACE=guess
E: DMI_VENDOR=Hewlett-Packard
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9/event9
N: input/event9
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=it
E: XKBOPTIONS=compose:menu,terminate:ctrl_alt_bksp
E: BACKSPACE=guess
E: DMI_VENDOR=Hewlett-Packard
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6/event6
N: input/event6
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Hewlett-Packard
P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7/event7
N: input/event7
S: input/by-id/usb-Chicony_Electronics_Co.__Ltd._HP_Webcam_SN0001-event-if00
S: input/by-path/pci-0000:00:1d.7-usb-0:5:1.0-event
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Chicony_Electronics_Co.__Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2c\x20Ltd.
E: ID_VENDOR_ID=04f2
E: ID_MODEL=HP_Webcam
E: ID_MODEL_ENC=HP\x20Webcam
E: ID_MODEL_ID=b016
E: ID_REVISION=0604
E: ID_SERIAL=Chicony_Electronics_Co.__Ltd._HP_Webcam_SN0001
E: ID_SERIAL_SHORT=SN0001
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1d.7-usb-0:5:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=it
E: XKBOPTIONS=compose:menu,terminate:ctrl_alt_bksp
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-id/usb-Chicony_Electronics_Co.__Ltd._HP_Webcam_SN0001-event-if00 /dev/input/by-path/pci-0000:00:1d.7-usb-0:5:1.0-event
P: /devices/pci0000:00/0000:00:1b.0/input/input3/event3
N: input/event3
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=it
E: XKBOPTIONS=compose:menu,terminate:ctrl_alt_bksp
E: BACKSPACE=guess
E: DMI_VENDOR=Hewlett-Packard
P: /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input4/event4
N: input/event4
S: input/by-path/platform-i8042-serio-4-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-event-mouse
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=it
E: XKBOPTIONS=compose:menu,terminate:ctrl_alt_bksp
E: BACKSPACE=guess
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
P: /devices/platform/i8042/serio4/input/input1/event1
N: input/event1
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=Hewlett-Packard
P: /devices/platform/i8042/serio4/input/input1/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-4-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/input/input1/mouse0
E: MAJOR=13
E: MINOR=32
E: DEVNAME=/dev/input/mouse0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-mouse
P: /devices/platform/i8042/serio4/input/input2/event2
N: input/event2
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=it
E: XKBOPTIONS=compose:menu,terminate:ctrl_alt_bksp
E: BACKSPACE=guess
E: DMI_VENDOR=Hewlett-Packard
P: /devices/platform/i8042/serio4/input/input2/mouse1
N: input/mouse1
S: input/by-path/platform-i8042-serio-4-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/input/input2/mouse1
E: MAJOR=13
E: MINOR=33
E: DEVNAME=/dev/input/mouse1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-mouse
P: /devices/virtual/input/input5/event5
N: input/event5
S: input/by-path/platform-i8042-serio-4-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-event-mouse
DRM Information from dmesg:
---------------------------
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.542225] Linux agpgart interface v0.103
[ 0.542316] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.542410] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.543617] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.548459] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 21.084750] [drm] Initialized drm 1.1.0 20060810
[ 21.228907] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 21.283957] [drm] initialized overlay support
[ 21.729906] fb0: inteldrmfb frame buffer device
[ 21.729908] drm: registered panic notifier
[ 21.749646] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.868056] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (900, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.37-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-input-synaptics depends on:
ii libc6 2.11.2-13 Embedded GNU C Library: Shared lib
ii libx11-6 2:1.4.3-1 X11 client-side library
ii libxi6 2:1.4.2-1 X11 Input extension library
ii libxtst6 2:1.2.0-1 X11 Testing -- Record extension li
ii xserver-xorg-core [xorg-input 2:1.9.5-1 Xorg X server - core server
xserver-xorg-input-synaptics recommends no packages.
Versions of packages xserver-xorg-input-synaptics suggests:
ii gpointing-device-settings 1.5.1-4 configuration tool for pointing de
pn touchfreeze <none> (no description available)
-- no debconf information
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37-2-amd64 (Debian 2.6.37-2) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-12) ) #1 SMP Sun Feb 27 10:12:22 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-2-amd64 root=/dev/mapper/manfredi-root ro quiet noexec=off noexec32=off
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6c0000 (usable)
[ 0.000000] BIOS-e820: 00000000bf6c0000 - 00000000bf6df000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6df000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: disabled by kernel command line option
[ 0.000000] DMI present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv2500 Notebook PC/30CD, BIOS F.2E 12/01/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-D3FFF uncachable
[ 0.000000] D4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf6c0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f7e50] f7e50
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6c0000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf6c0000 page 4k
[ 0.000000] kernel direct mapping tables up to bf6c0000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ bf6ba000-bf6c0000
[ 0.000000] RAMDISK: 36bd8000 - 375e4000
[ 0.000000] ACPI: RSDP 00000000000f7e20 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000bf6cff0e 0007C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bf6dbc3a 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bf6d0f4f 0AC77 (v02 INTEL CRESTLNE 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bf6defc0 00040
[ 0.000000] ACPI: HPET 00000000bf6dbd2e 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bf6dbd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 00000000bf6dbda2 00032 (v01 Intel CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: TMOR 00000000bf6dbdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: SLIC 00000000bf6dbdfa 00176 (v01 HPQOEM SLIC-MPC 06040000 HPQ 00000001)
[ 0.000000] ACPI: APIC 00000000bf6dbf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bf6dbfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bf6d0c72 002DD (v01 SataRe SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf6d0ad5 0019D (v01 BrtRef DD01BRT 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf6cff8a 004E6 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf6c0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1046095
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765688 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf6c0000 - 00000000bf6df000
[ 0.000000] PM: Registered nosave memory: 00000000bf6df000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bf400000 s82688 r8192 d23808 u1048576
[ 0.000000] pcpu-alloc: s82688 r8192 d23808 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028169
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37-2-amd64 root=/dev/mapper/manfredi-root ro quiet noexec=off noexec32=off
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4041992k/5242880k available (3227k kernel code, 1058500k absent, 142388k reserved, 3441k data, 608k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.513 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.02 BogoMIPS (lpj=7978052)
[ 0.004013] pid_max: default: 32768 minimum: 301
[ 0.004035] Security Framework initialized
[ 0.004041] SELinux: Disabled at boot.
[ 0.008086] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010489] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011665] Mount-cache hash table entries: 256
[ 0.011836] Initializing cgroup subsys ns
[ 0.011841] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.011844] Initializing cgroup subsys cpuacct
[ 0.011848] Initializing cgroup subsys devices
[ 0.011850] Initializing cgroup subsys freezer
[ 0.011852] Initializing cgroup subsys net_cls
[ 0.011855] Initializing cgroup subsys blkio
[ 0.011898] CPU: Physical Processor ID: 0
[ 0.011900] CPU: Processor Core ID: 0
[ 0.011903] mce: CPU supports 6 MCE banks
[ 0.011911] CPU0: Thermal monitoring handled by SMI
[ 0.011916] using mwait in idle threads.
[ 0.011917] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.011923] PEBS disabled due to CPU errata.
[ 0.011927] ... version: 2
[ 0.011929] ... bit width: 40
[ 0.011930] ... generic registers: 2
[ 0.011932] ... value mask: 000000ffffffffff
[ 0.011934] ... max period: 000000007fffffff
[ 0.011935] ... fixed-purpose events: 3
[ 0.011937] ... event mask: 0000000700000003
[ 0.012907] ACPI: Core revision 20101013
[ 0.024067] Setting APIC routing to flat
[ 0.024419] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065421] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 0.068000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068000] Booting Node 0, Processors #1 Ok.
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.156026] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156065] Brought up 2 CPUs
[ 0.156068] Total of 2 processors activated (7979.00 BogoMIPS).
[ 0.156725] devtmpfs: initialized
[ 0.160155] regulator: core version 0.5
[ 0.160164] regulator: dummy:
[ 0.160205] NET: Registered protocol family 16
[ 0.160312] ACPI: bus type pci registered
[ 0.160405] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.160409] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.186718] PCI: Using configuration type 1 for base access
[ 0.187116] bio: create slab <bio-0> at 0
[ 0.188760] ACPI: EC: Look up EC in DSDT
[ 0.192549] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.193719] ACPI: SSDT 00000000bf6d0793 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.194045] ACPI: Dynamic OEM Table Load:
[ 0.194048] ACPI: SSDT (null) 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.194248] ACPI: SSDT 00000000bf6d0470 0029E (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.194554] ACPI: Dynamic OEM Table Load:
[ 0.194557] ACPI: SSDT (null) 0029E (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.194926] ACPI: SSDT 00000000bf6d0a0d 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
[ 0.195242] ACPI: Dynamic OEM Table Load:
[ 0.195245] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
[ 0.195386] ACPI: SSDT 00000000bf6d070e 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 0.195692] ACPI: Dynamic OEM Table Load:
[ 0.195695] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 0.200123] ACPI: Interpreter enabled
[ 0.200126] ACPI: (supports S0 S3 S4 S5)
[ 0.200146] ACPI: Using IOAPIC for interrupt routing
[ 0.216060] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.216240] ACPI: No dock devices found.
[ 0.216244] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.217077] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.218172] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.218175] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.218178] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.218181] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.218184] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.218187] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.218189] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.218192] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.218195] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.218209] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.218254] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
[ 0.218268] pci 0000:00:02.0: reg 10: [mem 0xf4000000-0xf40fffff 64bit]
[ 0.218277] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.218284] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.218322] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
[ 0.218334] pci 0000:00:02.1: reg 10: [mem 0xf4100000-0xf41fffff 64bit]
[ 0.218423] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.218482] pci 0000:00:1a.0: reg 20: [io 0x1840-0x185f]
[ 0.218525] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.218584] pci 0000:00:1a.1: reg 20: [io 0x1860-0x187f]
[ 0.218642] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.218668] pci 0000:00:1a.7: reg 10: [mem 0xf4705c00-0xf4705fff]
[ 0.218761] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.218767] pci 0000:00:1a.7: PME# disabled
[ 0.218797] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.218820] pci 0000:00:1b.0: reg 10: [mem 0xf4500000-0xf4503fff 64bit]
[ 0.218907] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.218912] pci 0000:00:1b.0: PME# disabled
[ 0.218941] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.219031] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.219036] pci 0000:00:1c.0: PME# disabled
[ 0.219068] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.219158] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.219163] pci 0000:00:1c.1: PME# disabled
[ 0.219194] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
[ 0.219283] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.219288] pci 0000:00:1c.2: PME# disabled
[ 0.219321] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[ 0.219411] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.219416] pci 0000:00:1c.3: PME# disabled
[ 0.219449] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.219508] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
[ 0.219550] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.219609] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
[ 0.219651] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.219710] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
[ 0.219765] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.219791] pci 0000:00:1d.7: reg 10: [mem 0xf4706000-0xf47063ff]
[ 0.219887] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.219893] pci 0000:00:1d.7: PME# disabled
[ 0.219917] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.220014] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.220122] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.220127] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.220134] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1200 (mask 0007)
[ 0.220178] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.220197] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.220210] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.220222] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.220235] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.220247] pci 0000:00:1f.1: reg 20: [io 0x1830-0x183f]
[ 0.220304] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.220332] pci 0000:00:1f.2: reg 10: [io 0x18f8-0x18ff]
[ 0.220344] pci 0000:00:1f.2: reg 14: [io 0x18ec-0x18ef]
[ 0.220357] pci 0000:00:1f.2: reg 18: [io 0x18f0-0x18f7]
[ 0.220369] pci 0000:00:1f.2: reg 1c: [io 0x18e8-0x18eb]
[ 0.220381] pci 0000:00:1f.2: reg 20: [io 0x1c00-0x1c1f]
[ 0.220393] pci 0000:00:1f.2: reg 24: [mem 0xf4705000-0xf47057ff]
[ 0.220443] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.220448] pci 0000:00:1f.2: PME# disabled
[ 0.220470] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.220488] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.220532] pci 0000:00:1f.3: reg 20: [io 0x1c20-0x1c3f]
[ 0.220632] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.220637] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.220643] pci 0000:00:1c.0: bridge window [mem 0xf2000000-0xf3ffffff]
[ 0.220651] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.220744] pci 0000:05:00.0: [11ab:4353] type 0 class 0x000200
[ 0.220777] pci 0000:05:00.0: reg 10: [mem 0xf4200000-0xf4203fff 64bit]
[ 0.220795] pci 0000:05:00.0: reg 18: [io 0x3000-0x30ff]
[ 0.220913] pci 0000:05:00.0: supports D1 D2
[ 0.220915] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220921] pci 0000:05:00.0: PME# disabled
[ 0.220940] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.220954] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[ 0.220959] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.220964] pci 0000:00:1c.1: bridge window [mem 0xf4200000-0xf42fffff]
[ 0.220972] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.221036] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 0.221042] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 0.221048] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.221056] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.221180] pci 0000:07:00.0: [8086:4222] type 0 class 0x000280
[ 0.221235] pci 0000:07:00.0: reg 10: [mem 0xf4300000-0xf4300fff]
[ 0.221575] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.221588] pci 0000:07:00.0: PME# disabled
[ 0.221659] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.221687] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
[ 0.221692] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
[ 0.221698] pci 0000:00:1c.3: bridge window [mem 0xf4300000-0xf43fffff]
[ 0.221706] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.221768] pci 0000:08:09.0: [1180:0832] type 0 class 0x000c00
[ 0.221792] pci 0000:08:09.0: reg 10: [mem 0xf4400000-0xf44007ff]
[ 0.221882] pci 0000:08:09.0: supports D1 D2
[ 0.221885] pci 0000:08:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221890] pci 0000:08:09.0: PME# disabled
[ 0.221912] pci 0000:08:09.1: [1180:0822] type 0 class 0x000805
[ 0.221936] pci 0000:08:09.1: reg 10: [mem 0xf4400800-0xf44008ff]
[ 0.222026] pci 0000:08:09.1: supports D1 D2
[ 0.222028] pci 0000:08:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222033] pci 0000:08:09.1: PME# disabled
[ 0.222055] pci 0000:08:09.2: [1180:0592] type 0 class 0x000880
[ 0.222078] pci 0000:08:09.2: reg 10: [mem 0xf4400c00-0xf4400cff]
[ 0.222168] pci 0000:08:09.2: supports D1 D2
[ 0.222170] pci 0000:08:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222175] pci 0000:08:09.2: PME# disabled
[ 0.222197] pci 0000:08:09.3: [1180:0852] type 0 class 0x000880
[ 0.222220] pci 0000:08:09.3: reg 10: [mem 0xf4401000-0xf44010ff]
[ 0.222310] pci 0000:08:09.3: supports D1 D2
[ 0.222312] pci 0000:08:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222318] pci 0000:08:09.3: PME# disabled
[ 0.222370] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 0.222375] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.222381] pci 0000:00:1e.0: bridge window [mem 0xf4400000-0xf44fffff]
[ 0.222390] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.222393] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.222396] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.222399] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.222402] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.222405] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.222408] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.222411] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.222414] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.222416] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.222453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.222689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.222747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.222804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.222860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.222940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.228736] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.228804] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.228872] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.228936] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.229001] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.229066] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.229130] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.229197] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.229228] HEST: Table is not found!
[ 0.229287] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.229304] vgaarb: loaded
[ 0.229319] PCI: Using ACPI for IRQ routing
[ 0.229319] PCI: pci_cache_line_size set to 64 bytes
[ 0.229319] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.229319] reserve RAM buffer: 00000000bf6c0000 - 00000000bfffffff
[ 0.229319] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.229319] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.229319] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.232020] Switching to clocksource tsc
[ 0.233308] pnp: PnP ACPI init
[ 0.233326] ACPI: bus type pnp registered
[ 0.233889] pnp 00:00: [bus 00-ff]
[ 0.233892] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.233894] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.233897] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.233899] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.233901] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.233904] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.233906] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.233909] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.233911] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.233913] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.233916] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.233918] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.233921] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.233923] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.233925] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.233928] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.233930] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.233933] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.233935] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.233937] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.233998] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.234146] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.234148] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.234151] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.234153] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.234155] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.234157] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.234159] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.234216] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.235542] pnp 00:02: [io 0x0060]
[ 0.235545] pnp 00:02: [io 0x0064]
[ 0.235554] pnp 00:02: [irq 1]
[ 0.235601] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.235618] pnp 00:03: [irq 12]
[ 0.235672] pnp 00:03: Plug and Play ACPI device, IDs AUI1500 SYN0300 SYN0002 PNP0f13 (active)
[ 0.235683] pnp 00:04: [io 0x0000-0x001f]
[ 0.235685] pnp 00:04: [io 0x0081-0x0091]
[ 0.235687] pnp 00:04: [io 0x0093-0x009f]
[ 0.235689] pnp 00:04: [io 0x00c0-0x00df]
[ 0.235691] pnp 00:04: [dma 4]
[ 0.235738] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.235747] pnp 00:05: [mem 0xff000000-0xffffffff]
[ 0.235796] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.235895] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.235963] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.235975] pnp 00:07: [io 0x00f0]
[ 0.235981] pnp 00:07: [irq 13]
[ 0.236031] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.236043] pnp 00:08: [io 0x002e-0x002f]
[ 0.236045] pnp 00:08: [io 0x004e-0x004f]
[ 0.236047] pnp 00:08: [io 0x0061]
[ 0.236049] pnp 00:08: [io 0x0063]
[ 0.236051] pnp 00:08: [io 0x0065]
[ 0.236053] pnp 00:08: [io 0x0067]
[ 0.236055] pnp 00:08: [io 0x0070]
[ 0.236057] pnp 00:08: [io 0x0080]
[ 0.236058] pnp 00:08: [io 0x0092]
[ 0.236060] pnp 00:08: [io 0x00b2-0x00b3]
[ 0.236062] pnp 00:08: [io 0x0680-0x069f]
[ 0.236064] pnp 00:08: [io 0x0800-0x080f]
[ 0.236066] pnp 00:08: [io 0x1000-0x107f]
[ 0.236068] pnp 00:08: [io 0x1180-0x11bf]
[ 0.236070] pnp 00:08: [io 0xfe00]
[ 0.236151] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.236161] pnp 00:09: [io 0x0070-0x0077]
[ 0.236167] pnp 00:09: [irq 8]
[ 0.236218] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.236242] pnp: PnP ACPI: found 10 devices
[ 0.236244] ACPI: ACPI bus type pnp unregistered
[ 0.236253] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.236257] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.236260] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.236263] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.236266] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.236269] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.236272] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.236279] system 00:06: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.236285] system 00:08: [io 0x0680-0x069f] has been reserved
[ 0.236288] system 00:08: [io 0x0800-0x080f] has been reserved
[ 0.236291] system 00:08: [io 0x1000-0x107f] has been reserved
[ 0.236294] system 00:08: [io 0x1180-0x11bf] has been reserved
[ 0.236297] system 00:08: [io 0xfe00] has been reserved
[ 0.242975] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.242980] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0200000-0xc03fffff]
[ 0.242985] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.242990] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.242994] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.242999] pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.243003] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0800000-0xc08000ff]
[ 0.243010] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0800000-0xc08000ff] (PCI address [0xc0800000-0xc08000ff])
[ 0.243014] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.243018] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.243025] pci 0000:00:1c.0: bridge window [mem 0xf2000000-0xf3ffffff]
[ 0.243030] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.243039] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[ 0.243042] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.243048] pci 0000:00:1c.1: bridge window [mem 0xf4200000-0xf42fffff]
[ 0.243053] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.243062] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 0.243065] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.243072] pci 0000:00:1c.2: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.243077] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.243086] pci 0000:00:1c.3: PCI bridge to [bus 07-07]
[ 0.243089] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.243096] pci 0000:00:1c.3: bridge window [mem 0xf4300000-0xf43fffff]
[ 0.243101] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.243110] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 0.243112] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.243118] pci 0000:00:1e.0: bridge window [mem 0xf4400000-0xf44fffff]
[ 0.243123] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.243142] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.243148] pci 0000:00:1c.0: setting latency timer to 64
[ 0.243158] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.243162] pci 0000:00:1c.1: setting latency timer to 64
[ 0.243171] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.243176] pci 0000:00:1c.2: setting latency timer to 64
[ 0.243186] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.243190] pci 0000:00:1c.3: setting latency timer to 64
[ 0.243199] pci 0000:00:1e.0: setting latency timer to 64
[ 0.243203] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.243205] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.243208] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.243210] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.243213] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.243215] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.243218] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.243220] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xdfffffff]
[ 0.243223] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfebfffff]
[ 0.243226] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.243228] pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf3ffffff]
[ 0.243231] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.243233] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.243236] pci_bus 0000:05: resource 1 [mem 0xf4200000-0xf42fffff]
[ 0.243238] pci_bus 0000:05: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.243241] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.243243] pci_bus 0000:06: resource 1 [mem 0xc0200000-0xc03fffff]
[ 0.243246] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.243249] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
[ 0.243251] pci_bus 0000:07: resource 1 [mem 0xf4300000-0xf43fffff]
[ 0.243254] pci_bus 0000:07: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.243256] pci_bus 0000:08: resource 1 [mem 0xf4400000-0xf44fffff]
[ 0.243259] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 0.243261] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 0.243264] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.243266] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.243269] pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.243271] pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.243273] pci_bus 0000:08: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.243276] pci_bus 0000:08: resource 11 [mem 0xc0000000-0xdfffffff]
[ 0.243279] pci_bus 0000:08: resource 12 [mem 0xf0000000-0xfebfffff]
[ 0.243311] NET: Registered protocol family 2
[ 0.243481] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.244869] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.249146] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.249732] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.249735] TCP reno registered
[ 0.249748] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.249795] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.249960] NET: Registered protocol family 1
[ 0.249983] pci 0000:00:02.0: Boot video device
[ 0.250193] PCI: CLS 64 bytes, default 64
[ 0.250249] Unpacking initramfs...
[ 0.522508] Freeing initrd memory: 10288k freed
[ 0.527871] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.527876] Placing 64MB software IO TLB between ffff8800bb400000 - ffff8800bf400000
[ 0.527879] software IO TLB at phys 0xbb400000 - 0xbf400000
[ 0.527943] Simple Boot Flag at 0x36 set to 0x1
[ 0.528354] audit: initializing netlink socket (disabled)
[ 0.528369] type=2000 audit(1303971600.524:1): initialized
[ 0.537893] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.539817] VFS: Disk quotas dquot_6.5.2
[ 0.539877] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.539987] msgmni has been set to 7914
[ 0.540174] alg: No test for stdrng (krng)
[ 0.540226] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.540230] io scheduler noop registered
[ 0.540233] io scheduler deadline registered
[ 0.540269] io scheduler cfq registered (default)
[ 0.540938] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1d
[ 0.540961] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.541023] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.541147] pcieport 0000:00:1c.1: ACPI _OSC control granted for 0x1d
[ 0.541166] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.541221] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.541339] pcieport 0000:00:1c.2: ACPI _OSC control granted for 0x1d
[ 0.541358] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.541414] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.541536] pcieport 0000:00:1c.3: ACPI _OSC control granted for 0x1d
[ 0.541555] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.541610] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.541767] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.541774] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.541795] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.541798] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.541804] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.541827] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.541833] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.541855] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.541857] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 0.541863] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.541980] ERST: Table is not found!
[ 0.542225] Linux agpgart interface v0.103
[ 0.542316] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.542410] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.543617] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.548459] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.548513] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.639965] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.640284] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.640371] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.640377] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.640380] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.640383] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.640386] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.640471] mice: PS/2 mouse device common for all mice
[ 0.640514] rtc_cmos 00:09: RTC can wake from S4
[ 0.646771] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.659978] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 0.660011] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.660020] cpuidle: using governor ladder
[ 0.660022] cpuidle: using governor menu
[ 0.660276] TCP cubic registered
[ 0.660400] NET: Registered protocol family 10
[ 0.660751] lo: Disabled Privacy Extensions
[ 0.660954] Mobile IPv6
[ 0.660957] NET: Registered protocol family 17
[ 0.660961] Registering the dns_resolver key type
[ 0.661071] PM: Hibernation image not present or could not be loaded.
[ 0.661084] registered taskstats version 1
[ 0.661531] rtc_cmos 00:09: setting system clock to 2011-04-28 06:20:01 UTC (1303971601)
[ 0.661567] Initalizing network drop monitor service
[ 0.661614] Freeing unused kernel memory: 608k freed
[ 0.661766] Write protecting the kernel read-only data: 6144k
[ 0.661913] Freeing unused kernel memory: 852k freed
[ 0.662234] Freeing unused kernel memory: 796k freed
[ 0.675459] <30>udevd[51]: starting version 168
[ 0.785031] sky2: driver version 1.28
[ 0.785071] sky2 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.785087] sky2 0000:05:00.0: setting latency timer to 64
[ 0.785140] sky2 0000:05:00.0: Yukon-2 FE chip revision 3
[ 0.785272] sky2 0000:05:00.0: irq 44 for MSI/MSI-X
[ 0.785979] sky2 0000:05:00.0: eth0: addr 00:16:d3:ad:1f:e1
[ 0.809816] firewire_ohci 0000:08:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.830757] sdhci: Secure Digital Host Controller Interface driver
[ 0.830760] sdhci: Copyright(c) Pierre Ossman
[ 0.837563] usbcore: registered new interface driver usbfs
[ 0.837592] usbcore: registered new interface driver hub
[ 0.840070] SCSI subsystem initialized
[ 0.844019] usbcore: registered new device driver usb
[ 0.846162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.846192] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.846223] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.846227] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.846250] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.852037] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.855912] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.855936] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4705c00
[ 0.872045] libata version 3.00 loaded.
[ 0.879998] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.880024] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.880027] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880029] usb usb1: Product: EHCI Host Controller
[ 0.880031] usb usb1: Manufacturer: Linux 2.6.37-2-amd64 ehci_hcd
[ 0.880033] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.880164] hub 1-0:1.0: USB hub found
[ 0.880169] hub 1-0:1.0: 4 ports detected
[ 0.880277] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.880308] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.880312] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.880322] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.888158] firewire_ohci: Added fw-ohci device 0000:08:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 0.888334] sdhci-pci 0000:08:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 0.888367] sdhci-pci 0000:08:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 0.889391] sdhci-pci 0000:08:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.889401] mmc0: no vmmc regulator found
[ 0.890431] Registered led device: mmc0::
[ 0.891475] mmc0: SDHCI controller on PCI [0000:08:09.1] using DMA
[ 0.892045] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.895931] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.895949] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4706000
[ 0.907992] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.908031] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.908034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.908036] usb usb2: Product: EHCI Host Controller
[ 0.908038] usb usb2: Manufacturer: Linux 2.6.37-2-amd64 ehci_hcd
[ 0.908040] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.908162] hub 2-0:1.0: USB hub found
[ 0.908167] hub 2-0:1.0: 6 ports detected
[ 0.910106] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.910188] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.910196] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.910201] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.910211] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.920159] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
[ 0.920201] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.920204] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.920207] usb usb3: Product: UHCI Host Controller
[ 0.920209] usb usb3: Manufacturer: Linux 2.6.37-2-amd64 uhci_hcd
[ 0.920211] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.920381] hub 3-0:1.0: USB hub found
[ 0.920386] hub 3-0:1.0: 2 ports detected
[ 0.920482] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.920490] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.920493] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.920500] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.936147] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860
[ 0.936184] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.936187] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.936189] usb usb4: Product: UHCI Host Controller
[ 0.936191] usb usb4: Manufacturer: Linux 2.6.37-2-amd64 uhci_hcd
[ 0.936194] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.936356] hub 4-0:1.0: USB hub found
[ 0.936361] hub 4-0:1.0: 2 ports detected
[ 0.936447] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.936454] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.936457] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.936465] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.948999] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 0.949039] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.949042] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.949044] usb usb5: Product: UHCI Host Controller
[ 0.949046] usb usb5: Manufacturer: Linux 2.6.37-2-amd64 uhci_hcd
[ 0.949049] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.949214] hub 5-0:1.0: USB hub found
[ 0.949219] hub 5-0:1.0: 2 ports detected
[ 0.949304] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.949311] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.949314] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.949322] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.960311] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 0.960349] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.960352] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.960355] usb usb6: Product: UHCI Host Controller
[ 0.960357] usb usb6: Manufacturer: Linux 2.6.37-2-amd64 uhci_hcd
[ 0.960359] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.960465] hub 6-0:1.0: USB hub found
[ 0.960470] hub 6-0:1.0: 2 ports detected
[ 0.960560] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.960567] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.960571] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.960578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.972146] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 0.972185] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.972188] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.972191] usb usb7: Product: UHCI Host Controller
[ 0.972193] usb usb7: Manufacturer: Linux 2.6.37-2-amd64 uhci_hcd
[ 0.972195] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.972297] hub 7-0:1.0: USB hub found
[ 0.972301] hub 7-0:1.0: 2 ports detected
[ 0.972382] ahci 0000:00:1f.2: version 3.0
[ 0.972396] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.972455] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.972527] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.972531] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.972537] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.973342] scsi0 : ahci
[ 0.973497] scsi1 : ahci
[ 0.973603] scsi2 : ahci
[ 0.973764] ata1: SATA max UDMA/133 abar m2048@0xf4705000 port 0xf4705100 irq 45
[ 0.973768] ata2: SATA max UDMA/133 abar m2048@0xf4705000 port 0xf4705180 irq 45
[ 0.973772] ata3: SATA max UDMA/133 abar m2048@0xf4705000 port 0xf4705200 irq 45
[ 0.973878] ata_piix 0000:00:1f.1: version 2.13
[ 0.973889] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.973929] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.974531] scsi3 : ata_piix
[ 0.974753] scsi4 : ata_piix
[ 0.975313] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
[ 0.975316] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
[ 1.141394] ata4.00: ATAPI: MATSHITADVD-RAM UJ-851S, 1.50, max MWDMA2
[ 1.156364] ata4.00: configured for MWDMA2
[ 1.292019] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.292047] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.292066] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.305047] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.305050] ACPI: Thermal Zone [TZS0] (48 C)
[ 1.305055] ata1.00: unexpected _GTF length (8)
[ 1.308014] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 1.352668] ata1.00: ATA-8: ST9500325ASG, 0006APM2, max UDMA/133
[ 1.352671] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.388087] firewire_core: created device fw0: GUID 07e40a004f215033, S400
[ 1.453010] usb 2-5: New USB device found, idVendor=04f2, idProduct=b016
[ 1.453013] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.453016] usb 2-5: Product: HP Webcam
[ 1.453018] usb 2-5: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.453020] usb 2-5: SerialNumber: SN0001
[ 1.804017] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 1.805006] ata1.00: unexpected _GTF length (8)
[ 1.806057] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.806060] ACPI: Thermal Zone [TZS1] (42 C)
[ 1.846703] ata1.00: configured for UDMA/133
[ 1.846823] scsi 0:0:0:0: Direct-Access ATA ST9500325ASG 0006 PQ: 0 ANSI: 5
[ 1.848845] scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-851S 1.50 PQ: 0 ANSI: 5
[ 1.861496] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.861589] sd 0:0:0:0: [sda] Write Protect is off
[ 1.861593] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.861620] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.862858] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.862861] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.863058] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.908047] sda: sda1 sda2 sda3
[ 1.908343] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.913845] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.914269] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 1.967438] usb 4-1: New USB device found, idVendor=08ff, idProduct=2580
[ 1.967442] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.967445] usb 4-1: Product: Fingerprint Sensor
[ 2.208020] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 2.382532] usb 7-2: New USB device found, idVendor=03f0, idProduct=171d
[ 2.382535] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.382538] usb 7-2: Product: HP Integrated Module
[ 2.382540] usb 7-2: Manufacturer: Broadcom Corp
[ 3.154028] device-mapper: uevent: version 1.0.3
[ 3.154251] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 3.524053] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.152464] <30>udevd[328]: starting version 168
[ 6.874673] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 7.042237] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 7.554550] loop: module loaded
[ 7.963495] cfg80211: Calling CRDA to update world regulatory domain
[ 7.986684] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input1
[ 8.001951] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input2
[ 8.482992] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 8.482996] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 8.483084] iwl3945 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 8.483099] iwl3945 0000:07:00.0: setting latency timer to 64
[ 8.537205] iwl3945 0000:07:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 8.537208] iwl3945 0000:07:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 8.537354] iwl3945 0000:07:00.0: irq 46 for MSI/MSI-X
[ 8.835663] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 9.352274] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.352347] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 9.352379] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.457708] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
[ 9.650777] Linux video capture interface: v2.00
[ 9.678799] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b016)
[ 9.681898] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input4
[ 9.681972] usbcore: registered new interface driver uvcvideo
[ 9.681974] USB Video Class driver (v1.0.0)
[ 9.764198] Adding 3903484k swap on /dev/mapper/manfredi-swap. Priority:-1 extents:1 across:3903484k
[ 10.346600] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 13.051950] fuse init (API version 7.15)
[ 14.665553] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.686429] NET: Registered protocol family 15
[ 14.730015] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 14.737247] alg: No test for cipher_null (cipher_null-generic)
[ 14.737277] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 14.737299] alg: No test for digest_null (digest_null-generic)
[ 14.737319] alg: No test for compress_null (compress_null-generic)
[ 14.951047] padlock: VIA PadLock Hash Engine not detected.
[ 15.077555] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.085454] padlock: VIA PadLock Hash Engine not detected.
[ 15.228309] Intel AES-NI instructions are not detected.
[ 15.314290] padlock: VIA PadLock not detected.
[ 17.107842] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5
[ 18.589083] sky2 0000:05:00.0: eth0: enabling interface
[ 18.589611] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.843851] iwl3945 0000:07:00.0: loaded firmware version 15.32.2.9
[ 18.913111] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.016046] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 21.016872] ACPI: Lid Switch [LID0]
[ 21.016967] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[ 21.017016] ACPI: Sleep Button [SLPB]
[ 21.017102] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 21.017143] ACPI: Power Button [PWRF]
[ 21.084750] [drm] Initialized drm 1.1.0 20060810
[ 21.181387] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.181392] i915 0000:00:02.0: setting latency timer to 64
[ 21.228904] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 21.228907] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 21.230377] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 21.283437] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 21.283957] [drm] initialized overlay support
[ 21.606928] Bluetooth: Core ver 2.15
[ 21.606951] NET: Registered protocol family 31
[ 21.606953] Bluetooth: HCI device and connection manager initialized
[ 21.606956] Bluetooth: HCI socket layer initialized
[ 21.674875] Bluetooth: L2CAP ver 2.15
[ 21.674878] Bluetooth: L2CAP socket layer initialized
[ 21.692270] Bluetooth: RFCOMM TTY layer initialized
[ 21.692275] Bluetooth: RFCOMM socket layer initialized
[ 21.692277] Bluetooth: RFCOMM ver 1.11
[ 21.695853] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.695856] Bluetooth: BNEP filters: protocol multicast
[ 21.729899] Console: switching to colour frame buffer device 160x50
[ 21.729906] fb0: inteldrmfb frame buffer device
[ 21.729908] drm: registered panic notifier
[ 21.738242] Bluetooth: SCO (Voice Link) ver 0.6
[ 21.738244] Bluetooth: SCO socket layer initialized
[ 21.748886] acpi device:09: registered as cooling_device0
[ 21.749241] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 21.749309] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 21.749646] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.868056] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
[ 28.407569] Ebtables v2.0 registered
[ 28.586521] ACPI: acpi_idle registered with cpuidle
[ 28.586920] Marking TSC unstable due to TSC halts in idle
[ 28.587846] Switching to clocksource hpet
[ 33.573097] vboxdrv: Found 2 processor cores.
[ 33.573696] VBoxDrv: dbg - g_abExecMemory=ffffffffa05393c0
[ 33.573720] vboxdrv: fAsync=0 offMin=0x19a offMax=0x672
[ 33.574243] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 33.574246] vboxdrv: Successfully loaded version 4.0.6 (interface 0x00180000).
[ 34.852090] device eth0 entered promiscuous mode
[ 34.900052] device wlan0 entered promiscuous mode
[ 35.863123] lo: Disabled Privacy Extensions
[ 176.763102] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0
[ 180.211442] EXT4-fs (dm-2): re-mounted. Opts: commit=0
--- End Message ---