Bug#620177: xserver-xorg-core: after suspend/resume, X sometimes gets stuck just showing mouse cursor
Package: xserver-xorg-core
Version: 2:1.9.5-1
Severity: normal
After a suspend/resume cycle, quite often X gets stuck: instead of being
shown the GNOME unlock dialog, I just get a blank screen with the mouse
cursor in the middle of the screen. I cannot move the mouse cursor.
X is not using 100% of CPU time, I can still switch to a console.
Restarting the gdm3 service (thus restarting X), gives me a working X
again. There are no obvious errors in dmesg, Xorg.0.log nor
.xsession-errors.
In my GNOME session, I'm using compiz.
-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Aug 13 2010 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1926464 Mar 26 04:49 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
/etc/X11/xorg.conf does not exist.
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
/etc/modprobe.d/radeon-kms.conf:
options radeon modeset=1
Kernel version (/proc/version):
-------------------------------
Linux version 2.6.38-2-amd64 (Debian 2.6.38-2) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-14) ) #1 SMP Tue Mar 29 16:45:36 UTC 2011
Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 47528 Mar 30 20:27 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[ 18.248]
X.Org X Server 1.9.5
Release Date: 2011-03-17
[ 18.248] X Protocol Version 11, Revision 0
[ 18.248] Build Operating System: Linux 2.6.38-1-amd64 x86_64 Debian
[ 18.248] Current Operating System: Linux defected 2.6.38-2-amd64 #1 SMP Tue Mar 29 16:45:36 UTC 2011 x86_64
[ 18.249] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-2-amd64 root=/dev/mapper/Linux-root ro quiet
[ 18.249] Build Date: 26 March 2011 03:32:34AM
[ 18.249] xorg-server 2:1.9.5-1 (Cyril Brulebois <kibi@debian.org>)
[ 18.249] Current version of pixman: 0.21.4
[ 18.249] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.249] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.249] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 30 09:13:45 2011
[ 18.317] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.351] (==) No Layout section. Using the first Screen section.
[ 18.351] (==) No screen section available. Using defaults.
[ 18.351] (**) |-->Screen "Default Screen Section" (0)
[ 18.351] (**) | |-->Monitor "<default monitor>"
[ 18.351] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.351] (==) Automatically adding devices
[ 18.351] (==) Automatically enabling devices
[ 18.395] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 18.395] Entry deleted from font path.
[ 18.425] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 18.425] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.425] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.425] (II) Loader magic: 0x7d1be0
[ 18.425] (II) Module ABI versions:
[ 18.425] X.Org ANSI C Emulation: 0.4
[ 18.425] X.Org Video Driver: 8.0
[ 18.425] X.Org XInput driver : 11.0
[ 18.425] X.Org Server Extension : 4.0
[ 18.426] (--) PCI:*(0:0:2:0) 8086:2a42:1028:0233 rev 7, Mem @ 0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000ef98/8
[ 18.426] (--) PCI: (0:0:2:1) 8086:2a43:1028:0233 rev 7, Mem @ 0xf6b00000/1048576
[ 18.427] (II) Open ACPI successful (/var/run/acpid.socket)
[ 18.427] (II) LoadModule: "extmod"
[ 18.508] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 18.519] (II) Module extmod: vendor="X.Org Foundation"
[ 18.519] compiled for 1.9.5, module version = 1.0.0
[ 18.519] Module class: X.Org Server Extension
[ 18.519] ABI class: X.Org Server Extension, version 4.0
[ 18.519] (II) Loading extension SELinux
[ 18.519] (II) Loading extension MIT-SCREEN-SAVER
[ 18.519] (II) Loading extension XFree86-VidModeExtension
[ 18.519] (II) Loading extension XFree86-DGA
[ 18.519] (II) Loading extension DPMS
[ 18.519] (II) Loading extension XVideo
[ 18.519] (II) Loading extension XVideo-MotionCompensation
[ 18.519] (II) Loading extension X-Resource
[ 18.519] (II) LoadModule: "dbe"
[ 18.519] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 18.520] (II) Module dbe: vendor="X.Org Foundation"
[ 18.520] compiled for 1.9.5, module version = 1.0.0
[ 18.520] Module class: X.Org Server Extension
[ 18.520] ABI class: X.Org Server Extension, version 4.0
[ 18.520] (II) Loading extension DOUBLE-BUFFER
[ 18.520] (II) LoadModule: "glx"
[ 18.520] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.532] (II) Module glx: vendor="X.Org Foundation"
[ 18.532] compiled for 1.9.5, module version = 1.0.0
[ 18.532] ABI class: X.Org Server Extension, version 4.0
[ 18.532] (==) AIGLX enabled
[ 18.532] (II) Loading extension GLX
[ 18.533] (II) LoadModule: "record"
[ 18.533] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 18.534] (II) Module record: vendor="X.Org Foundation"
[ 18.534] compiled for 1.9.5, module version = 1.13.0
[ 18.534] Module class: X.Org Server Extension
[ 18.534] ABI class: X.Org Server Extension, version 4.0
[ 18.534] (II) Loading extension RECORD
[ 18.534] (II) LoadModule: "dri"
[ 18.534] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 18.543] (II) Module dri: vendor="X.Org Foundation"
[ 18.543] compiled for 1.9.5, module version = 1.0.0
[ 18.543] ABI class: X.Org Server Extension, version 4.0
[ 18.544] (II) Loading extension XFree86-DRI
[ 18.544] (II) LoadModule: "dri2"
[ 18.544] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.556] (II) Module dri2: vendor="X.Org Foundation"
[ 18.556] compiled for 1.9.5, module version = 1.2.0
[ 18.556] ABI class: X.Org Server Extension, version 4.0
[ 18.556] (II) Loading extension DRI2
[ 18.556] (==) Matched intel as autoconfigured driver 0
[ 18.556] (==) Matched vesa as autoconfigured driver 1
[ 18.556] (==) Matched fbdev as autoconfigured driver 2
[ 18.556] (==) Assigned the driver to the xf86ConfigLayout
[ 18.556] (II) LoadModule: "intel"
[ 18.556] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.608] (II) Module intel: vendor="X.Org Foundation"
[ 18.608] compiled for 1.9.4, module version = 2.14.0
[ 18.608] Module class: X.Org Video Driver
[ 18.608] ABI class: X.Org Video Driver, version 8.0
[ 18.608] (II) LoadModule: "vesa"
[ 18.608] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.621] (II) Module vesa: vendor="X.Org Foundation"
[ 18.621] compiled for 1.9.4, module version = 2.3.0
[ 18.621] Module class: X.Org Video Driver
[ 18.621] ABI class: X.Org Video Driver, version 8.0
[ 18.621] (II) LoadModule: "fbdev"
[ 18.621] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 18.646] (II) Module fbdev: vendor="X.Org Foundation"
[ 18.646] compiled for 1.9.4, module version = 0.4.2
[ 18.646] ABI class: X.Org Video Driver, version 8.0
[ 18.646] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 18.646] (II) VESA: driver for VESA chipsets: vesa
[ 18.646] (II) FBDEV: driver for framebuffer: fbdev
[ 18.646] (++) using VT number 7
[ 18.651] (WW) Falling back to old probe method for vesa
[ 18.651] (WW) Falling back to old probe method for fbdev
[ 18.651] (II) Loading sub module "fbdevhw"
[ 18.651] (II) LoadModule: "fbdevhw"
[ 18.651] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 18.652] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 18.653] compiled for 1.9.5, module version = 0.0.2
[ 18.653] ABI class: X.Org Video Driver, version 8.0
[ 18.653] drmOpenDevice: node name is /dev/dri/card0
[ 18.653] drmOpenDevice: open result is 9, (OK)
[ 18.653] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 18.653] drmOpenDevice: node name is /dev/dri/card0
[ 18.653] drmOpenDevice: open result is 9, (OK)
[ 18.653] drmOpenByBusid: drmOpenMinor returns 9
[ 18.653] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 18.653] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.653] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 18.653] (==) intel(0): RGB weight 888
[ 18.653] (==) intel(0): Default visual is TrueColor
[ 18.653] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 18.653] (--) intel(0): Chipset: "GM45"
[ 18.653] (**) intel(0): Tiling enabled
[ 18.653] (**) intel(0): SwapBuffers wait enabled
[ 18.653] (==) intel(0): video overlay key set to 0x101fe
[ 18.653] (II) intel(0): Output LVDS1 has no monitor section
[ 18.656] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 18.715] (II) intel(0): Output VGA1 has no monitor section
[ 18.718] (II) intel(0): Output HDMI1 has no monitor section
[ 18.718] (II) intel(0): Output DP1 has no monitor section
[ 18.722] (II) intel(0): Output HDMI2 has no monitor section
[ 18.722] (II) intel(0): Output DP2 has no monitor section
[ 18.723] (II) intel(0): Output DP3 has no monitor section
[ 18.723] (II) intel(0): Output TV1 has no monitor section
[ 18.723] (II) intel(0): EDID for output LVDS1
[ 18.723] (II) intel(0): Manufacturer: SEC Model: 5442 Serial#: 0
[ 18.724] (II) intel(0): Year: 2008 Week: 0
[ 18.724] (II) intel(0): EDID Version: 1.3
[ 18.724] (II) intel(0): Digital Display Input
[ 18.724] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
[ 18.724] (II) intel(0): Gamma: 2.20
[ 18.724] (II) intel(0): No DPMS capabilities specified
[ 18.724] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 18.724] (II) intel(0): First detailed timing is preferred mode
[ 18.724] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 18.724] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 18.724] (II) intel(0): Manufacturer's mask: 0
[ 18.724] (II) intel(0): Supported detailed timing:
[ 18.724] (II) intel(0): clock: 107.8 MHz Image Size: 303 x 190 mm
[ 18.724] (II) intel(0): h_active: 1440 h_sync: 1486 h_sync_end 1556 h_blank_end 1928 h_border: 0
[ 18.724] (II) intel(0): v_active: 900 v_sync: 909 v_sync_end 918 v_blanking: 932 v_border: 0
[ 18.724] (II) intel(0): Supported detailed timing:
[ 18.724] (II) intel(0): clock: 71.9 MHz Image Size: 303 x 190 mm
[ 18.724] (II) intel(0): h_active: 1440 h_sync: 1486 h_sync_end 1556 h_blank_end 1928 h_border: 0
[ 18.724] (II) intel(0): v_active: 900 v_sync: 909 v_sync_end 918 v_blanking: 932 v_border: 0
[ 18.724] (II) intel(0): TT219�141BT
[ 18.724] (II) intel(0): Unknown vendor-specific block 0
[ 18.724] (II) intel(0): EDID (in hex):
[ 18.724] (II) intel(0): 00ffffffffffff004ca3425400000000
[ 18.724] (II) intel(0): 00120103901e13780a87f594574f8c27
[ 18.724] (II) intel(0): 27505400000001010101010101010101
[ 18.724] (II) intel(0): 0101010101011d2aa0e8518420302e46
[ 18.724] (II) intel(0): 99002fbe1000001a141ca0e851842030
[ 18.724] (II) intel(0): 2e4699002fbe1000001a000000fe0054
[ 18.724] (II) intel(0): 543231398131343142540a2000000000
[ 18.724] (II) intel(0): 000c10171b3669a9ff02010a202000d0
[ 18.724] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 18.724] (II) intel(0): Printing DDC gathered Modelines:
[ 18.724] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 18.724] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 18.724] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 18.724] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 18.724] (II) intel(0): Printing probed modes for output LVDS1
[ 18.724] (II) intel(0): Modeline "1440x900"x60.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 18.724] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 18.724] (II) intel(0): Modeline "1440x900"x40.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 18.724] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 18.725] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 18.725] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 18.725] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 18.725] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.725] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 18.725] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.783] (II) intel(0): EDID for output VGA1
[ 18.783] (II) intel(0): Manufacturer: DEL Model: 3007 Serial#: 1094796867
[ 18.783] (II) intel(0): Year: 2002 Week: 21
[ 18.783] (II) intel(0): EDID Version: 1.3
[ 18.783] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 18.783] (II) intel(0): Sync: Separate
[ 18.783] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 18.783] (II) intel(0): Gamma: 2.40
[ 18.783] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 18.783] (II) intel(0): First detailed timing is preferred mode
[ 18.783] (II) intel(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
[ 18.783] (II) intel(0): blueX: 0.143 blueY: 0.102 whiteX: 0.318 whiteY: 0.339
[ 18.783] (II) intel(0): Supported established timings:
[ 18.783] (II) intel(0): 720x400@70Hz
[ 18.783] (II) intel(0): 640x480@60Hz
[ 18.783] (II) intel(0): 640x480@75Hz
[ 18.783] (II) intel(0): 800x600@60Hz
[ 18.783] (II) intel(0): 800x600@75Hz
[ 18.783] (II) intel(0): 1024x768@60Hz
[ 18.783] (II) intel(0): 1024x768@75Hz
[ 18.783] (II) intel(0): 1280x1024@75Hz
[ 18.783] (II) intel(0): Manufacturer's mask: 0
[ 18.783] (II) intel(0): Supported detailed timing:
[ 18.783] (II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 18.783] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 18.783] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 18.783] (II) intel(0): Serial No: 9G07725KAAFC
[ 18.783] (II) intel(0): Monitor name: DELL 1702FP
[ 18.783] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz
[ 18.783] (II) intel(0): EDID (in hex):
[ 18.783] (II) intel(0): 00ffffffffffff0010ac073043464141
[ 18.783] (II) intel(0): 150c010308221b8cea6f8ba25a4d9424
[ 18.783] (II) intel(0): 1a5156a54b0001010101010101010101
[ 18.783] (II) intel(0): 010101010101302a009851002a403070
[ 18.783] (II) intel(0): 1300520e1100001e000000ff00394730
[ 18.783] (II) intel(0): 373732354b414146430a000000fc0044
[ 18.783] (II) intel(0): 454c4c203137303246500a20000000fd
[ 18.783] (II) intel(0): 00384c1e500e000a202020202020000b
[ 18.783] (II) intel(0): Printing probed modes for output VGA1
[ 18.783] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 18.783] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 18.783] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 18.783] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 18.783] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 18.783] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 18.783] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 18.783] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 18.783] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 18.787] (II) intel(0): EDID for output HDMI1
[ 18.787] (II) intel(0): EDID for output DP1
[ 18.791] (II) intel(0): EDID for output HDMI2
[ 18.791] (II) intel(0): EDID for output DP2
[ 18.792] (II) intel(0): EDID for output DP3
[ 18.792] (II) intel(0): EDID for output TV1
[ 18.792] (II) intel(0): Printing probed modes for output TV1
[ 18.792] (II) intel(0): Modeline "848x480"x30.0 14.51 848 849 912 944 480 481 512 513 (15.4 kHz)
[ 18.792] (II) intel(0): Modeline "640x480"x30.0 11.31 640 641 704 736 480 481 512 513 (15.4 kHz)
[ 18.792] (II) intel(0): Modeline "1024x768"x30.0 26.89 1024 1025 1088 1120 768 769 800 801 (24.0 kHz)
[ 18.792] (II) intel(0): Modeline "800x600"x30.0 17.00 800 801 864 896 600 601 632 633 (19.0 kHz)
[ 18.792] (II) intel(0): Output LVDS1 connected
[ 18.792] (II) intel(0): Output VGA1 connected
[ 18.792] (II) intel(0): Output HDMI1 disconnected
[ 18.792] (II) intel(0): Output DP1 disconnected
[ 18.792] (II) intel(0): Output HDMI2 disconnected
[ 18.792] (II) intel(0): Output DP2 disconnected
[ 18.792] (II) intel(0): Output DP3 disconnected
[ 18.792] (II) intel(0): Output TV1 disconnected
[ 18.792] (II) intel(0): Using fuzzy aspect match for initial modes
[ 18.792] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 18.792] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 18.793] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 18.793] (II) intel(0): Kernel page flipping support detected, enabling
[ 18.793] (**) intel(0): Display dimensions: (300, 190) mm
[ 18.793] (**) intel(0): DPI set to (86, 102)
[ 18.793] (II) Loading sub module "fb"
[ 18.793] (II) LoadModule: "fb"
[ 18.793] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.925] (II) Module fb: vendor="X.Org Foundation"
[ 18.925] compiled for 1.9.5, module version = 1.0.0
[ 18.926] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.926] (II) UnloadModule: "vesa"
[ 18.926] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.926] (II) UnloadModule: "fbdev"
[ 18.926] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 18.926] (II) UnloadModule: "fbdevhw"
[ 18.926] (II) Unloading /usr/lib/xorg/modules/libfbdevhw.so
[ 18.926] (==) Depth 24 pixmap format is 32 bpp
[ 18.926] (==) intel(0): VideoRam: 262144 KB
[ 18.926] (II) intel(0): [DRI2] Setup complete
[ 18.926] (II) intel(0): [DRI2] DRI driver: i965
[ 18.926] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 18.952] (II) UXA(0): Driver registered support for the following operations:
[ 18.952] (II) solid
[ 18.952] (II) copy
[ 18.952] (II) composite (RENDER acceleration)
[ 18.952] (II) put_image
[ 18.952] (II) get_image
[ 18.952] (==) intel(0): Backing store disabled
[ 18.952] (==) intel(0): Silken mouse enabled
[ 18.952] (II) intel(0): Initializing HW Cursor
[ 19.252] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 19.260] (==) intel(0): DPMS enabled
[ 19.261] (==) intel(0): Intel XvMC decoder enabled
[ 19.261] (II) intel(0): Set up textured video
[ 19.261] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 19.261] (II) intel(0): direct rendering: DRI2 Enabled
[ 19.261] (==) intel(0): hotplug detection: "enabled"
[ 19.261] (--) RandR disabled
[ 19.261] (II) Initializing built-in extension Generic Event Extension
[ 19.261] (II) Initializing built-in extension SHAPE
[ 19.261] (II) Initializing built-in extension MIT-SHM
[ 19.261] (II) Initializing built-in extension XInputExtension
[ 19.261] (II) Initializing built-in extension XTEST
[ 19.261] (II) Initializing built-in extension BIG-REQUESTS
[ 19.261] (II) Initializing built-in extension SYNC
[ 19.261] (II) Initializing built-in extension XKEYBOARD
[ 19.261] (II) Initializing built-in extension XC-MISC
[ 19.261] (II) Initializing built-in extension SECURITY
[ 19.261] (II) Initializing built-in extension XINERAMA
[ 19.261] (II) Initializing built-in extension XFIXES
[ 19.261] (II) Initializing built-in extension RENDER
[ 19.261] (II) Initializing built-in extension RANDR
[ 19.261] (II) Initializing built-in extension COMPOSITE
[ 19.261] (II) Initializing built-in extension DAMAGE
[ 19.261] (II) SELinux: Disabled on system
[ 19.582] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 19.582] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 19.582] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 19.582] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 19.582] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 19.583] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 19.583] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 19.583] (II) intel(0): Setting screen physical size to 270 x 203
[ 20.002] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 20.002] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 20.002] (II) LoadModule: "evdev"
[ 20.002] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.017] (II) Module evdev: vendor="X.Org Foundation"
[ 20.017] compiled for 1.9.4, module version = 2.6.0
[ 20.018] Module class: X.Org XInput Driver
[ 20.018] ABI class: X.Org XInput driver, version 11.0
[ 20.018] (**) Video Bus: always reports core events
[ 20.018] (**) Video Bus: Device: "/dev/input/event3"
[ 20.028] (--) Video Bus: Found keys
[ 20.028] (II) Video Bus: Configuring as keyboard
[ 20.028] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 20.028] (**) Option "xkb_rules" "evdev"
[ 20.028] (**) Option "xkb_model" "pc105"
[ 20.028] (**) Option "xkb_layout" "be"
[ 20.112] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 20.112] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.112] (**) Power Button: always reports core events
[ 20.112] (**) Power Button: Device: "/dev/input/event7"
[ 20.120] (--) Power Button: Found keys
[ 20.120] (II) Power Button: Configuring as keyboard
[ 20.120] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 20.120] (**) Option "xkb_rules" "evdev"
[ 20.120] (**) Option "xkb_model" "pc105"
[ 20.120] (**) Option "xkb_layout" "be"
[ 20.120] (II) config/udev: Adding input device Lid Switch (/dev/input/event6)
[ 20.120] (II) No input driver/identifier specified (ignoring)
[ 20.120] (II) config/udev: Adding input device Sleep Button (/dev/input/event8)
[ 20.121] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 20.121] (**) Sleep Button: always reports core events
[ 20.121] (**) Sleep Button: Device: "/dev/input/event8"
[ 20.136] (--) Sleep Button: Found keys
[ 20.136] (II) Sleep Button: Configuring as keyboard
[ 20.136] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 20.136] (**) Option "xkb_rules" "evdev"
[ 20.136] (**) Option "xkb_model" "pc105"
[ 20.136] (**) Option "xkb_layout" "be"
[ 20.138] (II) config/udev: Adding input device HID 413c:8157 (/dev/input/event2)
[ 20.138] (**) HID 413c:8157: Applying InputClass "evdev keyboard catchall"
[ 20.138] (**) HID 413c:8157: always reports core events
[ 20.138] (**) HID 413c:8157: Device: "/dev/input/event2"
[ 20.152] (--) HID 413c:8157: Found keys
[ 20.152] (II) HID 413c:8157: Configuring as keyboard
[ 20.152] (II) XINPUT: Adding extended input device "HID 413c:8157" (type: KEYBOARD)
[ 20.152] (**) Option "xkb_rules" "evdev"
[ 20.152] (**) Option "xkb_model" "pc105"
[ 20.152] (**) Option "xkb_layout" "be"
[ 20.154] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 20.154] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 20.154] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 20.154] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 20.168] (--) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 20.168] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 20.168] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 20.168] (--) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 20.168] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 20.168] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 20.168] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 20.168] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.168] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
[ 20.168] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 20.168] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 20.168] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 20.168] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 20.168] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 20.168] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 20.168] (II) No input driver/identifier specified (ignoring)
[ 20.169] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 20.169] (II) No input driver/identifier specified (ignoring)
[ 20.169] (II) config/udev: Adding input device HDA Intel Mic at Sep Left Jack (/dev/input/event12)
[ 20.169] (II) No input driver/identifier specified (ignoring)
[ 20.169] (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event13)
[ 20.169] (II) No input driver/identifier specified (ignoring)
[ 20.170] (II) config/udev: Adding input device HDA Intel Line Out at Sep Left Jack (/dev/input/event14)
[ 20.170] (II) No input driver/identifier specified (ignoring)
[ 20.170] (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event15)
[ 20.170] (II) No input driver/identifier specified (ignoring)
[ 20.175] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 20.175] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.175] (**) AT Translated Set 2 keyboard: always reports core events
[ 20.175] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 20.184] (--) AT Translated Set 2 keyboard: Found keys
[ 20.184] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 20.184] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 20.184] (**) Option "xkb_rules" "evdev"
[ 20.184] (**) Option "xkb_model" "pc105"
[ 20.184] (**) Option "xkb_layout" "be"
[ 20.184] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event10)
[ 20.184] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 20.184] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 20.184] (II) LoadModule: "synaptics"
[ 20.184] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 20.204] (II) Module synaptics: vendor="X.Org Foundation"
[ 20.204] compiled for 1.9.4, module version = 1.4.0
[ 20.204] Module class: X.Org XInput Driver
[ 20.204] ABI class: X.Org XInput driver, version 11.0
[ 20.204] (**) Option "Device" "/dev/input/event10"
[ 20.264] (--) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
[ 20.264] (--) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
[ 20.264] (--) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[ 20.264] (--) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
[ 20.264] (--) AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 16
[ 20.312] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 20.312] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 20.336] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD)
[ 20.336] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 20.336] (**) AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75
[ 20.336] (**) AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.156
[ 20.336] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 20.336] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 20.336] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 20.336] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 20.380] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 20.380] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse3)
[ 20.380] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 20.380] (**) Option "Device" "/dev/input/mouse3"
[ 20.392] (--) AlpsPS/2 ALPS DualPoint TouchPad: invalid x-axis range. defaulting to 1615 - 5685
[ 20.392] (--) AlpsPS/2 ALPS DualPoint TouchPad: invalid y-axis range. defaulting to 1729 - 4171
[ 20.392] (--) AlpsPS/2 ALPS DualPoint TouchPad: invalid pressure range. defaulting to 0 - 256
[ 20.392] (--) AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 16
[ 20.412] (EE) Query no Synaptics: 6003C8
[ 20.412] (--) AlpsPS/2 ALPS DualPoint TouchPad: no supported touchpad found
[ 20.412] (EE) AlpsPS/2 ALPS DualPoint TouchPad Unable to query/initialize Synaptics hardware.
[ 20.440] (EE) PreInit returned NULL for "AlpsPS/2 ALPS DualPoint TouchPad"
[ 20.440] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event9)
[ 20.440] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 20.440] (**) DualPoint Stick: always reports core events
[ 20.440] (**) DualPoint Stick: Device: "/dev/input/event9"
[ 20.452] (--) DualPoint Stick: Found 3 mouse buttons
[ 20.452] (--) DualPoint Stick: Found relative axes
[ 20.452] (--) DualPoint Stick: Found x and y relative axes
[ 20.452] (II) DualPoint Stick: Configuring as mouse
[ 20.452] (**) DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 20.452] (**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.452] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
[ 20.452] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
[ 20.452] (**) DualPoint Stick: (accel) acceleration profile 0
[ 20.452] (**) DualPoint Stick: (accel) acceleration factor: 2.000
[ 20.452] (**) DualPoint Stick: (accel) acceleration threshold: 4
[ 20.452] (II) DualPoint Stick: initialized for relative axes.
[ 20.452] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse2)
[ 20.452] (II) No input driver/identifier specified (ignoring)
[ 20.452] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 20.452] (II) No input driver/identifier specified (ignoring)
[ 20.455] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event16)
[ 20.455] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 20.455] (**) ACPI Virtual Keyboard Device: always reports core events
[ 20.455] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event16"
[ 20.464] (--) ACPI Virtual Keyboard Device: Found keys
[ 20.464] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 20.464] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
[ 20.464] (**) Option "xkb_rules" "evdev"
[ 20.464] (**) Option "xkb_model" "pc105"
[ 20.464] (**) Option "xkb_layout" "be"
[ 20.464] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[ 20.464] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 20.464] (**) Dell WMI hotkeys: always reports core events
[ 20.464] (**) Dell WMI hotkeys: Device: "/dev/input/event5"
[ 20.464] (--) Dell WMI hotkeys: Found keys
[ 20.464] (II) Dell WMI hotkeys: Configuring as keyboard
[ 20.464] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
[ 20.464] (**) Option "xkb_rules" "evdev"
[ 20.464] (**) Option "xkb_model" "pc105"
[ 20.464] (**) Option "xkb_layout" "be"
[ 22.464] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 22.464] (II) intel(0): Printing DDC gathered Modelines:
[ 22.464] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 22.464] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 22.538] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 22.538] (II) intel(0): Printing DDC gathered Modelines:
[ 22.538] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 22.538] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 22.652] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 22.652] (II) intel(0): Printing DDC gathered Modelines:
[ 22.652] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 22.653] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 40.392] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 40.392] (II) intel(0): Printing DDC gathered Modelines:
[ 40.392] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 40.392] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 40.526] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 40.526] (II) intel(0): Printing DDC gathered Modelines:
[ 40.526] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 40.526] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 40.607] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 40.607] (II) intel(0): Printing DDC gathered Modelines:
[ 40.607] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 40.607] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 40.727] (II) intel(0): Allocated new frame buffer 2752x1024 stride 11264, tiled
[ 42.306] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 42.307] (II) intel(0): Printing DDC gathered Modelines:
[ 42.307] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 42.307] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 52.626] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 52.626] (II) intel(0): Printing DDC gathered Modelines:
[ 52.626] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 52.626] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 11147.657] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 11147.657] (II) intel(0): Printing DDC gathered Modelines:
[ 11147.657] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 11147.657] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 22499.452] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 22499.452] (II) intel(0): Printing DDC gathered Modelines:
[ 22499.452] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 22499.452] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 24251.145] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 24251.145] (II) intel(0): Printing DDC gathered Modelines:
[ 24251.145] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 24251.145] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 24254.572] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 24259.897] (II) Open ACPI successful (/var/run/acpid.socket)
[ 24259.897] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 24259.920] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 24259.920] (II) intel(0): Printing DDC gathered Modelines:
[ 24259.920] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 24259.920] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 24260.232] (EE) Unable to open evdev device "/dev/input/event1".
[ 24260.232] [dix] couldn't enable device 10
[ 24260.288] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 24260.335] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 24260.335] (II) intel(0): Printing DDC gathered Modelines:
[ 24260.335] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 24260.335] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 24260.666] (II) config/udev: removing device Logitech USB-PS/2 Optical Mouse
[ 24260.668] (II) Logitech USB-PS/2 Optical Mouse: Close
[ 24260.669] (II) UnloadModule: "evdev"
[ 24260.675] (II) config/udev: removing device AT Translated Set 2 keyboard
[ 24260.684] (II) AT Translated Set 2 keyboard: Close
[ 24260.685] (II) UnloadModule: "evdev"
[ 24260.886] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 24261.047] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24261.047] (**) AT Translated Set 2 keyboard: always reports core events
[ 24261.047] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 24261.056] (--) AT Translated Set 2 keyboard: Found keys
[ 24261.056] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 24261.056] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 24261.056] (**) Option "xkb_rules" "evdev"
[ 24261.056] (**) Option "xkb_model" "pc105"
[ 24261.056] (**) Option "xkb_layout" "be"
[ 24261.199] (WW) intel(0): flip queue failed: Device or resource busy
[ 24261.199] (WW) intel(0): Page flip failed: Device or resource busy
[ 24261.653] (II) intel(0): Allocated new frame buffer 1472x900 stride 6144, tiled
[ 24333.977] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 24398.381] (II) Open ACPI successful (/var/run/acpid.socket)
[ 24398.381] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 24398.400] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 24398.400] (II) intel(0): Printing DDC gathered Modelines:
[ 24398.400] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 24398.400] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 24398.675] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 24405.484] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 24406.156] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 24406.562] (II) Open ACPI successful (/var/run/acpid.socket)
[ 24406.562] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 24406.568] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 24406.568] (II) intel(0): Printing DDC gathered Modelines:
[ 24406.568] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 24406.568] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 24406.824] [dix] couldn't enable device 12
[ 24413.309] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 24413.699] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 24414.888] (II) Open ACPI successful (/var/run/acpid.socket)
[ 24414.889] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 24414.904] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 24414.904] (II) intel(0): Printing DDC gathered Modelines:
[ 24414.904] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 24414.904] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 24415.256] [dix] couldn't enable device 12
[ 24419.540] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 24421.387] (II) Open ACPI successful (/var/run/acpid.socket)
[ 24421.387] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 24421.412] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 24421.412] (II) intel(0): Printing DDC gathered Modelines:
[ 24421.412] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 24421.412] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 24421.653] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 24442.784] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 24443.564] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 24522.441] (II) Open ACPI successful (/var/run/acpid.socket)
[ 24522.442] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 24522.456] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 24522.456] (II) intel(0): Printing DDC gathered Modelines:
[ 24522.456] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 24522.456] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 24522.704] [dix] couldn't enable device 12
[ 24523.768] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 24524.516] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 26290.053] (II) Open ACPI successful (/var/run/acpid.socket)
[ 26290.053] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 26290.060] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 26290.060] (II) intel(0): Printing DDC gathered Modelines:
[ 26290.060] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 26290.060] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 26290.300] [dix] couldn't enable device 12
[ 26312.068] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 26321.994] (II) Open ACPI successful (/var/run/acpid.socket)
[ 26321.995] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 26322.008] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 26322.008] (II) intel(0): Printing DDC gathered Modelines:
[ 26322.008] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 26322.008] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 26322.265] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 26327.864] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 26328.223] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 26332.941] (II) Open ACPI successful (/var/run/acpid.socket)
[ 26332.941] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 26332.948] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 26332.948] (II) intel(0): Printing DDC gathered Modelines:
[ 26332.948] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 26332.948] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 26333.188] [dix] couldn't enable device 12
[ 26337.808] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 26338.052] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 27385.906] (II) Open ACPI successful (/var/run/acpid.socket)
[ 27385.906] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 27385.928] (II) intel(0): EDID vendor "SEC", prod id 21570
[ 27385.928] (II) intel(0): Printing DDC gathered Modelines:
[ 27385.928] (II) intel(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (55.9 kHz)
[ 27385.928] (II) intel(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928 900 909 918 932 +hsync -vsync (37.3 kHz)
[ 27386.164] [dix] couldn't enable device 12
[ 27390.152] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 27390.777] (--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
udev information:
-----------------
P: /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input11/event3
N: input/event3
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input11/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: DMI_VENDOR=Dell Inc.
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7/event7
N: input/event7
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: DMI_VENDOR=Dell Inc.
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6/event6
N: input/event6
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=Dell Inc.
P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8/event8
N: input/event8
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: DMI_VENDOR=Dell Inc.
P: /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input2/event2
N: input/event2
S: input/by-id/usb-413c_8157-event-kbd
S: input/by-path/pci-0000:00:1a.0-usb-0:1.1:1.0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=413c
E: ID_VENDOR_ENC=413c
E: ID_VENDOR_ID=413c
E: ID_MODEL=8157
E: ID_MODEL_ENC=8157
E: ID_MODEL_ID=8157
E: ID_REVISION=0100
E: ID_SERIAL=413c_8157
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.0-usb-0:1.1:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: DEVLINKS=/dev/input/by-id/usb-413c_8157-event-kbd /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.1:1.0-event-kbd
P: /devices/pci0000:00/0000:00:1b.0/input/input12/event11
N: input/event11
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input12/event11
E: MAJOR=13
E: MINOR=75
E: DEVNAME=/dev/input/event11
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event12
N: input/event12
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event12
E: MAJOR=13
E: MINOR=76
E: DEVNAME=/dev/input/event12
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event13
N: input/event13
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event13
E: MAJOR=13
E: MINOR=77
E: DEVNAME=/dev/input/event13
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input15/event14
N: input/event14
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15/event14
E: MAJOR=13
E: MINOR=78
E: DEVNAME=/dev/input/event14
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input16/event15
N: input/event15
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input16/event15
E: MAJOR=13
E: MINOR=79
E: DEVNAME=/dev/input/event15
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.
P: /devices/platform/i8042/serio0/input/input18/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input18/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DMI_VENDOR=Dell Inc.
P: /devices/platform/i8042/serio1/input/input10/event10
N: input/event10
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
P: /devices/platform/i8042/serio1/input/input10/mouse3
N: input/mouse3
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input10/mouse3
E: MAJOR=13
E: MINOR=35
E: DEVNAME=/dev/input/mouse3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
P: /devices/platform/i8042/serio1/input/input9/event9
N: input/event9
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-event-mouse
P: /devices/platform/i8042/serio1/input/input9/mouse2
N: input/mouse2
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input9/mouse2
E: MAJOR=13
E: MINOR=34
E: DEVNAME=/dev/input/mouse2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-1-mouse
P: /devices/platform/pcspkr/input/input4/event4
N: input/event4
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/virtual/input/input17/event16
N: input/event16
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input17/event16
E: MAJOR=13
E: MINOR=80
E: DEVNAME=/dev/input/event16
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: DMI_VENDOR=Dell Inc.
P: /devices/virtual/input/input5/event5
N: input/event5
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=be
E: DMI_VENDOR=Dell Inc.
DRM Information from dmesg:
---------------------------
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.841068] Linux agpgart interface v0.103
[ 0.841159] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.841238] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.842171] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.842290] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 7.342435] [drm] Initialized drm 1.1.0 20060810
[ 7.784387] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 7.784782] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.784784] [drm] Driver supports precise vblank timestamp query.
[ 8.350395] fb0: inteldrmfb frame buffer device
[ 8.350397] drm: registered panic notifier
[ 8.378605] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (300, 'testing'), (200, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-core depends on:
ii keyboard-configuration 1.70 system-wide keyboard preferences
ii libaudit0 1.7.13-1+b2 Dynamic library for security audit
ii libc6 2.11.2-11 Embedded GNU C Library: Shared lib
ii libdrm2 2.4.23-3 Userspace interface to kernel DRM
ii libgcrypt11 1.4.6-5 LGPL Crypto library - runtime libr
ii libpciaccess0 0.12.1-1 Generic PCI access library for X
ii libpixman-1-0 0.21.4-2 pixel-manipulation library for X a
ii libselinux1 2.0.96-1 SELinux runtime shared libraries
ii libudev0 166-1 libudev shared library
ii libxau6 1:1.0.6-1 X11 authorisation library
ii libxdmcp6 1:1.1.0-1 X11 Display Manager Control Protoc
ii libxfont1 1:1.4.3-2 X11 font rasterisation library
ii udev 166-1 /dev/ and hotplug management daemo
ii xserver-common 2:1.9.5-1 common files used by various X ser
Versions of packages xserver-xorg-core recommends:
ii libgl1-mesa-dri 7.10-4 A free implementation of the OpenG
Versions of packages xserver-xorg-core suggests:
ii xfonts-100dpi 1:1.0.3 100 dpi fonts for X
ii xfonts-75dpi 1:1.0.3 75 dpi fonts for X
ii xfonts-scalable 1:1.0.3-1 scalable fonts for X
-- no debconf information
Reply to: