Bug#618900: xserver-xorg-video-mga: does not work with MGA G100 chip
Package: xserver-xorg-video-mga
Version: 1:1.4.11.dfsg-4+squeeze1
Severity: important
When starting X from console with startx video changes to graphic mode,
but the picture on the screen is all messed up. I can not see anything
sane. Bottom half of screen is black, only upper half is used by X but
it is so messed up that I can not recognize anything where to click.
The computer is actually working, so I can switch to console with
CTRL-ALT-F1. But at this time the screen is messed up on console too.
The screen is full of some random symbols [letters/puctuation marks] and
all those letter kind of dance [to me it seems like sync signal is bad].
I can type some commands but and see that some characters on screen are
changing but it does not echo character that I type but some random
character. And command do get executed. I can for example type:
$ sudo reboot
and computer do reboot, but I can not see what I am typing.
Basically at this point computer is not usable either in graphic mode or
on console.
Just to make sure my graphic card or monitor are not dead I installed
Lenny again and all worked well.
If I use 'vesa' as driver instead of 'mga' the graphical desktop shows OK
but it is not usable because the useage of CPU by X is 100% and it takes
ages to open any window [xterm or xclock for example].
For fastest fix that comes to mind now is to use driver from lenny.
Is it possible? Or can I download and recompile lennys driver to work
in squeeze?
Martin
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Mar 17 23:38 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1733468 Jan 12 04:50 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G100 [Productiva] AGP (rev 02)
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 514 Mar 19 13:55 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "Device"
Identifier "MGA G100"
Driver "mga"
# Driver "vesa"
EndSection
# Section "Monitor"
# Identifier "LG W1943"
# EndSection
# Section "Screen"
# Identifier "Screen0"
# Device "MGA G100"
# Monitor "LG W1943"
# DefaultDepth 16
# SubSection "Display"
# Depth 16
# # Modes "1360x768" "800x600" "640x480"
# # Modes "1024x768" "800x600" "640x480"
# # Modes "800x600" "640x480"
# # Modes "640x480"
# EndSubSection
# EndSection
Kernel version (/proc/version):
Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011
Xorg X server log files on system:
-rw-r--r-- 1 root root 28367 Mar 19 13:58 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.28-dsa-ia32 i686 Debian
Current Operating System: Linux alfa 2.6.32-5-686 #1 SMP Wed Jan 12 04:01:41 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=14000971-c888-4110-acbb-79b2928c2515 ro quiet
Build Date: 12 January 2011 03:44:48AM
xorg-server 2:1.7.7-11 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 19 13:56:55 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "MGA G100"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81ecca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:0:0) 102b:1001:110a:001e Matrox Graphics, Inc. MGA G100 [Productiva] AGP rev 2, Mem @ 0xde000000/16777216, 0xfecf8000/16384, 0xfe000000/8388608
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "mga"
(II) Loading /usr/lib/xorg/modules/drivers/mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.4.11
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
mgag200 eW Nuvoton, mgag200eH, mgag400, mgag550
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(--) MGA(0): Chipset: "mgag100"
(--) MGA(0): Linear framebuffer at 0xDE000000
(--) MGA(0): MMIO registers at 0xFECF8000
(--) MGA(0): Pseudo-DMA transfer window at 0xFE000000
(II) MGA(0): MAPPED Framebuffer DE000000 800000 to FFFFFFFFB6AE0000.
(II) MGA(0): UNMAPPING framebuffer 0xFFFFFFFFB6AE0000, 0x800000.
(II) MGA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) MGA(0): Depth 24, (--) framebuffer bpp 32
(==) MGA(0): RGB weight 888
(==) MGA(0): Using AGP 1x mode
(==) MGA(0): Using HW cursor
(==) MGA(0): Using XAA acceleration
(--) MGA(0): Video BIOS info block at offset 0x07440
(==) MGA(0): VideoRAM: 6144 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) MGA(0): MAPPED Framebuffer DE000000 600000 to FFFFFFFFB6CE0000.
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC P1" initialized.
(II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0.
(II) MGA(0): I2C monitor info
(II) MGA(0): Manufacturer: GSM Model: 4bad Serial#: 212516
(II) MGA(0): Year: 2009 Week: 39
(II) MGA(0): EDID Version: 1.3
(II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) MGA(0): Sync: Separate SyncOnGreen
(II) MGA(0): Max Image Size [cm]: horiz.: 41 vert.: 23
(II) MGA(0): Gamma: 2.20
(II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MGA(0): First detailed timing is preferred mode
(II) MGA(0): redX: 0.641 redY: 0.334 greenX: 0.301 greenY: 0.608
(II) MGA(0): blueX: 0.145 blueY: 0.073 whiteX: 0.313 whiteY: 0.329
(II) MGA(0): Supported established timings:
(II) MGA(0): 720x400@70Hz
(II) MGA(0): 640x480@60Hz
(II) MGA(0): 640x480@75Hz
(II) MGA(0): 800x600@60Hz
(II) MGA(0): 800x600@75Hz
(II) MGA(0): 832x624@75Hz
(II) MGA(0): 1024x768@60Hz
(II) MGA(0): 1024x768@75Hz
(II) MGA(0): Manufacturer's mask: 0
(II) MGA(0): Supported standard timings:
(II) MGA(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
(II) MGA(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) MGA(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) MGA(0): Supported detailed timing:
(II) MGA(0): clock: 85.5 MHz Image Size: 406 x 229 mm
(II) MGA(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
(II) MGA(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
(II) MGA(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 95 MHz
(II) MGA(0): Monitor name: W1943
(II) MGA(0): EDID (in hex):
(II) MGA(0): 00ffffffffffff001e6dad4b243e0300
(II) MGA(0): 271301036a291778ea2335a4554d9b25
(II) MGA(0): 125054a56a00314f454f614f01010101
(II) MGA(0): 010101010101662150b051001b304070
(II) MGA(0): 360096e51000001e0000000000000000
(II) MGA(0): 00000000000000000000000000fd0038
(II) MGA(0): 4b1e3d09000a202020202020000000fc
(II) MGA(0): 0057313934330a202020202020200075
(II) MGA(0): end of monitor info
(II) MGA(0): UNMAPPING framebuffer 0xFFFFFFFFB6CE0000, 0x600000.
(II) MGA(0): EDID vendor "GSM", prod id 19373
(II) MGA(0): Using EDID range info for horizontal sync
(II) MGA(0): Using EDID range info for vertical refresh
(II) MGA(0): Printing DDC gathered Modelines:
(II) MGA(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
(II) MGA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) MGA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) MGA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) MGA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) MGA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) MGA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) MGA(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) MGA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 17 MHz
(--) MGA(0): Max pixel clock is 220 MHz
(II) MGA(0): <default monitor>: Using hsync range of 30.00-61.00 kHz
(II) MGA(0): <default monitor>: Using vrefresh range of 56.00-75.00 Hz
(II) MGA(0): <default monitor>: Using maximum pixel clock of 95.00 MHz
(II) MGA(0): Estimated virtual size for aspect ratio 1.7826 is 1360x768
(II) MGA(0): Clock range: 17.75 to 220.00 MHz
(II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
(II) MGA(0): Not using default mode "360x200" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "512x384" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "512x384" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (height too large for virtual size)
(II) MGA(0): Not using default mode "576x432" (hsync out of range)
(II) MGA(0): Not using default mode "1280x960" (height too large for virtual size)
(II) MGA(0): Not using default mode "1280x960" (height too large for virtual size)
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (height too large for virtual size)
(II) MGA(0): Not using default mode "1152x864" (height too large for virtual size)
(II) MGA(0): Not using default mode "576x432" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (height too large for virtual size)
(II) MGA(0): Not using default mode "576x432" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (height too large for virtual size)
(II) MGA(0): Not using default mode "576x432" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (height too large for virtual size)
(II) MGA(0): Not using default mode "576x432" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (height too large for virtual size)
(II) MGA(0): Not using default mode "576x432" (hsync out of range)
(II) MGA(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1440x900" (width too large for virtual size)
(II) MGA(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) MGA(0): Not using default mode "800x512" (hsync out of range)
(II) MGA(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) MGA(0): Not using default mode "840x525" (hsync out of range)
(II) MGA(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) MGA(0): Not using default mode "840x525" (hsync out of range)
(II) MGA(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) MGA(0): Not using default mode "840x525" (hsync out of range)
(II) MGA(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) MGA(0): Not using default mode "840x525" (hsync out of range)
(II) MGA(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) MGA(0): Not using default mode "840x525" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1080" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x540" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x600" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(--) MGA(0): Virtual size is 1360x768 (pitch 1376)
(**) MGA(0): *Driver mode "1360x768": 85.5 MHz, 47.7 kHz, 60.0 Hz
(II) MGA(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
(**) MGA(0): *Default mode "1360x768": 84.8 MHz, 47.7 kHz, 59.8 Hz
(II) MGA(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(**) MGA(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(**) MGA(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) MGA(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(**) MGA(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) MGA(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) MGA(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) MGA(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(**) MGA(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) MGA(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(**) MGA(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) MGA(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) MGA(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) MGA(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) MGA(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) MGA(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) MGA(0): *Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
(II) MGA(0): Modeline "720x450"x59.9 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz)
(**) MGA(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) MGA(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(**) MGA(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz)
(**) MGA(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) MGA(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) MGA(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(**) MGA(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz)
(**) MGA(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
(II) MGA(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz)
(**) MGA(0): *Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
(II) MGA(0): Modeline "576x432"x60.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz)
(**) MGA(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz)
(**) MGA(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) MGA(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz)
(**) MGA(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
(**) MGA(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) MGA(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz)
(**) MGA(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) MGA(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz)
(**) MGA(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) MGA(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
(**) MGA(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) MGA(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) MGA(0): Display dimensions: (410, 230) mm
(**) MGA(0): DPI set to (84, 84)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) MGA(0): MAPPED Framebuffer DE000000 600000 to FFFFFFFFB6C71000.
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 64 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(EE) MGA(0): Static buffer allocation failed, not initializing the DRI
(EE) MGA(0): Need at least 12384 kB video memory at this resolution, bit depth
(II) MGA(0): Using 374 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Setting up tile and stipple cache:
20 128x128 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(==) MGA(0): DPMS enabled
(WW) MGA(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device PS/2 Logitech Mouse (/dev/input/event3)
(**) PS/2 Logitech Mouse: Applying InputClass "evdev pointer catchall"
(**) PS/2 Logitech Mouse: always reports core events
(**) PS/2 Logitech Mouse: Device: "/dev/input/event3"
(II) PS/2 Logitech Mouse: Found 3 mouse buttons
(II) PS/2 Logitech Mouse: Found relative axes
(II) PS/2 Logitech Mouse: Found x and y relative axes
(II) PS/2 Logitech Mouse: Configuring as mouse
(**) PS/2 Logitech Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Logitech Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Logitech Mouse" (type: MOUSE)
(II) PS/2 Logitech Mouse: initialized for relative axes.
(II) config/udev: Adding input device PS/2 Logitech Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Power Button: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) PS/2 Logitech Mouse: Device reopened after 1 attempts.
(II) PS/2 Logitech Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
udev information:
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1
N: input/event1
S: char/13:65
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:65
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd
P: /devices/platform/i8042/serio1/input/input3/event3
N: input/event3
S: char/13:67
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DEVLINKS=/dev/char/13:67 /dev/input/by-path/platform-i8042-serio-1-event-mouse
P: /devices/platform/i8042/serio1/input/input3/mouse0
N: input/mouse0
S: char/13:32
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input3/mouse0
E: MAJOR=13
E: MINOR=32
E: DEVNAME=/dev/input/mouse0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DEVLINKS=/dev/char/13:32 /dev/input/by-path/platform-i8042-serio-1-mouse
P: /devices/platform/pcspkr/input/input2/event2
N: input/event2
S: char/13:66
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DEVLINKS=/dev/char/13:66 /dev/input/by-path/platform-pcspkr-event-spkr
DRM Information from dmesg:
[ 2.345498] Linux agpgart interface v0.103
[ 2.345938] agpgart-intel 0000:00:00.0: Intel 440LX Chipset
[ 2.377918] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
-- System Information:
Debian Release: 6.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-mga depends on:
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
ii xserver-xorg-core [xorg-video 2:1.7.7-11 Xorg X server - core server
xserver-xorg-video-mga recommends no packages.
Versions of packages xserver-xorg-video-mga suggests:
pn firmware-linux <none> (no description available)
-- no debconf information
Reply to: