Bug#617608: /usr/bin/Xorg: infinite loop after resuming virtualbox VM
Package: xserver-xorg-core
Version: 2:1.9.4.901-1
Severity: important
File: /usr/bin/Xorg
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I suspended and then resumed my Virtualbox virtual machine, and the
server froze.
- -- Package-specific info:
X server symlink status:
- ------------------------
lrwxrwxrwx 1 root root 13 May 22 2009 /etc/X11/X -> /usr/bin/Xorg
- -rwxr-xr-x 1 root root 1926304 Mar 7 15:48 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
- ----------------------------------
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef]
Xorg X server configuration file status:
- ----------------------------------------
- -rw-r--r-- 1 root root 1377 Jun 19 2010 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
- -------------------------------
#xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
#Section "Device"
# Identifier "Some Device"
# Driver "vboxvideo"
#EndSection
#Section "InputDevice"
# Identifier "Some Mouse"
# Driver "vboxmouse"
# CorePointer only necessary if there is another mouse device (damn hotplug!)
# Option "CorePointer"
#EndSection
#Section "Screen"
# Identifier "Some Screen"
# Device "Some Device"
#SubSection "Display"
# Modes not necessary when auto-resize x11 client is running
#Modes "1920x1200"
#EndSubSection
#EndSection
Section "ServerFlags"
#Option "AutoAddDevices" "false"
Option "AllowDeactivateGrabs" "true"
Option "AllowClosedownGrabs" "true"
EndSection
# vim: sts=0
#Section "InputDevice"
# Identifier "VBoxMouse"
# Driver "vboxmouse"
# Option "CorePointer"
#EndSection
/etc/X11/xorg.conf.d does not exist.
/etc/modprobe.d contains no KMS configuration files.
Kernel version (/proc/version):
- -------------------------------
Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
Xorg X server log files on system:
- ----------------------------------
- -rw-r--r-- 1 root root 21009 Aug 22 2009 /var/log/Xorg.20.log
- -rw-r--r-- 1 root root 27525 Aug 1 2010 /var/log/Xorg.1.log
- -rw-r--r-- 1 root root 46895 Mar 9 21:51 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
- ---------------------------------------------------------------------
[ 8.332]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[ 8.333] X Protocol Version 11, Revision 0
[ 8.333] Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
[ 8.333] Current Operating System: Linux wintermute 2.6.32-5-amd64 #1 SMP Wed Jan 12 03:40:32 UTC 2011 x86_64
[ 8.333] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=5b4ecb9d-aa51-41a0-833e-ffa702725bf5 ro console=ttyS0 console=tty0 quiet
[ 8.333] Build Date: 20 February 2011 04:48:15AM
[ 8.333] xorg-server 2:1.9.4-3 (Cyril Brulebois <kibi@debian.org>)
[ 8.333] Current version of pixman: 0.21.4
[ 8.333] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8.333] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.333] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 5 21:47:25 2011
[ 8.336] (==) Using config file: "/etc/X11/xorg.conf"
[ 8.336] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8.337] (==) No Layout section. Using the first Screen section.
[ 8.337] (==) No screen section available. Using defaults.
[ 8.337] (**) |-->Screen "Default Screen Section" (0)
[ 8.337] (**) | |-->Monitor "<default monitor>"
[ 8.337] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.338] (==) Automatically adding devices
[ 8.338] (==) Automatically enabling devices
[ 8.355] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 8.355] Entry deleted from font path.
[ 8.379] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 8.379] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.379] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.379] (II) Loader magic: 0x7cfac0
[ 8.379] (II) Module ABI versions:
[ 8.379] X.Org ANSI C Emulation: 0.4
[ 8.379] X.Org Video Driver: 8.0
[ 8.379] X.Org XInput driver : 11.0
[ 8.379] X.Org Server Extension : 4.0
[ 8.384] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/33554432
[ 8.384] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 8.384] (II) LoadModule: "extmod"
[ 8.385] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 8.399] (II) Module extmod: vendor="X.Org Foundation"
[ 8.399] compiled for 1.9.4, module version = 1.0.0
[ 8.399] Module class: X.Org Server Extension
[ 8.399] ABI class: X.Org Server Extension, version 4.0
[ 8.399] (II) Loading extension SELinux
[ 8.399] (II) Loading extension MIT-SCREEN-SAVER
[ 8.399] (II) Loading extension XFree86-VidModeExtension
[ 8.399] (II) Loading extension XFree86-DGA
[ 8.399] (II) Loading extension DPMS
[ 8.399] (II) Loading extension XVideo
[ 8.399] (II) Loading extension XVideo-MotionCompensation
[ 8.399] (II) Loading extension X-Resource
[ 8.399] (II) LoadModule: "dbe"
[ 8.399] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 8.400] (II) Module dbe: vendor="X.Org Foundation"
[ 8.400] compiled for 1.9.4, module version = 1.0.0
[ 8.400] Module class: X.Org Server Extension
[ 8.400] ABI class: X.Org Server Extension, version 4.0
[ 8.400] (II) Loading extension DOUBLE-BUFFER
[ 8.400] (II) LoadModule: "glx"
[ 8.400] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.405] (II) Module glx: vendor="X.Org Foundation"
[ 8.405] compiled for 1.9.4, module version = 1.0.0
[ 8.405] ABI class: X.Org Server Extension, version 4.0
[ 8.405] (==) AIGLX enabled
[ 8.405] (II) Loading extension GLX
[ 8.408] (II) LoadModule: "record"
[ 8.408] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 8.420] (II) Module record: vendor="X.Org Foundation"
[ 8.420] compiled for 1.9.4, module version = 1.13.0
[ 8.420] Module class: X.Org Server Extension
[ 8.420] ABI class: X.Org Server Extension, version 4.0
[ 8.420] (II) Loading extension RECORD
[ 8.420] (II) LoadModule: "dri"
[ 8.420] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 8.440] (II) Module dri: vendor="X.Org Foundation"
[ 8.440] compiled for 1.9.4, module version = 1.0.0
[ 8.440] ABI class: X.Org Server Extension, version 4.0
[ 8.440] (II) Loading extension XFree86-DRI
[ 8.440] (II) LoadModule: "dri2"
[ 8.441] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 8.442] (II) Module dri2: vendor="X.Org Foundation"
[ 8.442] compiled for 1.9.4, module version = 1.2.0
[ 8.442] ABI class: X.Org Server Extension, version 4.0
[ 8.442] (II) Loading extension DRI2
[ 8.442] (==) Matched vboxvideo as autoconfigured driver 0
[ 8.442] (==) Matched vesa as autoconfigured driver 1
[ 8.442] (==) Matched fbdev as autoconfigured driver 2
[ 8.442] (==) Assigned the driver to the xf86ConfigLayout
[ 8.442] (II) LoadModule: "vboxvideo"
[ 8.443] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo_drv.so
[ 8.465] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 8.465] compiled for 1.9.4, module version = 1.0.1
[ 8.465] Module class: X.Org Video Driver
[ 8.465] ABI class: X.Org Video Driver, version 8.0
[ 8.465] (**) Load address of symbol "VBOXVIDEO" is 0x7f6bfe257260
[ 8.465] (II) LoadModule: "vesa"
[ 8.466] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 8.482] (II) Module vesa: vendor="X.Org Foundation"
[ 8.482] compiled for 1.9.4, module version = 2.3.0
[ 8.482] Module class: X.Org Video Driver
[ 8.482] ABI class: X.Org Video Driver, version 8.0
[ 8.482] (II) LoadModule: "fbdev"
[ 8.483] (WW) Warning, couldn't open module fbdev
[ 8.483] (II) UnloadModule: "fbdev"
[ 8.483] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 8.483] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 8.483] (II) VESA: driver for VESA chipsets: vesa
[ 8.483] (++) using VT number 7
[ 8.500] (WW) Falling back to old probe method for vesa
[ 8.500] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.0.4_OSE
[ 8.501] (II) Loading sub module "ramdac"
[ 8.501] (II) LoadModule: "ramdac"
[ 8.501] (II) Module "ramdac" already built-in
[ 8.501] (II) Loading sub module "vbe"
[ 8.501] (II) LoadModule: "vbe"
[ 8.501] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 8.505] (II) Module vbe: vendor="X.Org Foundation"
[ 8.505] compiled for 1.9.4, module version = 1.1.0
[ 8.505] ABI class: X.Org Video Driver, version 8.0
[ 8.505] (II) Loading sub module "fb"
[ 8.505] (II) LoadModule: "fb"
[ 8.505] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 8.529] (II) Module fb: vendor="X.Org Foundation"
[ 8.529] compiled for 1.9.4, module version = 1.0.0
[ 8.529] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.529] (II) Loading sub module "shadowfb"
[ 8.529] (II) LoadModule: "shadowfb"
[ 8.529] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 8.530] (II) Module shadowfb: vendor="X.Org Foundation"
[ 8.530] compiled for 1.9.4, module version = 1.0.0
[ 8.530] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.530] (II) Loading sub module "vgahw"
[ 8.530] (II) LoadModule: "vgahw"
[ 8.530] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 8.530] (II) Module vgahw: vendor="X.Org Foundation"
[ 8.530] compiled for 1.9.4, module version = 0.1.0
[ 8.530] ABI class: X.Org Video Driver, version 8.0
[ 8.530] (II) Loading sub module "dri"
[ 8.530] (II) LoadModule: "dri"
[ 8.531] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
[ 8.532] (II) VBoxVideo(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.532] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[ 8.532] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[ 8.532] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 132.1 MHz (scaled from 0.0 MHz), 68.6 kHz, 60.0 Hz
[ 8.532] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 132.09 1920 1922 1924 1926 1137 1139 1141 1143 (68.6 kHz)
[ 8.532] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 132.1 MHz (scaled from 0.0 MHz), 68.6 kHz, 60.0 Hz
[ 8.532] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 132.09 1920 1922 1924 1926 1137 1139 1141 1143 (68.6 kHz)
[ 8.532] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 132.1 MHz (scaled from 0.0 MHz), 68.6 kHz, 60.0 Hz
[ 8.532] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 132.09 1920 1922 1924 1926 1137 1139 1141 1143 (68.6 kHz)
[ 8.532] (**) VBoxVideo(0): Built-in mode "VBox-1440x1050": 91.6 MHz (scaled from 0.0 MHz), 63.4 kHz, 60.0 Hz
[ 8.532] (II) VBoxVideo(0): Modeline "VBox-1440x1050"x0.0 91.62 1440 1442 1444 1446 1050 1052 1054 1056 (63.4 kHz)
[ 8.532] (**) VBoxVideo(0): Built-in mode "VBox-1280x960": 74.5 MHz (scaled from 0.0 MHz), 58.0 kHz, 60.0 Hz
[ 8.532] (II) VBoxVideo(0): Modeline "VBox-1280x960"x0.0 74.54 1280 1282 1284 1286 960 962 964 966 (58.0 kHz)
[ 8.532] (**) VBoxVideo(0): Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 8.532] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz)
[ 8.532] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 8.532] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz)
[ 8.532] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[ 8.532] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz)
[ 8.532] (==) VBoxVideo(0): RGB weight 888
[ 8.532] (==) VBoxVideo(0): Default visual is TrueColor
[ 8.532] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[ 8.532] (==) VBoxVideo(0): DPI set to (96, 96)
[ 8.532] (II) UnloadModule: "vesa"
[ 8.532] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 8.532] (--) Depth 24 pixmap format is 32 bpp
[ 8.533] (II) Loading sub module "int10"
[ 8.533] (II) LoadModule: "int10"
[ 8.533] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 8.534] (II) Module int10: vendor="X.Org Foundation"
[ 8.534] compiled for 1.9.4, module version = 1.0.0
[ 8.534] ABI class: X.Org Video Driver, version 8.0
[ 8.534] (II) VBoxVideo(0): initializing int10
[ 8.535] (II) VBoxVideo(0): Primary V_BIOS segment is: 0xc000
[ 8.538] (II) VBoxVideo(0): VESA BIOS detected
[ 8.538] (II) VBoxVideo(0): VESA VBE Version 2.0
[ 8.538] (II) VBoxVideo(0): VESA VBE Total Mem: 22528 kB
[ 8.538] (II) VBoxVideo(0): VESA VBE OEM: VirtualBox VBE BIOS http://www.virtualbox.org/
[ 8.538] (II) VBoxVideo(0): VESA VBE OEM Software Rev: 0.2
[ 8.538] (II) VBoxVideo(0): VESA VBE OEM Vendor: Oracle Corporation
[ 8.538] (II) VBoxVideo(0): VESA VBE OEM Product: Oracle VM VirtualBox VBE Adapter
[ 8.538] (II) VBoxVideo(0): VESA VBE OEM Product Rev: Oracle VM VirtualBox Version 4.0.4
[ 9.372] (==) VBoxVideo(0): Default visual is TrueColor
[ 9.372] drmOpenDevice: node name is /dev/dri/card0
[ 9.417] drmOpenDevice: node name is /dev/dri/card0
[ 9.518] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 9.518] drmOpenDevice: node name is /dev/dri/card0
[ 9.518] drmOpenDevice: open result is 11, (OK)
[ 9.518] drmOpenByBusid: drmOpenMinor returns 11
[ 9.518] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 9.518] (II) [drm] loaded kernel module for "vboxvideo" driver.
[ 9.518] (II) [drm] DRM interface version 1.3
[ 9.518] (II) [drm] DRM open master succeeded.
[ 9.518] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
[ 9.518] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
[ 9.518] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel
[ 9.518] (II) VBoxVideo(0): X context handle = 0x1
[ 9.518] (II) VBoxVideo(0): [drm] installed DRM signal handler
[ 9.518] (II) VBoxVideo(0): visual configurations initialized
[ 9.562] (==) VBoxVideo(0): Backing store disabled
[ 9.562] (II) VBoxVideo(0): Requested monitor count: 1
[ 9.562] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 9.562] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 9.563] (II) VBoxVideo(0): EDID for output VBOX0
[ 9.563] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 74516352
[ 9.563] (II) VBoxVideo(0): Year: 1990 Week: 1
[ 9.563] (II) VBoxVideo(0): EDID Version: 1.3
[ 9.563] (II) VBoxVideo(0): Digital Display Input
[ 9.563] (II) VBoxVideo(0): Indeterminate output size
[ 9.563] (II) VBoxVideo(0): Gamma: 2.20
[ 9.563] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[ 9.563] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 9.563] (II) VBoxVideo(0): Default color space is primary color space
[ 9.563] (II) VBoxVideo(0): First detailed timing is preferred mode
[ 9.563] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 9.563] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 9.563] (II) VBoxVideo(0): Manufacturer's mask: 0
[ 9.563] (II) VBoxVideo(0): Supported detailed timing:
[ 9.563] (II) VBoxVideo(0): clock: 132.1 MHz Image Size: 0 x 0 mm
[ 9.563] (II) VBoxVideo(0): h_active: 1920 h_sync: 1922 h_sync_end 1924 h_blank_end 1926 h_border: 0
[ 9.563] (II) VBoxVideo(0): v_active: 1137 v_sync: 1139 v_sync_end 1141 v_blanking: 1143 v_border: 0
[ 9.563] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[ 9.563] (II) VBoxVideo(0): Monitor name: VBOX monitor
[ 9.563] (II) VBoxVideo(0): EDID (in hex):
[ 9.563] (II) VBoxVideo(0): 00ffffffffffff005858000080077104
[ 9.563] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
[ 9.563] (II) VBoxVideo(0): 0f505400000001010101010101010101
[ 9.563] (II) VBoxVideo(0): 01010101010198338006707106400202
[ 9.563] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
[ 9.563] (II) VBoxVideo(0): c864000a202020202020000000fc0056
[ 9.564] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
[ 9.564] (II) VBoxVideo(0): 000a20202020202020202020202000cb
[ 9.564] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 9.564] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 9.564] (II) VBoxVideo(0): Using hsync ranges from config file
[ 9.564] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 9.564] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 9.564] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 9.564] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[ 9.564] (II) VBoxVideo(0): Modeline "1920x1137"x60.0 132.09 1920 1922 1924 1926 1137 1139 1141 1143 (68.6 kHz)
[ 9.564] (II) VBoxVideo(0): Modeline "1440x1050"x60.0 91.62 1440 1442 1444 1446 1050 1052 1054 1056 (63.4 kHz)
[ 9.564] (II) VBoxVideo(0): Modeline "1280x960"x60.0 74.54 1280 1282 1284 1286 960 962 964 966 (58.0 kHz)
[ 9.564] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz)
[ 9.564] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz)
[ 9.564] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz)
[ 9.564] (II) VBoxVideo(0): Output VBOX0 connected
[ 9.564] (II) VBoxVideo(0): Using exact sizes for initial modes
[ 9.564] (II) VBoxVideo(0): Output VBOX0 using initial mode 1920x1137
[ 9.564] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 9.564] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9.606] (==) VBoxVideo(0): DPMS enabled
[ 9.609] (II) VBoxVideo(0): [DRI] installation complete
[ 9.609] (--) RandR disabled
[ 9.609] (II) Initializing built-in extension Generic Event Extension
[ 9.609] (II) Initializing built-in extension SHAPE
[ 9.609] (II) Initializing built-in extension MIT-SHM
[ 9.609] (II) Initializing built-in extension XInputExtension
[ 9.609] (II) Initializing built-in extension XTEST
[ 9.609] (II) Initializing built-in extension BIG-REQUESTS
[ 9.609] (II) Initializing built-in extension SYNC
[ 9.609] (II) Initializing built-in extension XKEYBOARD
[ 9.609] (II) Initializing built-in extension XC-MISC
[ 9.609] (II) Initializing built-in extension XINERAMA
[ 9.609] (II) Initializing built-in extension XFIXES
[ 9.609] (II) Initializing built-in extension RENDER
[ 9.609] (II) Initializing built-in extension RANDR
[ 9.609] (II) Initializing built-in extension COMPOSITE
[ 9.609] (II) Initializing built-in extension DAMAGE
[ 9.609] (II) SELinux: Disabled on system
[ 9.629] (II) AIGLX: Screen 0 is not DRI2 capable
[ 9.629] drmOpenDevice: node name is /dev/dri/card0
[ 9.629] drmOpenDevice: open result is 12, (OK)
[ 9.629] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 9.629] drmOpenDevice: node name is /dev/dri/card0
[ 9.629] drmOpenDevice: open result is 12, (OK)
[ 9.629] drmOpenByBusid: drmOpenMinor returns 12
[ 9.629] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 9.671] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
[ 9.671] (II) The file referenced, is *NOT* loaded
[ 9.671] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
[ 9.671] (EE) AIGLX error: vboxvideo does not export required DRI extension
[ 9.671] (EE) AIGLX: reverting to software rendering
[ 9.726] (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
[ 9.726] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 9.727] (II) VBoxVideo(0): Setting screen physical size to 508 x 300
[ 10.488] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 10.488] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.488] (II) LoadModule: "evdev"
[ 10.488] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.502] (II) Module evdev: vendor="X.Org Foundation"
[ 10.502] compiled for 1.9.4, module version = 2.6.0
[ 10.502] Module class: X.Org XInput Driver
[ 10.502] ABI class: X.Org XInput driver, version 11.0
[ 10.502] (**) Power Button: always reports core events
[ 10.502] (**) Power Button: Device: "/dev/input/event4"
[ 10.521] (--) Power Button: Found keys
[ 10.521] (II) Power Button: Configuring as keyboard
[ 10.521] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 10.521] (**) Option "xkb_rules" "evdev"
[ 10.521] (**) Option "xkb_model" "pc105"
[ 10.521] (**) Option "xkb_layout" "gb"
[ 10.521] (**) Option "xkb_options" "lv3:ralt_switch"
[ 10.684] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 10.684] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 10.684] (**) Sleep Button: always reports core events
[ 10.684] (**) Sleep Button: Device: "/dev/input/event5"
[ 10.704] (--) Sleep Button: Found keys
[ 10.704] (II) Sleep Button: Configuring as keyboard
[ 10.704] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 10.704] (**) Option "xkb_rules" "evdev"
[ 10.704] (**) Option "xkb_model" "pc105"
[ 10.704] (**) Option "xkb_layout" "gb"
[ 10.716] (**) Option "xkb_options" "lv3:ralt_switch"
[ 10.718] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event2)
[ 10.718] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[ 10.718] (**) VirtualBox USB Tablet: always reports core events
[ 10.718] (**) VirtualBox USB Tablet: Device: "/dev/input/event2"
[ 10.744] (--) VirtualBox USB Tablet: Found 9 mouse buttons
[ 10.744] (--) VirtualBox USB Tablet: Found scroll wheel(s)
[ 10.744] (--) VirtualBox USB Tablet: Found relative axes
[ 10.744] (--) VirtualBox USB Tablet: Found absolute axes
[ 10.744] (--) VirtualBox USB Tablet: Found x and y absolute axes
[ 10.744] (II) VirtualBox USB Tablet: Configuring as mouse
[ 10.744] (II) VirtualBox USB Tablet: Adding scrollwheel support
[ 10.744] (**) VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[ 10.744] (**) VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.744] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE)
[ 10.744] (EE) VirtualBox USB Tablet: failed to initialize for relative axes.
[ 10.744] (II) VirtualBox USB Tablet: initialized for absolute axes.
[ 10.745] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[ 10.745] (II) No input driver/identifier specified (ignoring)
[ 10.745] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1)
[ 10.745] (II) No input driver/identifier specified (ignoring)
[ 10.747] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[ 10.747] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.747] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.747] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
[ 10.756] (--) AT Translated Set 2 keyboard: Found keys
[ 10.756] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 10.756] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 10.756] (**) Option "xkb_rules" "evdev"
[ 10.756] (**) Option "xkb_model" "pc105"
[ 10.756] (**) Option "xkb_layout" "gb"
[ 10.756] (**) Option "xkb_options" "lv3:ralt_switch"
[ 10.757] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event6)
[ 10.757] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 10.757] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 10.757] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event6"
[ 10.772] (--) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 10.772] (--) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 10.772] (--) ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 10.772] (--) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 10.772] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 10.772] (II) ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 10.772] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 10.772] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.772] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
[ 10.772] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 10.772] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 10.772] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 10.773] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 10.773] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 10.773] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse2)
[ 10.773] (II) No input driver/identifier specified (ignoring)
[ 10.773] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 10.773] (II) No input driver/identifier specified (ignoring)
[ 10.776] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
[ 10.776] (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
[ 10.776] (**) Macintosh mouse button emulation: always reports core events
[ 10.776] (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
[ 10.788] (--) Macintosh mouse button emulation: Found 3 mouse buttons
[ 10.788] (--) Macintosh mouse button emulation: Found relative axes
[ 10.788] (--) Macintosh mouse button emulation: Found x and y relative axes
[ 10.788] (II) Macintosh mouse button emulation: Configuring as mouse
[ 10.788] (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
[ 10.788] (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.788] (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
[ 10.788] (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
[ 10.788] (**) Macintosh mouse button emulation: (accel) acceleration profile 0
[ 10.789] (**) Macintosh mouse button emulation: (accel) acceleration factor: 2.000
[ 10.789] (**) Macintosh mouse button emulation: (accel) acceleration threshold: 4
[ 10.789] (II) Macintosh mouse button emulation: initialized for relative axes.
[ 10.789] (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
[ 10.789] (II) No input driver/identifier specified (ignoring)
[ 10.790] (II) config/udev: Adding input device (unnamed) (/dev/vboxguest)
[ 10.790] (**) (unnamed): Applying InputClass "vboxmouse"
[ 10.790] (II) LoadModule: "vboxmouse"
[ 10.790] (II) Loading /usr/lib/xorg/modules/input/vboxmouse_drv.so
[ 10.811] (II) Module vboxmouse: vendor="Oracle Corporation"
[ 10.811] compiled for 0.0.0, module version = 1.0.0
[ 10.811] Module class: X.Org XInput Driver
[ 10.811] ABI class: X.Org XInput driver, version 11.0
[ 10.811] (**) Load address of symbol "VBOXMOUSE" is 0x7f6bfb50f8a0
[ 10.811] (**) (unnamed): always reports core events
[ 10.811] (**) (unnamed): Device: "/dev/vboxguest"
[ 10.811] (II) XINPUT: Adding extended input device "(unnamed)" (type: MOUSE)
[ 10.811] (**) (unnamed): (accel) keeping acceleration scheme 1
[ 10.811] (**) (unnamed): (accel) acceleration profile 0
[ 10.812] (**) (unnamed): (accel) acceleration factor: 2.000
[ 10.812] (**) (unnamed): (accel) acceleration threshold: 4
[ 10.812] (II) (unnamed): On.
[ 13.218] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 13.218] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 13.218] (II) VBoxVideo(0): Using hsync ranges from config file
[ 13.218] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 13.218] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 13.218] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 13.230] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 13.230] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 13.230] (II) VBoxVideo(0): Using hsync ranges from config file
[ 13.230] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 13.230] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 13.230] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 13.307] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 13.307] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 13.307] (II) VBoxVideo(0): Using hsync ranges from config file
[ 13.307] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 13.307] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 13.307] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 168.064] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 168.064] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 168.064] (II) VBoxVideo(0): Using hsync ranges from config file
[ 168.064] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 168.064] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 168.064] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 168.071] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 168.071] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 168.071] (II) VBoxVideo(0): Using hsync ranges from config file
[ 168.071] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 168.071] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 168.071] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 168.075] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 168.075] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 168.075] (II) VBoxVideo(0): Using hsync ranges from config file
[ 168.075] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 168.076] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 168.076] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 170.459] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 170.459] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 170.459] (II) VBoxVideo(0): Using hsync ranges from config file
[ 170.459] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 170.459] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 170.459] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 170.982] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 170.982] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 170.982] (II) VBoxVideo(0): Using hsync ranges from config file
[ 170.982] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 170.982] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 170.982] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 37976.962] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 37976.962] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 37976.962] (II) VBoxVideo(0): Using hsync ranges from config file
[ 37976.962] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 37976.962] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 37976.962] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 52601.754] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 52601.754] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 52601.754] (II) VBoxVideo(0): Using hsync ranges from config file
[ 52601.754] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 52601.754] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 52601.754] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 67303.235] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67303.252] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync.
[ 67303.252] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67303.252] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67303.252] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67303.252] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz)
[ 67303.375] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67303.375] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync.
[ 67303.375] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67303.375] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67303.375] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67303.375] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz)
[ 67303.790] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67303.790] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync.
[ 67303.790] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67303.790] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67303.790] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67303.790] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz)
[ 67305.022] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.022] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync.
[ 67305.022] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.022] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.022] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.022] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz)
[ 67305.022] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.022] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync.
[ 67305.022] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.022] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.023] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.023] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz)
[ 67305.023] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.023] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync.
[ 67305.023] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.023] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.023] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.023] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz)
[ 67305.024] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.024] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync.
[ 67305.024] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.024] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.024] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.024] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz)
[ 67305.124] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.124] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync.
[ 67305.124] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.124] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.124] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.124] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz)
[ 67305.124] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.124] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync.
[ 67305.124] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.124] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.124] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.124] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz)
[ 67305.128] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.128] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync.
[ 67305.128] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.128] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.128] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.128] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz)
[ 67305.131] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.131] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync.
[ 67305.131] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.131] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.131] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.131] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz)
[ 67305.174] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.174] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync.
[ 67305.174] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.174] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.174] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.174] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz)
[ 67305.195] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.195] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 67305.195] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.195] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.195] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.195] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 67305.274] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.274] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 67305.275] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.275] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.275] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.275] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 67305.526] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.526] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 67305.526] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.526] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.526] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.526] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 67305.530] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.530] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 67305.530] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.530] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.530] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.530] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 67305.547] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.547] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 67305.547] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.547] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.547] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.547] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 67305.550] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.550] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 67305.550] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.550] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.550] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.550] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 67305.558] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.558] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 67305.558] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.558] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.558] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.558] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 67305.563] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.563] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 67305.563] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.563] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.563] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.563] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 67305.573] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.573] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 67305.573] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.573] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.573] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.573] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 67305.578] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 67305.578] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1920x1137 Warning: We only handle separate sync.
[ 67305.578] (II) VBoxVideo(0): Using hsync ranges from config file
[ 67305.578] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 67305.578] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 67305.578] (II) VBoxVideo(0): Modeline "1920x1137"x0.0 132.08 1920 1922 1924 1926 1137 1139 1141 1143 -hsync -vsync (68.6 kHz)
[ 87015.115] (II) config/udev: removing device VirtualBox USB Tablet
[ 87015.486] (II) VirtualBox USB Tablet: Close
[ 87015.486] (II) UnloadModule: "evdev"
[ 87015.787] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event2)
[ 87015.795] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[ 87015.800] (**) VirtualBox USB Tablet: always reports core events
[ 87015.800] (**) VirtualBox USB Tablet: Device: "/dev/input/event2"
[ 87015.816] (--) VirtualBox USB Tablet: Found 9 mouse buttons
[ 87015.816] (--) VirtualBox USB Tablet: Found scroll wheel(s)
[ 87015.816] (--) VirtualBox USB Tablet: Found relative axes
[ 87015.816] (--) VirtualBox USB Tablet: Found absolute axes
[ 87015.816] (--) VirtualBox USB Tablet: Found x and y absolute axes
[ 87015.816] (II) VirtualBox USB Tablet: Configuring as mouse
[ 87015.816] (II) VirtualBox USB Tablet: Adding scrollwheel support
[ 87015.816] (**) VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[ 87015.816] (**) VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 87015.816] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE)
[ 87015.816] (EE) VirtualBox USB Tablet: failed to initialize for relative axes.
[ 87015.816] (II) VirtualBox USB Tablet: initialized for absolute axes.
[ 87015.817] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1)
[ 87015.817] (II) No input driver/identifier specified (ignoring)
[ 87015.817] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[ 87015.817] (II) No input driver/identifier specified (ignoring)
[ 87046.768] [mi] EQ overflowing. The server is probably stuck in an infinite loop.
[ 87046.768]
Backtrace:
[ 87046.834] 0: /usr/bin/Xorg (xorg_backtrace+0x28) [0x45ceb8]
[ 87046.834] 1: /usr/bin/Xorg (mieqEnqueue+0x1f4) [0x45cd34]
[ 87046.844] 2: /usr/bin/Xorg (xf86PostMotionEventP+0xc4) [0x46ddb4]
[ 87046.844] 3: /usr/bin/Xorg (xf86PostMotionEvent+0xa9) [0x46df59]
[ 87046.844] 4: /usr/lib/xorg/modules/input/vboxmouse_drv.so (0x7f6bfb2bf000+0x176bf) [0x7f6bfb2d66bf]
[ 87046.844] 5: /usr/bin/Xorg (0x400000+0x74277) [0x474277]
[ 87046.844] 6: /usr/bin/Xorg (0x400000+0x1046f3) [0x5046f3]
[ 87046.844] 7: /lib/libpthread.so.0 (0x7f6c012b3000+0xef60) [0x7f6c012c1f60]
[ 87046.844] 8: /lib/libc.so.6 (memcpy+0x35) [0x7f6c00077785]
[ 87046.844] 9: /usr/lib/xorg/modules/libfb.so (fbBlt+0xfc) [0x7f6bfd9d9c3c]
[ 87046.844] 10: /usr/lib/xorg/modules/libfb.so (fbOddTile+0x16e) [0x7f6bfd9e72ee]
[ 87046.844] 11: /usr/lib/xorg/modules/libfb.so (fbFill+0x45b) [0x7f6bfd9ddabb]
[ 87046.844] 12: /usr/lib/xorg/modules/libfb.so (fbPolyFillRect+0x175) [0x7f6bfd9dde75]
[ 87046.844] 13: /usr/lib/xorg/modules/libshadowfb.so (0x7f6bfd7c1000+0x24f9) [0x7f6bfd7c34f9]
[ 87046.844] 14: /usr/bin/Xorg (0x400000+0xcc08d) [0x4cc08d]
[ 87046.844] 15: /usr/bin/Xorg (miPaintWindow+0x1aa) [0x45a11a]
[ 87046.844] 16: /usr/bin/Xorg (miWindowExposures+0xc8) [0x45a658]
[ 87046.844] 17: /usr/lib/xorg/modules/extensions/libdri.so (DRIWindowExposures+0x9c) [0x7f6bfe66fc5c]
[ 87046.844] 18: /usr/bin/Xorg (miHandleValidateExposures+0x68) [0x55e7a8]
[ 87046.844] 19: /usr/bin/Xorg (miMoveWindow+0x21d) [0x55d9bd]
[ 87046.845] 20: /usr/bin/Xorg (0x400000+0x124bde) [0x524bde]
[ 87046.845] 21: /usr/bin/Xorg (ConfigureWindow+0x526) [0x455e16]
[ 87046.845] 22: /usr/bin/Xorg (0x400000+0x31f94) [0x431f94]
[ 87046.845] 23: /usr/bin/Xorg (0x400000+0x32e19) [0x432e19]
[ 87046.845] 24: /usr/bin/Xorg (0x400000+0x2573b) [0x42573b]
[ 87046.845] 25: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f6c00016c4d]
[ 87046.845] 26: /usr/bin/Xorg (0x400000+0x252c9) [0x4252c9]
udev information:
- -----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:68
E: XKBOPTIONS=lv3:ralt_switch
E: DMI_VENDOR=innotek GmbH
P: /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5/event5
N: input/event5
S: char/13:69
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSLPBN:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:69
E: XKBOPTIONS=lv3:ralt_switch
E: DMI_VENDOR=innotek GmbH
P: /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input7/event2
N: input/event2
S: char/13:66
S: input/by-id/usb-VirtualBox_USB_Tablet-event-mouse
S: input/by-path/pci-0000:00:06.0-usb-0:1:1.0-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input7/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=VirtualBox
E: ID_VENDOR_ENC=VirtualBox
E: ID_VENDOR_ID=80ee
E: ID_MODEL=USB_Tablet
E: ID_MODEL_ENC=USB\x20Tablet
E: ID_MODEL_ID=0021
E: ID_REVISION=0100
E: ID_SERIAL=VirtualBox_USB_Tablet
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:06.0-usb-0:1:1.0
E: DEVLINKS=/dev/char/13:66 /dev/input/by-id/usb-VirtualBox_USB_Tablet-event-mouse /dev/input/by-path/pci-0000:00:06.0-usb-0:1:1.0-event-mouse
P: /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input7/js0
N: input/js0
S: char/13:0
S: input/by-id/usb-VirtualBox_USB_Tablet-mouse
S: input/by-path/pci-0000:00:06.0-usb-0:1:1.0-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input7/js0
E: MAJOR=13
E: MINOR=0
E: DEVNAME=/dev/input/js0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=VirtualBox
E: ID_VENDOR_ENC=VirtualBox
E: ID_VENDOR_ID=80ee
E: ID_MODEL=USB_Tablet
E: ID_MODEL_ENC=USB\x20Tablet
E: ID_MODEL_ID=0021
E: ID_REVISION=0100
E: ID_SERIAL=VirtualBox_USB_Tablet
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:06.0-usb-0:1:1.0
E: DEVLINKS=/dev/char/13:0 /dev/input/by-id/usb-VirtualBox_USB_Tablet-mouse /dev/input/by-path/pci-0000:00:06.0-usb-0:1:1.0-mouse
P: /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input7/mouse1
N: input/mouse1
S: char/13:33
S: input/by-id/usb-VirtualBox_USB_Tablet-mouse
S: input/by-path/pci-0000:00:06.0-usb-0:1:1.0-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input7/mouse1
E: MAJOR=13
E: MINOR=33
E: DEVNAME=/dev/input/mouse1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=VirtualBox
E: ID_VENDOR_ENC=VirtualBox
E: ID_VENDOR_ID=80ee
E: ID_MODEL=USB_Tablet
E: ID_MODEL_ENC=USB\x20Tablet
E: ID_MODEL_ID=0021
E: ID_REVISION=0100
E: ID_SERIAL=VirtualBox_USB_Tablet
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:06.0-usb-0:1:1.0
E: DEVLINKS=/dev/char/13:33 /dev/input/by-id/usb-VirtualBox_USB_Tablet-mouse /dev/input/by-path/pci-0000:00:06.0-usb-0:1:1.0-mouse
P: /devices/platform/i8042/serio0/input/input1/event1
N: input/event1
S: char/13:65
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=gb
E: DEVLINKS=/dev/char/13:65 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=lv3:ralt_switch
E: DMI_VENDOR=innotek GmbH
P: /devices/platform/i8042/serio1/input/input6/event6
N: input/event6
S: char/13:70
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DMI_VENDOR=innotek GmbH
E: DEVLINKS=/dev/char/13:70 /dev/input/by-path/platform-i8042-serio-1-event-mouse
P: /devices/platform/i8042/serio1/input/input6/mouse2
N: input/mouse2
S: char/13:34
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse2
E: MAJOR=13
E: MINOR=34
E: DEVNAME=/dev/input/mouse2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DEVLINKS=/dev/char/13:34 /dev/input/by-path/platform-i8042-serio-1-mouse
P: /devices/platform/pcspkr/input/input3/event3
N: input/event3
S: char/13:67
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=innotek GmbH
E: DEVLINKS=/dev/char/13:67 /dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/virtual/input/input0/event0
N: input/event0
S: char/13:64
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: DMI_VENDOR=innotek GmbH
E: DEVLINKS=/dev/char/13:64
P: /devices/virtual/input/input0/mouse0
N: input/mouse0
S: char/13:32
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input0/mouse0
E: MAJOR=13
E: MINOR=32
E: DEVNAME=/dev/input/mouse0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: DEVLINKS=/dev/char/13:32
P: /devices/virtual/misc/vboxguest
N: vboxguest
S: char/10:59
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/misc/vboxguest
E: MAJOR=10
E: MINOR=59
E: DEVNAME=/dev/vboxguest
E: SUBSYSTEM=misc
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: DEVLINKS=/dev/char/10:59
DRM Information from dmesg:
- ---------------------------
[ 0.000000] No AGP bridge found
[ 0.620747] Linux agpgart interface v0.103
[ 9.477723] [drm] Initialized drm 1.1.0 20060810
[ 9.518398] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
- -- System Information:
Debian Release: 6.0
APT prefers squeeze-updates
APT policy: (550, 'squeeze-updates'), (550, 'stable'), (540, 'testing'), (530, 'unstable'), (520, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-core depends on:
ii keyboard-configuration 1.68 system-wide keyboard preferences
ii libaudit0 1.7.13-1+b2 Dynamic library for security audit
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
ii libdrm2 2.4.21-1~squeeze3 Userspace interface to kernel DRM
ii libgcrypt11 1.4.6-5 LGPL Crypto library - runtime libr
ii libpciaccess0 0.12.0-1 Generic PCI access library for X
ii libpixman-1-0 0.21.4-2 pixel-manipulation library for X a
ii libselinux1 2.0.96-1 SELinux runtime shared libraries
ii libudev0 164-3 libudev shared library
ii libxau6 1:1.0.6-1 X11 authorisation library
ii libxdmcp6 1:1.0.3-2 X11 Display Manager Control Protoc
ii libxfont1 1:1.4.3-2 X11 font rasterisation library
ii udev 164-3 /dev/ and hotplug management daemo
ii xserver-common 2:1.9.4.901-1 common files used by various X ser
Versions of packages xserver-xorg-core recommends:
ii libgl1-mesa-dri 7.7.1-4 A free implementation of the OpenG
Versions of packages xserver-xorg-core suggests:
ii xfonts-100dpi 1:1.0.1 100 dpi fonts for X
ii xfonts-75dpi 1:1.0.1 75 dpi fonts for X
ii xfonts-scalable 1:1.0.1-1 scalable fonts for X
- -- no debconf information
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iEYEARECAAYFAk13970ACgkQshl/216gEHjwZACgmwAEoISr5Pi8rWxrQ2PxgpDb
8dEAoKwXh82rw9mYmAgVSyG2NxZNaHcP
=+7xS
-----END PGP SIGNATURE-----
Reply to: