Bug#617419: xserver-xorg-video-intel: xrandr doesn't offer all possible resolutions (regression)
Package: xserver-xorg-video-intel
Version: 2:2.14.0-4
Severity: important
Justification: regression / loss of features
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
(Note the bug report is actually based on data from experimental +exp2
version plus everything to satisfy dependencies, bug the bug first
showed up on sid. squeeze works as expected.)
On this notebook with 1024x600 internal screen, attaching the projector
suddenly only shows
+++
Screen 0: minimum 320 x 200, current 1024 x 600, maximum 4096 x 4096
LVDS1 connected 1024x600+0+0 (normal left inverted right x axis y axis) 195mm x 113mm
1024x600 60.0*+
800x600 60.3 56.2
640x480 59.9
VGA1 connected (normal left inverted right x axis y axis)
1024x768 60.0
800x600 60.3 56.2
848x480 60.0
640x480 59.9
+++
whereas earlier versions have offered more possible resolution on VGA1
(same projector, same cable, same laptop), amongst them the (IIRC)
1344x768 which is the native resolution of the projector.
This is particularly annoying because, as you can see, 1024x768 is a
3:4, so watching 9:16 or similar movies is now near impossible without
rescaling the movie both in vlc and in the projector (with noticeable
degradation in quality, and also, I'm just feeling major silliness...)
848x480 may be 9:16 but watching a movie on a large screen with only 480
lines is painful...
This has worked just fine for ages, so losing this is really a pity.
Kernel release does not come into it, but I'm not sure if it was the
upgrade of xserver-xorg-video-intel or if it was some other X related
packges that did it.
thanks for caring about X !
- -- vbi
- -- Package-specific info:
X server symlink status:
- ------------------------
lrwxrwxrwx 1 root root 13 Feb 21 2009 /etc/X11/X -> /usr/bin/Xorg
- -rwxr-xr-x 1 root root 1774660 Feb 25 16:07 /usr/bin/Xorg
VGA-compatible devices on PCI bus:
- ----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03)
Xorg X server configuration file status:
- ----------------------------------------
- -rw-r--r-- 1 root root 145 Dec 30 2009 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
- -------------------------------
Section "Device"
Identifier "Intel 945GME"
Option "AccelMethod" "UXA"
EndSection
Section "ServerFlags"
Option "DontZap" "off"
EndSection
/etc/X11/xorg.conf.d does not exist.
KMS configuration files:
- ------------------------
/etc/modprobe.d/i915-kms.conf:
options i915 modeset=1
Kernel version (/proc/version):
- -------------------------------
Linux version 2.6.38-rc6-686 (Debian 2.6.38~rc6-1~experimental.1) (maks@debian.org) (gcc version 4.4.5 (Debian 4.4.5-11) ) #1 SMP Tue Feb 22 19:38:59 UTC 2011
Xorg X server log files on system:
- ----------------------------------
- -rw-r--r-- 1 root root 19677 Dec 8 09:40 /var/log/Xorg.2.log
- -rw-r--r-- 1 root root 21073 Dec 22 17:41 /var/log/Xorg.1.log
- -rw-r--r-- 1 root root 28359 Mar 8 20:21 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
- ---------------------------------------------------------------------
[ 35.596]
X.Org X Server 1.9.99.903 (1.10.0 RC 3)
Release Date: 2011-2-24
[ 35.661] X Protocol Version 11, Revision 0
[ 35.662] Build Operating System: Linux 2.6.26-2-amd64 i686 Debian
[ 35.662] Current Operating System: Linux laeggerli 2.6.38-rc6-686 #1 SMP Tue Feb 22 19:38:59 UTC 2011 i686
[ 35.662] Kernel command line: BOOT_IMAGE=/latest/boot/vmlinuz-2.6.38-rc6-686 root=UUID=8962d837-ef89-4882-aba2-17680f8789c2 ro rootflags=subvol=latest
[ 35.662] Build Date: 25 February 2011 03:02:40PM
[ 35.662] xorg-server 2:1.9.99.903-1 (Cyril Brulebois <kibi@debian.org>)
[ 35.662] Current version of pixman: 0.21.4
[ 35.662] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 35.663] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 35.663] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 8 20:14:28 2011
[ 35.717] (==) Using config file: "/etc/X11/xorg.conf"
[ 35.717] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 35.735] (==) No Layout section. Using the first Screen section.
[ 35.735] (==) No screen section available. Using defaults.
[ 35.735] (**) |-->Screen "Default Screen Section" (0)
[ 35.735] (**) | |-->Monitor "<default monitor>"
[ 35.737] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 35.737] (**) | |-->Device "Intel 945GME"
[ 35.737] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 35.737] (**) Option "DontZap" "off"
[ 35.738] (==) Automatically adding devices
[ 35.738] (==) Automatically enabling devices
[ 35.933] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 35.934] Entry deleted from font path.
[ 36.025] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 36.026] Entry deleted from font path.
[ 36.062] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 36.062] Entry deleted from font path.
[ 36.092] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 36.092] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 36.092] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 36.092] (II) Loader magic: 0x81f7dc0
[ 36.092] (II) Module ABI versions:
[ 36.092] X.Org ANSI C Emulation: 0.4
[ 36.092] X.Org Video Driver: 10.0
[ 36.092] X.Org XInput driver : 12.2
[ 36.092] X.Org Server Extension : 5.0
[ 36.095] (--) PCI:*(0:0:2:0) 8086:27ae:1025:015b rev 3, Mem @ 0x58480000/524288, 0x40000000/268435456, 0x58500000/262144, I/O @ 0x000060c0/8
[ 36.096] (--) PCI: (0:0:2:1) 8086:27a6:1025:015b rev 3, Mem @ 0x58400000/524288
[ 36.096] (II) Open ACPI successful (/var/run/acpid.socket)
[ 36.096] (II) LoadModule: "extmod"
[ 36.124] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 36.285] (II) Module extmod: vendor="X.Org Foundation"
[ 36.285] compiled for 1.9.99.903, module version = 1.0.0
[ 36.286] Module class: X.Org Server Extension
[ 36.286] ABI class: X.Org Server Extension, version 5.0
[ 36.286] (II) Loading extension SELinux
[ 36.286] (II) Loading extension MIT-SCREEN-SAVER
[ 36.286] (II) Loading extension XFree86-VidModeExtension
[ 36.286] (II) Loading extension XFree86-DGA
[ 36.286] (II) Loading extension DPMS
[ 36.286] (II) Loading extension XVideo
[ 36.286] (II) Loading extension XVideo-MotionCompensation
[ 36.286] (II) Loading extension X-Resource
[ 36.286] (II) LoadModule: "dbe"
[ 36.287] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 36.325] (II) Module dbe: vendor="X.Org Foundation"
[ 36.325] compiled for 1.9.99.903, module version = 1.0.0
[ 36.325] Module class: X.Org Server Extension
[ 36.326] ABI class: X.Org Server Extension, version 5.0
[ 36.326] (II) Loading extension DOUBLE-BUFFER
[ 36.326] (II) LoadModule: "glx"
[ 36.326] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 36.389] (II) Module glx: vendor="X.Org Foundation"
[ 36.390] compiled for 1.9.99.903, module version = 1.0.0
[ 36.390] ABI class: X.Org Server Extension, version 5.0
[ 36.390] (==) AIGLX enabled
[ 36.390] (II) Loading extension GLX
[ 36.390] (II) LoadModule: "record"
[ 36.391] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 36.422] (II) Module record: vendor="X.Org Foundation"
[ 36.423] compiled for 1.9.99.903, module version = 1.13.0
[ 36.423] Module class: X.Org Server Extension
[ 36.423] ABI class: X.Org Server Extension, version 5.0
[ 36.423] (II) Loading extension RECORD
[ 36.423] (II) LoadModule: "dri"
[ 36.424] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 36.493] (II) Module dri: vendor="X.Org Foundation"
[ 36.493] compiled for 1.9.99.903, module version = 1.0.0
[ 36.493] ABI class: X.Org Server Extension, version 5.0
[ 36.493] (II) Loading extension XFree86-DRI
[ 36.494] (II) LoadModule: "dri2"
[ 36.494] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 36.525] (II) Module dri2: vendor="X.Org Foundation"
[ 36.525] compiled for 1.9.99.903, module version = 1.2.0
[ 36.525] ABI class: X.Org Server Extension, version 5.0
[ 36.526] (II) Loading extension DRI2
[ 36.526] (==) Matched intel as autoconfigured driver 0
[ 36.526] (==) Matched vesa as autoconfigured driver 1
[ 36.526] (==) Matched fbdev as autoconfigured driver 2
[ 36.526] (==) Assigned the driver to the xf86ConfigLayout
[ 36.526] (II) LoadModule: "intel"
[ 36.656] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 36.801] (II) Module intel: vendor="X.Org Foundation"
[ 36.801] compiled for 1.9.99.903, module version = 2.14.0
[ 36.801] Module class: X.Org Video Driver
[ 36.802] ABI class: X.Org Video Driver, version 10.0
[ 36.802] (II) LoadModule: "vesa"
[ 36.804] (WW) Warning, couldn't open module vesa
[ 36.804] (II) UnloadModule: "vesa"
[ 36.804] (II) Unloading vesa
[ 36.804] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 36.804] (II) LoadModule: "fbdev"
[ 36.806] (WW) Warning, couldn't open module fbdev
[ 36.806] (II) UnloadModule: "fbdev"
[ 36.806] (II) Unloading fbdev
[ 36.806] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 36.806] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 36.811] (++) using VT number 7
[ 36.827] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 36.828] drmOpenDevice: node name is /dev/dri/card0
[ 36.828] drmOpenDevice: open result is 9, (OK)
[ 36.828] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 36.828] drmOpenDevice: node name is /dev/dri/card0
[ 36.828] drmOpenDevice: open result is 9, (OK)
[ 36.829] drmOpenByBusid: drmOpenMinor returns 9
[ 36.829] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 36.829] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 36.829] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 36.829] (==) intel(0): RGB weight 888
[ 36.829] (==) intel(0): Default visual is TrueColor
[ 36.829] (**) intel(0): Option "AccelMethod" "UXA"
[ 36.830] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 36.830] (--) intel(0): Chipset: "945GME"
[ 36.830] (**) intel(0): Tiling enabled
[ 36.830] (**) intel(0): SwapBuffers wait enabled
[ 36.830] (==) intel(0): video overlay key set to 0x101fe
[ 36.830] (II) intel(0): Output LVDS1 has no monitor section
[ 36.860] (II) intel(0): Output VGA1 has no monitor section
[ 36.860] (II) intel(0): EDID for output LVDS1
[ 36.860] (II) intel(0): Manufacturer: AUO Model: 11c2 Serial#: 0
[ 36.860] (II) intel(0): Year: 2008 Week: 1
[ 36.860] (II) intel(0): EDID Version: 1.3
[ 36.861] (II) intel(0): Digital Display Input
[ 36.861] (II) intel(0): Max Image Size [cm]: horiz.: 20 vert.: 11
[ 36.861] (II) intel(0): Gamma: 2.20
[ 36.861] (II) intel(0): No DPMS capabilities specified
[ 36.861] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 36.861] (II) intel(0): First detailed timing is preferred mode
[ 36.861] (II) intel(0): redX: 0.573 redY: 0.339 greenX: 0.330 greenY: 0.596
[ 36.861] (II) intel(0): blueX: 0.142 blueY: 0.103 whiteX: 0.310 whiteY: 0.330
[ 36.861] (II) intel(0): Manufacturer's mask: 0
[ 36.861] (II) intel(0): Supported detailed timing:
[ 36.862] (II) intel(0): clock: 50.4 MHz Image Size: 195 x 113 mm
[ 36.862] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 36.862] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 604 v_blanking: 625 v_border: 0
[ 36.862] (II) intel(0): Unknown vendor-specific block f
[ 36.862] (II) intel(0): AUO
[ 36.862] (II) intel(0): B089AW01 V1
[ 36.862] (II) intel(0): EDID (in hex):
[ 36.862] (II) intel(0): 00ffffffffffff0006afc21100000000
[ 36.862] (II) intel(0): 0112010380140b780afa569256549824
[ 36.862] (II) intel(0): 1a4f5400000001010101010101010101
[ 36.862] (II) intel(0): 010101010101b0130040415819201888
[ 36.863] (II) intel(0): 3100c371000000180000000f00000000
[ 36.863] (II) intel(0): 00000000000000000020000000fe0041
[ 36.863] (II) intel(0): 554f0a202020202020202020000000fe
[ 36.863] (II) intel(0): 004230383941573031205631200a0058
[ 36.863] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 36.863] (II) intel(0): Printing DDC gathered Modelines:
[ 36.863] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 36.864] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 36.864] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 36.864] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 36.864] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 36.864] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 36.864] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 36.864] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 36.864] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 36.864] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 36.864] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 36.865] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 36.865] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 36.865] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 36.865] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 36.865] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 36.865] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 36.865] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 36.865] (II) intel(0): Printing probed modes for output LVDS1
[ 36.865] (II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 36.866] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 36.866] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 36.866] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 36.896] (II) intel(0): EDID for output VGA1
[ 36.896] (II) intel(0): Output LVDS1 connected
[ 36.896] (II) intel(0): Output VGA1 disconnected
[ 36.896] (II) intel(0): Using exact sizes for initial modes
[ 36.896] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 36.896] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 36.896] (II) intel(0): Kernel page flipping support detected, enabling
[ 36.897] (++) intel(0): DPI set to (133, 133)
[ 36.897] (II) Loading sub module "fb"
[ 36.897] (II) LoadModule: "fb"
[ 36.898] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 36.912] (II) Module fb: vendor="X.Org Foundation"
[ 36.912] compiled for 1.9.99.903, module version = 1.0.0
[ 36.912] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.912] (==) Depth 24 pixmap format is 32 bpp
[ 36.912] (==) intel(0): VideoRam: 262144 KB
[ 36.913] (II) intel(0): [DRI2] Setup complete
[ 36.913] (II) intel(0): [DRI2] DRI driver: i915
[ 36.913] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled
[ 36.913] (II) UXA(0): Driver registered support for the following operations:
[ 36.913] (II) solid
[ 36.913] (II) copy
[ 36.914] (II) composite (RENDER acceleration)
[ 36.914] (II) put_image
[ 36.914] (II) get_image
[ 36.914] (==) intel(0): Backing store disabled
[ 36.914] (==) intel(0): Silken mouse enabled
[ 36.914] (II) intel(0): Initializing HW Cursor
[ 36.936] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 36.936] (==) intel(0): DPMS enabled
[ 36.937] (==) intel(0): Intel XvMC decoder disabled
[ 36.937] (II) intel(0): Set up textured video
[ 36.937] (II) intel(0): Set up overlay video
[ 36.937] (II) intel(0): direct rendering: DRI2 Enabled
[ 36.937] (==) intel(0): hotplug detection: "enabled"
[ 36.938] (--) RandR disabled
[ 36.938] (II) Initializing built-in extension Generic Event Extension
[ 36.938] (II) Initializing built-in extension SHAPE
[ 36.938] (II) Initializing built-in extension MIT-SHM
[ 36.938] (II) Initializing built-in extension XInputExtension
[ 36.938] (II) Initializing built-in extension XTEST
[ 36.938] (II) Initializing built-in extension BIG-REQUESTS
[ 36.939] (II) Initializing built-in extension SYNC
[ 36.939] (II) Initializing built-in extension XKEYBOARD
[ 36.939] (II) Initializing built-in extension XC-MISC
[ 36.939] (II) Initializing built-in extension XINERAMA
[ 36.939] (II) Initializing built-in extension XFIXES
[ 36.939] (II) Initializing built-in extension RENDER
[ 36.940] (II) Initializing built-in extension RANDR
[ 36.940] (II) Initializing built-in extension COMPOSITE
[ 36.940] (II) Initializing built-in extension DAMAGE
[ 36.940] (II) SELinux: Disabled on system
[ 37.440] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 37.440] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 37.441] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 37.441] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 37.441] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 37.442] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
[ 37.442] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 37.443] (II) intel(0): Setting screen physical size to 195 x 114
[ 39.046] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 39.046] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 39.046] (II) LoadModule: "evdev"
[ 39.047] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 39.055] (II) Module evdev: vendor="X.Org Foundation"
[ 39.055] compiled for 1.9.99.902, module version = 2.6.0
[ 39.055] Module class: X.Org XInput Driver
[ 39.055] ABI class: X.Org XInput driver, version 12.2
[ 39.055] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 39.056] (**) Power Button: always reports core events
[ 39.056] (**) Power Button: Device: "/dev/input/event4"
[ 39.068] (--) Power Button: Found keys
[ 39.068] (II) Power Button: Configuring as keyboard
[ 39.068] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 39.069] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 39.069] (**) Option "xkb_rules" "evdev"
[ 39.069] (**) Option "xkb_model" "pc105"
[ 39.069] (**) Option "xkb_layout" "ch"
[ 39.070] (**) Option "xkb_options" "lv3:ralt_switch"
[ 39.165] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 39.165] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 39.165] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 39.165] (**) Video Bus: always reports core events
[ 39.165] (**) Video Bus: Device: "/dev/input/event5"
[ 39.176] (--) Video Bus: Found keys
[ 39.176] (II) Video Bus: Configuring as keyboard
[ 39.176] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[ 39.176] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 39.177] (**) Option "xkb_rules" "evdev"
[ 39.177] (**) Option "xkb_model" "pc105"
[ 39.177] (**) Option "xkb_layout" "ch"
[ 39.178] (**) Option "xkb_options" "lv3:ralt_switch"
[ 39.199] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 39.199] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 39.199] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 39.199] (**) Power Button: always reports core events
[ 39.199] (**) Power Button: Device: "/dev/input/event1"
[ 39.204] (--) Power Button: Found keys
[ 39.204] (II) Power Button: Configuring as keyboard
[ 39.204] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 39.205] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 39.205] (**) Option "xkb_rules" "evdev"
[ 39.205] (**) Option "xkb_model" "pc105"
[ 39.205] (**) Option "xkb_layout" "ch"
[ 39.206] (**) Option "xkb_options" "lv3:ralt_switch"
[ 39.209] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 39.209] (II) No input driver/identifier specified (ignoring)
[ 39.211] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 39.211] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 39.211] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 39.212] (**) Sleep Button: always reports core events
[ 39.212] (**) Sleep Button: Device: "/dev/input/event3"
[ 39.212] (--) Sleep Button: Found keys
[ 39.212] (II) Sleep Button: Configuring as keyboard
[ 39.213] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 39.213] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 39.213] (**) Option "xkb_rules" "evdev"
[ 39.213] (**) Option "xkb_model" "pc105"
[ 39.214] (**) Option "xkb_layout" "ch"
[ 39.214] (**) Option "xkb_options" "lv3:ralt_switch"
[ 39.223] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 39.223] (II) No input driver/identifier specified (ignoring)
[ 39.225] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 39.225] (II) No input driver/identifier specified (ignoring)
[ 39.233] (II) config/udev: Adding input device Acer Crystal Eye webcam (/dev/input/event7)
[ 39.233] (**) Acer Crystal Eye webcam: Applying InputClass "evdev keyboard catchall"
[ 39.233] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 39.233] (**) Acer Crystal Eye webcam: always reports core events
[ 39.233] (**) Acer Crystal Eye webcam: Device: "/dev/input/event7"
[ 39.234] (--) Acer Crystal Eye webcam: Found keys
[ 39.234] (II) Acer Crystal Eye webcam: Configuring as keyboard
[ 39.234] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7/event7"
[ 39.234] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam" (type: KEYBOARD)
[ 39.234] (**) Option "xkb_rules" "evdev"
[ 39.234] (**) Option "xkb_model" "pc105"
[ 39.234] (**) Option "xkb_layout" "ch"
[ 39.235] (**) Option "xkb_options" "lv3:ralt_switch"
[ 39.242] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 39.242] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 39.242] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 39.242] (**) AT Translated Set 2 keyboard: always reports core events
[ 39.243] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 39.243] (--) AT Translated Set 2 keyboard: Found keys
[ 39.243] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 39.243] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 39.243] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 39.243] (**) Option "xkb_rules" "evdev"
[ 39.243] (**) Option "xkb_model" "pc105"
[ 39.243] (**) Option "xkb_layout" "ch"
[ 39.244] (**) Option "xkb_options" "lv3:ralt_switch"
[ 39.246] (II) config/udev: Adding input device PS/2 Synaptics TouchPad (/dev/input/event10)
[ 39.247] (**) PS/2 Synaptics TouchPad: Applying InputClass "evdev pointer catchall"
[ 39.247] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 39.247] (**) PS/2 Synaptics TouchPad: always reports core events
[ 39.247] (**) PS/2 Synaptics TouchPad: Device: "/dev/input/event10"
[ 39.247] (--) PS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 39.247] (--) PS/2 Synaptics TouchPad: Found relative axes
[ 39.248] (--) PS/2 Synaptics TouchPad: Found x and y relative axes
[ 39.248] (II) PS/2 Synaptics TouchPad: Configuring as mouse
[ 39.248] (**) PS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 39.248] (**) PS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 39.248] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event10"
[ 39.248] (II) XINPUT: Adding extended input device "PS/2 Synaptics TouchPad" (type: MOUSE)
[ 39.249] (II) PS/2 Synaptics TouchPad: initialized for relative axes.
[ 39.249] (**) PS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 39.249] (**) PS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 39.249] (**) PS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 39.249] (**) PS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 39.250] (II) config/udev: Adding input device PS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 39.250] (II) No input driver/identifier specified (ignoring)
[ 39.251] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 39.251] (II) No input driver/identifier specified (ignoring)
[ 39.257] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event11)
[ 39.257] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 39.257] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 39.258] (**) ACPI Virtual Keyboard Device: always reports core events
[ 39.258] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event11"
[ 39.258] (--) ACPI Virtual Keyboard Device: Found keys
[ 39.258] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 39.258] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event11"
[ 39.258] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
[ 39.258] (**) Option "xkb_rules" "evdev"
[ 39.259] (**) Option "xkb_model" "pc105"
[ 39.259] (**) Option "xkb_layout" "ch"
[ 39.259] (**) Option "xkb_options" "lv3:ralt_switch"
[ 81.969] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 81.969] (II) intel(0): Printing DDC gathered Modelines:
[ 81.969] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 117.556] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 117.557] (II) intel(0): Printing DDC gathered Modelines:
[ 117.557] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 143.797] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 143.798] (II) intel(0): Printing DDC gathered Modelines:
[ 143.798] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 143.820] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 143.821] (II) intel(0): Printing DDC gathered Modelines:
[ 143.821] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 143.853] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 143.853] (II) intel(0): Printing DDC gathered Modelines:
[ 143.853] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 144.422] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 144.422] (II) intel(0): Printing DDC gathered Modelines:
[ 144.422] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 234.753] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 234.753] (II) intel(0): Printing DDC gathered Modelines:
[ 234.753] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 234.793] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 234.794] (II) intel(0): Printing DDC gathered Modelines:
[ 234.794] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 234.836] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 234.836] (II) intel(0): Printing DDC gathered Modelines:
[ 234.836] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 235.282] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 235.282] (II) intel(0): Printing DDC gathered Modelines:
[ 235.282] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 403.958] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 403.958] (II) intel(0): Printing DDC gathered Modelines:
[ 403.958] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 478.725] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 478.725] (II) intel(0): Printing DDC gathered Modelines:
[ 478.725] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 478.746] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 478.746] (II) intel(0): Printing DDC gathered Modelines:
[ 478.746] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 478.775] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 478.776] (II) intel(0): Printing DDC gathered Modelines:
[ 478.776] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 479.208] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 479.208] (II) intel(0): Printing DDC gathered Modelines:
[ 479.208] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184 1344 600 603 604 625 -hsync -vsync (37.5 kHz)
udev information:
- -----------------
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=ch
E: DEVLINKS=/dev/char/13:68
E: XKBOPTIONS=lv3:ralt_switch
E: DMI_VENDOR=Acer
P: /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5
N: input/event5
S: char/13:69
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=ch
E: DEVLINKS=/dev/char/13:69
E: XKBOPTIONS=lv3:ralt_switch
E: DMI_VENDOR=Acer
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1
N: input/event1
S: char/13:65
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=ch
E: DEVLINKS=/dev/char/13:65
E: XKBOPTIONS=lv3:ralt_switch
E: DMI_VENDOR=Acer
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=Acer
E: DEVLINKS=/dev/char/13:66
P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=ch
E: DEVLINKS=/dev/char/13:67
E: XKBOPTIONS=lv3:ralt_switch
E: DMI_VENDOR=Acer
P: /devices/pci0000:00/0000:00:1b.0/input/input8/event8
N: input/event8
S: char/13:72
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Acer
E: DEVLINKS=/dev/char/13:72
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event9
N: input/event9
S: char/13:73
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Acer
E: DEVLINKS=/dev/char/13:73
E: TAGS=:udev-acl:
P: /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7/event7
N: input/event7
S: char/13:71
S: input/by-id/usb-SuYin_Acer_Crystal_Eye_webcam_CN0316-M608-OV01-VA-R02.00.00-event-if00
S: input/by-path/pci-0000:00:1d.7-usb-0:5:1.0-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=SuYin
E: ID_VENDOR_ENC=SuYin
E: ID_VENDOR_ID=064e
E: ID_MODEL=Acer_Crystal_Eye_webcam
E: ID_MODEL_ENC=Acer\x20Crystal\x20Eye\x20webcam
E: ID_MODEL_ID=d101
E: ID_REVISION=0001
E: ID_SERIAL=SuYin_Acer_Crystal_Eye_webcam_CN0316-M608-OV01-VA-R02.00.00
E: ID_SERIAL_SHORT=CN0316-M608-OV01-VA-R02.00.00
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1d.7-usb-0:5:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=ch
E: DEVLINKS=/dev/char/13:71 /dev/input/by-id/usb-SuYin_Acer_Crystal_Eye_webcam_CN0316-M608-OV01-VA-R02.00.00-event-if00 /dev/input/by-path/pci-0000:00:1d.7-usb-0:5:1.0-event
E: XKBOPTIONS=lv3:ralt_switch
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=ch
E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=lv3:ralt_switch
E: DMI_VENDOR=Acer
P: /devices/platform/i8042/serio2/input/input10/event10
N: input/event10
S: char/13:74
S: input/by-path/platform-i8042-serio-2-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio2/input/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-2
E: DMI_VENDOR=Acer
E: DEVLINKS=/dev/char/13:74 /dev/input/by-path/platform-i8042-serio-2-event-mouse
P: /devices/platform/i8042/serio2/input/input10/mouse0
N: input/mouse0
S: char/13:32
S: input/by-path/platform-i8042-serio-2-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio2/input/input10/mouse0
E: MAJOR=13
E: MINOR=32
E: DEVNAME=/dev/input/mouse0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-2
E: DEVLINKS=/dev/char/13:32 /dev/input/by-path/platform-i8042-serio-2-mouse
P: /devices/platform/pcspkr/input/input6/event6
N: input/event6
S: char/13:70
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=Acer
E: DEVLINKS=/dev/char/13:70 /dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/virtual/input/input11/event11
N: input/event11
S: char/13:75
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input11/event11
E: MAJOR=13
E: MINOR=75
E: DEVNAME=/dev/input/event11
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=ch
E: DEVLINKS=/dev/char/13:75
E: XKBOPTIONS=lv3:ralt_switch
E: DMI_VENDOR=Acer
DRM Information from dmesg:
- ---------------------------
[ 1.259207] Linux agpgart interface v0.103
[ 1.259479] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.259822] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.260157] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.260438] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[ 2.006735] [drm] Initialized drm 1.1.0 20060810
[ 2.274644] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.276068] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.276152] [drm] Driver supports precise vblank timestamp query.
[ 2.333960] [drm] initialized overlay support
[ 2.642172] fb0: inteldrmfb frame buffer device
[ 2.642259] drm: registered panic notifier
[ 2.642589] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- -- System Information:
Debian Release: 6.0
APT prefers stable
APT policy: (800, 'stable'), (700, 'testing'), (600, 'unstable'), (500, 'squeeze-updates'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.38-rc6-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
ii libdrm-intel1 2.4.24-1 Userspace interface to intel-speci
ii libdrm2 2.4.24-1 Userspace interface to kernel DRM
ii libpciaccess0 0.12.0-1 Generic PCI access library for X
ii libudev0 164-3 libudev shared library
ii libx11-6 2:1.3.3-4 X11 client-side library
ii libx11-xcb1 2:1.3.3-4 Xlib/XCB interface library
ii libxcb-aux0 0.3.6-1 utility libraries for X C Binding
ii libxcb-dri2-0 1.6-1 X C Binding, dri2 extension
ii libxcb1 1.6-1 X C Binding
ii libxext6 2:1.1.2-1 X11 miscellaneous extension librar
ii libxfixes3 1:4.0.5-1 X11 miscellaneous 'fixes' extensio
ii libxv1 2:1.0.5-1 X11 Video extension library
ii libxvmc1 2:1.0.5-1 X11 Video extension library
ii xserver-xorg-core [xorg-v 2:1.9.99.903-1 Xorg X server - core server
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
- -- no debconf information
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iEYEARECAAYFAk12hbIACgkQKqpm2L3fmXrWcACgluGhIQiAzdFFCZXUYZ/OQYYe
VyAAoLoUFxKqT4FJQ5Nzf8jGp8cIKokO
=HP4J
-----END PGP SIGNATURE-----
Reply to: