Your message dated Sun, 27 Feb 2011 01:15:55 +0100 with message-id <20110227001555.GA17947@debian.org> and subject line Re: Bug#569776: lenny's version work has caused the Debian Bug report #569776, regarding xserver-xorg: X hangs on an Omnibook XE2 with the Silicon Motion, Inc. SM810 LynxE (rev a6) chipset to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 569776: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=569776 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg: X hangs on an Omnibook XE2 with the Silicon Motion, Inc. SM810 LynxE (rev a6) chipset
- From: dysmann <dysinscr@gmail.com>
- Date: Sun, 14 Feb 2010 11:08:52 +0100
- Message-id: <20100214100852.2261.23281.reportbug@debian>
Package: xserver-xorg Version: 1:7.5+3 Severity: important Hello, I can't use Xorg anymore on my HP Omnibook XE2. I used to use vesa which worked, but now, when I type "startx", X hangs and eats 100% CPU. I need to kill it with killall Xorg -s SIGKILL via ssh. The computer does not respond but via ssh. Looking to the last line of /var/log/Xorg.0.log, you can see : (II) VESA(0): VESA VBE OEM: S� This is likely to be the moment of the freeze. When I use the siliconmotion driver, there is no freeze but it doesn"t worg neither. I have the same issue on Arch Linux. My Xorg.0.log when using siliconmotion driver : X.Org X Server 1.7.4 Release Date: 2010-01-08 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32-trunk-686 i686 Debian Current Operating System: Linux debian 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=f88bb137-564e-448a-b92b-7d9fc432443f ro quiet Build Date: 20 January 2010 10:52:55PM xorg-server 2:1.7.4-2 (bgoglin@debian.org) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 14 10:21:46 2010 (II) Loader magic: 0x81e7680 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (--) using VT number 7 (--) PCI:*(0:0:2:0) 126f:0810:126f:0810 Silicon Motion, Inc. SM810 LynxE rev 166, Mem @ 0xfd000000/16777216 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default siliconmotion Device 0" Driver "siliconmotion" EndSection Section "Screen" Identifier "Builtin Default siliconmotion Screen 0" Device "Builtin Default siliconmotion Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default siliconmotion Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default fbdev Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default siliconmotion Screen 0" (0) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default siliconmotion Device 0" (==) No monitor specified for screen "Builtin Default siliconmotion Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (1) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (2) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "siliconmotion" (II) Loading /usr/lib/xorg/modules/drivers/siliconmotion_drv.so (II) Module siliconmotion: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.7.3 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.4, module version = 2.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 0.4.1 ABI class: X.Org Video Driver, version 6.0 (II) SMI: driver (version 1.7.3) for Silicon Motion Lynx chipsets: Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM, Cougar3DR, MSOC (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 00@00:02:0 (WW) Falling back to old probe method for siliconmotion (--) Assigning device section with no busID to primary device (--) Chipset LynxE found (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.7.4, module version = 0.0.2 ABI class: X.Org Video Driver, version 6.0 (EE) open /dev/fb0: No such file or directory (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.4, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) SMI(0): Creating default Display subsection in Screen section "Builtin Default siliconmotion Screen 0" for depth/fbbpp 24/32 (==) SMI(0): Depth 24, (--) framebuffer bpp 32 (==) SMI(0): RGB weight 888 (==) SMI(0): Default visual is TrueColor (==) SMI(0): PCI Burst enabled (==) SMI(0): PCI Retry enabled (==) SMI(0): Using Hardware Cursor (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Video Driver, version 6.0 (II) SMI(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) SMI(0): VESA BIOS detected (II) SMI(0): VESA VBE Version 0.0 (II) SMI(0): VESA VBE Total Mem: 1664 kB (II) SMI(0): VESA VBE OEM: S� (--) SMI(0): Chipset: "LynxE" (==) SMI(0): Dual head disabled (==) SMI(0): Using XAA acceleration architecture (--) SMI(0): videoram: 2048kB (II) SMI(0): Cursor Offset: 001FFC00 (II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) SMI(0): Reserved: 001AF800 (II) SMI(0): DSTN Panel Size = 800x600 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) SMI(0): I2C bus "I2C bus" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (==) SMI(0): Using gamma correction (1.0, 1.0, 1.0) (II) SMI(0): MCLK = 54.409 (II) SMI(0): Output LVDS has no monitor section (II) SMI(0): Not using default mode "640x350" (vrefresh out of range) (II) SMI(0): Not using default mode "320x175" (doublescan mode not supported) (II) SMI(0): Not using default mode "640x400" (vrefresh out of range) (II) SMI(0): Not using default mode "320x200" (doublescan mode not supported) (II) SMI(0): Not using default mode "720x400" (vrefresh out of range) (II) SMI(0): Not using default mode "360x200" (doublescan mode not supported) (II) SMI(0): Not using default mode "640x480" (exceeds panel dimensions) (II) SMI(0): Not using default mode "320x240" (doublescan mode not supported) (II) SMI(0): Not using default mode "640x480" (vrefresh out of range) (II) SMI(0): Not using default mode "320x240" (doublescan mode not supported) (II) SMI(0): Not using default mode "640x480" (vrefresh out of range) (II) SMI(0): Not using default mode "320x240" (doublescan mode not supported) (II) SMI(0): Not using default mode "640x480" (vrefresh out of range) (II) SMI(0): Not using default mode "320x240" (doublescan mode not supported) (II) SMI(0): Not using default mode "800x600" (vrefresh out of range) (II) SMI(0): Not using default mode "400x300" (doublescan mode not supported) (II) SMI(0): Not using default mode "800x600" (hsync out of range) (II) SMI(0): Not using default mode "400x300" (doublescan mode not supported) (II) SMI(0): Not using default mode "800x600" (vrefresh out of range) (II) SMI(0): Not using default mode "400x300" (doublescan mode not supported) (II) SMI(0): Not using default mode "800x600" (vrefresh out of range) (II) SMI(0): Not using default mode "400x300" (doublescan mode not supported) (II) SMI(0): Not using default mode "800x600" (vrefresh out of range) (II) SMI(0): Not using default mode "400x300" (doublescan mode not supported) (II) SMI(0): Not using default mode "1024x768" (interlace mode not supported) (II) SMI(0): Not using default mode "512x384" (doublescan mode not supported) (II) SMI(0): Not using default mode "1024x768" (hsync out of range) (II) SMI(0): Not using default mode "512x384" (doublescan mode not supported) (II) SMI(0): Not using default mode "1024x768" (vrefresh out of range) (II) SMI(0): Not using default mode "512x384" (doublescan mode not supported) (II) SMI(0): Not using default mode "1024x768" (vrefresh out of range) (II) SMI(0): Not using default mode "512x384" (doublescan mode not supported) (II) SMI(0): Not using default mode "1024x768" (vrefresh out of range) (II) SMI(0): Not using default mode "512x384" (doublescan mode not supported) (II) SMI(0): Not using default mode "1152x864" (vrefresh out of range) (II) SMI(0): Not using default mode "576x432" (doublescan mode not supported) (II) SMI(0): Not using default mode "1280x960" (hsync out of range) (II) SMI(0): Not using default mode "640x480" (doublescan mode not supported) (II) SMI(0): Not using default mode "1280x960" (vrefresh out of range) (II) SMI(0): Not using default mode "640x480" (doublescan mode not supported) (II) SMI(0): Not using default mode "1280x1024" (hsync out of range) (II) SMI(0): Not using default mode "640x512" (doublescan mode not supported) (II) SMI(0): Not using default mode "1280x1024" (vrefresh out of range) (II) SMI(0): Not using default mode "640x512" (doublescan mode not supported) (II) SMI(0): Not using default mode "1280x1024" (vrefresh out of range) (II) SMI(0): Not using default mode "640x512" (doublescan mode not supported) (II) SMI(0): Not using default mode "1600x1200" (hsync out of range) (II) SMI(0): Not using default mode "800x600" (doublescan mode not supported) (II) SMI(0): Not using default mode "1600x1200" (vrefresh out of range) (II) SMI(0): Not using default mode "800x600" (doublescan mode not supported) (II) SMI(0): Not using default mode "1600x1200" (vrefresh out of range) (II) SMI(0): Not using default mode "800x600" (doublescan mode not supported) (II) SMI(0): Not using default mode "1600x1200" (vrefresh out of range) (II) SMI(0): Not using default mode "800x600" (doublescan mode not supported) (II) SMI(0): Not using default mode "1600x1200" (vrefresh out of range) (II) SMI(0): Not using default mode "800x600" (doublescan mode not supported) (II) SMI(0): Not using default mode "1792x1344" (hsync out of range) (II) SMI(0): Not using default mode "896x672" (doublescan mode not supported) (II) SMI(0): Not using default mode "1792x1344" (vrefresh out of range) (II) SMI(0): Not using default mode "896x672" (doublescan mode not supported) (II) SMI(0): Not using default mode "1856x1392" (hsync out of range) (II) SMI(0): Not using default mode "928x696" (doublescan mode not supported) (II) SMI(0): Not using default mode "1856x1392" (vrefresh out of range) (II) SMI(0): Not using default mode "928x696" (doublescan mode not supported) (II) SMI(0): Not using default mode "1920x1440" (hsync out of range) (II) SMI(0): Not using default mode "960x720" (doublescan mode not supported) (II) SMI(0): Not using default mode "1920x1440" (vrefresh out of range) (II) SMI(0): Not using default mode "960x720" (doublescan mode not supported) (II) SMI(0): Not using default mode "832x624" (vrefresh out of range) (II) SMI(0): Not using default mode "416x312" (doublescan mode not supported) (II) SMI(0): Not using default mode "1152x864" (hsync out of range) (II) SMI(0): Not using default mode "576x432" (doublescan mode not supported) (II) SMI(0): Not using default mode "1152x864" (vrefresh out of range) (II) SMI(0): Not using default mode "576x432" (doublescan mode not supported) (II) SMI(0): Not using default mode "1152x864" (vrefresh out of range) (II) SMI(0): Not using default mode "576x432" (doublescan mode not supported) (II) SMI(0): Not using default mode "1152x864" (vrefresh out of range) (II) SMI(0): Not using default mode "576x432" (doublescan mode not supported) (II) SMI(0): Not using default mode "1152x864" (vrefresh out of range) (II) SMI(0): Not using default mode "576x432" (doublescan mode not supported) (II) SMI(0): Not using default mode "1152x864" (vrefresh out of range) (II) SMI(0): Not using default mode "576x432" (doublescan mode not supported) (II) SMI(0): Not using default mode "1360x768" (hsync out of range) (II) SMI(0): Not using default mode "680x384" (doublescan mode not supported) (II) SMI(0): Not using default mode "1360x768" (hsync out of range) (II) SMI(0): Not using default mode "680x384" (doublescan mode not supported) (II) SMI(0): Not using default mode "1400x1050" (hsync out of range) (II) SMI(0): Not using default mode "700x525" (doublescan mode not supported) (II) SMI(0): Not using default mode "1400x1050" (vrefresh out of range) (II) SMI(0): Not using default mode "700x525" (doublescan mode not supported) (II) SMI(0): Not using default mode "1400x1050" (vrefresh out of range) (II) SMI(0): Not using default mode "700x525" (doublescan mode not supported) (II) SMI(0): Not using default mode "1400x1050" (vrefresh out of range) (II) SMI(0): Not using default mode "700x525" (doublescan mode not supported) (II) SMI(0): Not using default mode "1440x900" (hsync out of range) (II) SMI(0): Not using default mode "720x450" (doublescan mode not supported) (II) SMI(0): Not using default mode "1600x1024" (hsync out of range) (II) SMI(0): Not using default mode "800x512" (doublescan mode not supported) (II) SMI(0): Not using default mode "1680x1050" (hsync out of range) (II) SMI(0): Not using default mode "840x525" (doublescan mode not supported) (II) SMI(0): Not using default mode "1680x1050" (hsync out of range) (II) SMI(0): Not using default mode "840x525" (doublescan mode not supported) (II) SMI(0): Not using default mode "1680x1050" (vrefresh out of range) (II) SMI(0): Not using default mode "840x525" (doublescan mode not supported) (II) SMI(0): Not using default mode "1680x1050" (vrefresh out of range) (II) SMI(0): Not using default mode "840x525" (doublescan mode not supported) (II) SMI(0): Not using default mode "1680x1050" (vrefresh out of range) (II) SMI(0): Not using default mode "840x525" (doublescan mode not supported) (II) SMI(0): Not using default mode "1920x1080" (hsync out of range) (II) SMI(0): Not using default mode "960x540" (doublescan mode not supported) (II) SMI(0): Not using default mode "1920x1200" (hsync out of range) (II) SMI(0): Not using default mode "960x600" (doublescan mode not supported) (II) SMI(0): Not using default mode "1920x1440" (vrefresh out of range) (II) SMI(0): Not using default mode "960x720" (doublescan mode not supported) (II) SMI(0): Not using default mode "2048x1536" (hsync out of range) (II) SMI(0): Not using default mode "1024x768" (doublescan mode not supported) (II) SMI(0): Not using default mode "2048x1536" (vrefresh out of range) (II) SMI(0): Not using default mode "1024x768" (doublescan mode not supported) (II) SMI(0): Not using default mode "2048x1536" (vrefresh out of range) (II) SMI(0): Not using default mode "1024x768" (doublescan mode not supported) (II) SMI(0): Printing probed modes for output LVDS (II) SMI(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) (II) SMI(0): Output LVDS connected (II) SMI(0): Using fuzzy aspect match for initial modes (II) SMI(0): Output LVDS using initial mode 800x600 (II) SMI(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (EE) SMI(0): Not enough video memory for the configured screen size (800x800) and color depth. (II) UnloadModule: "siliconmotion" (II) UnloadModule: "vbe" (II) Unloading /usr/lib/xorg/modules/libvbe.so (II) UnloadModule: "int10" (II) Unloading /usr/lib/xorg/modules/libint10.so (II) UnloadModule: "vgahw" (II) Unloading /usr/lib/xorg/modules/libvgahw.so (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 Feb 14 10:19 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1710344 Jan 21 00:01 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Silicon Motion, Inc. SM810 LynxE (rev a6) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 2855 Feb 14 10:27 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf when using VESA : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dbe" Load "extmod" Load "dri2" Load "record" Load "dri" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "pci_burst" # [<bool>] #Option "pci_retry" # [<bool>] #Option "NoAccel" # [<bool>] #Option "MCLK" # <freq> #Option "MXCLK" # <freq> #Option "HWCursor" # [<bool>] #Option "SWCursor" # [<bool>] #Option "VideoKey" # <i> #Option "ByteSwap" # [<bool>] #Option "Interlaced" # [<bool>] #Option "UseBIOS" # [<bool>] #Option "Dualhead" # [<bool>] #Option "AccelMethod" # <str> #Option "PanelSize" # [<str>] #Option "UseFBDev" # [<bool>] #Option "CSCVideo" # [<bool>] Identifier "Card0" Driver "vesa" VendorName "Silicon Motion, Inc." BoardName "SM810 LynxE" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 6641 Feb 14 10:28 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log when using VESA: X.Org X Server 1.7.4 Release Date: 2010-01-08 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32-trunk-686 i686 Debian Current Operating System: Linux debian 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=f88bb137-564e-448a-b92b-7d9fc432443f ro quiet Build Date: 20 January 2010 10:52:55PM xorg-server 2:1.7.4-2 (bgoglin@debian.org) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 14 10:28:17 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/X11/misc, built-ins, /usr/share/fonts/X11/misc, built-ins (**) ModulePath set to "/usr/lib/xorg/modules" (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Mouse0 (WW) Disabling Keyboard0 (II) Loader magic: 0x81e7680 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (--) using VT number 7 (--) PCI:*(0:0:2:0) 126f:0810:126f:0810 Silicon Motion, Inc. SM810 LynxE rev 166, Mem @ 0xfd000000/16777216 (II) Open ACPI successful (/var/run/acpid.socket) (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.4, module version = 2.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) VESA: driver for VESA chipsets: vesa (II) Primary Device is: PCI 00@00:02:0 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.7.4, module version = 1.0.0 ABI class: X.Org Video Driver, version 6.0 (II) VESA(0): initializing int10 (II) VESA(0): Primary V_BIOS segment is: 0xc000 (II) VESA(0): VESA BIOS detected (II) VESA(0): VESA VBE Version 0.0 (II) VESA(0): VESA VBE Total Mem: 1664 kB (II) VESA(0): VESA VBE OEM: S� udev information: P: /devices/platform/i8042/serio0/input/input0/event0 N: input/event0 S: char/13:64 S: input/by-path/platform-i8042-serio-0-event-kbd E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0 E: MAJOR=13 E: MINOR=64 E: DEVNAME=/dev/input/event0 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-0 E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd E: XKBLAYOUT=fr E: x11_driver=evdev P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 N: input/event1 S: char/13:65 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 E: MAJOR=13 E: MINOR=65 E: DEVNAME=/dev/input/event1 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: DEVLINKS=/dev/char/13:65 E: XKBLAYOUT=fr E: x11_driver=evdev P: /devices/platform/pcspkr/input/input2/event2 N: input/event2 S: char/13:66 S: input/by-path/platform-pcspkr-event-spkr E: UDEV_LOG=3 E: DEVPATH=/devices/platform/pcspkr/input/input2/event2 E: MAJOR=13 E: MINOR=66 E: DEVNAME=/dev/input/event2 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_SERIAL=noserial E: ID_PATH=platform-pcspkr E: DEVLINKS=/dev/char/13:66 /dev/input/by-path/platform-pcspkr-event-spkr P: /devices/platform/i8042/serio1/input/input3/event3 N: input/event3 S: char/13:67 S: input/by-path/platform-i8042-serio-1-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio1/input/input3/event3 E: MAJOR=13 E: MINOR=67 E: DEVNAME=/dev/input/event3 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-1 E: x11_driver=synaptics E: DEVLINKS=/dev/char/13:67 /dev/input/by-path/platform-i8042-serio-1-event-mouse DRM Information from dmesg: [ 79.382499] [<c10f1eb9>] ? sysfs_addrm_finish+0x13/0x199 -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.32-trunk-686 (SMP w/1 CPU core) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg depends on: ii libc6 2.10.2-2 GNU C Library: Shared libraries ii x11-xkb-utils 7.5+1 X11 XKB utilities ii xkb-data 1.7-2 X Keyboard Extension (XKB) configu ii xserver-xorg-core 2:1.7.4-2 Xorg X server - core server ii xserver-xorg-input-al 1:7.5+3 the X.Org X server -- input driver ii xserver-xorg-input-ev 1:2.3.2-3 X.Org X server -- evdev input driv ii xserver-xorg-input-sy 1.2.1-1 Synaptics TouchPad driver for X.Or ii xserver-xorg-input-wa 0.10.3+20100109-1 X.Org X server -- Wacom input driv ii xserver-xorg-video-al 1:7.5+3 the X.Org X server -- output drive ii xserver-xorg-video-ap 1:1.2.2-1 X.Org X server -- APM display driv ii xserver-xorg-video-ar 1:0.7.2-1 X.Org X server -- ark display driv ii xserver-xorg-video-at 1:6.12.4-3 X.Org X server -- ATI display driv ii xserver-xorg-video-ch 1:1.2.2-1 X.Org X server -- Chips display dr ii xserver-xorg-video-ci 1:1.3.2-1 X.Org X server -- Cirrus display d ii xserver-xorg-video-fb 1:0.4.1-1 X.Org X server -- fbdev display dr ii xserver-xorg-video-i1 1:1.3.3-1 X.Org X server -- i128 display dri ii xserver-xorg-video-i7 1:1.3.2-1 X.Org X server -- i740 display dri ii xserver-xorg-video-in 2:2.9.1-2 X.Org X server -- Intel i8xx, i9xx ii xserver-xorg-video-ma 6.8.2-2 X.Org X server -- ATI Mach64 displ ii xserver-xorg-video-mg 1:1.4.11.dfsg-2 X.Org X server -- MGA display driv ii xserver-xorg-video-ne 1:1.2.4-2 X.Org X server -- Neomagic display ii xserver-xorg-video-nv 1:2.1.15-1 X.Org X server -- NV display drive ii xserver-xorg-video-op 1:0.2.904+svn827-1 X.Org X server -- VIA display driv ii xserver-xorg-video-r1 6.8.1-2 X.Org X server -- ATI r128 display ii xserver-xorg-video-ra 1:6.12.4-3 X.Org X server -- ATI Radeon displ ii xserver-xorg-video-ra 1.3.0-2 X.Org X server -- AMD/ATI r5xx, r6 ii xserver-xorg-video-re 1:4.2.3-1 X.Org X server -- Rendition displa ii xserver-xorg-video-s3 1:0.6.3-1 X.Org X server -- legacy S3 displa ii xserver-xorg-video-s3 1:1.10.4-1 X.Org X server -- S3 ViRGE display ii xserver-xorg-video-sa 1:2.3.1-1 X.Org X server -- Savage display d ii xserver-xorg-video-si 1:1.7.3-1 X.Org X server -- SiliconMotion di ii xserver-xorg-video-si 1:0.10.2-1 X.Org X server -- SiS display driv ii xserver-xorg-video-si 1:0.9.3-1 X.Org X server -- SiS USB display ii xserver-xorg-video-td 1:1.4.3-1 X.Org X server -- tdfx display dri ii xserver-xorg-video-tr 1:1.3.3-1 X.Org X server -- Trident display ii xserver-xorg-video-ts 1:1.2.3-1 X.Org X server -- Tseng display dr ii xserver-xorg-video-v4 1:0.2.0-4 X.Org X server -- Video 4 Linux di ii xserver-xorg-video-ve 1:2.3.0-1 X.Org X server -- VESA display dri ii xserver-xorg-video-vm 1:10.16.9-1 X.Org X server -- VMware display d ii xserver-xorg-video-vo 1:1.2.3-1 X.Org X server -- Voodoo display d Versions of packages xserver-xorg recommends: ii libgl1-mesa-dri 7.6.1-1 A free implementation of the OpenG xserver-xorg suggests no packages. -- no debconf information
--- End Message ---
--- Begin Message ---
- To: dysmann <dysinscr@gmail.com>, 569776-done@bugs.debian.org
- Subject: Re: Bug#569776: lenny's version work
- From: Cyril Brulebois <kibi@debian.org>
- Date: Sun, 27 Feb 2011 01:15:55 +0100
- Message-id: <20110227001555.GA17947@debian.org>
- In-reply-to: <20100303204523.GA13760@debian.org>
- References: <4B7C0FF0.5090000@gmail.com> <20100303204523.GA13760@debian.org>
Hi again, Cyril Brulebois <kibi@debian.org> (03/03/2010): > I note you're using an “old” kernel version, so if you'd like to > give a try to recent Xorg & kernel, you can find some clues in the > second part of [1]. According to [2], we should have other kernel > versions to test in a not-too-far future. Posting the whole output > of “dmesg” may help determine whether the kernel backtrace is > relevant. nearly a year later, no replies. I'm closing this bug report accordingly. Feel free to open a new one following this doc if you can reproduce your issue with a squeeze (or higher) system: http://pkg-xorg.alioth.debian.org/howto/report-bugs.html KiBi.Attachment: signature.asc
Description: Digital signature
--- End Message ---