Your message dated Thu, 10 Feb 2011 16:12:30 +0100 with message-id <20110210151230.GA30398@debian.org> and subject line Re: Bug#550134: blender has many display artifacts with Matrox card has caused the Debian Bug report #550134, regarding blender has many display artifacts with Matrox card to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 550134: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=550134 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: blender has many display artifacts with Matrox card
- From: jdietrch@fastmail.fm
- Date: Wed, 07 Oct 2009 15:12:38 -0400
- Message-id: <1254942758.6037.1338669155@webmail.messagingengine.com>
Package: libgl1-mesa-dri Version: 7.5.1-1 Severity: important Hi, I have a Matrox Millennium G400 card. I am experiencing serious display problems with some 3d applications. For example, when I start blender, there are a number of artifacts/triangles/etc in various places, especially the menus. I've attached a screenshot to this report. Stellarium is another program I've found that has serious problems displaying. And I don't believe the problem lies with those programs, because both of them work fine on another computer with Intel graphics. I am currently running up-to-date testing. Kernel is 2.6.30 (linux-image-2.6.30-1-686). I tried two older kernels (linux-image-2.6.22-3-vserver-k7 and also linux-image-2.6.26-2-vserver-686) but that made no difference. Mesa is currently at 7.5.1-1, and when I tried the newer 7.6-1 from unstable that didn't make any difference either. Setting LIBGL_ALWAYS_SOFTWARE=1 causes blender to display with fewer artifacts, but still is not completely right. Perhaps that's a separate bug, I don't know. Anyway, I can make a screenshot of that if it would be helpful. I have no xorg.conf, but I have attached my Xorg.0.log. Output of lspci -v is below. Let me know if there are any more questions, or if there is anything else I can do to help. Thanks, James Dietrich -- Output of lspci -v: 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) Subsystem: ASUSTeK Computer Inc. A7V133/A7V133-C Mainboard Flags: bus master, medium devsel, latency 8 Memory at e6000000 (32-bit, prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: agpgart-via 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: e2800000-e3dfffff Prefetchable memory behind bridge: e3f00000-e5ffffff Capabilities: <access denied> 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) Subsystem: ASUSTeK Computer Inc. A7V133/A7V133-C Mainboard Flags: bus master, stepping, medium devsel, latency 0 Capabilities: <access denied> Kernel driver in use: parport_pc 00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Flags: bus master, medium devsel, latency 32 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at d800 [size=16] Capabilities: <access denied> Kernel driver in use: VIA_IDE 00:04.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) (prog-if 00 [UHCI]) Subsystem: First International Computer, Inc. VA-502 Mainboard Flags: bus master, medium devsel, latency 32, IRQ 4 I/O ports at d400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:04.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16) (prog-if 00 [UHCI]) Subsystem: First International Computer, Inc. VA-502 Mainboard Flags: bus master, medium devsel, latency 32, IRQ 4 I/O ports at d000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:04.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) Subsystem: ASUSTeK Computer Inc. A7V133/A7V133-C Mainboard Flags: medium devsel, IRQ 9 Capabilities: <access denied> 00:04.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) Subsystem: ASUSTeK Computer Inc. A7V133/A7V133-C Mainboard Flags: medium devsel, IRQ 10 I/O ports at b800 [size=256] I/O ports at b400 [size=4] I/O ports at b000 [size=4] Capabilities: <access denied> Kernel driver in use: VIA 82xx Audio 00:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24) Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100 Flags: bus master, medium devsel, latency 32, IRQ 10 I/O ports at a400 [size=128] Memory at e2000000 (32-bit, non-prefetchable) [size=128] [virtual] Expansion ROM at 50000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: 3c59x 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400/G450 (rev 04) (prog-if 00 [VGA controller]) Subsystem: Matrox Graphics, Inc. Millennium G400 32Mb SGRAM Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at e4000000 (32-bit, prefetchable) [size=32M] Memory at e3000000 (32-bit, non-prefetchable) [size=16K] Memory at e2800000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at e3ff0000 [disabled] [size=64K] Capabilities: <access denied> -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.30-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libgl1-mesa-dri depends on: ii libc6 2.9-25 GNU C Library: Shared libraries ii libdrm-intel1 2.4.13-1 Userspace interface to intel-speci ii libdrm2 2.4.13-1 Userspace interface to kernel DRM ii libexpat1 2.0.1-4 XML parsing C library - runtime li libgl1-mesa-dri recommends no packages. Versions of packages libgl1-mesa-dri suggests: pn libglide3 <none> (no description available) -- no debconf information -- jdietrch@fastmail.fmAttachment: screenshot_blender.png
Description: PNG imageThis is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.3.901 (1.6.4 RC 1) Release Date: 2009-8-25 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.30.6-dsa-ia32 i686 Debian Current Operating System: Linux saturn 2.6.30-1-686 #1 SMP Sat Aug 15 19:11:58 UTC 2009 i686 Build Date: 14 September 2009 05:23:17PM xorg-server 2:1.6.3.901-1 (buildd@murphy.debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 7 12:17:14 2009 (II) Loader magic: 0xa40 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0:1:0:0) 102b:0525:102b:19f8 Matrox Graphics, Inc. MGA G400/G450 rev 4, Mem @ 0xe4000000/33554432, 0xe3000000/16384, 0xe2800000/8388608, BIOS @ 0x????????/65536 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default mga Device 0" Driver "mga" EndSection Section "Screen" Identifier "Builtin Default mga Screen 0" Device "Builtin Default mga Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default mga Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default fbdev Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default mga Screen 0" (0) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default mga Device 0" (==) No monitor specified for screen "Builtin Default mga Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (1) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (2) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "mga" (II) Loading /usr/lib/xorg/modules/drivers//mga_drv.so (II) Module mga: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.4.11 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "vesa" (WW) Warning, couldn't open module vesa (II) UnloadModule: "vesa" (EE) Failed to load module "vesa" (module does not exist, 0) (II) LoadModule: "fbdev" (WW) Warning, couldn't open module fbdev (II) UnloadModule: "fbdev" (EE) Failed to load module "fbdev" (module does not exist, 0) (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim, mgag200 eW Nuvoton, mgag400, mgag550 (II) Primary Device is: PCI 01@00:00:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (--) MGA(0): Chipset: "mgag400" (G400) (--) MGA(0): Linear framebuffer at 0xE4000000 (--) MGA(0): MMIO registers at 0xE3000000 (--) MGA(0): Pseudo-DMA transfer window at 0xE2800000 (II) MGA(0): Creating default Display subsection in Screen section "Builtin Default mga Screen 0" for depth/fbbpp 24/32 (==) MGA(0): Depth 24, (--) framebuffer bpp 32 (==) MGA(0): RGB weight 888 (==) MGA(0): Using AGP 1x mode (==) MGA(0): Using HW cursor (==) MGA(0): Using XAA acceleration (--) MGA(0): Video BIOS info block at offset 0x07A60 (==) MGA(0): VideoRAM: 32768 kByte (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) MGA(0): I2C bus "DDC P1" initialized. (II) MGA(0): I2C device "DDC P1:E-EDID segment register" registered at address 0x60. (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0. (--) MGA(0): No DDC signal (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) MGA(0): initializing int10 (II) MGA(0): Primary V_BIOS segment is: 0xc000 (II) MGA(0): VESA BIOS detected (II) MGA(0): VESA VBE Version 2.0 (II) MGA(0): VESA VBE Total Mem: 32768 kB (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc. (II) MGA(0): VESA VBE OEM Software Rev: 1.3 (II) MGA(0): VESA VBE OEM Vendor: Matrox (II) MGA(0): VESA VBE OEM Product: Matrox G400 (II) MGA(0): VESA VBE OEM Product Rev: 00 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) MGA(0): VESA VBE DDC supported (II) MGA(0): VESA VBE DDC Level 2 (II) MGA(0): VESA VBE DDC transfer in appr. 1 sec. (II) MGA(0): VESA VBE DDC read successfully (II) MGA(0): VBE monitor info (II) MGA(0): Manufacturer: DEL Model: a00f Serial#: 811157331 (II) MGA(0): Year: 2005 Week: 40 (II) MGA(0): EDID Version: 1.3 (II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) MGA(0): Sync: Separate Composite SyncOnGreen (II) MGA(0): Max Image Size [cm]: horiz.: 52 vert.: 33 (II) MGA(0): Gamma: 2.20 (II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) MGA(0): Default color space is primary color space (II) MGA(0): First detailed timing is preferred mode (II) MGA(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.607 (II) MGA(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328 (II) MGA(0): Supported established timings: (II) MGA(0): 720x400@70Hz (II) MGA(0): 640x480@60Hz (II) MGA(0): 640x480@75Hz (II) MGA(0): 800x600@60Hz (II) MGA(0): 800x600@75Hz (II) MGA(0): 1024x768@60Hz (II) MGA(0): 1024x768@75Hz (II) MGA(0): 1280x1024@75Hz (II) MGA(0): Manufacturer's mask: 0 (II) MGA(0): Supported standard timings: (II) MGA(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) MGA(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) MGA(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) MGA(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179 (II) MGA(0): Supported detailed timing: (II) MGA(0): clock: 154.0 MHz Image Size: 519 x 324 mm (II) MGA(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 (II) MGA(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 (II) MGA(0): Serial No: T613359S0YGS (II) MGA(0): Monitor name: DELL 2405FPW (II) MGA(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz (II) MGA(0): EDID (in hex): (II) MGA(0): 00ffffffffffff0010ac0fa053475930 (II) MGA(0): 280f01030e342178eeee50a3544c9b26 (II) MGA(0): 0f5054a54b008180a940714fb3000101 (II) MGA(0): 010101010101283c80a070b023403020 (II) MGA(0): 360007442100001a000000ff00543631 (II) MGA(0): 33333539533059475320000000fc0044 (II) MGA(0): 454c4c20323430354650570a000000fd (II) MGA(0): 00384c1e5111000a2020202020200029 (II) MGA(0): end of monitor info (II) MGA(0): EDID vendor "DEL", prod id 40975 (II) MGA(0): Using EDID range info for horizontal sync (II) MGA(0): Using EDID range info for vertical refresh (II) MGA(0): Printing DDC gathered Modelines: (II) MGA(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) MGA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) MGA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) MGA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) MGA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) MGA(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) MGA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) MGA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) MGA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) MGA(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) MGA(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) MGA(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) MGA(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0) (==) MGA(0): Min pixel clock is 17 MHz (--) MGA(0): Max pixel clock is 300 MHz (II) MGA(0): <default monitor>: Using hsync range of 30.00-81.00 kHz (II) MGA(0): <default monitor>: Using vrefresh range of 56.00-76.00 Hz (II) MGA(0): <default monitor>: Using maximum pixel clock of 170.00 MHz (II) MGA(0): Estimated virtual size for aspect ratio 1.5758 is 1920x1200 (II) MGA(0): Clock range: 17.75 to 300.00 MHz (II) MGA(0): Not using default mode "640x350" (vrefresh out of range) (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x400" (vrefresh out of range) (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "720x400" (vrefresh out of range) (II) MGA(0): Not using default mode "360x200" (vrefresh out of range) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "640x480" (vrefresh out of range) (II) MGA(0): Not using default mode "320x240" (vrefresh out of range) (II) MGA(0): Not using default mode "800x600" (vrefresh out of range) (II) MGA(0): Not using default mode "400x300" (vrefresh out of range) (II) MGA(0): Not using default mode "1024x768" (vrefresh out of range) (II) MGA(0): Not using default mode "512x384" (vrefresh out of range) (II) MGA(0): Not using default mode "1024x768" (vrefresh out of range) (II) MGA(0): Not using default mode "512x384" (vrefresh out of range) (II) MGA(0): Not using default mode "1280x960" (hsync out of range) (II) MGA(0): Not using default mode "640x480" (hsync out of range) (II) MGA(0): Not using default mode "1280x1024" (hsync out of range) (II) MGA(0): Not using default mode "640x512" (hsync out of range) (II) MGA(0): Not using default mode "1600x1200" (mode clock too high) (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "800x600" (hsync out of range) (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "800x600" (hsync out of range) (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "800x600" (hsync out of range) (II) MGA(0): Not using default mode "1792x1344" (height too large for virtual size) (II) MGA(0): Not using default mode "896x672" (hsync out of range) (II) MGA(0): Not using default mode "1792x1344" (height too large for virtual size) (II) MGA(0): Not using default mode "896x672" (hsync out of range) (II) MGA(0): Not using default mode "1856x1392" (height too large for virtual size) (II) MGA(0): Not using default mode "928x696" (hsync out of range) (II) MGA(0): Not using default mode "1856x1392" (height too large for virtual size) (II) MGA(0): Not using default mode "928x696" (hsync out of range) (II) MGA(0): Not using default mode "1920x1440" (height too large for virtual size) (II) MGA(0): Not using default mode "960x720" (hsync out of range) (II) MGA(0): Not using default mode "1920x1440" (height too large for virtual size) (II) MGA(0): Not using default mode "960x720" (hsync out of range) (II) MGA(0): Not using default mode "1152x864" (vrefresh out of range) (II) MGA(0): Not using default mode "576x432" (vrefresh out of range) (II) MGA(0): Not using default mode "1152x864" (vrefresh out of range) (II) MGA(0): Not using default mode "576x432" (vrefresh out of range) (II) MGA(0): Not using default mode "1152x864" (hsync out of range) (II) MGA(0): Not using default mode "576x432" (hsync out of range) (II) MGA(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (II) MGA(0): Not using default mode "1400x1050" (hsync out of range) (II) MGA(0): Not using default mode "700x525" (hsync out of range) (II) MGA(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking) (II) MGA(0): Not using default mode "1680x1050" (mode clock too high) (II) MGA(0): Not using default mode "1680x1050" (hsync out of range) (II) MGA(0): Not using default mode "840x525" (hsync out of range) (II) MGA(0): Not using default mode "1680x1050" (hsync out of range) (II) MGA(0): Not using default mode "840x525" (hsync out of range) (II) MGA(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking) (II) MGA(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking) (II) MGA(0): Not using default mode "1920x1440" (height too large for virtual size) (II) MGA(0): Not using default mode "960x720" (hsync out of range) (II) MGA(0): Not using default mode "2048x1536" (width too large for virtual size) (II) MGA(0): Not using default mode "1024x768" (hsync out of range) (II) MGA(0): Not using default mode "2048x1536" (width too large for virtual size) (II) MGA(0): Not using default mode "1024x768" (hsync out of range) (II) MGA(0): Not using default mode "2048x1536" (width too large for virtual size) (II) MGA(0): Not using default mode "1024x768" (hsync out of range) (--) MGA(0): Virtual size is 1920x1200 (pitch 1920) (**) MGA(0): *Driver mode "1920x1200": 154.0 MHz, 74.0 kHz, 60.0 Hz (II) MGA(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (**) MGA(0): *Driver mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz (II) MGA(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (**) MGA(0): *Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz (II) MGA(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (**) MGA(0): *Driver mode "1680x1050": 146.2 MHz, 65.3 kHz, 60.0 Hz (II) MGA(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (**) MGA(0): *Default mode "1680x1050": 146.2 MHz, 65.3 kHz, 60.0 Hz (II) MGA(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (**) MGA(0): *Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz (II) MGA(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz) (**) MGA(0): *Default mode "1400x1050": 145.1 MHz, 76.5 kHz, 70.0 Hz (II) MGA(0): Modeline "1400x1050"x70.0 145.06 1400 1496 1648 1896 1050 1051 1054 1093 -hsync +vsync (76.5 kHz) (**) MGA(0): *Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz (II) MGA(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz) (**) MGA(0): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz (II) MGA(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (**) MGA(0): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz (II) MGA(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (**) MGA(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz (II) MGA(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (**) MGA(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz (II) MGA(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (**) MGA(0): *Default mode "1440x900": 106.5 MHz, 55.9 kHz, 59.9 Hz (II) MGA(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (**) MGA(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz (II) MGA(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (**) MGA(0): *Default mode "1360x768": 84.8 MHz, 47.7 kHz, 59.8 Hz (II) MGA(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz) (**) MGA(0): *Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (II) MGA(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (**) MGA(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (II) MGA(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (**) MGA(0): *Default mode "1152x864": 105.0 MHz, 67.6 kHz, 75.0 Hz (II) MGA(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.6 kHz) (**) MGA(0): *Default mode "1152x864": 96.8 MHz, 63.0 kHz, 70.0 Hz (II) MGA(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz) (**) MGA(0): *Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz (II) MGA(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (**) MGA(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz (II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (**) MGA(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) MGA(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz (II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (**) MGA(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) MGA(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) MGA(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) MGA(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (**) MGA(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (**) MGA(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) MGA(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (**) MGA(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (**) MGA(0): *Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D) (II) MGA(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz) (**) MGA(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) MGA(0): *Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz) (**) MGA(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) MGA(0): *Default mode "840x525": 87.0 MHz, 76.6 kHz, 69.9 Hz (D) (II) MGA(0): Modeline "840x525"x69.9 87.00 840 900 988 1136 525 526 529 548 doublescan -hsync +vsync (76.6 kHz) (**) MGA(0): *Default mode "840x525": 73.1 MHz, 65.3 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz) (**) MGA(0): *Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D) (II) MGA(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz) (**) MGA(0): *Default mode "700x525": 72.5 MHz, 76.5 kHz, 70.1 Hz (D) (II) MGA(0): Modeline "700x525"x70.1 72.53 700 748 824 948 525 525 527 546 doublescan -hsync +vsync (76.5 kHz) (**) MGA(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz) (**) MGA(0): *Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D) (II) MGA(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz) (**) MGA(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz) (**) MGA(0): *Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D) (II) MGA(0): Modeline "720x450"x59.9 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz) (**) MGA(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (**) MGA(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (**) MGA(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz) (**) MGA(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) MGA(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz (II) MGA(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (**) MGA(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz) (**) MGA(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D) (II) MGA(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz) (**) MGA(0): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D) (II) MGA(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz) (**) MGA(0): *Default mode "576x432": 52.5 MHz, 67.6 kHz, 75.0 Hz (D) (II) MGA(0): Modeline "576x432"x75.0 52.49 576 612 676 776 432 432 434 451 doublescan -hsync +vsync (67.6 kHz) (**) MGA(0): *Default mode "576x432": 48.4 MHz, 63.0 kHz, 70.0 Hz (D) (II) MGA(0): Modeline "576x432"x70.0 48.38 576 612 672 768 432 432 434 450 doublescan -hsync +vsync (63.0 kHz) (**) MGA(0): *Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D) (II) MGA(0): Modeline "576x432"x60.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz) (**) MGA(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D) (II) MGA(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz) (**) MGA(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) (II) MGA(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz) (**) MGA(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz) (**) MGA(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) (II) MGA(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz) (**) MGA(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) (II) MGA(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz) (**) MGA(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) (II) MGA(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz) (**) MGA(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz) (**) MGA(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) (II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz) (**) MGA(0): Display dimensions: (520, 330) mm (**) MGA(0): DPI set to (93, 92) (II) MGA(0): YDstOrg is set to 0 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.2.1 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (--) MGA(0): 16 DWORD fifo (==) MGA(0): Default visual is TrueColor (II) MGA(0): [drm] bpp: 32 depth: 24 (II) MGA(0): [drm] Sarea 2200+664: 2864 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: node name is /dev/dri/card0 drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) [drm] loaded kernel module for "mga" driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) MGA(0): [drm] Using the DRM lock SAREA also for drawables. (II) MGA(0): [drm] framebuffer handle = 0xe4000000 (II) MGA(0): [drm] added 1 reserved context for kernel (II) MGA(0): X context handle = 0x1 (II) MGA(0): [drm] installed DRM signal handler (II) MGA(0): [dri] visual configs initialized (II) MGA(0): Memory manager initialized to (0,0) (1920,1968) (II) MGA(0): Largest offscreen area available: 1920 x 768 (II) MGA(0): Reserved back buffer at offset 0xe6c000 (II) MGA(0): Reserved depth buffer at offset 0x1736000 (II) MGA(0): Reserved 0 kb for textures at offset 0x2000000 (II) MGA(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid filled trapezoids 8x8 mono pattern filled rectangles 8x8 mono pattern filled trapezoids Indirect CPU to Screen color expansion Screen to Screen color expansion Solid Lines Dashed Lines Scanline Image Writes Driver provided FillMono8x8PatternRects replacement Setting up tile and stipple cache: 32 128x128 slots 14 256x256 slots (==) MGA(0): Backing store disabled (==) MGA(0): Silken mouse enabled (II) MGA(0): DPMS enabled (II) MGA(0): Using overlay video (II) MGA(0): [DRI] installation complete (II) MGA(0): [drm] Mapped 128 DMA buffers (II) MGA(0): [drm] dma control initialized, using IRQ 11 (II) MGA(0): Direct rendering enabled (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: Loaded and initialized /usr/lib/dri/mga_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) config/hal: Adding input device Composite USB PS2 Converter USB to PS2 Adaptor V3.10 (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.3, module version = 2.2.5 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: always reports core events (**) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: Device: "/dev/input/event4" (II) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: Found 10 mouse buttons (II) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: Found x and y relative axes (II) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: Found scroll wheel(s) (II) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: Found keys (II) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: Configuring as mouse (II) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: Configuring as keyboard (**) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: YAxisMapping: buttons 4 and 5 (**) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Composite USB PS2 Converter USB to PS2 Adaptor V3.10" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc101" (**) Option "xkb_layout" "us" (**) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: (accel) keeping acceleration scheme 1 (**) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: (accel) filter chain progression: 2.00 (**) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: (accel) filter stage 0: 20.00 ms (**) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: (accel) set acceleration profile 0 (II) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: initialized for relative axes. (II) config/hal: Adding input device Composite USB PS2 Converter USB to PS2 Adaptor V3.10 (**) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: always reports core events (**) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: Device: "/dev/input/event3" (II) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: Found keys (II) Composite USB PS2 Converter USB to PS2 Adaptor V3.10: Configuring as keyboard (II) XINPUT: Adding extended input device "Composite USB PS2 Converter USB to PS2 Adaptor V3.10" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc101" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc101" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc101" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event5" (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s) (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5 (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE) (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1 (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) filter chain progression: 2.00 (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) filter stage 0: 20.00 ms (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) set acceleration profile 0 (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
--- End Message ---
--- Begin Message ---
- To: jdietrch@fastmail.fm
- Cc: 550134-done@bugs.debian.org
- Subject: Re: Bug#550134: blender has many display artifacts with Matrox card
- From: Cyril Brulebois <kibi@debian.org>
- Date: Thu, 10 Feb 2011 16:12:30 +0100
- Message-id: <20110210151230.GA30398@debian.org>
- In-reply-to: <[🔎] 1297350249.5271.1419977235@webmail.messagingengine.com>
- References: <1254942758.6037.1338669155@webmail.messagingengine.com> <[🔎] 20110209121620.GA30590@debian.org> <[🔎] 1297350249.5271.1419977235@webmail.messagingengine.com>
Hi, jdietrch@fastmail.fm <jdietrch@fastmail.fm> (10/02/2011): > Perhaps this bug should be retitled; I just tried blender again, and > didn't notice any display problems. great. I'm closing this bug then. > In the original bug report, I also mentioned stellarium as having > display problems, and that is still the case. When stellarium > starts, it displays a splash screen. On this machine with the G400, > the splash screen shows only as a blank whitish square, except for a > faint outline of the version number in the lower right corner. Then > stellarium seems to run normally--I can zoom in and out, pan around, > etc. But the mouse pointer is invisible, which is an obvious > problem. Could you please file a separate bug report for that? Trying to keep one submitter and one bug per bug report helps us triaging things. > Again, please let me know if there's anything else I can do to help. > I'll be glad to test again with 7.10 once it propagates to testing. AFAICT (tried that yesterday) 7.10 from sid is installable on squeeze, in case you want to give it a try right now. KiBi.Attachment: signature.asc
Description: Digital signature
--- End Message ---
