libpciaccess: Changes to 'debian-unstable'
COPYING | 2
ChangeLog | 176 ++++++++++++++++++++++++++++++++++++++++++
Makefile.am | 4
configure.ac | 21 +++--
debian/changelog | 8 +
debian/control | 2
debian/copyright | 2
include/Makefile.am | 1
m4/ac_define_dir.m4 | 49 -----------
m4/ax_define_dir.m4 | 49 +++++++++++
man/Makefile.am | 34 ++++++++
man/scanpci.man | 44 ++++++++++
scanpci/.gitignore | 1
scanpci/Makefile.am | 29 +++++++
scanpci/scanpci.c | 215 ++++++++++++++++++++++++++++++++++++++++++++++++++++
src/.gitignore | 2
src/Makefile.am | 12 --
src/common_bridge.c | 8 -
src/pci_tools.h | 2
src/scanpci.c | 215 ----------------------------------------------------
src/scanpci.man | 44 ----------
src/solx_devfs.c | 2
22 files changed, 581 insertions(+), 341 deletions(-)
New commits:
commit 112a8aea56e09b796f76589f0316db5ec0a7343d
Author: Julien Cristau <jcristau@debian.org>
Date: Sun Feb 6 16:09:33 2011 +0100
Upload to unstable
diff --git a/debian/changelog b/debian/changelog
index 76c4bf8..a9758b3 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,10 +1,10 @@
-libpciaccess (0.12.1-1) UNRELEASED; urgency=low
+libpciaccess (0.12.1-1) unstable; urgency=low
* New upstream release.
* Bump Standards-Version to 3.9.1 (no changes).
* debian/copyright: Sun's copyrights belong to Oracle now.
- -- Julien Cristau <jcristau@debian.org> Sun, 06 Feb 2011 15:55:49 +0100
+ -- Julien Cristau <jcristau@debian.org> Sun, 06 Feb 2011 16:09:22 +0100
libpciaccess (0.12.0-1) unstable; urgency=low
commit 220ec1ddae760eb8a08e7d5c1c64e4011299403e
Author: Julien Cristau <jcristau@debian.org>
Date: Sun Feb 6 16:09:06 2011 +0100
debian/copyright: Sun's copyrights belong to Oracle now.
diff --git a/debian/changelog b/debian/changelog
index 002b307..76c4bf8 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -2,6 +2,7 @@ libpciaccess (0.12.1-1) UNRELEASED; urgency=low
* New upstream release.
* Bump Standards-Version to 3.9.1 (no changes).
+ * debian/copyright: Sun's copyrights belong to Oracle now.
-- Julien Cristau <jcristau@debian.org> Sun, 06 Feb 2011 15:55:49 +0100
diff --git a/debian/copyright b/debian/copyright
index e2321bb..14487f7 100644
--- a/debian/copyright
+++ b/debian/copyright
@@ -19,7 +19,7 @@ Copyright:
(C) Copyright IBM Corporation 2006, 2007
(C) Copyright Eric Anholt 2006
-Copyright 2007, 2008, 2009 Sun Microsystems, Inc.
+Copyright (c) 2007, 2008, 2009, Oracle and/or its affiliates.
Copyright 2009 Red Hat, Inc.
All Rights Reserved.
commit 1a6146850d0ab4d036c32e4d668a7395a88df7cc
Author: Julien Cristau <jcristau@debian.org>
Date: Sun Feb 6 16:07:25 2011 +0100
Bump Standards-Version to 3.9.1 (no changes).
diff --git a/debian/changelog b/debian/changelog
index 76664f5..002b307 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,6 +1,7 @@
libpciaccess (0.12.1-1) UNRELEASED; urgency=low
* New upstream release.
+ * Bump Standards-Version to 3.9.1 (no changes).
-- Julien Cristau <jcristau@debian.org> Sun, 06 Feb 2011 15:55:49 +0100
diff --git a/debian/control b/debian/control
index 7ccacba..0ac632b 100644
--- a/debian/control
+++ b/debian/control
@@ -10,7 +10,7 @@ Build-Depends:
zlib1g-dev,
xutils-dev (>= 1:7.5),
pkg-config,
-Standards-Version: 3.9.0
+Standards-Version: 3.9.1
Vcs-Git: git://git.debian.org/git/pkg-xorg/lib/libpciaccess
Vcs-Browser: http://git.debian.org/?p=pkg-xorg/lib/libpciaccess.git
commit da4f0b45303c9790dda8377dbef97f3bfff57417
Author: Julien Cristau <jcristau@debian.org>
Date: Sun Feb 6 15:56:18 2011 +0100
Bump changelogs
diff --git a/ChangeLog b/ChangeLog
index f263fae..cb640b9 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,179 @@
+commit d05ed57216726811388f17d7e87d7b6c7b8580ee
+Author: Alan Coopersmith <alan.coopersmith@oracle.com>
+Date: Wed Feb 2 20:50:17 2011 -0800
+
+ libpciaccess 0.12.1
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
+
+commit 7b4bd8222579b60bec6ab9dbf834d61b1fc7cc74
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Fri Jan 28 16:07:07 2011 -0500
+
+ config: replace deprecated AC_HELP_STRING with AS_HELP_STRING
+
+ This silences an Automake warning.
+
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit 5fdae72cc62f4341ae5fa0b7696809d4ccd1bd32
+Author: Alan Coopersmith <alan.coopersmith@oracle.com>
+Date: Thu Jan 13 22:05:02 2011 -0800
+
+ config: remove AC_PROG_CC as it overrides AC_PROG_C_C99
+
+ XORG_STRICT_OPTION from XORG_DEFAULT_OPTIONS calls
+ AC_PROG_C_C99. This sets gcc with -std=gnu99.
+ If AC_PROG_CC macro is called afterwards, it resets CC to gcc.
+
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
+
+commit 48d08f09e36d4aa8e02812874794937d7c778b43
+Author: Alan Coopersmith <alan.coopersmith@oracle.com>
+Date: Thu Jan 13 21:58:02 2011 -0800
+
+ config: replace deprecated AM_CONFIG_HEADER with AC_CONFIG_HEADERS
+
+ Regroup AC statements under the Autoconf initialization section.
+ Regroup AM statements under the Automake initialization section.
+ Add missing AC_CONFIG_SRCDIR
+ Replace obsolete argument to AC_OUTPUT with AC_CONFIG_FILES
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
+
+commit 066032e08407311cfc24dbc1db3245cf8133ad94
+Author: Bryce Harrington <bryce@canonical.com>
+Date: Tue Dec 14 12:03:48 2010 -0500
+
+ Fix detection of multi-function cards
+
+ Bit 7 of the pci device header type is an indicator of multi-function
+ devices, so needs to be masked when examining the bridge type.
+ Thanks go to Chih-Pin Wu for finding the bug and its fix.
+
+ https://bugs.launchpad.net/ubuntu/+source/libpciaccess/+bug/681207
+
+ Reviewed-by: Adam Jackson <ajax@redhat.com>
+ Signed-off-by: Bryce Harrington <bryce@canonical.com>
+
+commit 6220537628fb5e55c94d7dbe1ec190bf38d3b01b
+Author: Jesse Barnes <jbarnes@virtuousgeek.org>
+Date: Mon Dec 6 12:18:19 2010 -0800
+
+ Revert "Don't try to use bogus bridge data"
+
+ This reverts commit 2bda5b733bb12854760750c08138db95e77aea0c.
+
+ It actually conflicts with 9ba94caf57e3a8c3e9c6f3f5f068f4a7a7b3ff9d
+ which came earlier, but I didn't catch it probably because I did a blind
+ rebase before pushing.
+
+ When reading bridge bus info, we may need to read out the current bridge
+ info if the PCI bridge private is uninitialized, so remove the check at
+ the top that would always short circuit the case where the priv was
+ still 0.
+
+ References:
+ https://bugs.launchpad.net/ubuntu/+source/libpciaccess/+bug/681207.
+
+ Reported-by: Bryce Harrington <bryce@canonical.com>
+ Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
+
+commit 30bfd795557cada4a3c2ce36329ceb22160acff8
+Author: Alan Coopersmith <alan.coopersmith@oracle.com>
+Date: Sun Nov 21 11:14:05 2010 -0800
+
+ Sun's copyrights belong to Oracle now
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
+
+commit e29e477ff84ab16938e58ae2719358c14c86a500
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Fri Oct 15 17:34:16 2010 -0400
+
+ config: use LDADD to obtain appropriate dependencies
+
+ In generated scanpci/Makefile, this line is added:
+ scanpci_DEPENDENCIES = $(top_builddir)/src/libpciaccess.la
+
+ If the content of the library changes, the tool will rebuild.
+ When scanpci was in the same directory as the library, the .la file was used.
+ This will also ensure the "installed" pciaccess library is not used.
+
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit fd476deabb97d08086ad465c4d0e913c9437a6bb
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sun Sep 26 14:57:19 2010 -0400
+
+ include: add a Makefile to install and distribute header file
+
+ Makefiles are simpler when they only handle what is in their
+ directory.
+
+ Reviewed-by: Rémi Cardona <remi@gentoo.org>
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit 2b5c81c2d8c643e58ac69d1d7f7a626fc392b1ea
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sun Sep 26 14:42:50 2010 -0400
+
+ config: replace INCLUDES, which is deprecated, with AM_CPPFLAGS
+
+ Fixes an Automake warning.
+
+ Reviewed-by: Rémi Cardona <remi@gentoo.org>
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit b4ee1ccfcd9e9d41033db7b6b5e0a771ae5939d2
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sun Aug 22 08:10:23 2010 -0400
+
+ config: provide a makefile for scanpci man pages
+
+ Reviewed-by: Rémi Cardona <remi@gentoo.org>
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit 8daa135ae9eae0a0ed48cc68d6abce16141cd426
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sun Sep 26 08:39:57 2010 -0400
+
+ scanpci.c: remove offending whitespace as reported by git diff
+
+ Reviewed-by: Rémi Cardona <remi@gentoo.org>
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit dcb79a20cba1eaaa83158b80bb538d50b003bd79
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sun Aug 22 08:10:23 2010 -0400
+
+ config: provide a makefile for scanpci dev tool
+
+ No function changes.
+
+ Note that automake generates a wrapper script if libpciaccess
+ is not installed at configuration time, which is the most common case.
+
+ If it is installed at configuration time, you get an executable.
+
+ The makefile build order ensures the lib is build before scanpci.
+
+ Reviewed-by: Rémi Cardona <remi@gentoo.org>
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit 555772964820d88f9481eb48d0431dddd8ba7aa5
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sat Aug 21 19:54:04 2010 -0400
+
+ config: upgrade AC_DEFINE_DIR to AX_DEFINE_DIR
+
+ Use the latest version now hosted by GNU.
+ The renaming protects Autoconf namespace.
+ There is no functional change in the macro.
+
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
commit fa3f1c1ea8ce4b45976e11520856cfa164f8b92d
Author: Dave Airlie <airlied@redhat.com>
Date: Wed Jul 21 09:39:26 2010 +1000
diff --git a/debian/changelog b/debian/changelog
index 4000e37..76664f5 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,9 @@
+libpciaccess (0.12.1-1) UNRELEASED; urgency=low
+
+ * New upstream release.
+
+ -- Julien Cristau <jcristau@debian.org> Sun, 06 Feb 2011 15:55:49 +0100
+
libpciaccess (0.12.0-1) unstable; urgency=low
* New upstream release:
commit d05ed57216726811388f17d7e87d7b6c7b8580ee
Author: Alan Coopersmith <alan.coopersmith@oracle.com>
Date: Wed Feb 2 20:50:17 2011 -0800
libpciaccess 0.12.1
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
diff --git a/configure.ac b/configure.ac
index 75d5b0a..c3203d8 100644
--- a/configure.ac
+++ b/configure.ac
@@ -24,7 +24,7 @@ dnl Process this file with autoconf to create configure.
# Initialize Autoconf
AC_PREREQ([2.60])
-AC_INIT([libpciaccess],[0.12.0],
+AC_INIT([libpciaccess],[0.12.1],
[https://bugs.freedesktop.org/enter_bug.cgi?product=xorg&component=libpciaccess],[libpciaccess])
AC_CONFIG_SRCDIR([Makefile.am])
AC_CONFIG_HEADERS([config.h])
commit 7b4bd8222579b60bec6ab9dbf834d61b1fc7cc74
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Fri Jan 28 16:07:07 2011 -0500
config: replace deprecated AC_HELP_STRING with AS_HELP_STRING
This silences an Automake warning.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
diff --git a/configure.ac b/configure.ac
index 4966dae..75d5b0a 100644
--- a/configure.ac
+++ b/configure.ac
@@ -43,7 +43,7 @@ XORG_DEFAULT_OPTIONS
AC_PROG_LIBTOOL
pciids_path=/usr/share/hwdata
-AC_ARG_WITH(pciids-path, AC_HELP_STRING([--with-pciids-path=PCIIDS_PATH],
+AC_ARG_WITH(pciids-path, AS_HELP_STRING([--with-pciids-path=PCIIDS_PATH],
[Path to pci.ids file]), [pciids_path="$withval"])
AX_DEFINE_DIR(PCIIDS_PATH, pciids_path, [Path to pci.ids])
@@ -56,7 +56,7 @@ if test "x$LINUX_ROM" = xyes; then
fi
use_zlib=no
-AC_ARG_WITH(zlib, AC_HELP_STRING([--with-zlib],
+AC_ARG_WITH(zlib, AS_HELP_STRING([--with-zlib],
[Enable zlib support to read gzip compressed pci.ids]),
[use_zlib="$withval"])
if test "x$use_zlib" = xyes; then
commit 5fdae72cc62f4341ae5fa0b7696809d4ccd1bd32
Author: Alan Coopersmith <alan.coopersmith@oracle.com>
Date: Thu Jan 13 22:05:02 2011 -0800
config: remove AC_PROG_CC as it overrides AC_PROG_C_C99
XORG_STRICT_OPTION from XORG_DEFAULT_OPTIONS calls
AC_PROG_C_C99. This sets gcc with -std=gnu99.
If AC_PROG_CC macro is called afterwards, it resets CC to gcc.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
diff --git a/configure.ac b/configure.ac
index 873a514..4966dae 100644
--- a/configure.ac
+++ b/configure.ac
@@ -40,7 +40,6 @@ XORG_MACROS_VERSION(1.3)
XORG_DEFAULT_OPTIONS
# Check for progs
-AC_PROG_CC
AC_PROG_LIBTOOL
pciids_path=/usr/share/hwdata
commit 48d08f09e36d4aa8e02812874794937d7c778b43
Author: Alan Coopersmith <alan.coopersmith@oracle.com>
Date: Thu Jan 13 21:58:02 2011 -0800
config: replace deprecated AM_CONFIG_HEADER with AC_CONFIG_HEADERS
Regroup AC statements under the Autoconf initialization section.
Regroup AM statements under the Automake initialization section.
Add missing AC_CONFIG_SRCDIR
Replace obsolete argument to AC_OUTPUT with AC_CONFIG_FILES
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
diff --git a/configure.ac b/configure.ac
index 47cd733..873a514 100644
--- a/configure.ac
+++ b/configure.ac
@@ -22,9 +22,14 @@ dnl DEALINGS IN THE SOFTWARE.
dnl
dnl Process this file with autoconf to create configure.
+# Initialize Autoconf
AC_PREREQ([2.60])
+AC_INIT([libpciaccess],[0.12.0],
+ [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg&component=libpciaccess],[libpciaccess])
+AC_CONFIG_SRCDIR([Makefile.am])
+AC_CONFIG_HEADERS([config.h])
-AC_INIT(libpciaccess, 0.12.0, [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg&component=libpciaccess], libpciaccess)
+# Initialize Automake
AM_INIT_AUTOMAKE([foreign dist-bzip2])
AM_MAINTAINER_MODE
@@ -33,7 +38,6 @@ m4_ifndef([XORG_MACROS_VERSION],
[m4_fatal([must install xorg-macros 1.3 or later before running autoconf/autogen])])
XORG_MACROS_VERSION(1.3)
XORG_DEFAULT_OPTIONS
-AM_CONFIG_HEADER(config.h)
# Check for progs
AC_PROG_CC
@@ -122,9 +126,10 @@ AC_SUBST(PCIACCESS_CFLAGS)
AC_SUBST(PCIACCESS_LIBS)
-AC_OUTPUT([Makefile
+AC_CONFIG_FILES([Makefile
include/Makefile
man/Makefile
src/Makefile
scanpci/Makefile
pciaccess.pc])
+AC_OUTPUT
commit 066032e08407311cfc24dbc1db3245cf8133ad94
Author: Bryce Harrington <bryce@canonical.com>
Date: Tue Dec 14 12:03:48 2010 -0500
Fix detection of multi-function cards
Bit 7 of the pci device header type is an indicator of multi-function
devices, so needs to be masked when examining the bridge type.
Thanks go to Chih-Pin Wu for finding the bug and its fix.
https://bugs.launchpad.net/ubuntu/+source/libpciaccess/+bug/681207
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Bryce Harrington <bryce@canonical.com>
diff --git a/src/common_bridge.c b/src/common_bridge.c
index 2609d7c..871c1f6 100644
--- a/src/common_bridge.c
+++ b/src/common_bridge.c
@@ -290,7 +290,7 @@ pci_device_get_bridge_buses(struct pci_device * dev, int *primary_bus,
case 0x04:
if (priv->bridge.pci == NULL)
read_bridge_info(priv);
- if (priv->header_type == 0x01) {
+ if ((priv->header_type & 0x7f) == 0x01) {
*primary_bus = priv->bridge.pci->primary_bus;
*secondary_bus = priv->bridge.pci->secondary_bus;
*subordinate_bus = priv->bridge.pci->subordinate_bus;
@@ -304,7 +304,7 @@ pci_device_get_bridge_buses(struct pci_device * dev, int *primary_bus,
case 0x07:
if (priv->bridge.pcmcia == NULL)
read_bridge_info(priv);
- if (priv->header_type == 0x02) {
+ if ((priv->header_type & 0x7f) == 0x02) {
*primary_bus = priv->bridge.pcmcia->primary_bus;
*secondary_bus = priv->bridge.pcmcia->card_bus;
*subordinate_bus = priv->bridge.pcmcia->subordinate_bus;
commit 6220537628fb5e55c94d7dbe1ec190bf38d3b01b
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Mon Dec 6 12:18:19 2010 -0800
Revert "Don't try to use bogus bridge data"
This reverts commit 2bda5b733bb12854760750c08138db95e77aea0c.
It actually conflicts with 9ba94caf57e3a8c3e9c6f3f5f068f4a7a7b3ff9d
which came earlier, but I didn't catch it probably because I did a blind
rebase before pushing.
When reading bridge bus info, we may need to read out the current bridge
info if the PCI bridge private is uninitialized, so remove the check at
the top that would always short circuit the case where the priv was
still 0.
References:
https://bugs.launchpad.net/ubuntu/+source/libpciaccess/+bug/681207.
Reported-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
diff --git a/src/common_bridge.c b/src/common_bridge.c
index f37420f..2609d7c 100644
--- a/src/common_bridge.c
+++ b/src/common_bridge.c
@@ -270,10 +270,6 @@ pci_device_get_bridge_buses(struct pci_device * dev, int *primary_bus,
return ENODEV;
}
- if (!priv->bridge.pci) {
- return ENODEV;
- }
-
switch ((dev->device_class >> 8) & 0x0ff) {
case 0x00:
/* What to do for host bridges? I'm pretty sure this isn't right.
commit 30bfd795557cada4a3c2ce36329ceb22160acff8
Author: Alan Coopersmith <alan.coopersmith@oracle.com>
Date: Sun Nov 21 11:14:05 2010 -0800
Sun's copyrights belong to Oracle now
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
diff --git a/COPYING b/COPYING
index 05c5941..2f9f9c3 100644
--- a/COPYING
+++ b/COPYING
@@ -1,6 +1,6 @@
(C) Copyright IBM Corporation 2006, 2007
(C) Copyright Eric Anholt 2006
-Copyright 2007, 2008, 2009 Sun Microsystems, Inc.
+Copyright (c) 2007, 2008, 2009, Oracle and/or its affiliates.
Copyright 2009 Red Hat, Inc.
All Rights Reserved.
diff --git a/src/pci_tools.h b/src/pci_tools.h
index b353b31..3766890 100644
--- a/src/pci_tools.h
+++ b/src/pci_tools.h
@@ -1,5 +1,5 @@
/*
- * Copyright © 2007 Sun Microsystems, Inc. All rights reserved.
+ * Copyright (c) 2007, Oracle and/or its affiliates. All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
diff --git a/src/solx_devfs.c b/src/solx_devfs.c
index 73538b2..24bb1b9 100644
--- a/src/solx_devfs.c
+++ b/src/solx_devfs.c
@@ -1,6 +1,6 @@
/*
* (C) Copyright IBM Corporation 2006
- * Copyright 2007, 2009 Sun Microsystems, Inc.
+ * Copyright (c) 2007, 2009, Oracle and/or its affiliates.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
commit e29e477ff84ab16938e58ae2719358c14c86a500
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Fri Oct 15 17:34:16 2010 -0400
config: use LDADD to obtain appropriate dependencies
In generated scanpci/Makefile, this line is added:
scanpci_DEPENDENCIES = $(top_builddir)/src/libpciaccess.la
If the content of the library changes, the tool will rebuild.
When scanpci was in the same directory as the library, the .la file was used.
This will also ensure the "installed" pciaccess library is not used.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
diff --git a/scanpci/Makefile.am b/scanpci/Makefile.am
index 6fdf86e..68d54f4 100644
--- a/scanpci/Makefile.am
+++ b/scanpci/Makefile.am
@@ -24,6 +24,6 @@
noinst_PROGRAMS = scanpci
AM_CPPFLAGS = -I$(top_srcdir)/include
-AM_LDFLAGS = -L$(top_builddir)/src -lpciaccess
+LDADD = $(top_builddir)/src/libpciaccess.la
scanpci_SOURCES = scanpci.c
commit fd476deabb97d08086ad465c4d0e913c9437a6bb
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Sun Sep 26 14:57:19 2010 -0400
include: add a Makefile to install and distribute header file
Makefiles are simpler when they only handle what is in their
directory.
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
diff --git a/Makefile.am b/Makefile.am
index ea30cd2..a285275 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -25,7 +25,7 @@
ACLOCAL_AMFLAGS = -I m4
# Order: scanpci depends on libpciaccess built in src
-SUBDIRS = man src scanpci
+SUBDIRS = include man src scanpci
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = pciaccess.pc
diff --git a/configure.ac b/configure.ac
index 1c2a3ca..47cd733 100644
--- a/configure.ac
+++ b/configure.ac
@@ -123,6 +123,7 @@ AC_SUBST(PCIACCESS_LIBS)
AC_OUTPUT([Makefile
+ include/Makefile
man/Makefile
src/Makefile
scanpci/Makefile
diff --git a/include/Makefile.am b/include/Makefile.am
new file mode 100644
index 0000000..b668192
--- /dev/null
+++ b/include/Makefile.am
@@ -0,0 +1 @@
+include_HEADERS = pciaccess.h
diff --git a/src/Makefile.am b/src/Makefile.am
index 523e4b1..7842118 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -71,8 +71,3 @@ libpciaccess_la_SOURCES = common_bridge.c \
libpciaccess_la_LIBADD = $(PCIACCESS_LIBS)
libpciaccess_la_LDFLAGS = -version-number 0:10:8 -no-undefined
-
-libpciaccessincludedir = $(includedir)
-libpciaccessinclude_HEADERS = \
- $(top_srcdir)/include/pciaccess.h
-
commit 2b5c81c2d8c643e58ac69d1d7f7a626fc392b1ea
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Sun Sep 26 14:42:50 2010 -0400
config: replace INCLUDES, which is deprecated, with AM_CPPFLAGS
Fixes an Automake warning.
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
diff --git a/src/Makefile.am b/src/Makefile.am
index 0d774e0..523e4b1 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -21,6 +21,7 @@
# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
# DEALINGS IN THE SOFTWARE.
+AM_CPPFLAGS = -I$(top_srcdir)/include
AM_CFLAGS = $(CWARNFLAGS) @PCIACCESS_CFLAGS@
lib_LTLIBRARIES = libpciaccess.la
@@ -67,8 +68,6 @@ libpciaccess_la_SOURCES = common_bridge.c \
$(VGA_ARBITER) \
$(OS_SUPPORT)
-INCLUDES = -I$(top_srcdir)/include
-
libpciaccess_la_LIBADD = $(PCIACCESS_LIBS)
libpciaccess_la_LDFLAGS = -version-number 0:10:8 -no-undefined
commit b4ee1ccfcd9e9d41033db7b6b5e0a771ae5939d2
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Sun Aug 22 08:10:23 2010 -0400
config: provide a makefile for scanpci man pages
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
diff --git a/Makefile.am b/Makefile.am
index 31d20a0..ea30cd2 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -25,13 +25,12 @@
ACLOCAL_AMFLAGS = -I m4
# Order: scanpci depends on libpciaccess built in src
-SUBDIRS = src scanpci
+SUBDIRS = man src scanpci
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = pciaccess.pc
MAINTAINERCLEANFILES = ChangeLog INSTALL
-EXTRA_DIST = src/scanpci.man
.PHONY: ChangeLog INSTALL
diff --git a/configure.ac b/configure.ac
index 6980675..1c2a3ca 100644
--- a/configure.ac
+++ b/configure.ac
@@ -123,6 +123,7 @@ AC_SUBST(PCIACCESS_LIBS)
AC_OUTPUT([Makefile
+ man/Makefile
src/Makefile
scanpci/Makefile
pciaccess.pc])
diff --git a/man/Makefile.am b/man/Makefile.am
new file mode 100644
index 0000000..45edd45
--- /dev/null
+++ b/man/Makefile.am
@@ -0,0 +1,34 @@
+#
+# Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice (including the next
+# paragraph) shall be included in all copies or substantial portions of the
+# Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+# DEALINGS IN THE SOFTWARE.
+#
+
+appman_PRE = scanpci.man
+noinst_DATA = $(appman_PRE:man=$(APP_MAN_SUFFIX))
+
+EXTRA_DIST = $(appman_PRE)
+CLEANFILES = $(noinst_DATA)
+
+# String replacements in MAN_SUBSTS now come from xorg-macros.m4 via configure
+SUFFIXES = .$(APP_MAN_SUFFIX) .man
+
+.man.$(APP_MAN_SUFFIX):
+ $(AM_V_GEN)$(SED) $(MAN_SUBSTS) < $< > $@
diff --git a/man/scanpci.man b/man/scanpci.man
new file mode 100644
index 0000000..a748edf
--- /dev/null
+++ b/man/scanpci.man
@@ -0,0 +1,44 @@
+.\" Copyright (C) 2000 The XFree86 Project, Inc. All Rights Reserved.
+.\"
+.\" Permission is hereby granted, free of charge, to any person obtaining a copy
+.\" of this software and associated documentation files (the "Software"), to
+.\" deal in the Software without restriction, including without limitation the
+.\" rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+.\" sell copies of the Software, and to permit persons to whom the Software is
+.\" furnished to do so, subject to the following conditions:
+.\"
+.\" The above copyright notice and this permission notice shall be included in
+.\" all copies or substantial portions of the Software.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+.\" IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+.\" FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+.\" XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+.\" IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+.\" CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+.\"
+.\" Except as contained in this notice, the name of the XFree86 Project shall
+.\" not be used in advertising or otherwise to promote the sale, use or other
+.\" dealings in this Software without prior written authorization from the
+.\" XFree86 Project.
+.\"
+.TH SCANPCI 1 __xorgversion__
+.SH NAME
+scanpci - scan/probe PCI buses
+.SH SYNOPSIS
+.B scanpci
+.RB [ \-v ]
+.SH DESCRIPTION
+.I Scanpci
+is a utility that can be used to scan PCI buses and report information
+about the configuration space settings for each PCI device.
+On most platforms,
+.I scanpci
+can only be run by the root user.
+.SH OPTIONS
+.TP 8
+.B \-v
+Print the configuration space information for each device in a verbose
+format. Without this option, only a brief description is printed for
+each device.
+
diff --git a/src/scanpci.man b/src/scanpci.man
deleted file mode 100644
index aec7b2e..0000000
--- a/src/scanpci.man
+++ /dev/null
@@ -1,44 +0,0 @@
-.\" Copyright (C) 2000 The XFree86 Project, Inc. All Rights Reserved.
-.\"
-.\" Permission is hereby granted, free of charge, to any person obtaining a copy
-.\" of this software and associated documentation files (the "Software"), to
-.\" deal in the Software without restriction, including without limitation the
-.\" rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-.\" sell copies of the Software, and to permit persons to whom the Software is
-.\" furnished to do so, subject to the following conditions:
-.\"
-.\" The above copyright notice and this permission notice shall be included in
-.\" all copies or substantial portions of the Software.
-.\"
-.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-.\" IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-.\" FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-.\" XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
-.\" IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-.\" CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-.\"
-.\" Except as contained in this notice, the name of the XFree86 Project shall
-.\" not be used in advertising or otherwise to promote the sale, use or other
-.\" dealings in this Software without prior written authorization from the
-.\" XFree86 Project.
-.\"
-.TH SCANPCI 1 __xorgversion__
-.SH NAME
-scanpci - scan/probe PCI buses
-.SH SYNOPSIS
-.B scanpci
-.RB [ \-v ]
-.SH DESCRIPTION
-.I Scanpci
-is a utility that can be used to scan PCI buses and report information
-about the configuration space settings for each PCI device.
-On most platforms,
-.I scanpci
-can only be run by the root user.
-.SH OPTIONS
-.TP 8
-.B \-v
-Print the configuration space information for each device in a verbose
-format. Without this option, only a brief description is printed for
-each device.
-
commit 8daa135ae9eae0a0ed48cc68d6abce16141cd426
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Sun Sep 26 08:39:57 2010 -0400
scanpci.c: remove offending whitespace as reported by git diff
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
diff --git a/scanpci/scanpci.c b/scanpci/scanpci.c
index 34ec664..36ecf04 100644
--- a/scanpci/scanpci.c
+++ b/scanpci/scanpci.c
@@ -67,7 +67,7 @@ print_pci_device( struct pci_device * dev, int verbose )
printf("domain 0x%04x ", dev->domain);
printf("bus 0x%04x cardnum 0x%02x function 0x%02x:"
" vendor 0x%04x device 0x%04x\n",
- dev->bus,
+ dev->bus,
dev->dev,
dev->func,
dev->vendor_id,
@@ -78,7 +78,7 @@ print_pci_device( struct pci_device * dev, int verbose )
else {
printf( " %s\n", dev_name );
}
-
+
if ( verbose ) {
unsigned i;
uint16_t command, status;
@@ -109,7 +109,7 @@ print_pci_device( struct pci_device * dev, int verbose )
pci_device_cfg_read_u16( dev, & command, 4 );
pci_device_cfg_read_u16( dev, & status, 6 );
- printf( " STATUS 0x%04x COMMAND 0x%04x\n",
+ printf( " STATUS 0x%04x COMMAND 0x%04x\n",
status,
command );
printf( " CLASS 0x%02x 0x%02x 0x%02x REVISION 0x%02x\n",
@@ -128,7 +128,7 @@ print_pci_device( struct pci_device * dev, int verbose )
header_type,
latency_timer,
cache_line_size );
-
+
pci_device_probe( dev );
for ( i = 0 ; i < 6 ; i++ ) {
if ( dev->regions[i].base_addr != 0 ) {
@@ -143,7 +143,7 @@ print_pci_device( struct pci_device * dev, int verbose )
printf( " PREFETCHABLE" );
}
}
-
+
printf( "\n" );
}
}
commit dcb79a20cba1eaaa83158b80bb538d50b003bd79
Author: Gaetan Nadon <memsize@videotron.ca>
Date: Sun Aug 22 08:10:23 2010 -0400
config: provide a makefile for scanpci dev tool
No function changes.
Note that automake generates a wrapper script if libpciaccess
is not installed at configuration time, which is the most common case.
If it is installed at configuration time, you get an executable.
The makefile build order ensures the lib is build before scanpci.
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
diff --git a/Makefile.am b/Makefile.am
index ff8db2f..31d20a0 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -24,13 +24,14 @@
# Include autoconf macros from m4 subdir
ACLOCAL_AMFLAGS = -I m4
-SUBDIRS = src
+# Order: scanpci depends on libpciaccess built in src
+SUBDIRS = src scanpci
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = pciaccess.pc
MAINTAINERCLEANFILES = ChangeLog INSTALL
-EXTRA_DIST = src/scanpci.c src/scanpci.man
+EXTRA_DIST = src/scanpci.man
.PHONY: ChangeLog INSTALL
diff --git a/configure.ac b/configure.ac
index c0e1e9b..6980675 100644
--- a/configure.ac
+++ b/configure.ac
@@ -124,4 +124,5 @@ AC_SUBST(PCIACCESS_LIBS)
AC_OUTPUT([Makefile
src/Makefile
+ scanpci/Makefile
pciaccess.pc])
diff --git a/scanpci/.gitignore b/scanpci/.gitignore
new file mode 100644
index 0000000..485d4b9
--- /dev/null
+++ b/scanpci/.gitignore
@@ -0,0 +1 @@
+scanpci
diff --git a/scanpci/Makefile.am b/scanpci/Makefile.am
new file mode 100644
index 0000000..6fdf86e
--- /dev/null
+++ b/scanpci/Makefile.am
@@ -0,0 +1,29 @@
+#
+# (C) Copyright IBM Corporation 2006
+# All Rights Reserved.
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
Reply to: