[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

xserver-xorg-video-suntcx: Changes to 'debian-unstable'



 debian/README.source   |   24 -
 debian/changelog       |   24 +
 debian/compat          |    2 
 debian/control         |   26 +-
 debian/patches/series  |    1 
 debian/rules           |  102 --------
 debian/xsfbs/repack.sh |   32 --
 debian/xsfbs/xsfbs.mk  |  285 ----------------------
 debian/xsfbs/xsfbs.sh  |  622 -------------------------------------------------
 9 files changed, 52 insertions(+), 1066 deletions(-)

New commits:
commit 707d5a9c4a50692ff52858fe9ee48b5cb3698208
Author: Cyril Brulebois <kibi@debian.org>
Date:   Sat Feb 5 14:58:16 2011 +0100

    Upload to unstable

diff --git a/debian/changelog b/debian/changelog
index 2f46556..4ac911c 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,4 +1,4 @@
-xserver-xorg-video-suntcx (1:1.1.1-5) UNRELEASED; urgency=low
+xserver-xorg-video-suntcx (1:1.1.1-5) unstable; urgency=low
 
   * Switch to dh:
     - Use debhelper 8.
@@ -13,7 +13,7 @@ xserver-xorg-video-suntcx (1:1.1.1-5) UNRELEASED; urgency=low
   * Bump Standards-Version to 3.9.1 (no changes needed).
   * Add quilt build-dep for future use.
 
- -- Cyril Brulebois <kibi@debian.org>  Fri, 04 Feb 2011 07:08:36 +0100
+ -- Cyril Brulebois <kibi@debian.org>  Sat, 05 Feb 2011 14:58:15 +0100
 
 xserver-xorg-video-suntcx (1:1.1.1-4) experimental; urgency=low
 

commit b13bf5f2b42453e60c0c3cef1b4f83e61107d3fd
Author: Cyril Brulebois <kibi@debian.org>
Date:   Sat Feb 5 09:32:30 2011 +0100

    Add a placeholding series file.

diff --git a/debian/patches/series b/debian/patches/series
new file mode 100644
index 0000000..fdffa2a
--- /dev/null
+++ b/debian/patches/series
@@ -0,0 +1 @@
+# placeholder

commit 10c739d16aa8edab212799d4dbb34b9baad4cebf
Author: Cyril Brulebois <kibi@debian.org>
Date:   Fri Feb 4 07:20:31 2011 +0100

    Add quilt build-dep for future use.

diff --git a/debian/changelog b/debian/changelog
index bb29daf..2f46556 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -11,6 +11,7 @@ xserver-xorg-video-suntcx (1:1.1.1-5) UNRELEASED; urgency=low
   * Wrap Depends/Provides.
   * Remove XS prefix from Vcs fields.
   * Bump Standards-Version to 3.9.1 (no changes needed).
+  * Add quilt build-dep for future use.
 
  -- Cyril Brulebois <kibi@debian.org>  Fri, 04 Feb 2011 07:08:36 +0100
 
diff --git a/debian/control b/debian/control
index 79e479a..852dc63 100644
--- a/debian/control
+++ b/debian/control
@@ -6,6 +6,7 @@ Uploaders: Jurij Smakov <jurij@debian.org>, Cyril Brulebois <kibi@debian.org>
 Build-Depends:
  debhelper (>= 8),
  dh-autoreconf,
+ quilt,
  xutils-dev,
  pkg-config,
  xserver-xorg-dev (>= 2:1.9.4),

commit 1e968162b019b94073f8d2ad50b8b3f3677b99d3
Author: Cyril Brulebois <kibi@debian.org>
Date:   Fri Feb 4 07:18:04 2011 +0100

    Bump Standards-Version to 3.9.1 (no changes needed).

diff --git a/debian/changelog b/debian/changelog
index 8aca519..bb29daf 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -10,6 +10,7 @@ xserver-xorg-video-suntcx (1:1.1.1-5) UNRELEASED; urgency=low
   * Remove long obsolete Replaces/Conflicts.
   * Wrap Depends/Provides.
   * Remove XS prefix from Vcs fields.
+  * Bump Standards-Version to 3.9.1 (no changes needed).
 
  -- Cyril Brulebois <kibi@debian.org>  Fri, 04 Feb 2011 07:08:36 +0100
 
diff --git a/debian/control b/debian/control
index a5a16a9..79e479a 100644
--- a/debian/control
+++ b/debian/control
@@ -13,7 +13,7 @@ Build-Depends:
  x11proto-randr-dev,
  x11proto-render-dev,
  x11proto-fonts-dev
-Standards-Version: 3.8.3
+Standards-Version: 3.9.1
 Vcs-Git: git://git.debian.org/git/pkg-xorg/driver/xserver-xorg-video-suntcx
 Vcs-Browser: http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-video-suntcx.git
 

commit 3a490fdfec08a5f805e8ea4c4c9f251eaf027535
Author: Cyril Brulebois <kibi@debian.org>
Date:   Fri Feb 4 07:17:51 2011 +0100

    Remove XS prefix from Vcs fields.

diff --git a/debian/changelog b/debian/changelog
index 55a0d08..8aca519 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -9,6 +9,7 @@ xserver-xorg-video-suntcx (1:1.1.1-5) UNRELEASED; urgency=low
   * Update Uploaders list. Thanks, David!
   * Remove long obsolete Replaces/Conflicts.
   * Wrap Depends/Provides.
+  * Remove XS prefix from Vcs fields.
 
  -- Cyril Brulebois <kibi@debian.org>  Fri, 04 Feb 2011 07:08:36 +0100
 
diff --git a/debian/control b/debian/control
index a4b5ab5..a5a16a9 100644
--- a/debian/control
+++ b/debian/control
@@ -14,8 +14,8 @@ Build-Depends:
  x11proto-render-dev,
  x11proto-fonts-dev
 Standards-Version: 3.8.3
-XS-Vcs-Git: git://git.debian.org/git/pkg-xorg/driver/xserver-xorg-video-suntcx
-XS-Vcs-Browser: http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-video-suntcx.git
+Vcs-Git: git://git.debian.org/git/pkg-xorg/driver/xserver-xorg-video-suntcx
+Vcs-Browser: http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-video-suntcx.git
 
 Package: xserver-xorg-video-suntcx
 Architecture: sparc

commit dd697811f4900c84a1c476cd540746909d62f9bd
Author: Cyril Brulebois <kibi@debian.org>
Date:   Fri Feb 4 07:17:33 2011 +0100

    Wrap Depends/Provides.

diff --git a/debian/changelog b/debian/changelog
index 10ad536..55a0d08 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -8,6 +8,7 @@ xserver-xorg-video-suntcx (1:1.1.1-5) UNRELEASED; urgency=low
   * Remove xsfbs accordingly.
   * Update Uploaders list. Thanks, David!
   * Remove long obsolete Replaces/Conflicts.
+  * Wrap Depends/Provides.
 
  -- Cyril Brulebois <kibi@debian.org>  Fri, 04 Feb 2011 07:08:36 +0100
 
diff --git a/debian/control b/debian/control
index 55dab76..a4b5ab5 100644
--- a/debian/control
+++ b/debian/control
@@ -19,8 +19,12 @@ XS-Vcs-Browser: http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-video-sunt
 
 Package: xserver-xorg-video-suntcx
 Architecture: sparc
-Depends: ${shlibs:Depends}, ${misc:Depends}, ${xviddriver:Depends}
-Provides: ${xviddriver:Provides}
+Depends:
+ ${shlibs:Depends},
+ ${misc:Depends},
+ ${xviddriver:Depends}
+Provides:
+ ${xviddriver:Provides}
 Description: X.Org X server -- Sun TCX display driver
  This package provides the driver for Sun TCX video devices.
  .

commit 847465247f65bde1c43882bcf10526c254d1dad6
Author: Cyril Brulebois <kibi@debian.org>
Date:   Fri Feb 4 07:13:51 2011 +0100

    Remove long obsolete Replaces/Conflicts.

diff --git a/debian/changelog b/debian/changelog
index e45a48b..10ad536 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -7,6 +7,7 @@ xserver-xorg-video-suntcx (1:1.1.1-5) UNRELEASED; urgency=low
       debhelper sequence.
   * Remove xsfbs accordingly.
   * Update Uploaders list. Thanks, David!
+  * Remove long obsolete Replaces/Conflicts.
 
  -- Cyril Brulebois <kibi@debian.org>  Fri, 04 Feb 2011 07:08:36 +0100
 
diff --git a/debian/control b/debian/control
index 32e6637..55dab76 100644
--- a/debian/control
+++ b/debian/control
@@ -21,8 +21,6 @@ Package: xserver-xorg-video-suntcx
 Architecture: sparc
 Depends: ${shlibs:Depends}, ${misc:Depends}, ${xviddriver:Depends}
 Provides: ${xviddriver:Provides}
-Replaces: xserver-xorg (<< 6.8.2-35), xserver-xorg-driver-suntcx
-Conflicts: xserver-xorg-driver-suntcx
 Description: X.Org X server -- Sun TCX display driver
  This package provides the driver for Sun TCX video devices.
  .

commit 30ba94ca4367f84953fc04074136dccb98308f1f
Author: Cyril Brulebois <kibi@debian.org>
Date:   Fri Feb 4 07:13:32 2011 +0100

    Update Uploaders list. Thanks, David!

diff --git a/debian/changelog b/debian/changelog
index 2abca3f..e45a48b 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -6,6 +6,7 @@ xserver-xorg-video-suntcx (1:1.1.1-5) UNRELEASED; urgency=low
     - Bump xserver-xorg-dev build-dep for dh_xsf_substvars and xsf
       debhelper sequence.
   * Remove xsfbs accordingly.
+  * Update Uploaders list. Thanks, David!
 
  -- Cyril Brulebois <kibi@debian.org>  Fri, 04 Feb 2011 07:08:36 +0100
 
diff --git a/debian/control b/debian/control
index b6b3c2c..32e6637 100644
--- a/debian/control
+++ b/debian/control
@@ -2,7 +2,7 @@ Source: xserver-xorg-video-suntcx
 Section: x11
 Priority: optional
 Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
-Uploaders: David Nusinow <dnusinow@debian.org>, Jurij Smakov <jurij@debian.org>, Cyril Brulebois <kibi@debian.org>
+Uploaders: Jurij Smakov <jurij@debian.org>, Cyril Brulebois <kibi@debian.org>
 Build-Depends:
  debhelper (>= 8),
  dh-autoreconf,

commit 92b55ebc4c64aadcb8762022ff514978482e6b9a
Author: Cyril Brulebois <kibi@debian.org>
Date:   Fri Feb 4 07:13:06 2011 +0100

    Remove xsfbs accordingly.

diff --git a/debian/README.source b/debian/README.source
index b09a1ab..4ecd5e6 100644
--- a/debian/README.source
+++ b/debian/README.source
@@ -47,27 +47,3 @@ are involved:
   case, it appears directly in the .diff.gz.
 * Otherwise, the patch is added to debian/patches/ which is managed
   with quilt as documented in /usr/share/doc/quilt/README.source.
-
-quilt is actually invoked by the Debian X packaging through a larger
-set of scripts called XSFBS. XSFBS brings some other X specific
-features such as managing dependencies and conflicts due to the video
-and input driver ABIs.
-XSFBS itself is maintained in a separate repository at
-  git://git.debian.org/pkg-xorg/xsfbs.git
-and it is pulled inside the other Debian X repositories when needed.
-
-The XSFBS patching system requires a build dependency on quilt. Also
-a dependency on $(STAMP_DIR)/patch has to be added to debian/rules
-so that the XSFBS patching occurs before the actual build. So the
-very first target of the build (likely the one running autoreconf)
-should depend on $(STAMP_DIR)/patch. It should also not depend on
-anything so that parallel builds are correctly supported (nothing
-should probably run while patching is being done). And finally, the
-clean target should depend on the xsfclean target so that patches
-are unapplied on clean.
-
-When the upstream sources contain some DFSG-nonfree files, they are
-listed in text files in debian/prune/ in the "debian-*" branch of
-the Debian repository. XSFBS' scripts then take care of removing
-these listed files during the build so as to generate a modified
-DFSG-free .orig.tar.gz tarball.
diff --git a/debian/changelog b/debian/changelog
index db82a8a..2abca3f 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -5,6 +5,7 @@ xserver-xorg-video-suntcx (1:1.1.1-5) UNRELEASED; urgency=low
     - Use dh-autoreconf.
     - Bump xserver-xorg-dev build-dep for dh_xsf_substvars and xsf
       debhelper sequence.
+  * Remove xsfbs accordingly.
 
  -- Cyril Brulebois <kibi@debian.org>  Fri, 04 Feb 2011 07:08:36 +0100
 
diff --git a/debian/xsfbs/repack.sh b/debian/xsfbs/repack.sh
deleted file mode 100755
index 5935cc9..0000000
--- a/debian/xsfbs/repack.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-set -e
-
-if ! [ -d debian/prune ]; then
-	exit 0
-fi
-
-if [ "x$1" != x--upstream-version ]; then
-	exit 1
-fi
-
-version="$2"
-filename="$3"
-
-if [ -z "$version" ] || ! [ -f "$filename" ]; then
-	exit 1
-fi
-
-dir="$(pwd)"
-tempdir="$(mktemp -d)"
-
-cd "$tempdir"
-tar xf "$dir/$filename"
-cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
-
-tar czf "$dir/$filename" *
-cd "$dir"
-rm -rf "$tempdir"
-echo "Done pruning upstream tarball"
-
-exit 0
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
deleted file mode 100755
index 3c59c20..0000000
--- a/debian/xsfbs/xsfbs.mk
+++ /dev/null
@@ -1,285 +0,0 @@
-#!/usr/bin/make -f
-
-# Debian X Strike Force Build System (XSFBS): Make portion
-
-# Copyright 1996 Stephen Early
-# Copyright 1997 Mark Eichin
-# Copyright 1998-2005, 2007 Branden Robinson
-# Copyright 2005 David Nusinow
-#
-# Licensed under the GNU General Public License, version 2.  See the file
-# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
-
-# Originally by Stephen Early <sde1000@debian.org>
-# Modified by Mark W. Eichin <eichin@kitten.gen.ma.us>
-# Modified by Adam Heath <doogie@debian.org>
-# Modified by Branden Robinson <branden@debian.org>
-# Modified by Fabio Massimo Di Nitto <fabbione@fabbione.net>
-# Modified by David Nusinow <dnusinow@debian.org>
-# Acknowledgements to Manoj Srivastava.
-
-# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
-export DH_OPTIONS
-
-# force quilt to not use ~/.quiltrc and to use debian/patches
-QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
-
-# Set up parameters for the upstream build environment.
-
-# Determine (source) package name from Debian changelog.
-SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
-                        | grep '^Source:' | awk '{print $$2}')
-
-# Determine package version from Debian changelog.
-SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
-                        | grep '^Version:' | awk '{print $$2}')
-
-# Determine upstream version number.
-UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
-
-# Determine the source version without the epoch for make-orig-tar-gz
-NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
-
-# Figure out who's building this package.
-BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
-
-# Find out if this is an official build; an official build has nothing but
-# digits, dots, and/or the codename of a release in the Debian part of the
-# version number.  Anything else indicates an unofficial build.
-OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
-
-# Set up parameters for the Debian build environment.
-
-# Determine our architecture.
-BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
-# Work around some old-time dpkg braindamage.
-BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
-# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
-ifdef DEB_HOST_ARCH
- ARCH:=$(DEB_HOST_ARCH)
-else
- # dpkg-cross sets the ARCH environment variable; if set, use it.
- ifdef ARCH
-  ARCH:=$(ARCH)
- else
-  ARCH:=$(BUILD_ARCH)
- endif
-endif
-
-# $(STAMP_DIR) houses stamp files for complex targets.
-STAMP_DIR:=stampdir
-
-# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
-# their files.
-DEBTREEDIR:=$(CURDIR)/debian/tmp
-
-# All "important" targets have four lines:
-#   1) A target name that is invoked by a package-building tool or the user.
-#      This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
-#   2) A line delcaring 1) as a phony target (".PHONY:").
-#   3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
-#   depend on other targets.
-#   4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
-#   "$(STAMP_DIR)/" prefix is omitted.
-#
-# This indirection is needed so that the "stamp" files that signify when a rule
-# is done can be located in a separate "stampdir".  Recall that make has no way
-# to know when a goal has been met for a phony target (like "build" or
-# "install").
-#
-# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
-# so that the target will not be run again.  Removing the file will make Make
-# run the target over.
-
-# All phony targets should be declared as dependencies of .PHONY, even if they
-# do not have "($STAMP_DIR)/"-prefixed counterparts.
-
-# Define a harmless default rule to keep things from going nuts by accident.
-.PHONY: default
-default:
-
-# Set up the $(STAMP_DIR) directory.
-.PHONY: stampdir
-stampdir_targets+=stampdir
-stampdir: $(STAMP_DIR)/stampdir
-$(STAMP_DIR)/stampdir:
-	mkdir $(STAMP_DIR)
-	>$@
-
-# Set up the package build directory as quilt expects to find it.
-.PHONY: prepare
-stampdir_targets+=prepare
-prepare: $(STAMP_DIR)/prepare
-$(STAMP_DIR)/prepare: $(STAMP_DIR)/logdir $(STAMP_DIR)/genscripts
-	>$@
-
-.PHONY: logdir
-stampdir_targets+=logdir
-logdir: $(STAMP_DIR)/logdir
-$(STAMP_DIR)/logdir: $(STAMP_DIR)/stampdir
-	mkdir -p $(STAMP_DIR)/log
-	>$@
-
-# Apply all patches to the upstream source.
-.PHONY: patch
-stampdir_targets+=patch
-patch: $(STAMP_DIR)/patch
-$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
-	if ! [ `which quilt` ]; then \
-		echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
-		exit 1; \
-	fi; \
-	if $(QUILT) next >/dev/null 2>&1; then \
-	  echo -n "Applying patches..."; \
-	  if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
-	    cat $(STAMP_DIR)/log/patch; \
-	    echo "successful."; \
-	  else \
-	    cat $(STAMP_DIR)/log/patch; \
-	    echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
-	    exit 1; \
-	  fi; \
-	else \
-	  echo "No patches to apply"; \
-	fi; \
-	>$@
-
-# Revert all patches to the upstream source.
-.PHONY: unpatch
-unpatch: $(STAMP_DIR)/logdir
-	rm -f $(STAMP_DIR)/patch
-	@echo -n "Unapplying patches..."; \
-	if $(QUILT) applied >/dev/null 2>/dev/null; then \
-	  if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
-	    cat $(STAMP_DIR)/log/unpatch; \
-	    echo "successful."; \
-	  else \
-	    cat $(STAMP_DIR)/log/unpatch; \
-	    echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
-	    exit 1; \
-	  fi; \
-	else \
-	  echo "nothing to do."; \
-	fi
-
-# Clean the generated maintainer scripts.
-.PHONY: cleanscripts
-cleanscripts:
-	rm -f $(STAMP_DIR)/genscripts
-	rm -f debian/*.config \
-	      debian/*.postinst \
-	      debian/*.postrm \
-	      debian/*.preinst \
-	      debian/*.prerm
-
-# Clean the package build tree.
-.PHONY: xsfclean
-xsfclean: cleanscripts unpatch
-	dh_testdir
-	rm -rf .pc
-	rm -rf $(STAMP_DIR)
-	dh_clean
-
-# Remove files from the upstream source tree that we don't need, or which have
-# licensing problems.  It must be run before creating the .orig.tar.gz.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: prune-upstream-tree
-prune-upstream-tree:
-	# Ensure we're in the correct directory.
-	dh_testdir
-	grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
-
-# Verify that there are no offsets or fuzz in the patches we apply.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: patch-audit
-patch-audit: prepare unpatch
-	@echo -n "Auditing patches..."; \
-	>$(STAMP_DIR)/log/patch; \
-	FUZZY=; \
-	while [ -n "$$($(QUILT) next)" ]; do \
-	  RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
-	  case "$$RESULT" in \
-	    succeeded) \
-	      echo "fuzzy patch: $$($(QUILT) top)" \
-	        | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
-	      FUZZY=yes; \
-	      ;; \
-	    FAILED) \
-	      echo "broken patch: $$($(QUILT) next)" \
-	        | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
-	      exit 1; \
-	      ;; \
-	  esac; \
-	done; \
-	if [ -n "$$FUZZY" ]; then \
-	  echo "there were fuzzy patches; please fix."; \
-	  exit 1; \
-	else \
-	  echo "done."; \
-	fi
-
-# Generate the maintainer scripts.
-.PHONY: genscripts
-stampdir_targets+=genscripts
-genscripts: $(STAMP_DIR)/genscripts
-$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
-	for FILE in debian/*.config.in \
-	            debian/*.postinst.in \
-	            debian/*.postrm.in \
-	            debian/*.preinst.in \
-	            debian/*.prerm.in; do \
-	  if [ -e "$$FILE" ]; then \
-	    MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
-	    sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
-	      | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
-	    cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
-	    sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
-	      | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
-	    sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
-	        -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
-	      <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
-	    rm $$MAINTSCRIPT.tmp; \
-	  fi; \
-	done
-	# Validate syntax of generated shell scripts.
-	#sh debian/scripts/validate-posix-sh debian/*.config \
-	#                                    debian/*.postinst \
-	#                                    debian/*.postrm \
-	#                                    debian/*.preinst \
-	#                                    debian/*.prerm
-	>$@
-
-# Compute dependencies for drivers
-#
-VIDEODEP = $(shell cat /usr/share/xserver-xorg/videodrvdep 2>/dev/null)
-INPUTDEP = $(shell cat /usr/share/xserver-xorg/xinputdep 2>/dev/null)
-
-# these two can be removed post-squeeze
-VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
-INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
-VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI), xorg-driver-video
-INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI), xorg-driver-input
-
-ifeq ($(PACKAGE),)
-PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
-endif
-
-.PHONY: serverabi
-serverabi: install
-ifeq ($(VIDEODEP),)
-	@echo 'error: xserver-xorg-dev >= 1.7.6.901 needs to be installed'
-	@exit 1
-else
-	echo "xviddriver:Depends=$(VIDEODEP)" >> debian/$(PACKAGE).substvars
-	echo "xinpdriver:Depends=$(INPUTDEP)" >> debian/$(PACKAGE).substvars
-	# the following is there for compatibility...
-	echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
-	echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
-	echo "xserver:Depends=$(VIDEODEP), $(INPUTDEP)" >> debian/$(PACKAGE).substvars
-endif
-
-# vim:set noet ai sts=8 sw=8 tw=0:
diff --git a/debian/xsfbs/xsfbs.sh b/debian/xsfbs/xsfbs.sh
deleted file mode 100644
index 813fd8d..0000000
--- a/debian/xsfbs/xsfbs.sh
+++ /dev/null
@@ -1,622 +0,0 @@
-# This is the X Strike Force shell library for X Window System package
-# maintainer scripts.  It serves to define shell functions commonly used by
-# such packages, and performs some error checking necessary for proper operation
-# of those functions.  By itself, it does not "do" much; the maintainer scripts
-# invoke the functions defined here to accomplish package installation and
-# removal tasks.
-
-# If you are reading this within a Debian package maintainer script (e.g.,
-# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
-# skip past this library by scanning forward in this file to the string
-# "GOBSTOPPER".
-
-SOURCE_VERSION=@SOURCE_VERSION@
-OFFICIAL_BUILD=@OFFICIAL_BUILD@
-
-# Use special abnormal exit codes so that problems with this library are more
-# easily tracked down.
-SHELL_LIB_INTERNAL_ERROR=86
-SHELL_LIB_THROWN_ERROR=74
-SHELL_LIB_USAGE_ERROR=99
-
-# old -> new variable names
-if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
-  DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
-fi
-if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
-  DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
-fi
-
-# initial sanity checks
-if [ -z "$THIS_PACKAGE" ]; then
-  cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_PACKAGE shell variable.  Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of this package.
-EOF
-  exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ -z "$THIS_SCRIPT" ]; then
-  cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_SCRIPT shell variable.  Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of the
-"$THIS_PACKAGE" package.
-EOF
-  exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
-  RECONFIGURE="true"
-else
-  RECONFIGURE=
-fi
-
-if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
-  FIRSTINST="yes"
-fi
-
-if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
-  UPGRADE="yes"
-fi
-
-trap "message;\
-      message \"Received signal.  Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
-      message;\
-      exit 1" HUP INT QUIT TERM
-
-reject_nondigits () {
-  # syntax: reject_nondigits [ operand ... ]
-  #
-  # scan operands (typically shell variables whose values cannot be trusted) for
-  # characters other than decimal digits and barf if any are found
-  while [ -n "$1" ]; do
-    # does the operand contain anything but digits?
-    if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
-      # can't use die(), because it wraps message() which wraps this function
-      echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
-           "possibly malicious garbage \"$1\"" >&2
-      exit $SHELL_LIB_THROWN_ERROR
-    fi
-    shift
-  done
-}
-
-reject_unlikely_path_chars () {
-  # syntax: reject_unlikely_path_chars [ operand ... ]
-  #
-  # scan operands (typically shell variables whose values cannot be trusted) for
-  # characters unlikely to be seen in a path and which the shell might
-  # interpret and barf if any are found
-  while [ -n "$1" ]; do
-    # does the operand contain any funny characters?
-    if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
-      # can't use die(), because I want to avoid forward references
-      echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
-           "encountered possibly malicious garbage \"$1\"" >&2
-      exit $SHELL_LIB_THROWN_ERROR
-    fi
-    shift
-  done
-}
-
-# Query the terminal to establish a default number of columns to use for
-# displaying messages to the user.  This is used only as a fallback in the
-# event the COLUMNS variable is not set.  ($COLUMNS can react to SIGWINCH while
-# the script is running, and this cannot, only being calculated once.)
-DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
-if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
-  DEFCOLUMNS=80
-fi
-
-message () {
-  # pretty-print messages of arbitrary length
-  reject_nondigits "$COLUMNS"
-  echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
-}
-
-observe () {
-  # syntax: observe message ...
-  #
-  # issue observational message suitable for logging someday when support for
-  # it exists in dpkg
-  if [ -n "$DEBUG_XORG_PACKAGE" ]; then
-    message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
-  fi
-}
-
-warn () {
-  # syntax: warn message ...
-  #
-  # issue warning message suitable for logging someday when support for
-  # it exists in dpkg; also send to standard error
-  message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
-}
-
-die () {
-  # syntax: die message ...
-  #
-  # exit script with error message
-  message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
-  exit $SHELL_LIB_THROWN_ERROR
-}
-
-internal_error () {
-  # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
-  message "internal error: $*"
-  if [ -n "$OFFICIAL_BUILD" ]; then
-    message "Please report a bug in the $THIS_SCRIPT script of the" \
-            "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
-            "Tracking System.  Include all messages above that mention the" \
-            "$THIS_PACKAGE package.  Visit " \
-            "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
-            "instructions, read the file" \
-            "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
-            "package, or install the reportbug package and use the command of" \
-            "the same name to file a report."
-  fi
-  exit $SHELL_LIB_INTERNAL_ERROR
-}
-
-usage_error () {
-  message "usage error: $*"
-  message "Please report a bug in the $THIS_SCRIPT script of the" \
-          "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
-          "Tracking System.  Include all messages above that mention the" \
-          "$THIS_PACKAGE package.  Visit " \
-          "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
-          "instructions, read the file" \
-          "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
-          "package, or install the reportbug package and use the command of" \
-          "the same name to file a report."
-  exit $SHELL_LIB_USAGE_ERROR
-}
-
-font_update () {
-  # run $UPDATECMDS in $FONTDIRS
-
-  local dir cmd shortcmd x_font_dir_prefix
-
-  x_font_dir_prefix="/usr/share/fonts/X11"
-
-  if [ -z "$UPDATECMDS" ]; then
-    usage_error "font_update() called but \$UPDATECMDS not set"
-  fi
-  if [ -z "$FONTDIRS" ]; then
-    usage_error "font_update() called but \$FONTDIRS not set"
-  fi
-
-  reject_unlikely_path_chars "$UPDATECMDS"
-  reject_unlikely_path_chars "$FONTDIRS"
-
-  for dir in $FONTDIRS; do
-    if [ -d "$x_font_dir_prefix/$dir" ]; then
-      for cmd in $UPDATECMDS; do
-        if which "$cmd" > /dev/null 2>&1; then
-          shortcmd=${cmd##*/}
-          observe "running $shortcmd in $dir font directory"
-	  cmd_opts=
-          if [ "$shortcmd" = "update-fonts-alias" ]; then
-            cmd_opts=--x11r7-layout
-          fi
-          if [ "$shortcmd" = "update-fonts-dir" ]; then
-            cmd_opts=--x11r7-layout
-          fi
-          if [ "$shortcmd" = "update-fonts-scale" ]; then
-            cmd_opts=--x11r7-layout
-          fi
-          $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
-                              "failed; font directory data may not" \
-                              "be up to date"
-        else
-          warn "$cmd not found; not updating corresponding $dir font" \
-               "directory data"
-        fi
-      done
-    else
-      warn "$dir is not a directory; not updating font directory data"
-    fi
-  done
-}
-
-remove_conffile_prepare () {
-  # syntax: remove_conffile_prepare filename official_md5sum ...
-  #
-  # Check a conffile "filename" against a list of canonical MD5 checksums.
-  # If the file's current MD5 checksum matches one of the "official_md5sum"
-  # operands provided, then prepare the conffile for removal from the system.
-  # We defer actual deletion until the package is configured so that we can
-  # roll this operation back if package installation fails.
-  #
-  # Call this function from a preinst script in the event $1 is "upgrade" or
-  # "install" and verify $2 to ensure the package is being upgraded from a
-  # version (or installed over a version removed-but-not-purged) prior to the
-  # one in which the conffile was obsoleted.
-
-  local conffile current_checksum
-
-  # validate arguments
-  if [ $# -lt 2 ]; then
-    usage_error "remove_conffile_prepare() called with wrong number of" \
-                "arguments; expected at least 2, got $#"
-    exit $SHELL_LIB_USAGE_ERROR
-  fi
-
-  conffile="$1"
-  shift
-
-  # does the conffile even exist?
-  if [ -e "$conffile" ]; then
-    # calculate its checksum
-    current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
-    # compare it to each supplied checksum
-    while [ -n "$1" ]; do
-      if [ "$current_checksum" = "$1" ]; then
-        # we found a match; move the confffile and stop looking
-        observe "preparing obsolete conffile $conffile for removal"
-        mv "$conffile" "$conffile.$THIS_PACKAGE-tmp"
-        break
-      fi
-      shift
-    done
-  fi
-}
-
-remove_conffile_lookup () {
-  # syntax: remove_conffile_lookup package filename
-  #
-  # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal
-  # if it matches the actual file's md5sum.
-  #
-  # Call this function when you would call remove_conffile_prepare but only
-  # want to check against dpkg's status database instead of known checksums.
-
-  local package conffile old_md5sum
-
-  # validate arguments
-  if [ $# -ne 2 ]; then
-    usage_error "remove_conffile_lookup() called with wrong number of" \
-                "arguments; expected 1, got $#"
-    exit $SHELL_LIB_USAGE_ERROR
-  fi
-
-  package="$1"
-  conffile="$2"
-
-  if ! [ -e "$conffile" ]; then
-    return
-  fi
-  old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \
-    awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')"
-  if [ -n "$old_md5sum" ]; then
-    remove_conffile_prepare "$conffile" "$old_md5sum"
-  fi
-}
-
-remove_conffile_commit () {
-  # syntax: remove_conffile_commit filename
-  #
-  # Complete the removal of a conffile "filename" that has become obsolete.
-  #
-  # Call this function from a postinst script after having used
-  # remove_conffile_prepare() in the preinst.
-
-  local conffile
-
-  # validate arguments
-  if [ $# -ne 1 ]; then
-    usage_error "remove_conffile_commit() called with wrong number of" \
-                "arguments; expected 1, got $#"
-    exit $SHELL_LIB_USAGE_ERROR
-  fi
-
-  conffile="$1"
-
-  # if the temporary file created by remove_conffile_prepare() exists, remove it
-  if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
-    observe "committing removal of obsolete conffile $conffile"
-    rm "$conffile.$THIS_PACKAGE-tmp"
-  fi
-}
-
-remove_conffile_rollback () {
-  # syntax: remove_conffile_rollback filename
-  #
-  # Roll back the removal of a conffile "filename".
-  #
-  # Call this function from a postrm script in the event $1 is "abort-upgrade"
-  # or "abort-install" is  after having used remove_conffile_prepare() in the
-  # preinst.
-
-  local conffile
-
-  # validate arguments
-  if [ $# -ne 1 ]; then
-    usage_error "remove_conffile_rollback() called with wrong number of" \
-                "arguments; expected 1, got $#"
-    exit $SHELL_LIB_USAGE_ERROR
-  fi
-
-  conffile="$1"
-
-  # if the temporary file created by remove_conffile_prepare() exists, move it
-  # back
-  if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
-    observe "rolling back removal of obsolete conffile $conffile"
-    mv "$conffile.$THIS_PACKAGE-tmp" "$conffile"
-  fi
-}
-
-replace_conffile_with_symlink_prepare () {
-  # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
-  # official_md5sum ...
-  #
-  # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
-  # If the file's current MD5 checksum matches one of the "official_md5sum"


Reply to: