xserver-xorg-video-s3: Changes to 'debian-unstable'
debian/README.source | 24 -
debian/changelog | 23 +
debian/compat | 2
debian/control | 23 -
debian/patches/series | 1
debian/rules | 103 --------
debian/xsfbs/repack.sh | 32 --
debian/xsfbs/xsfbs.mk | 285 ----------------------
debian/xsfbs/xsfbs.sh | 622 -------------------------------------------------
9 files changed, 48 insertions(+), 1067 deletions(-)
New commits:
commit 8005c067cf12f5274ed93ab2e56770c6d84c7bed
Author: Cyril Brulebois <kibi@debian.org>
Date: Sat Feb 5 14:54:24 2011 +0100
Upload to unstable
diff --git a/debian/changelog b/debian/changelog
index 725d5fa..21c41d0 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,4 +1,4 @@
-xserver-xorg-video-s3 (1:0.6.3-4) UNRELEASED; urgency=low
+xserver-xorg-video-s3 (1:0.6.3-4) unstable; urgency=low
* Switch to dh:
- Use debhelper 8.
@@ -12,7 +12,7 @@ xserver-xorg-video-s3 (1:0.6.3-4) UNRELEASED; urgency=low
* Bump Standards-Version to 3.9.1 (no changes needed).
* Add quilt build-dep for future use.
- -- Cyril Brulebois <kibi@debian.org> Fri, 04 Feb 2011 05:08:00 +0100
+ -- Cyril Brulebois <kibi@debian.org> Sat, 05 Feb 2011 14:54:24 +0100
xserver-xorg-video-s3 (1:0.6.3-3) experimental; urgency=low
commit 25b02da3886376662bf22f54a47fdd6f27277d41
Author: Cyril Brulebois <kibi@debian.org>
Date: Sat Feb 5 09:32:19 2011 +0100
Add a placeholding series file.
diff --git a/debian/patches/series b/debian/patches/series
new file mode 100644
index 0000000..fdffa2a
--- /dev/null
+++ b/debian/patches/series
@@ -0,0 +1 @@
+# placeholder
commit 1ad1fd9393cdf18f31816a29f283a16b3cfbef39
Author: Cyril Brulebois <kibi@debian.org>
Date: Fri Feb 4 11:46:35 2011 +0100
Add quilt build-dep for future use.
diff --git a/debian/changelog b/debian/changelog
index 6f534d9..725d5fa 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -10,6 +10,7 @@ xserver-xorg-video-s3 (1:0.6.3-4) UNRELEASED; urgency=low
* Remove long obsolete Replaces/Conflicts.
* Wrap Depends/Provides.
* Bump Standards-Version to 3.9.1 (no changes needed).
+ * Add quilt build-dep for future use.
-- Cyril Brulebois <kibi@debian.org> Fri, 04 Feb 2011 05:08:00 +0100
diff --git a/debian/control b/debian/control
index 6d2dcdb..6723682 100644
--- a/debian/control
+++ b/debian/control
@@ -6,6 +6,7 @@ Uploaders: Cyril Brulebois <kibi@debian.org>
Build-Depends:
debhelper (>= 8),
dh-autoreconf,
+ quilt,
pkg-config,
xserver-xorg-dev (>= 2:1.9.4),
x11proto-video-dev,
commit ab399329d2b0b2aad0139f2d41a67b3a9482a6d9
Author: Cyril Brulebois <kibi@debian.org>
Date: Fri Feb 4 05:11:09 2011 +0100
Bump Standards-Version to 3.9.1 (no changes needed).
diff --git a/debian/changelog b/debian/changelog
index d2931c2..6f534d9 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -9,6 +9,7 @@ xserver-xorg-video-s3 (1:0.6.3-4) UNRELEASED; urgency=low
* Update Uploaders list. Thanks, David & Brice!
* Remove long obsolete Replaces/Conflicts.
* Wrap Depends/Provides.
+ * Bump Standards-Version to 3.9.1 (no changes needed).
-- Cyril Brulebois <kibi@debian.org> Fri, 04 Feb 2011 05:08:00 +0100
diff --git a/debian/control b/debian/control
index 52bbae8..6d2dcdb 100644
--- a/debian/control
+++ b/debian/control
@@ -15,7 +15,7 @@ Build-Depends:
x11proto-render-dev,
x11proto-xext-dev,
xutils-dev
-Standards-Version: 3.8.3
+Standards-Version: 3.9.1
Vcs-Git: git://git.debian.org/git/pkg-xorg/driver/xserver-xorg-video-s3
Vcs-Browser: http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-video-s3.git
commit 0e54505e3070c7fc110b4720618ee57588e9fe94
Author: Cyril Brulebois <kibi@debian.org>
Date: Fri Feb 4 05:10:35 2011 +0100
Wrap Depends/Provides.
diff --git a/debian/changelog b/debian/changelog
index 1042fa6..d2931c2 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -8,6 +8,7 @@ xserver-xorg-video-s3 (1:0.6.3-4) UNRELEASED; urgency=low
* Remove xsfbs accordingly.
* Update Uploaders list. Thanks, David & Brice!
* Remove long obsolete Replaces/Conflicts.
+ * Wrap Depends/Provides.
-- Cyril Brulebois <kibi@debian.org> Fri, 04 Feb 2011 05:08:00 +0100
diff --git a/debian/control b/debian/control
index 34ea764..52bbae8 100644
--- a/debian/control
+++ b/debian/control
@@ -21,8 +21,12 @@ Vcs-Browser: http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-video-s3.git
Package: xserver-xorg-video-s3
Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}, ${xviddriver:Depends}
-Provides: ${xviddriver:Provides}
+Depends:
+ ${shlibs:Depends},
+ ${misc:Depends},
+ ${xviddriver:Depends},
+Provides:
+ ${xviddriver:Provides}
Description: X.Org X server -- legacy S3 display driver
This package provides the driver for certain legacy S3 video card chipsets,
including the Trio64 and 96x cards. It does not provide support for
commit 13ae9960baf95b0f776881ea5da6673cab1cbc77
Author: Cyril Brulebois <kibi@debian.org>
Date: Fri Feb 4 05:10:17 2011 +0100
Remove long obsolete Replaces/Conflicts.
diff --git a/debian/changelog b/debian/changelog
index 750b181..1042fa6 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -7,6 +7,7 @@ xserver-xorg-video-s3 (1:0.6.3-4) UNRELEASED; urgency=low
debhelper sequence.
* Remove xsfbs accordingly.
* Update Uploaders list. Thanks, David & Brice!
+ * Remove long obsolete Replaces/Conflicts.
-- Cyril Brulebois <kibi@debian.org> Fri, 04 Feb 2011 05:08:00 +0100
diff --git a/debian/control b/debian/control
index 9139004..34ea764 100644
--- a/debian/control
+++ b/debian/control
@@ -23,8 +23,6 @@ Package: xserver-xorg-video-s3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}, ${xviddriver:Depends}
Provides: ${xviddriver:Provides}
-Replaces: xserver-xorg (<< 6.8.2-35), xserver-xorg-driver-s3
-Conflicts: xserver-xorg-driver-s3
Description: X.Org X server -- legacy S3 display driver
This package provides the driver for certain legacy S3 video card chipsets,
including the Trio64 and 96x cards. It does not provide support for
commit 619b15729fe625710c73d3e620f55e9ce7531f33
Author: Cyril Brulebois <kibi@debian.org>
Date: Fri Feb 4 05:10:00 2011 +0100
Update Uploaders list. Thanks, David & Brice!
diff --git a/debian/changelog b/debian/changelog
index 8520fd7..750b181 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -6,6 +6,7 @@ xserver-xorg-video-s3 (1:0.6.3-4) UNRELEASED; urgency=low
- Bump xserver-xorg-dev build-dep for dh_xsf_substvars and xsf
debhelper sequence.
* Remove xsfbs accordingly.
+ * Update Uploaders list. Thanks, David & Brice!
-- Cyril Brulebois <kibi@debian.org> Fri, 04 Feb 2011 05:08:00 +0100
diff --git a/debian/control b/debian/control
index 03cc3a5..9139004 100644
--- a/debian/control
+++ b/debian/control
@@ -2,7 +2,7 @@ Source: xserver-xorg-video-s3
Section: x11
Priority: optional
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
-Uploaders: David Nusinow <dnusinow@debian.org>, Brice Goglin <bgoglin@debian.org>, Cyril Brulebois <kibi@debian.org>
+Uploaders: Cyril Brulebois <kibi@debian.org>
Build-Depends:
debhelper (>= 8),
dh-autoreconf,
commit b9b2b9b4df810f1d9317b3294af082e05cd98703
Author: Cyril Brulebois <kibi@debian.org>
Date: Fri Feb 4 05:09:45 2011 +0100
Remove xsfbs accordingly.
diff --git a/debian/README.source b/debian/README.source
index b09a1ab..4ecd5e6 100644
--- a/debian/README.source
+++ b/debian/README.source
@@ -47,27 +47,3 @@ are involved:
case, it appears directly in the .diff.gz.
* Otherwise, the patch is added to debian/patches/ which is managed
with quilt as documented in /usr/share/doc/quilt/README.source.
-
-quilt is actually invoked by the Debian X packaging through a larger
-set of scripts called XSFBS. XSFBS brings some other X specific
-features such as managing dependencies and conflicts due to the video
-and input driver ABIs.
-XSFBS itself is maintained in a separate repository at
- git://git.debian.org/pkg-xorg/xsfbs.git
-and it is pulled inside the other Debian X repositories when needed.
-
-The XSFBS patching system requires a build dependency on quilt. Also
-a dependency on $(STAMP_DIR)/patch has to be added to debian/rules
-so that the XSFBS patching occurs before the actual build. So the
-very first target of the build (likely the one running autoreconf)
-should depend on $(STAMP_DIR)/patch. It should also not depend on
-anything so that parallel builds are correctly supported (nothing
-should probably run while patching is being done). And finally, the
-clean target should depend on the xsfclean target so that patches
-are unapplied on clean.
-
-When the upstream sources contain some DFSG-nonfree files, they are
-listed in text files in debian/prune/ in the "debian-*" branch of
-the Debian repository. XSFBS' scripts then take care of removing
-these listed files during the build so as to generate a modified
-DFSG-free .orig.tar.gz tarball.
diff --git a/debian/changelog b/debian/changelog
index eace373..8520fd7 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -5,6 +5,7 @@ xserver-xorg-video-s3 (1:0.6.3-4) UNRELEASED; urgency=low
- Use dh-autoreconf.
- Bump xserver-xorg-dev build-dep for dh_xsf_substvars and xsf
debhelper sequence.
+ * Remove xsfbs accordingly.
-- Cyril Brulebois <kibi@debian.org> Fri, 04 Feb 2011 05:08:00 +0100
diff --git a/debian/xsfbs/repack.sh b/debian/xsfbs/repack.sh
deleted file mode 100755
index 5935cc9..0000000
--- a/debian/xsfbs/repack.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-set -e
-
-if ! [ -d debian/prune ]; then
- exit 0
-fi
-
-if [ "x$1" != x--upstream-version ]; then
- exit 1
-fi
-
-version="$2"
-filename="$3"
-
-if [ -z "$version" ] || ! [ -f "$filename" ]; then
- exit 1
-fi
-
-dir="$(pwd)"
-tempdir="$(mktemp -d)"
-
-cd "$tempdir"
-tar xf "$dir/$filename"
-cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
-
-tar czf "$dir/$filename" *
-cd "$dir"
-rm -rf "$tempdir"
-echo "Done pruning upstream tarball"
-
-exit 0
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
deleted file mode 100755
index 3c59c20..0000000
--- a/debian/xsfbs/xsfbs.mk
+++ /dev/null
@@ -1,285 +0,0 @@
-#!/usr/bin/make -f
-
-# Debian X Strike Force Build System (XSFBS): Make portion
-
-# Copyright 1996 Stephen Early
-# Copyright 1997 Mark Eichin
-# Copyright 1998-2005, 2007 Branden Robinson
-# Copyright 2005 David Nusinow
-#
-# Licensed under the GNU General Public License, version 2. See the file
-# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
-
-# Originally by Stephen Early <sde1000@debian.org>
-# Modified by Mark W. Eichin <eichin@kitten.gen.ma.us>
-# Modified by Adam Heath <doogie@debian.org>
-# Modified by Branden Robinson <branden@debian.org>
-# Modified by Fabio Massimo Di Nitto <fabbione@fabbione.net>
-# Modified by David Nusinow <dnusinow@debian.org>
-# Acknowledgements to Manoj Srivastava.
-
-# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
-export DH_OPTIONS
-
-# force quilt to not use ~/.quiltrc and to use debian/patches
-QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
-
-# Set up parameters for the upstream build environment.
-
-# Determine (source) package name from Debian changelog.
-SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Source:' | awk '{print $$2}')
-
-# Determine package version from Debian changelog.
-SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
- | grep '^Version:' | awk '{print $$2}')
-
-# Determine upstream version number.
-UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
-
-# Determine the source version without the epoch for make-orig-tar-gz
-NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
-
-# Figure out who's building this package.
-BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
-
-# Find out if this is an official build; an official build has nothing but
-# digits, dots, and/or the codename of a release in the Debian part of the
-# version number. Anything else indicates an unofficial build.
-OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
-
-# Set up parameters for the Debian build environment.
-
-# Determine our architecture.
-BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
-# Work around some old-time dpkg braindamage.
-BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
-# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
-ifdef DEB_HOST_ARCH
- ARCH:=$(DEB_HOST_ARCH)
-else
- # dpkg-cross sets the ARCH environment variable; if set, use it.
- ifdef ARCH
- ARCH:=$(ARCH)
- else
- ARCH:=$(BUILD_ARCH)
- endif
-endif
-
-# $(STAMP_DIR) houses stamp files for complex targets.
-STAMP_DIR:=stampdir
-
-# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
-# their files.
-DEBTREEDIR:=$(CURDIR)/debian/tmp
-
-# All "important" targets have four lines:
-# 1) A target name that is invoked by a package-building tool or the user.
-# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
-# 2) A line delcaring 1) as a phony target (".PHONY:").
-# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
-# depend on other targets.
-# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
-# "$(STAMP_DIR)/" prefix is omitted.
-#
-# This indirection is needed so that the "stamp" files that signify when a rule
-# is done can be located in a separate "stampdir". Recall that make has no way
-# to know when a goal has been met for a phony target (like "build" or
-# "install").
-#
-# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
-# so that the target will not be run again. Removing the file will make Make
-# run the target over.
-
-# All phony targets should be declared as dependencies of .PHONY, even if they
-# do not have "($STAMP_DIR)/"-prefixed counterparts.
-
-# Define a harmless default rule to keep things from going nuts by accident.
-.PHONY: default
-default:
-
-# Set up the $(STAMP_DIR) directory.
-.PHONY: stampdir
-stampdir_targets+=stampdir
-stampdir: $(STAMP_DIR)/stampdir
-$(STAMP_DIR)/stampdir:
- mkdir $(STAMP_DIR)
- >$@
-
-# Set up the package build directory as quilt expects to find it.
-.PHONY: prepare
-stampdir_targets+=prepare
-prepare: $(STAMP_DIR)/prepare
-$(STAMP_DIR)/prepare: $(STAMP_DIR)/logdir $(STAMP_DIR)/genscripts
- >$@
-
-.PHONY: logdir
-stampdir_targets+=logdir
-logdir: $(STAMP_DIR)/logdir
-$(STAMP_DIR)/logdir: $(STAMP_DIR)/stampdir
- mkdir -p $(STAMP_DIR)/log
- >$@
-
-# Apply all patches to the upstream source.
-.PHONY: patch
-stampdir_targets+=patch
-patch: $(STAMP_DIR)/patch
-$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
- if ! [ `which quilt` ]; then \
- echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
- exit 1; \
- fi; \
- if $(QUILT) next >/dev/null 2>&1; then \
- echo -n "Applying patches..."; \
- if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
- cat $(STAMP_DIR)/log/patch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/patch; \
- echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "No patches to apply"; \
- fi; \
- >$@
-
-# Revert all patches to the upstream source.
-.PHONY: unpatch
-unpatch: $(STAMP_DIR)/logdir
- rm -f $(STAMP_DIR)/patch
- @echo -n "Unapplying patches..."; \
- if $(QUILT) applied >/dev/null 2>/dev/null; then \
- if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "successful."; \
- else \
- cat $(STAMP_DIR)/log/unpatch; \
- echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
- exit 1; \
- fi; \
- else \
- echo "nothing to do."; \
- fi
-
-# Clean the generated maintainer scripts.
-.PHONY: cleanscripts
-cleanscripts:
- rm -f $(STAMP_DIR)/genscripts
- rm -f debian/*.config \
- debian/*.postinst \
- debian/*.postrm \
- debian/*.preinst \
- debian/*.prerm
-
-# Clean the package build tree.
-.PHONY: xsfclean
-xsfclean: cleanscripts unpatch
- dh_testdir
- rm -rf .pc
- rm -rf $(STAMP_DIR)
- dh_clean
-
-# Remove files from the upstream source tree that we don't need, or which have
-# licensing problems. It must be run before creating the .orig.tar.gz.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: prune-upstream-tree
-prune-upstream-tree:
- # Ensure we're in the correct directory.
- dh_testdir
- grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
-
-# Verify that there are no offsets or fuzz in the patches we apply.
-#
-# Note: This rule is for Debian package maintainers' convenience, and is not
-# needed for conventional build scenarios.
-.PHONY: patch-audit
-patch-audit: prepare unpatch
- @echo -n "Auditing patches..."; \
- >$(STAMP_DIR)/log/patch; \
- FUZZY=; \
- while [ -n "$$($(QUILT) next)" ]; do \
- RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
- case "$$RESULT" in \
- succeeded) \
- echo "fuzzy patch: $$($(QUILT) top)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
- FUZZY=yes; \
- ;; \
- FAILED) \
- echo "broken patch: $$($(QUILT) next)" \
- | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
- exit 1; \
- ;; \
- esac; \
- done; \
- if [ -n "$$FUZZY" ]; then \
- echo "there were fuzzy patches; please fix."; \
- exit 1; \
- else \
- echo "done."; \
- fi
-
-# Generate the maintainer scripts.
-.PHONY: genscripts
-stampdir_targets+=genscripts
-genscripts: $(STAMP_DIR)/genscripts
-$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
- for FILE in debian/*.config.in \
- debian/*.postinst.in \
- debian/*.postrm.in \
- debian/*.preinst.in \
- debian/*.prerm.in; do \
- if [ -e "$$FILE" ]; then \
- MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
- sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
- cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
- sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
- | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
- sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
- -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
- <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
- rm $$MAINTSCRIPT.tmp; \
- fi; \
- done
- # Validate syntax of generated shell scripts.
- #sh debian/scripts/validate-posix-sh debian/*.config \
- # debian/*.postinst \
- # debian/*.postrm \
- # debian/*.preinst \
- # debian/*.prerm
- >$@
-
-# Compute dependencies for drivers
-#
-VIDEODEP = $(shell cat /usr/share/xserver-xorg/videodrvdep 2>/dev/null)
-INPUTDEP = $(shell cat /usr/share/xserver-xorg/xinputdep 2>/dev/null)
-
-# these two can be removed post-squeeze
-VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
-INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
-VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI), xorg-driver-video
-INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI), xorg-driver-input
-
-ifeq ($(PACKAGE),)
-PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
-endif
-
-.PHONY: serverabi
-serverabi: install
-ifeq ($(VIDEODEP),)
- @echo 'error: xserver-xorg-dev >= 1.7.6.901 needs to be installed'
- @exit 1
-else
- echo "xviddriver:Depends=$(VIDEODEP)" >> debian/$(PACKAGE).substvars
- echo "xinpdriver:Depends=$(INPUTDEP)" >> debian/$(PACKAGE).substvars
- # the following is there for compatibility...
- echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
- echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
- echo "xserver:Depends=$(VIDEODEP), $(INPUTDEP)" >> debian/$(PACKAGE).substvars
-endif
-
-# vim:set noet ai sts=8 sw=8 tw=0:
diff --git a/debian/xsfbs/xsfbs.sh b/debian/xsfbs/xsfbs.sh
deleted file mode 100644
index 813fd8d..0000000
--- a/debian/xsfbs/xsfbs.sh
+++ /dev/null
@@ -1,622 +0,0 @@
-# This is the X Strike Force shell library for X Window System package
-# maintainer scripts. It serves to define shell functions commonly used by
-# such packages, and performs some error checking necessary for proper operation
-# of those functions. By itself, it does not "do" much; the maintainer scripts
-# invoke the functions defined here to accomplish package installation and
-# removal tasks.
-
-# If you are reading this within a Debian package maintainer script (e.g.,
-# /var/lib/dpkg/info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
-# skip past this library by scanning forward in this file to the string
-# "GOBSTOPPER".
-
-SOURCE_VERSION=@SOURCE_VERSION@
-OFFICIAL_BUILD=@OFFICIAL_BUILD@
-
-# Use special abnormal exit codes so that problems with this library are more
-# easily tracked down.
-SHELL_LIB_INTERNAL_ERROR=86
-SHELL_LIB_THROWN_ERROR=74
-SHELL_LIB_USAGE_ERROR=99
-
-# old -> new variable names
-if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
- DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
-fi
-if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
- DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
-fi
-
-# initial sanity checks
-if [ -z "$THIS_PACKAGE" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_PACKAGE shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of this package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ -z "$THIS_SCRIPT" ]; then
- cat >&2 <<EOF
-Error: package maintainer script attempted to use shell library without
-definining \$THIS_SCRIPT shell variable. Please report the package name,
-version, and the text of this error message to the Debian Bug Tracking System.
-Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
-instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
-"doc-debian" package, or install the "reportbug" package and use the command of
-the same name to file a report against version $SOURCE_VERSION of the
-"$THIS_PACKAGE" package.
-EOF
- exit $SHELL_LIB_USAGE_ERROR
-fi
-
-if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
- RECONFIGURE="true"
-else
- RECONFIGURE=
-fi
-
-if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
- FIRSTINST="yes"
-fi
-
-if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
- UPGRADE="yes"
-fi
-
-trap "message;\
- message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
- message;\
- exit 1" HUP INT QUIT TERM
-
-reject_nondigits () {
- # syntax: reject_nondigits [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted) for
- # characters other than decimal digits and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain anything but digits?
- if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- # can't use die(), because it wraps message() which wraps this function
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
- "possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-reject_unlikely_path_chars () {
- # syntax: reject_unlikely_path_chars [ operand ... ]
- #
- # scan operands (typically shell variables whose values cannot be trusted) for
- # characters unlikely to be seen in a path and which the shell might
- # interpret and barf if any are found
- while [ -n "$1" ]; do
- # does the operand contain any funny characters?
- if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
- # can't use die(), because I want to avoid forward references
- echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
- "encountered possibly malicious garbage \"$1\"" >&2
- exit $SHELL_LIB_THROWN_ERROR
- fi
- shift
- done
-}
-
-# Query the terminal to establish a default number of columns to use for
-# displaying messages to the user. This is used only as a fallback in the
-# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while
-# the script is running, and this cannot, only being calculated once.)
-DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
-if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
- DEFCOLUMNS=80
-fi
-
-message () {
- # pretty-print messages of arbitrary length
- reject_nondigits "$COLUMNS"
- echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
-}
-
-observe () {
- # syntax: observe message ...
- #
- # issue observational message suitable for logging someday when support for
- # it exists in dpkg
- if [ -n "$DEBUG_XORG_PACKAGE" ]; then
- message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
- fi
-}
-
-warn () {
- # syntax: warn message ...
- #
- # issue warning message suitable for logging someday when support for
- # it exists in dpkg; also send to standard error
- message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
-}
-
-die () {
- # syntax: die message ...
- #
- # exit script with error message
- message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
- exit $SHELL_LIB_THROWN_ERROR
-}
-
-internal_error () {
- # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
- message "internal error: $*"
- if [ -n "$OFFICIAL_BUILD" ]; then
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of" \
- "the same name to file a report."
- fi
- exit $SHELL_LIB_INTERNAL_ERROR
-}
-
-usage_error () {
- message "usage error: $*"
- message "Please report a bug in the $THIS_SCRIPT script of the" \
- "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
- "Tracking System. Include all messages above that mention the" \
- "$THIS_PACKAGE package. Visit " \
- "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
- "instructions, read the file" \
- "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
- "package, or install the reportbug package and use the command of" \
- "the same name to file a report."
- exit $SHELL_LIB_USAGE_ERROR
-}
-
-font_update () {
- # run $UPDATECMDS in $FONTDIRS
-
- local dir cmd shortcmd x_font_dir_prefix
-
- x_font_dir_prefix="/usr/share/fonts/X11"
-
- if [ -z "$UPDATECMDS" ]; then
- usage_error "font_update() called but \$UPDATECMDS not set"
- fi
- if [ -z "$FONTDIRS" ]; then
- usage_error "font_update() called but \$FONTDIRS not set"
- fi
-
- reject_unlikely_path_chars "$UPDATECMDS"
- reject_unlikely_path_chars "$FONTDIRS"
-
- for dir in $FONTDIRS; do
- if [ -d "$x_font_dir_prefix/$dir" ]; then
- for cmd in $UPDATECMDS; do
- if which "$cmd" > /dev/null 2>&1; then
- shortcmd=${cmd##*/}
- observe "running $shortcmd in $dir font directory"
- cmd_opts=
- if [ "$shortcmd" = "update-fonts-alias" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-dir" ]; then
- cmd_opts=--x11r7-layout
- fi
- if [ "$shortcmd" = "update-fonts-scale" ]; then
- cmd_opts=--x11r7-layout
- fi
- $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
- "failed; font directory data may not" \
- "be up to date"
- else
- warn "$cmd not found; not updating corresponding $dir font" \
- "directory data"
- fi
- done
- else
- warn "$dir is not a directory; not updating font directory data"
- fi
- done
-}
-
-remove_conffile_prepare () {
- # syntax: remove_conffile_prepare filename official_md5sum ...
- #
- # Check a conffile "filename" against a list of canonical MD5 checksums.
- # If the file's current MD5 checksum matches one of the "official_md5sum"
- # operands provided, then prepare the conffile for removal from the system.
- # We defer actual deletion until the package is configured so that we can
- # roll this operation back if package installation fails.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install" and verify $2 to ensure the package is being upgraded from a
- # version (or installed over a version removed-but-not-purged) prior to the
- # one in which the conffile was obsoleted.
-
- local conffile current_checksum
-
- # validate arguments
- if [ $# -lt 2 ]; then
- usage_error "remove_conffile_prepare() called with wrong number of" \
- "arguments; expected at least 2, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
- shift
-
- # does the conffile even exist?
- if [ -e "$conffile" ]; then
- # calculate its checksum
- current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
- # compare it to each supplied checksum
- while [ -n "$1" ]; do
- if [ "$current_checksum" = "$1" ]; then
- # we found a match; move the confffile and stop looking
- observe "preparing obsolete conffile $conffile for removal"
- mv "$conffile" "$conffile.$THIS_PACKAGE-tmp"
- break
- fi
- shift
- done
- fi
-}
-
-remove_conffile_lookup () {
- # syntax: remove_conffile_lookup package filename
- #
- # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal
- # if it matches the actual file's md5sum.
- #
- # Call this function when you would call remove_conffile_prepare but only
- # want to check against dpkg's status database instead of known checksums.
-
- local package conffile old_md5sum
-
- # validate arguments
- if [ $# -ne 2 ]; then
- usage_error "remove_conffile_lookup() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- package="$1"
- conffile="$2"
-
- if ! [ -e "$conffile" ]; then
- return
- fi
- old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \
- awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')"
- if [ -n "$old_md5sum" ]; then
- remove_conffile_prepare "$conffile" "$old_md5sum"
- fi
-}
-
-remove_conffile_commit () {
- # syntax: remove_conffile_commit filename
- #
- # Complete the removal of a conffile "filename" that has become obsolete.
- #
- # Call this function from a postinst script after having used
- # remove_conffile_prepare() in the preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "remove_conffile_commit() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- # if the temporary file created by remove_conffile_prepare() exists, remove it
- if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
- observe "committing removal of obsolete conffile $conffile"
- rm "$conffile.$THIS_PACKAGE-tmp"
- fi
-}
-
-remove_conffile_rollback () {
- # syntax: remove_conffile_rollback filename
- #
- # Roll back the removal of a conffile "filename".
- #
- # Call this function from a postrm script in the event $1 is "abort-upgrade"
- # or "abort-install" is after having used remove_conffile_prepare() in the
- # preinst.
-
- local conffile
-
- # validate arguments
- if [ $# -ne 1 ]; then
- usage_error "remove_conffile_rollback() called with wrong number of" \
- "arguments; expected 1, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- conffile="$1"
-
- # if the temporary file created by remove_conffile_prepare() exists, move it
- # back
- if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
- observe "rolling back removal of obsolete conffile $conffile"
- mv "$conffile.$THIS_PACKAGE-tmp" "$conffile"
- fi
-}
-
-replace_conffile_with_symlink_prepare () {
- # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
- # official_md5sum ...
- #
- # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
- # If the file's current MD5 checksum matches one of the "official_md5sum"
- # operands provided, then prepare the conffile for removal from the system.
- # We defer actual deletion until the package is configured so that we can
- # roll this operation back if package installation fails. Otherwise copy it
- # to newfilename and let dpkg handle it through conffiles mechanism.
- #
- # Call this function from a preinst script in the event $1 is "upgrade" or
- # "install" and verify $2 to ensure the package is being upgraded from a
- # version (or installed over a version removed-but-not-purged) prior to the
- # one in which the conffile was obsoleted.
-
- local conffile current_checksum
-
- # validate arguments
- if [ $# -lt 3 ]; then
- usage_error "replace_conffile_with_symlink_prepare() called with wrong" \
- " number of arguments; expected at least 3, got $#"
- exit $SHELL_LIB_USAGE_ERROR
- fi
-
- oldconffile="$1"
- shift
- newconffile="$1"
- shift
-
- remove_conffile_prepare "$_oldconffile" "$@"
- # If $oldconffile still exists, then md5sums didn't match.
- # Copy it to new one.
- if [ -f "$oldconffile" ]; then
- cp "$oldconffile" "$newconffile"
- fi
-
-}
-
-replace_conffile_with_symlink_commit () {
Reply to: