Your message dated Mon, 31 Jan 2011 11:29:58 +0100 with message-id <20110131102958.GM10244@radis.liafa.jussieu.fr> and subject line Re: Bug#547143: xserver-xorg: xorg/evdev/HAL versus serial mouse has caused the Debian Bug report #547143, regarding xserver-xorg: xorg/evdev/HAL versus serial mouse to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 547143: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=547143 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg: xorg/evdev/HAL versus serial mouse
- From: Justin B Rye <jbr@edlug.org.uk>
- Date: Thu, 17 Sep 2009 09:48:53 +0100
- Message-id: <20090917084853.GA8513@xibalba.demon.co.uk>
Package: xserver-xorg Version: 1:7.4+4 Severity: wishlist I'm calling this wishlist because I've eventually managed to get X working again; it's essentially a documentation issue. As NEWS.Debian says, "devices configured in xorg.conf to use the mouse or kbd driver are ignored by the X server by default." I'm meant to switch over to HAL and evdev. That's all very well for you kids with your shiny twentyfirst-century laptops, but unfortunately, this old machine has no PS/2 ports. It uses an AT-port keyboard (which evdev is happy to recognise as an input device) and a serial mouse (which is apparently ignored). I don't see any mention of this issue in the docs, so I thought I'd better report it and the workaround I'm using. The xorg.conf below gets X to work as normal again with a minimum of complaining - though it also requires HAL to be disabled via an "exit 0" at the top of the init.d script. In principle there's probably some alternative involving writing appropriate custom .fdi files, but if I could work out how to do that sort of thing I'd be busy using my mutant psychic powers to fight superpowered criminals like the rest of you X-developers! HAL has no discernible reason for being present on this box, so I'm just nobbling it. Note that just disabling HAL and AutoAddDevices wasn't enough - I've had to put lots more lines back in my xorg.conf that I'd previously been leaving to the defaults. Many thanks for providing /usr/share/doc/xserver-xorg/examples/xorg.conf! If it has been decided that xorg no longer supports serial mice, that's fine; just make sure the announcement gets into the Squeeze release notes. Otherwise, please document somewhere the approved method for keeping them working - the obvious place would be a NEWS.Debian file for xserver-xorg-input-mouse. -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 2009-08-10 17:18 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1689976 2009-08-06 17:55 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400/G450 (rev 05) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 1072 2009-09-16 14:55 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: #<jbr> comments like -*- sh -*- # cf: /usr/share/doc/xserver-xorg/examples/xorg.conf Section "ServerFlags" Option "AutoAddDevices" "False" Option "AutoEnableDevices" "False" EndSection Section "InputDevice" Identifier "Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbLayout" "gb" EndSection Section "InputDevice" Identifier "Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/ttyS0" Option "Protocol" "MouseMan" EndSection Section "Device" Identifier "Video Card" Option "UseFBDev" "False" EndSection Section "Monitor" Identifier "Monitor" HorizSync 30-82 VertRefresh 30-100 EndSection Section "Screen" Identifier "Screen" Device "Video Card" Monitor "Monitor" SubSection "Display" Modes "1280x1024" EndSubSection EndSection Section "ServerLayout" Identifier "Layout" Screen "Screen" InputDevice "Keyboard" InputDevice "Mouse" EndSection #</jbr> Xorg X server log files on system: -rw-r----- 1 root adm 30175 2009-09-16 14:54 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: X.Org X Server 1.6.3 Release Date: 2009-7-31 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.30.4-dsa-ia32 i686 Debian Current Operating System: Linux xan 2.6.30.custom #1 Sun Aug 16 16:07:03 BST 2009 i586 Build Date: 06 August 2009 04:49:57PM xorg-server 2:1.6.3-1+b1 (buildd@murphy.debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 16 14:47:02 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout" (**) |-->Screen "Screen" (0) (**) | |-->Monitor "Monitor" (**) | |-->Device "Video Card" (**) |-->Input Device "Keyboard" (**) |-->Input Device "Mouse" (**) Option "AutoAddDevices" "False" (**) Option "AutoEnableDevices" "False" (**) Not automatically adding devices (**) Not automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Loader magic: 0x6c0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 6 (--) PCI:*(0:1:0:0) 102b:0525:102b:3693 Matrox Graphics, Inc. MGA G400/G450 rev 5, Mem @ 0xd4000000/33554432, 0xd6000000/16384, 0xd7000000/8388608, BIOS @ 0x????????/65536 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (==) Matched mga for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "mga" (II) Loading /usr/lib/xorg/modules/drivers//mga_drv.so (II) Module mga: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.4.11 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.4.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim, mgag200 eW Nuvoton, mgag400, mgag550 (II) Primary Device is: PCI 01@00:00:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.3, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (--) MGA(0): Chipset: "mgag400" (G400) (--) MGA(0): Linear framebuffer at 0xD4000000 (--) MGA(0): MMIO registers at 0xD6000000 (--) MGA(0): Pseudo-DMA transfer window at 0xD7000000 (==) MGA(0): Depth 24, (--) framebuffer bpp 32 (==) MGA(0): RGB weight 888 (**) MGA(0): Option "UseFBDev" "False" (==) MGA(0): Using AGP 1x mode (==) MGA(0): Using HW cursor (==) MGA(0): Using XAA acceleration (--) MGA(0): Video BIOS info block at offset 0x07CE0 (==) MGA(0): VideoRAM: 16384 kByte (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) MGA(0): I2C bus "DDC P1" initialized. (II) MGA(0): I2C device "DDC P1:E-EDID segment register" registered at address 0x60. (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0. (--) MGA(0): No DDC signal (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) MGA(0): initializing int10 (II) MGA(0): Primary V_BIOS segment is: 0xc000 (II) MGA(0): VESA BIOS detected (II) MGA(0): VESA VBE Version 3.0 (II) MGA(0): VESA VBE Total Mem: 16384 kB (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc. (II) MGA(0): VESA VBE OEM Software Rev: 2.1 (II) MGA(0): VESA VBE OEM Vendor: Matrox (II) MGA(0): VESA VBE OEM Product: Matrox G400 (II) MGA(0): VESA VBE OEM Product Rev: 00 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) MGA(0): VESA VBE DDC supported (II) MGA(0): VESA VBE DDC Level none (II) MGA(0): VESA VBE DDC transfer in appr. 0 sec. (II) MGA(0): VESA VBE DDC read failed (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0) (==) MGA(0): Min pixel clock is 17 MHz (--) MGA(0): Max pixel clock is 300 MHz (II) MGA(0): Monitor: Using hsync range of 30.00-82.00 kHz (II) MGA(0): Monitor: Using vrefresh range of 30.00-100.00 Hz (II) MGA(0): Clock range: 17.75 to 300.00 MHz (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1280x960" (hsync out of range) (II) MGA(0): Not using default mode "640x480" (hsync out of range) (II) MGA(0): Not using default mode "1280x1024" (hsync out of range) (II) MGA(0): Not using default mode "640x512" (hsync out of range) (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "800x600" (hsync out of range) (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "800x600" (hsync out of range) (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "800x600" (hsync out of range) (II) MGA(0): Not using default mode "1792x1344" (hsync out of range) (II) MGA(0): Not using default mode "896x672" (hsync out of range) (II) MGA(0): Not using default mode "1792x1344" (hsync out of range) (II) MGA(0): Not using default mode "896x672" (hsync out of range) (II) MGA(0): Not using default mode "1856x1392" (hsync out of range) (II) MGA(0): Not using default mode "928x696" (hsync out of range) (II) MGA(0): Not using default mode "1856x1392" (hsync out of range) (II) MGA(0): Not using default mode "928x696" (hsync out of range) (II) MGA(0): Not using default mode "1920x1440" (hsync out of range) (II) MGA(0): Not using default mode "960x720" (hsync out of range) (II) MGA(0): Not using default mode "1920x1440" (hsync out of range) (II) MGA(0): Not using default mode "960x720" (hsync out of range) (II) MGA(0): Not using default mode "1152x864" (hsync out of range) (II) MGA(0): Not using default mode "576x432" (hsync out of range) (II) MGA(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (II) MGA(0): Not using default mode "1400x1050" (hsync out of range) (II) MGA(0): Not using default mode "700x525" (hsync out of range) (II) MGA(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking) (II) MGA(0): Not using default mode "1680x1050" (hsync out of range) (II) MGA(0): Not using default mode "840x525" (hsync out of range) (II) MGA(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking) (II) MGA(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking) (II) MGA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "960x720" (hsync out of range) (II) MGA(0): Not using default mode "2048x1536" (hsync out of range) (II) MGA(0): Not using default mode "1024x768" (hsync out of range) (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1024x768" (hsync out of range) (II) MGA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) MGA(0): Not using default mode "1024x768" (hsync out of range) (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size) (II) MGA(0): Not using default mode "1680x1050" (width too large for virtual size) (II) MGA(0): Not using default mode "1680x1050" (width too large for virtual size) (II) MGA(0): Not using default mode "1680x1050" (width too large for virtual size) (II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size) (II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size) (II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size) (II) MGA(0): Not using default mode "1440x900" (width too large for virtual size) (II) MGA(0): Not using default mode "1360x768" (width too large for virtual size) (--) MGA(0): Virtual size is 1280x1024 (pitch 1280) (**) MGA(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz (II) MGA(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (**) MGA(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) MGA(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (**) MGA(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) MGA(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (**) MGA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz (II) MGA(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (**) MGA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz (II) MGA(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (**) MGA(0): Default mode "1152x864": 121.5 MHz, 77.5 kHz, 85.1 Hz (II) MGA(0): Modeline "1152x864"x85.1 121.50 1152 1216 1344 1568 864 865 868 911 +hsync -vsync (77.5 kHz) (**) MGA(0): Default mode "1152x864": 119.7 MHz, 77.1 kHz, 85.0 Hz (II) MGA(0): Modeline "1152x864"x85.0 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync (77.1 kHz) (**) MGA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (II) MGA(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (**) MGA(0): Default mode "1152x864": 105.0 MHz, 67.6 kHz, 75.0 Hz (II) MGA(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.6 kHz) (**) MGA(0): Default mode "1152x864": 96.8 MHz, 63.0 kHz, 70.0 Hz (II) MGA(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz) (**) MGA(0): Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz (II) MGA(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (**) MGA(0): Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz (II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (**) MGA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) MGA(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**) MGA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**) MGA(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I) (II) MGA(0): Modeline "1024x768"x86.9 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz) (**) MGA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) MGA(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) MGA(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (**) MGA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (**) MGA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (**) MGA(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D) (II) MGA(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz) (**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) MGA(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz) (**) MGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) MGA(0): Default mode "840x525": 93.5 MHz, 82.3 kHz, 75.0 Hz (D) (II) MGA(0): Modeline "840x525"x75.0 93.50 840 900 988 1136 525 526 529 549 doublescan -hsync +vsync (82.3 kHz) (**) MGA(0): Default mode "840x525": 87.0 MHz, 76.6 kHz, 69.9 Hz (D) (II) MGA(0): Modeline "840x525"x69.9 87.00 840 900 988 1136 525 526 529 548 doublescan -hsync +vsync (76.6 kHz) (**) MGA(0): Default mode "840x525": 73.1 MHz, 65.3 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz) (**) MGA(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D) (II) MGA(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz) (**) MGA(0): Default mode "700x525": 72.5 MHz, 76.5 kHz, 70.1 Hz (D) (II) MGA(0): Modeline "700x525"x70.1 72.53 700 748 824 948 525 525 527 546 doublescan -hsync +vsync (76.5 kHz) (**) MGA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz) (**) MGA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D) (II) MGA(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz) (**) MGA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz) (**) MGA(0): Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D) (II) MGA(0): Modeline "720x450"x59.9 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz) (**) MGA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (**) MGA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (**) MGA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz) (**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) MGA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) MGA(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (**) MGA(0): Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz) (**) MGA(0): Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D) (II) MGA(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz) (**) MGA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) MGA(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (**) MGA(0): Default mode "576x432": 60.8 MHz, 77.5 kHz, 85.2 Hz (D) (II) MGA(0): Modeline "576x432"x85.2 60.75 576 608 672 784 432 432 434 455 doublescan +hsync -vsync (77.5 kHz) (**) MGA(0): Default mode "576x432": 59.8 MHz, 77.1 kHz, 85.1 Hz (D) (II) MGA(0): Modeline "576x432"x85.1 59.83 576 612 676 776 432 432 434 453 doublescan -hsync +vsync (77.1 kHz) (**) MGA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D) (II) MGA(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz) (**) MGA(0): Default mode "576x432": 52.5 MHz, 67.6 kHz, 75.0 Hz (D) (II) MGA(0): Modeline "576x432"x75.0 52.49 576 612 676 776 432 432 434 451 doublescan -hsync +vsync (67.6 kHz) (**) MGA(0): Default mode "576x432": 48.4 MHz, 63.0 kHz, 70.0 Hz (D) (II) MGA(0): Modeline "576x432"x70.0 48.38 576 612 672 768 432 432 434 450 doublescan -hsync +vsync (63.0 kHz) (**) MGA(0): Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D) (II) MGA(0): Modeline "576x432"x60.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz) (**) MGA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) MGA(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (**) MGA(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D) (II) MGA(0): Modeline "512x384"x85.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz) (**) MGA(0): Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D) (II) MGA(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz) (**) MGA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) (II) MGA(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz) (**) MGA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) (II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz) (**) MGA(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D) (II) MGA(0): Modeline "512x384"x86.6 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync (35.5 kHz) (**) MGA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) (II) MGA(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz) (**) MGA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D) (II) MGA(0): Modeline "400x300"x85.3 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz) (**) MGA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) (II) MGA(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz) (**) MGA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) (II) MGA(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz) (**) MGA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz) (**) MGA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) (II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz) (**) MGA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D) (II) MGA(0): Modeline "320x240"x85.2 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz) (**) MGA(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D) (II) MGA(0): Modeline "360x200"x85.0 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz) (++) MGA(0): DPI set to (100, 100) (II) MGA(0): YDstOrg is set to 0 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.6.3, module version = 1.2.1 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (--) MGA(0): 16 DWORD fifo (==) MGA(0): Default visual is TrueColor (II) MGA(0): [drm] bpp: 32 depth: 24 (II) MGA(0): [drm] Sarea 2200+664: 2864 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master succeeded. (II) MGA(0): [drm] Using the DRM lock SAREA also for drawables. (II) MGA(0): [drm] framebuffer handle = 0xd4000000 (II) MGA(0): [drm] added 1 reserved context for kernel (II) MGA(0): X context handle = 0x1 (II) MGA(0): [drm] installed DRM signal handler (II) MGA(0): [dri] visual configs initialized (II) MGA(0): Memory manager initialized to (0,0) (1280,1227) (II) MGA(0): Largest offscreen area available: 1280 x 203 (II) MGA(0): Reserved back buffer at offset 0x600000 (II) MGA(0): Reserved depth buffer at offset 0xb00000 (II) MGA(0): Reserved 0 kb for textures at offset 0x1000000 (II) MGA(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid filled trapezoids 8x8 mono pattern filled rectangles 8x8 mono pattern filled trapezoids Indirect CPU to Screen color expansion Screen to Screen color expansion Solid Lines Dashed Lines Scanline Image Writes Driver provided FillMono8x8PatternRects replacement Setting up tile and stipple cache: 10 128x128 slots (==) MGA(0): Backing store disabled (==) MGA(0): Silken mouse enabled (II) MGA(0): DPMS enabled (II) MGA(0): Using overlay video (II) MGA(0): [DRI] installation complete (II) MGA(0): [drm] Mapped 128 DMA buffers (II) MGA(0): [drm] dma control initialized, using IRQ 12 (II) MGA(0): Direct rendering enabled (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: Loaded and initialized /usr/lib/dri/mga_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (**) Option "CoreKeyboard" (**) Keyboard: always reports core events (**) Option "Protocol" "standard" (**) Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard: XkbModel: "pc105" (**) Option "XkbLayout" "gb" (**) Keyboard: XkbLayout: "gb" (**) Option "CustomKeycodes" "off" (**) Keyboard: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard" (type: KEYBOARD) (**) Option "Protocol" "MouseMan" (**) Mouse: Device: "/dev/ttyS0" (**) Mouse: Protocol: "MouseMan" (**) Mouse: always reports core events (**) Option "Device" "/dev/ttyS0" (**) Option "BaudRate" "1200" (**) Option "StopBits" "1" (**) Option "DataBits" "7" (**) Option "Parity" "None" (**) Option "Vmin" "1" (**) Option "Vtime" "0" (**) Option "FlowControl" "None" (==) Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Mouse: ZAxisMapping: buttons 4 and 5 (**) Mouse: Buttons: 9 (**) Mouse: Sensitivity: 1 (**) Mouse: BaudRate: 1200 (II) XINPUT: Adding extended input device "Mouse" (type: MOUSE) (**) Mouse: (accel) keeping acceleration scheme 1 (**) Mouse: (accel) filter chain progression: 2.00 (**) Mouse: (accel) filter stage 0: 20.00 ms (**) Mouse: (accel) set acceleration profile 0 (EE) config/hal: couldn't initialise context: unknown error (null) (II) AIGLX: Suspending AIGLX clients for VT switch (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) UnloadModule: "kbd" (II) UnloadModule: "mouse" (II) MGA(0): [drm] removed 1 reserved context for kernel (II) MGA(0): [drm] unmapping 8192 bytes of SAREA 0xd086f000 at 0xb7a80000 (II) MGA(0): [drm] Closed DRM master. HAL Information (lshal): # cut'n'pasted in from a run with HAL temporarily restarted udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) info.product = 'AT Translated Set 2 keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.device = '/dev/input/event1' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.product = 'AT Translated Set 2 keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'gb' (string) input.xkb.model = 'pc105' (string) input.xkb.rules = 'base' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/class/input/input1/event1' (string) DRM Information from dmesg: matroxfb: Matrox G400 (AGP) detected Linux agpgart interface v0.103 agpgart-ali 0000:00:00.0: ALi M1541 chipset agpgart-ali 0000:00:00.0: AGP aperture is 64M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized mga 3.2.1 20051102 for 0000:01:00.0 on minor 0 agpgart-ali 0000:00:00.0: AGP 1.0 bridge agpgart-ali 0000:00:00.0: putting AGP V2 device into 1x mode matroxfb 0000:01:00.0: putting AGP V2 device into 1x mode [drm] Initialized card for AGP DMA. agpgart-ali 0000:00:00.0: AGP 1.0 bridge agpgart-ali 0000:00:00.0: putting AGP V2 device into 1x mode matroxfb 0000:01:00.0: putting AGP V2 device into 1x mode [drm] Initialized card for AGP DMA. agpgart-ali 0000:00:00.0: AGP 1.0 bridge agpgart-ali 0000:00:00.0: putting AGP V2 device into 1x mode matroxfb 0000:01:00.0: putting AGP V2 device into 1x mode [drm] Initialized card for AGP DMA. agpgart-ali 0000:00:00.0: AGP 1.0 bridge agpgart-ali 0000:00:00.0: putting AGP V2 device into 1x mode matroxfb 0000:01:00.0: putting AGP V2 device into 1x mode [drm] Initialized card for AGP DMA. agpgart-ali 0000:00:00.0: AGP 1.0 bridge agpgart-ali 0000:00:00.0: putting AGP V2 device into 1x mode matroxfb 0000:01:00.0: putting AGP V2 device into 1x mode [drm] Initialized card for AGP DMA. agpgart-ali 0000:00:00.0: AGP 1.0 bridge agpgart-ali 0000:00:00.0: putting AGP V2 device into 1x mode matroxfb 0000:01:00.0: putting AGP V2 device into 1x mode [drm] Initialized card for AGP DMA. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (50, 'unstable') Architecture: i386 (i586) Kernel: Linux 2.6.30.custom Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg depends on: ii console-setup 1.44 console font and keymap setup prog ii hal 0.5.13-3 Hardware Abstraction Layer ii libc6 2.9-25 GNU C Library: Shared libraries ii x11-xkb-utils 7.4+3 X11 XKB utilities ii xkb-data 1.6-1 X Keyboard Extension (XKB) configu ii xserver-xorg-core 2:1.6.3-1+b1 Xorg X server - core server ii xserver-xorg-input-evdev 1:2.2.5-1 X.Org X server -- evdev input driv ii xserver-xorg-input-kbd [ 1:1.3.2-4 X.Org X server -- keyboard input d ii xserver-xorg-input-mouse 1:1.4.0-4 X.Org X server -- mouse input driv ii xserver-xorg-video-mga [ 1:1.4.11.dfsg-1 X.Org X server -- MGA display driv Versions of packages xserver-xorg recommends: ii libgl1-mesa-dri 7.5.1-1 A free implementation of the OpenG ii udev 0.141-2 /dev/ and hotplug management daemo xserver-xorg suggests no packages. -- debconf-show failed -- JBR For trifling occasions it is better to accomplish things simply by yelling - _Hagakure_, Yamamoto Tsunetomo (1716)
--- End Message ---
--- Begin Message ---
- To: Justin B Rye <jbr@edlug.org.uk>, 547143-done@bugs.debian.org
- Subject: Re: Bug#547143: xserver-xorg: xorg/evdev/HAL versus serial mouse
- From: Julien Cristau <jcristau@debian.org>
- Date: Mon, 31 Jan 2011 11:29:58 +0100
- Message-id: <20110131102958.GM10244@radis.liafa.jussieu.fr>
- In-reply-to: <[🔎] 20110131101836.GA7767@xibalba.demon.co.uk>
- References: <20090917084853.GA8513@xibalba.demon.co.uk> <[🔎] 20110131101836.GA7767@xibalba.demon.co.uk>
On Mon, Jan 31, 2011 at 10:18:36 +0000, Justin B Rye wrote: > Justin B Rye wrote: > > I'm calling this wishlist because I've eventually managed to get X > > working again; it's essentially a documentation issue. > > The issue of serial mice not working via evdev is documented in the > draft Squeeze releasenotes (along with a pointer to the package > inputattach), so I'd say you're entitled to close this. Thanks, I'll do that with this message. Cheers, JulienAttachment: signature.asc
Description: Digital signature
--- End Message ---