--- Begin Message ---
Package: xserver-xorg-video-r128
Version: 6.8.0-1
Severity: normal
Package: xserver-xorg-video-r128
Version: 6.8.0-1
Severity: normal
I just installed as a new:
Debian GNU/Linux 5.0.7 Lenny Official i386 CD Binary 20101127
I have an Dell Inspiron 8000 Laptop with broken screen and I can
only see a small part of it in the lower left corner. That is why I have
an old Epson monitor connected, Model: CC1428N A-Code: A882511 with a
resolution 800x600 or 1024x768.
When I boot without the external monitor attached there is no problem.
I can change character consoles with Ctrl+Alt+F1,F2 ... to Ctrl+Alt+ F7
which shows the graphical mode (gnome) in the internal panel.
(The only problem is that the laptop screen is broken and
I can only see a small part of it in the lower left corner as I explained).
When I boot with external monitor attached I have a problem.
I can see every character consoles with Ctrl+Alt+F1,F2 ... to Ctrl+Alt+F6
only on the external monitor and not at the internal panel.In others
words, the internal panel gets inactive while the external is inactive
in character mode.
(this is not so important to me since I only need to see the external
monitor but I think it should be possible).
The problem:
The large specific problem is that when I press Ctrl+Alt+F7
I can only see the graphics console on the internal panel(broken)
and I can not see it on the external monitor that is what
I need to happen. In others words the internal panel is active
and the external monitor gets inactive in graphics mode.
The question:
How I can see the graphics console (gnome) on the external monitor?
I tried as root to fix the problem:
I configured the xorg.conf file as described in some reportbug.
(I'm not sure but it seems that debian is not reading this file).
Also tried:
# xrandr -v
cant open display
# xhost +
xhost: unable to open display ""
# DISPLAY=:0.0
# export DISPLAY
# xrandr -v
No protocol especified
cant open display :0.0
# xhost +
No protocol especified
xhost: unable to open display ":0.0"
#
I ask if you can please help me in this way do so by sending me
instructions as I should write in the command line or xorg.conf
because I'm new to the wonderful world of Linux.
Thank you very much.
-- Package-specific info:
Contents of /var/lib/x11/X.roster:
xserver-xorg
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 ene 29 01:02 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1718548 sep 25 07:53 /usr/bin/Xorg
Contents of /var/lib/x11/xorg.conf.roster:
xserver-xorg
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M4 AGP
/etc/X11/xorg.conf unchanged from checksum in /var/lib/x11/xorg.conf.md5sum.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1077 ene 29 01:02 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 35823 ene 30 00:30 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny3)
Current Operating System: Linux debian 2.6.26-2-686 #1 SMP Thu Nov 25 01:53:57 UTC 2010 i686
Build Date: 25 September 2010 12:05:44PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 30 00:29:32 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) |-->Input Device "Configured Mouse"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the first keyboard device.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e3800
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1131 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,244c card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244a card 8086,4541 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 8086,4541 rev 02 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4d46 card 1028,00a4 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:03:0: chip 125d,1998 card 1028,00a4 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:0f:0: chip 104c,ac42 card e000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0f:1: chip 104c,ac42 card e800,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0f:2: chip 104c,8027 card 1028,00a4 rev 00 class 0c,00,10 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,16), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[4] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[5] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[6] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[7] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf4000000 - 0xfbffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:15:0), (2,3,6), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (2:15:1), (2,7,10), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc Rage Mobility M4 AGP rev 0, Mem @ 0xe8000000/26, 0xfcffc000/14, I/O @ 0xcc00/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe4000000 from 0xe7ffffff to 0xe3ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[1] -1 0 0xf8ffd800 - 0xf8ffdfff (0x800) MX[B]
[2] -1 0 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
[3] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[4] -1 0 0xfcffc000 - 0xfcffffff (0x4000) MX[B](B)
[5] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[7] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]
[8] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[9] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[1] -1 0 0xf8ffd800 - 0xf8ffdfff (0x800) MX[B]
[2] -1 0 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
[3] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[4] -1 0 0xfcffc000 - 0xfcffffff (0x4000) MX[B](B)
[5] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[7] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]
[8] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[9] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[5] -1 0 0xf8ffd800 - 0xf8ffdfff (0x800) MX[B]
[6] -1 0 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
[7] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[8] -1 0 0xfcffc000 - 0xfcffffff (0x4000) MX[B](B)
[9] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[13] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]
[14] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[15] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched r128 from file name r128.ids in autoconfig
(==) Matched r128 for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 6.8.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 Mobility M4 MF (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[5] -1 0 0xf8ffd800 - 0xf8ffdfff (0x800) MX[B]
[6] -1 0 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
[7] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[8] -1 0 0xfcffc000 - 0xfcffffff (0x4000) MX[B](B)
[9] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[13] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]
[14] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[15] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[5] -1 0 0xf8ffd800 - 0xf8ffdfff (0x800) MX[B]
[6] -1 0 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
[7] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[8] -1 0 0xfcffc000 - 0xfcffffff (0x4000) MX[B](B)
[9] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[16] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]
[17] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[18] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
[19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 1 card 0 func 0
(II) R128(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Mobility M4 MF (AGP)" (ChipID = 0x4d46)
(--) R128(0): Linear framebuffer at 0xe8000000
(--) R128(0): MMIO registers at 0xfcffc000
(--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using flat panel for display
(II) R128(0): Primary Display == Type 2
(II) R128(0): Panel size: 1400x1050
(II) R128(0): Panel ID: Hitachi TX36D98VC1CAA
(II) R128(0): Panel Type: Color, Single, TFT
(II) R128(0): Panel Interface: LVDS
(II) R128(0): PLL parameters: rf=2700 rd=12 min=12000 max=27000; xclk=10500
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 8192 kB
(II) R128(0): VESA VBE OEM: ATI MOBILE M4
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: M4
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level none
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read failed
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): Configured Monitor: Using default hsync range of 31.50-37.90 kHz
(II) R128(0): Configured Monitor: Using default vrefresh range of 50.00-70.00 Hz
(WW) R128(0): Unable to estimate virtual size
(II) R128(0): Clock range: 12.00 to 270.00 MHz
(II) R128(0): Not using default mode "640x350" (vrefresh out of range)
(II) R128(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x400" (vrefresh out of range)
(II) R128(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "720x400" (no mode of this name)
(II) R128(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x864" (no mode of this name)
(II) R128(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x960" (no mode of this name)
(II) R128(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x960" (no mode of this name)
(II) R128(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "832x624" (no mode of this name)
(II) R128(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x768" (no mode of this name)
(II) R128(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x800" (no mode of this name)
(II) R128(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x768" (no mode of this name)
(II) R128(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x864" (no mode of this name)
(II) R128(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1440x900" (no mode of this name)
(II) R128(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1024" (no mode of this name)
(II) R128(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1680x1050" (no mode of this name)
(II) R128(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) R128(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) R128(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Modifying mode according to VBIOS: 800x600 [pclk 40.0 MHz] for FP to: 800x600 [pclk 108.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 800x600 [pclk 36.0 MHz] for FP to: 800x600 [pclk 108.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 640x480 [pclk 25.2 MHz] for FP to: 640x480 [pclk 108.0 MHz]
(--) R128(0): Virtual size is 800x600 (pitch 800)
(**) R128(0): *Default mode "800x600": 108.0 MHz (scaled from 40.0 MHz), 37.9 kHz, 60.3 Hz
(II) R128(0): Modeline "800x600"x60.3 108.00 800 848 862 1096 600 600 603 616 +hsync +vsync (37.9 kHz)
(**) R128(0): *Default mode "800x600": 108.0 MHz (scaled from 36.0 MHz), 35.2 kHz, 56.2 Hz
(II) R128(0): Modeline "800x600"x56.2 108.00 800 848 862 1096 600 600 603 616 +hsync +vsync (35.2 kHz)
(**) R128(0): *Default mode "640x480": 108.0 MHz (scaled from 25.2 MHz), 31.5 kHz, 59.9 Hz
(II) R128(0): Modeline "640x480"x59.9 108.00 640 688 702 936 480 480 483 496 -hsync -vsync (31.5 kHz)
(==) R128(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) R128(0): Page flipping disabled
(!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfcffc000 - 0xfcffffff (0x4000) MS[B]
[1] 0 0 0xe8000000 - 0xebffffff (0x4000000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[7] -1 0 0xf8ffd800 - 0xf8ffdfff (0x800) MX[B]
[8] -1 0 0xf8ffe000 - 0xf8ffffff (0x2000) MX[B]
[9] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
[10] -1 0 0xfcffc000 - 0xfcffffff (0x4000) MX[B](B)
[11] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[15] 0 0 0x0000cc00 - 0x0000ccff (0x100) IS[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[19] -1 0 0x0000dce0 - 0x0000dcff (0x20) IX[B]
[20] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[21] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B](B)
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) R128(0): Write-combining range (0xe8000000,0x800000)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] loaded kernel module for "r128" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) R128(0): [drm] Using the DRM lock SAREA also for drawables.
(II) R128(0): [drm] framebuffer handle = 0xe8000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): X context handle = 0x1
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [agp] Mode 0x1f000201 [AGP 0x8086/0x1130; Card 0x1002/0x4d46]
(II) R128(0): [agp] 8192 kB allocated with handle 0x00000001
(II) R128(0): [agp] ring handle = 0xe4000000
(II) R128(0): [agp] Ring mapped at 0xb7251000
(II) R128(0): [agp] ring read ptr handle = 0xe4101000
(II) R128(0): [agp] Ring read ptr mapped at 0xb7250000
(II) R128(0): [agp] vertex/indirect buffers handle = 0xe4102000
(II) R128(0): [agp] Vertex/indirect buffers mapped at 0xb677c000
(II) R128(0): [agp] AGP texture map handle = 0xe4302000
(II) R128(0): [agp] AGP Texture map mapped at 0xb629c000
(II) R128(0): [drm] register handle = 0xfcffc000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (800,2416)
(II) R128(0): Reserved area from (0,600) to (800,602)
(II) R128(0): Largest offscreen area available: 800 x 1814
(II) R128(0): Reserved back buffer from (0,602) to (800,1202)
(II) R128(0): Reserved depth buffer from (0,1202) to (800,1803)
(II) R128(0): Reserved depth span from (0,1802) offset 0x57fd00
(II) R128(0): Reserved 640 kb for textures at offset 0x75f800
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
24 128x128 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 7212)
(II) R128(0): Largest offscreen area available: 800 x 610
(II) R128(0): DPMS enabled
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): [drm] dma control initialized, using IRQ 11
(II) R128(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r128_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(WW) Configured Mouse: No Device specified, looking for one...
(II) Configured Mouse: Setting Device option to "/dev/input/mice"
(--) Configured Mouse: Device: "/dev/input/mice"
(==) Configured Mouse: Protocol: "Auto"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "es"
(**) Generic Keyboard: XkbLayout: "es"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
-- System Information:
Debian Release: 5.0.8
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=es_VE.UTF-8, LC_CTYPE=es_VE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg-video-r128 depends on:
ii libc6 2.7-18lenny7 GNU C Library: Shared libraries
ii xserver-xorg-core 2:1.4.2-10.lenny3 Xorg X server - core server
xserver-xorg-video-r128 recommends no packages.
xserver-xorg-video-r128 suggests no packages.
-- no debconf information
--- End Message ---