Your message dated Fri, 28 Jan 2011 14:59:29 +0000 with message-id <20110128145929.GB29998@crustytoothpaste.ath.cx> and subject line Re: Bug#559373: xserver-xorg-core: black screen after logout after resume has caused the Debian Bug report #559373, regarding xserver-xorg-core: black screen after logout after resume to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 559373: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=559373 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg-core: black screen after logout after resume
- From: "brian m. carlson" <sandals@crustytoothpaste.ath.cx>
- Date: Thu, 3 Dec 2009 23:09:15 +0000
- Message-id: <20091203230914.GA6437@crustytoothpaste.ath.cx>
Package: xserver-xorg-core Version: 2:1.6.5-1 Severity: important I end up with a black screen (with backlight) and a non-responsive X server (will not change VTs) when: 1. I log into the machine as one user (bmc). 2. I suspend the machine by putting the lid down (handled by gnome-power-manager). 3. I resume the machine[0]. 4. Instead of entering my password at the gnome-screensaver prompt, I click the "Switch user" button. 5. At the gdm prompt, I then log in as another user (bdb). 6. I log out as that user (bdb). I expect that instead, I will get the gnome-screensaver prompt as I did before. Note that the first user (bmc) uses compiz, whilst the second user does not. Also, this behavior occurs both with and without KMS; I currently have it enabled. I'm using the latest xserver-xorg-video-intel, -input-synaptics, and -input-evdev from sid. It also occurred with the X server and evdev and intel drivers from experimental, when those were installable. I can kill the X server using Magic SysRq, and then change VTs. Obviously, that's not at all preferable, since it kills my session. If there's anything you need me to test, please just let me know. [0] Due to a bug in gnome-power-manager (#559171), upon resume, it suspends again; therefore, I must put the lid down and then open it again so that it resumes. -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 May 2 2007 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1868064 Oct 13 09:43 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 1859 Jul 14 11:02 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "Extensions" Option "Composite" "enable" EndSection Section "ServerFlags" Option "DontZap" "false" Option "DontVTSwitch" "false" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "thinkpad60" Option "XkbLayout" "us" Option "XkbOptions" "ctrl:nocaps,terminate:ctrl_alt_bksp" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" EndSection #Section "InputDevice" # Identifier "Synaptics Touchpad" # Driver "synaptics" # Option "SendCoreEvents" "true" # Option "Device" "/dev/psaux" # Option "Protocol" "auto-dev" # Option "HorizScrollDelta" "0" #EndSection Section "Device" Identifier "Configured Video Device" Option "UseFBDev" "true" #Option "AccelMethod" "UXA" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 33168 Dec 3 18:55 /var/log/Xorg.21.log -rw-r--r-- 1 root root 50931 Dec 3 22:41 /var/log/Xorg.20.log -rw-r--r-- 1 root root 17101 Dec 3 22:43 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: X.Org X Server 1.6.5 Release Date: 2009-10-11 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.30-2-amd64 x86_64 Debian Current Operating System: Linux lakeview 2.6.31-1-amd64 #1 SMP Mon Nov 16 04:44:38 UTC 2009 x86_64 Build Date: 13 October 2009 09:39:10AM xorg-server 2:1.6.5-1 (jcristau@debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 3 22:42:51 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Configured Video Device" (**) |-->Input Device "Generic Keyboard" (**) |-->Input Device "Configured Mouse" (**) Option "DontVTSwitch" "false" (**) Option "DontZap" "false" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (**) Extension "Composite" is enabled (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Generic Keyboard (WW) Disabling Configured Mouse (II) Loader magic: 0x3b40 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:27a2:17aa:201a Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xee100000/524288, 0xd0000000/268435456, 0xee200000/262144, I/O @ 0x00001800/8 (WW) Open ACPI failed (/var/run/acpid.socket) (Interrupted system call) (II) No APM support in BIOS or kernel (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (==) Matched intel for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.5, module version = 2.9.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 7, (OK) drmOpenByBusid: drmOpenMinor returns 7 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM (--) intel(0): Chipset: "945GM" (II) intel(0): Output VGA1 using monitor section Configured Monitor (II) intel(0): Output LVDS1 has no monitor section (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 (II) intel(0): Output TV1 has no monitor section (II) intel(0): EDID for output VGA1 (II) intel(0): EDID for output LVDS1 (II) intel(0): Manufacturer: LEN Model: 4040 Serial#: 0 (II) intel(0): Year: 2005 Week: 0 (II) intel(0): EDID Version: 1.3 (II) intel(0): Digital Display Input (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 23 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: StandBy Suspend Off (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.590 redY: 0.342 greenX: 0.319 greenY: 0.540 (II) intel(0): blueX: 0.152 blueY: 0.137 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Supported established timings: (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 65.0 MHz Image Size: 304 x 228 mm (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 54.2 MHz Image Size: 304 x 228 mm (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 (WW) intel(0): Unknown vendor-specific block f (II) intel(0): LTN150XF-L03 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff0030ae404000000000 (II) intel(0): 000f0103801e1778ea2d059757518a27 (II) intel(0): 23505421080001010101010101010101 (II) intel(0): 01010101010164190040410026301888 (II) intel(0): 360030e4100000192815004041002630 (II) intel(0): 1888360030e4100000190000000f0061 (II) intel(0): 43326143280f01004ca35846000000fe (II) intel(0): 004c544e31353058462d4c30330a007a (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions) (II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Printing probed modes for output LVDS1 (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x50.0 54.16 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (40.3 kHz) (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (II) intel(0): EDID for output TV1 (II) intel(0): Output VGA1 disconnected (II) intel(0): Output LVDS1 connected (II) intel(0): Output TV1 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS1 using initial mode 1024x768 (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.5, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) intel(0): [DRI2] Setup complete (**) intel(0): Kernel mode setting active, disabling FBC. (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): No memory allocations (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): direct rendering: DRI2 Enabled (WW) intel(0): Option "UseFBDev" is not used (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 304 x 228 HAL Information (lshal): udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' button.has_state = false (bool) button.type = 'power' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'button', 'input.keys'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Power Button' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string) input.device = '/dev/input/event6' (string) input.product = 'Power Button' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'ctrl:nocaps,terminate:ctrl_alt_bksp' (string) linux.device_file = '/dev/input/event6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Video Bus' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string) input.device = '/dev/input/event2' (string) input.product = 'Video Bus' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'ctrl:nocaps,terminate:ctrl_alt_bksp' (string) linux.device_file = '/dev/input/event2' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input2/event2' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' button.has_state = false (bool) button.type = 'sleep' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'button', 'input.keys'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Sleep Button' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string) input.device = '/dev/input/event8' (string) input.product = 'Sleep Button' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'ctrl:nocaps,terminate:ctrl_alt_bksp' (string) linux.device_file = '/dev/input/event8' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8/event8' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Macintosh mouse button emulation' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string) input.device = '/dev/input/event0' (string) input.product = 'Macintosh mouse button emulation' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ACPI Virtual Keyboard Device' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' (string) input.device = '/dev/input/event13' (string) input.product = 'ACPI Virtual Keyboard Device' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'ctrl:nocaps,terminate:ctrl_alt_bksp' (string) linux.device_file = '/dev/input/event13' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input13/event13' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = '/usr/sbin/thinkpad-keys' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' (string) input.device = '/dev/input/event14' (string) input.product = '/usr/sbin/thinkpad-keys' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'ctrl:nocaps,terminate:ctrl_alt_bksp' (string) linux.device_file = '/dev/input/event14' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input14/event14' (string) udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_6' button.has_state = true (bool) button.state.value = true (bool) button.type = 'radio' (string) info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keys', 'input.switch', 'button', 'input.keymap'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'ThinkPad Extra Buttons' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_6' (string) input.device = '/dev/input/event9' (string) input.keymap.data = {'0x01:screenlock', '0x02:battery', '0x03:sleep', '0x04:wlan', '0x06:switchvideomode', '0x07:f22', '0x08:f24', '0x0b:suspend', '0x0f:brightnessup', '0x10:brightnessdown', '0x11:kbdillumtoggle', '0x13:zoom', '0x14:volumeup', '0x15:volumedown', '0x16:mute', '0x17:prog1'} (string list) input.product = 'ThinkPad Extra Buttons' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'ctrl:nocaps,terminate:ctrl_alt_bksp' (string) linux.device_file = '/dev/input/event9' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/virtual/input/input9/event9' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_Synaptics_pass_through_logicaldev_input' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_Synaptics_pass_through' (string) info.product = 'TPPS/2 IBM TrackPoint' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_Synaptics_pass_through_logicaldev_input' (string) input.device = '/dev/input/event12' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_Synaptics_pass_through' (string) input.product = 'TPPS/2 IBM TrackPoint' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event12' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1/serio2/input/input19/event12' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' info.capabilities = {'input', 'input.touchpad'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) info.product = 'SynPS/2 Synaptics TouchPad' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string) input.device = '/dev/input/event10' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string) input.product = 'SynPS/2 Synaptics TouchPad' (string) input.x11_driver = 'synaptics' (string) linux.device_file = '/dev/input/event10' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input10/event10' (string) udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) info.product = 'AT Translated Set 2 keyboard' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string) input.device = '/dev/input/event1' (string) input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string) input.product = 'AT Translated Set 2 keyboard' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'ctrl:nocaps,terminate:ctrl_alt_bksp' (string) linux.device_file = '/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input1/event1' (string) udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0_logicaldev_input' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0' (string) info.product = 'Logitech USB Optical Mouse' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event3' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0' (string) input.product = 'Logitech USB Optical Mouse' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event3' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3/event3' (string) udi = '/org/freedesktop/Hal/devices/usb_device_a5c_4502_noserial_if0_logicaldev_input' info.addons.singleton = {'hald-addon-input'} (string list) info.callouts.add = {'debian-setup-keyboard'} (string list) info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_a5c_4502_noserial_if0' (string) info.product = 'HID 0a5c:4502' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_a5c_4502_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event4' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_a5c_4502_noserial_if0' (string) input.product = 'HID 0a5c:4502' (string) input.x11_driver = 'evdev' (string) input.xkb.layout = 'us' (string) input.xkb.model = 'pc105' (string) input.xkb.options = 'ctrl:nocaps,terminate:ctrl_alt_bksp' (string) linux.device_file = '/dev/input/event4' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input17/event4' (string) udi = '/org/freedesktop/Hal/devices/usb_device_a5c_4503_noserial_if0_logicaldev_input' info.capabilities = {'input', 'input.mouse'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_a5c_4503_noserial_if0' (string) info.product = 'HID 0a5c:4503' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_a5c_4503_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event5' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_a5c_4503_noserial_if0' (string) input.product = 'HID 0a5c:4503' (string) input.x11_driver = 'evdev' (string) linux.device_file = '/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.2/2-2.2:1.0/input/input18/event5' (string) DRM Information from dmesg: [ 0.000000] No AGP bridge found [ 0.531913] Linux agpgart interface v0.103 [ 0.786711] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 0.787837] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 0.793144] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 32.069032] [drm] Initialized drm 1.1.0 20060810 [ 32.662237] [drm] TV-18: set mode NTSC 480i 0 [ 32.786327] [drm] fb0: inteldrmfb frame buffer device [ 32.786336] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 32.848720] [drm] LVDS-8: set mode 1024x768 c [ 33.166151] [drm] TV-18: set mode NTSC 480i 0 [ 33.309779] [drm] TV-18: set mode NTSC 480i 0 [ 33.611947] [drm] TV-18: set mode NTSC 480i 0 [ 33.771953] [drm] TV-18: set mode NTSC 480i 0 [ 69.603048] [drm] TV-18: set mode NTSC 480i 0 [ 69.742210] [drm] TV-18: set mode NTSC 480i 0 [ 70.025718] [drm] TV-18: set mode NTSC 480i 0 [ 70.165900] [drm] TV-18: set mode NTSC 480i 0 [ 70.440784] [drm] TV-18: set mode NTSC 480i 0 [ 70.580867] [drm] TV-18: set mode NTSC 480i 0 [ 74.651497] [drm] TV-18: set mode NTSC 480i 0 [ 74.791593] [drm] TV-18: set mode NTSC 480i 0 [ 103.213030] [drm] TV-18: set mode NTSC 480i 0 [ 103.353657] [drm] TV-18: set mode NTSC 480i 0 [ 1713.615056] [drm] TV-18: set mode NTSC 480i 0 [ 1713.758189] [drm] TV-18: set mode NTSC 480i 0 [ 1714.037545] [drm] TV-18: set mode NTSC 480i 0 [ 1714.180947] [drm] TV-18: set mode NTSC 480i 0 [ 1724.702568] [drm] TV-18: set mode NTSC 480i 0 [ 1724.843310] [drm] TV-18: set mode NTSC 480i 0 [ 1725.124964] [drm] TV-18: set mode NTSC 480i 0 [ 1725.269606] [drm] TV-18: set mode NTSC 480i 0 [ 1725.549059] [drm] TV-18: set mode NTSC 480i 0 [ 1725.689918] [drm] TV-18: set mode NTSC 480i 0 [ 1781.739170] [drm] LVDS-8: set mode 1024x768 c [ 1792.715315] [drm] LVDS-8: set mode 1024x768 c [ 1796.449045] [drm] TV-18: set mode NTSC 480i 0 [ 1796.591612] [drm] TV-18: set mode NTSC 480i 0 [ 1796.875382] [drm] TV-18: set mode NTSC 480i 0 [ 1797.021445] [drm] TV-18: set mode NTSC 480i 0 [ 1806.484024] [drm] TV-18: set mode NTSC 480i 0 [ 1806.629783] [drm] TV-18: set mode NTSC 480i 0 [ 1806.908017] [drm] TV-18: set mode NTSC 480i 0 [ 1807.052123] [drm] TV-18: set mode NTSC 480i 0 [ 1815.251369] [drm] TV-18: set mode NTSC 480i 0 [ 1815.391795] [drm] TV-18: set mode NTSC 480i 0 [ 1815.702004] [drm] TV-18: set mode NTSC 480i 0 [ 1815.843193] [drm] TV-18: set mode NTSC 480i 0 [ 1816.141350] [drm] TV-18: set mode NTSC 480i 0 [ 1816.281759] [drm] TV-18: set mode NTSC 480i 0 [ 1859.999570] [drm] TV-18: set mode NTSC 480i 0 [ 1860.139531] [drm] TV-18: set mode NTSC 480i 0 [ 1860.411747] [drm] TV-18: set mode NTSC 480i 0 [ 1860.551701] [drm] TV-18: set mode NTSC 480i 0 [ 1875.047559] [drm] TV-18: set mode NTSC 480i 0 [ 1875.187678] [drm] TV-18: set mode NTSC 480i 0 [ 1875.463782] [drm] TV-18: set mode NTSC 480i 0 [ 1875.603812] [drm] TV-18: set mode NTSC 480i 0 [ 1890.071512] [drm] TV-18: set mode NTSC 480i 0 [ 1890.211599] [drm] TV-18: set mode NTSC 480i 0 [ 1890.483750] [drm] TV-18: set mode NTSC 480i 0 [ 1890.623780] [drm] TV-18: set mode NTSC 480i 0 -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.31-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg-core depends on: ii libaudit0 1.7.13-1 Dynamic library for security audit ii libc6 2.10.2-2 GNU C Library: Shared libraries ii libdbus-1-3 1.2.16-2 simple interprocess messaging syst ii libdrm2 2.4.15-1 Userspace interface to kernel DRM ii libfontenc1 1:1.0.5-1 X11 font encoding library ii libgcrypt11 1.4.4-6 LGPL Crypto library - runtime libr ii libhal1 0.5.13-6 Hardware Abstraction Layer - share ii libpciaccess0 0.10.9-1 Generic PCI access library for X ii libpixman-1-0 0.16.2-1 pixel-manipulation library for X a ii libselinux1 2.0.89-4 SELinux runtime shared libraries ii libxau6 1:1.0.5-1 X11 authorisation library ii libxdmcp6 1:1.0.3-1 X11 Display Manager Control Protoc ii libxfont1 1:1.4.1-1 X11 font rasterisation library ii xserver-common 2:1.7.0-1 common files used by various X ser ii xserver-xorg 1:7.4+4 the X.Org X server Versions of packages xserver-xorg-core recommends: ii libgl1-mesa-dri 7.6-1 A free implementation of the OpenG ii xkb-data 1.7-1 X Keyboard Extension (XKB) configu Versions of packages xserver-xorg-core suggests: ii xfonts-100dpi 1:1.0.0-4 100 dpi fonts for X ii xfonts-75dpi 1:1.0.0-4 75 dpi fonts for X ii xfonts-base 1:1.0.0-6 standard fonts for X ii xfonts-scalable 1:1.0.0-7 scalable fonts for X -- no debconf information -- brian m. carlson / brian with sandals: Houston, Texas, US +1 713 440 7475 | http://crustytoothpaste.ath.cx/~bmc | My opinion only OpenPGP: RSA v4 4096b 88AC E9B2 9196 305B A994 7552 F1BA 225C 0223 B187Attachment: signature.asc
Description: Digital signature
--- End Message ---
--- Begin Message ---
- To: Cyril Brulebois <kibi@debian.org>
- Cc: 559373-done@bugs.debian.org
- Subject: Re: Bug#559373: xserver-xorg-core: black screen after logout after resume
- From: "brian m. carlson" <sandals@crustytoothpaste.net>
- Date: Fri, 28 Jan 2011 14:59:29 +0000
- Message-id: <20110128145929.GB29998@crustytoothpaste.ath.cx>
- In-reply-to: <[🔎] 20110128122206.GA6986@debian.org>
- References: <20091203230914.GA6437@crustytoothpaste.ath.cx> <[🔎] 20110128122206.GA6986@debian.org>
On Fri, Jan 28, 2011 at 01:22:06PM +0100, Cyril Brulebois wrote: > brian m. carlson <sandals@crustytoothpaste.ath.cx> (03/12/2009): > > I end up with a black screen (with backlight) and a non-responsive X > > server (will not change VTs) when: […] > > still an issue with the X stack from squeeze/sid or from experimental? Nope. Works for me now. -- brian m. carlson / brian with sandals: Houston, Texas, US +1 832 623 2791 | http://www.crustytoothpaste.net/~bmc | My opinion only OpenPGP: RSA v4 4096b: 88AC E9B2 9196 305B A994 7552 F1BA 225C 0223 B187Attachment: signature.asc
Description: Digital signature
--- End Message ---