thanks to jcristau and zwenna on #debian-x, i was able to figure out a workaround for this machine. I installed kernel 2.6.37 from experimental (2.6.37-1~experimental.1), and i added a kernel boot parameter "video=nvidiafb:off" (i'm using yaboot, so this went into a line in /etc/yaboot.conf: append=video=nvidiafb:off The dmesg from the resulting boot is attached. i now get a clean handoff to nouveaufb (/proc/fb shows "0 nouveaufb"), and as an extra bonus the machine detects and uses 1280x960 resolution instead of the crappier 1024x768 i was getting earlier. --dkg
[ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 256MB; using 512kB for hash table (at cff80000) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37-trunk-powerpc (Debian 2.6.37-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-6) ) #1 Thu Jan 6 15:21:31 UTC 2011 [ 0.000000] Found initrd at 0xc1d00000:0xc2874000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x11 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0xff740000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: eMac [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=504, gen1=503 [ 0.000000] nvram: Active bank is: 0 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x10000000, Total RAM: 0x10000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00010000 [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00010000 [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c05768ec, node_mem_map c070e000 [ 0.000000] DMA zone: 512 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 65024 pages, LIFO batch:15 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: root=/dev/hda3 ro video=nvidiafb:off [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] High memory: 0k [ 0.000000] Memory: 240296k/262144k available (5376k kernel code, 21848k reserved, 288k data, 1506k bss, 260k init) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffcf000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfde72000..0xff800000 : early ioremap [ 0.000000] * 0xd1000000..0xfde72000 : vmalloc & ioremap [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:512 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] irq: irq 55 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 55 [ 0.000000] GMT Delta read from XPRAM: -240 minutes, DST: on [ 0.000000] time_init: decrementer frequency = 24.913165 MHz [ 0.000000] time_init: processor frequency = 700.000000 MHz [ 0.000000] clocksource: timebase mult[a08ec43] shift[22] registered [ 0.000000] clockevent: decrementer mult[660b58c] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22 [ 0.000000] irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23 [ 0.001204] pid_max: default: 32768 minimum: 301 [ 0.001277] Security Framework initialized [ 0.001306] SELinux: Disabled at boot. [ 0.001351] Mount-cache hash table entries: 512 [ 0.001794] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" [ 0.004417] Initializing cgroup subsys ns [ 0.004440] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004464] Initializing cgroup subsys cpuacct [ 0.004486] Initializing cgroup subsys devices [ 0.004501] Initializing cgroup subsys freezer [ 0.004515] Initializing cgroup subsys net_cls [ 0.004529] Initializing cgroup subsys blkio [ 0.005911] devtmpfs: initialized [ 0.006659] regulator: core version 0.5 [ 0.006855] regulator: dummy: [ 0.007006] NET: Registered protocol family 16 [ 0.007864] MPC7450 family performance monitor hardware support registered [ 0.007955] irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42 [ 0.008014] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.008038] channel 0 bus <multibus> [ 0.008053] channel 1 bus <multibus> [ 0.008095] irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26 [ 0.008149] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.008173] channel 0 bus <multibus> [ 0.008212] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.008236] channel 1 bus <multibus> [ 0.008255] channel 2 bus <multibus> [ 0.008398] irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25 [ 0.008441] irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47 [ 0.008608] PCI: Probing PCI hardware [ 0.008812] pci 0000:00:0b.0: [106b:002d] type 0 class 0x000600 [ 0.008922] pci 0000:00:10.0: [10de:0110] type 0 class 0x000300 [ 0.008950] pci 0000:00:10.0: reg 10: [mem 0x91000000-0x91ffffff] [ 0.008966] pci 0000:00:10.0: reg 14: [mem 0x98000000-0x9fffffff pref] [ 0.009003] pci 0000:00:10.0: reg 30: [mem 0x90000000-0x9000ffff pref] [ 0.009104] irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48 [ 0.009444] pci 0001:10:0b.0: [106b:002e] type 0 class 0x000600 [ 0.009536] pci 0001:10:17.0: [106b:0022] type 0 class 0x00ff00 [ 0.009556] pci 0001:10:17.0: reg 10: [mem 0x80000000-0x8007ffff] [ 0.009631] pci 0001:10:18.0: [106b:0019] type 0 class 0x000c03 [ 0.009651] pci 0001:10:18.0: reg 10: [mem 0x80081000-0x80081fff] [ 0.009725] pci 0001:10:19.0: [106b:0019] type 0 class 0x000c03 [ 0.009745] pci 0001:10:19.0: reg 10: [mem 0x80080000-0x80080fff] [ 0.009853] irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27 [ 0.009889] irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28 [ 0.010398] pci 0002:20:0b.0: [106b:002f] type 0 class 0x000600 [ 0.010481] pci 0002:20:0e.0: [11c1:5811] type 0 class 0x000c00 [ 0.010504] pci 0002:20:0e.0: reg 10: [mem 0xf5000000-0xf5000fff] [ 0.010558] pci 0002:20:0e.0: supports D1 D2 [ 0.010568] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.010579] pci 0002:20:0e.0: PME# disabled [ 0.010610] pci 0002:20:0f.0: [106b:0021] type 0 class 0x000200 [ 0.010628] pci 0002:20:0f.0: reg 10: [mem 0xf5200000-0xf53fffff] [ 0.010669] pci 0002:20:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref] [ 0.010743] irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40 [ 0.010775] irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41 [ 0.011171] pci_bus 0000:00: resource 0 [io 0x802000-0x1001fff] [ 0.011183] pci_bus 0000:00: resource 1 [mem 0xf1000000-0xf1ffffff] [ 0.011193] pci_bus 0000:00: resource 2 [mem 0x90000000-0xafffffff] [ 0.011204] pci_bus 0001:10: resource 0 [io 0x0000-0x7fffff] [ 0.011214] pci_bus 0001:10: resource 1 [mem 0xf3000000-0xf3ffffff] [ 0.011224] pci_bus 0001:10: resource 2 [mem 0x80000000-0x8fffffff] [ 0.011235] pci_bus 0002:20: resource 0 [io 0xff7fe000-0xffffdfff] [ 0.011245] pci_bus 0002:20: resource 1 [mem 0xf5000000-0xf5ffffff] [ 0.013969] bio: create slab <bio-0> at 0 [ 0.014420] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.014468] vgaarb: loaded [ 0.014944] Switching to clocksource timebase [ 0.026534] NET: Registered protocol family 2 [ 0.026761] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.027419] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027723] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.027882] TCP: Hash tables configured (established 8192 bind 8192) [ 0.027906] TCP reno registered [ 0.027925] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.027964] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.028218] NET: Registered protocol family 1 [ 0.028326] PCI: CLS mismatch (32 != 1020), using 32 bytes [ 0.028501] Unpacking initramfs... [ 0.836731] Freeing initrd memory: 11728k freed [ 0.838663] Thermal assist unit not available [ 0.839647] audit: initializing netlink socket (disabled) [ 0.839717] type=2000 audit(1294713108.836:1): initialized [ 0.885221] VFS: Disk quotas dquot_6.5.2 [ 0.885470] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.885620] msgmni has been set to 494 [ 0.886314] alg: No test for stdrng (krng) [ 0.886577] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.886614] io scheduler noop registered [ 0.886631] io scheduler deadline registered [ 0.886681] io scheduler cfq registered (default) [ 0.887501] Using unsupported 1024x768 NVDA,Display-A at 98004000, depth=8, pitch=1024 [ 0.900646] Console: switching to colour frame buffer device 128x48 [ 0.912295] fb0: Open Firmware frame buffer device on /pci@f0000000/NVDA,Parent@10/NVDA,Display-A@0 [ 0.912914] Generic non-volatile memory driver v1.1 [ 0.913170] Linux agpgart interface v0.103 [ 0.913333] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 1.5 chipset [ 0.915244] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 0.915574] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 0.915864] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.916761] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>) [ 0.916988] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port [ 0.917349] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port [ 0.917701] Serial: MPC52xx PSC UART driver [ 0.917945] MacIO PCI driver attached to Keylargo chipset [ 0.918747] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32 [ 0.919180] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19 [ 0.919206] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16 [ 0.919376] irq: irq 20 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20 [ 0.919400] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17 [ 0.919540] irq: irq 21 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21 [ 0.919564] irq: irq 13 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18 [ 0.919706] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24 [ 0.919729] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29 [ 0.919931] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 [ 0.919955] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31 [ 0.920830] Uniform Multi-Platform E-IDE driver [ 0.921423] adb: starting probe task... [ 0.921550] adb: finished probe task... [ 1.938985] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19 [ 1.939235] Probing IDE interface ide0... [ 2.255314] hda: Maxtor 4D040H2, ATA DISK drive [ 2.927207] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.927332] hda: UDMA/66 mode selected [ 2.932149] ide0 at 0xd1076000-0xd1076070,0xd1076160 on irq 19 [ 3.955010] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 20 [ 3.959740] Probing IDE interface ide1... [ 4.359194] hdc: LG CD-ROM CRD-8484B, ATAPI CD/DVD-ROM drive [ 5.035197] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.035352] hdc: MWDMA2 mode selected [ 5.040175] ide1 at 0xd107a000-0xd107a070,0xd107a160 on irq 20 [ 6.063029] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 1, irq 21 [ 6.067829] Probing IDE interface ide2... [ 6.635217] ide2 at 0xd1142000-0xd1142070,0xd1142160 on irq 21 [ 6.640038] ide-gd driver 1.18 [ 6.644832] hda: max request size: 128KiB [ 6.663165] hda: 80022600 sectors (40971 MB) w/2048KiB Cache, CHS=65535/16/63 [ 6.668019] hda: cache flushes not supported [ 6.684213] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 [ 6.690466] mice: PS/2 mouse device common for all mice [ 6.695623] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 6.701430] TCP cubic registered [ 6.706820] NET: Registered protocol family 10 [ 6.712843] lo: Disabled Privacy Extensions [ 6.718399] Mobile IPv6 [ 6.723113] NET: Registered protocol family 17 [ 6.727857] Registering the dns_resolver key type [ 6.733107] PM: Hibernation image not present or could not be loaded. [ 6.733167] registered taskstats version 1 [ 6.738442] input: PMU as /devices/virtual/input/input0 [ 6.743523] rtc-generic rtc-generic: setting system clock to 2011-01-10 22:31:55 UTC (1294698715) [ 6.748417] Initalizing network drop monitor service [ 6.753415] Freeing unused kernel memory: 260k init [ 6.855401] udev[41]: starting version 164 [ 7.265720] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) [ 7.455419] sungem_phy: PHY ID: 4061e4, addr: 0 [ 7.457834] gem 0002:20:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:ab:69:a8 [ 7.462838] gem 0002:20:0f.0: eth0: Found BCM5221 PHY [ 7.479132] ide-cd driver 5.00 [ 7.501094] ide-cd: hdc: ATAPI 52X CD-ROM drive, 128kB Cache [ 7.506011] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.571623] usbcore: registered new interface driver usbfs [ 7.583182] usbcore: registered new interface driver hub [ 7.592753] usbcore: registered new device driver usb [ 7.603326] firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 [ 7.638183] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.662375] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.669075] ohci_hcd 0001:10:18.0: enabling device (0000 -> 0002) [ 7.675238] ohci_hcd 0001:10:18.0: OHCI Host Controller [ 7.680248] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1 [ 7.685738] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000 [ 7.763362] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.768368] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.773171] usb usb1: Product: OHCI Host Controller [ 7.777918] usb usb1: Manufacturer: Linux 2.6.37-trunk-powerpc ohci_hcd [ 7.782702] usb usb1: SerialNumber: 0001:10:18.0 [ 7.790365] hub 1-0:1.0: USB hub found [ 7.795581] hub 1-0:1.0: 2 ports detected [ 7.800712] ohci_hcd 0001:10:19.0: enabling device (0000 -> 0002) [ 7.805487] ohci_hcd 0001:10:19.0: OHCI Host Controller [ 7.810147] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2 [ 7.815810] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000 [ 7.894816] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.899571] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.904178] usb usb2: Product: OHCI Host Controller [ 7.908700] usb usb2: Manufacturer: Linux 2.6.37-trunk-powerpc ohci_hcd [ 7.913298] usb usb2: SerialNumber: 0001:10:19.0 [ 7.919921] hub 2-0:1.0: USB hub found [ 7.924774] hub 2-0:1.0: 2 ports detected [ 8.107453] firewire_core: created device fw0: GUID 000393fffeab69a8, S400 [ 8.157379] device-mapper: uevent: version 1.0.3 [ 8.165052] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com [ 8.191565] usb 1-2: new full speed USB device using ohci_hcd and address 2 [ 8.302022] EXT3-fs: barriers not enabled [ 8.315544] kjournald starting. Commit interval 5 seconds [ 8.320454] EXT3-fs (hda3): mounted filesystem with ordered data mode [ 8.402154] usb 1-2: New USB device found, idVendor=05ac, idProduct=1002 [ 8.402169] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.402179] usb 1-2: Product: Hub in Apple Extended USB Keyboard [ 8.402187] usb 1-2: Manufacturer: Mitsumi Electric [ 8.404294] hub 1-2:1.0: USB hub found [ 8.406135] hub 1-2:1.0: 3 ports detected [ 8.720120] usb 1-2.1: new full speed USB device using ohci_hcd and address 3 [ 8.834104] usb 1-2.1: New USB device found, idVendor=05ac, idProduct=0204 [ 8.839150] usb 1-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 8.844106] usb 1-2.1: Product: Apple Extended USB Keyboard [ 8.848952] usb 1-2.1: Manufacturer: Mitsumi Electric [ 9.863225] gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex [ 10.123376] udev[167]: starting version 164 [ 10.630333] PowerMac i2c bus pmu 2 registered [ 10.752829] PowerMac i2c bus pmu 1 registered [ 10.819793] PowerMac i2c bus mac-io 0 registered [ 10.921789] PowerMac i2c bus uni-n 1 registered [ 10.973024] PowerMac i2c bus uni-n 0 registered [ 11.042277] [drm] Initialized drm 1.1.0 20060810 [ 11.280098] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:18.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input1 [ 11.325853] generic-usb 0003:05AC:0204.0001: input,hidraw0: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:18.0-2.1/input0 [ 11.367860] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:18.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input2 [ 11.384125] generic-usb 0003:05AC:0204.0002: input,hidraw1: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:18.0-2.1/input1 [ 11.403277] usbcore: registered new interface driver usbhid [ 11.409455] usbhid: USB HID core driver [ 11.752305] [drm] nouveau 0000:00:10.0: Detected an NV10 generation card (0x011000b2) [ 11.759312] checking generic (98004000 c0000) vs hw (98000000 8000000) [ 11.759326] fb: conflicting fb hw usage nouveaufb vs OFfb NVDA,Displ - removing generic driver [ 11.765486] Console: switching to colour dummy device 80x25 [ 11.767806] Trying to free nonexistent resource <0000000098004000-00000000980c3fff> [ 11.768000] [drm] nouveau 0000:00:10.0: OF bios successfully copied (2071 bytes) [ 11.768289] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PRAMIN [ 11.813918] [drm] nouveau 0000:00:10.0: ... BIOS checksum invalid [ 11.813946] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PROM [ 11.813979] [drm] nouveau 0000:00:10.0: ... BIOS signature not found [ 11.814000] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from PCIROM [ 11.815255] [drm] nouveau 0000:00:10.0: ... BIOS signature not found [ 11.815296] [drm] nouveau 0000:00:10.0: Attempting to load BIOS image from ACPI [ 11.815323] [drm] nouveau 0000:00:10.0: ... BIOS signature not found [ 11.815344] [drm] nouveau 0000:00:10.0: Using BIOS image from PRAMIN [ 11.861882] [drm] nouveau 0000:00:10.0: BMP BIOS found [ 11.861909] [drm] nouveau 0000:00:10.0: BMP version 5.16 [ 11.861932] [drm] nouveau 0000:00:10.0: Bios version 03.11.00.15 [ 11.861955] [drm] nouveau 0000:00:10.0: No output data (DCB) found in BIOS [ 11.861976] [drm] nouveau 0000:00:10.0: Assuming a CRT output exists [ 11.867771] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 0 at offset 0x010B [ 11.867843] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 1 at offset 0x0692 [ 11.867883] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 2 at offset 0x06AC [ 11.935069] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 3 at offset 0x0126 [ 11.935113] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 4 at offset 0x01A6 [ 11.935179] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 5 at offset 0x077E [ 11.948841] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 6 at offset 0x0639 [ 11.948905] [drm] nouveau 0000:00:10.0: Parsing VBIOS init table 7 at offset 0x0154 [ 12.503075] [drm] nouveau 0000:00:10.0: 0 available performance level(s) [ 12.503143] [drm] nouveau 0000:00:10.0: c: memory 332MHz core 175MHz [ 12.503193] [drm] nouveau 0000:00:10.0: Detected 32MiB VRAM [ 12.503371] [TTM] Zone kernel: Available graphics memory: 126652 kiB. [ 12.503398] [TTM] Initializing pool allocator. [ 12.508394] [drm] nouveau 0000:00:10.0: 64 MiB GART (aperture) [ 12.510714] [drm] nouveau 0000:00:10.0: Allocating FIFO number 0 [ 12.511015] [drm] nouveau 0000:00:10.0: nouveau_channel_alloc: initialised FIFO 0 [ 12.511305] [drm] nouveau 0000:00:10.0: Setting dpms mode 3 on vga encoder (output 0) [ 12.627426] [drm] nouveau 0000:00:10.0: allocated 1280x960 fb: 0x48000, bo ceddf400 [ 12.693022] [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on vga encoder (output 0) [ 12.693037] [drm] nouveau 0000:00:10.0: Output VGA-1 is running on CRTC 0 using output A [ 12.693761] Console: switching to colour frame buffer device 160x60 [ 12.696213] fb0: nouveaufb frame buffer device [ 12.696246] drm: registered panic notifier [ 12.696298] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:10.0 on minor 0 [ 14.747731] EXT3-fs (hda3): using internal journal [ 31.556168] EXT3-fs: barriers not enabled [ 31.568620] kjournald starting. Commit interval 5 seconds [ 31.568950] EXT3-fs (dm-2): using internal journal [ 31.569011] EXT3-fs (dm-2): mounted filesystem with ordered data mode [ 31.592923] EXT3-fs: barriers not enabled [ 31.605075] kjournald starting. Commit interval 5 seconds [ 31.605391] EXT3-fs (dm-1): using internal journal [ 31.605449] EXT3-fs (dm-1): mounted filesystem with ordered data mode [ 31.619653] EXT3-fs: barriers not enabled [ 31.638655] kjournald starting. Commit interval 5 seconds [ 31.640547] EXT3-fs (dm-0): using internal journal [ 31.642103] EXT3-fs (dm-0): mounted filesystem with ordered data mode [ 33.314460] gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex [ 33.315950] gem 0002:20:0f.0: eth0: Pause is disabled [ 37.966429] fuse init (API version 7.15) [ 43.587148] eth0: no IPv6 routers present [ 44.624609] lp: driver loaded but no devices found [ 46.346511] [drm] nouveau 0000:00:10.0: Setting dpms mode 1 on vga encoder (output 0) [ 48.824597] sshd (995): /proc/995/oom_adj is deprecated, please use /proc/995/oom_score_adj instead. [ 49.055302] [drm] nouveau 0000:00:10.0: Setting dpms mode 0 on vga encoder (output 0) [ 347.794152] usb 1-2: USB disconnect, address 2 [ 347.794170] usb 1-2.1: USB disconnect, address 3 [ 356.374481] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 356.875063] firewire_core: created device fw1: GUID 000393fffecf1fc2, S400 [ 379.615019] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 380.923778] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [ 381.423101] firewire_core: refreshed device fw1 [ 381.561353] SCSI subsystem initialized [ 381.595703] scsi0 : SBP-2 IEEE-1394 [ 382.960624] firewire_core: Unsolicited response (source ffc0, tlabel 35) [ 396.792368] firewire_sbp2: fw1.0: orb reply timed out, rcode=0x11 [ 396.992616] firewire_sbp2: fw1.0: logged in to LUN 0000 (1 retries) [ 396.993359] scsi 0:0:0:0: Direct-Access-RBC AAPL FireWire Target 0000 PQ: 0 ANSI: 3 [ 397.070504] sd 0:0:0:0: [sda] 19941264 512-byte logical blocks: (10.2 GB/9.50 GiB) [ 397.070809] sd 0:0:0:0: [sda] Write Protect is off [ 397.070824] sd 0:0:0:0: [sda] Mode Sense: 10 00 00 00 [ 397.071259] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 397.076809] sda: [mac] sda1 sda2 sda3 sda4 [ 397.079231] sd 0:0:0:0: [sda] Attached SCSI disk [ 403.862511] EXT3-fs: barriers not enabled [ 403.880935] kjournald starting. Commit interval 5 seconds [ 403.881987] EXT3-fs (sda4): using internal journal [ 403.882005] EXT3-fs (sda4): mounted filesystem with ordered data mode
Attachment:
signature.asc
Description: OpenPGP digital signature