[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#579425: full dmesg boot messages



[trying to keep the relevant parts from X log and dmesg]

On Tue, Apr 27, 2010 at 23:32:46 -0400, Stefan Monnier wrote:

> X.Org X Server 1.7.6
> Release Date: 2010-03-17
> X Protocol Version 11, Revision 0
> Build Operating System: Linux 2.6.32.11-dsa-ia32 i686 Debian
> Current Operating System: Linux pastel 2.6.33-2-686-bigmem #1 SMP Mon Mar 1 06:59:58 UTC 2010 i686
> Kernel command line: root=/dev/mapper/Pastel-root vga=0x307 ro 

It might be worth trying without the vga= option, and with either the
2.6.33-1~experimental.5 kernel from experimental, or 2.6.32-12 from
unstable.

> (II) NOUVEAU(0): Loaded DRI module
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: drmOpenMinor returns 11
> drmOpenByBusid: drmGetBusid reports 

So GetBusid reports garbage...

[...]
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmGetBusid returned ''
> (II) [drm] DRM interface version 1.0
> (EE) [drm] Could not set DRM device bus ID.
> (EE) NOUVEAU(0): [drm] error opening the drm
> (EE) NOUVEAU(0): 619: 
> (II) UnloadModule: "nouveau"
> (II) UnloadModule: "dri"
> (EE) Screen(s) found, but none have a usable configuration.
> 
This is quite weird...


> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Linux version 2.6.33-2-686-bigmem (Debian 2.6.33-1~experimental.2) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Mon Mar 1 06:59:58 UTC 2010
[...]
> [    9.255420] nouveau 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
> [    9.259818] nouveau 0000:01:00.0: setting latency timer to 64
> [    9.262251] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x044100a2)
> [    9.267142] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
> [    9.474428] [drm] nouveau 0000:01:00.0: ... appears to be valid
> [    9.478555] [drm] nouveau 0000:01:00.0: BIT BIOS found
> [    9.482564] [drm] nouveau 0000:01:00.0: Bios version 05.44.02.11
> [    9.486543] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
> [    9.490477] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
> [    9.494461] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 6 2
> [    9.498416] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01010310 00000028
> [    9.502365] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000000
> [    9.506187] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 020203f1 0000c020
> [    9.509889] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEBC4
> [    9.513662] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xEE99
> [    9.573221] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF2D1
> [    9.576606] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF42E
> [    9.584133] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF4DC
> [    9.597546] [TTM] Zone  kernel: Available graphics memory: 431094 kiB.
> [    9.600783] [TTM] Zone highmem: Available graphics memory: 2073562 kiB.
> [    9.604080] [drm] nouveau 0000:01:00.0: 16 MiB VRAM
> [    9.608684] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
> [    9.612400] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
> [    9.613860] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
> [    9.614732] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
> [    9.615654] [drm] nouveau 0000:01:00.0: Detected a VGA connector
> [    9.616560] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
> [    9.617424] [drm] nouveau 0000:01:00.0: Detected a TV connector
> [    9.619883] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
> [    9.620678] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
> [    9.621480] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
> [    9.776317] [drm] nouveau 0000:01:00.0: allocated 1600x1200 fb: 0x49000, bo f69ca200
> [    9.777110] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
> [    9.777890] Console: switching to colour dummy device 80x25
> [    9.778172] Console: switching to colour frame buffer device 200x75
> [    9.788494] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
> [    9.788498] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
> [    9.795393] fb0: nouveaufb frame buffer device
> [    9.795427] registered panic notifier
> [    9.795461] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[...]
> [   42.805017] ------------[ cut here ]------------
> [   42.805716] WARNING: at /build/buildd-linux-2.6_2.6.33-1~experimental.2-i386-6fF66g/linux-2.6-2.6.33/debian/build/source_i386_none/net/sched/sch_generic.c:255 dev_watchdog+0xbd/0x15a()
> [   42.808368] Hardware name: System Product Name
> [   42.811037] NETDEV WATCHDOG: eth-usb (cdc_subset): transmit queue 0 timed out
> [   42.813929] Modules linked in: sco bridge stp rfcomm bnep l2cap crc16 bluetooth rfkill xt_state ppdev lp autofs4 powernow_k8 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables ppp_async crc_ccitt ppp_generic slhc usbhid hid fuse snd_wavefront snd_cs4236 snd_wss_lib snd_intel8x0 snd_opl3_lib snd_ac97_codec snd_hwdep snd_mpu401 snd_mpu401_uart ac97_bus snd_pcm_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_mixer_oss nouveau ttm drm_kms_helper cdc_ether snd_pcm snd_seq i2c_nforce2 drm cdc_subset usbnet agpgart mii i2c_algo_bit snd_seq_device parport_pc snd_timer ns558 snd_page_alloc k8temp parport tpm_tis tpm gameport i2c_core asus_atk0110 tpm_bios processor pcspkr evdev snd serio_raw soundcore ext3 jbd mbcache dm_mod sg sr_mod cdrom usb_storage sd_mod crc_t10dif ata_generic ohci_h
>  cd firewire_ohci firewire_core crc_itu_t sata_nv skge floppy ehci_hcd pata_amd button libata usbcore nls_base scsi_mod forcedeth thermal fan thermal_sys [last unloaded: hid]
> [   42.833527] Pid: 0, comm: swapper Not tainted 2.6.33-2-686-bigmem #1
> [   42.836899] Call Trace:
> [   42.840220]  [<c1036863>] ? warn_slowpath_common+0x5e/0x8a
> [   42.843145]  [<c11ec2b1>] ? dev_watchdog+0x0/0x15a
> [   42.846466]  [<c10368c1>] ? warn_slowpath_fmt+0x26/0x2a
> [   42.849740]  [<c11ec36e>] ? dev_watchdog+0xbd/0x15a
> [   42.853024]  [<c1048d17>] ? insert_work+0x71/0x78
> [   42.856275]  [<c1049090>] ? delayed_work_timer_fn+0x0/0x28
> [   42.859217]  [<c1041a0f>] ? run_timer_softirq+0x165/0x1e6
> [   42.862491]  [<c103b8c1>] ? __do_softirq+0xaa/0x151
> [   42.865754]  [<c103b999>] ? do_softirq+0x31/0x3c
> [   42.868975]  [<c103baa2>] ? irq_exit+0x26/0x58
> [   42.872226]  [<c101a30a>] ? smp_apic_timer_interrupt+0x6c/0x76
> [   42.875216]  [<c1271f7d>] ? apic_timer_interrupt+0x31/0x38
> [   42.878415]  [<c1020ce4>] ? native_safe_halt+0x2/0x3
> [   42.881696]  [<c100de11>] ? default_idle+0x3c/0x5a
> [   42.884928]  [<c1007109>] ? cpu_idle+0x89/0xa4
> [   42.888140] ---[ end trace 79047fbd81cfba1b ]---
> [   52.240900] [drm] nouveau 0000:01:00.0: GPU lockup - switching to software fbcon

Cheers,
Julien

Attachment: signature.asc
Description: Digital signature


Reply to: