Bug#580220: xserver-xorg-input-evdev: Logitech G500 mouse detected as 'USB HID v1.1 Keyboard'
Package: xserver-xorg-input-evdev
Version: 1:2.3.2-4
Severity: important
On my laptop, when I install xserver-xorg-input-evdev version 1:2.3.2-6
(now in testing), the next time I re-connect my Logitech G500 USB mouse
it gets misdetected as a USB keyboard instead - and, naturally enough,
completely fails to work as a mouse. Downgrading to version 1:2.3.2-4,
from my local package cache, makes things work fine again.
What information can I provide to help track down this problem?
(Unfortunately, the automatically-appended Xorg.0.log is a bit of a
mess; it's got multiple suspend-to-disk/resume cycles in it, and all the
cruft from when I was testing the mouse to track down the problem. Sorry
about that.)
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Dec 30 08:25 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1877984 Apr 19 13:20 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility
Radeon HD 4500 Series]
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1357 Apr 23 20:58 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
#Section "Monitor"
# Identifier "aticonfig-Monitor[0]-0"
# Option "VendorName" "ATI Proprietary Driver"
# Option "ModelName" "Generic Autodetecting Monitor"
# Option "DPMS" "true"
#EndSection
# EDID version 1 revision 3
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules/extensions"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "Module"
Load "glx"
EndSection
Section "Monitor"
# Block type: 2:0 3:fe
# Block type: 2:0 3:0
# Block type: 2:0 3:fe
# Block type: 2:0 3:0
# DPMS capabilities: Active off:no Suspend:no Standby:no
# Block type: 2:0 3:fe
# Block type: 2:0 3:0
Identifier "LGD:6602"
VendorName "LGD"
ModelName "LGD:6602"
ModeLine "1366x768" 69.3 1366 1398 1430 1486 768 770 774
782 -hsync -vsync
ModeLine "1366x768" 69.3 1366 1398 1430 1486 768 770 774
782 -hsync -vsync
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
# Monitor "aticonfig-Monitor[0]-0"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "LGD:6602"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Kernel version (/proc/version):
Linux version 2.6.32-3-amd64 (Debian 2.6.32-9) (maks@debian.org) (gcc
version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Feb 24 18:07:42 UTC 2010
Xorg X server log files on system:
-rw-r--r-- 1 root root 38714 May 4 09:34 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-4-amd64 x86_64 Debian
Current Operating System: Linux aqualung 2.6.32-3-amd64 #1 SMP Wed Feb
24 18:07:42 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-amd64
root=UUID=f561648f-c790-477a-a08a-a19ad34f5d67 ro
Build Date: 05 April 2010 02:21:15PM
xorg-server 2:1.7.6-2 (Timo Aaltonen <tjaalton@ubuntu.com>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 30 18:01:17 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "LGD:6602"
(**) | |-->Device "aticonfig-Device[0]-0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(**) ModulePath set to
"/usr/lib/xorg/modules/extensions,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
(II) Loader magic: 0x7c59c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:9553:1028:02be ATI Technologies Inc M92
[Mobility Radeon HD 4500 Series] rev 0, Mem @ 0xd0000000/268435456,
0xfc000000/65536, I/O @ 0x0
0002000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also
specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.10
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.10
(II) ATI Proprietary Linux Driver Version Identifier:8.72.10
(II) ATI Proprietary Linux Driver Release Identifier: 8.72.1
(II) ATI Proprietary Linux Driver Build Date: Mar 10 2010 23:41:33
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x9553) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1)
found
(II) AMD Video driver is running on a device belonging to a group
targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0xfcbc40
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4500 Series" (Chipset =
0x9553)
(--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x02be)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT
original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfc000000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 11.21
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M92
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
(II) fglrx(0): Interrupt handler installed at IRQ 32.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: LGD Model: 266 Serial#: 0
(II) fglrx(0): Year: 2009 Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.607 redY: 0.606 greenX: 0.333 greenY: 0.586
(II) fglrx(0): blueX: 0.149 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm
(II) fglrx(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end
1486 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking:
782 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm
(II) fglrx(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end
1486 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking:
782 v_border: 0
(II) fglrx(0): 1K0R2�156WH2
(II) fglrx(0): Unknown vendor-specific block 0
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0030e4660200000000
(II) fglrx(0): 00130103802213780a94659b9b559626
(II) fglrx(0): 0f505400000001010101010101010101
(II) fglrx(0): 010101010101121b567850000e302020
(II) fglrx(0): 240058c210000019121b567850000e30
(II) fglrx(0): 2020240058c210000019000000fe0031
(II) fglrx(0): 4b305232803135365748320a00000000
(II) fglrx(0): 00ffffffffffffffff01010a20200070
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Output LVDS using monitor section LGD:6602
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(II) fglrx(0): Output LVDS connected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output LVDS using initial mode 1366x768
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Mobility Radeon HD 4500 Series has 2
configurable heads and 1 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 16, (OK)
ukiOpenByBusid: ukiOpenMinor returns 16
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f802aade000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.72.10
(II) fglrx(0): Date: Mar 11 2010
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-3-amd64
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01012000
(II) fglrx(0): FBMM initialized for area (0,0)-(1408,2992)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1408,1408) (front color
buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1408 x 1584
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 17, (OK)
ukiOpenByBusid: ukiOpenMinor returns 17
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) AIGLX: Loaded and initialized /usr/X11R6/lib64/modules/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 361 x 203
(II) config/udev: Adding input device Power Button (/dev/input/event5)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Video Bus (/dev/input/event6)
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Lid Switch (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event3)
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Laptop_Integrated_Webcam_2M
(/dev/input/event10)
(**) Laptop_Integrated_Webcam_2M: always reports core events
(**) Laptop_Integrated_Webcam_2M: Device: "/dev/input/event10"
(II) Laptop_Integrated_Webcam_2M: Found keys
(II) Laptop_Integrated_Webcam_2M: Configuring as keyboard
(II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2M"
(type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event11)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic at Ext Left Jack
(/dev/input/event12)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel HP Out at Ext Left Jack
(/dev/input/event13)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel HP Out at Ext Left Jack
(/dev/input/event14)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
(**) Logitech G500: always reports core events
(**) Logitech G500: Device: "/dev/input/event7"
(II) Logitech G500: Found 20 mouse buttons
(II) Logitech G500: Found scroll wheel(s)
(II) Logitech G500: Found relative axes
(II) Logitech G500: Found x and y relative axes
(II) Logitech G500: Configuring as mouse
(**) Logitech G500: YAxisMapping: buttons 4 and 5
(**) Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech G500" (type: MOUSE)
(II) Logitech G500: initialized for relative axes.
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event8)
(**) Logitech G500: always reports core events
(**) Logitech G500: Device: "/dev/input/event8"
(II) Logitech G500: Found 1 mouse buttons
(II) Logitech G500: Found scroll wheel(s)
(II) Logitech G500: Found relative axes
(II) Logitech G500: Found absolute axes
(II) Logitech G500: Found keys
(II) Logitech G500: Configuring as mouse
(II) Logitech G500: Configuring as keyboard
(**) Logitech G500: YAxisMapping: buttons 4 and 5
(**) Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech G500" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(EE) Logitech G500: failed to initialize for relative axes.
(II) Logitech G500: initialized for absolute axes.
(II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event1)
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard"
(type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/event9)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad"
(type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation
(/dev/input/event0)
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button
emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation
(/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ACPI Virtual Keyboard Device
(/dev/input/event15)
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event15"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device"
(type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR
1.2 capable environments
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(II) config/udev: removing device Logitech G500
(II) Logitech G500: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Logitech G500
(II) Logitech G500: Close
(II) UnloadModule: "evdev"
(II) fglrx(0): AC Offline
(II) fglrx(0): AC Online
(II) fglrx(0): Preparing suspend from graphics mode...
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) fglrx(0): Backup framebuffer data.
(II) fglrx(0): Backup complete.
(II) fglrx(0): Preparing resume to graphics mode...
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) fglrx(0): Suspend/Resume detected. Restoring framebuffer data.
(II) fglrx(0): Restore complete.
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): AC Offline
(II) fglrx(0): AC Online
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Laptop_Integrated_Webcam_2M: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) fglrx(0): Hot-plug event occurs on device: 1:0:0
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) fglrx(0): AC Offline
(II) fglrx(0): Preparing suspend from graphics mode...
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) fglrx(0): Backup framebuffer data.
(II) fglrx(0): Backup complete.
(II) fglrx(0): Preparing resume to graphics mode...
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) fglrx(0): Suspend/Resume detected. Restoring framebuffer data.
(II) fglrx(0): Restore complete.
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Keep CrossFire as disabled in DC power State
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Laptop_Integrated_Webcam_2M: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) fglrx(0): Hot-plug event occurs on device: 1:0:0
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) fglrx(0): Preparing suspend from graphics mode...
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) fglrx(0): Backup framebuffer data.
(II) fglrx(0): Backup complete.
(II) fglrx(0): Preparing resume to graphics mode...
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) fglrx(0): Suspend/Resume detected. Restoring framebuffer data.
(II) fglrx(0): Restore complete.
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Keep CrossFire as disabled in DC power State
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Laptop_Integrated_Webcam_2M: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) fglrx(0): Hot-plug event occurs on device: 1:0:0
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
(**) Logitech G500: always reports core events
(**) Logitech G500: Device: "/dev/input/event7"
(II) Logitech G500: Found 20 mouse buttons
(II) Logitech G500: Found scroll wheel(s)
(II) Logitech G500: Found relative axes
(II) Logitech G500: Found x and y relative axes
(II) Logitech G500: Configuring as mouse
(**) Logitech G500: YAxisMapping: buttons 4 and 5
(**) Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech G500" (type: MOUSE)
(II) Logitech G500: initialized for relative axes.
(II) config/udev: Adding input device Logitech G500 (/dev/input/event8)
(**) Logitech G500: always reports core events
(**) Logitech G500: Device: "/dev/input/event8"
(II) Logitech G500: Found 1 mouse buttons
(II) Logitech G500: Found scroll wheel(s)
(II) Logitech G500: Found relative axes
(II) Logitech G500: Found absolute axes
(II) Logitech G500: Found keys
(II) Logitech G500: Configuring as mouse
(II) Logitech G500: Configuring as keyboard
(**) Logitech G500: YAxisMapping: buttons 4 and 5
(**) Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech G500" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(EE) Logitech G500: failed to initialize for relative axes.
(II) Logitech G500: initialized for absolute axes.
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(EE) fglrx(0): Add Customize Mode failed: 2
(II) config/udev: removing device Logitech G500
(II) Logitech G500: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Logitech G500
(II) Logitech G500: Close
(II) UnloadModule: "evdev"
(II) fglrx(0): Preparing suspend from graphics mode...
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) fglrx(0): Backup framebuffer data.
(II) fglrx(0): Backup complete.
(II) fglrx(0): Preparing resume to graphics mode...
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) fglrx(0): Suspend/Resume detected. Restoring framebuffer data.
(II) fglrx(0): Restore complete.
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Keep CrossFire as disabled in DC power State
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Laptop_Integrated_Webcam_2M: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) fglrx(0): Hot-plug event occurs on device: 1:0:0
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Preparing suspend from graphics mode...
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) fglrx(0): Backup framebuffer data.
(II) fglrx(0): Backup complete.
(II) fglrx(0): Preparing resume to graphics mode...
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) fglrx(0): Suspend/Resume detected. Restoring framebuffer data.
(II) fglrx(0): Restore complete.
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Keep CrossFire as disabled in DC power State
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Laptop_Integrated_Webcam_2M: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) fglrx(0): Hot-plug event occurs on device: 1:0:0
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech G500 (/dev/input/event7)
(**) Logitech G500: always reports core events
(**) Logitech G500: Device: "/dev/input/event7"
(II) Logitech G500: Found 20 mouse buttons
(II) Logitech G500: Found scroll wheel(s)
(II) Logitech G500: Found relative axes
(II) Logitech G500: Found x and y relative axes
(II) Logitech G500: Configuring as mouse
(**) Logitech G500: YAxisMapping: buttons 4 and 5
(**) Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech G500" (type: MOUSE)
(II) Logitech G500: initialized for relative axes.
(II) config/udev: Adding input device Logitech G500 (/dev/input/event8)
(**) Logitech G500: always reports core events
(**) Logitech G500: Device: "/dev/input/event8"
(II) Logitech G500: Found 1 mouse buttons
(II) Logitech G500: Found scroll wheel(s)
(II) Logitech G500: Found relative axes
(II) Logitech G500: Found absolute axes
(II) Logitech G500: Found keys
(II) Logitech G500: Configuring as mouse
(II) Logitech G500: Configuring as keyboard
(**) Logitech G500: YAxisMapping: buttons 4 and 5
(**) Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech G500" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(EE) Logitech G500: failed to initialize for relative axes.
(II) Logitech G500: initialized for absolute axes.
udev information:
P: /devices/virtual/input/input0/event0
N: input/event0
S: char/13:64
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: x11_driver=evdev
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:64
P: /devices/platform/i8042/serio0/input/input1/event1
N: input/event1
S: char/13:65
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:65
/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: x11_driver=evdev
E: DMI_VENDOR=Dell Inc.
P: /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10/event10
N: input/event10
S: char/13:74
S:
input/by-id/usb-M092S-H00-9909-SC30J_Laptop_Integrated_Webcam_2M-event-if00
S: input/by-path/pci-0000:00:1a.7-usb-0:6:1.0-event
E: UDEV_LOG=3
E:
DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=M092S-H00-9909-SC30J
E: ID_VENDOR_ENC=M092S-H00-9909-SC30J
E: ID_VENDOR_ID=0c45
E: ID_MODEL=Laptop_Integrated_Webcam_2M
E: ID_MODEL_ENC=Laptop_Integrated_Webcam_2M
E: ID_MODEL_ID=63eb
E: ID_REVISION=8923
E: ID_SERIAL=M092S-H00-9909-SC30J_Laptop_Integrated_Webcam_2M
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1a.7-usb-0:6:1.0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:74
/dev/input/by-id/usb-M092S-H00-9909-SC30J_Laptop_Integrated_Webcam_2M-event-if00
/dev/input/by-path/pci-0000:00:1a.7-usb-0:6:1.0-event
E: x11_driver=evdev
P: /devices/pci0000:00/0000:00:1b.0/input/input11/event11
N: input/event11
S: char/13:75
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input11/event11
E: MAJOR=13
E: MINOR=75
E: DEVNAME=/dev/input/event11
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:75
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
N: input/event12
S: char/13:76
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
E: MAJOR=13
E: MINOR=76
E: DEVNAME=/dev/input/event12
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ACL_MANAGE=1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:76
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
N: input/event13
S: char/13:77
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
E: MAJOR=13
E: MINOR=77
E: DEVNAME=/dev/input/event13
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ACL_MANAGE=1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:77
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event14
N: input/event14
S: char/13:78
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14/event14
E: MAJOR=13
E: MINOR=78
E: DEVNAME=/dev/input/event14
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ACL_MANAGE=1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:78
P: /devices/virtual/input/input15/event15
N: input/event15
S: char/13:79
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input15/event15
E: MAJOR=13
E: MINOR=79
E: DEVNAME=/dev/input/event15
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:79
E: x11_driver=evdev
E: DMI_VENDOR=Dell Inc.
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:66
E: x11_driver=evdev
E: DMI_VENDOR=Dell Inc.
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:67
E: x11_driver=evdev
E: DMI_VENDOR=Dell Inc.
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:68
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
N: input/event5
S: char/13:69
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:69
E: x11_driver=evdev
E: DMI_VENDOR=Dell Inc.
P:
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event6
N: input/event6
S: char/13:70
E: UDEV_LOG=3
E:
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:70
E: x11_driver=evdev
E: DMI_VENDOR=Dell Inc.
P: /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input36/event7
N: input/event7
S: char/13:71
S: input/by-id/usb-Logitech_G500_33981DB2630016-event-mouse
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-mouse
E: UDEV_LOG=3
E:
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input36/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=G500
E: ID_MODEL_ENC=G500
E: ID_MODEL_ID=c068
E: ID_REVISION=5801
E: ID_SERIAL=Logitech_G500_33981DB2630016
E: ID_SERIAL_SHORT=33981DB2630016
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.0
E: x11_driver=evdev
E: DEVLINKS=/dev/char/13:71
/dev/input/by-id/usb-Logitech_G500_33981DB2630016-event-mouse
/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.0-event-mouse
P: /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input37/event8
N: input/event8
S: char/13:72
S: input/by-id/usb-Logitech_G500_33981DB2630016-event-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-kbd
E: UDEV_LOG=3
E:
DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input37/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=G500
E: ID_MODEL_ENC=G500
E: ID_MODEL_ID=c068
E: ID_REVISION=5801
E: ID_SERIAL=Logitech_G500_33981DB2630016
E: ID_SERIAL_SHORT=33981DB2630016
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.0-usb-0:1:1.1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:72
/dev/input/by-id/usb-Logitech_G500_33981DB2630016-event-kbd
/dev/input/by-path/pci-0000:00:1d.0-usb-0:1:1.1-event-kbd
E: x11_driver=evdev
P: /devices/platform/i8042/serio1/input/input9/event9
N: input/event9
S: char/13:73
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: x11_driver=synaptics
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:73
/dev/input/by-path/platform-i8042-serio-1-event-mouse
DRM Information from dmesg:
[ 0.423163] Linux agpgart interface v0.103
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-input-evdev depends on:
ii libc6 2.10.2-6 Embedded GNU C Library:
Shared lib
ii udev 151-3 /dev/ and hotplug
management daemo
ii xserver-xorg-core 2:1.7.6.901-3 Xorg X server - core server
xserver-xorg-input-evdev recommends no packages.
xserver-xorg-input-evdev suggests no packages.
-- no debconf information
Reply to: