[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#606340: "No devices detected" since upgrade to xserver-xorg-video-intel 2:2.13.0-4



On 08/12/2010 at 20:09 +0100, Julien Cristau wrote:

> Please attach the full dmesg.

I’m having the same issue (2:2.13.0-3 works for me, and 2:2.13.0-4 does
not).

Please, let me know if I can provide any information to help.

Thanks.

-- 
Kiko
 (park)=0 ithresh=8 period=1024 Reset HALT
[    7.673356] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    7.673359] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[    7.673387] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfa426c00
[    7.690548] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    7.694428] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    7.704045] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    7.724337] usb usb1: default language 0x0409
[    7.724350] usb usb1: udev 1, busnum 1, minor = 0
[    7.724354] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.744815] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.762148] usb usb1: Product: EHCI Host Controller
[    7.778890] usb usb1: Manufacturer: Linux 2.6.36.1 ehci_hcd
[    7.795636] usb usb1: SerialNumber: 0000:00:1a.7
[    7.812825] usb usb1: usb_probe_device
[    7.812832] usb usb1: configuration #1 chosen from 1 choice
[    7.812847] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    7.812889] hub 1-0:1.0: usb_probe_interface
[    7.812893] hub 1-0:1.0: usb_probe_interface - got id
[    7.812897] hub 1-0:1.0: USB hub found
[    7.829772] hub 1-0:1.0: 4 ports detected
[    7.850067] hub 1-0:1.0: standalone hub
[    7.850070] hub 1-0:1.0: no power switching (usb 1.0)
[    7.850074] hub 1-0:1.0: individual port over-current protection
[    7.850078] hub 1-0:1.0: power on to power good time: 20ms
[    7.850086] hub 1-0:1.0: local power source is good
[    7.850089] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    7.850210] drivers/usb/core/inode.c: creating file '001'
[    7.850292] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    7.868034] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    7.868042] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    7.885063] drivers/usb/core/inode.c: creating file '002'
[    7.885074] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    7.893367] usbcore: registered new interface driver usbserial
[    7.893389] USB Serial support registered for generic
[    7.893848] usbcore: registered new interface driver usbserial_generic
[    7.893852] usbserial: USB Serial Driver core
[    7.971051] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[    7.971057] hub 1-0:1.0: port 1: status 0501 change 0001
[    7.971075] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 001803 0  ACK POWER sig=j CSC CONNECT
[    7.971081] hub 1-0:1.0: port 2: status 0501 change 0001
[    7.971098] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001403 0  ACK POWER sig=k CSC CONNECT
[    7.971103] hub 1-0:1.0: port 3: status 0501 change 0001
[    7.971131] uhci_hcd 0000:00:1a.0: detected 2 ports
[    7.974651] USB Serial support registered for GSM modem (1-port)
[    7.975121] usbcore: registered new interface driver option
[    7.975125] option: v0.7.2:USB Driver for GSM modems
[    8.036126] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[    8.036130] uhci_hcd 0000:00:1a.0: Performing full reset
[    8.036153] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[    8.036183] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[    8.052299] usb usb2: default language 0x0409
[    8.052310] usb usb2: udev 1, busnum 2, minor = 128
[    8.052314] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    8.068471] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.084789] usb usb2: Product: UHCI Host Controller
[    8.101645] usb usb2: Manufacturer: Linux 2.6.36.1 uhci_hcd
[    8.117861] usb usb2: SerialNumber: 0000:00:1a.0
[    8.133987] hub 1-0:1.0: state 7 ports 4 chg 000e evt 0000
[    8.134003] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[    8.134040] usb usb2: usb_probe_device
[    8.134045] usb usb2: configuration #1 chosen from 1 choice
[    8.134056] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    8.134093] hub 2-0:1.0: usb_probe_interface
[    8.134097] hub 2-0:1.0: usb_probe_interface - got id
[    8.134101] hub 2-0:1.0: USB hub found
[    8.150086] hub 2-0:1.0: 2 ports detected
[    8.165907] hub 2-0:1.0: standalone hub
[    8.165911] hub 2-0:1.0: no power switching (usb 1.0)
[    8.165914] hub 2-0:1.0: individual port over-current protection
[    8.165918] hub 2-0:1.0: power on to power good time: 2ms
[    8.165928] hub 2-0:1.0: local power source is good
[    8.165932] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    8.165983] drivers/usb/core/inode.c: creating file '001'
[    8.166033] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[    8.166287] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[    8.185739] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[    8.201593] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    8.201831] ehci_hcd 0000:00:1a.7: port 1 full speed --> companion
[    8.201839] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003801 0  ACK POWER OWNER sig=j CONNECT
[    8.201845] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[    8.217148] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    8.217155] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    8.232049] drivers/usb/core/inode.c: creating file '003'
[    8.232057] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[    8.246717] uhci_hcd 0000:00:1a.1: detected 2 ports
[    8.260996] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[    8.261000] uhci_hcd 0000:00:1a.1: Performing full reset
[    8.261023] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[    8.261050] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[    8.261105] usb usb3: default language 0x0409
[    8.261116] usb usb3: udev 1, busnum 3, minor = 256
[    8.261120] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    8.261124] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.261127] usb usb3: Product: UHCI Host Controller
[    8.261130] usb usb3: Manufacturer: Linux 2.6.36.1 uhci_hcd
[    8.261133] usb usb3: SerialNumber: 0000:00:1a.1
[    8.261191] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
[    8.261231] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[    8.261254] usb usb3: usb_probe_device
[    8.261258] usb usb3: configuration #1 chosen from 1 choice
[    8.261268] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    8.261347] hub 3-0:1.0: usb_probe_interface
[    8.261351] hub 3-0:1.0: usb_probe_interface - got id
[    8.261353] hub 3-0:1.0: USB hub found
[    8.261360] hub 3-0:1.0: 2 ports detected
[    8.261363] hub 3-0:1.0: standalone hub
[    8.261365] hub 3-0:1.0: no power switching (usb 1.0)
[    8.261368] hub 3-0:1.0: individual port over-current protection
[    8.261371] hub 3-0:1.0: power on to power good time: 2ms
[    8.261378] hub 3-0:1.0: local power source is good
[    8.261381] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    8.261465] drivers/usb/core/inode.c: creating file '001'
[    8.261510] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
[    8.264052] uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00
[    8.264058] hub 2-0:1.0: port 1: status 0101 change 0001
[    8.264075] uhci_hcd 0000:00:1a.0: port 2 portsc 0082,00
[    8.395472] uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00
[    8.395540] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[    8.395702] ehci_hcd 0000:00:1a.7: port 2 full speed --> companion
[    8.395709] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 003801 0  ACK POWER OWNER sig=j CONNECT
[    8.395715] hub 1-0:1.0: port 2 not reset yet, waiting 50ms
[    8.409287] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[    8.425375] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.441406] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    8.441414] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    8.455375] drivers/usb/core/inode.c: creating file '004'
[    8.455382] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    8.468860] uhci_hcd 0000:00:1d.0: detected 2 ports
[    8.468896] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 003002 0  ACK POWER OWNER sig=se0 CSC
[    8.468939] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[    8.468951] ehci_hcd 0000:00:1a.7: port 3 low speed --> companion
[    8.482724] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[    8.482728] uhci_hcd 0000:00:1d.0: Performing full reset
[    8.482749] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[    8.482759] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
[    8.498920] usb usb4: default language 0x0409
[    8.498932] usb usb4: udev 1, busnum 4, minor = 384
[    8.498936] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    8.515298] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.524036] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003002 0  ACK POWER OWNER sig=se0 CSC
[    8.524074] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0008
[    8.524084] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0004
[    8.524098] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[    8.531829] usb usb4: Product: UHCI Host Controller
[    8.548090] usb usb4: Manufacturer: Linux 2.6.36.1 uhci_hcd
[    8.564382] usb usb4: SerialNumber: 0000:00:1d.0
[    8.580561] usb usb4: usb_probe_device
[    8.580566] usb usb4: configuration #1 chosen from 1 choice
[    8.580577] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    8.580618] hub 4-0:1.0: usb_probe_interface
[    8.580621] hub 4-0:1.0: usb_probe_interface - got id
[    8.580625] hub 4-0:1.0: USB hub found
[    8.596692] hub 4-0:1.0: 2 ports detected
[    8.612583] hub 4-0:1.0: standalone hub
[    8.612587] hub 4-0:1.0: no power switching (usb 1.0)
[    8.612590] hub 4-0:1.0: individual port over-current protection
[    8.612594] hub 4-0:1.0: power on to power good time: 2ms
[    8.612602] hub 4-0:1.0: local power source is good
[    8.612606] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    8.612699] drivers/usb/core/inode.c: creating file '001'
[    8.612808] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.629113] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[    8.643964] usb 2-1: new full speed USB device using uhci_hcd and address 2
[    8.643979] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    8.816341] usb 2-1: skipped 1 descriptor after interface
[    8.819318] usb 2-1: default language 0x0409
[    8.829330] usb 2-1: udev 2, busnum 2, minor = 129
[    8.829334] usb 2-1: New USB device found, idVendor=0a5c, idProduct=2110
[    8.843131] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.856866] usb 2-1: Product: BCM2045B
[    8.870324] usb 2-1: Manufacturer: Broadcom Corp
[    8.883930] usb 2-1: usb_probe_device
[    8.883936] usb 2-1: configuration #1 chosen from 1 choice
[    8.886331] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[    8.886374] usbserial_generic 2-1:1.0: usb_probe_interface
[    8.886378] usbserial_generic 2-1:1.0: usb_probe_interface - got id
[    8.886436] usb 2-1: adding 2-1:1.1 (config #1, interface 1)
[    8.886482] usbserial_generic 2-1:1.1: usb_probe_interface
[    8.886486] usbserial_generic 2-1:1.1: usb_probe_interface - got id
[    8.886529] usb 2-1: adding 2-1:1.2 (config #1, interface 2)
[    8.886566] usbserial_generic 2-1:1.2: usb_probe_interface
[    8.886569] usbserial_generic 2-1:1.2: usb_probe_interface - got id
[    8.886611] usb 2-1: adding 2-1:1.3 (config #1, interface 3)
[    8.886648] usbserial_generic 2-1:1.3: usb_probe_interface
[    8.886652] usbserial_generic 2-1:1.3: usb_probe_interface - got id
[    8.886696] drivers/usb/core/inode.c: creating file '002'
[    8.886728] uhci_hcd 0000:00:1a.0: port 2 portsc 0093,00
[    8.886740] hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[    9.016135] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
[    9.053313] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[    9.070008] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[    9.084576] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    9.099055] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    9.099064] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    9.112704] drivers/usb/core/inode.c: creating file '005'
[    9.112713] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    9.125982] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[    9.125992] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[    9.126048] ehci_hcd 0000:00:1d.7: debug port 1
[    9.139157] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    9.140059] usb 2-2: new full speed USB device using uhci_hcd and address 3
[    9.143053] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    9.143057] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[    9.143090] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfa427000
[    9.143100] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    9.146976] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    9.168325] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    9.181459] usb usb5: default language 0x0409
[    9.181471] usb usb5: udev 1, busnum 5, minor = 512
[    9.181475] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    9.194688] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.207923] usb usb5: Product: EHCI Host Controller
[    9.221082] usb usb5: Manufacturer: Linux 2.6.36.1 ehci_hcd
[    9.234359] usb usb5: SerialNumber: 0000:00:1d.7
[    9.247806] usb usb5: usb_probe_device
[    9.247811] usb usb5: configuration #1 chosen from 1 choice
[    9.247823] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[    9.247861] hub 5-0:1.0: usb_probe_interface
[    9.247864] hub 5-0:1.0: usb_probe_interface - got id
[    9.247868] hub 5-0:1.0: USB hub found
[    9.261028] hub 5-0:1.0: 6 ports detected
[    9.274287] hub 5-0:1.0: standalone hub
[    9.274290] hub 5-0:1.0: no power switching (usb 1.0)
[    9.274294] hub 5-0:1.0: individual port over-current protection
[    9.274297] hub 5-0:1.0: power on to power good time: 20ms
[    9.274305] hub 5-0:1.0: local power source is good
[    9.274309] hub 5-0:1.0: trying to enable port power on non-switchable hub
[    9.274396] drivers/usb/core/inode.c: creating file '001'
[    9.274436] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[    9.274489] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.288107] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    9.288113] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    9.301653] drivers/usb/core/inode.c: creating file '006'
[    9.301660] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    9.315267] uhci_hcd 0000:00:1d.1: detected 2 ports
[    9.315287] usb 2-2: ep0 maxpacket = 8
[    9.328812] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[    9.328816] uhci_hcd 0000:00:1d.1: Performing full reset
[    9.328839] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[    9.328849] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
[    9.342447] usb usb6: default language 0x0409
[    9.342459] usb usb6: udev 1, busnum 6, minor = 640
[    9.342464] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    9.356299] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.370857] usb usb6: Product: UHCI Host Controller
[    9.370872] usb 2-2: default language 0x0409
[    9.384417] usb usb6: Manufacturer: Linux 2.6.36.1 uhci_hcd
[    9.384769] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001803 0  ACK POWER sig=j CSC CONNECT
[    9.384775] hub 5-0:1.0: port 3: status 0501 change 0001
[    9.384798] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001803 0  ACK POWER sig=j CSC CONNECT
[    9.384803] hub 5-0:1.0: port 5: status 0501 change 0001
[    9.398092] usb usb6: SerialNumber: 0000:00:1d.1
[    9.411655] usb 2-2: udev 3, busnum 2, minor = 130
[    9.411659] usb 2-2: New USB device found, idVendor=0483, idProduct=2016
[    9.411769] usb usb6: usb_probe_device
[    9.411774] usb usb6: configuration #1 chosen from 1 choice
[    9.411786] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[    9.411869] hub 6-0:1.0: usb_probe_interface
[    9.411873] hub 6-0:1.0: usb_probe_interface - got id
[    9.411876] hub 6-0:1.0: USB hub found
[    9.411884] hub 6-0:1.0: 2 ports detected
[    9.411887] hub 6-0:1.0: standalone hub
[    9.411890] hub 6-0:1.0: no power switching (usb 1.0)
[    9.411892] hub 6-0:1.0: individual port over-current protection
[    9.411896] hub 6-0:1.0: power on to power good time: 2ms
[    9.411902] hub 6-0:1.0: local power source is good
[    9.411905] hub 6-0:1.0: trying to enable port power on non-switchable hub
[    9.411991] drivers/usb/core/inode.c: creating file '001'
[    9.412073] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[    9.452777] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.453479] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[    9.456067] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[    9.456086] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    9.456102] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    9.456109] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    9.456121] drivers/usb/core/inode.c: creating file '007'
[    9.456128] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    9.456144] uhci_hcd 0000:00:1d.2: detected 2 ports
[    9.456153] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[    9.456156] uhci_hcd 0000:00:1d.2: Performing full reset
[    9.456180] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[    9.456208] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
[    9.456266] usb usb7: default language 0x0409
[    9.456277] usb usb7: udev 1, busnum 7, minor = 768
[    9.456281] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    9.456285] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.456288] usb usb7: Product: UHCI Host Controller
[    9.456292] usb usb7: Manufacturer: Linux 2.6.36.1 uhci_hcd
[    9.456295] usb usb7: SerialNumber: 0000:00:1d.2
[    9.456375] usb usb7: usb_probe_device
[    9.456379] usb usb7: configuration #1 chosen from 1 choice
[    9.456389] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[    9.456427] hub 7-0:1.0: usb_probe_interface
[    9.456430] hub 7-0:1.0: usb_probe_interface - got id
[    9.456433] hub 7-0:1.0: USB hub found
[    9.456439] hub 7-0:1.0: 2 ports detected
[    9.456442] hub 7-0:1.0: standalone hub
[    9.456444] hub 7-0:1.0: no power switching (usb 1.0)
[    9.456447] hub 7-0:1.0: individual port over-current protection
[    9.456451] hub 7-0:1.0: power on to power good time: 2ms
[    9.456457] hub 7-0:1.0: local power source is good
[    9.456460] hub 7-0:1.0: trying to enable port power on non-switchable hub
[    9.456508] drivers/usb/core/inode.c: creating file '001'
[    9.456562] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[    9.659870] usb 2-2: Product: Biometric Coprocessor
[    9.659903] usb usb4: suspend_rh (auto-stop)
[    9.660745] uhci_hcd 0000:00:1d.1: port 1 portsc 0082,00
[    9.660777] uhci_hcd 0000:00:1d.2: port 1 portsc 0082,00
[    9.675987] usb 2-2: Manufacturer: STMicroelectronics
[    9.692102] usb 2-2: usb_probe_device
[    9.692108] usb 2-2: configuration #1 chosen from 1 choice
[    9.694340] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[    9.694383] usbserial_generic 2-2:1.0: usb_probe_interface
[    9.694387] usbserial_generic 2-2:1.0: usb_probe_interface - got id
[    9.694473] drivers/usb/core/inode.c: creating file '003'
[    9.694501] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
[    9.694718] uhci_hcd 0000:00:1a.1: port 1 portsc 01a3,00
[    9.694732] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
[    9.725812] Bluetooth: Core ver 2.15
[    9.739700] NET: Registered protocol family 31
[    9.752756] Bluetooth: HCI device and connection manager initialized
[    9.766079] Bluetooth: HCI socket layer initialized
[    9.782579] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    9.795993] btusb 2-1:1.0: usb_probe_interface
[    9.795998] btusb 2-1:1.0: usb_probe_interface - got id
[    9.796186] btusb 2-1:1.2: usb_probe_interface
[    9.796190] btusb 2-1:1.2: usb_probe_interface - got id
[    9.796201] btusb 2-1:1.3: usb_probe_interface
[    9.796205] btusb 2-1:1.3: usb_probe_interface - got id
[    9.796233] usbcore: registered new interface driver btusb
[    9.828111] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
[    9.944049] usb 3-1: new low speed USB device using uhci_hcd and address 2
[   10.118108] usb 3-1: skipped 1 descriptor after interface
[   10.123117] usb 3-1: default language 0x0409
[   10.139135] usb 3-1: udev 2, busnum 3, minor = 257
[   10.139140] usb 3-1: New USB device found, idVendor=046d, idProduct=c016
[   10.139144] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   10.139148] usb 3-1: Product: Optical USB Mouse
[   10.139151] usb 3-1: Manufacturer: Logitech
[   10.139257] usb 3-1: usb_probe_device
[   10.139263] usb 3-1: configuration #1 chosen from 1 choice
[   10.142125] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[   10.142174] usbserial_generic 3-1:1.0: usb_probe_interface
[   10.142178] usbserial_generic 3-1:1.0: usb_probe_interface - got id
[   10.142244] drivers/usb/core/inode.c: creating file '002'
[   10.142273] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   10.142278] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   10.142283] hub 5-0:1.0: state 7 ports 6 chg 0028 evt 0000
[   10.142297] hub 5-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[   10.153434] usbhid 3-1:1.0: usb_probe_interface
[   10.153439] usbhid 3-1:1.0: usb_probe_interface - got id
[   10.205502] ehci_hcd 0000:00:1d.7: port 3 full speed --> companion
[   10.205512] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003801 0  ACK POWER OWNER sig=j CONNECT
[   10.205519] hub 5-0:1.0: port 3 not reset yet, waiting 50ms
[   10.205986] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1a.1/usb3/3-1/3-1:1.0/input/input8
[   10.220483] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.1-1/input0
[   10.238640] usbcore: registered new interface driver usbhid
[   10.248854] EXT4-fs (sda3): re-mounted. Opts: (null)
[   10.270187] usbhid: USB HID core driver
[   10.270209] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0  ACK POWER OWNER sig=se0 CSC
[   10.270255] hub 5-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
[   10.324373] ehci_hcd 0000:00:1d.7: port 5 high speed
[   10.324383] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
[   10.353454] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   10.384083] usb 5-5: new high speed USB device using ehci_hcd and address 3
[   10.408992] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[   10.456372] ehci_hcd 0000:00:1d.7: port 5 high speed
[   10.456383] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001005 0  ACK POWER sig=se0 PE CONNECT
[   10.530366] Intel AES-NI instructions are not detected.
[   10.553045] usb 5-5: skipped 1 descriptor after configuration
[   10.553051] usb 5-5: skipped 4 descriptors after interface
[   10.553056] usb 5-5: skipped 1 descriptor after endpoint
[   10.553060] usb 5-5: skipped 17 descriptors after interface
[   10.553293] usb 5-5: default language 0x0409
[   10.553790] usb 5-5: udev 3, busnum 5, minor = 514
[   10.553794] usb 5-5: New USB device found, idVendor=17ef, idProduct=4807
[   10.569951] usb 5-5: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[   10.586046] usb 5-5: Manufacturer: Chicony Electronics Co., Ltd.
[   10.605648] usb 5-5: usb_probe_device
[   10.605654] usb 5-5: configuration #1 chosen from 1 choice
[   10.605915] usb 5-5: adding 5-5:1.0 (config #1, interface 0)
[   10.606332] usbserial_generic 5-5:1.0: usb_probe_interface
[   10.606337] usbserial_generic 5-5:1.0: usb_probe_interface - got id
[   10.606374] usb 5-5: adding 5-5:1.1 (config #1, interface 1)
[   10.606458] usbserial_generic 5-5:1.1: usb_probe_interface
[   10.606462] usbserial_generic 5-5:1.1: usb_probe_interface - got id
[   10.606543] drivers/usb/core/inode.c: creating file '003'
[   10.606571] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0002
[   10.606583] uhci_hcd 0000:00:1d.1: port 1 portsc 0093,00
[   10.606594] hub 6-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[   10.622829] Linux video capture interface: v2.00
[   10.645126] uvcvideo 5-5:1.0: usb_probe_interface
[   10.645132] uvcvideo 5-5:1.0: usb_probe_interface - got id
[   10.645155] uvcvideo: Found UVC 1.00 device <unnamed> (17ef:4807)
[   10.663128] input: UVC Camera (17ef:4807) as /devices/pci0000:00/0000:00:1d.7/usb5/5-5/5-5:1.0/input/input9
[   10.680137] usbcore: registered new interface driver uvcvideo
[   10.700430] USB Video Class driver (v0.1.0)
[   10.725279] usb 5-5: link qh1024-0001/ffff88007afc44c0 start 1 [2/0 us]
[   10.725336] usb 5-5: unlink qh1024-0001/ffff88007afc44c0 start 1 [2/0 us]
[   10.756122] hub 6-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[   10.816151] usb usb7: suspend_rh (auto-stop)
[   10.868113] usb 6-1: new full speed USB device using uhci_hcd and address 2
[   11.038507] usb 6-1: default language 0x0409
[   11.044480] usb 6-1: udev 2, busnum 6, minor = 641
[   11.044485] usb 6-1: New USB device found, idVendor=1199, idProduct=6813
[   11.061775] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   11.079084] usb 6-1: Product: Mini Card
[   11.096463] usb 6-1: Manufacturer: Sierra Wireless, Incorporated
[   11.114720] usb 6-1: usb_probe_device
[   11.114726] usb 6-1: configuration #1 chosen from 1 choice
[   11.117490] usb 6-1: adding 6-1:1.0 (config #1, interface 0)
[   11.120530] usbserial_generic 6-1:1.0: usb_probe_interface
[   11.120536] usbserial_generic 6-1:1.0: usb_probe_interface - got id
[   11.120681] drivers/usb/core/inode.c: creating file '002'
[   11.120719] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[   11.120725] hub 5-0:1.0: state 7 ports 6 chg 0000 evt 0008
[   11.127684] USB Serial support registered for Sierra USB modem
[   11.145743] sierra 6-1:1.0: usb_probe_interface
[   11.145748] sierra 6-1:1.0: usb_probe_interface - got id
[   11.145756] sierra 6-1:1.0: Sierra USB modem converter detected
[   11.146660] usb 6-1: Sierra USB modem converter now attached to ttyUSB0
[   11.146784] usb 6-1: Sierra USB modem converter now attached to ttyUSB1
[   11.146904] usb 6-1: Sierra USB modem converter now attached to ttyUSB2
[   11.146994] usbcore: registered new interface driver sierra
[   11.146997] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[   11.457345] loop: module loaded
[   11.510993] thinkpad_ec: thinkpad_ec 0.40 loaded.
[   11.530738] tp_smapi 0.40 loading...
[   11.548374] tp_smapi successfully loaded (smapi_port=0xb2).
[   11.574206] hdaps: initial mode latch is 0x05
[   11.574390] hdaps: setting ec_rate=250, filter_order=2
[   11.574613] hdaps: device successfully initialized.
[   11.592351] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input10
[   11.610471] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input11
[   11.630171] hdaps: driver successfully loaded.
[   11.660088] tun: Universal TUN/TAP device driver, 1.6
[   11.660091] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   11.670720] Loading iSCSI transport class v2.0-870.
[   11.742655] iscsi: registered transport (tcp)
[   11.753926] fuse init (API version 7.15)
[   11.807873] irda_init()
[   11.807888] NET: Registered protocol family 23
[   11.847407] IrCOMM protocol (Dag Brattli)
[   11.980421] Adding 2000088k swap on /dev/mapper/cswap.  Priority:-1 extents:1 across:2000088k 
[   12.195431] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   12.215319] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   12.218131] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   12.222014] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   12.228643] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[   12.823329] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[   13.265463] iscsid (1662): /proc/1662/oom_adj is deprecated, please use /proc/1662/oom_score_adj instead.
[   13.694094] RPC: Registered udp transport module.
[   13.694098] RPC: Registered tcp transport module.
[   13.694100] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   13.774355] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   13.836156] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   13.836439] NFSD: starting 90-second grace period
[   14.076070] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
[   14.110086] uhci_hcd 0000:00:1a.1: release dev 2 ep81-INT, period 8, phase 4, 93 us
[   14.169376] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
[   14.360110] Bluetooth: L2CAP ver 2.15
[   14.377818] Bluetooth: L2CAP socket layer initialized
[   14.398292] Bluetooth: RFCOMM TTY layer initialized
[   14.413126] Bluetooth: RFCOMM socket layer initialized
[   14.428377] Bluetooth: RFCOMM ver 1.11
[   14.431972] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.431975] Bluetooth: BNEP filters: protocol multicast
[   14.479743] Bluetooth: SCO (Voice Link) ver 0.6
[   14.494950] Bluetooth: SCO socket layer initialized
[   14.495837] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
[   14.591898] lp: driver loaded but no devices found
[   14.945002] ehci_hcd 0000:00:1d.7: reused qh ffff88007afc44c0 schedule
[   14.945011] usb 5-5: link qh1024-0001/ffff88007afc44c0 start 1 [2/0 us]
[   14.989491] usb 5-5: unlink qh1024-0001/ffff88007afc44c0 start 1 [2/0 us]
[   20.774265] CE: hpet increased min_delta_ns to 7500 nsec
[   23.192085] CE: hpet increased min_delta_ns to 11250 nsec
[   23.549010] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[   23.562933] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[   28.233004] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[   28.246999] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[   30.380066] smapi smapi: set_real_thresh: set start to 29 for bat=0
[   30.616039] smapi smapi: set_real_thresh: set stop to 90 for bat=0
[   30.856110] smapi smapi: set_real_thresh: set start to 29 for bat=1
[   31.092078] smapi smapi: set_real_thresh: set stop to 90 for bat=1
#k#Section "Files"
#k#	RgbPath		"/usr/X11R6/lib/X11/rgb"
#k#	ModulePath	"/usr/X11R6/lib/modules"
#k#	### kiko ### FontPath	"/usr/X11R6/lib/X11/fonts/misc/"
#k#	### kiko ### FontPath	"/usr/X11R6/lib/X11/fonts/Speedo/"
#k#	### kiko ### FontPath	"/usr/X11R6/lib/X11/fonts/Type1/"
#k#	### kiko ### FontPath	"/usr/X11R6/lib/X11/fonts/CID/"
#k#	### kiko ### FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/"
#k#	### kiko ### FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/"
#k#	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
#k#	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
#k#	FontPath	"/usr/lib/X11/fonts/misc/:unscaled"
#k#	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
#k#	### kiko ### FontPath	"/usr/X11R6/lib/X11/fonts/TrueType/"
#k#	### kiko ### FontPath	"/usr/X11R6/lib/X11/fonts/Type1/"
#k#EndSection
#kk#Section "Files"
#kk#
#kk##	FontPath	"/usr/X11R6/lib/X11/fonts/local/"
#kk#	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
#kk#	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
#kk#	FontPath	"/usr/X11R6/lib/X11/fonts/misc/:unscaled"
#kk##	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
#kk#	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
#kk##	FontPath	"/usr/X11R6/lib/X11/fonts/TrueType/"
#kk##	FontPath	"/usr/X11R6/lib/X11/fonts/Type1/"
#kk##	FontPath	"/usr/X11R6/lib/X11/fonts/Speedo/"
#kk#
#kk##	ModulePath	"/usr/X11R6/lib/modules"
#kk#EndSection
Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/X11R6/lib/X11/fonts/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/X11R6/lib/X11/fonts/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/X11R6/lib/X11/fonts/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

#Section "Module"
#	Load	"record"
#	Load	"extmod"
#	Load	"dbe"
#	Load	"GLcore"
#	Load	"dri"
#	Load	"freetype"
#	Load	"glx"
#	Load	"xtrap"
#	Load	"type1"
#	Load	"speedo"
#EndSection

Section "Module"
	Load	"dbe"	# Double buffer extension
	#SubSection "extmod"
	#	Option	"omit xfree86-dga"	# don't initialise the DGA extension
	#EndSubSection
	Load	"extmod"
	Load	"type1"
	Load	"freetype"
	Load	"glx"
	Load	"dri"
#	Load	"v4l"
EndSection

Section "InputDevice"
	Identifier	"Keyboard0"
	Driver		"kbd"
	Option		"AutoRepeat"	"500 30"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"es"
	Option		"XkbOptions"	"altwin:super_win"	# compiz
EndSection

Section "InputDevice"
	Identifier	"Normal Mouse"
	Driver		"mouse"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"IMPS/2"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
	Identifier	"TPPS/2 IBM TrackPoint"
	Driver		"mouse"
	Option		"Device"		"/dev/input/mouse1"
	Option		"Protocol"		"IMPS/2"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
	Identifier	"SynPS/2 Synaptics TouchPad"
	Driver		"synaptics"
	Option		"Device"		"/dev/input/mouse0"
	Option		"Protocol"		"auto-dev"
	Option		"XAxisMapping"		"6 7"
	Option		"MaxTapTime"		"0"
	Option		"SHMConfig"		"true"
EndSection

Section "Monitor"
	Identifier	"Monitor0"
	VendorName	"Monitor Vendor"
	ModelName	"Monitor Model"
	#VertRefresh	60
	Option	"DPMS"
EndSection

Section "Device"
	### Available Driver options are:-
	### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
	### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
	### [arg]: arg optional
	#Option	"NoAccel"		# [<bool>]
	#Option	"SWcursor"		# [<bool>]
	#Option	"Dac6Bit"		# [<bool>]
	#Option	"Dac8Bit"		# [<bool>]
	#Option	"ForcePCIMode"		# [<bool>]
	#Option	"CPPIOMode"		# [<bool>]
	#Option	"CPusecTimeout"		# <i>
	#Option	"AGPMode"		# <i>
	#Option	"AGPSize"		# <i>
	#Option	"RingSize"		# <i>
	#Option	"BufferSize"		# <i>
	#Option	"EnableDepthMoves"	# [<bool>]
	#Option	"CrtScreen"		# [<bool>]
	#Option	"PanelSize"		# [<str>]
	#Option	"UseFBDev"		# [<bool>]
	Identifier	"Card0"
	Driver		"intel"
	VendorName	"intel"
	BoardName	"Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)"
	BusID		"00:02:0"
	#Option		"AGPMode"	"1"
	Option		"dpms"
	#Option		"UseFBDev" "False"
	Option		"AllowGLXWithComposite" "true"	# compiz
	Option		"XAANoOffscreenPixmaps" "true"	# compiz
	Option		"TripleBuffer"		"true"	# compiz
EndSection

Section "Screen"
	Identifier "Screen0"
	Device		"Card0"
	Monitor		"Monitor0"
	DefaultDepth	24
	SubSection "Display"
		Depth	24
		Modes	"1440x900"
	EndSubSection
	Option		"AddARGBGLXVisuals"		"true"	# compiz
	Option		"DisableGLXRootClipping"	"true"	# compiz
EndSection

Section "ServerFlags"
	Option		"DontZap"	"false"
	#k# Option		"UseDefaultFontPath"	"false"
EndSection

Section "ServerLayout"
	Identifier	"ServerLayout identifier"
	Screen		0 "Screen0" 0 0
	InputDevice	"Keyboard0"			"CoreKeyboard"
	InputDevice	"Normal Mouse"			"CorePointer"
#	InputDevice	"TPPS/2 IBM TrackPoint"		"AlwaysCore"
	InputDevice	"SynPS/2 Synaptics TouchPad"	"AlwaysCore"
	Option		"AIGLX"				"true"	# compiz
EndSection

Section "Extensions"
	Option	"XVideo"	"Enable"
	Option	"Composite"	"Enable"	# compiz
EndSection

Section "DRI"
	Group	"video"
	Mode	0660
EndSection
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.26-dsa-amd64 x86_64 Debian
Current Operating System: Linux portinf2 2.6.36.1 #1 SMP Tue Nov 23 09:38:20 CET 2010 x86_64
Kernel command line: auto BOOT_IMAGE=linux-2.6.36.1 ro root=803 elevator=cfq video=intelfb:mode=1440x900-24@75,accel,hwcursor,mtrr acpi_sleep=s3_bios acpi_osi=Linux libata.atapi_enabled=1 noirqbalance
Build Date: 02 December 2010  01:10:32AM
xorg-server 2:1.7.7-10 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec  9 09:53:40 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "ServerLayout identifier"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Normal Mouse"
(**) |-->Input Device "SynPS/2 Synaptics TouchPad"
(**) Option "DontZap" "false"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/X11R6/lib/X11/fonts/misc" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "XVideo" is enabled
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Normal Mouse
(II) Loader magic: 0x7c7500
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2a02:17aa:20b5 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfa000000/1048576, 0xe0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a03:17aa:20b5 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfa100000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 2.13.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
	Sandybridge, Sandybridge
(II) Primary Device is: PCI 00@00:02:0
(EE) No devices detected.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.


Reply to: