Package: xserver-xorg-video-intel Version: 2:2.13.0-4 Hi. I also encountered similar symptons, and managed to solve the problem. First, My Thinkpad X200 system stop using intel driver but vesa driver, and as I worked on xorg.conf various defects came up through, then finally I found out that no xorg.conf and kernel with CONFIG_DRM_I915_KMS=y seems to solve the problem. Kernel version 2.6.36.1, 2.6.37-rc3, 2.6.37-rc4 with CONFIG_DRM_I915_KMS=n reproduced the problem, and 2.6.37-rc4 with CONFIG_DRM_I915_KMS=y works fine. Attached files are Xorg.0.log when it goes fine(no xorg.conf, KMS=y) and bad (no xorg.conf, KMS=n) respectively. If you want other information, feel free to request me. --- System information. --- Architecture: amd64 Kernel: Linux 2.6.37-rc4-hod+ Debian Release: squeeze/sid 500 unstable ftp.nara.wide.ad.jp 500 unstable debian-multimedia.org 500 stable volatile.debian.org 500 stable security.debian.org 200 experimental ftp.nara.wide.ad.jp 1001 unstable repository.glx-dock.org --- Package information. --- Depends (Version) | Installed =======================================-+-================= libc6 (>= 2.2.5) | 2.11.2-7 libdrm-intel1 (>= 2.4.21) | 2.4.21-1~squeeze3 libdrm2 (>= 2.4.17) | 2.4.21-1~squeeze3 libpciaccess0 (>= 0.10.7) | 0.12.0-1 libx11-6 (>= 0) | 2:1.3.3-4 libx11-xcb1 | 2:1.3.3-4 libxcb-aux0 (>= 0.3.6) | 0.3.6-1 libxcb-dri2-0 (>= 0) | 1.6-1 libxcb1 (>= 0) | 1.6-1 libxext6 | 2:1.1.2-1 libxfixes3 (>= 1:4.0.1) | 1:4.0.5-1 libxv1 | 2:1.0.6-1 libxvmc1 | 2:1.0.6-1 xorg-video-abi-6.0 | xserver-xorg-core (>= 2:1.7.6.901) | 2:1.7.7-10 Package's Recommends field is empty. Package's Suggests field is empty. Hope this helps guys. -- Katsuhiko Nishimra kat841@hotmail.com
X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32.26-dsa-amd64 x86_64 Debian Current Operating System: Linux hod 2.6.37-rc4-hod-rc+ #1 SMP Wed Dec 8 19:44:46 JST 2010 x86_64 Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.37-rc4-hod-rc+ root=/dev/mapper/main-root ro quiet Build Date: 02 December 2010 01:10:32AM xorg-server 2:1.7.7-10 (Julien Cristau <jcristau@debian.org>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 9 00:35:44 2010 (==) Using system config directory "/usr/share/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "<default monitor>" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x7c7500 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8 (--) PCI: (0:0:2:1) 8086:2a43:17aa:20e4 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2400000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (==) Matched intel as autoconfigured driver 0 (==) Matched vesa as autoconfigured driver 1 (==) Matched fbdev as autoconfigured driver 2 (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.13.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 0.4.2 ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 00@00:02:0 (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.7.7, module version = 0.0.2 ABI class: X.Org Video Driver, version 6.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45 (--) intel(0): Chipset: "GM45" (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): video overlay key set to 0x101fe (II) intel(0): Output LVDS1 has no monitor section (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 (II) intel(0): Output VGA1 has no monitor section (II) intel(0): Output HDMI1 has no monitor section (II) intel(0): Output DP1 has no monitor section (II) intel(0): Output HDMI2 has no monitor section (II) intel(0): Output DP2 has no monitor section (II) intel(0): Output DP3 has no monitor section (II) intel(0): EDID for output LVDS1 (II) intel(0): Manufacturer: LEN Model: 4010 Serial#: 0 (II) intel(0): Year: 2007 Week: 1 (II) intel(0): EDID Version: 1.3 (II) intel(0): Digital Display Input (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: StandBy Suspend Off (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 71.1 MHz Image Size: 261 x 163 mm (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 59.3 MHz Image Size: 261 x 163 mm (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 (II) intel(0): Unknown vendor-specific block f (II) intel(0): B121EW03 V6 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff0030ae104000000000 (II) intel(0): 01110103801a1078ea87f594574f8c27 (II) intel(0): 27505400000001010101010101010101 (II) intel(0): 010101010101c61b00a0502017303020 (II) intel(0): 360005a310000018261700a050201730 (II) intel(0): 3020360005a3100000180000000f0081 (II) intel(0): 0a3c810a3214010006af1436000000fe (II) intel(0): 004231323145573033205636200a00aa (II) intel(0): EDID vendor "LEN", prod id 16400 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Printing probed modes for output LVDS1 (II) intel(0): Modeline "1280x800"x60.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz) (II) intel(0): Modeline "1280x800"x50.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): EDID for output VGA1 (II) intel(0): EDID for output HDMI1 (II) intel(0): EDID for output DP1 (II) intel(0): EDID for output HDMI2 (II) intel(0): EDID for output DP2 (II) intel(0): EDID for output DP3 (II) intel(0): Output LVDS1 connected (II) intel(0): Output VGA1 disconnected (II) intel(0): Output HDMI1 disconnected (II) intel(0): Output DP1 disconnected (II) intel(0): Output HDMI2 disconnected (II) intel(0): Output DP2 disconnected (II) intel(0): Output DP3 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS1 using initial mode 1280x800 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (II) intel(0): Kernel page flipping support detected, enabling (**) intel(0): Display dimensions: (260, 160) mm (**) intel(0): DPI set to (125, 127) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) UnloadModule: "vesa" (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) UnloadModule: "fbdev" (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) UnloadModule: "fbdevhw" (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so (==) Depth 24 pixmap format is 32 bpp (==) intel(0): VideoRam: 262144 KB (II) intel(0): [DRI2] Setup complete (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (II) put_image (II) get_image (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder enabled (II) intel(0): Set up textured video (II) intel(0): [XvMC] xvmc_vld driver initialized. (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 211 (II) config/udev: Adding input device Power Button (/dev/input/event3) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6.901, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event3" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "thinkpad60" (**) Option "xkb_layout" "jp" (**) Option "xkb_variant" "106" (II) config/udev: Adding input device Video Bus (/dev/input/event11) (**) Video Bus: Applying InputClass "evdev keyboard catchall" (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event11" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "thinkpad60" (**) Option "xkb_layout" "jp" (**) Option "xkb_variant" "106" (II) config/udev: Adding input device Lid Switch (/dev/input/event1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Sleep Button (/dev/input/event2) (**) Sleep Button: Applying InputClass "evdev keyboard catchall" (**) Sleep Button: always reports core events (**) Sleep Button: Device: "/dev/input/event2" (II) Sleep Button: Found keys (II) Sleep Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "thinkpad60" (**) Option "xkb_layout" "jp" (**) Option "xkb_variant" "106" (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "thinkpad60" (**) Option "xkb_layout" "jp" (**) Option "xkb_variant" "106" (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5) (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall" (**) TPPS/2 IBM TrackPoint: always reports core events (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event5" (II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons (II) TPPS/2 IBM TrackPoint: Found relative axes (II) TPPS/2 IBM TrackPoint: Found x and y relative axes (II) TPPS/2 IBM TrackPoint: Configuring as mouse (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5 (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE) (II) TPPS/2 IBM TrackPoint: initialized for relative axes. (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device PC Speaker (/dev/input/event4) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6) (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall" (**) ThinkPad Extra Buttons: always reports core events (**) ThinkPad Extra Buttons: Device: "/dev/input/event6" (II) ThinkPad Extra Buttons: Found keys (II) ThinkPad Extra Buttons: Configuring as keyboard (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "thinkpad60" (**) Option "xkb_layout" "jp" (**) Option "xkb_variant" "106" (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event13) (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall" (**) ACPI Virtual Keyboard Device: always reports core events (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event13" (II) ACPI Virtual Keyboard Device: Found keys (II) ACPI Virtual Keyboard Device: Configuring as keyboard (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "thinkpad60" (**) Option "xkb_layout" "jp" (**) Option "xkb_variant" "106" (II) intel(0): EDID vendor "LEN", prod id 16400 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz) (II) intel(0): EDID vendor "LEN", prod id 16400 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz) (II) intel(0): EDID vendor "LEN", prod id 16400 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz) (II) intel(0): EDID vendor "LEN", prod id 16400 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz) (II) intel(0): EDID vendor "LEN", prod id 16400 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz) (WW) intel(0): intel_uxa_prepare_access: bo map failed: Invalid argument
Attachment:
Xorg.0.log.bad
Description: application/trash