Bug#596064: /usr/bin/X hangs after return from suspend [i965]

To: Debian Bug Tracking System <596064@bugs.debian.org>
Subject: Bug#596064: /usr/bin/X hangs after return from suspend [i965]
From: Karl Ferdinand Ebert <trebefk@googlemail.com>
Date: Tue, 30 Nov 2010 22:36:51 +0100
Message-id: <[🔎] 201011302236.52411.trebefk@gmail.com>
Reply-to: Karl Ferdinand Ebert <trebefk@googlemail.com>, 596064@bugs.debian.org

Package: xserver-xorg
Severity: normal

Hello,

I am using from the uswsusp package s2disk which works for me reliable
enough. Nevertheless I experiencing on an Intel chip an infinity loop 
as detected by the log file Xorg.0.log.old. 

Best regards,

Ferdinand

-- Package-specific info:
/var/lib/x11/X.roster does not exist.

/var/lib/x11/X.md5sum does not exist.

X server symlink status:
lrwxrwxrwx 1 root root 13 Jan 13  2010 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1889472 Nov 12 00:56 /usr/bin/Xorg

/var/lib/x11/xorg.conf.roster does not exist.

VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset 
Integrated Graphics Controller (rev 07)

/var/lib/x11/xorg.conf.md5sum does not exist.

Xorg X server configuration file status:
-rw-r--r-- 1 root root 1774 Jan 29  2010 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"de"
	Option		"XkbVariant"	"nodeadkeys"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "Device"
	Identifier	"Intel Corporation 82G965 Integrated Graphics Controller"
	Driver		"intel"
	BusID		"PCI:0:2:0"
EndSection

Section "Monitor"
	Identifier	"Standardbildschirm"
#	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Intel Corporation 82G965 Integrated Graphics Controller"
	Monitor		"Standardbildschirm"
	DefaultDepth	24
	SubSection "Display"
		Modes		"1280x800" 
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
#	Option	"BlankTime"	"5"
#	Option	"StandbyTime"	"10"
#	Option	"SuspendTime"	"20"
#	Option	"OffTime"	"30"
EndSection


Kernel version (/proc/version):
Linux version 2.6.32-5-amd64 (Debian 2.6.32-28) (ben@decadent.org.uk) (gcc 
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 25 18:02:11 UTC 2010

Xorg X server log files on system:
-rw-r--r-- 1 root root 20334 Sep 26 17:23 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 22400 Nov 30 22:19 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
Current Operating System: Linux Babbage 2.6.32-5-amd64 #1 SMP Thu Nov 25 
18:02:11 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=7b6d34ed-
d2fa-489d-9105-393718e73f6c ro resume=/dev/sda2 video=i915 quiet
Build Date: 11 November 2010  11:44:20PM
xorg-server 2:1.7.7-9 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 30 22:18:50 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Standardbildschirm"
(**) |   |-->Device "Intel Corporation 82G965 Integrated Graphics Controller"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' 
will be disabled.
(WW) Disabling Generic Keyboard
(WW) Disabling Configured Mouse
(II) Loader magic: 0x7c8a40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 Intel Corporation Mobile 4 Series 
Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2000000/4194304, 
0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a43:17aa:20e4 Intel Corporation Mobile 4 Series 
Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 2.13.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
	Sandybridge, Sandybridge
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 using monitor section Standardbildschirm
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface 
/sys/class/backlight/acpi_video0
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output HDMI2 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): Output DP3 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: LEN  Model: 4010  Serial#: 0
(II) intel(0): Year: 2008  Week: 28
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 26  vert.: 16
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.577 redY: 0.338   greenX: 0.310 greenY: 0.563
(II) intel(0): blueX: 0.158 blueY: 0.157   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 75.3 MHz   Image Size:  261 x 163 mm
(II) intel(0): h_active: 1280  h_sync: 1296  h_sync_end 1344 h_blank_end 1512 
h_border: 0
(II) intel(0): v_active: 800  v_sync: 802  v_sync_end 804 v_blanking: 830 
v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 59.3 MHz   Image Size:  261 x 163 mm
(II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 
h_border: 0
(II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 
v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0):  LTD121EWVB
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff0030ae104000000000
(II) intel(0): 	1c120103801a1078eae59593564f9028
(II) intel(0): 	28505400000001010101010101010101
(II) intel(0): 	0101010101016a1d00e850201e301030
(II) intel(0): 	220005a310000018261700a050201730
(II) intel(0): 	3020360005a3100000180000000f0081
(II) intel(0): 	0a3c810a3216010030640055000000fe
(II) intel(0): 	004c5444313231455756420a20200084
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0   75.30  1280 1296 1344 1512  800 802 
804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x50.0   59.26  1280 1328 1360 1440  800 803 
809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 
625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 
-hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output HDMI2
(II) intel(0): EDID for output DP2
(II) intel(0): EDID for output DP3
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output HDMI2 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Output DP3 disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): [DRI2] Setup complete
(II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(II)         put_image
(II)         get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): [XvMC] xvmc_vld driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Video Bus (/dev/input/event9)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event9"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Lid Switch (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event3)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device UVC Camera (17ef:480c) (/dev/input/event6)
(**) UVC Camera (17ef:480c): Applying InputClass "evdev keyboard catchall"
(**) UVC Camera (17ef:480c): always reports core events
(**) UVC Camera (17ef:480c): Device: "/dev/input/event6"
(II) UVC Camera (17ef:480c): Found keys
(II) UVC Camera (17ef:480c): Configuring as keyboard
(II) XINPUT: Adding extended input device "UVC Camera (17ef:480c)" (type: 
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic (/dev/input/event12)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard 
(/dev/input/event1)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: 
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8)
(**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found relative axes
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, 
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(II) TPPS/2 IBM TrackPoint: initialized for relative axes.
(II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
(**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event7"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: 
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Macintosh mouse button emulation 
(/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer 
catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, 
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" 
(type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation 
(/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ACPI Virtual Keyboard Device 
(/dev/input/event14)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event14"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: 
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 
830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 
823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 
830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 
823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch

udev information:
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: DEVLINKS=/dev/char/13:68
E: XKBOPTIONS=lv3:ralt_switch,terminate:ctrl_alt_bksp
E: DMI_VENDOR=LENOVO

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9
N: input/event9
S: char/13:73
E: UDEV_LOG=3
E: 
DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: DEVLINKS=/dev/char/13:73
E: XKBOPTIONS=lv3:ralt_switch,terminate:ctrl_alt_bksp
E: DMI_VENDOR=LENOVO

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:66

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: DEVLINKS=/dev/char/13:67
E: XKBOPTIONS=lv3:ralt_switch,terminate:ctrl_alt_bksp
E: DMI_VENDOR=LENOVO

P: /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input6/event6
N: input/event6
S: char/13:70
S: input/by-id/usb-Chicony_Electronics_Co.__Ltd._480c-event-if00
S: input/by-path/pci-0000:00:1a.7-usb-0:6:1.0-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Chicony_Electronics_Co.__Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2c\x20Ltd.
E: ID_VENDOR_ID=17ef
E: ID_MODEL=480c
E: ID_MODEL_ENC=480c
E: ID_MODEL_ID=480c
E: ID_REVISION=3134
E: ID_SERIAL=Chicony_Electronics_Co.__Ltd._480c
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1a.7-usb-0:6:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: DEVLINKS=/dev/char/13:70 /dev/input/by-id/usb-
Chicony_Electronics_Co.__Ltd._480c-event-if00 /dev/input/by-
path/pci-0000:00:1a.7-usb-0:6:1.0-event
E: XKBOPTIONS=lv3:ralt_switch,terminate:ctrl_alt_bksp

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event10
N: input/event10
S: char/13:74
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:74
E: TAGS=:udev-acl:

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
N: input/event11
S: char/13:75
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
E: MAJOR=13
E: MINOR=75
E: DEVNAME=/dev/input/event11
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:75
E: TAGS=:udev-acl:

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
N: input/event12
S: char/13:76
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
E: MAJOR=13
E: MINOR=76
E: DEVNAME=/dev/input/event12
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:76
E: TAGS=:udev-acl:

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
N: input/event13
S: char/13:77
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
E: MAJOR=13
E: MINOR=77
E: DEVNAME=/dev/input/event13
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:77
E: TAGS=:udev-acl:

P: /devices/platform/i8042/serio0/input/input1/event1
N: input/event1
S: char/13:65
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: DEVLINKS=/dev/char/13:65 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=lv3:ralt_switch,terminate:ctrl_alt_bksp
E: DMI_VENDOR=LENOVO

P: /devices/platform/i8042/serio1/input/input8/event8
N: input/event8
S: char/13:72
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:72 /dev/input/by-path/platform-i8042-serio-1-event-
mouse

P: /devices/platform/i8042/serio1/input/input8/mouse1
N: input/mouse1
S: char/13:33
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input8/mouse1
E: MAJOR=13
E: MINOR=33
E: DEVNAME=/dev/input/mouse1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DEVLINKS=/dev/char/13:33 /dev/input/by-path/platform-i8042-serio-1-mouse

P: /devices/platform/pcspkr/input/input5/event5
N: input/event5
S: char/13:69
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:69 /dev/input/by-path/platform-pcspkr-event-spkr

P: /devices/platform/thinkpad_acpi/input/input7/event7
N: input/event7
S: char/13:71
S: input/by-path/platform-thinkpad_acpi-event
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/thinkpad_acpi/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-thinkpad_acpi
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: DEVLINKS=/dev/char/13:71 /dev/input/by-path/platform-thinkpad_acpi-event
E: XKBOPTIONS=lv3:ralt_switch,terminate:ctrl_alt_bksp
E: DMI_VENDOR=LENOVO

P: /devices/virtual/input/input0/event0
N: input/event0
S: char/13:64
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:64

P: /devices/virtual/input/input0/mouse0
N: input/mouse0
S: char/13:32
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input0/mouse0
E: MAJOR=13
E: MINOR=32
E: DEVNAME=/dev/input/mouse0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: DEVLINKS=/dev/char/13:32

P: /devices/virtual/input/input15/event14
N: input/event14
S: char/13:78
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input15/event14
E: MAJOR=13
E: MINOR=78
E: DEVNAME=/dev/input/event14
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=de
E: DEVLINKS=/dev/char/13:78
E: XKBOPTIONS=lv3:ralt_switch,terminate:ctrl_alt_bksp
E: DMI_VENDOR=LENOVO

DRM Information from dmesg:
[    8.191254] [drm] Initialized drm 1.1.0 20060810
[    8.340349] [drm] set up 31M of stolen space
[    9.193298] fb0: inteldrmfb frame buffer device
[    9.198398] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 
'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages xserver-xorg depends on:
ii  libc6                         2.11.2-7   Embedded GNU C Library: Shared lib
ii  x11-xkb-utils                 7.5+5      X11 XKB utilities
ii  xkb-data                      1.8-2      X Keyboard Extension (XKB) configu
ii  xserver-xorg-core             2:1.7.7-9  Xorg X server - core server
ii  xserver-xorg-input-evdev [xse 1:2.3.2-6  X.Org X server -- evdev input driv
ii  xserver-xorg-video-intel [xse 2:2.13.0-2 X.Org X server -- Intel i8xx, i9xx

Versions of packages xserver-xorg recommends:
ii  libgl1-mesa-dri               7.7.1-4    A free implementation of the OpenG

xserver-xorg suggests no packages.

-- no debconf information

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
Current Operating System: Linux Babbage 2.6.32-5-amd64 #1 SMP Thu Nov 25 18:02:11 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=7b6d34ed-d2fa-489d-9105-393718e73f6c ro resume=/dev/sda2 video=i915 quiet
Build Date: 11 November 2010  11:44:20PM
xorg-server 2:1.7.7-9 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 28 19:16:24 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Standardbildschirm"
(**) |   |-->Device "Intel Corporation 82G965 Integrated Graphics Controller"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Generic Keyboard
(WW) Disabling Configured Mouse
(II) Loader magic: 0x7c8a40
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a43:17aa:20e4 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 2.13.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
	Sandybridge, Sandybridge
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 using monitor section Standardbildschirm
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output HDMI2 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): Output DP3 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: LEN  Model: 4010  Serial#: 0
(II) intel(0): Year: 2008  Week: 28
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 26  vert.: 16
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.577 redY: 0.338   greenX: 0.310 greenY: 0.563
(II) intel(0): blueX: 0.158 blueY: 0.157   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 75.3 MHz   Image Size:  261 x 163 mm
(II) intel(0): h_active: 1280  h_sync: 1296  h_sync_end 1344 h_blank_end 1512 h_border: 0
(II) intel(0): v_active: 800  v_sync: 802  v_sync_end 804 v_blanking: 830 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 59.3 MHz   Image Size:  261 x 163 mm
(II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0):  LTD121EWVB
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff0030ae104000000000
(II) intel(0): 	1c120103801a1078eae59593564f9028
(II) intel(0): 	28505400000001010101010101010101
(II) intel(0): 	0101010101016a1d00e850201e301030
(II) intel(0): 	220005a310000018261700a050201730
(II) intel(0): 	3020360005a3100000180000000f0081
(II) intel(0): 	0a3c810a3216010030640055000000fe
(II) intel(0): 	004c5444313231455756420a20200084
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x50.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output HDMI2
(II) intel(0): EDID for output DP2
(II) intel(0): EDID for output DP3
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output HDMI2 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Output DP3 disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): [DRI2] Setup complete
(II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(II)         put_image
(II)         get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): [XvMC] xvmc_vld driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Video Bus (/dev/input/event9)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event9"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Lid Switch (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event3)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device UVC Camera (17ef:480c) (/dev/input/event6)
(**) UVC Camera (17ef:480c): Applying InputClass "evdev keyboard catchall"
(**) UVC Camera (17ef:480c): always reports core events
(**) UVC Camera (17ef:480c): Device: "/dev/input/event6"
(II) UVC Camera (17ef:480c): Found keys
(II) UVC Camera (17ef:480c): Configuring as keyboard
(II) XINPUT: Adding extended input device "UVC Camera (17ef:480c)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic (/dev/input/event12)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event13)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8)
(**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found relative axes
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(II) TPPS/2 IBM TrackPoint: initialized for relative axes.
(II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
(**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event7"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event14)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event14"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) config/udev: removing device ACPI Virtual Keyboard Device
(II) ACPI Virtual Keyboard Device: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event14)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event14"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) Open ACPI successful (/var/run/acpid.socket)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) config/udev: Adding input device MLK wireless mouse (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device MLK wireless mouse (/dev/input/event15)
(**) MLK wireless mouse: Applying InputClass "evdev pointer catchall"
(**) MLK wireless mouse: Applying InputClass "evdev keyboard catchall"
(**) MLK wireless mouse: always reports core events
(**) MLK wireless mouse: Device: "/dev/input/event15"
(II) MLK wireless mouse: Found 9 mouse buttons
(II) MLK wireless mouse: Found scroll wheel(s)
(II) MLK wireless mouse: Found relative axes
(II) MLK wireless mouse: Found x and y relative axes
(II) MLK wireless mouse: Found absolute axes
(II) MLK wireless mouse: Found keys
(II) MLK wireless mouse: Configuring as mouse
(II) MLK wireless mouse: Configuring as keyboard
(**) MLK wireless mouse: YAxisMapping: buttons 4 and 5
(**) MLK wireless mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "MLK wireless mouse" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) MLK wireless mouse: initialized for relative axes.
(WW) MLK wireless mouse: ignoring absolute axes.
(II) config/udev: removing device MLK wireless mouse
(II) MLK wireless mouse: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
[mi] EQ overflowing. The server is probably stuck in an infinite loop.

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x4667a8]
1: /usr/bin/X (mieqEnqueue+0x1f4) [0x45f8c4]
2: /usr/bin/X (xf86PostMotionEventP+0xc4) [0x479b94]
3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f4ed61d7000+0x52ef) [0x7f4ed61dc2ef]
4: /usr/bin/X (0x400000+0x7c1a7) [0x47c1a7]
5: /usr/bin/X (0x400000+0x119d43) [0x519d43]
6: /lib/libpthread.so.0 (0x7f4eda4c6000+0xef60) [0x7f4eda4d4f60]
7: /lib/libc.so.6 (__libc_fork+0xb4) [0x7f4ed904c874]
8: /usr/bin/X (Popen+0xa2) [0x460762]
9: /usr/bin/X (XkbDDXLoadKeymapByNames+0x19f) [0x4f406f]
10: /usr/bin/X (0x400000+0x1036ce) [0x5036ce]
11: /usr/bin/X (0x400000+0x4c734) [0x44c734]
12: /usr/bin/X (0x400000+0x25c35) [0x425c35]
13: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f4ed8fcac4d]
14: /usr/bin/X (0x400000+0x257e9) [0x4257e9]
[mi] EQ overflowing. The server is probably stuck in an infinite loop.

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x4667a8]
1: /usr/bin/X (mieqEnqueue+0x1f4) [0x45f8c4]
2: /usr/bin/X (xf86PostMotionEventP+0xc4) [0x479b94]
3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f4ed61d7000+0x52ef) [0x7f4ed61dc2ef]
4: /usr/bin/X (0x400000+0x7c1a7) [0x47c1a7]
5: /usr/bin/X (0x400000+0x119d43) [0x519d43]
6: /lib/libpthread.so.0 (0x7f4eda4c6000+0xef60) [0x7f4eda4d4f60]
7: /lib/libc.so.6 (__libc_fork+0xb4) [0x7f4ed904c874]
8: /usr/bin/X (Popen+0xa2) [0x460762]
9: /usr/bin/X (XkbDDXLoadKeymapByNames+0x19f) [0x4f406f]
10: /usr/bin/X (0x400000+0x1036ce) [0x5036ce]
11: /usr/bin/X (0x400000+0x4c734) [0x44c734]
12: /usr/bin/X (0x400000+0x25c35) [0x425c35]
13: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f4ed8fcac4d]
14: /usr/bin/X (0x400000+0x257e9) [0x4257e9]
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   75.30  1280 1296 1344 1512  800 802 804 830 -hsync -vsync (49.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   59.26  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (41.2 kHz)
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) UVC Camera (17ef:480c): Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) Error compiling keymap (server-0)
(EE) XKB: Couldn't compile keymap
(II) ACPI Virtual Keyboard Device: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) ThinkPad Extra Buttons: Close
(II) UnloadModule: "evdev"
(II) TPPS/2 IBM TrackPoint: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) UVC Camera (17ef:480c): Close
(II) UnloadModule: "evdev"
(II) Sleep Button: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"

Reply to:

Prev by Date: Bug#604974: WISHLIST: does not start without monitor connected
Next by Date: Processed: changing submitter to my permanent address
Previous by thread: Bug#453007: xbacklight: Also on nc10
Next by thread: Processed: changing submitter to my permanent address
Index(es):
- Date
- Thread