Bug#601225: i915: Screen not refreshed with "GTT full, but LRU list empty" error
Package: xserver-xorg-video-intel
Version: 2:2.12.0+shadow-2
Severity: grave
File: i915
Justification: renders package unusable
i915 corrupts screen randomly by filling the dmesg log with the
following error
[ 2025.202526] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but
LRU list
empty
[ 2025.202529] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12
[ 2025.202532] [drm:i915_gem_execbuffer] *ERROR* Failed to pin buffers -12
Restarting gdm does not recover the system.
Reboot recovers the system but the error appears again.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Sep 21 2009 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1733468 Oct 10 14:03 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller (rev 04)
/etc/X11/xorg.conf does not exist.
Kernel version (/proc/version):
Linux version 2.6.30-1-686 (Debian 2.6.30-6) (waldi@debian.org) (gcc
version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 19:11:58 UTC 2009
Xorg X server log files on system:
-rw-r--r-- 1 root root 30835 Oct 24 15:07 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.23-dsa-ia32 i686 Debian
Current Operating System: Linux hydra 2.6.30-1-686 #1 SMP Sat Aug 15
19:11:58 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-1-686
root=UUID=b4578ec5-93a7-43ab-9ec6-1ce8c86b90ed ro quiet
Build Date: 10 October 2010 11:57:07AM
xorg-server 2:1.7.7-8 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 24 14:34:11 2010
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
(II) Loader magic: 0x81ecca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2592:17ff:058c Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller rev 4, Mem @
0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @
0x00001800/8
(--) PCI: (0:0:2:1) 8086:2792:17ff:058c Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0x8c000000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.12.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(EE) open /dev/fb0: No such file or directory
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "320x175" (doublescan mode not
supported)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "320x200" (doublescan mode not
supported)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "360x200" (doublescan mode not
supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not
supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not
supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not
supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not
supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not
supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not
supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not
supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not
supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not
supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not
supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1600x1200" (hsync out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1792x1344" (hsync out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1856x1392" (hsync out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not
supported)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "416x312" (doublescan mode not
supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't
support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not
supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1400x1050" (hsync out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1440x900" (hsync out of range)
(II) intel(0): Not using default mode "720x450" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1600x1024" (hsync out of range)
(II) intel(0): Not using default mode "800x512" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1920x1080" (hsync out of range)
(II) intel(0): Not using default mode "960x540" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1920x1200" (hsync out of range)
(II) intel(0): Not using default mode "960x600" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not
supported)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not
supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not
supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not
supported)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776
768 771 781 798 -hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520
864 865 868 895 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344
768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600
601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490
492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: AUO Model: 1874 Serial#: 0
(II) intel(0): Year: 2005 Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.310 greenY: 0.560
(II) intel(0): blueX: 0.150 blueY: 0.115 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end
1408 h_border: 0
(II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking:
816 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): AUO
(II) intel(0): B154EW01 V8
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0006af741800000000
(II) intel(0): 010f0103802115780a85a599574f8f26
(II) intel(0): 1d505400000001010101010101010101
(II) intel(0): 010101010101ea1a0080502010301520
(II) intel(0): 44004bcf100000180000000f00000000
(II) intel(0): 00000000000000000002000000fe0041
(II) intel(0): 554f0a202020202020202020000000fe
(II) intel(0): 004231353445573031205638200a00ce
(II) intel(0): Not using default mode "320x240" (doublescan mode not
supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not
supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not
supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not
supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not
supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not
supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not
supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not
supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not
supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not
supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not
supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not
supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not
supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not
supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not
supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not
supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not
supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not
supported)
(II) intel(0): Not using default mode "960x540" (doublescan mode not
supported)
(II) intel(0): Not using default mode "960x600" (doublescan mode not
supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not
supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408
800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344
768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600
601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600
601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490
492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output TV1
(II) intel(0): Output VGA1 connected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output VGA1 using initial mode 1024x768
(II) intel(0): Output LVDS1 using initial mode 1024x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise
stated.
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled
message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_variant" "cat"
(II) config/udev: Adding input device Power Button (/dev/input/event5)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_variant" "cat"
(II) config/udev: Adding input device Lid Switch (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event6)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event6"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_variant" "cat"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech USB Laser Mouse
(/dev/input/event1)
(**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech USB Laser Mouse: always reports core events
(**) Logitech USB Laser Mouse: Device: "/dev/input/event1"
(II) Logitech USB Laser Mouse: Found 12 mouse buttons
(II) Logitech USB Laser Mouse: Found scroll wheel(s)
(II) Logitech USB Laser Mouse: Found relative axes
(II) Logitech USB Laser Mouse: Found x and y relative axes
(II) Logitech USB Laser Mouse: Configuring as mouse
(**) Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Laser Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Laser Mouse"
(type: MOUSE)
(II) Logitech USB Laser Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB Laser Mouse
(/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard
catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard"
(type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_variant" "cat"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/event7)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad
catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event7"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad"
(type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/mouse1)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
SynPS/2 Synaptics TouchPad no synaptics event device found
(**) Option "Device" "/dev/input/mouse1"
Query no Synaptics: 6003C8
(--) SynPS/2 Synaptics TouchPad: no supported touchpad found
(EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics
hardware.
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device PC Speaker (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ACPI Virtual Keyboard Device
(/dev/input/event9)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard
catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event9"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device"
(type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_variant" "cat"
(II) intel(0): EDID vendor "AUO", prod id 6260
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800
804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 6260
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800
804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 6260
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800
804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
(II) intel(0): EDID vendor "AUO", prod id 6260
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800
804 808 816 -hsync -vsync (48.9 kHz)
(EE) intel(0): Failed to submit batch buffer, expect rendering
corruption or even a frozen display: Cannot allocate memory.
(EE) intel(0): Failed to submit batch buffer, expect rendering
corruption or even a frozen display: Cannot allocate memory.
(EE) intel(0): Failed to submit batch buffer, expect rendering
corruption or even a frozen display: Cannot allocate memory.
(EE) intel(0): Failed to submit batch buffer, expect rendering
corruption or even a frozen display: Cannot allocate memory.
udev information:
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: XKBVARIANT=cat
E: MAJOR=13
E: MINOR=67
E: DEVLINKS=/dev/char/13:67
E: DMI_VENDOR=BenQ
P: /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5
N: input/event5
S: char/13:69
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: XKBVARIANT=cat
E: MAJOR=13
E: MINOR=69
E: DEVLINKS=/dev/char/13:69
E: DMI_VENDOR=BenQ
P: /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4/event4
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event4
E: ID_INPUT=1
E: DMI_VENDOR=BenQ
E: MAJOR=13
E: MINOR=68
E: DEVLINKS=/dev/char/13:68
P: /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6
N: input/event6
S: char/13:70
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: XKBVARIANT=cat
E: MAJOR=13
E: MINOR=70
E: DEVLINKS=/dev/char/13:70
E: DMI_VENDOR=BenQ
P: /devices/pci0000:00/0000:00:1b.0/input/input8/event8
N: input/event8
S: char/13:72
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input8/event8
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event8
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=BenQ
E: MAJOR=13
E: MINOR=72
E: DEVLINKS=/dev/char/13:72
P: /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/event1
N: input/event1
S: char/13:65
S: input/by-id/usb-Logitech_USB_Laser_Mouse-event-mouse
S: input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-event-mouse
E: UDEV_LOG=3
E:
DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/event1
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event1
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB_Laser_Mouse
E: ID_MODEL_ENC=USB\x20Laser\x20Mouse
E: ID_MODEL_ID=c062
E: ID_REVISION=3100
E: ID_SERIAL=Logitech_USB_Laser_Mouse
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.1-usb-0:2:1.0
E: MAJOR=13
E: MINOR=65
E: DEVLINKS=/dev/char/13:65
/dev/input/by-id/usb-Logitech_USB_Laser_Mouse-event-mouse
/dev/input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-event-mouse
P: /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/mouse0
N: input/mouse0
S: char/13:32
S: input/by-id/usb-Logitech_USB_Laser_Mouse-mouse
S: input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-mouse
E: UDEV_LOG=3
E:
DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1/mouse0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB_Laser_Mouse
E: ID_MODEL_ENC=USB\x20Laser\x20Mouse
E: ID_MODEL_ID=c062
E: ID_REVISION=3100
E: ID_SERIAL=Logitech_USB_Laser_Mouse
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.1-usb-0:2:1.0
E: MAJOR=13
E: MINOR=32
E: DEVLINKS=/dev/char/13:32
/dev/input/by-id/usb-Logitech_USB_Laser_Mouse-mouse
/dev/input/by-path/pci-0000:00:1d.1-usb-0:2:1.0-mouse
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: XKBVARIANT=cat
E: MAJOR=13
E: MINOR=64
E: DEVLINKS=/dev/char/13:64
/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DMI_VENDOR=BenQ
P: /devices/platform/i8042/serio1/input/input7/event7
N: input/event7
S: char/13:71
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input7/event7
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event7
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DMI_VENDOR=BenQ
E: MAJOR=13
E: MINOR=71
E: DEVLINKS=/dev/char/13:71
/dev/input/by-path/platform-i8042-serio-1-event-mouse
P: /devices/platform/i8042/serio1/input/input7/mouse1
N: input/mouse1
S: char/13:33
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input7/mouse1
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/mouse1
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: MAJOR=13
E: MINOR=33
E: DEVLINKS=/dev/char/13:33 /dev/input/by-path/platform-i8042-serio-1-mouse
P: /devices/platform/pcspkr/input/input2/event2
N: input/event2
S: char/13:66
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input2/event2
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event2
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=BenQ
E: MAJOR=13
E: MINOR=66
E: DEVLINKS=/dev/char/13:66 /dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/virtual/input/input9/event9
N: input/event9
S: char/13:73
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input9/event9
E: SUBSYSTEM=input
E: DEVNAME=/dev/input/event9
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: XKBVARIANT=cat
E: MAJOR=13
E: MINOR=73
E: DEVLINKS=/dev/char/13:73
E: DMI_VENDOR=BenQ
DRM Information from dmesg:
[ 9.752081] Linux agpgart interface v0.103
[ 9.779445] intelfb: cannot acquire agp
[ 9.897787] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 9.898382] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 9.901037] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 25.862975] [drm] Initialized drm 1.1.0 20060810
[ 26.974223] fb0: inteldrmfb frame buffer device
[ 26.974254] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 27.037932] [drm] LVDS-8: set mode 1280x800 16
[ 28.975001] [drm] DAC-6: set mode 1024x768 21
[ 29.271803] [drm] LVDS-8: set mode 1024x768 22
[ 49.447359] [drm] LVDS-8: set mode 20
[ 2025.110760] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but
LRU list empty
[ 2025.110772] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12
[ 2025.110980] [drm:i915_gem_evict_something] *ERROR* inactive empty 1
request empty 1 flushing empty 1
[ 2025.111500] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but
LRU list empty
[ 2025.111506] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12
[ 2025.111512] [drm:i915_gem_execbuffer] *ERROR* Failed to pin buffers -12
[ 2025.172607] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but
LRU list empty
[ 2025.172614] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12
[ 2025.178215] [drm:i915_gem_evict_something] *ERROR* inactive empty 1
request empty 1 flushing empty 1
[ 2025.178466] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but
LRU list empty
[ 2025.178469] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12
[ 2025.178472] [drm:i915_gem_execbuffer] *ERROR* Failed to pin buffers -12
[ 2025.202124] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but
LRU list empty
[ 2025.202131] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12
[ 2025.202278] [drm:i915_gem_evict_something] *ERROR* inactive empty 1
request empty 1 flushing empty 1
[ 2025.202526] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but
LRU list empty
[ 2025.202529] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12
[ 2025.202532] [drm:i915_gem_execbuffer] *ERROR* Failed to pin buffers -12
[ 2025.278494] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but
LRU list empty
[ 2025.278501] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12
[ 2025.284236] [drm:i915_gem_evict_something] *ERROR* inactive empty 1
request empty 1 flushing empty 1
[ 2025.284518] [drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but
LRU list empty
[ 2025.284521] [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12
[ 2025.284524] [drm:i915_gem_execbuffer] *ERROR* Failed to pin buffers -12
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.ISO-8859-15, LC_CTYPE=en_US.ISO-8859-15
(charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.11.2-6+squeeze1 Embedded GNU C Library:
Shared lib
ii libdrm-intel1 2.4.21-1~squeeze3 Userspace interface to
intel-speci
ii libdrm2 2.4.21-1~squeeze3 Userspace interface to
kernel DRM
ii libpciaccess0 0.12.0-1 Generic PCI access library
for X
ii libx11-6 2:1.3.3-3 X11 client-side library
ii libx11-xcb1 2:1.3.3-3 Xlib/XCB interface library
ii libxcb-aux0 0.3.6-1 utility libraries for X C
Binding
ii libxcb-dri2-0 1.6-1 X C Binding, dri2 extension
ii libxcb1 1.6-1 X C Binding
ii libxext6 2:1.1.2-1 X11 miscellaneous extension
librar
ii libxfixes3 1:4.0.5-1 X11 miscellaneous 'fixes'
extensio
ii libxv1 2:1.0.5-1 X11 Video extension library
ii libxvmc1 2:1.0.5-1 X11 Video extension library
ii xserver-xorg-core [xor 2:1.7.7-8 Xorg X server - core server
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
Reply to: