Bug#597699: [xserver-xorg-video-intel] X does not start at system startup (but does so later)
[Julien Cristau - Mittwoch 22 September 2010 13:10:45]
> On Wed, Sep 22, 2010 at 12:48:47 +0200, Frederik Schwarzer wrote:
>
> > Package: xserver-xorg-video-intel
> > Version: 2:2.12.0+shadow-1
> > Severity: normal
> >
> > --- Please enter the report below this line. ---
> >
> > If my system boots, it should start KDM for login. This does
> > not work now since approximately when the new boot sequence
> > dependency stuff was introduced in Sid. I talked to some
> > people and they said, the problem would be the intel driver
> > not initializing fast enough. So, here's what I experience.
> >
> > On system startup, X tries to start, but doesn't.
> > If I then log in and start X manually, it works.
> >
> > If I do not have a network cable plugged in at boot time,
> > DHCP takes its time and X starts properly afterwards.
> >
> > Do you have any idea if this could be related to the intel driver?
> >
> No.
>
> > I could send you both Xorg.logs if you are interested.
> >
> Send dmesgs too.
Attached.
For reference, the "failing" were on system boot with Ethernet plugged-in;
the "succeeding" were on system boot with Ethernet plugged-out.
Thanks for looking into the issue. :)
And for better digesting, here are the diffs:
--- xorg.log_failing_X.txt 2010-09-22 13:36:10.000000000 +0200
+++ xorg.log_succeeding_X.txt 2010-09-22 13:36:10.000000000 +0200
@@ -13,7 +13,7 @@
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
-(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 22 13:25:35 2010
+(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 22 13:29:17 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
@@ -402,18 +402,4 @@
(EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
(II) UnloadModule: "synaptics"
-(II) Power Button: Close
-(II) UnloadModule: "evdev"
-(II) Video Bus: Close
-(II) UnloadModule: "evdev"
-(II) Sleep Button: Close
-(II) UnloadModule: "evdev"
-(II) HID 046a:002b: Close
-(II) UnloadModule: "evdev"
-(II) HID 046a:002b: Close
-(II) UnloadModule: "evdev"
-(II) Logitech USB-PS/2 Optical Mouse: Close
-(II) UnloadModule: "evdev"
-(II) AT Translated Set 2 keyboard: Close
-(II) UnloadModule: "evdev"
-(II) UnloadModule: "synaptics"
+(II) AIGLX: Suspending AIGLX clients for VT switch
--- dmesg_failing_X.txt 2010-09-22 13:36:10.000000000 +0200
+++ dmesg_succeeding_X.txt 2010-09-22 13:36:10.000000000 +0200
@@ -1,4 +1,6 @@
-OOTMEM
+3000 - 0001d23000] BOOTMEM
+ #26 [0001d23000 - 0001da3000] BOOTMEM
+ #27 [0001da3000 - 0001e23000] BOOTMEM
#28 [0001e23000 - 0001ea3000] BOOTMEM
#29 [0001ea3000 - 0001f23000] BOOTMEM
#30 [0001f23000 - 0001fa3000] BOOTMEM
@@ -82,8 +84,8 @@
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
-Detected 1995.302 MHz processor.
-Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.60 BogoMIPS (lpj=1995302)
+Detected 1995.232 MHz processor.
+Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.46 BogoMIPS (lpj=1995232)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
@@ -109,7 +111,7 @@
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
Brought up 2 CPUs
-Total of 2 processors activated (7980.40 BogoMIPS).
+Total of 2 processors activated (7980.26 BogoMIPS).
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
@@ -398,11 +400,11 @@
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
thermal LNXTHERM:01: registered as thermal_zone0
-ACPI: Thermal Zone [TZ0] (67 C)
+ACPI: Thermal Zone [TZ0] (65 C)
thermal LNXTHERM:02: registered as thermal_zone1
-ACPI: Thermal Zone [TZ1] (69 C)
+ACPI: Thermal Zone [TZ1] (66 C)
thermal LNXTHERM:03: registered as thermal_zone2
-ACPI: Thermal Zone [TZ3] (47 C)
+ACPI: Thermal Zone [TZ3] (46 C)
thermal LNXTHERM:04: registered as thermal_zone3
ACPI: Thermal Zone [TZ4] (26 C)
thermal LNXTHERM:05: registered as thermal_zone4
@@ -569,8 +571,8 @@
ata1.00: configured for UDMA/100
ata1: EH complete
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
-sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
+sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
@@ -609,5 +611,3 @@
Adding 2650688k swap on /dev/sda5. Priority:-1 extents:1 across:2650688k
EXT3-fs (sda1): using internal journal
tg3 0000:18:00.0: irq 48 for MSI/MSI-X
-tg3 0000:18:00.0: eth0: Link is up at 100 Mbps, full duplex
-tg3 0000:18:00.0: eth0: Flow control is on for TX and on for RX
OOTMEM
#28 [0001e23000 - 0001ea3000] BOOTMEM
#29 [0001ea3000 - 0001f23000] BOOTMEM
#30 [0001f23000 - 0001fa3000] BOOTMEM
#31 [0001fa3000 - 0002023000] BOOTMEM
#32 [0002023000 - 00020a3000] BOOTMEM
#33 [00020a3000 - 0002123000] BOOTMEM
#34 [0002123000 - 00021a3000] BOOTMEM
#35 [00021a3000 - 0002223000] BOOTMEM
#36 [0002223000 - 00022a3000] BOOTMEM
#37 [00022a3000 - 0002323000] BOOTMEM
#38 [0002323000 - 00023a3000] BOOTMEM
#39 [00023a3000 - 0002423000] BOOTMEM
#40 [0002423000 - 00024a3000] BOOTMEM
#41 [00024a3000 - 0002523000] BOOTMEM
#42 [0002523000 - 00025a3000] BOOTMEM
#43 [00025a3000 - 0002623000] BOOTMEM
#44 [0002623000 - 00026a3000] BOOTMEM
#45 [00026a3000 - 0002723000] BOOTMEM
#46 [0002723000 - 00027a3000] BOOTMEM
#47 [00027a3000 - 0002823000] BOOTMEM
#48 [0002823000 - 00028a3000] BOOTMEM
#49 [00028a3000 - 0002923000] BOOTMEM
#50 [0002923000 - 00029a3000] BOOTMEM
#51 [00029a3000 - 0002a23000] BOOTMEM
#52 [0002a23000 - 0002aa3000] BOOTMEM
#53 [0002aa3000 - 0002b23000] BOOTMEM
#54 [0002b23000 - 0002ba3000] BOOTMEM
#55 [0002ba3000 - 0002c23000] BOOTMEM
#56 [0002c23000 - 0002ca3000] BOOTMEM
#57 [0002ca3000 - 0002d23000] BOOTMEM
#58 [000151ab40 - 000151ac00] BOOTMEM
#59 [0002d23000 - 0002d26000] BOOTMEM
#60 [0002d26000 - 0002d32000] BOOTMEM
#61 [000151ac00 - 000151ac25] BOOTMEM
#62 [000151adc0 - 000151ade7] BOOTMEM
#63 [000151ae00 - 000151af88] BOOTMEM
#64 [000151afc0 - 000151b000] BOOTMEM
#65 [0001521180 - 00015211c0] BOOTMEM
#66 [00015211c0 - 0001521200] BOOTMEM
#67 [0001521200 - 0001521240] BOOTMEM
#68 [0001521240 - 0001521280] BOOTMEM
#69 [0001521280 - 00015212c0] BOOTMEM
#70 [00015212c0 - 0001521300] BOOTMEM
#71 [0001521300 - 0001521340] BOOTMEM
#72 [0001521340 - 0001521380] BOOTMEM
#73 [0001521380 - 00015213c0] BOOTMEM
#74 [00015213c0 - 0001521400] BOOTMEM
#75 [0001521400 - 0001521440] BOOTMEM
#76 [0001521440 - 0001521480] BOOTMEM
#77 [0001521480 - 00015214bb] BOOTMEM
#78 [00015214c0 - 00015214fb] BOOTMEM
#79 [0003000000 - 000300c000] BOOTMEM
#80 [0003200000 - 000320c000] BOOTMEM
#81 [0001521500 - 0001521504] BOOTMEM
#82 [0001521540 - 0001521544] BOOTMEM
#83 [0001521580 - 0001521588] BOOTMEM
#84 [00015215c0 - 00015215c8] BOOTMEM
#85 [0001521600 - 00015216a8] BOOTMEM
#86 [00015216c0 - 0001521728] BOOTMEM
#87 [0002d32000 - 0002d36000] BOOTMEM
#88 [0002d36000 - 0002db6000] BOOTMEM
#89 [0002db6000 - 0002df6000] BOOTMEM
Initializing HighMem for node 0 (000377fe:000bf7b0)
Memory: 3106020k/3137216k available (3253k kernel code, 30804k reserved, 1407k data, 344k init, 2227912k highmem)
virtual kernel memory layout:
fixmap : 0xfff8e000 - 0xfffff000 ( 452 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc148e000 - 0xc14e4000 ( 344 kB)
.data : 0xc132d686 - 0xc148d568 (1407 kB)
.text : 0xc1000000 - 0xc132d686 (3253 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:320
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1995.302 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.60 BogoMIPS (lpj=1995302)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100428
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
Brought up 2 CPUs
Total of 2 processors activated (7980.40 BogoMIPS).
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT bf7db4ce 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
ACPI: SSDT bf7db7d2 004BA (v01 HP Cpu0Cst 00003001 INTL 20060317)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 004BA (v01 HP Cpu0Cst 00003001 INTL 20060317)
ACPI: SSDT bf7db406 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
ACPI: SSDT bf7db74d 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [C298] (on)
ACPI: Power Resource [C1C2] (off)
ACPI: Power Resource [C3B5] (off)
ACPI: Power Resource [C3B6] (off)
ACPI: Power Resource [C3B7] (off)
ACPI: Power Resource [C3B8] (off)
ACPI: Power Resource [C3B9] (off)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xbf800000-0xfedfffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000dffff] (ignored)
pci 0000:00:02.0: reg 10: [mem 0xe4300000-0xe43fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x4000-0x4007]
pci 0000:00:02.1: reg 10: [mem 0xe4400000-0xe44fffff 64bit]
pci 0000:00:1a.0: reg 20: [io 0x4020-0x403f]
pci 0000:00:1a.1: reg 20: [io 0x4040-0x405f]
pci 0000:00:1a.7: reg 10: [mem 0xe4500000-0xe45003ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xe4504000-0xe4507fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x4060-0x407f]
pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f]
pci 0000:00:1d.2: reg 20: [io 0x40a0-0x40bf]
pci 0000:00:1d.7: reg 10: [mem 0xe4508000-0xe45083ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0x40c0-0x40cf]
pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7]
pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7]
pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377]
pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577]
pci 0000:00:1f.2: reg 20: [io 0x4100-0x411f]
pci 0000:00:1f.2: reg 24: [mem 0xe4509000-0xe45097ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:10:00.0: reg 10: [mem 0xe4100000-0xe4100fff]
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 10-10]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:18:00.0: reg 10: [mem 0xe4000000-0xe400ffff 64bit]
pci 0000:18:00.0: PME# supported from D3hot D3cold
pci 0000:18:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 18-18]
pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.4: PCI bridge to [bus 28-28]
pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:04.0: reg 10: [mem 0xe4200000-0xe4200fff]
pci 0000:02:04.0: supports D1 D2
pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe42fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled.
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20100428/pci_link-185)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 00000000bf7b0000 - 00000000bfffffff
cfg80211: Calling CRDA to update world regulatory domain
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved
system 00:09: [io 0x0500-0x057f] has been reserved
system 00:09: [io 0x0800-0x080f] has been reserved
system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x1000-0x107f] has been reserved
system 00:0a: [io 0x1100-0x113f] has been reserved
system 00:0a: [io 0x1200-0x121f] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed99fff] has been reserved
system 00:0b: [mem 0x000cee00-0x000cffff] has been reserved
system 00:0b: [mem 0x000d2a00-0x000d3fff] has been reserved
system 00:0b: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
pci 0000:00:1e.0: BAR 9: assigned [mem 0xc0000000-0xc3ffffff pref]
pci 0000:00:1c.1: BAR 9: assigned [mem 0xc4000000-0xc41fffff 64bit pref]
pci 0000:00:1c.2: BAR 9: assigned [mem 0xc4200000-0xc43fffff 64bit pref]
pci 0000:00:1c.4: BAR 9: assigned [mem 0xc4400000-0xc45fffff 64bit pref]
pci 0000:00:1c.1: BAR 7: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.2: BAR 7: assigned [io 0x6000-0x6fff]
pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff]
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.1: PCI bridge to [bus 10-10]
pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
pci 0000:00:1c.1: bridge window [mem 0xc4000000-0xc41fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 18-18]
pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff]
pci 0000:00:1c.2: bridge window [mem 0xc4200000-0xc43fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 28-28]
pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:1c.4: bridge window [mem 0xc4400000-0xc45fffff 64bit pref]
pci 0000:02:04.0: BAR 9: assigned [mem 0xc0000000-0xc3ffffff pref]
pci 0000:02:04.0: BAR 10: assigned [mem 0xc8000000-0xcbffffff]
pci 0000:02:04.0: BAR 7: assigned [io 0x7000-0x70ff]
pci 0000:02:04.0: BAR 8: assigned [io 0x7400-0x74ff]
pci 0000:02:04.0: CardBus bridge to [bus 03-06]
pci 0000:02:04.0: bridge window [io 0x7000-0x70ff]
pci 0000:02:04.0: bridge window [io 0x7400-0x74ff]
pci 0000:02:04.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
pci 0000:02:04.0: bridge window [mem 0xc8000000-0xcbffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-03]
pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe42fffff]
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:10: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:10: resource 1 [mem 0xe4100000-0xe41fffff]
pci_bus 0000:10: resource 2 [mem 0xc4000000-0xc41fffff 64bit pref]
pci_bus 0000:18: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:18: resource 1 [mem 0xe4000000-0xe40fffff]
pci_bus 0000:18: resource 2 [mem 0xc4200000-0xc43fffff 64bit pref]
pci_bus 0000:28: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff]
pci_bus 0000:28: resource 2 [mem 0xc4400000-0xc45fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe42fffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc3ffffff pref]
pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io 0x7000-0x70ff]
pci_bus 0000:03: resource 1 [io 0x7400-0x74ff]
pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc3ffffff pref]
pci_bus 0000:03: resource 3 [mem 0xc8000000-0xcbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
microcode: CPU0 sig=0x6fa, pf=0x80, revision=0x92
microcode: CPU1 sig=0x6fa, pf=0x80, revision=0x92
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
highmem bounce pool size: 64 pages
msgmni has been set to 1715
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
ACPI: AC Adapter [C236] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [C2C0]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [C153]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [C3BA] (off)
ACPI: Fan [C3BB] (off)
ACPI: Fan [C3BC] (off)
ACPI: Fan [C3BD] (off)
ACPI: Fan [C3BE] (off)
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (67 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ1] (69 C)
thermal LNXTHERM:03: registered as thermal_zone2
ACPI: Thermal Zone [TZ3] (47 C)
thermal LNXTHERM:04: registered as thermal_zone3
ACPI: Thermal Zone [TZ4] (26 C)
thermal LNXTHERM:05: registered as thermal_zone4
ACPI: Thermal Zone [TZ5] (65 C)
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 44 for MSI/MSI-X
[drm] set up 7M of stolen space
ACPI: Battery Slot [C238] (battery present)
ACPI: Battery Slot [C237] (battery absent)
[drm] initialized overlay support
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20100428/exoparg2-418)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C003.C098._DOD] (Node f701f588), AE_AML_PACKAGE_LIMIT
ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20100428/video-1937)
acpi device:00: registered as cooling_device7
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
ACPI: Video Device [C098] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xe4509000 port 0xe4509100 irq 45
ata2: DUMMY
ata3: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
tg3.c:v3.110 (April 9, 2010)
tg3 0000:18:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
tg3 0000:18:00.0: setting latency timer to 64
ata5: port disabled. ignoring.
tg3 0000:18:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:17:a4:e7:c4:fc
tg3 0000:18:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
tg3 0000:18:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
tg3 0000:18:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
iwl3945: Copyright(c) 2003-2010 Intel Corporation
iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:10:00.0: setting latency timer to 64
iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:10:00.0: irq 46 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-3945-rs'
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4500000
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4508000
ata4.00: configured for MWDMA2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:C295,PNP0f13:C296] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata1: EH complete
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NC08 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-3: new high speed USB device using ehci_hcd and address 2
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 344k freed
usb 2-3.3: new low speed USB device using ehci_hcd and address 3
input: HID 046a:002b as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3:1.0/input/input6
generic-usb 0003:046A:002B.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:002b] on usb-0000:00:1d.7-3.3/input0
input: HID 046a:002b as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3:1.1/input/input7
generic-usb 0003:046A:002B.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:002b] on usb-0000:00:1d.7-3.3/input1
usb 2-3.4: new low speed USB device using ehci_hcd and address 4
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.4/2-3.4:1.0/input/input8
generic-usb 0003:046D:C01D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-3.4/input0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
Adding 2650688k swap on /dev/sda5. Priority:-1 extents:1 across:2650688k
EXT3-fs (sda1): using internal journal
tg3 0000:18:00.0: irq 48 for MSI/MSI-X
tg3 0000:18:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:18:00.0: eth0: Flow control is on for TX and on for RX
3000 - 0001d23000] BOOTMEM
#26 [0001d23000 - 0001da3000] BOOTMEM
#27 [0001da3000 - 0001e23000] BOOTMEM
#28 [0001e23000 - 0001ea3000] BOOTMEM
#29 [0001ea3000 - 0001f23000] BOOTMEM
#30 [0001f23000 - 0001fa3000] BOOTMEM
#31 [0001fa3000 - 0002023000] BOOTMEM
#32 [0002023000 - 00020a3000] BOOTMEM
#33 [00020a3000 - 0002123000] BOOTMEM
#34 [0002123000 - 00021a3000] BOOTMEM
#35 [00021a3000 - 0002223000] BOOTMEM
#36 [0002223000 - 00022a3000] BOOTMEM
#37 [00022a3000 - 0002323000] BOOTMEM
#38 [0002323000 - 00023a3000] BOOTMEM
#39 [00023a3000 - 0002423000] BOOTMEM
#40 [0002423000 - 00024a3000] BOOTMEM
#41 [00024a3000 - 0002523000] BOOTMEM
#42 [0002523000 - 00025a3000] BOOTMEM
#43 [00025a3000 - 0002623000] BOOTMEM
#44 [0002623000 - 00026a3000] BOOTMEM
#45 [00026a3000 - 0002723000] BOOTMEM
#46 [0002723000 - 00027a3000] BOOTMEM
#47 [00027a3000 - 0002823000] BOOTMEM
#48 [0002823000 - 00028a3000] BOOTMEM
#49 [00028a3000 - 0002923000] BOOTMEM
#50 [0002923000 - 00029a3000] BOOTMEM
#51 [00029a3000 - 0002a23000] BOOTMEM
#52 [0002a23000 - 0002aa3000] BOOTMEM
#53 [0002aa3000 - 0002b23000] BOOTMEM
#54 [0002b23000 - 0002ba3000] BOOTMEM
#55 [0002ba3000 - 0002c23000] BOOTMEM
#56 [0002c23000 - 0002ca3000] BOOTMEM
#57 [0002ca3000 - 0002d23000] BOOTMEM
#58 [000151ab40 - 000151ac00] BOOTMEM
#59 [0002d23000 - 0002d26000] BOOTMEM
#60 [0002d26000 - 0002d32000] BOOTMEM
#61 [000151ac00 - 000151ac25] BOOTMEM
#62 [000151adc0 - 000151ade7] BOOTMEM
#63 [000151ae00 - 000151af88] BOOTMEM
#64 [000151afc0 - 000151b000] BOOTMEM
#65 [0001521180 - 00015211c0] BOOTMEM
#66 [00015211c0 - 0001521200] BOOTMEM
#67 [0001521200 - 0001521240] BOOTMEM
#68 [0001521240 - 0001521280] BOOTMEM
#69 [0001521280 - 00015212c0] BOOTMEM
#70 [00015212c0 - 0001521300] BOOTMEM
#71 [0001521300 - 0001521340] BOOTMEM
#72 [0001521340 - 0001521380] BOOTMEM
#73 [0001521380 - 00015213c0] BOOTMEM
#74 [00015213c0 - 0001521400] BOOTMEM
#75 [0001521400 - 0001521440] BOOTMEM
#76 [0001521440 - 0001521480] BOOTMEM
#77 [0001521480 - 00015214bb] BOOTMEM
#78 [00015214c0 - 00015214fb] BOOTMEM
#79 [0003000000 - 000300c000] BOOTMEM
#80 [0003200000 - 000320c000] BOOTMEM
#81 [0001521500 - 0001521504] BOOTMEM
#82 [0001521540 - 0001521544] BOOTMEM
#83 [0001521580 - 0001521588] BOOTMEM
#84 [00015215c0 - 00015215c8] BOOTMEM
#85 [0001521600 - 00015216a8] BOOTMEM
#86 [00015216c0 - 0001521728] BOOTMEM
#87 [0002d32000 - 0002d36000] BOOTMEM
#88 [0002d36000 - 0002db6000] BOOTMEM
#89 [0002db6000 - 0002df6000] BOOTMEM
Initializing HighMem for node 0 (000377fe:000bf7b0)
Memory: 3106020k/3137216k available (3253k kernel code, 30804k reserved, 1407k data, 344k init, 2227912k highmem)
virtual kernel memory layout:
fixmap : 0xfff8e000 - 0xfffff000 ( 452 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc148e000 - 0xc14e4000 ( 344 kB)
.data : 0xc132d686 - 0xc148d568 (1407 kB)
.text : 0xc1000000 - 0xc132d686 (3253 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:320
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1995.232 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.46 BogoMIPS (lpj=1995232)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100428
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
Brought up 2 CPUs
Total of 2 processors activated (7980.26 BogoMIPS).
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT bf7db4ce 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
ACPI: SSDT bf7db7d2 004BA (v01 HP Cpu0Cst 00003001 INTL 20060317)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 004BA (v01 HP Cpu0Cst 00003001 INTL 20060317)
ACPI: SSDT bf7db406 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
ACPI: SSDT bf7db74d 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [C298] (on)
ACPI: Power Resource [C1C2] (off)
ACPI: Power Resource [C3B5] (off)
ACPI: Power Resource [C3B6] (off)
ACPI: Power Resource [C3B7] (off)
ACPI: Power Resource [C3B8] (off)
ACPI: Power Resource [C3B9] (off)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xbf800000-0xfedfffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000dffff] (ignored)
pci 0000:00:02.0: reg 10: [mem 0xe4300000-0xe43fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x4000-0x4007]
pci 0000:00:02.1: reg 10: [mem 0xe4400000-0xe44fffff 64bit]
pci 0000:00:1a.0: reg 20: [io 0x4020-0x403f]
pci 0000:00:1a.1: reg 20: [io 0x4040-0x405f]
pci 0000:00:1a.7: reg 10: [mem 0xe4500000-0xe45003ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xe4504000-0xe4507fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x4060-0x407f]
pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f]
pci 0000:00:1d.2: reg 20: [io 0x40a0-0x40bf]
pci 0000:00:1d.7: reg 10: [mem 0xe4508000-0xe45083ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0x40c0-0x40cf]
pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7]
pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7]
pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377]
pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577]
pci 0000:00:1f.2: reg 20: [io 0x4100-0x411f]
pci 0000:00:1f.2: reg 24: [mem 0xe4509000-0xe45097ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:10:00.0: reg 10: [mem 0xe4100000-0xe4100fff]
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 10-10]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:18:00.0: reg 10: [mem 0xe4000000-0xe400ffff 64bit]
pci 0000:18:00.0: PME# supported from D3hot D3cold
pci 0000:18:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 18-18]
pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.4: PCI bridge to [bus 28-28]
pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:04.0: reg 10: [mem 0xe4200000-0xe4200fff]
pci 0000:02:04.0: supports D1 D2
pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe42fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled.
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20100428/pci_link-185)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.23.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 00000000bf7b0000 - 00000000bfffffff
cfg80211: Calling CRDA to update world regulatory domain
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved
system 00:09: [io 0x0500-0x057f] has been reserved
system 00:09: [io 0x0800-0x080f] has been reserved
system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x1000-0x107f] has been reserved
system 00:0a: [io 0x1100-0x113f] has been reserved
system 00:0a: [io 0x1200-0x121f] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed99fff] has been reserved
system 00:0b: [mem 0x000cee00-0x000cffff] has been reserved
system 00:0b: [mem 0x000d2a00-0x000d3fff] has been reserved
system 00:0b: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
pci 0000:00:1e.0: BAR 9: assigned [mem 0xc0000000-0xc3ffffff pref]
pci 0000:00:1c.1: BAR 9: assigned [mem 0xc4000000-0xc41fffff 64bit pref]
pci 0000:00:1c.2: BAR 9: assigned [mem 0xc4200000-0xc43fffff 64bit pref]
pci 0000:00:1c.4: BAR 9: assigned [mem 0xc4400000-0xc45fffff 64bit pref]
pci 0000:00:1c.1: BAR 7: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.2: BAR 7: assigned [io 0x6000-0x6fff]
pci 0000:00:1e.0: BAR 7: assigned [io 0x7000-0x7fff]
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.1: PCI bridge to [bus 10-10]
pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
pci 0000:00:1c.1: bridge window [mem 0xc4000000-0xc41fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 18-18]
pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff]
pci 0000:00:1c.2: bridge window [mem 0xc4200000-0xc43fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 28-28]
pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:1c.4: bridge window [mem 0xc4400000-0xc45fffff 64bit pref]
pci 0000:02:04.0: BAR 9: assigned [mem 0xc0000000-0xc3ffffff pref]
pci 0000:02:04.0: BAR 10: assigned [mem 0xc8000000-0xcbffffff]
pci 0000:02:04.0: BAR 7: assigned [io 0x7000-0x70ff]
pci 0000:02:04.0: BAR 8: assigned [io 0x7400-0x74ff]
pci 0000:02:04.0: CardBus bridge to [bus 03-06]
pci 0000:02:04.0: bridge window [io 0x7000-0x70ff]
pci 0000:02:04.0: bridge window [io 0x7400-0x74ff]
pci 0000:02:04.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
pci 0000:02:04.0: bridge window [mem 0xc8000000-0xcbffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-03]
pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe42fffff]
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:10: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:10: resource 1 [mem 0xe4100000-0xe41fffff]
pci_bus 0000:10: resource 2 [mem 0xc4000000-0xc41fffff 64bit pref]
pci_bus 0000:18: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:18: resource 1 [mem 0xe4000000-0xe40fffff]
pci_bus 0000:18: resource 2 [mem 0xc4200000-0xc43fffff 64bit pref]
pci_bus 0000:28: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff]
pci_bus 0000:28: resource 2 [mem 0xc4400000-0xc45fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe42fffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc3ffffff pref]
pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io 0x7000-0x70ff]
pci_bus 0000:03: resource 1 [io 0x7400-0x74ff]
pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc3ffffff pref]
pci_bus 0000:03: resource 3 [mem 0xc8000000-0xcbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
microcode: CPU0 sig=0x6fa, pf=0x80, revision=0x92
microcode: CPU1 sig=0x6fa, pf=0x80, revision=0x92
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
highmem bounce pool size: 64 pages
msgmni has been set to 1715
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
ACPI: AC Adapter [C236] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [C2C0]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [C153]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [C3BA] (off)
ACPI: Fan [C3BB] (off)
ACPI: Fan [C3BC] (off)
ACPI: Fan [C3BD] (off)
ACPI: Fan [C3BE] (off)
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (65 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ1] (66 C)
thermal LNXTHERM:03: registered as thermal_zone2
ACPI: Thermal Zone [TZ3] (46 C)
thermal LNXTHERM:04: registered as thermal_zone3
ACPI: Thermal Zone [TZ4] (26 C)
thermal LNXTHERM:05: registered as thermal_zone4
ACPI: Thermal Zone [TZ5] (65 C)
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 44 for MSI/MSI-X
[drm] set up 7M of stolen space
ACPI: Battery Slot [C238] (battery present)
ACPI: Battery Slot [C237] (battery absent)
[drm] initialized overlay support
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20100428/exoparg2-418)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C003.C098._DOD] (Node f701f588), AE_AML_PACKAGE_LIMIT
ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20100428/video-1937)
acpi device:00: registered as cooling_device7
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
ACPI: Video Device [C098] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xe4509000 port 0xe4509100 irq 45
ata2: DUMMY
ata3: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
tg3.c:v3.110 (April 9, 2010)
tg3 0000:18:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
tg3 0000:18:00.0: setting latency timer to 64
ata5: port disabled. ignoring.
tg3 0000:18:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:17:a4:e7:c4:fc
tg3 0000:18:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
tg3 0000:18:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
tg3 0000:18:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
iwl3945: Copyright(c) 2003-2010 Intel Corporation
iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:10:00.0: setting latency timer to 64
iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:10:00.0: irq 46 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-3945-rs'
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4500000
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4508000
ata4.00: configured for MWDMA2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:C295,PNP0f13:C296] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata1: EH complete
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NC08 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-3: new high speed USB device using ehci_hcd and address 2
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda1): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 344k freed
usb 2-3.3: new low speed USB device using ehci_hcd and address 3
input: HID 046a:002b as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3:1.0/input/input6
generic-usb 0003:046A:002B.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:002b] on usb-0000:00:1d.7-3.3/input0
input: HID 046a:002b as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3:1.1/input/input7
generic-usb 0003:046A:002B.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:002b] on usb-0000:00:1d.7-3.3/input1
usb 2-3.4: new low speed USB device using ehci_hcd and address 4
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.4/2-3.4:1.0/input/input8
generic-usb 0003:046D:C01D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-3.4/input0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
Adding 2650688k swap on /dev/sda5. Priority:-1 extents:1 across:2650688k
EXT3-fs (sda1): using internal journal
tg3 0000:18:00.0: irq 48 for MSI/MSI-X
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-686 i686 Debian
Current Operating System: Linux tamaki 2.6.35-fs #3 SMP Sun Sep 19 21:38:19 CEST 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-fs root=/dev/sda1 ro quiet
Build Date: 20 September 2010 03:40:46PM
xorg-server 2:1.7.7-7 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.18.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 22 13:25:35 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81ea020
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a02:103c:30c0 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4300000/1048576, 0xd0000000/268435456, I/O @ 0x00004000/8
(--) PCI: (0:0:2:1) 8086:2a03:103c:30c0 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.12.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: AUO Model: 2074 Serial#: 0
(II) intel(0): Year: 2005 Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 71.1 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): AUO
(II) intel(0): B154EW02 V0
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0006af742000000000
(II) intel(0): 010f0103802115780a1cf59758508e27
(II) intel(0): 27505400000001010101010101010101
(II) intel(0): 010101010101c71b00a0502017303020
(II) intel(0): 36004bcf100000180000000f00000000
(II) intel(0): 00000000000000000020000000fe0041
(II) intel(0): 554f0a202020202020202020000000fe
(II) intel(0): 004231353445573032205630200a00ac
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output TV1
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): [XvMC] i965_xvmc driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Video Bus (/dev/input/event3)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event3"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Lid Switch (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event0)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event0"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device HID 046a:002b (/dev/input/event6)
(**) HID 046a:002b: Applying InputClass "evdev keyboard catchall"
(**) HID 046a:002b: always reports core events
(**) HID 046a:002b: Device: "/dev/input/event6"
(II) HID 046a:002b: Found keys
(II) HID 046a:002b: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 046a:002b" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device HID 046a:002b (/dev/input/event7)
(**) HID 046a:002b: Applying InputClass "evdev keyboard catchall"
(**) HID 046a:002b: always reports core events
(**) HID 046a:002b: Device: "/dev/input/event7"
(II) HID 046a:002b: Found 1 mouse buttons
(II) HID 046a:002b: Found scroll wheel(s)
(II) HID 046a:002b: Found relative axes
(II) HID 046a:002b: Found absolute axes
(II) HID 046a:002b: Found keys
(II) HID 046a:002b: Configuring as mouse
(II) HID 046a:002b: Configuring as keyboard
(**) HID 046a:002b: YAxisMapping: buttons 4 and 5
(**) HID 046a:002b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 046a:002b" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(EE) HID 046a:002b: failed to initialize for relative axes.
(II) HID 046a:002b: initialized for absolute axes.
(II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event8)
(**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event8"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
SynPS/2 Synaptics TouchPad no synaptics event device found
(**) Option "Device" "/dev/input/mouse0"
Query no Synaptics: 6003C8
(--) SynPS/2 Synaptics TouchPad: no supported touchpad found
(EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
(II) UnloadModule: "synaptics"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Sleep Button: Close
(II) UnloadModule: "evdev"
(II) HID 046a:002b: Close
(II) UnloadModule: "evdev"
(II) HID 046a:002b: Close
(II) UnloadModule: "evdev"
(II) Logitech USB-PS/2 Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-686 i686 Debian
Current Operating System: Linux tamaki 2.6.35-fs #3 SMP Sun Sep 19 21:38:19 CEST 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-fs root=/dev/sda1 ro quiet
Build Date: 20 September 2010 03:40:46PM
xorg-server 2:1.7.7-7 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.18.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 22 13:29:17 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81ea020
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a02:103c:30c0 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4300000/1048576, 0xd0000000/268435456, I/O @ 0x00004000/8
(--) PCI: (0:0:2:1) 8086:2a03:103c:30c0 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.12.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: AUO Model: 2074 Serial#: 0
(II) intel(0): Year: 2005 Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 71.1 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): AUO
(II) intel(0): B154EW02 V0
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0006af742000000000
(II) intel(0): 010f0103802115780a1cf59758508e27
(II) intel(0): 27505400000001010101010101010101
(II) intel(0): 010101010101c71b00a0502017303020
(II) intel(0): 36004bcf100000180000000f00000000
(II) intel(0): 00000000000000000020000000fe0041
(II) intel(0): 554f0a202020202020202020000000fe
(II) intel(0): 004231353445573032205630200a00ac
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output TV1
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): [XvMC] i965_xvmc driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Video Bus (/dev/input/event3)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event3"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Lid Switch (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event0)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event0"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device HID 046a:002b (/dev/input/event6)
(**) HID 046a:002b: Applying InputClass "evdev keyboard catchall"
(**) HID 046a:002b: always reports core events
(**) HID 046a:002b: Device: "/dev/input/event6"
(II) HID 046a:002b: Found keys
(II) HID 046a:002b: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 046a:002b" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device HID 046a:002b (/dev/input/event7)
(**) HID 046a:002b: Applying InputClass "evdev keyboard catchall"
(**) HID 046a:002b: always reports core events
(**) HID 046a:002b: Device: "/dev/input/event7"
(II) HID 046a:002b: Found 1 mouse buttons
(II) HID 046a:002b: Found scroll wheel(s)
(II) HID 046a:002b: Found relative axes
(II) HID 046a:002b: Found absolute axes
(II) HID 046a:002b: Found keys
(II) HID 046a:002b: Configuring as mouse
(II) HID 046a:002b: Configuring as keyboard
(**) HID 046a:002b: YAxisMapping: buttons 4 and 5
(**) HID 046a:002b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 046a:002b" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(EE) HID 046a:002b: failed to initialize for relative axes.
(II) HID 046a:002b: initialized for absolute axes.
(II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event8)
(**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event8"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
SynPS/2 Synaptics TouchPad no synaptics event device found
(**) Option "Device" "/dev/input/mouse0"
Query no Synaptics: 6003C8
(--) SynPS/2 Synaptics TouchPad: no supported touchpad found
(EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
(II) UnloadModule: "synaptics"
(II) AIGLX: Suspending AIGLX clients for VT switch
Reply to: