--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: [855GM] X crashes shortly after desktop startup
- From: Christian Beier <dontmind@freeshell.org>
- Date: Wed, 07 Apr 2010 20:16:04 +0200
- Message-id: <20100407181604.3032.4276.reportbug@joe.kifferkolonie>
Package: xserver-xorg-video-intel
Version: 2:2.9.1-3
Severity: important
Hi there,
After upgrading to squeeze, X11 crashes a few seconds after startup on my JVC MP-XP731 with a 855GM.
The screen goes blank, no VT switching possible. SSH'ing in still works. I tried with a new user account to rule
out any old-config issues: same result. Funny thing is GDM works okay. I can also start a sole X from commandline and
can even run glxgears, so maybe it's an issue with UXA render accel. I cannot use UMS either: when booting with i915 modeset=0,
the screen just goes blank on X startup, no Xorg log written, no ssh possible. So right now i'm sticking with vesa (which is not
working at all with kms turned on, but that's another issue).
I also tried 2.6.30 kernel image and 2.6.33 from experimental, with different log output, but same overall results.
I can post the logs if neccesary.
Trying out different intel drivers makes no big difference as well. With intel 2.11 from experimental X locks up instead
of crashing and VT switching is still possible, but that's it. Compiling older intel driver releases proved difficult
as they rely on headers that X.org is not providing anymore since 7.1 or so.
Here's the output of startx:
----snip---
xauth: creating new authority file /home/test/.Xauthority
xauth: creating new authority file /home/test/.Xauthority
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux joe 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-686 root=UUID=42eea0ab-800e-4a54-823e-7de67467ca52 ro quiet
Build Date: 23 March 2010 10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 7 19:54:29 2010
(==) Using default built-in configuration (30 lines)
FATAL: Module fbcon not found.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(EE) "Logitech USB Receiver": failed to initialize for relative axes.
../../intel/intel_bufmgr_gem.c:983: Error setting domain 27: Input/output error
../../intel/intel_bufmgr_gem.c:983: Error setting domain 27: Input/output error
../../intel/intel_bufmgr_gem.c:983: Error setting domain 27: Input/output error
Fatal server error:
Failed to submit batchbuffer: Input/output error
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
X: ../../src/i830_batchbuffer.h:79: intel_batch_emit_dword: Assertion `pI830->batch_ptr != ((void *)0)' failed.
xinit: connection to X server lost.
waiting for X server to shut down
---snap---
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Aug 23 2007 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1712764 Mar 23 23:13 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
/etc/X11/xorg.conf does not exist.
Xorg X server log files on system:
-rw-r--r-- 1 root root 28326 Apr 7 19:55 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux joe 2.6.32-3-686 #1 SMP Thu Feb 25 06:14:20 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-686 root=UUID=42eea0ab-800e-4a54-823e-7de67467ca52 ro quiet
Build Date: 23 March 2010 10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 7 19:54:29 2010
(II) Loader magic: 0x81e7be0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:3582:1043:1712 Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/134217728, 0xfeb00000/524288, I/O @ 0x0000dc00/8
(--) PCI: (0:0:2:1) 8086:3582:1043:1712 Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xfea80000/524288
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 0.4.1
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(0): Chipset: "852GM/855GM"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "832x624" (exceeds panel dimensions)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1032 1165 1344 600 603 609 625 (37.5 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1024x600
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(WW) intel(0): Disabling Xv because no adaptors could be initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) config/udev: Adding input device "Power Button" (/dev/input/event3)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event3"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de,us_intl,es,ru"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/udev: Adding input device "Video Bus" (/dev/input/event4)
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event4"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de,us_intl,es,ru"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/udev: Adding input device "Power Button" (/dev/input/event1)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event1"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de,us_intl,es,ru"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/udev: Adding input device "Logitech USB Receiver" (/dev/input/event5)
(**) "Logitech USB Receiver": always reports core events
(**) "Logitech USB Receiver": Device: "/dev/input/event5"
(II) "Logitech USB Receiver": Found 20 mouse buttons
(II) "Logitech USB Receiver": Found scroll wheel(s)
(II) "Logitech USB Receiver": Found relative axes
(II) "Logitech USB Receiver": Found x and y relative axes
(II) "Logitech USB Receiver": Configuring as mouse
(**) "Logitech USB Receiver": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Receiver": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Receiver"" (type: MOUSE)
(**) "Logitech USB Receiver": (accel) keeping acceleration scheme 1
(**) "Logitech USB Receiver": (accel) acceleration profile 0
(II) "Logitech USB Receiver": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB Receiver" (/dev/input/event6)
(**) "Logitech USB Receiver": always reports core events
(**) "Logitech USB Receiver": Device: "/dev/input/event6"
(II) "Logitech USB Receiver": Found 1 mouse buttons
(II) "Logitech USB Receiver": Found scroll wheel(s)
(II) "Logitech USB Receiver": Found relative axes
(II) "Logitech USB Receiver": Found absolute axes
(II) "Logitech USB Receiver": Found keys
(II) "Logitech USB Receiver": Configuring as mouse
(II) "Logitech USB Receiver": Configuring as keyboard
(**) "Logitech USB Receiver": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Receiver": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Receiver"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de,us_intl,es,ru"
(**) Option "xkb_variant" "nodeadkeys"
(EE) "Logitech USB Receiver": failed to initialize for relative axes.
(**) "Logitech USB Receiver": (accel) keeping acceleration scheme 1
(**) "Logitech USB Receiver": (accel) acceleration profile 0
(II) "Logitech USB Receiver": initialized for absolute axes.
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event0)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event0"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de,us_intl,es,ru"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/udev: Adding input device "TPPS/2 IBM TrackPoint" (/dev/input/event9)
(**) "TPPS/2 IBM TrackPoint": always reports core events
(**) "TPPS/2 IBM TrackPoint": Device: "/dev/input/event9"
(II) "TPPS/2 IBM TrackPoint": Found 3 mouse buttons
(II) "TPPS/2 IBM TrackPoint": Found relative axes
(II) "TPPS/2 IBM TrackPoint": Found x and y relative axes
(II) "TPPS/2 IBM TrackPoint": Configuring as mouse
(**) "TPPS/2 IBM TrackPoint": YAxisMapping: buttons 4 and 5
(**) "TPPS/2 IBM TrackPoint": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""TPPS/2 IBM TrackPoint"" (type: MOUSE)
(**) "TPPS/2 IBM TrackPoint": (accel) keeping acceleration scheme 1
(**) "TPPS/2 IBM TrackPoint": (accel) acceleration profile 0
(II) "TPPS/2 IBM TrackPoint": initialized for relative axes.
(II) config/udev: Adding input device "ACPI Virtual Keyboard Device" (/dev/input/event10)
(**) "ACPI Virtual Keyboard Device": always reports core events
(**) "ACPI Virtual Keyboard Device": Device: "/dev/input/event10"
(II) "ACPI Virtual Keyboard Device": Found keys
(II) "ACPI Virtual Keyboard Device": Configuring as keyboard
(II) XINPUT: Adding extended input device ""ACPI Virtual Keyboard Device"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de,us_intl,es,ru"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/udev: Adding input device "Asus Laptop extra buttons" (/dev/input/event8)
(**) "Asus Laptop extra buttons": always reports core events
(**) "Asus Laptop extra buttons": Device: "/dev/input/event8"
(II) "Asus Laptop extra buttons": Found keys
(II) "Asus Laptop extra buttons": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Asus Laptop extra buttons"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de,us_intl,es,ru"
(**) Option "xkb_variant" "nodeadkeys"
(WW) intel(0): i830_uxa_prepare_access: bo map failed
(WW) intel(0): i830_uxa_prepare_access: bo map failed
(WW) intel(0): i830_uxa_prepare_access: bo map failed
Fatal server error:
Failed to submit batchbuffer: Input/output error
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Video Bus": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Logitech USB Receiver": Close
(II) UnloadModule: "evdev"
(II) "Logitech USB Receiver": Close
(II) UnloadModule: "evdev"
(II) "AT Translated Set 2 keyboard": Close
(II) UnloadModule: "evdev"
(II) "TPPS/2 IBM TrackPoint": Close
(II) UnloadModule: "evdev"
(II) "ACPI Virtual Keyboard Device": Close
(II) UnloadModule: "evdev"
(II) "Asus Laptop extra buttons": Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
udev information:
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=de,us_intl,es,ru
E: XKBVARIANT=nodeadkeys
E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: x11_driver=evdev
E: DMI_VENDOR=JVC
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1
N: input/event1
S: char/13:65
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de,us_intl,es,ru
E: XKBVARIANT=nodeadkeys
E: DEVLINKS=/dev/char/13:65
E: x11_driver=evdev
E: DMI_VENDOR=JVC
P: /devices/virtual/input/input10/event10
N: input/event10
S: char/13:74
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=de,us_intl,es,ru
E: XKBVARIANT=nodeadkeys
E: DEVLINKS=/dev/char/13:74
E: x11_driver=evdev
E: DMI_VENDOR=JVC
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=JVC
E: DEVLINKS=/dev/char/13:66
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de,us_intl,es,ru
E: XKBVARIANT=nodeadkeys
E: DEVLINKS=/dev/char/13:67
E: x11_driver=evdev
E: DMI_VENDOR=JVC
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de,us_intl,es,ru
E: XKBVARIANT=nodeadkeys
E: DEVLINKS=/dev/char/13:68
E: x11_driver=evdev
E: DMI_VENDOR=JVC
P: /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input5/event5
N: input/event5
S: char/13:69
S: input/by-id/usb-Logitech_USB_Receiver-event-mouse
S: input/by-path/pci-0000:00:1d.2-usb-0:1:1.0-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c526
E: ID_REVISION=0500
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.2-usb-0:1:1.0
E: x11_driver=evdev
E: DEVLINKS=/dev/char/13:69 /dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse /dev/input/by-path/pci-0000:00:1d.2-usb-0:1:1.0-event-mouse
P: /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input6/event6
N: input/event6
S: char/13:70
S: input/by-id/usb-Logitech_USB_Receiver-event-if01
S: input/by-path/pci-0000:00:1d.2-usb-0:1:1.1-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB_Receiver
E: ID_MODEL_ENC=USB\x20Receiver
E: ID_MODEL_ID=c526
E: ID_REVISION=0500
E: ID_SERIAL=Logitech_USB_Receiver
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.2-usb-0:1:1.1
E: XKBMODEL=pc105
E: XKBLAYOUT=de,us_intl,es,ru
E: XKBVARIANT=nodeadkeys
E: DEVLINKS=/dev/char/13:70 /dev/input/by-id/usb-Logitech_USB_Receiver-event-if01 /dev/input/by-path/pci-0000:00:1d.2-usb-0:1:1.1-event
E: x11_driver=evdev
P: /devices/platform/pcspkr/input/input7/event7
N: input/event7
S: char/13:71
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=JVC
E: DEVLINKS=/dev/char/13:71 /dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/virtual/input/input8/event8
N: input/event8
S: char/13:72
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=de,us_intl,es,ru
E: XKBVARIANT=nodeadkeys
E: DEVLINKS=/dev/char/13:72
E: x11_driver=evdev
E: DMI_VENDOR=JVC
P: /devices/platform/i8042/serio4/input/input9/event9
N: input/event9
S: char/13:73
S: input/by-path/platform-i8042-serio-4-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: x11_driver=evdev
E: DMI_VENDOR=JVC
E: DEVLINKS=/dev/char/13:73 /dev/input/by-path/platform-i8042-serio-4-event-mouse
DRM Information from dmesg:
[ 1.570878] Linux agpgart interface v0.103
[ 1.787242] [drm] Initialized drm 1.1.0 20060810
[ 3.364779] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 3.365255] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 3.367070] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 3.373147] [drm] set up 7M of stolen space
[ 3.849202] [drm] DAC-6: set mode 640x480 0
[ 4.435161] [drm] LVDS-8: set mode 1024x600 d
[ 4.491806] fb0: inteldrmfb frame buffer device
[ 4.491824] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 198.592831] [drm] DAC-6: set mode 640x480 0
[ 199.084801] [drm] DAC-6: set mode 640x480 0
[ 199.613913] [drm] DAC-6: set mode 640x480 0
[ 200.107064] [drm] DAC-6: set mode 640x480 0
[ 210.512416] [drm] DAC-6: set mode 640x480 0
[ 211.006926] [drm] DAC-6: set mode 640x480 0
[ 211.545445] [drm] DAC-6: set mode 640x480 0
[ 212.037779] [drm] DAC-6: set mode 640x480 0
[ 212.941481] [drm] DAC-6: set mode 640x480 0
[ 213.433826] [drm] DAC-6: set mode 640x480 0
[ 255.072044] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 255.072090] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 153 at 152)
[ 255.073744] [drm:i915_gem_execbuffer] *ERROR* Execbuf while wedged
[ 255.698271] [drm] LVDS-8: set mode 1024x600 d
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-3-686 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib
ii libdrm-intel1 2.4.18-3 Userspace interface to intel-speci
ii libdrm2 2.4.18-3 Userspace interface to kernel DRM
ii libpciaccess0 0.11.0-2 Generic PCI access library for X
ii libxext6 2:1.1.1-3 X11 miscellaneous extension librar
ii libxfixes3 1:4.0.4-2 X11 miscellaneous 'fixes' extensio
ii libxv1 2:1.0.5-1 X11 Video extension library
ii libxvmc1 2:1.0.5-1 X11 Video extension library
ii xserver-xorg-core 2:1.7.6-1 Xorg X server - core server
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
--- End Message ---