Bug#592861: xserver-xorg-video-intel: high number of wakeups with kernels >=2.6.35
Package: xserver-xorg-video-intel
Version: 2:2.12.0-1
Severity: normal
Hi.
It appears that "intel" X video driver shows an high number of wakeups when
using kernels with version >=2.6.35.
I think that the problem lies in "intel" driver and not in "i915" module
because the interrupt storm only begins when
starting X. If I start my laptop in runlevel 1, i915 interrupts are ver few (or
zero).
When competely ilde, i915 interrupts settle on 60 interrupts/sec (the same of
vertical refresh frequency of my lcd panel).
This is a dump done using powertop with a 60 secs. interval on an otherwise
idle laptop.
Wakeups-from-idle per second : 984.8 interval: 60.0s
no ACPI power usage estimate available
Top causes for wakeups
38.9% (320.1) [ ] [extra timer interrupt]
18.2% (149.9) [ ] PS/2 keyboard/mouse/touchpad interrupt
13.2% (108.9) [ 3159] plugin-containe
12.9% (106.2) [ 3382] reportbug
8.4% ( 69.4) [ ] [i915] <interrupt>
2.3% ( 19.1) [ 2003] Xorg
1.6% ( 12.8) [ ] [ath] <interrupt>
1.2% ( 10.0) [ 2816] kdesu
1.0% ( 8.2) [ ] [ahci] <interrupt>
0.9% ( 7.5) [ ] icedove-bin
0.4% ( 2.9) [ ] firefox-bin
Here goes a dumpo from lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1
(rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2
(rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5
(rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev
03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
03:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless
Network Adapter (rev 01)
Thank you for your attention. Feel free to contact me if you need more
information.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Jul 13 2009 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1878528 Jul 15 17:31 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 3385 Aug 12 16:17 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Synaptics Touchpad" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "Log" "flush"
# Option "AutoAddDevices" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "record"
#Load "dri2"
#Load "glx"
#Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "Protocol" "psmisc"
Option "Device" "/dev/input/mice"
#Option "Device" "/dev/psaux"
#---aqui-------
Option "TapButton1" "1"
Option "SHMConfig" "True"
Option "HorizEdgeScroll" "true"
Option "FingerLow" "35"
Option "FingerHigh" "40"
Option "FastTaps" "0"
Option "SingleTapTimeout" "180"
#Option "MaxDoubleTapTime" "50"
Option "EmulateTwoFingerMinZ" "50"
Option "MinSpeed" "0.3"
Option "MaxSpeed" "0.5"
Option "AccelFactor" "0.005"
#Option "AccelerationProfile" "-1"
#Option "AccelerationScheme" "none"
Option "AccelerationProfileAveraging" "false"
Option "Softening" "false"
Option "EmulateTwoFingerMinW" "7"
Option "VertTwoFingerScroll" "1"
Option "Clicktime" "100"
#----aqu------
#Driver "mouse"
#Option "CorePointer"
#Option "Protocol" "ImPS/2"
#Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
Option "XvMC" "True"
#Option "FramebufferCompression" "True"
#Option "XvPreferOverlay" "True"
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Option "DDC" "False"
Option "DRI" "False"
Option "NoAccel" "True"
Option "SwapbuffersWait" "false"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1280x800
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1280x800
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1280x800
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Kernel version (/proc/version):
Linux version 2.6.35.1 (root@attila2) (gcc version 4.4.5 20100728 (prerelease) (Debian 4.4.4-8) ) #1 SMP Thu Aug 12 16:08:29 SAST 2010
Xorg X server log files on system:
-rw-r--r-- 1 root root 26194 Jan 29 2010 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 20540 May 22 20:06 /var/log/Xorg.20.log
-rw-r--r-- 1 root root 21614 Aug 10 18:28 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 19442 Aug 13 15:07 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
Current Operating System: Linux attila2 2.6.35.1 #1 SMP Thu Aug 12 16:08:29 SAST 2010 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.35.1 root=UUID=da3f34ed-0123-4910-947c-93dc1916ead6 ro acpi_osi=Linux resume=/dev/sda8 acpi=copy_dsdt fastboot
Build Date: 15 July 2010 03:08:26PM
xorg-server 2:1.7.7-3 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 13 15:06:48 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Synaptics Touchpad"
(**) |-->Input Device "Keyboard0"
(**) Option "Log" "flush"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) Flushing logfile enabled
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(II) Loader magic: 0x7c6000
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a42:1179:ff67 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00004110/8
(--) PCI: (0:0:2:1) 8086:2a43:1179:ff67 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0x93400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.12.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "False"
(**) intel(0): Option "SwapbuffersWait" "false"
(**) intel(0): Option "XvMC" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 using monitor section Monitor0
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: LPL Model: 120 Serial#: 0
(II) intel(0): Year: 2008 Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.594 redY: 0.349 greenX: 0.325 greenY: 0.543
(II) intel(0): blueX: 0.157 blueY: 0.139 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1352 h_blank_end 1416 h_border: 0
(II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(II) intel(0): LGPhilipsLCD
(II) intel(0): Monitor name: LP154WX4-TLC8
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff00320c200100000000
(II) intel(0): 00120103802115780a14659859538b28
(II) intel(0): 23505400000001010101010101010101
(II) intel(0): 010101010101121b0088502010303018
(II) intel(0): 36004bcf100000190000000000000000
(II) intel(0): 00000000000000000000000000fe004c
(II) intel(0): 475068696c6970734c43440a000000fc
(II) intel(0): 004c503135345758342d544c43380048
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output TV1
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait disabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): [XvMC] xvmc_vld driver initialized.
(II) intel(0): direct rendering: Disabled
(WW) intel(0): Option "DDC" is not used
(WW) intel(0): Option "NoAccel" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) Synaptics touchpad driver version 1.2.2
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event6
(**) Option "Device" "/dev/input/event6"
(II) Synaptics Touchpad: x-axis range 1472 - 5472
(II) Synaptics Touchpad: y-axis range 1408 - 4448
(II) Synaptics Touchpad: pressure range 0 - 255
(II) Synaptics Touchpad: finger width range 0 - 0
(II) Synaptics Touchpad: buttons: left right
(**) Option "SHMConfig" "True"
(**) Option "FingerLow" "35"
(**) Option "FingerHigh" "40"
(**) Option "ClickTime" "100"
(**) Option "FastTaps" "0"
(**) Option "EmulateTwoFingerMinZ" "50"
(**) Option "EmulateTwoFingerMinW" "7"
(**) Option "HorizEdgeScroll" "true"
(**) Option "VertTwoFingerScroll" "1"
(**) Option "TapButton1" "1"
(**) Option "SingleTapTimeout" "180"
(**) Option "MinSpeed" "0.3"
(**) Option "MaxSpeed" "0.5"
(**) Option "AccelFactor" "0.005"
(--) Synaptics Touchpad: touchpad found
(**) Option "CorePointer"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD)
(**) Synaptics Touchpad: (accel) keeping acceleration scheme 1
(**) Synaptics Touchpad: (accel) acceleration profile 0
(**) Option "Softening" "false"
(**) Option "AccelerationProfileAveraging" "false"
(**) Synaptics Touchpad: (accel) acceleration factor: 2.000
(**) Synaptics Touchpad: (accel) acceleration threshold: 4
(--) Synaptics Touchpad: touchpad found
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "acpi"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Video Bus (/dev/input/event3)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event3"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "acpi"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "acpi"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Lid Switch (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "acpi"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event6"
(--) SynPS/2 Synaptics TouchPad: no supported touchpad found
(EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
(**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "disabling synaptic second mouse found"
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event7)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event7"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "acpi"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) intel(0): EDID vendor "LPL", prod id 288
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1328 1352 1416 800 803 809 816 -hsync -vsync (48.9 kHz)
(--) Synaptics Touchpad: touchpad found
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) ACPI Virtual Keyboard Device: Device reopened after 1 attempts.
udev information:
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2
E: SUBSYSTEM=input
E: DEVNAME=input/event2
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=acpi
E: XKBLAYOUT=es
E: MAJOR=13
E: MINOR=66
E: DEVLINKS=/dev/char/13:66
E: XKBOPTIONS=lv3:ralt_switch,terminate:ctrl_alt_bksp
E: DMI_VENDOR=TOSHIBA
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3
E: SUBSYSTEM=input
E: DEVNAME=input/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=acpi
E: XKBLAYOUT=es
E: MAJOR=13
E: MINOR=67
E: DEVLINKS=/dev/char/13:67
E: XKBOPTIONS=lv3:ralt_switch,terminate:ctrl_alt_bksp
E: DMI_VENDOR=TOSHIBA
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0
N: input/event0
S: char/13:64
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0
E: SUBSYSTEM=input
E: DEVNAME=input/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=acpi
E: XKBLAYOUT=es
E: MAJOR=13
E: MINOR=64
E: DEVLINKS=/dev/char/13:64
E: XKBOPTIONS=lv3:ralt_switch,terminate:ctrl_alt_bksp
E: DMI_VENDOR=TOSHIBA
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1
N: input/event1
S: char/13:65
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1
E: SUBSYSTEM=input
E: DEVNAME=input/event1
E: ID_INPUT=1
E: DMI_VENDOR=TOSHIBA
E: MAJOR=13
E: MINOR=65
E: DEVLINKS=/dev/char/13:65
P: /devices/pci0000:00/0000:00:1b.0/input/input5/event5
N: input/event5
S: char/13:69
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input5/event5
E: SUBSYSTEM=input
E: DEVNAME=input/event5
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=TOSHIBA
E: MAJOR=13
E: MINOR=69
E: DEVLINKS=/dev/char/13:69
P: /devices/platform/i8042/serio0/input/input4/event4
N: input/event4
S: char/13:68
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input4/event4
E: SUBSYSTEM=input
E: DEVNAME=input/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=acpi
E: XKBLAYOUT=es
E: MAJOR=13
E: MINOR=68
E: DEVLINKS=/dev/char/13:68 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=lv3:ralt_switch,terminate:ctrl_alt_bksp
E: DMI_VENDOR=TOSHIBA
P: /devices/platform/i8042/serio1/input/input6/event6
N: input/event6
S: char/13:70
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event6
E: SUBSYSTEM=input
E: DEVNAME=input/event6
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: DMI_VENDOR=TOSHIBA
E: MAJOR=13
E: MINOR=70
E: DEVLINKS=/dev/char/13:70 /dev/input/by-path/platform-i8042-serio-1-event-mouse
P: /devices/platform/i8042/serio1/input/input6/mouse0
N: input/mouse0
S: char/13:32
S: input/by-path/platform-i8042-serio-1-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/mouse0
E: SUBSYSTEM=input
E: DEVNAME=input/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: MAJOR=13
E: MINOR=32
E: DEVLINKS=/dev/char/13:32 /dev/input/by-path/platform-i8042-serio-1-mouse
P: /devices/virtual/input/input7/event7
N: input/event7
S: char/13:71
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input7/event7
E: SUBSYSTEM=input
E: DEVNAME=input/event7
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=acpi
E: XKBLAYOUT=es
E: MAJOR=13
E: MINOR=71
E: DEVLINKS=/dev/char/13:71
E: XKBOPTIONS=lv3:ralt_switch,terminate:ctrl_alt_bksp
E: DMI_VENDOR=TOSHIBA
DRM Information from dmesg:
No AGP bridge found
No AGP bridge found
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected 131068K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[drm] Initialized drm 1.1.0 20060810
[drm] set up 127M of stolen space
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.35.1 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib
ii libdrm-intel1 2.4.21-1 Userspace interface to intel-speci
ii libdrm2 2.4.21-1 Userspace interface to kernel DRM
ii libpciaccess0 0.12.0-1 Generic PCI access library for X
ii libx11-6 2:1.3.3-3 X11 client-side library
ii libx11-xcb1 2:1.3.3-3 Xlib/XCB interface library
ii libxcb-aux0 0.3.6-1 utility libraries for X C Binding
ii libxcb-dri2-0 1.6-1 X C Binding, dri2 extension
ii libxcb1 1.6-1 X C Binding
ii libxext6 2:1.1.2-1 X11 miscellaneous extension librar
ii libxfixes3 1:4.0.5-1 X11 miscellaneous 'fixes' extensio
ii libxv1 2:1.0.5-1 X11 Video extension library
ii libxvmc1 2:1.0.5-1 X11 Video extension library
ii xserver-xorg-core [xorg-video 2:1.7.7-3 Xorg X server - core server
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
Reply to: