Bug#551387: Bug#xxxxx: Please check whether your bug exists with 2.12.0-1+ickle2
> Can you attach the corresponding dmesg and Xorg log?
I've added the same comments to the upstream bug and also note that
hibernate/resume is working.
files requested attached.
Regards,
M
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
Current Operating System: Linux griffin 2.6.34-1-amd64 #1 SMP Wed May 19 19:06:22 UTC 2010 x86_64
Kernel command line: root=/dev/sda1 ro quiet acpi_apic_instance=2 i915.modeset=0
Build Date: 15 July 2010 03:08:26PM
xorg-server 2:1.7.7-3 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 18 18:50:44 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c6000
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a02:104d:9008 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfc000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a03:104d:9008 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfc100000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.12.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) intel(0): Legacy UMS driver enabled.
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(EE) open /dev/fb0: No such file or directory
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFC000000 size 1048576
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID for output LVDS
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): Resizable framebuffer: no
(II) intel(0): EDID for output VGA
(II) intel(0): EDID for output LVDS
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.0 70.59 1280 1344 1408 1453 800 804 806 810 (48.6 kHz)
(II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00400246 to 0x80400246
(WW) intel(0): PIPEBSTAT before: status: LBLC_EVENT_ENABLE VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN LBLC_EVENT_ENABLE VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 971264 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 3885052 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfc000000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd082a000, handle = 0xd082a000
(II) intel(0): [drm] mapped back buffer at 0xd47fd000, handle = 0xd47fd000
(II) intel(0): [drm] mapped depth buffer at 0xd544b000, handle = 0xd544b000
(II) intel(0): [drm] mapped classic textures at 0xd6099000, handle = 0xd6099000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 38707200 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0082a000 (pgoffset 2090)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02312000 (pgoffset 8978)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x047fc000 (pgoffset 18428)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x047fd000 (pgoffset 18429)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x0544b000 (pgoffset 21579)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x06099000 (pgoffset 24729)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0082a000-0x02311fff: front buffer (27552 kB) X tiled
(II) intel(0): 0x02312000-0x047fbfff: exa offscreen (37800 kB)
(II) intel(0): 0x047fc000-0x047fcfff: power context (4 kB)
(II) intel(0): 0x047fd000-0x0544afff: back buffer (12600 kB) X tiled
(II) intel(0): 0x0544b000-0x06098fff: depth buffer (12600 kB) Y tiled
(II) intel(0): 0x06099000-0x08098fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): [drm] dma control initialized, using IRQ 30
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(EE) AIGLX error: i965 does not export required DRI extension
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/udev: Adding input device Video Bus (/dev/input/event3)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event3"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event4)
(**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
(**) Sony Vaio Keys: always reports core events
(**) Sony Vaio Keys: Device: "/dev/input/event4"
(II) Sony Vaio Keys: Found keys
(II) Sony Vaio Keys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Lid Switch (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel Mic at Ext Left Jack (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Intel HP Out at Ext Left Jack (/dev/input/event9)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device PS/2 Mouse (/dev/input/event6)
(**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event6"
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Found relative axes
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Configuring as mouse
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) PS/2 Mouse: initialized for relative axes.
(II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event7)
(**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
(**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event7"
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
(II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
(II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 0
(**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
(**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
(--) AlpsPS/2 ALPS GlidePoint: touchpad found
(II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
(**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
AlpsPS/2 ALPS GlidePoint no synaptics event device found
(**) Option "Device" "/dev/input/mouse2"
Query no Synaptics: 6003C8
(--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
(EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "AlpsPS/2 ALPS GlidePoint"
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event10)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event10"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.34-1-amd64 (Debian 2.6.34-1~experimental.1) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-10) ) #1 SMP Wed May 19 19:06:22 UTC 2010
[ 0.000000] Command line: root=/dev/sda1 ro quiet acpi_apic_instance=2 i915.modeset=0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable)
[ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6cb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6cb000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] ACPI: Shall use APIC/MADT table 2
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000f7700] f7700
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6b0000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf6b0000 page 4k
[ 0.000000] kernel direct mapping tables up to bf6b0000 @ 16000-1b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 19000-1f000
[ 0.000000] RAMDISK: 376c1000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f76d0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000bf6bed81 00094 (v01 Sony VAIO 20080404 PTL 00000000)
[ 0.000000] ACPI: FACP 00000000bf6c7bd2 000F4 (v03 Sony VAIO 20080404 PTL 00000001)
[ 0.000000] ACPI: DSDT 00000000bf6c03df 0777F (v02 Sony VAIO 20080404 PTL 20050624)
[ 0.000000] ACPI: FACS 00000000bf6cafc0 00040
[ 0.000000] ACPI: APIC 00000000bf6c7cc6 00068 (v01 Sony VAIO 20080404 PTL 0000005A)
[ 0.000000] ACPI: HPET 00000000bf6c7d2e 00038 (v01 Sony VAIO 20080404 PTL 0000005A)
[ 0.000000] ACPI: MCFG 00000000bf6c7d66 0003C (v01 Sony VAIO 20080404 PTL 0000005A)
[ 0.000000] ACPI: TCPA 00000000bf6c7da2 00032 (v01 Sony VAIO 20080404 PTL 00005A52)
[ 0.000000] ACPI: TMOR 00000000bf6c7dd4 00026 (v01 Sony VAIO 20080404 PTL 00000003)
[ 0.000000] ACPI: SLIC 00000000bf6c7dfa 00176 (v01 Sony VAIO 20080404 PTL 01000000)
[ 0.000000] ACPI: APIC 00000000bf6c7f70 00068 (v01 Sony VAIO 20080404 PTL 00000000)
[ 0.000000] ACPI: BOOT 00000000bf6c7fd8 00028 (v01 Sony VAIO 20080404 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bf6c0102 002DD (v01 Sony VAIO 20080404 PTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bf6bffe0 00122 (v01 Sony VAIO 20080404 PTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bf6bf3a1 0025F (v01 Sony VAIO 20080404 PTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bf6bf2fb 000A6 (v01 Sony VAIO 20080404 PTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bf6bee15 004E6 (v01 Sony VAIO 20080404 PTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 2
[ 0.000000] ACPI: If "acpi_apic_instance=0" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] bootmap [0000000100005000 - 000000010002cfff] pages 28
[ 0.000000] (14/32 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0001000000 - 000189ada4] TEXT DATA BSS ==> [0001000000 - 000189ada4]
[ 0.000000] #1 [00376c1000 - 0037ff0000] RAMDISK ==> [00376c1000 - 0037ff0000]
[ 0.000000] #2 [000189b000 - 000189b2a4] BRK ==> [000189b000 - 000189b2a4]
[ 0.000000] #3 [00000f7710 - 0000100000] BIOS reserved ==> [00000f7710 - 0000100000]
[ 0.000000] #4 [00000f7700 - 00000f7710] MP-table mpf ==> [00000f7700 - 00000f7710]
[ 0.000000] #5 [000009f800 - 000009fd71] BIOS reserved ==> [000009f800 - 000009fd71]
[ 0.000000] #6 [000009ff05 - 00000f7700] BIOS reserved ==> [000009ff05 - 00000f7700]
[ 0.000000] #7 [000009fd71 - 000009ff05] MP-table mpc ==> [000009fd71 - 000009ff05]
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
[ 0.000000] #9 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
[ 0.000000] #10 [0000016000 - 0000019000] PGTABLE ==> [0000016000 - 0000019000]
[ 0.000000] #11 [0000019000 - 000001a000] PGTABLE ==> [0000019000 - 000001a000]
[ 0.000000] #12 [0100000000 - 0100005000] NODE_DATA ==> [0100000000 - 0100005000]
[ 0.000000] #13 [0100005000 - 010002d000] BOOTMAP ==> [0100005000 - 010002d000]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880100600000-ffff880103dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf6b0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1046079
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 105 pages reserved
[ 0.000000] DMA zone: 3822 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765672 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf6b0000 - 00000000bf6cb000
[ 0.000000] PM: Registered nosave memory: 00000000bf6cb000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001a00000 s89192 r8192 d21400 u1048576
[ 0.000000] pcpu-alloc: s89192 r8192 d21400 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028054
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet acpi_apic_instance=2 i915.modeset=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4042148k/5242880k available (3068k kernel code, 1058564k absent, 142168k reserved, 3757k data, 588k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2194.723 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.44 BogoMIPS (lpj=8778892)
[ 0.004024] Security Framework initialized
[ 0.004030] SELinux: Disabled at boot.
[ 0.004350] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008969] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010128] Mount-cache hash table entries: 256
[ 0.010282] Initializing cgroup subsys ns
[ 0.010286] Initializing cgroup subsys cpuacct
[ 0.010290] Initializing cgroup subsys devices
[ 0.010292] Initializing cgroup subsys freezer
[ 0.010293] Initializing cgroup subsys net_cls
[ 0.010323] CPU: Physical Processor ID: 0
[ 0.010324] CPU: Processor Core ID: 0
[ 0.010327] mce: CPU supports 6 MCE banks
[ 0.010334] CPU0: Thermal monitoring enabled (TM2)
[ 0.010339] using mwait in idle threads.
[ 0.010341] Performance Events: Core2 events, Intel PMU driver.
[ 0.010347] ... version: 2
[ 0.010348] ... bit width: 40
[ 0.010349] ... generic registers: 2
[ 0.010351] ... value mask: 000000ffffffffff
[ 0.010352] ... max period: 000000007fffffff
[ 0.010353] ... fixed-purpose events: 3
[ 0.010355] ... event mask: 0000000700000003
[ 0.011197] ACPI: Core revision 20100121
[ 0.024066] Setting APIC routing to flat
[ 0.024427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.066068] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
[ 0.068000] Booting Node 0, Processors #1 Ok.
[ 0.156013] Brought up 2 CPUs
[ 0.156016] Total of 2 processors activated (8778.41 BogoMIPS).
[ 0.156747] devtmpfs: initialized
[ 0.160053] regulator: core version 0.5
[ 0.160089] NET: Registered protocol family 16
[ 0.160172] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.160175] ACPI: bus type pci registered
[ 0.160246] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.160249] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.182168] PCI: Using configuration type 1 for base access
[ 0.182523] bio: create slab <bio-0> at 0
[ 0.182523] ACPI: EC: Look up EC in DSDT
[ 0.186619] ACPI: BIOS _OSI(Linux) query ignored
[ 0.188775] ACPI: SSDT 00000000bf6bfc9e 0027A (v01 Sony VAIO 20080404 PTL 20050624)
[ 0.189337] ACPI: SSDT 00000000bf6bf600 00619 (v01 Sony VAIO 20080404 PTL 20050624)
[ 0.189988] ACPI: SSDT 00000000bf6bff18 000C8 (v01 Sony VAIO 20080404 PTL 20050624)
[ 0.190396] ACPI: SSDT 00000000bf6bfc19 00085 (v01 Sony VAIO 20080404 PTL 20050624)
[ 0.190797] ACPI: Interpreter enabled
[ 0.190801] ACPI: (supports S0 S3 S4 S5)
[ 0.190819] ACPI: Using IOAPIC for interrupt routing
[ 0.207682] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.213776] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.213780] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.214454] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.216644] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.216646] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.216649] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.216652] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.216654] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.216657] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.216659] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.216662] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.216665] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.216667] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.216725] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfc0fffff 64bit]
[ 0.216732] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.216737] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.216773] pci 0000:00:02.1: reg 10: [mem 0xfc100000-0xfc1fffff 64bit]
[ 0.216889] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
[ 0.216960] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
[ 0.217030] pci 0000:00:1a.7: reg 10: [mem 0xfc504800-0xfc504bff]
[ 0.217101] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.217106] pci 0000:00:1a.7: PME# disabled
[ 0.217155] pci 0000:00:1b.0: reg 10: [mem 0xfc500000-0xfc503fff 64bit]
[ 0.217223] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.217228] pci 0000:00:1b.0: PME# disabled
[ 0.217336] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.217341] pci 0000:00:1c.0: PME# disabled
[ 0.217452] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.217457] pci 0000:00:1c.1: PME# disabled
[ 0.217568] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.217573] pci 0000:00:1c.2: PME# disabled
[ 0.217686] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.217691] pci 0000:00:1c.3: PME# disabled
[ 0.217763] pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f]
[ 0.217835] pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f]
[ 0.217906] pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf]
[ 0.217975] pci 0000:00:1d.7: reg 10: [mem 0xfc504c00-0xfc504fff]
[ 0.218045] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.218050] pci 0000:00:1d.7: PME# disabled
[ 0.218217] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.218222] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.218227] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1670 (mask 000f)
[ 0.218282] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.218291] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.218299] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.218307] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.218315] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
[ 0.218386] pci 0000:00:1f.2: reg 10: [io 0x1c00-0x1c07]
[ 0.218394] pci 0000:00:1f.2: reg 14: [io 0x18d4-0x18d7]
[ 0.218402] pci 0000:00:1f.2: reg 18: [io 0x18d8-0x18df]
[ 0.218410] pci 0000:00:1f.2: reg 1c: [io 0x18d0-0x18d3]
[ 0.218418] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.218426] pci 0000:00:1f.2: reg 24: [mem 0xfc504000-0xfc5047ff]
[ 0.218473] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.218478] pci 0000:00:1f.2: PME# disabled
[ 0.218512] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.218540] pci 0000:00:1f.3: reg 20: [io 0x1c20-0x1c3f]
[ 0.218637] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[ 0.218642] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.218647] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.218655] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.218786] pci 0000:06:00.0: reg 10: [mem 0xf8000000-0xf8001fff 64bit]
[ 0.218906] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.218914] pci 0000:06:00.0: PME# disabled
[ 0.218951] pci 0000:00:1c.1: PCI bridge to [bus 06-06]
[ 0.218957] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.218962] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.218970] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.219356] pci 0000:07:00.0: reg 10: [mem 0xfa000000-0xfa003fff 64bit]
[ 0.219410] pci 0000:07:00.0: reg 18: [io 0x4000-0x40ff]
[ 0.219615] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.219941] pci 0000:07:00.0: supports D1 D2
[ 0.219942] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.219968] pci 0000:07:00.0: PME# disabled
[ 0.220072] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[ 0.220077] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.220082] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.220091] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.220158] pci 0000:00:1c.3: PCI bridge to [bus 08-08]
[ 0.220163] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.220168] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff]
[ 0.220176] pci 0000:00:1c.3: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.220257] pci 0000:09:04.0: reg 10: [mem 0xfc204000-0xfc204fff]
[ 0.220288] pci 0000:09:04.0: supports D1 D2
[ 0.220290] pci 0000:09:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220295] pci 0000:09:04.0: PME# disabled
[ 0.220343] pci 0000:09:04.1: reg 10: [mem 0xfc206000-0xfc2067ff]
[ 0.220353] pci 0000:09:04.1: reg 14: [mem 0xfc200000-0xfc203fff]
[ 0.220423] pci 0000:09:04.1: supports D1 D2
[ 0.220425] pci 0000:09:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220430] pci 0000:09:04.1: PME# disabled
[ 0.220475] pci 0000:09:04.2: reg 10: [mem 0xfc205000-0xfc205fff]
[ 0.220551] pci 0000:09:04.2: supports D1 D2
[ 0.220553] pci 0000:09:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.220559] pci 0000:09:04.2: PME# disabled
[ 0.220635] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] (subtractive decode)
[ 0.220641] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.220646] pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.220654] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.220657] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.220659] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.220662] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.220664] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.220666] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.220669] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.220671] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.220674] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.220676] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.220679] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.220737] pci_bus 0000:0a: [bus 0a-0d] partially hidden behind transparent bridge 0000:09 [bus 09-0a]
[ 0.220781] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.221028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.221145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.221222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.221297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.221406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.230360] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.230463] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.230562] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.230661] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.230760] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.230862] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.230961] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.231060] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.231148] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.231164] vgaarb: loaded
[ 0.231190] PCI: Using ACPI for IRQ routing
[ 0.231190] PCI: pci_cache_line_size set to 64 bytes
[ 0.231190] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.231190] reserve RAM buffer: 00000000bf6b0000 - 00000000bfffffff
[ 0.231190] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.231190] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.231190] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.236018] Switching to clocksource tsc
[ 0.237228] pnp: PnP ACPI init
[ 0.237238] ACPI: bus type pnp registered
[ 0.242457] pnp 00:09: IRQ 9 override to level, high
[ 0.246143] pnp: PnP ACPI: found 12 devices
[ 0.246145] ACPI: ACPI bus type pnp unregistered
[ 0.246153] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.246155] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.246158] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.246161] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.246166] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.246169] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.246171] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.246178] system 00:07: [io 0x0680-0x069f] has been reserved
[ 0.246181] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.246183] system 00:07: [io 0x1000-0x107f] has been reserved
[ 0.246186] system 00:07: [io 0x1180-0x11bf] has been reserved
[ 0.246188] system 00:07: [io 0x1640-0x164f] has been reserved
[ 0.246191] system 00:07: [io 0xfe00] has been reserved
[ 0.250933] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
[ 0.250937] pci 0000:00:1e.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.250940] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc4000000-0xc40000ff]
[ 0.250946] pci 0000:00:1f.3: BAR 0: set to [mem 0xc4000000-0xc40000ff] (PCI address [0xc4000000-0xc40000ff]
[ 0.250949] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[ 0.250952] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.250959] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.250964] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.250973] pci 0000:00:1c.1: PCI bridge to [bus 06-06]
[ 0.250976] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.250983] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.250988] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.250997] pci 0000:07:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[ 0.250999] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[ 0.251003] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.251010] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.251015] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.251023] pci 0000:00:1c.3: PCI bridge to [bus 08-08]
[ 0.251027] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.251033] pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff]
[ 0.251038] pci 0000:00:1c.3: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.251048] pci 0000:09:04.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
[ 0.251053] pci 0000:09:04.0: BAR 16: can't assign mem (size 0x4000000)
[ 0.251055] pci 0000:09:04.0: BAR 13: assigned [io 0x6000-0x60ff]
[ 0.251058] pci 0000:09:04.0: BAR 14: assigned [io 0x6400-0x64ff]
[ 0.251060] pci 0000:09:04.0: CardBus bridge to [bus 0a-0d]
[ 0.251062] pci 0000:09:04.0: bridge window [io 0x6000-0x60ff]
[ 0.251067] pci 0000:09:04.0: bridge window [io 0x6400-0x64ff]
[ 0.251073] pci 0000:09:04.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
[ 0.251079] pci 0000:00:1e.0: PCI bridge to [bus 09-0a]
[ 0.251083] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff]
[ 0.251089] pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.251094] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
[ 0.251112] alloc irq_desc for 16 on node -1
[ 0.251114] alloc kstat_irqs on node -1
[ 0.251120] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.251125] pci 0000:00:1c.0: setting latency timer to 64
[ 0.251136] alloc irq_desc for 17 on node -1
[ 0.251137] alloc kstat_irqs on node -1
[ 0.251141] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.251146] pci 0000:00:1c.1: setting latency timer to 64
[ 0.251157] alloc irq_desc for 18 on node -1
[ 0.251158] alloc kstat_irqs on node -1
[ 0.251161] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.251166] pci 0000:00:1c.2: setting latency timer to 64
[ 0.251177] alloc irq_desc for 19 on node -1
[ 0.251178] alloc kstat_irqs on node -1
[ 0.251182] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.251187] pci 0000:00:1c.3: setting latency timer to 64
[ 0.251195] pci 0000:00:1e.0: setting latency timer to 64
[ 0.251208] alloc irq_desc for 20 on node -1
[ 0.251209] alloc kstat_irqs on node -1
[ 0.251212] pci 0000:09:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.251219] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.251221] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.251223] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.251225] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.251227] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.251229] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.251231] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.251233] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xdfffffff]
[ 0.251235] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfebfffff]
[ 0.251237] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff]
[ 0.251239] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.251241] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.251243] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.251246] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.251247] pci_bus 0000:06: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.251250] pci_bus 0000:06: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.251252] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
[ 0.251254] pci_bus 0000:07: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.251256] pci_bus 0000:07: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
[ 0.251258] pci_bus 0000:08: resource 0 [io 0x5000-0x5fff]
[ 0.251260] pci_bus 0000:08: resource 1 [mem 0xc8000000-0xc9ffffff]
[ 0.251262] pci_bus 0000:08: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.251264] pci_bus 0000:09: resource 0 [io 0x6000-0x6fff]
[ 0.251266] pci_bus 0000:09: resource 1 [mem 0xfc200000-0xfc2fffff]
[ 0.251268] pci_bus 0000:09: resource 2 [mem 0xc0000000-0xc3ffffff pref]
[ 0.251270] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.251272] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.251274] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.251276] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.251278] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.251280] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.251282] pci_bus 0000:09: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.251284] pci_bus 0000:09: resource 11 [mem 0xc0000000-0xdfffffff]
[ 0.251286] pci_bus 0000:09: resource 12 [mem 0xf0000000-0xfebfffff]
[ 0.251288] pci_bus 0000:09: resource 13 [mem 0xfed40000-0xfed44fff]
[ 0.251290] pci_bus 0000:0a: resource 0 [io 0x6000-0x60ff]
[ 0.251292] pci_bus 0000:0a: resource 1 [io 0x6400-0x64ff]
[ 0.251294] pci_bus 0000:0a: resource 2 [mem 0xc0000000-0xc3ffffff pref]
[ 0.251314] NET: Registered protocol family 2
[ 0.251448] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.252588] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.256706] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.257287] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.257290] TCP reno registered
[ 0.257302] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.257347] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.257494] NET: Registered protocol family 1
[ 0.257514] pci 0000:00:02.0: Boot video device
[ 0.257734] PCI: CLS 64 bytes, default 64
[ 0.257796] Unpacking initramfs...
[ 0.475909] Freeing initrd memory: 9404k freed
[ 0.480709] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.480714] Placing 64MB software IO TLB between ffff880001b1d000 - ffff880005b1d000
[ 0.480716] software IO TLB at phys 0x1b1d000 - 0x5b1d000
[ 0.480812] Simple Boot Flag at 0x36 set to 0x1
[ 0.481129] audit: initializing netlink socket (disabled)
[ 0.481142] type=2000 audit(1279479025.479:1): initialized
[ 0.481533] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.482836] VFS: Disk quotas dquot_6.5.2
[ 0.482877] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.482955] msgmni has been set to 7913
[ 0.483132] alg: No test for stdrng (krng)
[ 0.483177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.483180] io scheduler noop registered
[ 0.483181] io scheduler deadline registered
[ 0.483234] io scheduler cfq registered (default)
[ 0.483327] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.483380] alloc irq_desc for 24 on node -1
[ 0.483382] alloc kstat_irqs on node -1
[ 0.483397] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.483502] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.483552] alloc irq_desc for 25 on node -1
[ 0.483554] alloc kstat_irqs on node -1
[ 0.483563] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.483667] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.483717] alloc irq_desc for 26 on node -1
[ 0.483719] alloc kstat_irqs on node -1
[ 0.483728] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.483826] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.483886] alloc irq_desc for 27 on node -1
[ 0.483888] alloc kstat_irqs on node -1
[ 0.483897] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.484006] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
[ 0.484014] Firmware did not grant requested _OSC control
[ 0.484016] pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
[ 0.484020] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
[ 0.484023] pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
[ 0.484025] Firmware did not grant requested _OSC control
[ 0.484027] pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: no _OSC support
[ 0.484030] pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
[ 0.484034] pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS
[ 0.484036] Firmware did not grant requested _OSC control
[ 0.484038] pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: no _OSC support
[ 0.484041] pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13
[ 0.484044] pcieport 0000:00:1c.3: Requesting control of PCIe PME from ACPI BIOS
[ 0.484046] Firmware did not grant requested _OSC control
[ 0.484048] pcieport 0000:00:1c.3: Failed to receive control of PCIe PME service: no _OSC support
[ 0.484051] pcie_pme: probe of 0000:00:1c.3:pcie01 failed with error -13
[ 0.485449] Linux agpgart interface v0.103
[ 0.485478] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.486760] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 0.491575] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.491627] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.492003] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.494274] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.494282] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.494335] mice: PS/2 mouse device common for all mice
[ 0.494374] rtc_cmos 00:08: RTC can wake from S4
[ 0.494411] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.494443] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.494452] cpuidle: using governor ladder
[ 0.494454] cpuidle: using governor menu
[ 0.494458] No iBFT detected.
[ 0.494673] TCP cubic registered
[ 0.494777] NET: Registered protocol family 10
[ 0.495066] lo: Disabled Privacy Extensions
[ 0.495247] Mobile IPv6
[ 0.495250] NET: Registered protocol family 17
[ 0.495326] PM: Resume from disk failed.
[ 0.495331] registered taskstats version 1
[ 0.495862] rtc_cmos 00:08: setting system clock to 2010-07-18 18:50:25 UTC (1279479025)
[ 0.495895] Initalizing network drop monitor service
[ 0.495933] Freeing unused kernel memory: 588k freed
[ 0.496090] Write protecting the kernel read-only data: 6144k
[ 0.496220] Freeing unused kernel memory: 1008k freed
[ 0.496577] Freeing unused kernel memory: 868k freed
[ 0.521984] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.602040] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.602047] ACPI: Thermal Zone [ATF0] (49 C)
[ 0.602752] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.602758] ACPI: Thermal Zone [DTS0] (51 C)
[ 0.603477] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.603484] ACPI: Thermal Zone [DTS1] (55 C)
[ 0.714021] usbcore: registered new interface driver usbfs
[ 0.714102] usbcore: registered new interface driver hub
[ 0.714220] sky2: driver version 1.27
[ 0.714262] sky2 0000:07:00.0: power state changed by ACPI to D0
[ 0.714290] sky2 0000:07:00.0: power state changed by ACPI to D0
[ 0.714318] sky2 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.714371] sky2 0000:07:00.0: setting latency timer to 64
[ 0.714469] sky2 0000:07:00.0: Yukon-2 EC Ultra chip revision 3
[ 0.715076] alloc irq_desc for 28 on node -1
[ 0.715078] alloc kstat_irqs on node -1
[ 0.715154] sky2 0000:07:00.0: irq 28 for MSI/MSI-X
[ 0.715206] usbcore: registered new device driver usb
[ 0.718805] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.718829] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 0.718850] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.718854] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.718873] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.718910] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.722467] sky2 0000:07:00.0: eth0: addr 00:13:a9:fe:3e:45
[ 0.722793] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.723157] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504800
[ 0.734128] SCSI subsystem initialized
[ 0.745782] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.745817] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.745819] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.745821] usb usb1: Product: EHCI Host Controller
[ 0.745823] usb usb1: Manufacturer: Linux 2.6.34-1-amd64 ehci_hcd
[ 0.745825] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.745924] hub 1-0:1.0: USB hub found
[ 0.745929] hub 1-0:1.0: 4 ports detected
[ 0.746010] alloc irq_desc for 23 on node -1
[ 0.746012] alloc kstat_irqs on node -1
[ 0.746019] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.746045] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.746049] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.746060] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.746089] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.746843] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.746854] ACPI: Power Button [PWRB]
[ 0.746898] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.748653] ACPI: Lid Switch [LID0]
[ 0.749094] libata version 3.00 loaded.
[ 0.749985] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.750003] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
[ 0.759787] alloc irq_desc for 21 on node -1
[ 0.759790] alloc kstat_irqs on node -1
[ 0.759798] firewire_ohci 0000:09:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.771811] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.771849] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.771852] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.771854] usb usb2: Product: EHCI Host Controller
[ 0.771856] usb usb2: Manufacturer: Linux 2.6.34-1-amd64 ehci_hcd
[ 0.771857] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.771959] hub 2-0:1.0: USB hub found
[ 0.771964] hub 2-0:1.0: 6 ports detected
[ 0.772675] [drm] Initialized drm 1.1.0 20060810
[ 0.775815] ata_piix 0000:00:1f.1: version 2.13
[ 0.775831] alloc irq_desc for 22 on node -1
[ 0.775833] alloc kstat_irqs on node -1
[ 0.775840] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.775881] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.776074] scsi0 : ata_piix
[ 0.776148] scsi1 : ata_piix
[ 0.776783] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.776785] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.776816] ahci 0000:00:1f.2: version 3.0
[ 0.776829] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.776880] alloc irq_desc for 29 on node -1
[ 0.776882] alloc kstat_irqs on node -1
[ 0.776893] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 0.776956] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.776960] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.776965] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.777236] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.777248] scsi2 : ahci
[ 0.777491] scsi3 : ahci
[ 0.777666] scsi4 : ahci
[ 0.777798] ata3: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 29
[ 0.777802] ata4: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 29
[ 0.777806] ata5: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504200 irq 29
[ 0.777830] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.777863] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.777867] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.777880] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.777912] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
[ 0.777958] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.777960] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.777962] usb usb3: Product: UHCI Host Controller
[ 0.777964] usb usb3: Manufacturer: Linux 2.6.34-1-amd64 uhci_hcd
[ 0.777965] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.778057] hub 3-0:1.0: USB hub found
[ 0.778061] hub 3-0:1.0: 2 ports detected
[ 0.778129] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.778136] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.778140] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.778147] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.778179] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840
[ 0.778216] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.778218] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.778220] usb usb4: Product: UHCI Host Controller
[ 0.778222] usb usb4: Manufacturer: Linux 2.6.34-1-amd64 uhci_hcd
[ 0.778223] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.778298] hub 4-0:1.0: USB hub found
[ 0.778302] hub 4-0:1.0: 2 ports detected
[ 0.778365] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.778372] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.778375] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.778382] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.778410] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 0.778448] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.778450] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.778452] usb usb5: Product: UHCI Host Controller
[ 0.778454] usb usb5: Manufacturer: Linux 2.6.34-1-amd64 uhci_hcd
[ 0.778455] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.778529] hub 5-0:1.0: USB hub found
[ 0.778533] hub 5-0:1.0: 2 ports detected
[ 0.778594] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 0.778601] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.778604] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.778611] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.778637] uhci_hcd 0000:00:1d.1: irq 23, io base 0x00001880
[ 0.778670] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.778673] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.778675] usb usb6: Product: UHCI Host Controller
[ 0.778676] usb usb6: Manufacturer: Linux 2.6.34-1-amd64 uhci_hcd
[ 0.778678] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.778751] hub 6-0:1.0: USB hub found
[ 0.778755] hub 6-0:1.0: 2 ports detected
[ 0.778813] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 0.778819] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.778823] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.778829] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.778855] uhci_hcd 0000:00:1d.2: irq 23, io base 0x000018a0
[ 0.778888] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.778890] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.778892] usb usb7: Product: UHCI Host Controller
[ 0.778894] usb usb7: Manufacturer: Linux 2.6.34-1-amd64 uhci_hcd
[ 0.778896] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.778975] hub 7-0:1.0: USB hub found
[ 0.778978] hub 7-0:1.0: 2 ports detected
[ 0.788286] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.788290] pci 0000:00:02.0: setting latency timer to 64
[ 0.827724] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 0.827727] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 0.827778] alloc irq_desc for 30 on node -1
[ 0.827780] alloc kstat_irqs on node -1
[ 0.827789] pci 0000:00:02.0: irq 30 for MSI/MSI-X
[ 0.829858] acpi device:06: registered as cooling_device0
[ 0.830125] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input3
[ 0.830131] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.830161] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 0.831912] firewire_ohci: Added fw-ohci device 0000:09:04.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 0.943736] ata1.00: ATAPI: Optiarc DVD RW AD-7913A, 1.00, max UDMA/33
[ 0.960059] ata1.00: configured for UDMA/33
[ 0.962699] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7913A 1.00 PQ: 0 ANSI: 5
[ 1.100026] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.100029] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.100054] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.101660] ata3.00: unexpected _GTF length (8)
[ 1.101793] ata3.00: ATA-8: WDC WD5000BEVT-22ZAT0, 01.01A01, max UDMA/133
[ 1.101796] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.103476] ata3.00: unexpected _GTF length (8)
[ 1.103627] ata3.00: configured for UDMA/133
[ 1.116085] scsi 2:0:0:0: Direct-Access ATA WDC WD5000BEVT-2 01.0 PQ: 0 ANSI: 5
[ 1.133302] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.133305] Uniform CD-ROM driver Revision: 3.20
[ 1.133393] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.133532] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.133581] sd 2:0:0:0: [sda] Write Protect is off
[ 1.133583] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.133605] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.133737] sda:
[ 1.136788] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.137096] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.164615] sda1 sda2 sda3 sda4 <
[ 1.169014] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1.173462] sda5 sda6 >
[ 1.194470] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.303402] usb 1-2: New USB device found, idVendor=05ca, idProduct=183a
[ 1.303405] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.333071] firewire_core: created device fw0: GUID 08004603026daac2, S400
[ 1.656008] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 1.708496] PM: Starting manual resume from disk
[ 1.708499] PM: Resume from partition 8:6
[ 1.708500] PM: Checking hibernation image.
[ 1.708665] PM: Error -22 checking image file
[ 1.708666] PM: Resume from disk failed.
[ 1.750697] kjournald starting. Commit interval 5 seconds
[ 1.750704] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 1.831854] usb 3-1: New USB device found, idVendor=147e, idProduct=2016
[ 1.831857] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.831860] usb 3-1: Product: Fingerprint Sensor
[ 1.831861] usb 3-1: Manufacturer: TouchStrip
[ 2.072009] usb 7-1: new full speed USB device using uhci_hcd and address 2
[ 2.286743] usb 7-1: New USB device found, idVendor=044e, idProduct=300d
[ 2.286745] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.286747] usb 7-1: Product: UGX
[ 2.286749] usb 7-1: Manufacturer: ALPS
[ 2.286750] usb 7-1: SerialNumber: 011cfe29
[ 3.366803] udev: starting version 151
[ 3.616352] Monitor-Mwait will be used to enter C-1 state
[ 3.635699] Monitor-Mwait will be used to enter C-2 state
[ 3.635708] Marking TSC unstable due to TSC halts in idle
[ 3.677174] Switching to clocksource hpet
[ 3.694402] ACPI: AC Adapter [ACAD] (on-line)
[ 3.767682] yenta_cardbus 0000:09:04.0: CardBus bridge found [104d:9008]
[ 3.767710] yenta_cardbus 0000:09:04.0: CardBus bridge to [bus 0a-0d]
[ 3.767713] yenta_cardbus 0000:09:04.0: bridge window [io 0x6000-0x60ff]
[ 3.767719] yenta_cardbus 0000:09:04.0: bridge window [io 0x6400-0x64ff]
[ 3.767726] yenta_cardbus 0000:09:04.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
[ 3.767732] yenta_cardbus 0000:09:04.0: bridge window [mem 0xc4400000-0xc47fffff]
[ 3.767741] yenta_cardbus 0000:09:04.0: Using CSCINT to route CSC interrupts to PCI
[ 3.767743] yenta_cardbus 0000:09:04.0: Routing CardBus interrupts to PCI
[ 3.767749] yenta_cardbus 0000:09:04.0: TI: mfunc 0x01a21b22, devctl 0x64
[ 3.947031] ACPI: Battery Slot [BAT1] (battery present)
[ 3.996829] yenta_cardbus 0000:09:04.0: ISA IRQ mask 0x0cf8, PCI irq 20
[ 3.996834] yenta_cardbus 0000:09:04.0: Socket status: 30000006
[ 3.996837] pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d
[ 3.996847] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [io 0x6000-0x6fff]
[ 3.996850] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0xfc200000-0xfc2fffff]
[ 3.996853] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc200000-0xfc2fffff: excluding 0xfc200000-0xfc20ffff
[ 3.996867] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref]
[ 3.996870] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc3ffffff: excluding 0xc0000000-0xc3ffffff
[ 3.996888] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [io 0x0000-0x0cf7]
[ 3.996890] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [io 0x0d00-0xffff]
[ 3.996892] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0x000a0000-0x000bffff]
[ 3.996895] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0bffff: clean.
[ 3.996907] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0x000d0000-0x000d3fff]
[ 3.996910] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0d3fff: clean.
[ 3.996914] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0x000d4000-0x000d7fff]
[ 3.996916] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d4000-0x0d7fff: clean.
[ 3.996920] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0x000d8000-0x000dbfff]
[ 3.996922] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d8000-0x0dbfff: clean.
[ 3.996927] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0x000dc000-0x000dffff]
[ 3.996929] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0dc000-0x0dffff: clean.
[ 3.996933] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xdfffffff]
[ 3.996936] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xdfffffff: excluding 0xc0000000-0xc47fffff 0xc8000000-0xc9ffffff 0xcc000000-0xcdffffff 0xd0000000-0xdfffffff
[ 3.996998] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xfebfffff]
[ 3.997001] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xfebfffff: excluding 0xf0000000-0xfc7fffff 0xfe800000-0xfeffffff
[ 3.997035] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0xfed40000-0xfed44fff]
[ 3.997038] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfed40000-0xfed44fff: excluding 0xfed44000-0xfed45fff
[ 4.048699] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 4.048704] ACPI: resource 0000:00:1f.3 [io 0x1c20-0x1c3f] conflicts with ACPI region SMBI [io 0x1c20-0x1c2f 64bit window disabled]
[ 4.048707] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.224934] tifm_7xx1 0000:09:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 4.425733] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 4.425789] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 4.425843] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 4.553162] Bluetooth: Core ver 2.15
[ 4.553206] NET: Registered protocol family 31
[ 4.553208] Bluetooth: HCI device and connection manager initialized
[ 4.553210] Bluetooth: HCI socket layer initialized
[ 4.605395] sony-laptop: Sony Programmable IO Control Driver v0.6.
[ 4.605412] sony-laptop: detected Type3 model
[ 4.608373] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/SNY6001:00/input/input4
[ 4.608452] input: Sony Vaio Jogdial as /devices/virtual/input/input5
[ 4.608545] sony-laptop: device allocated minor is 58
[ 4.618312] sony-laptop: Sony Notebook Control Driver v0.6.
[ 4.618318] sony-laptop: brightness ignored, must be controlled by ACPI video driver
[ 4.758807] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 4.758914] usbcore: registered new interface driver btusb
[ 4.759294] cfg80211: Calling CRDA to update world regulatory domain
[ 4.807955] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6
[ 4.824145] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
[ 5.212272] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5.214023] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5.214032] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.214142] alloc irq_desc for 31 on node -1
[ 5.214144] alloc kstat_irqs on node -1
[ 5.214157] HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X
[ 5.214197] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.255066] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 5.255068] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 5.255124] iwlagn 0000:06:00.0: power state changed by ACPI to D0
[ 5.255133] iwlagn 0000:06:00.0: power state changed by ACPI to D0
[ 5.255143] iwlagn 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.255151] iwlagn 0000:06:00.0: setting latency timer to 64
[ 5.255180] iwlagn 0000:06:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 5.294033] iwlagn 0000:06:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 5.294095] alloc irq_desc for 32 on node -1
[ 5.294097] alloc kstat_irqs on node -1
[ 5.294127] iwlagn 0000:06:00.0: irq 32 for MSI/MSI-X
[ 5.294362] iwlagn 0000:06:00.0: firmware: requesting iwlwifi-4965-2.ucode
[ 5.376559] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.376634] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.470928] iwlagn 0000:06:00.0: loaded firmware version 228.61.2.24
[ 5.571421] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.978173] Adding 7952136k swap on /dev/sda6. Priority:-1 extents:1 across:7952136k
[ 7.213309] EXT3-fs (sda1): using internal journal
[ 7.382634] device-mapper: uevent: version 1.0.3
[ 7.382750] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 8.216114] kjournald starting. Commit interval 5 seconds
[ 8.216391] EXT3-fs (sda5): using internal journal
[ 8.216396] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 8.731196] loop: module loaded
[ 9.750156] fuse init (API version 7.13)
[ 10.079547] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 10.302424] sky2 0000:07:00.0: eth0: enabling interface
[ 10.302929] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.033227] Bluetooth: L2CAP ver 2.14
[ 15.033233] Bluetooth: L2CAP socket layer initialized
[ 15.090485] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.090491] Bluetooth: BNEP filters: protocol multicast
[ 15.098846] Bluetooth: RFCOMM TTY layer initialized
[ 15.098856] Bluetooth: RFCOMM socket layer initialized
[ 15.098860] Bluetooth: RFCOMM ver 1.11
[ 15.132120] Bridge firewalling registered
[ 15.194401] Bluetooth: SCO (Voice Link) ver 0.6
[ 15.194407] Bluetooth: SCO socket layer initialized
[ 17.214842] lp: driver loaded but no devices found
[ 17.224912] ppdev: user-space parallel port driver
[ 17.287058] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Reply to: