Bug#589452: nouveau driver doesn't work with interlaced video modes
Package: xserver-xorg-video-nouveau
Version: 1:0.0.15+git20100329+7858345-4
My CRT monitor has a fairly restrictive maximum pixel clock rate: 70 MHz.
Therefore, in order to display 1024x768 resolution with no perceptible
flicker, an interlaced video mode is required. The only non-interlaced
VESA standard video mode for 1024x768 resolution that my monitor can
display is 1024x768@60Hz, which requires a pixel clock rate of 65 MHz,
which is very near the maximum pixel clock rate for my monitor. But a
60 Hz vertical refresh rate causes noticeable flicker and eye strain.
Higher vertical refresh rates require a pixel clock rate which is too high.
The only solution is an interlaced video mode. There is a VESA standard
video mode that works well: 1024x768@87Hz interlaced, which only requires
a 44.9 MHz pixel clock rate. In addition, I developed a custom video mode
to get the most out of my monitor: 1024x768@100Hz interlaced, which drives
the monitor at its maximum vertical refresh rate of 100 Hz. This video
mode requires a 54 Mhz pixel clock rate, which is still well below 70 MHz.
Both of these modes work well with the nv driver (xserver-xorg-video-nv).
But when I try to use either of these two modes with the nouveau driver,
I get a black screen.
Here is my xorg.conf file as configured
for the VESA standard 1024x768@87Hz interlaced mode:
----------
Section "Files"
#
# Nothing here.
#
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nouveau"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
# Modeline "custom" 54 1024 1048 1184 1344 768 771 777 807 -Hsync -Vsync Interlace
Modeline "custom" 44.9 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "custom" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
----------
And here is the Xorg.0.log file which results:
----------
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.14-dsa-ia32 i686 Debian
Current Operating System: Linux smp3 2.6.32-5-686 #1 SMP Tue Jun 1 04:59:47 UTC 2010 i686
Kernel command line: auto BOOT_IMAGE=Linux ro root=UUID=055d446a-977d-4aa6-877d-62c716f5e85a
Build Date: 03 June 2010 04:08:50PM
xorg-server 2:1.7.7-2 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 17 13:59:10 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81eac60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0028:10de:0060 nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] rev 21, Mem @ 0xfd000000/16777216, 0xf8000000/33554432, BIOS @ 0x????????/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nouveau"
(II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.15
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU driver Date: Tue Mar 16 13:08:37 2010 +1000
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) Primary Device is: PCI 01@00:00:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] nouveau interface version: 0.0.15
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(--) NOUVEAU(0): Chipset: "NVIDIA NV05"
(**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(==) NOUVEAU(0): Using HW cursor
(II) NOUVEAU(0): Output VGA-1 using monitor section Configured Monitor
(II) NOUVEAU(0): EDID for output VGA-1
(II) NOUVEAU(0): Manufacturer: IBM Model: 198d Serial#: 16843009
(II) NOUVEAU(0): Year: 1998 Week: 26
(II) NOUVEAU(0): EDID Version: 1.1
(II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) NOUVEAU(0): Sync: Separate
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 28 vert.: 21
(II) NOUVEAU(0): Gamma: 2.88
(II) NOUVEAU(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
(II) NOUVEAU(0): redX: 0.619 redY: 0.347 greenX: 0.280 greenY: 0.601
(II) NOUVEAU(0): blueX: 0.144 blueY: 0.059 whiteX: 0.297 whiteY: 0.320
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 1024x768@87Hz (interlaced)
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) NOUVEAU(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 52.6 MHz Image Size: 262 x 198 mm
(II) NOUVEAU(0): h_active: 960 h_sync: 972 h_sync_end 1080 h_blank_end 1260 h_border: 0
(II) NOUVEAU(0): v_active: 529 v_sync: 530 v_sync_end 540 v_blanking: 557 v_border: 0
(II) NOUVEAU(0): Monitor name: IBM G51
(II) NOUVEAU(0): Ranges: V min: 55 V max: 100 Hz, H min: 30 H max: 54 kHz, PixClock max 70 MHz
(II) NOUVEAU(0): Serial No: 66-LP832
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff00244d8d1901010101
(II) NOUVEAU(0): 1a080101681c15bcc8bfc09e58479924
(II) NOUVEAU(0): 0f4c52ad580031594559010101010101
(II) NOUVEAU(0): 0101010101018f14c02c31111c200c6c
(II) NOUVEAU(0): 1a0006c61000001a000000fc0049424d
(II) NOUVEAU(0): 204735310a2020202020000000fd0037
(II) NOUVEAU(0): 641e3607000a202020202020000000ff
(II) NOUVEAU(0): 0036362d4c503833320a202020200053
(II) NOUVEAU(0): EDID vendor "IBM", prod id 6541
(II) NOUVEAU(0): Using EDID range info for horizontal sync
(II) NOUVEAU(0): Using EDID range info for vertical refresh
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "960x529"x0.0 52.63 960 972 1080 1260 529 530 540 557 +hsync -vsync (41.8 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) NOUVEAU(0): Printing probed modes for output VGA-1
(II) NOUVEAU(0): Modeline "custom"x87.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz)
(II) NOUVEAU(0): Modeline "960x529"x75.0 52.63 960 972 1080 1260 529 530 540 557 +hsync -vsync (41.8 kHz)
(II) NOUVEAU(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Output VGA-1 connected
(II) NOUVEAU(0): Using user preference for initial modes
(II) NOUVEAU(0): Output VGA-1 using initial mode custom
(II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(--) NOUVEAU(0): Virtual size is 1024x768 (pitch 1024)
(**) NOUVEAU(0): Mode "custom": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 87.0 Hz (I)
(II) NOUVEAU(0): Modeline "custom"x87.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 87.0 Hz (I)
(II) NOUVEAU(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz)
(**) NOUVEAU(0): Driver mode "960x529": 52.6 MHz (scaled from 0.0 MHz), 41.8 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "960x529"x75.0 52.63 960 972 1080 1260 529 530 540 557 +hsync -vsync (41.8 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
(II) NOUVEAU(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(**) NOUVEAU(0): Display dimensions: (280, 210) mm
(**) NOUVEAU(0): DPI set to (92, 92)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) Depth 24 pixmap format is 32 bpp
(II) NOUVEAU(0): Opened GPU channel 1
(II) NOUVEAU(0): [DRI2] Setup complete
(II) NOUVEAU(0): GART: 64MiB available
(EE) NOUVEAU(0): Unable to allocate GART memory
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) UploadToScreen
(II) DownloadFromScreen
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): NVEnterVT is called.
(==) NOUVEAU(0): DPMS enabled
(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(EE) AIGLX error: dlopen of /usr/lib/dri/nouveau_vieux_dri.so failed (/usr/lib/dri/nouveau_vieux_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NOUVEAU(0): Setting screen physical size to 270 x 203
resize called 1024 768
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event4)
(**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event4"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found relative axes
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
(II) NOUVEAU(0): NVLeaveVT is called.
----------
Again, the symptom is a black screen. The X server stays running, but no output is
visible. Switching to a text console works OK.
--
.''`. Stephen Powell
: :' :
`. `'`
`-
Reply to: