[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#586353: xserver-xorg-core: input devices disabled by X server



Package: xserver-xorg-core
Version: 2:1.7.7-1
Severity: normal


Apparently X server refuses to accept input devices after coldplug
effectively disabling input.

The running X server is slightly otdated, not sure if it applies to
current X server as well.


-- Package-specific info:
/var/lib/x11/X.roster does not exist.

/var/lib/x11/X.md5sum does not exist.

X server symlink status:
lrwxrwxrwx 1 root root 13 Jan 14  2008 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1877152 May  4 18:26 /usr/bin/Xorg

/var/lib/x11/xorg.conf.roster does not exist.

VGA-compatible devices on PCI bus:
04:00.0 VGA compatible controller: ATI Technologies Inc RV515GL [FireGL V3350]

/var/lib/x11/xorg.conf.md5sum does not exist.

Xorg X server configuration file status:
-rw-r--r-- 1 root root 1005 Jan 31 00:27 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerFlags"
Option "HandleSpecialKeys" "Always"
Option "AllowDeactivateGrabs" "on"
Option "AllowClesedownGrabs" "on"
#Option "AutoAddDevices" "off"
EndSection

Section "Device"
Identifier "dev"
Option "AccelMethod" "EXA"
EndSection

Section "Screen"
Identifier "DefaultScreen"
Device "dev"
SubSection "Display"
Depth 24
Virtual 2048 1024
EndSubSection
DefaultDepth 24
EndSection


Kernel version (/proc/version):
Linux version 2.6.34-rc4-amd64 (root@heretic) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #2 SMP Tue Apr 13 13:22:12 CEST 2010

Xorg X server log files on system:
-rw-r--r-- 1 root root 155400 Jan 18 14:05 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 704179 Jun 18 18:59 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.7.6.901 (1.7.7 RC 1)
Release Date: 2010-04-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-4-amd64 x86_64 Debian
Current Operating System: Linux heretic 2.6.34-rc4-amd64 #2 SMP Tue Apr 13 13:22:12 CEST 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34-rc4-amd64 root=UUID=ae7d5095-c8b3-4205-af0e-032b0e124ec3 ro quiet
Build Date: 19 April 2010  04:58:05PM
xorg-server 2:1.7.6.901-3 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May  2 08:00:34 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "DefaultScreen" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "dev"
(==) No monitor specified for screen "DefaultScreen".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c5dc0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 8

(--) PCI:*(0:4:0:0) 1002:7153:1002:1b02 ATI Technologies Inc RV515GL [FireGL V3350] rev 0, Mem @ 0xd0000000/268435456, 0xcffe0000/65536, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
(--) PCI: (0:4:0:1) 1002:7173:1002:1b03 ATI Technologies Inc RV515GL [FireGL V3350] (Secondary) rev 0, Mem @ 0xcfff0000/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched ati as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 6.12.6
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 6.13.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
	ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
	ATI FirePro M5750, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
	ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
	ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
	ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
	ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
	ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
	ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
	CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
	CEDAR
(II) Primary Device is: PCI 04@00:00:0
(II) [KMS] Kernel modesetting enabled.
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AccelMethod" "EXA"
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI FireGL V3350" (ChipID = 0x7153)
(II) RADEON(0): PCIE card detected
(II) RADEON(0): KMS Color Tiling: disabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:04:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:04:00.0
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): Output DVI-1 has no monitor section
(II) RADEON(0): EDID for output DVI-0
(II) RADEON(0): Manufacturer: NEC  Model: 65fa  Serial#: 16843009
(II) RADEON(0): Year: 2003  Week: 8
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 30  vert.: 23
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.631 redY: 0.347   greenX: 0.309 greenY: 0.583
(II) RADEON(0): blueX: 0.149 blueY: 0.113   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 78.8 MHz   Image Size:  304 x 228 mm
(II) RADEON(0): h_active: 1024  h_sync: 1040  h_sync_end 1136 h_blank_end 1312 h_border: 0
(II) RADEON(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 800 v_border: 0
(II) RADEON(0): Ranges: V min: 55 V max: 75 Hz, H min: 31 H max: 60 kHz, PixClock max 80 MHz
(II) RADEON(0): Monitor name: NEC LCD1560NX
(II) RADEON(0): Serial No: 32026678YB
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff0038a3fa6501010101
(II) RADEON(0): 	080d0103801e1778eab145a1584f9526
(II) RADEON(0): 	1d5054bfee0001010101010101010101
(II) RADEON(0): 	010101010101c31e0020410020301060
(II) RADEON(0): 	130030e41000001e000000fd00374b1f
(II) RADEON(0): 	3c08000a202020202020000000fc004e
(II) RADEON(0): 	4543204c4344313536304e58000000ff
(II) RADEON(0): 	00333230323636373859420a20200061
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Printing probed modes for output DVI-0
(II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): EDID for output DVI-1
(II) RADEON(0): Manufacturer: ENC  Model: 1788  Serial#: 16843009
(II) RADEON(0): Year: 2005  Week: 34
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 34  vert.: 28
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.650 redY: 0.330   greenX: 0.300 greenY: 0.600
(II) RADEON(0): blueX: 0.150 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 271 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: 37872085
(II) RADEON(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 110 MHz
(II) RADEON(0): Monitor name: M1700
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff0015c3881701010101
(II) RADEON(0): 	220f010380221c78eaaea5a6544c9926
(II) RADEON(0): 	145054a1080081800101010101010101
(II) RADEON(0): 	010101010101302a009851002a403070
(II) RADEON(0): 	1300520f1100001e000000ff00333738
(II) RADEON(0): 	37323038350a20202020000000fd003b
(II) RADEON(0): 	3d1f400b000a202020202020000000fc
(II) RADEON(0): 	004d313730300a2020202020202000a9
(II) RADEON(0): Printing probed modes for output DVI-1
(II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Output DVI-0 connected
(II) RADEON(0): Output DVI-1 connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output DVI-0 using initial mode 1024x768
(II) RADEON(0): Output DVI-1 using initial mode 1024x768
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fac0000
(II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
(**) RADEON(0): Display dimensions: (300, 230) mm
(**) RADEON(0): DPI set to (173, 113)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 2.5.0
	ABI class: X.Org Video Driver, version 6.0
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): [DRI2] Setup complete
(II) RADEON(0): Front buffer size: 8192K
(II) RADEON(0): VRAM usage limit set to 223718K
(==) RADEON(0): Backing store disabled
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II)         DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 270 x 203
(II) RADEON(0): Allocate new frame buffer 1024x768 stride 1024
(II) RADEON(0): VRAM usage limit set to 228326K
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event0)
(**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event0"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event1)
(**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event1"
(II) USB-compliant keyboard: Found 1 mouse buttons
(II) USB-compliant keyboard: Found scroll wheel(s)
(II) USB-compliant keyboard: Found relative axes
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found absolute axes
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: initialized for relative axes.
(WW) USB-compliant keyboard: ignoring absolute axes.
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 0.10.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech USB Trackball (/dev/input/event6)
(**) Logitech USB Trackball: Applying InputClass "evdev pointer catchall"
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event6"
(II) Logitech USB Trackball: Found 9 mouse buttons
(II) Logitech USB Trackball: Found relative axes
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(II) Logitech USB Trackball: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB Trackball (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Allocate new frame buffer 1280x1024 stride 1280
(II) RADEON(0): VRAM usage limit set to 226483K
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Allocate new frame buffer 2048x1024 stride 2048
(II) RADEON(0): VRAM usage limit set to 223718K
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Allocate new frame buffer 1280x1024 stride 1280
(II) RADEON(0): VRAM usage limit set to 226483K
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Allocate new frame buffer 2048x1024 stride 2048
(II) RADEON(0): VRAM usage limit set to 223718K
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(II) config/udev: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event0)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event0"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event1)
(**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event1"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event2)
(**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event2"
(II) USB-compliant keyboard: Found 1 mouse buttons
(II) USB-compliant keyboard: Found scroll wheel(s)
(II) USB-compliant keyboard: Found relative axes
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found absolute axes
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: initialized for relative axes.
(WW) USB-compliant keyboard: ignoring absolute axes.
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(EE) USB-compliant keyboard: device name changed: USB-compliant keyboard != Wacom Bamboo
(EE) USB-compliant keyboard: Device has changed - disabling.
(II) config/udev: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Logitech USB Trackball
(II) Logitech USB Trackball: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event1)
(**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event1"
(II) USB-compliant keyboard: Found 1 mouse buttons
(II) USB-compliant keyboard: Found scroll wheel(s)
(II) USB-compliant keyboard: Found relative axes
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found absolute axes
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: initialized for relative axes.
(WW) USB-compliant keyboard: ignoring absolute axes.
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event0)
(**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event0"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Allocate new frame buffer 1280x1024 stride 1280
(II) RADEON(0): VRAM usage limit set to 226483K
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Allocate new frame buffer 2048x1024 stride 2048
(II) RADEON(0): VRAM usage limit set to 223718K
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) Open ACPI successful (/var/run/acpid.socket)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event0)
(**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event0"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event1)
(**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event1"
(II) USB-compliant keyboard: Found 1 mouse buttons
(II) USB-compliant keyboard: Found scroll wheel(s)
(II) USB-compliant keyboard: Found relative axes
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found absolute axes
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: initialized for relative axes.
(WW) USB-compliant keyboard: ignoring absolute axes.
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event2)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event2"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event2"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event0)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event0"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event1)
(**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event1"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event2)
(**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event2"
(II) USB-compliant keyboard: Found 1 mouse buttons
(II) USB-compliant keyboard: Found scroll wheel(s)
(II) USB-compliant keyboard: Found relative axes
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found absolute axes
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: initialized for relative axes.
(WW) USB-compliant keyboard: ignoring absolute axes.
(II) config/udev: Adding input device USB-compliant keyboard (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event0)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event0"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event0)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event0"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event0)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event0"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event0)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event0"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event0)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event0"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event0)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event0"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo: Error reading wacom device : No such device
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Power Button
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device Wacom Bamboo
(II) Wacom Bamboo: removing automatically added devices.
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo pad'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo cursor'
(II) UnloadModule: "wacom"
(II) Wacom Bamboo: removing dependent device 'Wacom Bamboo eraser'
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,cz(qwerty)"
(**) Option "xkb_options" "ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle"
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Wacom Bamboo (/dev/input/event0)
(**) Wacom Bamboo: Applying InputClass "evdev tablet catchall"
(**) Wacom Bamboo: Applying InputClass "Wacom class"
(**) Option "Device" "/dev/input/event0"
(II) Wacom Bamboo: type not specified, assuming 'stylus'.
(II) Wacom Bamboo: other types will be automatically added.
(**) Wacom Bamboo: always reports core events
(II) Wacom Bamboo: hotplugging dependent devices.
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo eraser: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: ERASER)
(--) Wacom Bamboo eraser: using pressure threshold of 27 for button 1
(--) Wacom Bamboo eraser: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo cursor: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: CURSOR)
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "Device" "/dev/input/event0"
(**) Wacom Bamboo pad: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: PAD)
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Wacom Bamboo: hotplugging completed.
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: STYLUS)
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[mi] EQ overflowing. The server is probably stuck in an infinite loop.

Backtrace:
0: /usr/bin/X11/X (xorg_backtrace+0x28) [0x4ac648]
1: /usr/bin/X11/X (mieqEnqueue+0x1f4) [0x4a1db4]
2: /usr/bin/X11/X (xf86PostMotionEventP+0xc4) [0x464594]
3: /usr/bin/X11/X (xf86PostMotionEvent+0xa9) [0x464739]
4: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x726f) [0x7fa130d1f26f]
5: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x7f45) [0x7fa130d1ff45]
6: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0xb55b) [0x7fa130d2355b]
7: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x4a63) [0x7fa130d1ca63]
8: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x4b2d) [0x7fa130d1cb2d]
9: /usr/bin/X11/X (0x400000+0x73557) [0x473557]
10: /usr/bin/X11/X (0x400000+0x11a3b4) [0x51a3b4]
11: /lib/libpthread.so.0 (0x7fa1353e9000+0xe990) [0x7fa1353f7990]
12: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x88df) [0x7fa134d538df]
13: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x36a59) [0x7fa134d81a59]
14: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x2f5eb) [0x7fa134d7a5eb]
15: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x37322) [0x7fa134d82322]
16: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x38690) [0x7fa134d83690]
17: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x2f2fa) [0x7fa134d7a2fa]
18: /usr/lib/libpixman-1.so.0 (pixman_image_composite+0x17c) [0x7fa134d7b12c]
19: /usr/lib/xorg/modules/libfb.so (fbComposite+0x220) [0x7fa131a3d3b0]
20: /usr/lib/xorg/modules/libexa.so (0x7fa131812000+0x10a44) [0x7fa131822a44]
21: /usr/lib/xorg/modules/libexa.so (0x7fa131812000+0xdd63) [0x7fa13181fd63]
22: /usr/bin/X11/X (0x400000+0xda6d0) [0x4da6d0]
23: /usr/bin/X11/X (0x400000+0xceeee) [0x4ceeee]
24: /usr/bin/X11/X (0x400000+0x48d44) [0x448d44]
25: /usr/bin/X11/X (0x400000+0x25c1a) [0x425c1a]
26: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fa133ef5abd]
27: /usr/bin/X11/X (0x400000+0x257c9) [0x4257c9]
[mi] EQ overflowing. The server is probably stuck in an infinite loop.

Backtrace:
0: /usr/bin/X11/X (xorg_backtrace+0x28) [0x4ac648]
1: /usr/bin/X11/X (mieqEnqueue+0x1f4) [0x4a1db4]
2: /usr/bin/X11/X (xf86PostMotionEventP+0xc4) [0x464594]
3: /usr/bin/X11/X (xf86PostMotionEvent+0xa9) [0x464739]
4: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x726f) [0x7fa130d1f26f]
5: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x7f45) [0x7fa130d1ff45]
6: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0xb55b) [0x7fa130d2355b]
7: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x4a63) [0x7fa130d1ca63]
8: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x4b2d) [0x7fa130d1cb2d]
9: /usr/bin/X11/X (0x400000+0x73557) [0x473557]
10: /usr/bin/X11/X (0x400000+0x11a3b4) [0x51a3b4]
11: /lib/libpthread.so.0 (0x7fa1353e9000+0xe990) [0x7fa1353f7990]
12: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x88df) [0x7fa134d538df]
13: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x36b2b) [0x7fa134d81b2b]
14: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x2f5eb) [0x7fa134d7a5eb]
15: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x37322) [0x7fa134d82322]
16: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x38690) [0x7fa134d83690]
17: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x2f2fa) [0x7fa134d7a2fa]
18: /usr/lib/libpixman-1.so.0 (pixman_image_composite+0x17c) [0x7fa134d7b12c]
19: /usr/lib/xorg/modules/libfb.so (fbComposite+0x220) [0x7fa131a3d3b0]
20: /usr/lib/xorg/modules/libexa.so (0x7fa131812000+0x10a44) [0x7fa131822a44]
21: /usr/lib/xorg/modules/libexa.so (0x7fa131812000+0xdd63) [0x7fa13181fd63]
22: /usr/bin/X11/X (0x400000+0xda6d0) [0x4da6d0]
23: /usr/bin/X11/X (0x400000+0xceeee) [0x4ceeee]
24: /usr/bin/X11/X (0x400000+0x48d44) [0x448d44]
25: /usr/bin/X11/X (0x400000+0x25c1a) [0x425c1a]
26: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fa133ef5abd]
27: /usr/bin/X11/X (0x400000+0x257c9) [0x4257c9]
[mi] EQ overflowing. The server is probably stuck in an infinite loop.

Backtrace:
0: /usr/bin/X11/X (xorg_backtrace+0x28) [0x4ac648]
1: /usr/bin/X11/X (mieqEnqueue+0x1f4) [0x4a1db4]
2: /usr/bin/X11/X (xf86PostMotionEventP+0xc4) [0x464594]
3: /usr/bin/X11/X (xf86PostMotionEvent+0xa9) [0x464739]
4: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x726f) [0x7fa130d1f26f]
5: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x7f45) [0x7fa130d1ff45]
6: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0xb55b) [0x7fa130d2355b]
7: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x4a63) [0x7fa130d1ca63]
8: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x4b2d) [0x7fa130d1cb2d]
9: /usr/bin/X11/X (0x400000+0x73557) [0x473557]
10: /usr/bin/X11/X (0x400000+0x11a3b4) [0x51a3b4]
11: /lib/libpthread.so.0 (0x7fa1353e9000+0xe990) [0x7fa1353f7990]
12: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x88df) [0x7fa134d538df]
13: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x3641b) [0x7fa134d8141b]
14: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x2f5eb) [0x7fa134d7a5eb]
15: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x37322) [0x7fa134d82322]
16: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x38690) [0x7fa134d83690]
17: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x2f2fa) [0x7fa134d7a2fa]
18: /usr/lib/libpixman-1.so.0 (pixman_image_composite+0x17c) [0x7fa134d7b12c]
19: /usr/lib/xorg/modules/libfb.so (fbComposite+0x220) [0x7fa131a3d3b0]
20: /usr/lib/xorg/modules/libexa.so (0x7fa131812000+0x10a44) [0x7fa131822a44]
21: /usr/lib/xorg/modules/libexa.so (0x7fa131812000+0xdd63) [0x7fa13181fd63]
22: /usr/bin/X11/X (0x400000+0xda6d0) [0x4da6d0]
23: /usr/bin/X11/X (0x400000+0xceeee) [0x4ceeee]
24: /usr/bin/X11/X (0x400000+0x48d44) [0x448d44]
25: /usr/bin/X11/X (0x400000+0x25c1a) [0x425c1a]
26: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fa133ef5abd]
27: /usr/bin/X11/X (0x400000+0x257c9) [0x4257c9]
[mi] EQ overflowing. The server is probably stuck in an infinite loop.

Backtrace:
0: /usr/bin/X11/X (xorg_backtrace+0x28) [0x4ac648]
1: /usr/bin/X11/X (mieqEnqueue+0x1f4) [0x4a1db4]
2: /usr/bin/X11/X (xf86PostMotionEventP+0xc4) [0x464594]
3: /usr/bin/X11/X (xf86PostMotionEvent+0xa9) [0x464739]
4: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x726f) [0x7fa130d1f26f]
5: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x7f45) [0x7fa130d1ff45]
6: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0xb55b) [0x7fa130d2355b]
7: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x4a63) [0x7fa130d1ca63]
8: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x4b2d) [0x7fa130d1cb2d]
9: /usr/bin/X11/X (0x400000+0x73557) [0x473557]
10: /usr/bin/X11/X (0x400000+0x11a3b4) [0x51a3b4]
11: /lib/libpthread.so.0 (0x7fa1353e9000+0xe990) [0x7fa1353f7990]
12: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x88df) [0x7fa134d538df]
13: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x3641b) [0x7fa134d8141b]
14: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x2f5eb) [0x7fa134d7a5eb]
15: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x37322) [0x7fa134d82322]
16: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x38690) [0x7fa134d83690]
17: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x2f2fa) [0x7fa134d7a2fa]
18: /usr/lib/libpixman-1.so.0 (pixman_image_composite+0x17c) [0x7fa134d7b12c]
19: /usr/lib/xorg/modules/libfb.so (fbComposite+0x220) [0x7fa131a3d3b0]
20: /usr/lib/xorg/modules/libexa.so (0x7fa131812000+0x10a44) [0x7fa131822a44]
21: /usr/lib/xorg/modules/libexa.so (0x7fa131812000+0xdd63) [0x7fa13181fd63]
22: /usr/bin/X11/X (0x400000+0xda6d0) [0x4da6d0]
23: /usr/bin/X11/X (0x400000+0xceeee) [0x4ceeee]
24: /usr/bin/X11/X (0x400000+0x48d44) [0x448d44]
25: /usr/bin/X11/X (0x400000+0x25c1a) [0x425c1a]
26: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fa133ef5abd]
27: /usr/bin/X11/X (0x400000+0x257c9) [0x4257c9]
[mi] EQ overflowing. The server is probably stuck in an infinite loop.

Backtrace:
0: /usr/bin/X11/X (xorg_backtrace+0x28) [0x4ac648]
1: /usr/bin/X11/X (mieqEnqueue+0x1f4) [0x4a1db4]
2: /usr/bin/X11/X (xf86PostMotionEventP+0xc4) [0x464594]
3: /usr/bin/X11/X (xf86PostMotionEvent+0xa9) [0x464739]
4: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x726f) [0x7fa130d1f26f]
5: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x7f45) [0x7fa130d1ff45]
6: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0xb55b) [0x7fa130d2355b]
7: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x4a63) [0x7fa130d1ca63]
8: /usr/lib/xorg/modules/input/wacom_drv.so (0x7fa130d18000+0x4b2d) [0x7fa130d1cb2d]
9: /usr/bin/X11/X (0x400000+0x73557) [0x473557]
10: /usr/bin/X11/X (0x400000+0x11a3b4) [0x51a3b4]
11: /lib/libpthread.so.0 (0x7fa1353e9000+0xe990) [0x7fa1353f7990]
12: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x88df) [0x7fa134d538df]
13: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x36aba) [0x7fa134d81aba]
14: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x2f5eb) [0x7fa134d7a5eb]
15: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x37322) [0x7fa134d82322]
16: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x38690) [0x7fa134d83690]
17: /usr/lib/libpixman-1.so.0 (0x7fa134d4b000+0x2f2fa) [0x7fa134d7a2fa]
18: /usr/lib/libpixman-1.so.0 (pixman_image_composite+0x17c) [0x7fa134d7b12c]
19: /usr/lib/xorg/modules/libfb.so (fbComposite+0x220) [0x7fa131a3d3b0]
20: /usr/lib/xorg/modules/libexa.so (0x7fa131812000+0x10a44) [0x7fa131822a44]
21: /usr/lib/xorg/modules/libexa.so (0x7fa131812000+0xdd63) [0x7fa13181fd63]
22: /usr/bin/X11/X (0x400000+0xda6d0) [0x4da6d0]
23: /usr/bin/X11/X (0x400000+0xceeee) [0x4ceeee]
24: /usr/bin/X11/X (0x400000+0x48d44) [0x448d44]
25: /usr/bin/X11/X (0x400000+0x25c1a) [0x425c1a]
26: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fa133ef5abd]
27: /usr/bin/X11/X (0x400000+0x257c9) [0x4257c9]
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
FreeType: couldn't find encoding 'iso8859-14' for '/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/Arial.ttf'
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Allocate new frame buffer 1024x768 stride 1024
(II) RADEON(0): VRAM usage limit set to 228326K
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Allocate new frame buffer 1280x1024 stride 1280
(II) RADEON(0): VRAM usage limit set to 226483K
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Allocate new frame buffer 2048x1024 stride 2048
(II) RADEON(0): VRAM usage limit set to 223718K
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Allocate new frame buffer 1280x1024 stride 1280
(II) RADEON(0): VRAM usage limit set to 226483K
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Allocate new frame buffer 2048x1024 stride 2048
(II) RADEON(0): VRAM usage limit set to 223718K
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Allocate new frame buffer 1024x768 stride 1024
(II) RADEON(0): VRAM usage limit set to 228326K
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Allocate new frame buffer 1280x1024 stride 1280
(II) RADEON(0): VRAM usage limit set to 226483K
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Allocate new frame buffer 2048x1024 stride 2048
(II) RADEON(0): VRAM usage limit set to 223718K
(II) RADEON(0): EDID vendor "ENC", prod id 6024
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) Wacom Bamboo: Wacom USB Bamboo tablet speed=38400 maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540  tilt=disabled
(--) Wacom Bamboo: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo eraser: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo cursor: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(--) Wacom Bamboo pad: top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(EE) Wacom Bamboo pad: Error reading wacom device : No such device
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(EE) Wacom Bamboo: unable to ioctl max values.
[dix] couldn't enable device 11
(EE) Wacom Bamboo eraser: unable to ioctl max values.
[dix] couldn't enable device 8
(EE) Wacom Bamboo cursor: unable to ioctl max values.
[dix] couldn't enable device 9
(EE) Wacom Bamboo pad: unable to ioctl max values.
[dix] couldn't enable device 10
(EE) USB-compliant keyboard: device name changed: USB-compliant keyboard != Microsoft Microsoft® Digital Media oard 3000
(EE) USB-compliant keyboard: Device has changed - disabling.
(EE) USB-compliant keyboard: device name changed: USB-compliant keyboard != Wacom Bamboo
(EE) USB-compliant keyboard: Device has changed - disabling.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(EE) Power Button: Failed to reopen device after 10 attempts.
(EE) Power Button: Failed to reopen device after 10 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) RADEON(0): EDID vendor "NEC", prod id 26106
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(EE) Wacom Bamboo: unable to ioctl max values.
[dix] couldn't enable device 11
(EE) Wacom Bamboo eraser: unable to ioctl max values.
[dix] couldn't enable device 8
(EE) Wacom Bamboo cursor: unable to ioctl max values.
[dix] couldn't enable device 9
(EE) Wacom Bamboo pad: unable to ioctl max values.
[dix] couldn't enable device 10
(EE) USB-compliant keyboard: device name changed: USB-compliant keyboard != Microsoft Microsoft® Digital Media oard 3000
(EE) USB-compliant keyboard: Device has changed - disabling.
(EE) USB-compliant keyboard: device name changed: USB-compliant keyboard != Wacom Bamboo
(EE) USB-compliant keyboard: Device has changed - disabling.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)

udev information:
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input274/event0
N: input/event0
S: char/13:64
S: input/by-id/usb-Microsoft_Microsoft®_Digital_Media_oard_3000-event-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:1.4:1.0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input274/event0
E: SUBSYSTEM=input
E: DEVNAME=input/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_Digital_Media_oard_3000
E: ID_MODEL_ENC=Microsoft®\x20Digital\x20Media\x20oard\x203000
E: ID_MODEL_ID=0732
E: ID_REVISION=0200
E: ID_SERIAL=Microsoft_Microsoft®_Digital_Media_oard_3000
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.4:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=us,cz(qwerty)
E: MAJOR=13
E: MINOR=64
E: DEVLINKS=/dev/char/13:64 /dev/input/by-id/usb-Microsoft_Microsoft®_Digital_Media_oard_3000-event-kbd /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.4:1.0-event-kbd
E: XKBOPTIONS=ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle
E: x11_options:xkb_layout=us,cz(qwerty)
E: x11_options:xkb_options=ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle

P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input275/event1
N: input/event1
S: char/13:65
S: input/by-id/usb-Microsoft_Microsoft®_Digital_Media_oard_3000-event-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:1.4:1.1-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input275/event1
E: SUBSYSTEM=input
E: DEVNAME=input/event1
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft®_Digital_Media_oard_3000
E: ID_MODEL_ENC=Microsoft®\x20Digital\x20Media\x20oard\x203000
E: ID_MODEL_ID=0732
E: ID_REVISION=0200
E: ID_SERIAL=Microsoft_Microsoft®_Digital_Media_oard_3000
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.4:1.1
E: XKBMODEL=pc105
E: XKBLAYOUT=us,cz(qwerty)
E: MAJOR=13
E: MINOR=65
E: DEVLINKS=/dev/char/13:65 /dev/input/by-id/usb-Microsoft_Microsoft®_Digital_Media_oard_3000-event-kbd /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.4:1.1-event-kbd
E: XKBOPTIONS=ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle
E: x11_options:xkb_layout=us,cz(qwerty)
E: x11_options:xkb_options=ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle

P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input278/event2
N: input/event2
S: input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.0-wacom
S: input/tablet-bamboo
S: input/wacom
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input278/event2
E: SUBSYSTEM=input
E: DEVNAME=input/event2
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_VENDOR=Wacom_Co._Ltd.
E: ID_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_VENDOR_ID=056a
E: ID_MODEL=MTE-450
E: ID_MODEL_ENC=MTE-450
E: ID_MODEL_ID=0065
E: ID_REVISION=0116
E: ID_SERIAL=Wacom_Co._Ltd._MTE-450
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=wacom
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.3:1.0
E: WACOM_TYPE=stylus
E: MAJOR=13
E: MINOR=66
E: DEVLINKS=/dev/input/by-path/pci-0000:00:1d.0-usb-0:1.3:1.0-wacom /dev/input/tablet-bamboo /dev/input/wacom

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input279/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input279/event3
E: SUBSYSTEM=input
E: DEVNAME=input/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=us,cz(qwerty)
E: MAJOR=13
E: MINOR=67
E: DEVLINKS=/dev/char/13:67
E: XKBOPTIONS=ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle
E: DMI_VENDOR=System manufacturer
E: x11_options:xkb_layout=us,cz(qwerty)
E: x11_options:xkb_options=ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input280/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input280/event4
E: SUBSYSTEM=input
E: DEVNAME=input/event4
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=us,cz(qwerty)
E: MAJOR=13
E: MINOR=68
E: DEVLINKS=/dev/char/13:68
E: XKBOPTIONS=ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle
E: DMI_VENDOR=System manufacturer
E: x11_options:xkb_layout=us,cz(qwerty)
E: x11_options:xkb_options=ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle

P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input276/event5
N: input/event5
S: char/13:69
S: input/by-id/usb-0b38_USB-compliant_keyboard-event-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:1.2:1.0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input276/event5
E: SUBSYSTEM=input
E: DEVNAME=input/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=0b38
E: ID_VENDOR_ENC=0b38
E: ID_VENDOR_ID=0b38
E: ID_MODEL=USB-compliant_keyboard
E: ID_MODEL_ENC=USB-compliant\x20keyboard
E: ID_MODEL_ID=0003
E: ID_REVISION=0100
E: ID_SERIAL=0b38_USB-compliant_keyboard
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.2:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=us,cz(qwerty)
E: MAJOR=13
E: MINOR=69
E: DEVLINKS=/dev/char/13:69 /dev/input/by-id/usb-0b38_USB-compliant_keyboard-event-kbd /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.2:1.0-event-kbd
E: XKBOPTIONS=ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle
E: x11_options:xkb_layout=us,cz(qwerty)
E: x11_options:xkb_options=ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle

P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input277/event6
N: input/event6
S: char/13:70
S: input/by-id/usb-0b38_USB-compliant_keyboard-event-if01
S: input/by-path/pci-0000:00:1d.0-usb-0:1.2:1.1-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input277/event6
E: SUBSYSTEM=input
E: DEVNAME=input/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=0b38
E: ID_VENDOR_ENC=0b38
E: ID_VENDOR_ID=0b38
E: ID_MODEL=USB-compliant_keyboard
E: ID_MODEL_ENC=USB-compliant\x20keyboard
E: ID_MODEL_ID=0003
E: ID_REVISION=0100
E: ID_SERIAL=0b38_USB-compliant_keyboard
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.2:1.1
E: XKBMODEL=pc105
E: XKBLAYOUT=us,cz(qwerty)
E: MAJOR=13
E: MINOR=70
E: DEVLINKS=/dev/char/13:70 /dev/input/by-id/usb-0b38_USB-compliant_keyboard-event-if01 /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.2:1.1-event
E: XKBOPTIONS=ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle
E: x11_options:xkb_layout=us,cz(qwerty)
E: x11_options:xkb_options=ctrl:nocaps,altwin:alt_is_meta,group:shifts_toggle,level3:menu_switch,numpad:microsoft,grp_led:scroll,grp:shifts_toggle

DRM Information from dmesg:
[1158263.985227] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[1158264.010563] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[1158264.010577] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[1158264.020111] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[1158264.020117] [drm] radeon: cp idle (0x10000C03)
[1158264.020148] [drm] radeon: ring at 0x0000000010000000
[1158264.020189] [drm] ring test succeeded in 7 usecs
[1158264.020208] [drm] ib test succeeded in 0 usecs
[1169502.764609] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[1169502.802608] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[1169502.802622] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[1169502.812294] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[1169502.812301] [drm] radeon: cp idle (0x10000C03)
[1169502.812332] [drm] radeon: ring at 0x0000000010000000
[1169502.812380] [drm] ring test succeeded in 7 usecs
[1169502.812400] [drm] ib test succeeded in 0 usecs
[1218205.479993] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[1218205.506578] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[1218205.506593] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[1218205.516588] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[1218205.516595] [drm] radeon: cp idle (0x10000C03)
[1218205.516626] [drm] radeon: ring at 0x0000000010000000
[1218205.516669] [drm] ring test succeeded in 7 usecs
[1218205.516690] [drm] ib test succeeded in 0 usecs
[1230351.422542] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[1230351.454561] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[1230351.454576] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[1230351.464739] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[1230351.464746] [drm] radeon: cp idle (0x10000C03)
[1230351.464777] [drm] radeon: ring at 0x0000000010000000
[1230351.464821] [drm] ring test succeeded in 7 usecs
[1230351.464842] [drm] ib test succeeded in 0 usecs
[1237412.422480] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[1237412.446562] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[1237412.446576] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[1237412.457183] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[1237412.457190] [drm] radeon: cp idle (0x10000C03)
[1237412.457221] [drm] radeon: ring at 0x0000000010000000
[1237412.457251] [drm] ring test succeeded in 7 usecs
[1237412.457274] [drm] ib test succeeded in 0 usecs
[1245543.599743] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[1245543.626561] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[1245543.626576] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[1245543.637257] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[1245543.637264] [drm] radeon: cp idle (0x10000C03)
[1245543.637295] [drm] radeon: ring at 0x0000000010000000
[1245543.637325] [drm] ring test succeeded in 7 usecs
[1245543.637347] [drm] ib test succeeded in 0 usecs
[1261371.855393] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[1261371.890571] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[1261371.890585] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[1261371.901835] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[1261371.901843] [drm] radeon: cp idle (0x10000C03)
[1261371.901874] [drm] radeon: ring at 0x0000000010000000
[1261371.901904] [drm] ring test succeeded in 7 usecs
[1261371.901926] [drm] ib test succeeded in 0 usecs
[1261980.278949] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[1261980.310572] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[1261980.310586] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[1261980.321676] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[1261980.321683] [drm] radeon: cp idle (0x10000C03)
[1261980.321714] [drm] radeon: ring at 0x0000000010000000
[1261980.321744] [drm] ring test succeeded in 7 usecs
[1261980.321766] [drm] ib test succeeded in 0 usecs
[1279498.427853] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[1279498.454563] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[1279498.454578] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[1279498.465877] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[1279498.465884] [drm] radeon: cp idle (0x10000C03)
[1279498.465916] [drm] radeon: ring at 0x0000000010000000
[1279498.465945] [drm] ring test succeeded in 7 usecs
[1279498.465968] [drm] ib test succeeded in 0 usecs
[1285142.079372] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[1285142.118556] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[1285142.118571] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[1285142.129887] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[1285142.129894] [drm] radeon: cp idle (0x10000C03)
[1285142.129925] [drm] radeon: ring at 0x0000000010000000
[1285142.129955] [drm] ring test succeeded in 7 usecs
[1285142.129978] [drm] ib test succeeded in 0 usecs
[1295860.791878] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[1295860.818576] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[1295860.818590] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[1295860.830049] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[1295860.830056] [drm] radeon: cp idle (0x10000C03)
[1295860.830087] [drm] radeon: ring at 0x0000000010000000
[1295860.830117] [drm] ring test succeeded in 7 usecs
[1295860.830138] [drm] ib test succeeded in 0 usecs
[1296099.607336] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[1296099.654563] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[1296099.654577] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[1296099.666662] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[1296099.666669] [drm] radeon: cp idle (0x10000C03)
[1296099.666700] [drm] radeon: ring at 0x0000000010000000
[1296099.666730] [drm] ring test succeeded in 7 usecs
[1296099.666751] [drm] ib test succeeded in 0 usecs


-- System Information:
Debian Release: 5.0.4
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'testing'), (300, 'unstable'), (295, 'experimental'), (290, 'stable-i386'), (280, 'testing-i386'), (270, 'unstable-i386'), (150, 'experimental-i386'), (70, 'oldstable'), (65, 'oldstable-i386')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.34-rc4-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages xserver-xorg-core depends on:
ii  keyboard-configuration        1.51       system-wide keyboard preferences
ii  libaudit0                     1.7.4-1    Dynamic library for security audit
ii  libc6                         2.11.1-3   Embedded GNU C Library: Shared lib
ii  libdrm2                       2.4.18-5   Userspace interface to kernel DRM 
ii  libgcrypt11                   1.4.5-2    LGPL Crypto library - runtime libr
ii  libpciaccess0                 0.11.0-2   Generic PCI access library for X
ii  libpixman-1-0                 0.16.4-1   pixel-manipulation library for X a
ii  libselinux1                   2.0.94-1   SELinux runtime shared libraries
ii  libudev0                      154-1      libudev shared library
ii  libxau6                       1:1.0.5-2  X11 authorisation library
ii  libxdmcp6                     1:1.0.2-3  X11 Display Manager Control Protoc
ii  libxfont1                     1:1.3.3-1  X11 font rasterisation library
ii  udev                          154-1      /dev/ and hotplug management daemo
ii  xserver-common                2:1.7.7-1  common files used by various X ser
ii  xserver-xorg                  1:7.5+6    the X.Org X server

Versions of packages xserver-xorg-core recommends:
ii  libgl1-mesa-dri               7.7.1-2    A free implementation of the OpenG

Versions of packages xserver-xorg-core suggests:
pn  xfonts-100dpi | xfonts-75dpi  <none>     (no description available)
pn  xfonts-scalable               <none>     (no description available)

-- debconf-show failed



Reply to: