Bug#579670: DVI monitor is blank
Package: xserver-xorg-video-nouveau
Version: 1:0.0.15+git20100329+7858345-3
Severity: important
Hi,
I tried the driver nouveau now that it is in unstable.
It works very well except for one think : the monitor connected on the
DVI port stays blank;
This monitor shows the normal boot until gdm is starting (and nouveau
kernel driver I guess).
This works perfectly with the good old nv driver.
What's strange is that it seems that the kernel detects a DisplayPort
port instead of a DVI port. BTW the name of the port is DP-1.
I use a laptop with an integrated nVidia card :
01:00.0 VGA compatible controller: nVidia Corporation G98M [Quadro NVS
160M] (rev a1)
It's in the NV50 series.
I use Debian's kernel image 2.6.32-4-686-bigmem version 2.6.32-11.
I didn't try newer kernel images or nouveau drivers. Please tell me if
this would be useful.
Should I also oopen a bug in nouveau's bugtracker ? I didn't find this
bug (except maybe bug 26797 :
https://bugs.freedesktop.org/show_bug.cgi?id=26797 ).
Thanks !
--
Julien
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 May 29 2009 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1712764 Mar 23 23:13 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: nVidia Corporation G98M [Quadro NVS
160M] (rev a1)
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 60 Apr 29 19:22 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "Device"
Identifier "n"
Driver "nouveau"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 33986 Jul 7 2009 /var/log/Xorg.20.log
-rw-r--r-- 1 root root 31713 Apr 29 19:44 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux p-lzz95dhb 2.6.32-4-686-bigmem #1 SMP
Tue Apr 6 07:42:27 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-4-686-bigmem
root=UUID=51f705cf-21a5-4126-a56f-843ace9c62c1 ro quiet
Build Date: 23 March 2010 10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 29 19:40:15 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "n"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81e7be0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:06eb:1028:0233 nVidia Corporation G98M
[Quadro NVS 160M] rev 161, Mem @ 0xf5000000/16777216,
0xe0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000df00/128, BIOS
@ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nouveau"
(II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.0.15
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU driver Date: Tue Mar 16 13:08:37 2010 +1000
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) Primary Device is: PCI 01@00:00:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] nouveau interface version: 0.0.15
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(--) NOUVEAU(0): Chipset: "NVIDIA NV98"
(II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(==) NOUVEAU(0): Using HW cursor
(II) NOUVEAU(0): Output LVDS-1 has no monitor section
(II) NOUVEAU(0): Output VGA-1 has no monitor section
(II) NOUVEAU(0): Output DP-1 has no monitor section
(II) NOUVEAU(0): Output DP-2 has no monitor section
(II) NOUVEAU(0): EDID for output LVDS-1
(II) NOUVEAU(0): Manufacturer: SEC Model: 5442 Serial#: 0
(II) NOUVEAU(0): Year: 2008 Week: 0
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Digital Display Input
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 30 vert.: 19
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): No DPMS capabilities specified
(II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) NOUVEAU(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 107.8 MHz Image Size: 303 x 190 mm
(II) NOUVEAU(0): h_active: 1440 h_sync: 1486 h_sync_end 1556
h_blank_end 1928 h_border: 0
(II) NOUVEAU(0): v_active: 900 v_sync: 909 v_sync_end 918
v_blanking: 932 v_border: 0
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 71.9 MHz Image Size: 303 x 190 mm
(II) NOUVEAU(0): h_active: 1440 h_sync: 1486 h_sync_end 1556
h_blank_end 1928 h_border: 0
(II) NOUVEAU(0): v_active: 900 v_sync: 909 v_sync_end 918
v_blanking: 932 v_border: 0
(II) NOUVEAU(0): TT219�141BT
(II) NOUVEAU(0): Unknown vendor-specific block 0
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004ca3425400000000
(II) NOUVEAU(0): 00120103901e13780a87f594574f8c27
(II) NOUVEAU(0): 27505400000001010101010101010101
(II) NOUVEAU(0): 0101010101011d2aa0e8518420302e46
(II) NOUVEAU(0): 99002fbe1000001a141ca0e851842030
(II) NOUVEAU(0): 2e4699002fbe1000001a000000fe0054
(II) NOUVEAU(0): 543231398131343142540a2000000000
(II) NOUVEAU(0): 000c10171b3669a9ff02010a202000d0
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(II) NOUVEAU(0): Printing probed modes for output LVDS-1
(II) NOUVEAU(0): Modeline "1440x900"x60.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x40.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520
864 867 871 897 -hsync +vsync (53.8 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328
768 771 775 798 -hsync +vsync (47.8 kHz)
(II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024
600 603 607 624 -hsync +vsync (37.4 kHz)
(II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480
483 487 500 -hsync +vsync (29.7 kHz)
(II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400
403 413 417 -hsync +vsync (24.8 kHz)
(II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400
403 409 417 -hsync +vsync (25.0 kHz)
(II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350
353 363 366 -hsync +vsync (21.9 kHz)
(II) NOUVEAU(0): EDID for output VGA-1
(II) NOUVEAU(0): EDID for output DP-1
(II) NOUVEAU(0): EDID for output DP-2
(II) NOUVEAU(0): Output LVDS-1 connected
(II) NOUVEAU(0): Output VGA-1 disconnected
(II) NOUVEAU(0): Output DP-1 disconnected
(II) NOUVEAU(0): Output DP-2 disconnected
(II) NOUVEAU(0): Using exact sizes for initial modes
(II) NOUVEAU(0): Output LVDS-1 using initial mode 1440x900
(II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(--) NOUVEAU(0): Virtual size is 1440x900 (pitch 1440)
(**) NOUVEAU(0): Driver mode "1440x900": 107.8 MHz (scaled from 0.0
MHz), 55.9 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1440x900"x60.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(**) NOUVEAU(0): Driver mode "1440x900": 71.9 MHz (scaled from 0.0
MHz), 37.3 kHz, 40.0 Hz
(II) NOUVEAU(0): Modeline "1440x900"x40.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(**) NOUVEAU(0): Driver mode "1152x864": 81.8 MHz (scaled from 0.0
MHz), 53.8 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520
864 867 871 897 -hsync +vsync (53.8 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0
MHz), 47.8 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328
768 771 775 798 -hsync +vsync (47.8 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0
MHz), 37.4 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024
600 603 607 624 -hsync +vsync (37.4 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0
MHz), 29.7 kHz, 59.4 Hz
(II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480
483 487 500 -hsync +vsync (29.7 kHz)
(**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0
MHz), 24.8 kHz, 59.6 Hz
(II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400
403 413 417 -hsync +vsync (24.8 kHz)
(**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0
MHz), 25.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400
403 409 417 -hsync +vsync (25.0 kHz)
(**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0
MHz), 21.9 kHz, 59.8 Hz
(II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350
353 363 366 -hsync +vsync (21.9 kHz)
(**) NOUVEAU(0): Display dimensions: (300, 190) mm
(**) NOUVEAU(0): DPI set to (121, 120)
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) Depth 24 pixmap format is 32 bpp
(II) NOUVEAU(0): Opened GPU channel 2
(II) NOUVEAU(0): [DRI2] Setup complete
(II) NOUVEAU(0): GART: 512MiB available
(II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
(II) NOUVEAU(0): [XvMC] Extension initialized.
(II) NOUVEAU(0): NVEnterVT is called.
(==) NOUVEAU(0): DPMS enabled
(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(EE) AIGLX error: dlopen of /usr/lib/dri/nouveau_dri.so failed
(/usr/lib/dri/nouveau_dri.so: cannot open shared object file: No such
file or directory)
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NOUVEAU(0): Setting screen physical size to 380 x 238
resize called 1440 900
(II) config/udev: Adding input device "Video Bus" (/dev/input/event4)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event4"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Power Button" (/dev/input/event2)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event2"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event3)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event3"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Laptop_Integrated_Webcam_0.3M"
(/dev/input/event8)
(**) "Laptop_Integrated_Webcam_0.3M": always reports core events
(**) "Laptop_Integrated_Webcam_0.3M": Device: "/dev/input/event8"
(II) "Laptop_Integrated_Webcam_0.3M": Found keys
(II) "Laptop_Integrated_Webcam_0.3M": Configuring as keyboard
(II) XINPUT: Adding extended input device
""Laptop_Integrated_Webcam_0.3M"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard"
(/dev/input/event0)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event0"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2
keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "DualPoint Stick" (/dev/input/event6)
(**) "DualPoint Stick": always reports core events
(**) "DualPoint Stick": Device: "/dev/input/event6"
(II) "DualPoint Stick": Found 3 mouse buttons
(II) "DualPoint Stick": Found relative axes
(II) "DualPoint Stick": Found x and y relative axes
(II) "DualPoint Stick": Configuring as mouse
(**) "DualPoint Stick": YAxisMapping: buttons 4 and 5
(**) "DualPoint Stick": EmulateWheelButton: 4, EmulateWheelInertia:
10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""DualPoint Stick"" (type: MOUSE)
(**) "DualPoint Stick": (accel) keeping acceleration scheme 1
(**) "DualPoint Stick": (accel) acceleration profile 0
(II) "DualPoint Stick": initialized for relative axes.
(II) config/udev: Adding input device "AlpsPS/2 ALPS DualPoint
TouchPad" (/dev/input/event7)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event7"
(II) "AlpsPS/2 ALPS DualPoint TouchPad": x-axis range 0 - 1023
(II) "AlpsPS/2 ALPS DualPoint TouchPad": y-axis range 0 - 767
(II) "AlpsPS/2 ALPS DualPoint TouchPad": pressure range 0 - 127
(II) "AlpsPS/2 ALPS DualPoint TouchPad": finger width range 0 - 0
(II) "AlpsPS/2 ALPS DualPoint TouchPad": buttons: left right middle
(--) "AlpsPS/2 ALPS DualPoint TouchPad": touchpad found
(**) "AlpsPS/2 ALPS DualPoint TouchPad": always reports core events
(II) XINPUT: Adding extended input device ""AlpsPS/2 ALPS DualPoint
TouchPad"" (type: TOUCHPAD)
(**) "AlpsPS/2 ALPS DualPoint TouchPad": (accel) keeping acceleration scheme 1
(**) "AlpsPS/2 ALPS DualPoint TouchPad": (accel) acceleration profile 0
(--) "AlpsPS/2 ALPS DualPoint TouchPad": touchpad found
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
resize called 2720 1024
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
resize called 1440 900
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(II) config/udev: Adding input device "Logitech USB-PS/2 Optical
Mouse" (/dev/input/event14)
(**) "Logitech USB-PS/2 Optical Mouse": always reports core events
(**) "Logitech USB-PS/2 Optical Mouse": Device: "/dev/input/event14"
(II) "Logitech USB-PS/2 Optical Mouse": Found 12 mouse buttons
(II) "Logitech USB-PS/2 Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB-PS/2 Optical Mouse": Found relative axes
(II) "Logitech USB-PS/2 Optical Mouse": Found x and y relative axes
(II) "Logitech USB-PS/2 Optical Mouse": Configuring as mouse
(**) "Logitech USB-PS/2 Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB-PS/2 Optical Mouse": EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB-PS/2 Optical
Mouse"" (type: MOUSE)
(**) "Logitech USB-PS/2 Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB-PS/2 Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB-PS/2 Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Dell Dell USB Keyboard"
(/dev/input/event16)
(**) "Dell Dell USB Keyboard": always reports core events
(**) "Dell Dell USB Keyboard": Device: "/dev/input/event16"
(II) "Dell Dell USB Keyboard": Found absolute axes
(II) "Dell Dell USB Keyboard": Found keys
(II) "Dell Dell USB Keyboard": Configuring as mouse
(II) "Dell Dell USB Keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Dell Dell USB Keyboard""
(type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) "Dell Dell USB Keyboard": (accel) keeping acceleration scheme 1
(**) "Dell Dell USB Keyboard": (accel) acceleration profile 0
(II) "Dell Dell USB Keyboard": initialized for absolute axes.
(II) config/udev: Adding input device "Dell Dell USB Keyboard"
(/dev/input/event15)
(**) "Dell Dell USB Keyboard": always reports core events
(**) "Dell Dell USB Keyboard": Device: "/dev/input/event15"
(II) "Dell Dell USB Keyboard": Found keys
(II) "Dell Dell USB Keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Dell Dell USB Keyboard""
(type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
resize called 2720 1024
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
resize called 1280 1024
(II) NOUVEAU(0): EDID vendor "PHL", prod id 2077
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688
1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600
601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600
601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480
481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480
489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480
483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480
490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400
412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688
1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312
768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328
768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344
768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624
625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600
601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600
637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600
864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536
864 865 868 900 -hsync +vsync (63.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800
960 961 964 1000 +hsync +vsync (60.0 kHz)
resize called 2720 1024
(II) NOUVEAU(0): EDID vendor "PHL", prod id 2077
(II) NOUVEAU(0): Using hsync ranges from config file
(II) NOUVEAU(0): Using vrefresh ranges from config file
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688
1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600
601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600
601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480
481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480
489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480
483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480
490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400
412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688
1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312
768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328
768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344
768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624
625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600
601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600
637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600
864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536
864 865 868 900 -hsync +vsync (63.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800
960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): EDID vendor "SEC", prod id 21570
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0 107.81 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 71.88 1440 1486 1556 1928
900 909 918 932 +hsync -vsync (37.3 kHz)
resize called 1280 1024
udev information:
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=fr
E: XKBVARIANT=latin9
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1
N: input/event1
S: char/13:65
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:65
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event10
N: input/event10
S: char/13:74
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ACL_MANAGE=1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:74
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
N: input/event11
S: char/13:75
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
E: MAJOR=13
E: MINOR=75
E: DEVNAME=/dev/input/event11
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ACL_MANAGE=1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:75
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
N: input/event12
S: char/13:76
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
E: MAJOR=13
E: MINOR=76
E: DEVNAME=/dev/input/event12
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ACL_MANAGE=1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:76
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
N: input/event13
S: char/13:77
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
E: MAJOR=13
E: MINOR=77
E: DEVNAME=/dev/input/event13
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: ACL_MANAGE=1
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:77
P: /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/input/input14/event14
N: input/event14
S: char/13:78
S: input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-event-mouse
S: input/by-path/pci-0000:00:1a.7-usb-0:4.1.1:1.0-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/input/input14/event14
E: MAJOR=13
E: MINOR=78
E: DEVNAME=/dev/input/event14
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB-PS_2_Optical_Mouse
E: ID_MODEL_ENC=USB-PS\x2f2\x20Optical\x20Mouse
E: ID_MODEL_ID=c043
E: ID_REVISION=2720
E: ID_SERIAL=Logitech_USB-PS_2_Optical_Mouse
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.7-usb-0:4.1.1:1.0
E: x11_driver=evdev
E: DEVLINKS=/dev/char/13:78
/dev/input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-event-mouse
/dev/input/by-path/pci-0000:00:1a.7-usb-0:4.1.1:1.0-event-mouse
P: /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2.1/1-4.1.2.1:1.0/input/input15/event15
N: input/event15
S: char/13:79
S: input/by-id/usb-Dell_Dell_USB_Keyboard-event-kbd
S: input/by-path/pci-0000:00:1a.7-usb-0:4.1.2.1:1.0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2.1/1-4.1.2.1:1.0/input/input15/event15
E: MAJOR=13
E: MINOR=79
E: DEVNAME=/dev/input/event15
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=Dell
E: ID_VENDOR_ENC=Dell
E: ID_VENDOR_ID=413c
E: ID_MODEL=Dell_USB_Keyboard
E: ID_MODEL_ENC=Dell\x20USB\x20Keyboard
E: ID_MODEL_ID=2010
E: ID_REVISION=0200
E: ID_SERIAL=Dell_Dell_USB_Keyboard
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.7-usb-0:4.1.2.1:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=fr
E: XKBVARIANT=latin9
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DEVLINKS=/dev/char/13:79
/dev/input/by-id/usb-Dell_Dell_USB_Keyboard-event-kbd
/dev/input/by-path/pci-0000:00:1a.7-usb-0:4.1.2.1:1.0-event-kbd
P: /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2.1/1-4.1.2.1:1.1/input/input16/event16
N: input/event16
S: char/13:80
S: input/by-id/usb-Dell_Dell_USB_Keyboard-event-if01
S: input/by-path/pci-0000:00:1a.7-usb-0:4.1.2.1:1.1-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2.1/1-4.1.2.1:1.1/input/input16/event16
E: MAJOR=13
E: MINOR=80
E: DEVNAME=/dev/input/event16
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Dell
E: ID_VENDOR_ENC=Dell
E: ID_VENDOR_ID=413c
E: ID_MODEL=Dell_USB_Keyboard
E: ID_MODEL_ENC=Dell\x20USB\x20Keyboard
E: ID_MODEL_ID=2010
E: ID_REVISION=0200
E: ID_SERIAL=Dell_Dell_USB_Keyboard
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.7-usb-0:4.1.2.1:1.1
E: XKBMODEL=pc105
E: XKBLAYOUT=fr
E: XKBVARIANT=latin9
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DEVLINKS=/dev/char/13:80
/dev/input/by-id/usb-Dell_Dell_USB_Keyboard-event-if01
/dev/input/by-path/pci-0000:00:1a.7-usb-0:4.1.2.1:1.1-event
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=fr
E: XKBVARIANT=latin9
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:66
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=fr
E: XKBVARIANT=latin9
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:67
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:35/LNXVIDEO:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:35/LNXVIDEO:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=fr
E: XKBVARIANT=latin9
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:68
P: /devices/platform/pcspkr/input/input5/event5
N: input/event5
S: char/13:69
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:69 /dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/platform/i8042/serio1/input/input6/event6
N: input/event6
S: char/13:70
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: x11_driver=evdev
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:70
/dev/input/by-path/platform-i8042-serio-1-event-mouse
P: /devices/platform/i8042/serio1/input/input7/event7
N: input/event7
S: char/13:71
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: x11_driver=synaptics
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:71
/dev/input/by-path/platform-i8042-serio-1-event-mouse
P: /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input8/event8
N: input/event8
S: char/13:72
S: input/by-id/usb-CN0TX593724879320BTX_Laptop_Integrated_Webcam_0.3M-event-if00
S: input/by-path/pci-0000:00:1a.7-usb-0:6:1.0-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=CN0TX593724879320BTX
E: ID_VENDOR_ENC=CN0TX593724879320BTX
E: ID_VENDOR_ID=0c45
E: ID_MODEL=Laptop_Integrated_Webcam_0.3M
E: ID_MODEL_ENC=Laptop_Integrated_Webcam_0.3M
E: ID_MODEL_ID=63f8
E: ID_REVISION=8806
E: ID_SERIAL=CN0TX593724879320BTX_Laptop_Integrated_Webcam_0.3M
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1a.7-usb-0:6:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=fr
E: XKBVARIANT=latin9
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DEVLINKS=/dev/char/13:72
/dev/input/by-id/usb-CN0TX593724879320BTX_Laptop_Integrated_Webcam_0.3M-event-if00
/dev/input/by-path/pci-0000:00:1a.7-usb-0:6:1.0-event
P: /devices/pci0000:00/0000:00:1b.0/input/input9/event9
N: input/event9
S: char/13:73
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=Dell Inc.
E: DEVLINKS=/dev/char/13:73
DRM Information from dmesg:
[ 0.393026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 1.092423] Linux agpgart interface v0.103
[ 40.657648] [drm] Initialized drm 1.1.0 20060810
[ 41.093029] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
[ 41.093384] [drm] nouveau 0000:01:00.0: Detected an NV50 generation
card (0x298580a2)
[ 41.094417] [drm] nouveau 0000:01:00.0: Attempting to load BIOS
image from PRAMIN
[ 41.199384] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 41.199388] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 41.199390] [drm] nouveau 0000:01:00.0: Bios version 62.98.3c.00
[ 41.199393] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not
currently supported
[ 41.199395] [drm] nouveau 0000:01:00.0: Found Display Configuration
Block version 4.0
[ 41.199398] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 41.199400] [drm] nouveau 0000:01:00.0: 0: 0x00000041: type 0x41
idx 0 tag 0xff
[ 41.199403] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00
idx 1 tag 0xff
[ 41.199405] [drm] nouveau 0000:01:00.0: 2: 0x00005246: type 0x46
idx 2 tag 0x07
[ 41.199407] [drm] nouveau 0000:01:00.0: 3: 0x0000a346: type 0x46
idx 3 tag 0x08
[ 41.199409] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
[ 41.199412] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
[ 41.199414] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022386 0f200010
[ 41.199416] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02022332 00020010
[ 41.199418] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 040333a6 0f200010
[ 41.199419] [drm] nouveau 0000:01:00.0: Raw DCB entry 5: 04033312 00020010
[ 41.199421] [drm] nouveau 0000:01:00.0: Raw DCB entry 6: 0000000e 00000000
[ 41.199438] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0
at offset 0xD601
[ 41.252165] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1
at offset 0xD9B3
[ 41.273091] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2
at offset 0xE259
[ 41.273119] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3
at offset 0xE34B
[ 41.280189] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4
at offset 0xE557
[ 41.280206] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at
offset 0xE5BC
[ 41.304078] [drm] nouveau 0000:01:00.0: 0xE5BC: Condition still not
met after 20ms, skipping following opcodes
[ 41.304107] [drm] nouveau 0000:01:00.0: 0xC1AA: parsing output script 0
[ 41.304115] [drm] nouveau 0000:01:00.0: 0xC7DC: parsing output script 0
[ 41.304122] [drm] nouveau 0000:01:00.0: 0xC5CE: parsing output script 0
[ 41.304141] [drm] nouveau 0000:01:00.0: 0xC7DC: parsing output script 0
[ 41.304148] [drm] nouveau 0000:01:00.0: 0xC5CE: parsing output script 0
[ 41.477247] [drm] nouveau 0000:01:00.0: 256 MiB VRAM
[ 41.534084] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 41.534666] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 41.547594] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc:
initialised FIFO 1
[ 41.549261] [drm] nouveau 0000:01:00.0: Detected a LVDS output
[ 41.549282] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 41.549287] [drm] nouveau 0000:01:00.0: Detected a DP output
[ 41.549293] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 41.549298] [drm] nouveau 0000:01:00.0: Detected a DP output
[ 41.549303] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 41.549310] [drm] nouveau 0000:01:00.0: Detected a LVDS connector
[ 41.664553] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 41.664739] [drm] nouveau 0000:01:00.0: Detected a DisplayPort connector
[ 41.664802] [drm] nouveau 0000:01:00.0: Detected a DisplayPort connector
[ 42.791416] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb:
0x40250000, bo f68e6c00
[ 42.791748] [drm] Initialized nouveau 0.0.15 20090420 for
0000:01:00.0 on minor 0
[ 43.226970] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 43.239896] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc:
initialised FIFO 2
[ 43.275949] [drm] nouveau 0000:01:00.0: 0xC1AE: parsing output script 1
[ 43.276033] [drm] nouveau 0000:01:00.0: 0xC065: parsing clock script 0
[ 43.531587] [drm] nouveau 0000:01:00.0: 0xC1A5: parsing clock script 1
[ 88.951380] [drm] nouveau 0000:01:00.0: 0x1203: parsing clock script 0
[ 179.626582] [drm] nouveau 0000:01:00.0: plugged DisplayPort-1
[ 208.373424] [drm] nouveau 0000:01:00.0: unplugged DisplayPort-1
[ 208.386378] [drm] nouveau 0000:01:00.0: plugged DisplayPort-1
[ 208.387077] [drm] nouveau 0000:01:00.0: plugged DisplayPort-1
[ 208.387751] [drm] nouveau 0000:01:00.0: unplugged DisplayPort-1
[ 208.388101] [drm] nouveau 0000:01:00.0: plugged DisplayPort-1
[ 208.392371] [drm] nouveau 0000:01:00.0: unplugged DisplayPort-1
[ 208.392401] [drm] nouveau 0000:01:00.0: plugged DisplayPort-1
[ 208.399908] [drm] nouveau 0000:01:00.0: unplugged DisplayPort-1
[ 208.400291] [drm] nouveau 0000:01:00.0: plugged DisplayPort-1
[ 208.558692] [drm] nouveau 0000:01:00.0: unplugged DisplayPort-1
[ 234.089962] [drm] nouveau 0000:01:00.0: 0x1203: parsing clock script 0
[ 243.263245] [drm] nouveau 0000:01:00.0: 0xC1AE: parsing output script 1
[ 244.320836] [drm] nouveau 0000:01:00.0: 0xC065: parsing clock script 0
[ 244.578802] [drm] nouveau 0000:01:00.0: 0xC1A5: parsing clock script 1
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-4-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg-video-nouveau depends on:
ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib
ii libdrm-nouveau1 2.4.18-5 Userspace interface to nouveau-spe
ii xserver-xorg-core 2:1.7.6-1 Xorg X server - core server
xserver-xorg-video-nouveau recommends no packages.
xserver-xorg-video-nouveau suggests no packages.
-- no debconf information
-- full dmesg output from boot
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-4-686-bigmem (Debian 2.6.32-11)
(maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Tue Apr
6 07:42:27 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000df44d400 (usable)
[ 0.000000] BIOS-e820: 00000000df44f400 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100002000 - 0000000120000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037600000 page 2M
[ 0.000000] 0037600000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-e000
[ 0.000000] RAMDISK: 3775a000 - 37fef0e4
[ 0.000000] Allocated new RAMDISK: 00100000 - 009950e4
[ 0.000000] Move RAMDISK from 000000003775a000 - 0000000037fef0e3
to 00100000 - 009950e3
[ 0.000000] ACPI: RSDP 000fb9c0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT df451e00 0006C (v01 DELL M09 27D90A1E
ASL 00000061)
[ 0.000000] ACPI: FACP df451c9c 000F4 (v04 DELL M09 27D90A1E
ASL 00000061)
[ 0.000000] ACPI: DSDT df452400 06E14 (v02 INT430 SYSFexxx 00001001
INTL 20050624)
[ 0.000000] ACPI: FACS df460c00 00040
[ 0.000000] ACPI: HPET df451f00 00038 (v01 DELL M09 00000001
ASL 00000061)
[ 0.000000] ACPI: DMAR df460400 000B0 (v01 DELL M09 27D90A1E
ASL 00000061)
[ 0.000000] ACPI: APIC df452000 00068 (v01 DELL M09 27D90A1E
ASL 00000047)
[ 0.000000] ACPI: ASF! df451c00 0006A (v32 DELL M09 27D90A1E
ASL 00000061)
[ 0.000000] ACPI: MCFG df451fc0 0003E (v16 DELL M09 27D90A1E
ASL 00000061)
[ 0.000000] ACPI: TCPA df452300 00032 (v01 00000000
ASL 00000000)
[ 0.000000] ACPI: SLIC df45209c 00176 (v01 DELL M09 27D90A1E
ASL 00000061)
[ 0.000000] ACPI: SSDT df45032d 0066C (v01 PmRef CpuPm 00003000
INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3720MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 0000b000 - 00011f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014f1d14] TEXT DATA BSS ==>
[0001000000 - 00014f1d14]
[ 0.000000] #4 [000009bc00 - 0000100000] BIOS reserved ==>
[000009bc00 - 0000100000]
[ 0.000000] #5 [00014f2000 - 00014ff198] BRK ==>
[00014f2000 - 00014ff198]
[ 0.000000] #6 [0000007000 - 000000b000] PGTABLE ==>
[0000007000 - 000000b000]
[ 0.000000] #7 [0000100000 - 00009950e4] NEW RAMDISK ==>
[0000100000 - 00009950e4]
[ 0.000000] #8 [000000b000 - 0000012000] BOOTMAP ==>
[000000b000 - 0000012000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000df44d
[ 0.000000] 0: 0x00100002 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1045478
[ 0.000000] free_area_init_node: node 0, pgdat c13c9900,
node_mem_map c1501000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7441 pages used for memmap
[ 0.000000] HighMem zone: 810812 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap:
e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c3a00000 s37432 r0 d24008 u1048576
[ 0.000000] pcpu-alloc: s37432 r0 d24008 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1036261
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-4-686-bigmem
root=UUID=51f705cf-21a5-4126-a56f-843ace9c62c1 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (000377fe:00120000)
[ 0.000000] Memory: 4129168k/4718592k available (2538k kernel code,
51804k reserved, 1379k data, 384k init, 3273012k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13d4000 - 0xc1434000 ( 384 kB)
[ 0.000000] .data : 0xc127a901 - 0xc13d35a8 (1379 kB)
[ 0.000000] .text : 0xc1000000 - 0xc127a901 (2538 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2393.811 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated
using timer frequency.. 4787.62 BogoMIPS (lpj=9575244)
[ 0.004016] Security Framework initialized
[ 0.004020] SELinux: Disabled at boot.
[ 0.004025] Mount-cache hash table entries: 512
[ 0.004122] Initializing cgroup subsys ns
[ 0.004125] Initializing cgroup subsys cpuacct
[ 0.004128] Initializing cgroup subsys devices
[ 0.004130] Initializing cgroup subsys freezer
[ 0.004131] Initializing cgroup subsys net_cls
[ 0.004148] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004150] CPU: L2 cache: 3072K
[ 0.004152] CPU: Physical Processor ID: 0
[ 0.004154] CPU: Processor Core ID: 0
[ 0.008006] mce: CPU supports 6 MCE banks
[ 0.008012] CPU0: Thermal monitoring enabled (TM2)
[ 0.008015] using mwait in idle threads.
[ 0.008020] Performance Events: Core2 events, Intel PMU driver.
[ 0.008025] ... version: 2
[ 0.008026] ... bit width: 40
[ 0.008027] ... generic registers: 2
[ 0.008028] ... value mask: 000000ffffffffff
[ 0.008030] ... max period: 000000007fffffff
[ 0.008031] ... fixed-purpose events: 3
[ 0.008033] ... event mask: 0000000700000003
[ 0.008037] Checking 'hlt' instruction... OK.
[ 0.025027] ACPI: Core revision 20090903
[ 0.036042] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036391] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076141] CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.164064] CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a
[ 0.164072] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168039] Brought up 2 CPUs
[ 0.168042] Total of 2 processors activated (9575.58 BogoMIPS).
[ 0.168564] CPU0 attaching sched-domain:
[ 0.168567] domain 0: span 0-1 level MC
[ 0.168569] groups: 0 1
[ 0.168573] CPU1 attaching sched-domain:
[ 0.168575] domain 0: span 0-1 level MC
[ 0.168576] groups: 1 0
[ 0.168642] devtmpfs: initialized
[ 0.168642] regulator: core version 0.5
[ 0.168642] NET: Registered protocol family 16
[ 0.168642] ACPI: bus type pci registered
[ 0.168642] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.168642] PCI: MCFG area at f8000000 reserved in E820
[ 0.168642] PCI: Using MMCONFIG for extended config space
[ 0.168642] PCI: Using configuration type 1 for base access
[ 0.168642] bio: create slab <bio-0> at 0
[ 0.168642] ACPI: EC: Look up EC in DSDT
[ 0.168764] ACPI: BIOS _OSI(Linux) query ignored
[ 0.236158] ACPI: Interpreter enabled
[ 0.236164] ACPI: (supports S0 S3 S4 S5)
[ 0.236179] ACPI: Using IOAPIC for interrupt routing
[ 0.348280] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
[ 0.356095] ACPI: No dock devices found.
[ 0.374730] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.374773] DMAR: Forcing write-buffer flush capability
[ 0.374819] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.374822] pci 0000:00:01.0: PME# disabled
[ 0.374906] pci 0000:00:19.0: reg 10 32bit mmio: [0xf6fe0000-0xf6ffffff]
[ 0.374914] pci 0000:00:19.0: reg 14 32bit mmio: [0xf6fdb000-0xf6fdbfff]
[ 0.374921] pci 0000:00:19.0: reg 18 io port: [0xefe0-0xefff]
[ 0.374973] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.374978] pci 0000:00:19.0: PME# disabled
[ 0.375040] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[ 0.375126] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[ 0.375212] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[ 0.375298] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
[ 0.375362] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.375367] pci 0000:00:1a.7: PME# disabled
[ 0.375418] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6fdc000-0xf6fdffff]
[ 0.375474] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.375478] pci 0000:00:1b.0: PME# disabled
[ 0.375564] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.375568] pci 0000:00:1c.0: PME# disabled
[ 0.375658] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.375662] pci 0000:00:1c.1: PME# disabled
[ 0.375750] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.375754] pci 0000:00:1c.2: PME# disabled
[ 0.375842] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.375846] pci 0000:00:1c.3: PME# disabled
[ 0.375918] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[ 0.376014] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[ 0.376101] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[ 0.376189] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
[ 0.376253] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.376258] pci 0000:00:1d.7: PME# disabled
[ 0.376500] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[ 0.376507] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[ 0.376514] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[ 0.376521] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[ 0.376528] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
[ 0.376536] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-0xfed1cfff]
[ 0.376580] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.376584] pci 0000:00:1f.2: PME# disabled
[ 0.376622] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6fdaf00-0xf6fdafff]
[ 0.376639] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.376720] pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff]
[ 0.376735] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.376749] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff]
[ 0.376758] pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
[ 0.376766] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.384104] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.384107] pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff]
[ 0.384111] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.384260] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf1ffe000-0xf1ffffff]
[ 0.384372] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.384380] pci 0000:0c:00.0: PME# disabled
[ 0.392129] pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff]
[ 0.392252] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
[ 0.392256] pci 0000:00:1c.3: bridge 32bit mmio: [0xf1c00000-0xf1efffff]
[ 0.392264] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
[ 0.392305] pci 0000:03:01.0: reg 10 32bit mmio: [0xf1bff800-0xf1bfffff]
[ 0.392360] pci 0000:03:01.0: supports D1 D2
[ 0.392362] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.392366] pci 0000:03:01.0: PME# disabled
[ 0.392406] pci 0000:03:01.1: reg 10 32bit mmio: [0xf1bff600-0xf1bff6ff]
[ 0.392461] pci 0000:03:01.1: supports D1 D2
[ 0.392463] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.392467] pci 0000:03:01.1: PME# disabled
[ 0.392507] pci 0000:03:01.2: reg 10 32bit mmio: [0xf1bff700-0xf1bff7ff]
[ 0.392561] pci 0000:03:01.2: supports D1 D2
[ 0.392562] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.392567] pci 0000:03:01.2: PME# disabled
[ 0.392641] pci 0000:00:1e.0: transparent bridge
[ 0.392648] pci 0000:00:1e.0: bridge 32bit mmio: [0xf1b00000-0xf1bfffff]
[ 0.392685] pci_bus 0000:00: on NUMA node 0
[ 0.392688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.392923] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.393026] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.393079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.393139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.393197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.393255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.404369] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3
[ 0.404468] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.404565] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
[ 0.404661] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
[ 0.404757] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.404859] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.404958] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.405046] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 0.405144] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.405147] vgaarb: loaded
[ 0.405167] PCI: Using ACPI for IRQ routing
[ 0.405167] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.405167] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.408007] Switching to clocksource tsc
[ 0.409037] pnp: PnP ACPI init
[ 0.409043] ACPI: bus type pnp registered
[ 0.487870] pnp: PnP ACPI: found 14 devices
[ 0.487872] ACPI: ACPI bus type pnp unregistered
[ 0.487874] PnPBIOS: Disabled by ACPI PNP
[ 0.487883] system 00:05: ioport range 0xc80-0xcaf has been reserved
[ 0.487886] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[ 0.487891] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.487896] system 00:0a: ioport range 0xcb0-0xcbb has been reserved
[ 0.487899] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.487904] system 00:0b: ioport range 0x900-0x92f has been reserved
[ 0.487908] system 00:0b: ioport range 0x931-0x933 has been reserved
[ 0.487910] system 00:0b: ioport range 0x935-0x97f has been reserved
[ 0.487913] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.487915] system 00:0b: ioport range 0x1000-0x1005 has been reserved
[ 0.487918] system 00:0b: ioport range 0x1008-0x100f has been reserved
[ 0.487922] system 00:0c: ioport range 0xf400-0xf4fe has been reserved
[ 0.487925] system 00:0c: ioport range 0x1006-0x1007 has been reserved
[ 0.487927] system 00:0c: ioport range 0x100a-0x1059 could not be reserved
[ 0.487930] system 00:0c: ioport range 0x1060-0x107f has been reserved
[ 0.487932] system 00:0c: ioport range 0x1080-0x10bf has been reserved
[ 0.487935] system 00:0c: ioport range 0x1100-0x111f has been reserved
[ 0.487939] system 00:0c: ioport range 0x1010-0x102f has been reserved
[ 0.487942] system 00:0c: ioport range 0x809-0x809 has been reserved
[ 0.487946] system 00:0d: iomem range 0x0-0x9efff could not be reserved
[ 0.487949] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
[ 0.487951] system 00:0d: iomem range 0xc0000-0xd3fff could not be reserved
[ 0.487954] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.487956] system 00:0d: iomem range 0x100000-0xdf44d3ff could not
be reserved
[ 0.487959] system 00:0d: iomem range 0xdf44d400-0xdfefffff could
not be reserved
[ 0.487962] system 00:0d: iomem range 0xdff00000-0xdfffffff has been reserved
[ 0.487964] system 00:0d: iomem range 0xffe00000-0xffffffff could
not be reserved
[ 0.487967] system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
[ 0.487969] system 00:0d: iomem range 0xfec00000-0xfec0ffff could
not be reserved
[ 0.487972] system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.487975] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.487977] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.487980] system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
[ 0.487982] system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
[ 0.487985] system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
[ 0.487987] system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 0.487990] system 00:0d: iomem range 0xfed1c800-0xfed1cfff has been reserved
[ 0.487992] system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
[ 0.487995] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.522695] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.522697] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.522701] pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff
[ 0.522704] pci 0000:00:01.0: PREFETCH window:
0x000000e0000000-0x000000efffffff
[ 0.522708] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 0.522711] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.522717] pci 0000:00:1c.0: MEM window: 0xf0200000-0xf03fffff
[ 0.522722] pci 0000:00:1c.0: PREFETCH window:
0x000000f0400000-0x000000f05fffff
[ 0.522729] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[ 0.522732] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.522738] pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff
[ 0.522743] pci 0000:00:1c.1: PREFETCH window:
0x000000f0600000-0x000000f07fffff
[ 0.522750] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d
[ 0.522753] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.522759] pci 0000:00:1c.2: MEM window: 0xf0800000-0xf09fffff
[ 0.522763] pci 0000:00:1c.2: PREFETCH window:
0x000000f0a00000-0x000000f0bfffff
[ 0.522771] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0e
[ 0.522774] pci 0000:00:1c.3: IO window: 0xc000-0xcfff
[ 0.522780] pci 0000:00:1c.3: MEM window: 0xf1c00000-0xf1efffff
[ 0.522784] pci 0000:00:1c.3: PREFETCH window:
0x000000f0000000-0x000000f01fffff
[ 0.522792] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.522793] pci 0000:00:1e.0: IO window: disabled
[ 0.522799] pci 0000:00:1e.0: MEM window: 0xf1b00000-0xf1bfffff
[ 0.522803] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.522816] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.522819] pci 0000:00:01.0: setting latency timer to 64
[ 0.522828] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.522832] pci 0000:00:1c.0: setting latency timer to 64
[ 0.522842] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.522846] pci 0000:00:1c.1: setting latency timer to 64
[ 0.522856] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.522860] pci 0000:00:1c.2: setting latency timer to 64
[ 0.522870] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.522874] pci 0000:00:1c.3: setting latency timer to 64
[ 0.522882] pci 0000:00:1e.0: setting latency timer to 64
[ 0.522885] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.522888] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.522890] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.522892] pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf6efffff]
[ 0.522894] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.522896] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff]
[ 0.522898] pci_bus 0000:0b: resource 1 mem: [0xf0200000-0xf03fffff]
[ 0.522900] pci_bus 0000:0b: resource 2 pref mem [0xf0400000-0xf05fffff]
[ 0.522903] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff]
[ 0.522905] pci_bus 0000:0c: resource 1 mem: [0xf1f00000-0xf1ffffff]
[ 0.522907] pci_bus 0000:0c: resource 2 pref mem [0xf0600000-0xf07fffff]
[ 0.522909] pci_bus 0000:0d: resource 0 io: [0x4000-0x4fff]
[ 0.522911] pci_bus 0000:0d: resource 1 mem: [0xf0800000-0xf09fffff]
[ 0.522913] pci_bus 0000:0d: resource 2 pref mem [0xf0a00000-0xf0bfffff]
[ 0.522915] pci_bus 0000:0e: resource 0 io: [0xc000-0xcfff]
[ 0.522917] pci_bus 0000:0e: resource 1 mem: [0xf1c00000-0xf1efffff]
[ 0.522919] pci_bus 0000:0e: resource 2 pref mem [0xf0000000-0xf01fffff]
[ 0.522921] pci_bus 0000:03: resource 1 mem: [0xf1b00000-0xf1bfffff]
[ 0.522923] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.522925] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.522946] NET: Registered protocol family 2
[ 0.523004] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.523209] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.523507] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.523651] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.523653] TCP reno registered
[ 0.523699] NET: Registered protocol family 1
[ 0.523885] pci 0000:01:00.0: Boot video device
[ 0.523920] Unpacking initramfs...
[ 0.729415] Freeing initrd memory: 8788k freed
[ 0.732822] DMAR: Host address width 36
[ 0.732825] DMAR: DRHD base: 0x000000fed10000 flags: 0x0
[ 0.732844] IOMMU fed10000: ver 1:0 cap c9008020e30260 ecap 1000
[ 0.732847] DMAR: DRHD base: 0x000000fed13000 flags: 0x1
[ 0.732852] IOMMU fed13000: ver 1:0 cap c9008020630260 ecap 1000
[ 0.732854] DMAR: RMRR base: 0x000000dfbe7000 end: 0x000000dfbfffff
[ 0.732856] DMAR: No ATSR found
[ 0.733136] audit: initializing netlink socket (disabled)
[ 0.733148] type=2000 audit(1272562775.731:1): initialized
[ 0.733512] highmem bounce pool size: 64 pages
[ 0.733516] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.734606] VFS: Disk quotas dquot_6.5.2
[ 0.734647] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.734711] msgmni has been set to 1691
[ 0.734854] alg: No test for stdrng (krng)
[ 0.734891] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.734893] io scheduler noop registered
[ 0.734895] io scheduler anticipatory registered
[ 0.734897] io scheduler deadline registered
[ 0.734925] io scheduler cfq registered (default)
[ 0.735023] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.735028] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.735142] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.735152] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.735290] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.735300] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.735440] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.735449] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.735589] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 0.735599] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.735736] isapnp: Scanning for PnP cards...
[ 1.091371] isapnp: No Plug & Play device found
[ 1.092423] Linux agpgart interface v0.103
[ 1.092536] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.092677] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.092960] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.093089] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.093716] i8042.c: Warning: Keylock active.
[ 1.096852] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.096856] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.096896] mice: PS/2 mouse device common for all mice
[ 1.096934] rtc_cmos 00:03: RTC can wake from S4
[ 1.096960] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.096991] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.097001] cpuidle: using governor ladder
[ 1.097003] cpuidle: using governor menu
[ 1.097006] No iBFT detected.
[ 1.097264] TCP cubic registered
[ 1.097367] NET: Registered protocol family 10
[ 1.097707] lo: Disabled Privacy Extensions
[ 1.097944] Mobile IPv6
[ 1.097947] NET: Registered protocol family 17
[ 1.097959] Using IPI No-Shortcut mode
[ 1.098004] PM: Resume from disk failed.
[ 1.098009] registered taskstats version 1
[ 1.098511] rtc_cmos 00:03: setting system clock to 2010-04-29
17:39:37 UTC (1272562777)
[ 1.098559] Freeing unused kernel memory: 384k freed
[ 1.098699] Write protecting the kernel text: 2540k
[ 1.098723] Write protecting the kernel read-only data: 928k
[ 1.099086] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.197104] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.197110] ACPI: Thermal Zone [THM] (52 C)
[ 1.309265] usbcore: registered new interface driver usbfs
[ 1.309345] usbcore: registered new interface driver hub
[ 1.309429] usbcore: registered new device driver usb
[ 1.322072] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.322104] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.322120] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.322124] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.322139] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 1.322163] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.322999] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.326205] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.326221] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 1.333326] SCSI subsystem initialized
[ 1.339838] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 1.339840] ricoh-mmc: Copyright(c) Philip Langdale
[ 1.339853] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2
[1180:0843] (rev 11)
[ 1.339866] ricoh-mmc: Controller is now disabled.
[ 1.342952] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.342954] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.356915] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.357011] ACPI: Lid Switch [LID]
[ 1.357059] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.357067] ACPI: Power Button [PBTN]
[ 1.357105] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.357108] ACPI: Sleep Button [SBTN]
[ 1.357135] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.357137] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.357139] usb usb1: Product: EHCI Host Controller
[ 1.357141] usb usb1: Manufacturer: Linux 2.6.32-4-686-bigmem ehci_hcd
[ 1.357143] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.357562] usb usb1: configuration #1 chosen from 1 choice
[ 1.357588] hub 1-0:1.0: USB hub found
[ 1.357594] hub 1-0:1.0: 6 ports detected
[ 1.358034] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.358042] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.358490] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 1.373892] acpi device:37: registered as cooling_device0
[ 1.374614] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:35/LNXVIDEO:00/input/input4
[ 1.374619] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.377310] firewire_ohci 0000:03:01.0: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 1.378623] sdhci: Secure Digital Host Controller Interface driver
[ 1.378625] sdhci: Copyright(c) Pierre Ossman
[ 1.378798] libata version 3.00 loaded.
[ 1.456033] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI
version 1.10
[ 1.456057] sdhci-pci 0000:03:01.1: SDHCI controller found
[1180:0822] (rev 21)
[ 1.456076] sdhci-pci 0000:03:01.1: PCI INT C -> GSI 18 (level,
low) -> IRQ 18
[ 1.458120] Registered led device: mmc0::
[ 1.459134] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA
[ 1.476407] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
00:21:70:f0:2c:f6
[ 1.476410] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.476435] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1004ff-0ff
[ 1.476463] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.476475] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.476478] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.476487] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 1.476512] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.480389] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.480400] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 1.497007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.497022] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.497024] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.497026] usb usb2: Product: EHCI Host Controller
[ 1.497028] usb usb2: Manufacturer: Linux 2.6.32-4-686-bigmem ehci_hcd
[ 1.497030] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.497114] usb usb2: configuration #1 chosen from 1 choice
[ 1.497165] hub 2-0:1.0: USB hub found
[ 1.497170] hub 2-0:1.0: 6 ports detected
[ 1.499546] ahci 0000:00:1f.2: version 3.0
[ 1.499557] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.499598] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[ 1.499640] ahci: SSS flag set, parallel bus scan disabled
[ 1.499676] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3
Gbps 0x33 impl RAID mode
[ 1.499679] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led
clo pmp pio slum part ccc ems sxs
[ 1.499684] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.510948] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.521042] scsi0 : ahci
[ 1.521103] scsi1 : ahci
[ 1.521146] scsi2 : ahci
[ 1.521188] scsi3 : ahci
[ 1.521230] scsi4 : ahci
[ 1.521272] scsi5 : ahci
[ 1.521626] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port
0xfed1c900 irq 30
[ 1.521629] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port
0xfed1c980 irq 30
[ 1.521631] ata3: DUMMY
[ 1.521632] ata4: DUMMY
[ 1.521635] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port
0xfed1cb00 irq 30
[ 1.521638] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port
0xfed1cb80 irq 30
[ 1.521662] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.521670] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.521673] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.521682] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 1.521708] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 1.521735] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.521738] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.521740] usb usb3: Product: UHCI Host Controller
[ 1.521741] usb usb3: Manufacturer: Linux 2.6.32-4-686-bigmem uhci_hcd
[ 1.521743] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.521798] usb usb3: configuration #1 chosen from 1 choice
[ 1.521821] hub 3-0:1.0: USB hub found
[ 1.521826] hub 3-0:1.0: 2 ports detected
[ 1.521867] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.521873] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.521876] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.521881] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 1.521911] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 1.521938] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.521940] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.521942] usb usb4: Product: UHCI Host Controller
[ 1.521944] usb usb4: Manufacturer: Linux 2.6.32-4-686-bigmem uhci_hcd
[ 1.521946] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.521994] usb usb4: configuration #1 chosen from 1 choice
[ 1.522015] hub 4-0:1.0: USB hub found
[ 1.522019] hub 4-0:1.0: 2 ports detected
[ 1.522056] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.522061] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.522065] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.522072] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 1.522097] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 1.522121] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.522124] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.522126] usb usb5: Product: UHCI Host Controller
[ 1.522128] usb usb5: Manufacturer: Linux 2.6.32-4-686-bigmem uhci_hcd
[ 1.522129] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.522173] usb usb5: configuration #1 chosen from 1 choice
[ 1.522194] hub 5-0:1.0: USB hub found
[ 1.522198] hub 5-0:1.0: 2 ports detected
[ 1.522234] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.522242] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.522245] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.522251] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 1.522275] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 1.522302] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.522305] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.522307] usb usb6: Product: UHCI Host Controller
[ 1.522308] usb usb6: Manufacturer: Linux 2.6.32-4-686-bigmem uhci_hcd
[ 1.522310] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.522356] usb usb6: configuration #1 chosen from 1 choice
[ 1.522377] hub 6-0:1.0: USB hub found
[ 1.522382] hub 6-0:1.0: 2 ports detected
[ 1.522419] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.522424] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.522427] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.522433] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 1.522456] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 1.522481] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.522484] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.522486] usb usb7: Product: UHCI Host Controller
[ 1.522488] usb usb7: Manufacturer: Linux 2.6.32-4-686-bigmem uhci_hcd
[ 1.522490] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.522533] usb usb7: configuration #1 chosen from 1 choice
[ 1.522553] hub 7-0:1.0: USB hub found
[ 1.522558] hub 7-0:1.0: 2 ports detected
[ 1.522594] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.522599] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.522602] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.522611] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 1.522635] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 1.522663] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.522665] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.522667] usb usb8: Product: UHCI Host Controller
[ 1.522669] usb usb8: Manufacturer: Linux 2.6.32-4-686-bigmem uhci_hcd
[ 1.522671] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.522714] usb usb8: configuration #1 chosen from 1 choice
[ 1.522734] hub 8-0:1.0: USB hub found
[ 1.522742] hub 8-0:1.0: 2 ports detected
[ 1.780010] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 1.953713] usb 1-6: New USB device found, idVendor=0c45, idProduct=63f8
[ 1.953715] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.953717] usb 1-6: Product: Laptop_Integrated_Webcam_0.3M
[ 1.953719] usb 1-6: Manufacturer: CN0TX593724879320BTX
[ 1.953775] usb 1-6: configuration #1 chosen from 1 choice
[ 1.956045] firewire_core: created device fw0: GUID 324fc000229aa490, S400
[ 2.004015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.012937] ata1.00: ATA-8: Hitachi HTS723216L9A362, FC2OC30F, max UDMA/133
[ 2.012939] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.014696] ata1.00: configured for UDMA/133
[ 2.028081] scsi 0:0:0:0: Direct-Access ATA Hitachi
HTS72321 FC2O PQ: 0 ANSI: 5
[ 2.068007] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.246183] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
[ 2.246186] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.246188] usb 5-1: Product: 5880
[ 2.246189] usb 5-1: Manufacturer: Broadcom Corp
[ 2.246191] usb 5-1: SerialNumber: 0123456789ABCD
[ 2.246234] usb 5-1: configuration #0 chosen from 1 choice
[ 2.246236] usb 5-1: config 0 descriptor??
[ 2.916013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.935095] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633A, D200, max
UDMA/100, ATAPI AN
[ 2.935107] ata2.00: applying bridge limits
[ 2.953379] ata2.00: configured for UDMA/100
[ 2.970132] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW
TS-U633A D200 PQ: 0 ANSI: 5
[ 3.288014] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.624018] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.645217] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks:
(160 GB/149 GiB)
[ 3.645249] sd 0:0:0:0: [sda] Write Protect is off
[ 3.645251] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.645267] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.645358] sda: sda1 sda2 < sda5 sda6 >
[ 3.700680] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.709849] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 3.709852] Uniform CD-ROM driver Revision: 3.20
[ 3.709911] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.713536] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.713601] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.968235] PM: Starting manual resume from disk
[ 3.968238] PM: Resume from partition 8:5
[ 3.968239] PM: Checking hibernation image.
[ 3.968367] PM: Error -22 checking image file
[ 3.968369] PM: Resume from disk failed.
[ 3.972637] PM: Marking nosave pages: 000000000009b000 - 0000000000100000
[ 3.972641] PM: Basic memory bitmaps created
[ 3.986568] PM: Basic memory bitmaps freed
[ 4.022851] kjournald starting. Commit interval 5 seconds
[ 4.022855] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.003177] udev: starting version 151
[ 6.421897] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 6.422271] ACPI: SSDT df450999 00281 (v01 PmRef BspIst 00003000
INTL 20050624)
[ 6.422505] ACPI: WMI: Mapper loaded
[ 6.423447] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.423729] ACPI: AC Adapter [AC] (off-line)
[ 6.424055] ACPI: SSDT df450df1 005C6 (v01 PmRef BspCst 00003001
INTL 20050624)
[ 6.427498] Monitor-Mwait will be used to enter C-1 state
[ 6.428705] Monitor-Mwait will be used to enter C-2 state
[ 6.428804] Monitor-Mwait will be used to enter C-3 state
[ 6.428808] Marking TSC unstable due to TSC halts in idle
[ 6.428879] processor LNXCPU:00: registered as cooling_device1
[ 6.429300] ACPI: SSDT df450c1a 001D7 (v01 PmRef ApIst 00003000
INTL 20050624)
[ 6.429553] ACPI: SSDT df4513b7 0008D (v01 PmRef ApCst 00003000
INTL 20050624)
[ 6.429839] Switching to clocksource hpet
[ 6.429936] processor LNXCPU:01: registered as cooling_device2
[ 6.697078] ACPI: Battery Slot [BAT0] (battery present)
[ 6.697196] ACPI: Battery Slot [BAT1] (battery absent)
[ 6.756928] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level,
low) -> IRQ 19
[ 7.083356] input: DualPoint Stick as
/devices/platform/i8042/serio1/input/input6
[ 7.100516] input: AlpsPS/2 ALPS DualPoint TouchPad as
/devices/platform/i8042/serio1/input/input7
[ 7.127279] cfg80211: Using static regulatory domain info
[ 7.127281] cfg80211: Regulatory domain: US
[ 7.127282] (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 7.127285] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 7.127287] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.127289] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.127291] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.127294] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.127296] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 7.127510] cfg80211: Calling CRDA for country: US
[ 7.160425] Linux video capture interface: v2.00
[ 7.366937] uvcvideo: Found UVC 1.00 device
Laptop_Integrated_Webcam_0.3M (0c45:63f8)
[ 7.382523] input: Laptop_Integrated_Webcam_0.3M as
/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input8
[ 7.382565] usbcore: registered new interface driver uvcvideo
[ 7.382568] USB Video Class driver (v0.1.0)
[ 7.391245] iwlagn: Intel(R) Wireless WiFi Link AGN driver for
Linux, 1.3.27ks
[ 7.391247] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 7.391502] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.391510] iwlagn 0000:0c:00.0: setting latency timer to 64
[ 7.391542] iwlagn 0000:0c:00.0: Detected Intel Wireless WiFi Link
5100AGN REV=0x54
[ 7.427800] iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 24
802.11a channels
[ 7.427873] iwlagn 0000:0c:00.0: irq 31 for MSI/MSI-X
[ 7.500942] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.697711] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
low) -> IRQ 21
[ 7.697737] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.896664] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input9
[ 7.905108] input: HDA Intel Mic at Sep Left Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.905156] input: HDA Intel Mic at Ext Right Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.905202] input: HDA Intel Line Out at Sep Left Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.905247] input: HDA Intel HP Out at Ext Right Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.744361] Adding 3903752k swap on /dev/sda5. Priority:-1
extents:1 across:3903752k
[ 8.978558] EXT3 FS on sda1, internal journal
[ 9.178174] loop: module loaded
[ 9.758261] fuse init (API version 7.13)
[ 10.160620] kjournald starting. Commit interval 5 seconds
[ 10.160879] EXT3 FS on sda6, internal journal
[ 10.160885] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.852378] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 11.908273] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 11.908493] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.273140] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 17.273144] platform microcode: firmware: requesting intel-ucode/06-17-0a
[ 17.316828] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 17.316832] platform microcode: firmware: requesting intel-ucode/06-17-0a
[ 17.319848] Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 36.426652] Bluetooth: Core ver 2.15
[ 36.427824] NET: Registered protocol family 31
[ 36.427829] Bluetooth: HCI device and connection manager initialized
[ 36.427835] Bluetooth: HCI socket layer initialized
[ 36.468865] Bluetooth: L2CAP ver 2.14
[ 36.468871] Bluetooth: L2CAP socket layer initialized
[ 36.808242] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 36.808249] Bluetooth: BNEP filters: protocol multicast
[ 36.946280] Bridge firewalling registered
[ 37.091176] Bluetooth: SCO (Voice Link) ver 0.6
[ 37.091182] Bluetooth: SCO socket layer initialized
[ 40.657648] [drm] Initialized drm 1.1.0 20060810
[ 41.091878] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 41.091898] nouveau 0000:01:00.0: setting latency timer to 64
[ 41.093029] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
[ 41.093384] [drm] nouveau 0000:01:00.0: Detected an NV50 generation
card (0x298580a2)
[ 41.094417] [drm] nouveau 0000:01:00.0: Attempting to load BIOS
image from PRAMIN
[ 41.199384] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 41.199388] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 41.199390] [drm] nouveau 0000:01:00.0: Bios version 62.98.3c.00
[ 41.199393] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not
currently supported
[ 41.199395] [drm] nouveau 0000:01:00.0: Found Display Configuration
Block version 4.0
[ 41.199398] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 41.199400] [drm] nouveau 0000:01:00.0: 0: 0x00000041: type 0x41
idx 0 tag 0xff
[ 41.199403] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00
idx 1 tag 0xff
[ 41.199405] [drm] nouveau 0000:01:00.0: 2: 0x00005246: type 0x46
idx 2 tag 0x07
[ 41.199407] [drm] nouveau 0000:01:00.0: 3: 0x0000a346: type 0x46
idx 3 tag 0x08
[ 41.199409] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
[ 41.199412] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
[ 41.199414] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022386 0f200010
[ 41.199416] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02022332 00020010
[ 41.199418] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 040333a6 0f200010
[ 41.199419] [drm] nouveau 0000:01:00.0: Raw DCB entry 5: 04033312 00020010
[ 41.199421] [drm] nouveau 0000:01:00.0: Raw DCB entry 6: 0000000e 00000000
[ 41.199438] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0
at offset 0xD601
[ 41.252165] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1
at offset 0xD9B3
[ 41.273091] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2
at offset 0xE259
[ 41.273119] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3
at offset 0xE34B
[ 41.280189] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4
at offset 0xE557
[ 41.280206] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at
offset 0xE5BC
[ 41.304078] [drm] nouveau 0000:01:00.0: 0xE5BC: Condition still not
met after 20ms, skipping following opcodes
[ 41.304107] [drm] nouveau 0000:01:00.0: 0xC1AA: parsing output script 0
[ 41.304115] [drm] nouveau 0000:01:00.0: 0xC7DC: parsing output script 0
[ 41.304122] [drm] nouveau 0000:01:00.0: 0xC5CE: parsing output script 0
[ 41.304141] [drm] nouveau 0000:01:00.0: 0xC7DC: parsing output script 0
[ 41.304148] [drm] nouveau 0000:01:00.0: 0xC5CE: parsing output script 0
[ 41.477214] [TTM] Zone kernel: Available graphics memory: 433134 kiB.
[ 41.477220] [TTM] Zone highmem: Available graphics memory: 2069640 kiB.
[ 41.477247] [drm] nouveau 0000:01:00.0: 256 MiB VRAM
[ 41.534084] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 41.534144] mtrr: type mismatch for e0000000,10000000 old:
write-back new: write-combining
[ 41.534666] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 41.547594] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc:
initialised FIFO 1
[ 41.549261] [drm] nouveau 0000:01:00.0: Detected a LVDS output
[ 41.549282] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 41.549287] [drm] nouveau 0000:01:00.0: Detected a DP output
[ 41.549293] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 41.549298] [drm] nouveau 0000:01:00.0: Detected a DP output
[ 41.549303] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 41.549310] [drm] nouveau 0000:01:00.0: Detected a LVDS connector
[ 41.575168] lp: driver loaded but no devices found
[ 41.596363] ppdev: user-space parallel port driver
[ 41.664553] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 41.664739] [drm] nouveau 0000:01:00.0: Detected a DisplayPort connector
[ 41.664802] [drm] nouveau 0000:01:00.0: Detected a DisplayPort connector
[ 42.791416] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb:
0x40250000, bo f68e6c00
[ 42.791736] Console: switching to colour frame buffer device 180x56
[ 42.791742] fb0: nouveaufb frame buffer device
[ 42.791744] registered panic notifier
[ 42.791748] [drm] Initialized nouveau 0.0.15 20090420 for
0000:01:00.0 on minor 0
[ 43.226970] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 43.239896] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc:
initialised FIFO 2
[ 43.275949] [drm] nouveau 0000:01:00.0: 0xC1AE: parsing output script 1
[ 43.276033] [drm] nouveau 0000:01:00.0: 0xC065: parsing clock script 0
[ 43.531587] [drm] nouveau 0000:01:00.0: 0xC1A5: parsing clock script 1
[ 88.951380] [drm] nouveau 0000:01:00.0: 0x1203: parsing clock script 0
[ 179.626582] [drm] nouveau 0000:01:00.0: plugged DisplayPort-1
[ 180.165305] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 180.297502] usb 1-3: New USB device found, idVendor=413c, idProduct=2513
[ 180.297511] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 180.297695] usb 1-3: configuration #1 chosen from 1 choice
[ 180.299345] hub 1-3:1.0: USB hub found
[ 180.299495] hub 1-3:1.0: 3 ports detected
[ 180.540277] usb 1-4: new high speed USB device using ehci_hcd and address 5
[ 180.672653] usb 1-4: New USB device found, idVendor=413c, idProduct=2513
[ 180.672661] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 180.672855] usb 1-4: configuration #1 chosen from 1 choice
[ 180.673083] hub 1-4:1.0: USB hub found
[ 180.673251] hub 1-4:1.0: 3 ports detected
[ 180.944715] usb 1-4.1: new high speed USB device using ehci_hcd and address 6
[ 181.037155] usb 1-4.1: New USB device found, idVendor=0424, idProduct=2504
[ 181.037164] usb 1-4.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 181.037366] usb 1-4.1: configuration #1 chosen from 1 choice
[ 181.037561] hub 1-4.1:1.0: USB hub found
[ 181.039246] hub 1-4.1:1.0: 4 ports detected
[ 181.298027] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: None
[ 181.298035] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 181.298526] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 181.314083] usb 1-4.1.1: new low speed USB device using ehci_hcd
and address 7
[ 181.427490] usb 1-4.1.1: New USB device found, idVendor=046d, idProduct=c043
[ 181.427499] usb 1-4.1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 181.427506] usb 1-4.1.1: Product: USB-PS/2 Optical Mouse
[ 181.427511] usb 1-4.1.1: Manufacturer: Logitech
[ 181.427713] usb 1-4.1.1: configuration #1 chosen from 1 choice
[ 181.500588] usb 1-4.1.2: new full speed USB device using ehci_hcd
and address 8
[ 181.598706] usb 1-4.1.2: New USB device found, idVendor=413c, idProduct=1003
[ 181.598715] usb 1-4.1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 181.598722] usb 1-4.1.2: Product: Dell USB Keyboard Hub
[ 181.598727] usb 1-4.1.2: Manufacturer: Dell
[ 181.598936] usb 1-4.1.2: configuration #1 chosen from 1 choice
[ 181.599670] hub 1-4.1.2:1.0: USB hub found
[ 181.599877] hub 1-4.1.2:1.0: 3 ports detected
[ 181.872242] usb 1-4.1.2.1: new full speed USB device using ehci_hcd
and address 9
[ 181.906608] usbcore: registered new interface driver hiddev
[ 181.910430] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/input/input14
[ 181.910649] generic-usb 0003:046D:C043.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1a.7-4.1.1/input0
[ 181.910699] usbcore: registered new interface driver usbhid
[ 181.910706] usbhid: v2.6:USB HID core driver
[ 181.967960] usb 1-4.1.2.1: New USB device found, idVendor=413c,
idProduct=2010
[ 181.967970] usb 1-4.1.2.1: New USB device strings: Mfr=1,
Product=3, SerialNumber=0
[ 181.967977] usb 1-4.1.2.1: Product: Dell USB Keyboard
[ 181.967982] usb 1-4.1.2.1: Manufacturer: Dell
[ 181.968238] usb 1-4.1.2.1: configuration #1 chosen from 1 choice
[ 181.970587] input: Dell Dell USB Keyboard as
/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2.1/1-4.1.2.1:1.0/input/input15
[ 181.970914] generic-usb 0003:413C:2010.0002: input,hidraw1: USB HID
v1.10 Keyboard [Dell Dell USB Keyboard] on
usb-0000:00:1a.7-4.1.2.1/input0
[ 181.973883] input: Dell Dell USB Keyboard as
/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2.1/1-4.1.2.1:1.1/input/input16
[ 181.974163] generic-usb 0003:413C:2010.0003: input,hidraw2: USB HID
v1.10 Device [Dell Dell USB Keyboard] on
usb-0000:00:1a.7-4.1.2.1/input1
[ 192.108639] eth0: no IPv6 routers present
[ 208.373424] [drm] nouveau 0000:01:00.0: unplugged DisplayPort-1
[ 208.386378] [drm] nouveau 0000:01:00.0: plugged DisplayPort-1
[ 208.387077] [drm] nouveau 0000:01:00.0: plugged DisplayPort-1
[ 208.387751] [drm] nouveau 0000:01:00.0: unplugged DisplayPort-1
[ 208.388101] [drm] nouveau 0000:01:00.0: plugged DisplayPort-1
[ 208.392371] [drm] nouveau 0000:01:00.0: unplugged DisplayPort-1
[ 208.392401] [drm] nouveau 0000:01:00.0: plugged DisplayPort-1
[ 208.399908] [drm] nouveau 0000:01:00.0: unplugged DisplayPort-1
[ 208.400291] [drm] nouveau 0000:01:00.0: plugged DisplayPort-1
[ 208.558692] [drm] nouveau 0000:01:00.0: unplugged DisplayPort-1
[ 234.089962] [drm] nouveau 0000:01:00.0: 0x1203: parsing clock script 0
[ 243.263245] [drm] nouveau 0000:01:00.0: 0xC1AE: parsing output script 1
[ 244.320836] [drm] nouveau 0000:01:00.0: 0xC065: parsing clock script 0
[ 244.578802] [drm] nouveau 0000:01:00.0: 0xC1A5: parsing clock script 1
Reply to: