Your message dated Sun, 18 Apr 2010 19:36:18 +0200 with message-id <20100418173618.GA12467@patate.is-a-geek.org> and subject line Re: Bug#525896: linux-image-2.6.26-2-686: GUI mode (X.org) does not start on a HP DC7100 has caused the Debian Bug report #525896, regarding linux-image-2.6.26-2-686: GUI mode (X.org) does not start on a HP DC7100 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 525896: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=525896 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---Package: linux-image-2.6.26-2-686
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.26-2-686: GUI mode (X.org) does not start on a HP DC7100
- From: Pierre Bauduin <pierre@baudu.in>
- Date: Mon, 27 Apr 2009 20:10:48 +0200
- Message-id: <7cd7a3e80904271110i30e5206dm7fe74050f1e5bf8@mail.gmail.com>
Version: 2.6.26-15
Severity: important
Subject: linux-image-2.6.26-2-686: GUI mode (X.org) does not start on a HP DC7100
X-Mailer: reportbug 3.48
X-Debbugs-Cc: pierre@baudu.in
Hi there,
I am using Debian Live on USB memory sticks.
When the kernel that comes with Debian 5.0 was linux-image-2.6.26-1-686, I could flawlessly boot Debian Live in GUI mode (X.org) on a Hewlett Packard (HP) DC7100 machine.
Now that Debian 5.0 has been updated, and that the kernel is linux-image-2.6.26-2-686, Debian Live won't boot in GUI mode (X.org) on the very same Hewlett Packard (HP) DC7100 machine.
Debian Live starts in command-line mode, then attempts to start X. The screen goes blank for about five seconds, then it comes back to command-line mode.
Note that is bug is about linux-image-2.6.26-2-686 but it is similar to Debian Bug 525482: same problem on the same hardware.
I have included below output from lspci, lshw, as well as the contents of /var/log/Xorg.log
lspci:
-----
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation 82915G Integrated Graphics Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
40:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
lshw:
----
debian-live
description: Low Profile Desktop Computer
product: HP Compaq dc7100 SFF(PL181ES)
vendor: Hewlett-Packard
width: 32 bits
capabilities: smbios-2.3 dmi-2.3 smp-1.4 smp
configuration: boot=normal chassis=low-profile cpus=1 uuid=CB60CE61-46C9-D911-BBDA-21683FEB0013
*-core
description: Motherboard
product: 097Ch
vendor: Hewlett-Packard
physical id: 0
serial: CZC5230TDJ
*-firmware
description: BIOS
vendor: Hewlett-Packard
physical id: 1
version: 786C1 v01.05 (06/16/2004)
size: 128KiB
capacity: 448KiB
capabilities: pci pnp upgrade shadowing cdboot bootselect edd int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int5printscreen int9keyboard int14serial int17printer acpi usb ls120boot zipboot biosbootspecification netboot
*-cpu
description: CPU
product: Intel(R) Pentium(R) 4 CPU 2.80GHz
vendor: Intel Corp.
physical id: 5
bus info: cpu@0
version: 15.4.1
serial: 0000-0F41-0000-0000-0000-0000
slot: XU1 PROCESSOR
size: 2800MHz
width: 32 bits
clock: 800MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pebs bts pni monitor ds_cpl cid xtpr
configuration: id=1
*-cache:0
description: L1 cache
physical id: 6
slot: Internal L1 Cache
size: 28KiB
capacity: 28KiB
capabilities: burst internal write-through data
*-cache:1
description: L2 cache
physical id: 7
slot: Cache L2
size: 1MiB
capacity: 4MiB
capabilities: burst internal write-back data
*-logicalcpu:0
description: Logical CPU
physical id: 1.1
width: 32 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 1.2
width: 32 bits
capabilities: logical
*-memory:0
description: System Memory
physical id: 33
slot: System board or motherboard
*-bank:0
description: DIMM DDR Synchronous [empty]
vendor: JEDEC ID:
physical id: 0
slot: XMM1
*-bank:1
description: DIMM DDR Synchronous 400 MHz (2.5 ns)
product: M3 68L3223ETM-CCC
vendor: JEDEC ID:CE 00 00 00 00 00 00 00
physical id: 1
serial: 3BBE08F6
slot: XMM2
size: 256MiB
width: 64 bits
clock: 400MHz (2.5ns)
*-bank:2
description: DIMM DDR Synchronous 400 MHz (2.5 ns)
product: M3 68L3223ETM-CCC
vendor: JEDEC ID:CE 00 00 00 00 00 00 00
physical id: 2
serial: 85CD02F3
slot: XMM3
size: 256MiB
width: 64 bits
clock: 400MHz (2.5ns)
*-bank:3
description: DIMM DDR Synchronous 400 MHz (2.5 ns)
product: M3 68L3223ETM-CCC
vendor: JEDEC ID:CE 00 00 00 00 00 00 00
physical id: 3
serial: 84CD01F3
slot: XMM4
size: 256MiB
width: 64 bits
clock: 400MHz (2.5ns)
*-memory:1 UNCLAIMED
description: Flash Memory
physical id: 34
slot: System board or motherboard
capacity: 512KiB
*-bank UNCLAIMED
description: Chip FLASH Non-volatile
physical id: 0
slot: SYSTEM ROM
size: 512KiB
width: 4 bits
*-memory:2 UNCLAIMED
physical id: 0
*-memory:3 UNCLAIMED
physical id: 2
*-pci
description: Host bridge
product: 82915G/P/GV/GL/PL/910GL Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 04
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-intel module=intel_agp
*-display:0 UNCLAIMED
description: VGA compatible controller
product: 82915G/GV/910GL Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm vga_controller bus_master cap_list
configuration: latency=0
*-display:1 UNCLAIMED
description: Display controller
product: 82915G Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: latency=0
*-pci:0
description: PCI bridge
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport-driver
*-pci:1
description: PCI bridge
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2
vendor: Intel Corporation
physical id: 1c.1
bus info: pci@0000:00:1c.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport-driver
*-network
description: Ethernet interface
product: NetXtreme BCM5751 Gigabit Ethernet PCI Express
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:40:00.0
logical name: eth0
version: 01
serial: 00:13:21:68:3f:eb
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.92.1 duplex=full firmware=5751-v3.29a ip=10.20.225.151 latency=0 link=yes module=tg3 multicast=yes port=twisted pair speed=100MB/s
*-usb:0
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.26-2-686 uhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12.0MB/s
*-usb:1
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.26-2-686 uhci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12.0MB/s
*-usb:2
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.26-2-686 uhci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12.0MB/s
*-usb:3
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci@0000:00:1d.3
version: 03
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.26-2-686 uhci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12.0MB/s
*-usb:4
description: USB Controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 module=ehci_hcd
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.26-2-686 ehci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 2.06
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480.0MB/s
*-usb:0
description: Mass storage device
product: DataTraveler 2.0
vendor: Kingston
physical id: 7
bus info: usb@5:7
logical name: scsi0
version: 2.00
serial: 00147809022FA8C1AFFF00A3
capabilities: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=200mA speed=480.0MB/s
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sdb
size: 1917MiB (2010MB)
capabilities: partitioned partitioned:dos
configuration: signature=000613e1
*-volume
description: Windows FAT volume
vendor: mkdosfs
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sdb1
logical name: /live/image
version: FAT16
serial: d1f9-69e6
size: 388MiB
capacity: 388MiB
capabilities: primary bootable fat initialized
configuration: FATs=2 filesystem=fat label=DEBIAN_LIVE mount.fstype=vfat mount.options=ro,noatime,fmask=0022,dmask=0022,allow_utime=177777,codepage=cp437,iocharset=utf8 state=mounted
*-usb:1
description: Mass storage device
product: Flash Voyager
vendor: Corsair
physical id: 8
bus info: usb@5:8
logical name: scsi3
version: 1.00
serial: d7364f0145d365
capabilities: usb-2.00 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=98mA speed=480.0MB/s
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@3:0.0.0
logical name: /dev/sdc
size: 15GiB (16GB)
capabilities: partitioned partitioned:dos
configuration: signature=04dd5721
*-volume
description: Windows FAT volume
vendor: mkdosfs
physical id: 1
bus info: scsi@3:0.0.0,1
logical name: /dev/sdc1
logical name: /mnt/temporary
version: FAT32
serial: cafe-babe
size: 15GiB
capacity: 15GiB
capabilities: primary fat initialized
configuration: FATs=2 filesystem=fat label=PBN mount.fstype=vfat mount.options=rw,fmask=0022,dmask=0022,allow_utime=177777,codepage=cp437,iocharset=utf8 state=mounted
*-pci:2
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: d3
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
*-multimedia
description: Multimedia audio controller
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller
vendor: Intel Corporation
physical id: 1e.2
bus info: pci@0000:00:1e.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=Intel ICH latency=0 module=snd_intel8x0
*-isa
description: ISA bridge
product: 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-ide:0
description: IDE interface
product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=PIIX_IDE latency=0 module=piix
*-ide:0
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 33MHz
*-cdrom
description: DVD reader
product: LITE-ON DVD SOHD-167T
physical id: 0
bus info: ide@0.0
logical name: /dev/hda
version: 9QSR
capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy audio dvd
configuration: mode=udma3 status=nodisc
*-ide:1
description: IDE Channel 1
physical id: 1
bus info: ide@1
logical name: ide1
clock: 33MHz
*-ide:1
description: IDE interface
product: 82801FB/FW (ICH6/ICH6W) SATA Controller
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
logical name: scsi1
version: 03
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list emulated
configuration: driver=ata_piix latency=0 module=ata_piix
*-disk
description: ATA Disk
product: WDC WD800JD-60JR
vendor: Western Digital
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sda
version: 05.0
serial: WD-WMAMD2492550
size: 74GiB (80GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=38ba38b9
*-volume:0
description: Windows NTFS volume
physical id: 1
bus info: scsi@1:0.0.0,1
logical name: /dev/sda1
version: 3.1
serial: 5a4562ad-1ab9-724d-964d-8f5a1dc63139
size: 29GiB
capacity: 29GiB
capabilities: primary bootable ntfs initialized
configuration: clustersize=4096 created=2003-08-19 15:30:01 filesystem=ntfs state=clean
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@1:0.0.0,2
logical name: /dev/sda2
size: 45GiB
capacity: 45GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: HPFS/NTFS partition
physical id: 5
logical name: /dev/sda5
capacity: 45GiB
/var/log/Xorg.0.log:
--------------------
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny1)
Current Operating System: Linux debian-live 2.6.26-2-686 #1 SMP Thu Mar 26 01:08:11 UTC 2009 i686
Build Date: 15 March 2009 03:18:10PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 27 14:16:54 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) |-->Input Device "Configured Mouse"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the first mouse device.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the first keyboard device.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e38c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2580 card 103c,3006 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2582 card 103c,3006 rev 04 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,2782 card 103c,3006 rev 04 class 03,80,00 hdr 80
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 103c,3006 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 103c,3006 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 103c,3006 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 103c,3006 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 103c,3006 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev d3 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 103c,3006 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2640 card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 103c,3006 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2651 card 103c,3006 rev 03 class 01,01,8f hdr 00
(II) PCI: 40:00:0: chip 14e4,1677 card 103c,3006 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,64), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 32: bridge is at (0:28:0), (0,32,32), BCTRL: 0x0006 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 64: bridge is at (0:28:1), (0,64,64), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 64 non-prefetchable memory range:
[0] -1 0 0xf0200000 - 0xf04fffff (0x300000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:30:0), (0,5,5), BCTRL: 0x0006 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation 82915G/GV/910GL Integrated Graphics Controller rev 4, Mem @ 0xcfe00000/19, 0xe0000000/28, 0xcff00000/18, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation 82915G Integrated Graphics Controller rev 4, Mem @ 0xcfe80000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xf0400000 - 0xf040ffff (0x10000) MX[B]
[1] -1 0 0xcff40600 - 0xcff406ff (0x100) MX[B]
[2] -1 0 0xcff40400 - 0xcff405ff (0x200) MX[B]
[3] -1 0 0xcff40000 - 0xcff403ff (0x400) MX[B]
[4] -1 0 0xcff00000 - 0xcff3ffff (0x40000) MX[B](B)
[5] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[6] -1 0 0xcfe00000 - 0xcfe7ffff (0x80000) MX[B](B)
[7] -1 0 0x000014f0 - 0x000014ff (0x10) IX[B]
[8] -1 0 0x00001834 - 0x00001837 (0x4) IX[B]
[9] -1 0 0x00001820 - 0x00001827 (0x8) IX[B]
[10] -1 0 0x00001830 - 0x00001833 (0x4) IX[B]
[11] -1 0 0x00001818 - 0x0000181f (0x8) IX[B]
[12] -1 0 0x000014e0 - 0x000014ef (0x10) IX[B]
[13] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[14] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[15] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[17] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[18] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[19] -1 0 0x000014a0 - 0x000014bf (0x20) IX[B]
[20] -1 0 0x00001480 - 0x0000149f (0x20) IX[B]
[21] -1 0 0x00001460 - 0x0000147f (0x20) IX[B]
[22] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[23] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xcfe80000 - 0xcfefffff (0x80000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf0400000 - 0xf040ffff (0x10000) MX[B]
[1] -1 0 0xcff40600 - 0xcff406ff (0x100) MX[B]
[2] -1 0 0xcff40400 - 0xcff405ff (0x200) MX[B]
[3] -1 0 0xcff40000 - 0xcff403ff (0x400) MX[B]
[4] -1 0 0xcff00000 - 0xcff3ffff (0x40000) MX[B](B)
[5] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[6] -1 0 0xcfe00000 - 0xcfe7ffff (0x80000) MX[B](B)
[7] -1 0 0x000014f0 - 0x000014ff (0x10) IX[B]
[8] -1 0 0x00001834 - 0x00001837 (0x4) IX[B]
[9] -1 0 0x00001820 - 0x00001827 (0x8) IX[B]
[10] -1 0 0x00001830 - 0x00001833 (0x4) IX[B]
[11] -1 0 0x00001818 - 0x0000181f (0x8) IX[B]
[12] -1 0 0x000014e0 - 0x000014ef (0x10) IX[B]
[13] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[14] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[15] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[17] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[18] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[19] -1 0 0x000014a0 - 0x000014bf (0x20) IX[B]
[20] -1 0 0x00001480 - 0x0000149f (0x20) IX[B]
[21] -1 0 0x00001460 - 0x0000147f (0x20) IX[B]
[22] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[23] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xcfe80000 - 0xcfefffff (0x80000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf0400000 - 0xf040ffff (0x10000) MX[B]
[5] -1 0 0xcff40600 - 0xcff406ff (0x100) MX[B]
[6] -1 0 0xcff40400 - 0xcff405ff (0x200) MX[B]
[7] -1 0 0xcff40000 - 0xcff403ff (0x400) MX[B]
[8] -1 0 0xcff00000 - 0xcff3ffff (0x40000) MX[B](B)
[9] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[10] -1 0 0xcfe00000 - 0xcfe7ffff (0x80000) MX[B](B)
[11] -1 0 0xcfe80000 - 0xcfefffff (0x80000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x000014f0 - 0x000014ff (0x10) IX[B]
[15] -1 0 0x00001834 - 0x00001837 (0x4) IX[B]
[16] -1 0 0x00001820 - 0x00001827 (0x8) IX[B]
[17] -1 0 0x00001830 - 0x00001833 (0x4) IX[B]
[18] -1 0 0x00001818 - 0x0000181f (0x8) IX[B]
[19] -1 0 0x000014e0 - 0x000014ef (0x10) IX[B]
[20] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[21] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[22] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[24] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[25] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[26] -1 0 0x000014a0 - 0x000014bf (0x20) IX[B]
[27] -1 0 0x00001480 - 0x0000149f (0x20) IX[B]
[28] -1 0 0x00001460 - 0x0000147f (0x20) IX[B]
[29] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[30] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched intel from file name intel.ids in autoconfig
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 915G found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf0400000 - 0xf040ffff (0x10000) MX[B]
[5] -1 0 0xcff40600 - 0xcff406ff (0x100) MX[B]
[6] -1 0 0xcff40400 - 0xcff405ff (0x200) MX[B]
[7] -1 0 0xcff40000 - 0xcff403ff (0x400) MX[B]
[8] -1 0 0xcff00000 - 0xcff3ffff (0x40000) MX[B](B)
[9] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[10] -1 0 0xcfe00000 - 0xcfe7ffff (0x80000) MX[B](B)
[11] -1 0 0xcfe80000 - 0xcfefffff (0x80000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x000014f0 - 0x000014ff (0x10) IX[B]
[15] -1 0 0x00001834 - 0x00001837 (0x4) IX[B]
[16] -1 0 0x00001820 - 0x00001827 (0x8) IX[B]
[17] -1 0 0x00001830 - 0x00001833 (0x4) IX[B]
[18] -1 0 0x00001818 - 0x0000181f (0x8) IX[B]
[19] -1 0 0x000014e0 - 0x000014ef (0x10) IX[B]
[20] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[21] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[22] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[24] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[25] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[26] -1 0 0x000014a0 - 0x000014bf (0x20) IX[B]
[27] -1 0 0x00001480 - 0x0000149f (0x20) IX[B]
[28] -1 0 0x00001460 - 0x0000147f (0x20) IX[B]
[29] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[30] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf0400000 - 0xf040ffff (0x10000) MX[B]
[5] -1 0 0xcff40600 - 0xcff406ff (0x100) MX[B]
[6] -1 0 0xcff40400 - 0xcff405ff (0x200) MX[B]
[7] -1 0 0xcff40000 - 0xcff403ff (0x400) MX[B]
[8] -1 0 0xcff00000 - 0xcff3ffff (0x40000) MX[B](B)
[9] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[10] -1 0 0xcfe00000 - 0xcfe7ffff (0x80000) MX[B](B)
[11] -1 0 0xcfe80000 - 0xcfefffff (0x80000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x000014f0 - 0x000014ff (0x10) IX[B]
[18] -1 0 0x00001834 - 0x00001837 (0x4) IX[B]
[19] -1 0 0x00001820 - 0x00001827 (0x8) IX[B]
[20] -1 0 0x00001830 - 0x00001833 (0x4) IX[B]
[21] -1 0 0x00001818 - 0x0000181f (0x8) IX[B]
[22] -1 0 0x000014e0 - 0x000014ef (0x10) IX[B]
[23] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[24] -1 0 0x00000170 - 0x00000177 (0x8) IX[B]
[25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[27] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[28] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[29] -1 0 0x000014a0 - 0x000014bf (0x20) IX[B]
[30] -1 0 0x00001480 - 0x0000149f (0x20) IX[B]
[31] -1 0 0x00001460 - 0x0000147f (0x20) IX[B]
[32] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[33] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915G
(--) intel(0): Chipset: "915G"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xCFE00000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(==) intel(0): Enabling EXA render acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output VGA disconnected
(EE) intel(0): No valid modes.
(II) UnloadModule: "intel"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/lib/xorg/modules//libvgahw.so
(II) UnloadModule: "vbe"
(II) Unloading /usr/lib/xorg/modules//libvbe.so
(II) UnloadModule: "int10"
(II) Unloading /usr/lib/xorg/modules//libint10.so
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
... would be nice if someone could look into this :) ...
Cheers,
Pierre Bauduin
http://pierre.baudu.in/
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-15) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Mar 26 01:08:11 UTC 2009
** Command line:
initrd=/live/initrd1.img boot=live quickreboot locale=fr_BE.UTF-8 keyb=be2-latin1 hostname=debian-live union=aufs BOOT_IMAGE=/live/vmlinuz1
** Not tainted
** Kernel log:
[ 4.532960] ata2: SATA max UDMA/133 cmd 0x1820 ctl 0x1834 bmdma 0x14f8 irq 19
[ 4.711956] ata1.00: ATA-7: WDC WD800JD-60JRC0, 05.01C05, max UDMA/100
[ 4.711956] ata1.00: 156301488 sectors, multi 16: LBA
[ 4.711956] ata1.00: configured for UDMA/100
[ 4.954101] scsi 1:0:0:0: Direct-Access ATA WDC WD800JD-60JR 05.0 PQ: 0 ANSI: 5
[ 5.082099] Driver 'sd' needs updating - please use bus_type methods
[ 5.082099] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.082099] sd 1:0:0:0: [sda] Write Protect is off
[ 5.082099] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.082168] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.082301] sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.082366] sd 1:0:0:0: [sda] Write Protect is off
[ 5.082410] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.082449] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.082508] sda: sda1 sda2 < sda5 >
[ 5.106102] sd 1:0:0:0: [sda] Attached SCSI disk
[ 5.402104] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 5.402104] ide_generic: I/O resource 0x1F0-0x1F7 not free.
[ 5.402104] ide_generic: I/O resource 0x170-0x177 not free.
[ 5.478852] NTFS driver 2.1.29 [Flags: R/W MODULE].
[ 5.518792] NTFS volume version 3.1.
[ 5.597900] NTFS volume version 3.1.
[ 6.907669] NTFS volume version 3.1.
[ 6.952748] NTFS volume version 3.1.
[ 8.029398] NTFS volume version 3.1.
[ 8.058833] NTFS volume version 3.1.
[ 9.141676] NTFS volume version 3.1.
[ 9.169675] NTFS volume version 3.1.
[ 9.877884] usb-storage: device scan complete
[ 9.881282] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 9.882284] sd 0:0:0:0: [sdb] 3926016 512-byte hardware sectors (2010 MB)
[ 9.882284] sd 0:0:0:0: [sdb] Write Protect is off
[ 9.882284] sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 9.882284] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 9.886285] sd 0:0:0:0: [sdb] 3926016 512-byte hardware sectors (2010 MB)
[ 9.886285] sd 0:0:0:0: [sdb] Write Protect is off
[ 9.886285] sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 9.886285] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 9.886285] sdb: sdb1
[ 9.886285] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[ 10.250093] NTFS volume version 3.1.
[ 10.278724] NTFS volume version 3.1.
[ 10.431309] aufs 20080714
[ 10.452527] loop: module loaded
[ 10.524530] squashfs: version 3.3-CVS (2008/04/04) Phillip Lougher
[ 21.747944] udevd version 125 started
[ 23.100733] input: PC Speaker as /class/input/input1
[ 23.981111] Linux agpgart interface v0.103
[ 24.001893] agpgart: Detected an Intel 915G Chipset.
[ 24.005087] agpgart: Detected 7932K stolen memory.
[ 24.021086] agpgart: AGP aperture is 256M @ 0xe0000000
[ 24.030023] intel_rng: Firmware space is locked read-only. If you can't or
[ 24.030023] intel_rng: don't want to disable this in firmware setup, and if
[ 24.030023] intel_rng: you are certain that your system has a functional
[ 24.030023] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 24.306023] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 24.306023] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0xf860)
[ 24.306023] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 24.310027] input: Power Button (FF) as /class/input/input2
[ 24.415082] ACPI: Power Button (FF) [PWRF]
[ 24.415296] input: Power Button (CM) as /class/input/input3
[ 24.444972] ACPI: Power Button (CM) [PBTN]
[ 24.547165] ACPI: WMI: Mapper loaded
[ 24.603169] parport_pc 00:07: reported by Plug and Play ACPI
[ 24.603169] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 25.383178] input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
[ 25.479370] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 21
[ 25.479370] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 25.895691] intel8x0_measure_ac97_clock: measured 53830 usecs
[ 25.895742] intel8x0: clocking to 48000
[ 29.264496] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 29.264496] tg3: eth0: Flow control is off for TX and off for RX.
[ 63.528798] NET: Registered protocol family 10
[ 63.528798] lo: Disabled Privacy Extensions
[ 74.151627] eth0: no IPv6 routers present
[ 288.159060] usb 5-8: new high speed USB device using ehci_hcd and address 3
[ 288.292799] usb 5-8: configuration #1 chosen from 1 choice
[ 288.295046] scsi3 : SCSI emulation for USB Mass Storage devices
[ 288.326704] usb-storage: device found at 3
[ 288.326704] usb-storage: waiting for device to settle before scanning
[ 288.295046] usb 5-8: New USB device found, idVendor=1b1c, idProduct=0ab1
[ 288.295046] usb 5-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 288.295046] usb 5-8: Product: Flash Voyager
[ 288.295046] usb 5-8: Manufacturer: Corsair
[ 288.295046] usb 5-8: SerialNumber: d7364f0145d365
[ 293.349284] usb-storage: device scan complete
[ 293.352739] scsi 3:0:0:0: Direct-Access Corsair Flash Voyager 0.00 PQ: 0 ANSI: 2
[ 293.353741] sd 3:0:0:0: [sdc] 31588352 512-byte hardware sectors (16173 MB)
[ 293.353741] sd 3:0:0:0: [sdc] Write Protect is off
[ 293.353741] sd 3:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 293.353741] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 293.357743] sd 3:0:0:0: [sdc] 31588352 512-byte hardware sectors (16173 MB)
[ 293.357744] sd 3:0:0:0: [sdc] Write Protect is off
[ 293.357744] sd 3:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 293.357744] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 293.357744] sdc: sdc1
[ 293.485734] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 353.835060] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 353.835060] sd 0:0:0:0: Attached scsi generic sg1 type 0
[ 353.835060] sd 3:0:0:0: Attached scsi generic sg2 type 0
** Loaded modules:
Module Size Used by
sg 26964 0
ipv6 235364 16
snd_intel8x0 26268 0
snd_ac97_codec 88484 1 snd_intel8x0
ac97_bus 1728 1 snd_ac97_codec
snd_pcm_oss 32832 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62596 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 2660 0
serio_raw 4740 0
psmouse 32336 0
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18528 1 snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
parport_pc 22500 0
parport 30988 1 parport_pc
wmi 6440 0
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45604 10 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
button 6096 0
iTCO_wdt 9508 0
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_intel8x0,snd_pcm
rng_core 3940 0
intel_agp 22556 1
agpgart 28776 1 intel_agp
pcspkr 2432 0
evdev 8000 3
battery 10180 0
squashfs 36360 1
zlib_inflate 14144 1 squashfs
loop 12748 2
aufs 110896 1
exportfs 3904 1 aufs
nls_cp437 5568 2
vfat 9184 2
fat 40896 1 vfat
nls_utf8 1760 2
ntfs 185792 0
nls_base 6820 5 nls_cp437,vfat,fat,nls_utf8,ntfs
ide_generic 2464 0 [permanent]
sd_mod 22200 4
usb_storage 77024 2
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ata_piix 14180 0
ata_generic 4676 0
libata 140416 2 ata_piix,ata_generic
scsi_mod 129324 4 sg,sd_mod,usb_storage,libata
dock 8304 1 libata
floppy 47748 0
piix 6568 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 96136 4 ide_generic,ide_cd_mod,piix,ide_pci_generic
ehci_hcd 28396 0
uhci_hcd 18672 0
usbcore 118224 4 usb_storage,ehci_hcd,uhci_hcd
tg3 84708 0
thermal 15228 0
processor 32544 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:3006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company DC7100 SFF(DX878AV) [103c:3006]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at cfe00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at cff00000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation 82915G Integrated Graphics Controller [8086:2782] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:3006]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at cfe80000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=40, subordinate=40, sec-latency=0
Memory behind bridge: f0200000-f04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3006]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1440 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3006]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 1460 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3006]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 1480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3006]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 22
Region 4: I/O ports at 14a0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at cff40000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
Subsystem: Hewlett-Packard Company DC7100 SFF(DX878AV) [103c:3006]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 1000 [size=256]
Region 1: I/O ports at 1400 [size=64]
Region 2: Memory at cff40400 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at cff40600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:3006]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 14e0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company Device [103c:3006]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 1818 [size=8]
Region 1: I/O ports at 1830 [size=4]
Region 2: I/O ports at 1820 [size=8]
Region 3: I/O ports at 1834 [size=4]
Region 4: I/O ports at 14f0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
Subsystem: Hewlett-Packard Company DC7100 SFF(DX878AV) [103c:3006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores)
Locale: LANG=fr_BE.UTF-8, LC_CTYPE=fr_BE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
--- End Message ---
--- Begin Message ---
- To: Pierre Bauduin <pierre@baudu.in>, 525896-done@bugs.debian.org
- Subject: Re: Bug#525896: linux-image-2.6.26-2-686: GUI mode (X.org) does not start on a HP DC7100
- From: Julien Cristau <jcristau@debian.org>
- Date: Sun, 18 Apr 2010 19:36:18 +0200
- Message-id: <20100418173618.GA12467@patate.is-a-geek.org>
- In-reply-to: <20091011212504.GA17128@radis.liafa.jussieu.fr>
- References: <7cd7a3e80904290016k293d5f08p2857f15b5879881e@mail.gmail.com> <20091011212504.GA17128@radis.liafa.jussieu.fr>
On Sun, Oct 11, 2009 at 23:25:04 +0200, Julien Cristau wrote: > On Wed, Apr 29, 2009 at 09:16:48 +0200, Pierre Bauduin wrote: > > > Hi and thanks for your interest... > > > > Here's the /var/log/Xorg.log when I boot a Debian Live system based on > > Debian 5.0 (not 5.0.1) based on linux-image-2.6.26-1-686. In that case the > > GUI mode (X.org) does start on the HP DC7100: > > > Good to know that works. There shouldn't be any relevant software > difference between 5.0 and 5.0.1 though, so this seems weird. Your > non-working log shows that the VGA output is not detected by the driver, > whereas the working log shows the VGA output as connected. > Can you check that the cable is connected properly on both ends? Is the > monitor directly connected to the machine (not through a KVM or similar > device)? No reply, closing this bug. Cheers, JulienAttachment: signature.asc
Description: Digital signature
--- End Message ---