Your message dated Wed, 7 Apr 2010 15:34:36 +0200 with message-id <20100407133436.GF3082@radis.liafa.jussieu.fr> and subject line Re: Bug#576811: xserver-xorg-core: 'x11_options' in udev config is not honored after upgrade has caused the Debian Bug report #576811, regarding xserver-xorg-core: 'x11_options' in udev config is not honored after upgrade to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 576811: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=576811 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg-core: 'x11_options' in udev config is not honored after upgrade
- From: Roger <wenrui@gmail.com>
- Date: Wed, 07 Apr 2010 19:57:58 +0800
- Message-id: <[🔎] 20100407115758.6051.78939.reportbug@wwang29-mobl1.ccr.corp.intel.com>
Package: xserver-xorg-core Version: 2:1.7.6-2 Severity: normal Hello, I have x11_options configured for synaptics in /etc/udev/rules.d. After upgrade of this package those options don't work any more. I can confirm that 'x11_options' was left behind after checking debian patches in your git: http://git.debian.org/?p=pkg-xorg/xserver/xorg-server.git;a=blob;f=debian/patches/10-config-libudev-backend.diff;h=dd3137eeb5e6dee720c33cfe369dc17821fe3320;hb=6fffcdd564dde6db49707999037207888a6aa172 http://git.debian.org/?p=pkg-xorg/xserver/xorg-server.git;a=blob;f=debian/patches/15-keep-udev-x11-driver.diff;h=7aa8c0af1737d7b37ee6d9d04e924a82a989ca27;hb=6fffcdd564dde6db49707999037207888a6aa172 Would you please fix it? Thanks -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 Jun 25 2009 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1722172 Apr 6 01:16 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 1621 Jun 26 2009 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg #Section "InputDevice" # Identifier "Generic Keyboard" # Driver "kbd" # Option "XkbRules" "xorg" # Option "XkbModel" "pc104" # Option "XkbLayout" "us" #EndSection # #Section "InputDevice" # Identifier "Configured Mouse" # Driver "mouse" #EndSection # ##Section "InputDevice" ## Identifier "touchpad" ## Driver "synaptics" ## Option "UpDownScrolling" "true" ## Option "VertEdgeScroll" "true" ##EndSection # # Section "Monitor" Identifier "TV" Option "Ignore" "True" EndSection Section "Device" Identifier "Configured Video Device" Driver "intel" Option "monitor-TV" "TV" Option "monitor-LVDS" "Configured Monitor" #Option "AccelMethod" "UXA" Option "Tiling" "false" EndSection ## Section "Monitor" Identifier "Configured Monitor" EndSection # #Section "Screen" # Identifier "Default Screen" # Monitor "Configured Monitor" #EndSection Section "ServerFlags" Option "DontZap" "off" EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 30282 Sep 30 2009 /var/log/Xorg.20.log -rw-r--r-- 1 root root 28310 Mar 29 17:14 /var/log/Xorg.1.log -rw-r--r-- 1 root root 28863 Apr 7 19:46 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32.11-dsa-ia32 i686 Debian Current Operating System: Linux wwang29-mobl1 2.6.33.1 #1 SMP PREEMPT Mon Mar 29 14:29:24 CST 2010 i686 Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.33.1 root=/dev/hda2 ro acpi_os_name=Microsoft Windows quiet Build Date: 05 April 2010 05:10:30PM xorg-server 2:1.7.6-2 (Timo Aaltonen <tjaalton@ubuntu.com>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 7 17:00:43 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen Section". Using the first device section listed. (**) | |-->Device "Configured Video Device" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (**) Option "DontZap" "off" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81eb080 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2a02:103c:30c9 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe0400000/1048576, 0xd0000000/268435456, I/O @ 0x00002000/8 (--) PCI: (0:0:2:1) 8086:2a03:103c:30c9 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe0500000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.5.902, module version = 2.9.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale (II) Primary Device is: PCI 00@00:02:0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "Tiling" "false" (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM (--) intel(0): Chipset: "965GM" (II) intel(0): Output VGA1 has no monitor section (II) intel(0): Output LVDS1 has no monitor section (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 (II) intel(0): Output TV1 has no monitor section (II) intel(0): EDID for output VGA1 (II) intel(0): EDID for output LVDS1 (II) intel(0): Manufacturer: SEC Model: 4541 Serial#: 0 (II) intel(0): Year: 2007 Week: 0 (II) intel(0): EDID Version: 1.3 (II) intel(0): Digital Display Input (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16 (II) intel(0): Gamma: 2.20 (II) intel(0): No DPMS capabilities specified (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 69.3 MHz Image Size: 261 x 163 mm (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1415 h_border: 0 (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0 (II) intel(0): Unknown vendor-specific block f (II) intel(0): SAMSUNG (II) intel(0): LTN121W3-L01 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff004ca3414500000000 (II) intel(0): 00110103801a10780a87f594574f8c27 (II) intel(0): 27505400000001010101010101010101 (II) intel(0): 010101010101121b0087502010301030 (II) intel(0): 130005a3100000190000000f00000000 (II) intel(0): 00000000002387026401000000fe0053 (II) intel(0): 414d53554e470a2020202020000000fe (II) intel(0): 004c544e31323157332d4c30310a00b0 (II) intel(0): Not using default mode "320x175" (doublescan mode not supported) (II) intel(0): Not using default mode "320x200" (doublescan mode not supported) (II) intel(0): Not using default mode "360x200" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) (II) intel(0): Not using default mode "1024x768" (interlace mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions) (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions) (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "416x312" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) (II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions) (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions) (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) (II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions) (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions) (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking) (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) (II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions) (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions) (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) (II) intel(0): Printing probed modes for output LVDS1 (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1296 1344 1415 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz) (II) intel(0): EDID for output TV1 (II) intel(0): Output VGA1 disconnected (II) intel(0): Output LVDS1 connected (II) intel(0): Output TV1 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS1 using initial mode 1280x800 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (==) Depth 24 pixmap format is 32 bpp (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling disabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with untiled buffers. (II) intel(0): Untiled allocation successful. (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): No memory allocations (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (WW) intel(0): Option "monitor-TV" is not used (WW) intel(0): Option "monitor-LVDS" is not used (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 211 (II) config/udev: Adding input device Power Button (/dev/input/event2) (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.5, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event2" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device Video Bus (/dev/input/event3) (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event3" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device Lid Switch (/dev/input/event1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Sleep Button (/dev/input/event0) (**) Sleep Button: always reports core events (**) Sleep Button: Device: "/dev/input/event0" (II) Sleep Button: Found keys (II) Sleep Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9) (**) Logitech USB Receiver: always reports core events (**) Logitech USB Receiver: Device: "/dev/input/event9" (II) Logitech USB Receiver: Found 20 mouse buttons (II) Logitech USB Receiver: Found scroll wheel(s) (II) Logitech USB Receiver: Found relative axes (II) Logitech USB Receiver: Found x and y relative axes (II) Logitech USB Receiver: Configuring as mouse (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5 (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE) (II) Logitech USB Receiver: initialized for relative axes. (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10) (**) Logitech USB Receiver: always reports core events (**) Logitech USB Receiver: Device: "/dev/input/event10" (II) Logitech USB Receiver: Found 1 mouse buttons (II) Logitech USB Receiver: Found scroll wheel(s) (II) Logitech USB Receiver: Found relative axes (II) Logitech USB Receiver: Found absolute axes (II) Logitech USB Receiver: Found keys (II) Logitech USB Receiver: Configuring as mouse (II) Logitech USB Receiver: Configuring as keyboard (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5 (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "lv3:ralt_switch" (EE) Logitech USB Receiver: failed to initialize for relative axes. (II) Logitech USB Receiver: initialized for absolute axes. (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4) (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "lv3:ralt_switch" (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event5) (**) PS/2 Generic Mouse: always reports core events (**) PS/2 Generic Mouse: Device: "/dev/input/event5" (II) PS/2 Generic Mouse: Found 3 mouse buttons (II) PS/2 Generic Mouse: Found relative axes (II) PS/2 Generic Mouse: Found x and y relative axes (II) PS/2 Generic Mouse: Configuring as mouse (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE) (II) PS/2 Generic Mouse: initialized for relative axes. (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6) (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) Synaptics touchpad driver version 1.2.1 (**) Option "Device" "/dev/input/event6" (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 (II) SynPS/2 Synaptics TouchPad: buttons: left right double triple (--) SynPS/2 Synaptics TouchPad: touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 (--) SynPS/2 Synaptics TouchPad: touchpad found (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7) (**) HP WMI hotkeys: always reports core events (**) HP WMI hotkeys: Device: "/dev/input/event7" (II) HP WMI hotkeys: Found keys (II) HP WMI hotkeys: Configuring as keyboard (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "lv3:ralt_switch" (II) intel(0): EDID vendor "SEC", prod id 17729 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1296 1344 1415 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): EDID vendor "SEC", prod id 17729 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1296 1344 1415 800 801 804 816 -hsync -vsync (49.0 kHz) (II) intel(0): EDID vendor "SEC", prod id 17729 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1296 1344 1415 800 801 804 816 -hsync -vsync (49.0 kHz) (II) AIGLX: Suspending AIGLX clients for VT switch (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) intel(0): No memory allocations (II) intel(0): EDID vendor "SEC", prod id 17729 (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1296 1344 1415 800 801 804 816 -hsync -vsync (49.0 kHz) (--) SynPS/2 Synaptics TouchPad: touchpad found (II) Power Button: Device reopened after 1 attempts. (II) Video Bus: Device reopened after 1 attempts. (II) Sleep Button: Device reopened after 1 attempts. (II) Logitech USB Receiver: Device reopened after 1 attempts. (II) Logitech USB Receiver: Device reopened after 1 attempts. (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) PS/2 Generic Mouse: Device reopened after 1 attempts. (II) HP WMI hotkeys: Device reopened after 1 attempts. udev information: P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0 N: input/event0 S: char/13:64 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0 E: MAJOR=13 E: MINOR=64 E: DEVNAME=/dev/input/event0 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:64 E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1 N: input/event1 S: char/13:65 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1 E: MAJOR=13 E: MINOR=65 E: DEVNAME=/dev/input/event1 E: SUBSYSTEM=input E: ID_INPUT=1 E: DEVLINKS=/dev/char/13:65 P: /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input10/event10 N: input/event10 S: char/13:74 S: input/by-id/usb-Logitech_USB_Receiver-event-if01 S: input/by-path/pci-0000:00:1d.2-usb-0:2:1.1-event E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input10/event10 E: MAJOR=13 E: MINOR=74 E: DEVNAME=/dev/input/event10 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: ID_MODEL=USB_Receiver E: ID_MODEL_ENC=USB\x20Receiver E: ID_MODEL_ID=c526 E: ID_REVISION=0500 E: ID_SERIAL=Logitech_USB_Receiver E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030102:030000: E: ID_USB_INTERFACE_NUM=01 E: ID_USB_DRIVER=usbhid E: ID_PATH=pci-0000:00:1d.2-usb-0:2:1.1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:74 /dev/input/by-id/usb-Logitech_USB_Receiver-event-if01 /dev/input/by-path/pci-0000:00:1d.2-usb-0:2:1.1-event E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2 N: input/event2 S: char/13:66 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2 E: MAJOR=13 E: MINOR=66 E: DEVNAME=/dev/input/event2 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:66 E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3 N: input/event3 S: char/13:67 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3 E: MAJOR=13 E: MINOR=67 E: DEVNAME=/dev/input/event3 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:67 E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev P: /devices/platform/i8042/serio0/input/input4/event4 N: input/event4 S: char/13:68 S: input/by-path/platform-i8042-serio-0-event-kbd E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio0/input/input4/event4 E: MAJOR=13 E: MINOR=68 E: DEVNAME=/dev/input/event4 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-0 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:68 /dev/input/by-path/platform-i8042-serio-0-event-kbd E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev P: /devices/platform/i8042/serio1/input/input5/event5 N: input/event5 S: char/13:69 S: input/by-path/platform-i8042-serio-1-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio1/input/input5/event5 E: MAJOR=13 E: MINOR=69 E: DEVNAME=/dev/input/event5 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-1 E: x11_driver=evdev E: DEVLINKS=/dev/char/13:69 /dev/input/by-path/platform-i8042-serio-1-event-mouse P: /devices/platform/i8042/serio4/input/input6/event6 N: input/event6 S: char/13:70 S: input/by-path/platform-i8042-serio-4-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio4/input/input6/event6 E: MAJOR=13 E: MINOR=70 E: DEVNAME=/dev/input/event6 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_TOUCHPAD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-4 E: x11_driver=synaptics E: x11_options.VertEdgeScroll=true E: x11_options.TapButton1=1 E: DEVLINKS=/dev/char/13:70 /dev/input/by-path/platform-i8042-serio-4-event-mouse P: /devices/virtual/input/input7/event7 N: input/event7 S: char/13:71 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input7/event7 E: MAJOR=13 E: MINOR=71 E: DEVNAME=/dev/input/event7 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc105 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:71 E: XKBOPTIONS=lv3:ralt_switch E: x11_driver=evdev P: /devices/pci0000:00/0000:00:1b.0/input/input8/event8 N: input/event8 S: char/13:72 E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input8/event8 E: MAJOR=13 E: MINOR=72 E: DEVNAME=/dev/input/event8 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: DEVLINKS=/dev/char/13:72 P: /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input9/event9 N: input/event9 S: char/13:73 S: input/by-id/usb-Logitech_USB_Receiver-event-mouse S: input/by-path/pci-0000:00:1d.2-usb-0:2:1.0-event-mouse E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input9/event9 E: MAJOR=13 E: MINOR=73 E: DEVNAME=/dev/input/event9 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_VENDOR=Logitech E: ID_VENDOR_ENC=Logitech E: ID_VENDOR_ID=046d E: ID_MODEL=USB_Receiver E: ID_MODEL_ENC=USB\x20Receiver E: ID_MODEL_ID=c526 E: ID_REVISION=0500 E: ID_SERIAL=Logitech_USB_Receiver E: ID_TYPE=hid E: ID_BUS=usb E: ID_USB_INTERFACES=:030102:030000: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usbhid E: ID_PATH=pci-0000:00:1d.2-usb-0:2:1.0 E: x11_driver=evdev E: DEVLINKS=/dev/char/13:73 /dev/input/by-id/usb-Logitech_USB_Receiver-event-mouse /dev/input/by-path/pci-0000:00:1d.2-usb-0:2:1.0-event-mouse DRM Information from dmesg: [ 0.507503] Linux agpgart interface v0.103 [ 0.507526] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 0.508488] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 0.515221] PM: Adding info for No Bus:agpgart [ 0.515646] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.515788] [drm] Initialized drm 1.1.0 20060810 [ 0.522681] [drm] set up 7M of stolen space [ 0.647983] [drm] initialized overlay support [ 1.312252] fbcon: inteldrmfb (fb0) is primary device [ 1.451886] fb0: inteldrmfb frame buffer device [ 1.459010] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1624.364240] agpgart-intel 0000:00:00.0: preparing suspend [ 1625.127631] drm card0-SVIDEO-1: legacy class suspend [ 1625.127636] drm card0-LVDS-1: legacy class suspend [ 1625.127652] drm card0-VGA-1: legacy class suspend [ 1625.127658] drm card0: legacy class suspend [ 1625.127662] drm controlD64: legacy class suspend [ 1625.364113] agpgart-intel 0000:00:00.0: suspend [ 1625.412211] agpgart-intel 0000:00:00.0: LATE suspend [ 1628.138259] agpgart-intel 0000:00:00.0: EARLY resume [ 1628.247538] agpgart-intel 0000:00:00.0: resume [ 1628.707972] drm controlD64: legacy class resume [ 1628.707976] drm card0: legacy class resume [ 1628.707983] drm card0-VGA-1: legacy class resume [ 1628.707991] drm card0-LVDS-1: legacy class resume [ 1628.707994] drm card0-SVIDEO-1: legacy class resume [ 1630.844692] agpgart-intel 0000:00:00.0: completing resume -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.33.1 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages xserver-xorg-core depends on: ii keyboard-configuration 1.54 system-wide keyboard preferences ii libaudit0 1.7.13-1+b1 Dynamic library for security audit ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib ii libdrm2 2.4.18-3 Userspace interface to kernel DRM ii libgcrypt11 1.4.5-2 LGPL Crypto library - runtime libr ii libpciaccess0 0.11.0-2 Generic PCI access library for X ii libpixman-1-0 0.16.4-1 pixel-manipulation library for X a ii libselinux1 2.0.94-1 SELinux runtime shared libraries ii libudev0 151-3 libudev shared library ii libxau6 1:1.0.5-2 X11 authorisation library ii libxdmcp6 1:1.0.3-2 X11 Display Manager Control Protoc ii libxfont1 1:1.4.1-2 X11 font rasterisation library ii udev 151-3 /dev/ and hotplug management daemo ii xserver-common 2:1.7.6-2 common files used by various X ser ii xserver-xorg 1:7.5+5 the X.Org X server Versions of packages xserver-xorg-core recommends: ii libgl1-mesa-dri 7.7.1-1 A free implementation of the OpenG Versions of packages xserver-xorg-core suggests: ii xfonts-100dpi 1:1.0.1 100 dpi fonts for X ii xfonts-75dpi 1:1.0.1 75 dpi fonts for X ii xfonts-scalable 1:1.0.1-1 scalable fonts for X -- no debconf information
--- End Message ---
--- Begin Message ---
- To: Roger <wenrui@gmail.com>, 576811-done@bugs.debian.org
- Subject: Re: Bug#576811: xserver-xorg-core: 'x11_options' in udev config is not honored after upgrade
- From: Julien Cristau <jcristau@debian.org>
- Date: Wed, 7 Apr 2010 15:34:36 +0200
- Message-id: <20100407133436.GF3082@radis.liafa.jussieu.fr>
- In-reply-to: <[🔎] 20100407115758.6051.78939.reportbug@wwang29-mobl1.ccr.corp.intel.com>
- References: <[🔎] 20100407115758.6051.78939.reportbug@wwang29-mobl1.ccr.corp.intel.com>
On Wed, Apr 7, 2010 at 19:57:58 +0800, Roger wrote: > I have x11_options configured for synaptics in /etc/udev/rules.d. > > After upgrade of this package those options don't work any more. > > I can confirm that 'x11_options' was left behind after checking > debian patches in your git: > http://git.debian.org/?p=pkg-xorg/xserver/xorg-server.git;a=blob;f=debian/patches/10-config-libudev-backend.diff;h=dd3137eeb5e6dee720c33cfe369dc17821fe3320;hb=6fffcdd564dde6db49707999037207888a6aa172 > http://git.debian.org/?p=pkg-xorg/xserver/xorg-server.git;a=blob;f=debian/patches/15-keep-udev-x11-driver.diff;h=7aa8c0af1737d7b37ee6d9d04e924a82a989ca27;hb=6fffcdd564dde6db49707999037207888a6aa172 > > Would you please fix it? > No. x11_options in udev was never a documented or recommended configuration. It's gone and will not come back. Look for "InputClass" in the xorg.conf manpage for how to set options in xorg.conf. Cheers, JulienAttachment: signature.asc
Description: Digital signature
--- End Message ---