Bug#576751: xserver-xorg: xserver crashes sometimes when running with external monitor

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: Bug#576751: xserver-xorg: xserver crashes sometimes when running with external monitor
From: Thiemo Nagel <thiemo.nagel@googlemail.com>
Date: Wed, 07 Apr 2010 00:24:15 +0200
Message-id: <[🔎] 20100406222415.11296.63032.reportbug@eee.nestnet>
Reply-to: Thiemo Nagel <thiemo.nagel@googlemail.com>, 576751@bugs.debian.org

Package: xserver-xorg
Version: 1:7.5+5
Severity: normal

I'm seeing these crashes when working on an external monitor connected to my
Eee PC 1000HG.  I'd estimate the frequency at which I have encountered this
problem at approx. once every 4 hours.  I still have to find out if there is a
specific action that triggers it.

Logfile is attached.  If there are any further questions, just ask!

Cheers!

Thiemo

-- Package-specific info:
/var/lib/x11/X.roster does not exist.

/var/lib/x11/X.md5sum does not exist.

X server symlink status:
lrwxrwxrwx 1 root root 13 May 29  2009 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1712764 Mar 23 23:13 /usr/bin/Xorg

/var/lib/x11/xorg.conf.roster does not exist.

VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)

/var/lib/x11/xorg.conf.md5sum does not exist.

Xorg X server configuration file status:
-rw-r--r-- 1 root root 1701 Feb  4 20:06 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"synaptics"
        Option          "Device"                "/dev/input/mouse0"
        Option          "Protocol"              "auto-dev"
        Option          "SHMConfig"             "true"
        Option          "VertTwoFingerScroll"   "1"
        Option          "HorizTwoFingerScroll"  "1"
        Option          "TapButton1"            "1"
        Option          "TapButton2"            "3"
        Option          "TapButton3"            "2"	
EndSection

Section "Device"
	Identifier	"Configured Video Device"
#	Driver		"vesa"
	Option		"UseFBDev"			"true"
	Option		"FramebufferCompression"	"on"
	Option		"AccelMethod"			"XAA"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
EndSection

Section "ServerFlags"
	Option		"DontZap"	"false"
EndSection


Xorg X server log files on system:
-rw-r--r-- 1 root root 37302 Apr  4 16:22 /var/log/Xorg.20.log
-rw-r--r-- 1 root root 52544 Apr  7 00:18 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.10-dsa-ia32 i686 Debian
Current Operating System: Linux eee 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-trunk-686 root=/dev/mapper/sda7_crypt ro vga=6 quiet
Build Date: 23 March 2010  10:07:02PM
xorg-server 2:1.7.6-1 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr  6 23:43:01 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
	Using the first device section listed.
(**) |   |-->Device "Configured Video Device"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81e7be0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:27ae:1043:8340 Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xf7f00000/524288, 0xd0000000/268435456, 0xf7ec0000/262144, I/O @ 0x0000dc00/8
(--) PCI: (0:0:2:1) 8086:27a6:1043:8340 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xf7f80000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.5.902, module version = 2.9.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "FramebufferCompression" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
(--) intel(0): Chipset: "945GME"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF7F00000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: HSD  Model: 3e9  Serial#: 4315
(II) intel(0): Year: 2009  Week: 18
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 22  vert.: 13
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.604 redY: 0.367   greenX: 0.363 greenY: 0.566
(II) intel(0): blueX: 0.156 blueY: 0.128   whiteX: 0.310 whiteY: 0.330
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 51.0 MHz   Image Size:  220 x 129 mm
(II) intel(0): h_active: 1024  h_sync: 1117  h_sync_end 1152 h_blank_end 1230 h_border: 0
(II) intel(0): v_active: 600  v_sync: 617  v_sync_end 622 v_blanking: 638 v_border: 0
(II) intel(0): Ranges: V min: 55 V max: 65 Hz, H min: 34 H max: 41 kHz, PixClock max 51 MHz
(II) intel(0): Monitor name: HSD100IFW1
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff002264e903db100000
(II) intel(0): 	1213010380160d780a80369a5e5d9128
(II) intel(0): 	204f5400000001010101010101010101
(II) intel(0): 	010101010101ec1300ce405826205d23
(II) intel(0): 	1504dc8100000019000000fd00374122
(II) intel(0): 	2905000a202020202020000000fc0048
(II) intel(0): 	5344313030494657310a202000000010
(II) intel(0): 	000a2020202020202020202020200014
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): found backlight control method /sys/class/backlight/eeepc
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: MAX  Model: 778  Serial#: 14801458
(II) intel(0): Year: 2005  Week: 4
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) intel(0): Sync:  Separate
(II) intel(0): Max Image Size [cm]: horiz.: 37  vert.: 30
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x864@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 83 kHz,
(II) intel(0): Monitor name: Belinea
(II) intel(0): Monitor name: 101920
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff003438780732dae100
(II) intel(0): 	040f010308251e78eaee95a3544c9926
(II) intel(0): 	0f5054a7ef8081800101010101010101
(II) intel(0): 	010101010101302a009851002a403070
(II) intel(0): 	1300782d1100001e000000fd00384b1f
(II) intel(0): 	53ff000a202020202020000000fc0042
(II) intel(0): 	656c696e6561200a20202020000000fc
(II) intel(0): 	003130313932300a20202020202000d5
(II) intel(0): EDID vendor "MAX", prod id 1912
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "MAX", prod id 1912
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: HSD  Model: 3e9  Serial#: 4315
(II) intel(0): Year: 2009  Week: 18
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 22  vert.: 13
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): GTF timings supported
(II) intel(0): redX: 0.604 redY: 0.367   greenX: 0.363 greenY: 0.566
(II) intel(0): blueX: 0.156 blueY: 0.128   whiteX: 0.310 whiteY: 0.330
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 51.0 MHz   Image Size:  220 x 129 mm
(II) intel(0): h_active: 1024  h_sync: 1117  h_sync_end 1152 h_blank_end 1230 h_border: 0
(II) intel(0): v_active: 600  v_sync: 617  v_sync_end 622 v_blanking: 638 v_border: 0
(II) intel(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 51 MHz
(II) intel(0): Monitor name: HSD100IFW1
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff002264e903db100000
(II) intel(0): 	1213010380160d780a80369a5e5d9128
(II) intel(0): 	204f5400000001010101010101010101
(II) intel(0): 	010101010101ec1300ce405826205d23
(II) intel(0): 	1504dc8100000019000000fd00374122
(II) intel(0): 	2905000a202020202020000000fc0048
(II) intel(0): 	5344313030494657310a202000000010
(II) intel(0): 	000a2020202020202020202020200014
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "832x624" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x600"x65.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output VGA using initial mode 800x600
(II) intel(0): Output LVDS using initial mode 800x600
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (370, 300) mm
(**) intel(0): DPI set to (54, 50)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000202 to 0x80000242
(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS VBLANK_INT_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 235520 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 942076 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane B is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "UseFBDev" is not used
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 211 x 158
(II) config/udev: Adding input device "Power Button" (/dev/input/event4)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event4"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Video Bus" (/dev/input/event5)
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event5"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Power Button" (/dev/input/event3)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event3"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event2)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event2"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "LITEON Technology USB Multimedia Keyboard" (/dev/input/event11)
(**) "LITEON Technology USB Multimedia Keyboard": always reports core events
(**) "LITEON Technology USB Multimedia Keyboard": Device: "/dev/input/event11"
(II) "LITEON Technology USB Multimedia Keyboard": Found keys
(II) "LITEON Technology USB Multimedia Keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""LITEON Technology USB Multimedia Keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Logitech USB Laser Mouse" (/dev/input/event8)
(**) "Logitech USB Laser Mouse": always reports core events
(**) "Logitech USB Laser Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Laser Mouse": Found 12 mouse buttons
(II) "Logitech USB Laser Mouse": Found scroll wheel(s)
(II) "Logitech USB Laser Mouse": Found relative axes
(II) "Logitech USB Laser Mouse": Found x and y relative axes
(II) "Logitech USB Laser Mouse": Configuring as mouse
(**) "Logitech USB Laser Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Laser Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Laser Mouse"" (type: MOUSE)
(**) "Logitech USB Laser Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Laser Mouse": (accel) acceleration profile 0
(II) "Logitech USB Laser Mouse": initialized for relative axes.
(II) config/udev: Adding input device "CNF7129" (/dev/input/event9)
(**) "CNF7129": always reports core events
(**) "CNF7129": Device: "/dev/input/event9"
(II) "CNF7129": Found keys
(II) "CNF7129": Configuring as keyboard
(II) XINPUT: Adding extended input device ""CNF7129"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Asus EeePC extra buttons" (/dev/input/event6)
(**) "Asus EeePC extra buttons": always reports core events
(**) "Asus EeePC extra buttons": Device: "/dev/input/event6"
(II) "Asus EeePC extra buttons": Found keys
(II) "Asus EeePC extra buttons": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Asus EeePC extra buttons"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event0)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event0"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "ETPS/2 Elantech Touchpad" (/dev/input/event7)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 1.2.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event7"
(II) "ETPS/2 Elantech Touchpad": x-axis range 8 - 1144
(II) "ETPS/2 Elantech Touchpad": y-axis range 8 - 760
(II) "ETPS/2 Elantech Touchpad": device does not report pressure, will use touch data.
(II) "ETPS/2 Elantech Touchpad": finger width range 0 - 0
(II) "ETPS/2 Elantech Touchpad": buttons: left right middle double triple
(--) "ETPS/2 Elantech Touchpad": touchpad found
(**) "ETPS/2 Elantech Touchpad": always reports core events
(II) XINPUT: Adding extended input device ""ETPS/2 Elantech Touchpad"" (type: TOUCHPAD)
(**) "ETPS/2 Elantech Touchpad": (accel) keeping acceleration scheme 1
(**) "ETPS/2 Elantech Touchpad": (accel) acceleration profile 0
(--) "ETPS/2 Elantech Touchpad": touchpad found
(II) config/udev: Adding input device "ETPS/2 Elantech Touchpad" (/dev/input/mouse0)
(**) "ETPS/2 Elantech Touchpad": always reports core events
(**) "ETPS/2 Elantech Touchpad": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""ETPS/2 Elantech Touchpad""
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Allocate new frame buffer 2048x1024 stride 2048
(II) intel(0): New front buffer at 0x2800000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Allocate new frame buffer 1280x1024 stride 2048
(II) intel(0): New front buffer at 0x2000000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): Allocate new frame buffer 800x600 stride 1024
(II) intel(0): New front buffer at 0xec00000
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Allocate new frame buffer 1024x600 stride 1024
(II) intel(0): New front buffer at 0xe400000
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) config/udev: removing device "Logitech USB Laser Mouse"
(II) "Logitech USB Laser Mouse": Close
(II) UnloadModule: "evdev"
(II) config/udev: removing device "LITEON Technology USB Multimedia Keyboard"
(II) "LITEON Technology USB Multimedia Keyboard": Close
(II) UnloadModule: "evdev"
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane B is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(--) "ETPS/2 Elantech Touchpad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7129": Device reopened after 1 attempts.
(II) "Asus EeePC extra buttons": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane B is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(--) "ETPS/2 Elantech Touchpad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7129": Device reopened after 1 attempts.
(II) "Asus EeePC extra buttons": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001

udev information:
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: x11_driver=evdev
E: DMI_VENDOR=ASUSTeK Computer INC.

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1
N: input/event1
S: char/13:65
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=ASUSTeK Computer INC.
E: DEVLINKS=/dev/char/13:65

P: /devices/pci0000:00/0000:00:1b.0/input/input10/event10
N: input/event10
S: char/13:74
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=pci-0000:00:1b.0
E: DMI_VENDOR=ASUSTeK Computer INC.
E: DEVLINKS=/dev/char/13:74

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:66
E: x11_driver=evdev
E: DMI_VENDOR=ASUSTeK Computer INC.

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:67
E: x11_driver=evdev
E: DMI_VENDOR=ASUSTeK Computer INC.

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:68
E: x11_driver=evdev
E: DMI_VENDOR=ASUSTeK Computer INC.

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5
N: input/event5
S: char/13:69
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:69
E: x11_driver=evdev
E: DMI_VENDOR=ASUSTeK Computer INC.

P: /devices/platform/eeepc/input/input6/event6
N: input/event6
S: char/13:70
S: input/by-path/platform-eeepc-event
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/eeepc/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_PATH=platform-eeepc
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:70 /dev/input/by-path/platform-eeepc-event
E: x11_driver=evdev
E: DMI_VENDOR=ASUSTeK Computer INC.

P: /devices/platform/i8042/serio1/input/input7/event7
N: input/event7
S: char/13:71
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: x11_driver=synaptics
E: DMI_VENDOR=ASUSTeK Computer INC.
E: DEVLINKS=/dev/char/13:71 /dev/input/by-path/platform-i8042-serio-1-event-mouse

P: /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9/event9
N: input/event9
S: char/13:73
S: input/by-id/usb-Chicony_Electronics_Co.__Ltd._CNF7129_SN0001-event-if00
S: input/by-path/pci-0000:00:1d.7-usb-0:8:1.0-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Chicony_Electronics_Co.__Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2c\x20Ltd.
E: ID_VENDOR_ID=04f2
E: ID_MODEL=CNF7129
E: ID_MODEL_ENC=CNF7129
E: ID_MODEL_ID=b071
E: ID_REVISION=1544
E: ID_SERIAL=Chicony_Electronics_Co.__Ltd._CNF7129_SN0001
E: ID_SERIAL_SHORT=SN0001
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1d.7-usb-0:8:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:73 /dev/input/by-id/usb-Chicony_Electronics_Co.__Ltd._CNF7129_SN0001-event-if00 /dev/input/by-path/pci-0000:00:1d.7-usb-0:8:1.0-event
E: x11_driver=evdev

DRM Information from dmesg:
[   20.407098] Linux agpgart interface v0.103
[   20.812046] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[   20.812503] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   20.818007] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   22.105845] [drm] Initialized drm 1.1.0 20060810
[   23.136499] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'proposed-updates'), (500, 'oldstable-proposed-updates'), (500, 'oldstable'), (500, 'stable'), (300, 'unstable'), (150, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages xserver-xorg depends on:
ii  libc6                 2.10.2-6           Embedded GNU C Library: Shared lib
ii  x11-xkb-utils         7.5+2              X11 XKB utilities
ii  xkb-data              1.8-1              X Keyboard Extension (XKB) configu
ii  xserver-xorg-core     2:1.7.6-1          Xorg X server - core server
ii  xserver-xorg-input-al 1:7.5+5            the X.Org X server -- input driver
ii  xserver-xorg-input-ev 1:2.3.2-4          X.Org X server -- evdev input driv
ii  xserver-xorg-input-kb 1:1.4.0-1          X.Org X server -- keyboard input d
ii  xserver-xorg-input-mo 1:1.5.0-1          X.Org X server -- mouse input driv
ii  xserver-xorg-input-sy 1.2.1-1            Synaptics TouchPad driver for X.Or
ii  xserver-xorg-input-wa 0.10.3+20100109-1  X.Org X server -- Wacom input driv
ii  xserver-xorg-video-ap 1:1.2.2-1          X.Org X server -- APM display driv
ii  xserver-xorg-video-ar 1:0.7.2-1          X.Org X server -- ark display driv
ii  xserver-xorg-video-ch 1:1.2.2-1          X.Org X server -- Chips display dr
ii  xserver-xorg-video-ci 1:1.3.2-1          X.Org X server -- Cirrus display d
ii  xserver-xorg-video-du 1:0.3.2-1          X.Org X server -- dummy display dr
ii  xserver-xorg-video-fb 1:0.4.1-1          X.Org X server -- fbdev display dr
ii  xserver-xorg-video-gl 1:1.2.4-1          X.Org X server -- Glint display dr
ii  xserver-xorg-video-i1 1:1.3.3-1          X.Org X server -- i128 display dri
ii  xserver-xorg-video-i7 1:1.3.2-1          X.Org X server -- i740 display dri
ii  xserver-xorg-video-in 2:2.9.1-3          X.Org X server -- Intel i8xx, i9xx
ii  xserver-xorg-video-ma 6.8.2-2            X.Org X server -- ATI Mach64 displ
ii  xserver-xorg-video-mg 1:1.4.11.dfsg-2    X.Org X server -- MGA display driv
ii  xserver-xorg-video-ne 1:1.2.4-2          X.Org X server -- Neomagic display
ii  xserver-xorg-video-op 1:0.2.904+svn827-1 X.Org X server -- VIA display driv
ii  xserver-xorg-video-r1 6.8.1-2            X.Org X server -- ATI r128 display
ii  xserver-xorg-video-ra 1.3.0-2            X.Org X server -- AMD/ATI r5xx, r6
ii  xserver-xorg-video-re 1:4.2.3-1          X.Org X server -- Rendition displa
ii  xserver-xorg-video-s3 1:0.6.3-1          X.Org X server -- legacy S3 displa
ii  xserver-xorg-video-s3 1:1.10.4-1         X.Org X server -- S3 ViRGE display
ii  xserver-xorg-video-sa 1:2.3.1-1          X.Org X server -- Savage display d
ii  xserver-xorg-video-si 1:1.7.3-1          X.Org X server -- SiliconMotion di
ii  xserver-xorg-video-si 1:0.9.3-1          X.Org X server -- SiS USB display 
ii  xserver-xorg-video-td 1:1.4.3-1          X.Org X server -- tdfx display dri
ii  xserver-xorg-video-tr 1:1.3.3-1          X.Org X server -- Trident display 
ii  xserver-xorg-video-ts 1:1.2.3-1          X.Org X server -- Tseng display dr
ii  xserver-xorg-video-v4 1:0.2.0-4          X.Org X server -- Video 4 Linux di
ii  xserver-xorg-video-ve 1:2.3.0-1          X.Org X server -- VESA display dri
ii  xserver-xorg-video-vm 1:10.16.9-1        X.Org X server -- VMware display d
ii  xserver-xorg-video-vo 1:1.2.3-1          X.Org X server -- Voodoo display d

Versions of packages xserver-xorg recommends:
ii  libgl1-mesa-dri               7.7-4      A free implementation of the OpenG

xserver-xorg suggests no packages.

-- no debconf information

X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-trunk-686 i686 Debian
Current Operating System: Linux eee 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-trunk-686 root=/dev/mapper/sda7_crypt ro vga=6 quiet
Build Date: 16 February 2010  08:37:23AM
xorg-server 2:1.7.5-1 (bgoglin@debian.org) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr  4 17:09:03 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
	Using the first device section listed.
(**) |   |-->Device "Configured Video Device"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81e7020
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:27ae:1043:8340 Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xf7f00000/524288, 0xd0000000/268435456, 0xf7ec0000/262144, I/O @ 0x0000dc00/8
(--) PCI: (0:0:2:1) 8086:27a6:1043:8340 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xf7f80000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.9.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "FramebufferCompression" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
(--) intel(0): Chipset: "945GME"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF7F00000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: HSD  Model: 3e9  Serial#: 4315
(II) intel(0): Year: 2009  Week: 18
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 22  vert.: 13
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.604 redY: 0.367   greenX: 0.363 greenY: 0.566
(II) intel(0): blueX: 0.156 blueY: 0.128   whiteX: 0.310 whiteY: 0.330
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 51.0 MHz   Image Size:  220 x 129 mm
(II) intel(0): h_active: 1024  h_sync: 1117  h_sync_end 1152 h_blank_end 1230 h_border: 0
(II) intel(0): v_active: 600  v_sync: 617  v_sync_end 622 v_blanking: 638 v_border: 0
(II) intel(0): Ranges: V min: 55 V max: 65 Hz, H min: 34 H max: 41 kHz, PixClock max 51 MHz
(II) intel(0): Monitor name: HSD100IFW1
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff002264e903db100000
(II) intel(0): 	1213010380160d780a80369a5e5d9128
(II) intel(0): 	204f5400000001010101010101010101
(II) intel(0): 	010101010101ec1300ce405826205d23
(II) intel(0): 	1504dc8100000019000000fd00374122
(II) intel(0): 	2905000a202020202020000000fc0048
(II) intel(0): 	5344313030494657310a202000000010
(II) intel(0): 	000a2020202020202020202020200014
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): found backlight control method /sys/class/backlight/eeepc
(II) intel(0): EDID for output VGA
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: HSD  Model: 3e9  Serial#: 4315
(II) intel(0): Year: 2009  Week: 18
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 22  vert.: 13
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): GTF timings supported
(II) intel(0): redX: 0.604 redY: 0.367   greenX: 0.363 greenY: 0.566
(II) intel(0): blueX: 0.156 blueY: 0.128   whiteX: 0.310 whiteY: 0.330
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 51.0 MHz   Image Size:  220 x 129 mm
(II) intel(0): h_active: 1024  h_sync: 1117  h_sync_end 1152 h_blank_end 1230 h_border: 0
(II) intel(0): v_active: 600  v_sync: 617  v_sync_end 622 v_blanking: 638 v_border: 0
(II) intel(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 51 MHz
(II) intel(0): Monitor name: HSD100IFW1
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff002264e903db100000
(II) intel(0): 	1213010380160d780a80369a5e5d9128
(II) intel(0): 	204f5400000001010101010101010101
(II) intel(0): 	010101010101ec1300ce405826205d23
(II) intel(0): 	1504dc8100000019000000fd00374122
(II) intel(0): 	2905000a202020202020000000fc0048
(II) intel(0): 	5344313030494657310a202000000010
(II) intel(0): 	000a2020202020202020202020200014
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "832x624" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1024x600"x65.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000242
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS VBLANK_INT_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 235520 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 942076 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane B is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "UseFBDev" is not used
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 158
(II) config/udev: Adding input device "Power Button" (/dev/input/event4)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event4"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Video Bus" (/dev/input/event5)
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event5"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Power Button" (/dev/input/event3)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event3"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event2)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event2"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Logitech USB Laser Mouse" (/dev/input/event8)
(**) "Logitech USB Laser Mouse": always reports core events
(**) "Logitech USB Laser Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Laser Mouse": Found 12 mouse buttons
(II) "Logitech USB Laser Mouse": Found scroll wheel(s)
(II) "Logitech USB Laser Mouse": Found relative axes
(II) "Logitech USB Laser Mouse": Found x and y relative axes
(II) "Logitech USB Laser Mouse": Configuring as mouse
(**) "Logitech USB Laser Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Laser Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Laser Mouse"" (type: MOUSE)
(**) "Logitech USB Laser Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Laser Mouse": (accel) acceleration profile 0
(II) "Logitech USB Laser Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB Laser Mouse" (/dev/input/mouse1)
(**) "Logitech USB Laser Mouse": always reports core events
(**) "Logitech USB Laser Mouse": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB Laser Mouse""
(II) config/udev: Adding input device "CNF7129" (/dev/input/event9)
(**) "CNF7129": always reports core events
(**) "CNF7129": Device: "/dev/input/event9"
(II) "CNF7129": Found keys
(II) "CNF7129": Configuring as keyboard
(II) XINPUT: Adding extended input device ""CNF7129"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Asus EeePC extra buttons" (/dev/input/event6)
(**) "Asus EeePC extra buttons": always reports core events
(**) "Asus EeePC extra buttons": Device: "/dev/input/event6"
(II) "Asus EeePC extra buttons": Found keys
(II) "Asus EeePC extra buttons": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Asus EeePC extra buttons"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event0)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event0"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "ETPS/2 Elantech Touchpad" (/dev/input/event7)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 1.2.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event7"
(II) "ETPS/2 Elantech Touchpad": x-axis range 8 - 1144
(II) "ETPS/2 Elantech Touchpad": y-axis range 8 - 760
(II) "ETPS/2 Elantech Touchpad": device does not report pressure, will use touch data.
(II) "ETPS/2 Elantech Touchpad": finger width range 0 - 0
(II) "ETPS/2 Elantech Touchpad": buttons: left right middle double triple
(--) "ETPS/2 Elantech Touchpad": touchpad found
(**) "ETPS/2 Elantech Touchpad": always reports core events
(II) XINPUT: Adding extended input device ""ETPS/2 Elantech Touchpad"" (type: TOUCHPAD)
(**) "ETPS/2 Elantech Touchpad": (accel) keeping acceleration scheme 1
(**) "ETPS/2 Elantech Touchpad": (accel) acceleration profile 0
(--) "ETPS/2 Elantech Touchpad": touchpad found
(II) config/udev: Adding input device "ETPS/2 Elantech Touchpad" (/dev/input/mouse0)
(**) "ETPS/2 Elantech Touchpad": always reports core events
(**) "ETPS/2 Elantech Touchpad": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""ETPS/2 Elantech Touchpad""
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane B is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(--) "ETPS/2 Elantech Touchpad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "Logitech USB Laser Mouse": Device reopened after 1 attempts.
(II) "CNF7129": Device reopened after 1 attempts.
(II) "Asus EeePC extra buttons": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) Open ACPI successful (/var/run/acpid.socket)
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) Open ACPI successful (/var/run/acpid.socket)
(II) config/udev: removing device "Logitech USB Laser Mouse"
(II) "Logitech USB Laser Mouse": Close
(II) UnloadModule: "evdev"
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) config/udev: Adding input device "Logitech USB Laser Mouse" (/dev/input/event8)
(**) "Logitech USB Laser Mouse": always reports core events
(**) "Logitech USB Laser Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Laser Mouse": Found 12 mouse buttons
(II) "Logitech USB Laser Mouse": Found scroll wheel(s)
(II) "Logitech USB Laser Mouse": Found relative axes
(II) "Logitech USB Laser Mouse": Found x and y relative axes
(II) "Logitech USB Laser Mouse": Configuring as mouse
(**) "Logitech USB Laser Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Laser Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Laser Mouse"" (type: MOUSE)
(**) "Logitech USB Laser Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Laser Mouse": (accel) acceleration profile 0
(II) "Logitech USB Laser Mouse": initialized for relative axes.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane B is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(--) "ETPS/2 Elantech Touchpad": touchpad found
(II) config/udev: removing device "Logitech USB Laser Mouse"
(II) "Logitech USB Laser Mouse": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7129": Device reopened after 1 attempts.
(II) "Asus EeePC extra buttons": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane B is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(--) "ETPS/2 Elantech Touchpad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7129": Device reopened after 1 attempts.
(II) "Asus EeePC extra buttons": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) config/udev: Adding input device "LITEON Technology USB Multimedia Keyboard" (/dev/input/event8)
(**) "LITEON Technology USB Multimedia Keyboard": always reports core events
(**) "LITEON Technology USB Multimedia Keyboard": Device: "/dev/input/event8"
(II) "LITEON Technology USB Multimedia Keyboard": Found keys
(II) "LITEON Technology USB Multimedia Keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""LITEON Technology USB Multimedia Keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Logitech USB Laser Mouse" (/dev/input/event11)
(**) "Logitech USB Laser Mouse": always reports core events
(**) "Logitech USB Laser Mouse": Device: "/dev/input/event11"
(II) "Logitech USB Laser Mouse": Found 12 mouse buttons
(II) "Logitech USB Laser Mouse": Found scroll wheel(s)
(II) "Logitech USB Laser Mouse": Found relative axes
(II) "Logitech USB Laser Mouse": Found x and y relative axes
(II) "Logitech USB Laser Mouse": Configuring as mouse
(**) "Logitech USB Laser Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Laser Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Laser Mouse"" (type: MOUSE)
(**) "Logitech USB Laser Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Laser Mouse": (accel) acceleration profile 0
(II) "Logitech USB Laser Mouse": initialized for relative axes.
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Allocate new frame buffer 1280x1024 stride 2048
(II) intel(0): New front buffer at 0x2000000
(II) intel(0): Allocate new frame buffer 2048x1024 stride 2048
(II) intel(0): New front buffer at 0x3800000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "MAX", prod id 1912
(II) intel(0): Allocate new frame buffer 800x600 stride 1024
(II) intel(0): New front buffer at 0xb800000
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Allocate new frame buffer 1024x600 stride 1024
(II) intel(0): New front buffer at 0x8800000
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) config/udev: removing device "LITEON Technology USB Multimedia Keyboard"
(II) "LITEON Technology USB Multimedia Keyboard": Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/udev: removing device "Logitech USB Laser Mouse"
(II) "Logitech USB Laser Mouse": Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane B is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(--) "ETPS/2 Elantech Touchpad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7129": Device reopened after 1 attempts.
(II) "Asus EeePC extra buttons": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane B is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(--) "ETPS/2 Elantech Touchpad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7129": Device reopened after 1 attempts.
(II) "Asus EeePC extra buttons": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane B is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(--) "ETPS/2 Elantech Touchpad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7129": Device reopened after 1 attempts.
(II) "Asus EeePC extra buttons": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000003f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000003fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000003fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000003fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane B is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(--) "ETPS/2 Elantech Touchpad": touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7129": Device reopened after 1 attempts.
(II) "Asus EeePC extra buttons": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) PM Event received: Capability Changed
I830PMEvent: Capability change
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Allocate new frame buffer 2048x1024 stride 2048
(II) intel(0): New front buffer at 0x2800000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "MAX", prod id 1912
(WW) EDID preferred timing clock 51.00MHz exceeds claimed max 50MHz, fixing
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0   51.00  1024 1117 1152 1230  600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Allocate new frame buffer 1280x1024 stride 2048
(II) intel(0): New front buffer at 0x4000000
(II) config/udev: Adding input device "Logitech USB Laser Mouse" (/dev/input/event8)
(**) "Logitech USB Laser Mouse": always reports core events
(**) "Logitech USB Laser Mouse": Device: "/dev/input/event8"
(II) "Logitech USB Laser Mouse": Found 12 mouse buttons
(II) "Logitech USB Laser Mouse": Found scroll wheel(s)
(II) "Logitech USB Laser Mouse": Found relative axes
(II) "Logitech USB Laser Mouse": Found x and y relative axes
(II) "Logitech USB Laser Mouse": Configuring as mouse
(**) "Logitech USB Laser Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB Laser Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB Laser Mouse"" (type: MOUSE)
(**) "Logitech USB Laser Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB Laser Mouse": (accel) acceleration profile 0
(II) "Logitech USB Laser Mouse": initialized for relative axes.
(II) config/udev: Adding input device "LITEON Technology USB Multimedia Keyboard" (/dev/input/event11)
(**) "LITEON Technology USB Multimedia Keyboard": always reports core events
(**) "LITEON Technology USB Multimedia Keyboard": Device: "/dev/input/event11"
(II) "LITEON Technology USB Multimedia Keyboard": Found keys
(II) "LITEON Technology USB Multimedia Keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""LITEON Technology USB Multimedia Keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x80e696b]
1: /usr/bin/X (0x8048000+0x60b75) [0x80a8b75]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb778a40c]
3: /usr/bin/X (VidModeGetGammaRampSize+0x40) [0x8171940]
4: /usr/lib/xorg/modules/extensions/libextmod.so (0xb73a0000+0x8646) [0xb73a8646]
5: /usr/bin/X (0x8048000+0x2b017) [0x8073017]
6: /usr/bin/X (0x8048000+0x1e95a) [0x806695a]
7: /lib/i686/cmov/libc.so.6 (__libc_start_main+0xe5) [0xb7499b55]
8: /usr/bin/X (0x8048000+0x1e541) [0x8066541]
Segmentation fault at address 0x16c

Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting


Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Video Bus": Close
(II) UnloadModule: "evdev"
(II) "Power Button": Close
(II) UnloadModule: "evdev"
(II) "Sleep Button": Close
(II) UnloadModule: "evdev"
(II) "CNF7129": Close
(II) UnloadModule: "evdev"
(II) "Asus EeePC extra buttons": Close
(II) UnloadModule: "evdev"
(II) "AT Translated Set 2 keyboard": Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) "Logitech USB Laser Mouse": Close
(II) UnloadModule: "evdev"
(II) "LITEON Technology USB Multimedia Keyboard": Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch

Reply to:

Follow-Ups:
- Bug#576751: xserver-xorg: xserver crashes sometimes when running with external monitor
  - From: Brice Goglin <Brice.Goglin@ens-lyon.org>

Prev by Date: Bug#544646: Weird .XCompose ssh -X behavior here, too
Next by Date: Bug#576753: empty username and passwd cause crash
Previous by thread: Bug#544646: Weird .XCompose ssh -X behavior here, too
Next by thread: Bug#576751: xserver-xorg: xserver crashes sometimes when running with external monitor
Index(es):
- Date
- Thread