Nouveau testing
Hi all, following this blog post [1] I tested the binary driver on my
hardware [2] with the 2.6.32-4 kernel and it works just fine. Will also
test with other kernels including vanilla and will keep you posted.
[1] http://ikibiki.org//blog/2010/03/30/We_need_you/
[2] see attachment
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-4-amd64 (Debian 2.6.32-10) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Mar 17 03:23:53 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-4-amd64 root=UUID=75a958d0-d176-489d-b89f-413850356145 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 007FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fef0000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fef0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fef0000 @ 8000-c000
[ 0.000000] RAMDISK: 37704000 - 37fefeed
[ 0.000000] ACPI: RSDP 00000000000f6400 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 000000007fef3000 00038 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: FACP 000000007fef3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: DSDT 000000007fef30c0 04582 (v01 GBT NVDAACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 000000007fef0000 00040
[ 0.000000] ACPI: SSDT 000000007fef7700 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 000000007fef7a00 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098)
[ 0.000000] ACPI: MCFG 000000007fef7a40 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: APIC 000000007fef7680 00072 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fef0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fef0000
[ 0.000000] NODE_DATA [000000000000a000 - 0000000000011fff]
[ 0.000000] bootmap [0000000000012000 - 0000000000021fdf] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fef0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001673a94] TEXT DATA BSS ==> [0001000000 - 0001673a94]
[ 0.000000] #3 [0037704000 - 0037fefeed] RAMDISK ==> [0037704000 - 0037fefeed]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [0001674000 - 000167410a] BRK ==> [0001674000 - 000167410a]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] found SMP MP-table at [ffff8800000f4a40] f4a40
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fef0
[ 0.000000] On node 0 totalpages: 523919
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 101 pages reserved
[ 0.000000] DMA zone: 3842 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7109 pages used for memmap
[ 0.000000] DMA32 zone: 512811 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10dea201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880001800000 s89880 r8192 d20712 u1048576
[ 0.000000] pcpu-alloc: s89880 r8192 d20712 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516653
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-4-amd64 root=UUID=75a958d0-d176-489d-b89f-413850356145 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ a1f4000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2050696k/2096064k available (3031k kernel code, 388k absent, 44980k reserved, 1879k data, 580k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2913.412 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5826.82 BogoMIPS (lpj=11653648)
[ 0.004025] Security Framework initialized
[ 0.004031] SELinux: Disabled at boot.
[ 0.004153] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005180] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005663] Mount-cache hash table entries: 256
[ 0.005801] Initializing cgroup subsys ns
[ 0.005804] Initializing cgroup subsys cpuacct
[ 0.005807] Initializing cgroup subsys devices
[ 0.005809] Initializing cgroup subsys freezer
[ 0.005811] Initializing cgroup subsys net_cls
[ 0.005832] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.005834] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.005836] CPU 0/0x0 -> Node 0
[ 0.005838] tseg: 007ff00000
[ 0.005839] CPU: Physical Processor ID: 0
[ 0.005841] CPU: Processor Core ID: 0
[ 0.005843] mce: CPU supports 5 MCE banks
[ 0.005855] using C1E aware idle routine
[ 0.005856] Performance Events: AMD PMU driver.
[ 0.005861] ... version: 0
[ 0.005862] ... bit width: 48
[ 0.005863] ... generic registers: 4
[ 0.005864] ... value mask: 0000ffffffffffff
[ 0.005866] ... max period: 00007fffffffffff
[ 0.005867] ... fixed-purpose events: 0
[ 0.005868] ... event mask: 000000000000000f
[ 0.006427] ACPI: Core revision 20090903
[ 0.014354] Setting APIC routing to flat
[ 0.014739] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054433] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 02
[ 0.056001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.140039] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 02
[ 0.140050] Brought up 2 CPUs
[ 0.140052] Total of 2 processors activated (11653.23 BogoMIPS).
[ 0.140230] CPU0 attaching sched-domain:
[ 0.140232] domain 0: span 0-1 level MC
[ 0.140234] groups: 0 1
[ 0.140238] CPU1 attaching sched-domain:
[ 0.140240] domain 0: span 0-1 level MC
[ 0.140242] groups: 1 0
[ 0.140368] devtmpfs: initialized
[ 0.143093] regulator: core version 0.5
[ 0.143143] NET: Registered protocol family 16
[ 0.143237] node 0 link 0: io port [1000, fffff]
[ 0.143239] TOM: 0000000080000000 aka 2048M
[ 0.143241] node 0 link 0: mmio [f0000000, f1ffffff]
[ 0.143244] node 0 link 0: mmio [a0000, bffff]
[ 0.143246] node 0 link 0: mmio [80000000, ffb7ffff]
[ 0.143248] bus: [00,ff] on node 0 link 0
[ 0.143250] bus: 00 index 0 io port: [0, ffff]
[ 0.143252] bus: 00 index 1 mmio: [80000000, fcffffffff]
[ 0.143254] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.143259] ACPI: bus type pci registered
[ 0.143320] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
[ 0.143323] PCI: MCFG area at f0000000 reserved in E820
[ 0.143888] PCI: Using MMCONFIG at f0000000 - f1ffffff
[ 0.143890] PCI: Using configuration type 1 for base access
[ 0.144269] bio: create slab <bio-0> at 0
[ 0.144819] ACPI: EC: Look up EC in DSDT
[ 0.150098] ACPI: Interpreter enabled
[ 0.150103] ACPI: (supports S0 S1 S4 S5)
[ 0.150118] ACPI: Using IOAPIC for interrupt routing
[ 0.155617] ACPI: No dock devices found.
[ 0.155693] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.155896] pci 0000:00:01.1: reg 10 io port: [0xe000-0xe03f]
[ 0.155904] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.155908] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.155925] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.155930] pci 0000:00:01.1: PME# disabled
[ 0.155974] pci 0000:00:02.0: reg 10 32bit mmio: [0xf6107000-0xf6107fff]
[ 0.155992] pci 0000:00:02.0: supports D1 D2
[ 0.155994] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.156004] pci 0000:00:02.0: PME# disabled
[ 0.156032] pci 0000:00:02.1: reg 10 32bit mmio: [0xf6108000-0xf61080ff]
[ 0.156055] pci 0000:00:02.1: supports D1 D2
[ 0.156056] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.156059] pci 0000:00:02.1: PME# disabled
[ 0.156088] pci 0000:00:06.0: reg 10 32bit mmio: [0xf6106000-0xf6106fff]
[ 0.156091] pci 0000:00:06.0: reg 14 io port: [0xc800-0xc807]
[ 0.156109] pci 0000:00:06.0: supports D1 D2
[ 0.156110] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.156114] pci 0000:00:06.0: PME# disabled
[ 0.156136] pci 0000:00:07.0: reg 10 32bit mmio: [0xf6100000-0xf6103fff]
[ 0.156158] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.156160] pci 0000:00:07.0: PME# disabled
[ 0.156218] pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f]
[ 0.156244] pci 0000:00:0a.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.156247] pci 0000:00:0a.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.156250] pci 0000:00:0a.0: reg 18 io port: [0x970-0x977]
[ 0.156253] pci 0000:00:0a.0: reg 1c io port: [0xb70-0xb73]
[ 0.156256] pci 0000:00:0a.0: reg 20 io port: [0xdc00-0xdc0f]
[ 0.156259] pci 0000:00:0a.0: reg 24 32bit mmio: [0xf6104000-0xf6105fff]
[ 0.156301] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.156303] pci 0000:00:0d.0: PME# disabled
[ 0.156404] pci 0000:01:0e.0: reg 10 32bit mmio: [0xf6004000-0xf60047ff]
[ 0.156409] pci 0000:01:0e.0: reg 14 32bit mmio: [0xf6000000-0xf6003fff]
[ 0.156437] pci 0000:01:0e.0: supports D1 D2
[ 0.156438] pci 0000:01:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.156441] pci 0000:01:0e.0: PME# disabled
[ 0.156463] pci 0000:00:08.0: transparent bridge
[ 0.156466] pci 0000:00:08.0: bridge 32bit mmio: [0xf6000000-0xf60fffff]
[ 0.156491] pci 0000:02:00.0: reg 10 32bit mmio: [0xf4000000-0xf4ffffff]
[ 0.156497] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.156503] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff]
[ 0.156508] pci 0000:02:00.0: reg 24 io port: [0xb000-0xb07f]
[ 0.156512] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.164050] pci 0000:00:0d.0: bridge io port: [0xb000-0xbfff]
[ 0.164052] pci 0000:00:0d.0: bridge 32bit mmio: [0xf2000000-0xf5ffffff]
[ 0.164055] pci 0000:00:0d.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.164062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.164217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.187036] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
[ 0.187132] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.187225] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
[ 0.187315] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.187406] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.187497] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.187588] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.187682] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.187774] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.187866] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.187958] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 0.188058] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0
[ 0.188149] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0
[ 0.188243] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.188334] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 0.188425] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188518] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.188610] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188702] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.188829] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.188950] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.189072] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.189193] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.189315] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.189437] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.189558] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.189679] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.189801] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[ 0.189923] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
[ 0.190046] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
[ 0.190169] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
[ 0.190292] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.190418] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.190540] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.190662] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.190784] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.190907] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.191029] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.191126] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.191128] vgaarb: loaded
[ 0.191199] PCI: Using ACPI for IRQ routing
[ 0.191326] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.191330] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.196009] Switching to clocksource hpet
[ 0.196949] pnp: PnP ACPI init
[ 0.196968] ACPI: bus type pnp registered
[ 0.199786] pnp: PnP ACPI: found 13 devices
[ 0.199788] ACPI: ACPI bus type pnp unregistered
[ 0.199798] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.199800] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.199803] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.199805] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.199807] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.199810] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.199814] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.199817] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.199819] system 00:02: ioport range 0x295-0x314 has been reserved
[ 0.199821] system 00:02: ioport range 0x290-0x294 has been reserved
[ 0.199827] system 00:0b: iomem range 0xf0000000-0xf1ffffff has been reserved
[ 0.199831] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved
[ 0.199833] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.199836] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.199838] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.199840] system 00:0c: iomem range 0x7fef0000-0x7fefffff could not be reserved
[ 0.199843] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.199845] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.199848] system 00:0c: iomem range 0x100000-0x7feeffff could not be reserved
[ 0.199850] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.199852] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.204594] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.204596] pci 0000:00:08.0: IO window: disabled
[ 0.204599] pci 0000:00:08.0: MEM window: 0xf6000000-0xf60fffff
[ 0.204601] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.204607] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
[ 0.204609] pci 0000:00:0d.0: IO window: 0xb000-0xbfff
[ 0.204612] pci 0000:00:0d.0: MEM window: 0xf2000000-0xf5ffffff
[ 0.204614] pci 0000:00:0d.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.204621] pci 0000:00:08.0: setting latency timer to 64
[ 0.204626] pci 0000:00:0d.0: setting latency timer to 64
[ 0.204629] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.204631] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.204633] pci_bus 0000:01: resource 1 mem: [0xf6000000-0xf60fffff]
[ 0.204635] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.204637] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.204639] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.204641] pci_bus 0000:02: resource 1 mem: [0xf2000000-0xf5ffffff]
[ 0.204643] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.204674] NET: Registered protocol family 2
[ 0.204780] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.205572] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.207396] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.207872] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.207875] TCP reno registered
[ 0.207968] NET: Registered protocol family 1
[ 0.233022] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.233068] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.233114] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.233167] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.233220] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.233237] pci 0000:02:00.0: Boot video device
[ 0.233286] Unpacking initramfs...
[ 0.410092] Freeing initrd memory: 9135k freed
[ 0.415426] audit: initializing netlink socket (disabled)
[ 0.415438] type=2000 audit(1269957785.412:1): initialized
[ 0.415634] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.416958] VFS: Disk quotas dquot_6.5.2
[ 0.417006] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.417085] msgmni has been set to 4023
[ 0.417266] alg: No test for stdrng (krng)
[ 0.417309] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.417311] io scheduler noop registered
[ 0.417313] io scheduler anticipatory registered
[ 0.417314] io scheduler deadline registered
[ 0.417346] io scheduler cfq registered (default)
[ 0.417445] alloc irq_desc for 24 on node 0
[ 0.417447] alloc kstat_irqs on node 0
[ 0.417457] pcieport 0000:00:0d.0: irq 24 for MSI/MSI-X
[ 0.417461] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.418725] Linux agpgart interface v0.103
[ 0.418764] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.418852] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.419103] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.419242] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.419289] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.419708] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.419719] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.419841] mice: PS/2 mouse device common for all mice
[ 0.419887] rtc_cmos 00:04: RTC can wake from S4
[ 0.419932] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.419963] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.419974] cpuidle: using governor ladder
[ 0.419976] cpuidle: using governor menu
[ 0.419980] No iBFT detected.
[ 0.420249] TCP cubic registered
[ 0.420344] NET: Registered protocol family 10
[ 0.420743] lo: Disabled Privacy Extensions
[ 0.420966] Mobile IPv6
[ 0.420969] NET: Registered protocol family 17
[ 0.421061] PM: Resume from disk failed.
[ 0.421067] registered taskstats version 1
[ 0.421306] rtc_cmos 00:04: setting system clock to 2010-03-30 14:03:06 UTC (1269957786)
[ 0.421351] Freeing unused kernel memory: 580k freed
[ 0.421650] Write protecting the kernel read-only data: 4176k
[ 0.437432] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.603573] SCSI subsystem initialized
[ 0.604770] usbcore: registered new interface driver usbfs
[ 0.604803] usbcore: registered new interface driver hub
[ 0.604828] usbcore: registered new device driver usb
[ 0.605651] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.605658] ACPI: Power Button [PWRB]
[ 0.605742] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.605744] ACPI: Power Button [PWRF]
[ 0.609547] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.609861] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 0.609868] alloc irq_desc for 23 on node 0
[ 0.609871] alloc kstat_irqs on node 0
[ 0.609881] forcedeth 0000:00:06.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 0.609886] forcedeth 0000:00:06.0: setting latency timer to 64
[ 0.610972] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 0.610974] alloc irq_desc for 18 on node 0
[ 0.610976] alloc kstat_irqs on node 0
[ 0.610979] firewire_ohci 0000:01:0e.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[ 0.622778] libata version 3.00 loaded.
[ 0.624363] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.680015] firewire_ohci: Added fw-ohci device 0000:01:0e.0, OHCI version 1.10
[ 1.129028] forcedeth 0000:00:06.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:7d:e8:8d:66
[ 1.129032] forcedeth 0000:00:06.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.129681] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[ 1.129686] alloc irq_desc for 22 on node 0
[ 1.129688] alloc kstat_irqs on node 0
[ 1.129695] ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 1.129715] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.129717] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.129750] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.129778] ehci_hcd 0000:00:02.1: debug port 1
[ 1.129785] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.129803] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6108000
[ 1.140014] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.140035] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.140037] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.140039] usb usb1: Product: EHCI Host Controller
[ 1.140041] usb usb1: Manufacturer: Linux 2.6.32-4-amd64 ehci_hcd
[ 1.140042] usb usb1: SerialNumber: 0000:00:02.1
[ 1.140123] usb usb1: configuration #1 chosen from 1 choice
[ 1.140151] hub 1-0:1.0: USB hub found
[ 1.140158] hub 1-0:1.0: 10 ports detected
[ 1.140268] pata_amd 0000:00:09.0: version 0.4.1
[ 1.140308] pata_amd 0000:00:09.0: setting latency timer to 64
[ 1.140436] scsi0 : pata_amd
[ 1.140527] scsi1 : pata_amd
[ 1.141024] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.141027] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.141208] ahci 0000:00:0a.0: version 3.0
[ 1.141432] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 1.141436] alloc irq_desc for 21 on node 0
[ 1.141438] alloc kstat_irqs on node 0
[ 1.141444] ahci 0000:00:0a.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
[ 1.141473] alloc irq_desc for 25 on node 0
[ 1.141475] alloc kstat_irqs on node 0
[ 1.141480] ahci 0000:00:0a.0: irq 25 for MSI/MSI-X
[ 1.141532] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 1.141536] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pmp pio ccc
[ 1.141538] ahci 0000:00:0a.0: setting latency timer to 64
[ 1.141942] scsi2 : ahci
[ 1.142042] scsi3 : ahci
[ 1.142095] scsi4 : ahci
[ 1.142148] scsi5 : ahci
[ 1.142258] ata3: SATA max UDMA/133 abar m8192@0xf6104000 port 0xf6104100 irq 25
[ 1.142260] ata4: SATA max UDMA/133 abar m8192@0xf6104000 port 0xf6104180 irq 25
[ 1.142262] ata5: SATA max UDMA/133 abar m8192@0xf6104000 port 0xf6104200 irq 25
[ 1.142265] ata6: SATA max UDMA/133 abar m8192@0xf6104000 port 0xf6104280 irq 25
[ 1.181095] firewire_core: created device fw0: GUID 00dd54c100001d7d, S400
[ 1.205272] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.205593] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 20
[ 1.205597] alloc irq_desc for 20 on node 0
[ 1.205599] alloc kstat_irqs on node 0
[ 1.205606] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 20 (level, low) -> IRQ 20
[ 1.205624] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.205626] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.205641] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.205669] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf6107000
[ 1.262014] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.262016] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.262018] usb usb2: Product: OHCI Host Controller
[ 1.262020] usb usb2: Manufacturer: Linux 2.6.32-4-amd64 ohci_hcd
[ 1.262021] usb usb2: SerialNumber: 0000:00:02.0
[ 1.262096] usb usb2: configuration #1 chosen from 1 choice
[ 1.262125] hub 2-0:1.0: USB hub found
[ 1.262133] hub 2-0:1.0: 10 ports detected
[ 1.306956] ata2: port disabled. ignoring.
[ 1.460023] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.460030] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.624015] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.624024] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.625589] ata3.00: HPA detected: current 1465147055, native 1465149168
[ 1.625593] ata3.00: ATA-8: ST3750330AS, SD15, max UDMA/133
[ 1.625595] ata3.00: 1465147055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.627165] ata5.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
[ 1.627597] ata3.00: configured for UDMA/133
[ 1.631041] ata5.00: configured for UDMA/100
[ 1.636013] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 1.640102] scsi 2:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5
[ 1.758826] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
[ 1.765786] sd 2:0:0:0: [sda] 1465147055 512-byte logical blocks: (750 GB/698 GiB)
[ 1.765821] sd 2:0:0:0: [sda] Write Protect is off
[ 1.765823] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.765840] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.765938] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 1.842033] usb 2-2: New USB device found, idVendor=0566, idProduct=3108
[ 1.842035] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.842107] usb 2-2: configuration #1 chosen from 1 choice
[ 1.847393] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.856580] usbcore: registered new interface driver hiddev
[ 1.863353] input: HID 0566:3108 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4
[ 1.863416] generic-usb 0003:0566:3108.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0566:3108] on usb-0000:00:02.0-2/input0
[ 1.875142] input: HID 0566:3108 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input5
[ 1.875203] generic-usb 0003:0566:3108.0002: input,hidraw1: USB HID v1.10 Device [HID 0566:3108] on usb-0000:00:02.0-2/input1
[ 1.875230] usbcore: registered new interface driver usbhid
[ 1.875233] usbhid: v2.6:USB HID core driver
[ 2.176392] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.176396] Uniform CD-ROM driver Revision: 3.20
[ 2.176514] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.180055] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.180123] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.913968] device-mapper: uevent: version 1.0.3
[ 2.914099] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.985698] PM: Starting manual resume from disk
[ 2.985702] PM: Resume from partition 8:3
[ 2.985703] PM: Checking hibernation image.
[ 2.986040] PM: Error -22 checking image file
[ 2.986043] PM: Resume from disk failed.
[ 3.037326] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 3.933445] udev: starting version 151
[ 3.995238] processor LNXCPU:00: registered as cooling_device0
[ 3.995287] processor LNXCPU:01: registered as cooling_device1
[ 4.039427] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 4.039446] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[ 4.104746] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.198105] parport_pc 00:08: reported by Plug and Play ACPI
[ 4.198151] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.245645] EDAC MC: Ver: 2.1.0 Mar 17 2010
[ 4.359401] EDAC amd64_edac: Ver: 3.2.0 Mar 17 2010
[ 4.359480] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 4.359487] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.359488] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.359489] (Note that use of the override may cause unknown side effects.)
[ 4.359505] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 4.541032] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 4.541038] HDA Intel 0000:00:07.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
[ 4.541078] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 4.774319] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 5.100080] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input7
[ 5.614179] Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1 across:2096472k
[ 5.875830] loop: module loaded
[ 6.756823] kjournald starting. Commit interval 5 seconds
[ 6.757353] EXT3 FS on sda1, internal journal
[ 6.757357] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.771660] EXT4-fs (sda9): mounted filesystem with ordered data mode
[ 6.793290] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 6.803778] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 6.869058] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 6.918069] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 8.266557] fuse init (API version 7.13)
[ 8.521403] alloc irq_desc for 26 on node 0
[ 8.521406] alloc kstat_irqs on node 0
[ 8.521416] forcedeth 0000:00:06.0: irq 26 for MSI/MSI-X
[ 8.663400] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ processors (2 cpu cores) (version 2.20.00)
[ 8.663457] powernow-k8: 0 : fid 0x15 (2900 MHz), vid 0x8
[ 8.663459] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x9
[ 8.663461] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xb
[ 8.663463] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xd
[ 8.663464] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xf
[ 8.663466] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x11
[ 8.663468] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
[ 8.731056] kvm: Nested Virtualization enabled
[ 9.005018] Clocksource tsc unstable (delta = -217829737 ns)
[ 13.367057] [drm] Initialized drm 1.1.0 20060810
[ 13.572306] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[ 13.572312] alloc irq_desc for 16 on node 0
[ 13.572314] alloc kstat_irqs on node 0
[ 13.572322] nouveau 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[ 13.572327] nouveau 0000:02:00.0: setting latency timer to 64
[ 13.576163] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x086100a2)
[ 13.576780] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[ 13.630929] [drm] nouveau 0000:02:00.0: ... appears to be valid
[ 13.630932] [drm] nouveau 0000:02:00.0: BIT BIOS found
[ 13.630934] [drm] nouveau 0000:02:00.0: Bios version 60.86.34.00
[ 13.630937] [drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported
[ 13.630939] [drm] nouveau 0000:02:00.0: BIT table 'd' not found
[ 13.630941] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0
[ 13.630944] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 14 2
[ 13.630947] [drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 13.630949] [drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[ 13.630951] [drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 13.630953] [drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff
[ 13.630956] [drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff
[ 13.630958] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028
[ 13.630961] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 04011310 00000030
[ 13.630963] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 02011312 00020030
[ 13.630965] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 010223f1 00c0c080
[ 13.630973] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xBC41
[ 13.676117] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xBF5C
[ 13.712513] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xCB9E
[ 13.712531] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xCC90
[ 13.720116] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xCE73
[ 13.720124] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xCED8
[ 13.744030] [drm] nouveau 0000:02:00.0: 0xCED8: Condition still not met after 20ms, skipping following opcodes
[ 13.744048] [drm] nouveau 0000:02:00.0: 0xAED4: parsing output script 0
[ 13.744055] [drm] nouveau 0000:02:00.0: 0xA564: parsing output script 0
[ 13.831025] [TTM] Zone kernel: Available graphics memory: 1030206 kiB.
[ 13.831055] [drm] nouveau 0000:02:00.0: 256 MiB VRAM
[ 13.858664] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[ 13.859475] nouveau 0000:02:00.0: firmware: requesting nouveau/nv86.ctxprog
[ 14.008702] [drm] nouveau 0000:02:00.0: No ctxprog for NV86
[ 14.009782] [drm] nouveau 0000:02:00.0: Detected a DAC output
[ 14.009790] [drm] nouveau 0000:02:00.0: Detected a DAC output
[ 14.009796] [drm] nouveau 0000:02:00.0: Detected a TMDS output
[ 14.009802] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown
[ 14.009810] [drm] nouveau 0000:02:00.0: Detected a VGA connector
[ 14.009902] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector
[ 14.189031] [drm] nouveau 0000:02:00.0: allocated 1440x900 fb: 0x401c0000, bo ffff8800375e4400
[ 14.189493] Console: switching to colour frame buffer device 180x56
[ 14.189500] fb0: nouveaufb frame buffer device
[ 14.189502] registered panic notifier
[ 14.189507] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0
[ 14.908023] [drm] nouveau 0000:02:00.0: 0x0FAF: parsing clock script 0
[ 15.475029] lo: Disabled Privacy Extensions
[ 19.364009] eth0: no IPv6 routers present
Reply to: