Package: xserver-xorg-video-r128
Version: 6.8.1-2
Severity: normal
*** Please type your report below this line ***
attachment xorg.glx enabled dri/glx
Hi, Im having some problems with the xorg r128 driver.
When DRI is enabled the screen corrupts and becomes unresponsive, I
found a configuration online which will allow DRI to enable. As soon
as glxgears is started or any GL program the system will freeze
entirely.
Ive tried using debian stable, currently i switch to debian
unstable/experimental with the same results.
I do not know how to troubleshoot this but I will give you any
information I can.
I am attaching every relevant piece of information I can immediately
think of about the system I am using. As well as the configuration(s)
for xorg that I have tested.
the xorg.glx allows glx and dri.
the xorg.conf is the xorg.conf I have been tinkering with and may have
a lot of weird configurations in.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Dec 31 1969 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1927636 Feb 16 02:41 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 2481 Mar 6 09:59 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 58-62
VertRefresh 75-117
#ModeLine "1024x768" 78.75 1024 1044 1140 1328 768 781 784 820 +hsync +vsync
#ModeLine "800x600" 62.40 800 821 901 1040 600 609 612 644 +hsync +vsync
#Modeline "640x480" 49.90 640 657 721 832 480 481 484 514 +hsync +vsync
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
#Virtual 1024 768
EndSubSection
EndSection
Section "Module"
Disable "dri"
# Load "dri"
#Load "glx"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" "intl"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Option "CCEusecTimeout" "100000"
# BusType "PCI"
#Option "UseFBDev" "true"
EndSection
Section "Device"
Identifier "ATI Technologies Inc Radeon R250 [Mobility
FireGL 9000]"
Driver "r128"
BusID "PCI:0:16:0"
Option "UseFBDev" "false"
Option "AGPMode" "1"
Option "AGPFastWrite" "true"
# Option "EnablePageFlip" "true"
Option "RenderAccel" "true"
Option "AccelMethod" "exa"
Option "backingstore"
Option "UseFWPLL" "true"
Option "MergedFB" "true"
Option "CRT2Position" "Clone"
# Option "MetaModes" "1280x854 1024x768 800x600"
# Option "CloneMode" "1280x854"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 26972 Mar 7 19:00 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-powerpc64 ppc64 Debian
Current Operating System: Linux iMac 2.6.32-2-powerpc #1 Fri Feb 12
00:17:00 UTC 2010 ppc
Kernel command line: root=/dev/hda3 ro quiet splash vga=773
Build Date: 16 February 2010 10:32:10AM
xorg-server 2:1.7.5-1 (buildd@)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 7 19:00:18 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/100dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x101e3cf8
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:16:0) 1002:524c:1002:524c ATI Technologies Inc Rage 128
RL/VR AGP rev 0, Mem @ 0x94000000/67108864, 0x90000000/16384, I/O @
0x00000400/256, BIOS @ 0x????????/131072
(WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded even though the default is to disable it.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched ati for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 6.12.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) Primary Device is: PCI 00@00:10:0
(II) R128(0): PCI bus 0 card 16 func 0
(**) R128(0): Depth 16, (--) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "CCEusecTimeout" "100000"
(II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(**) R128(0): Using framebuffer device
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(--) R128(0): Chipset: "ATI Rage 128 VR RL (AGP)" (ChipID = 0x524c)
(--) R128(0): Linear framebuffer at 0x94000000
(--) R128(0): MMIO registers at 0x90000000
(--) R128(0): VideoRAM: 8192 kByte (64-bit SDR SGRAM 2:1)
(**) R128(0): Using external CRT for display
(WW) R128(0): Failed to read PCI ROM!
(WW) R128(0): Video BIOS not found!
(II) R128(0): Primary Display == Type 1
(WW) R128(0): Can't determine panel dimensions, and none specified.
Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=26 min=12500 max=25000; xclk=5010
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): Configured Monitor: Using hsync range of 58.00-62.00 kHz
(II) R128(0): Configured Monitor: Using vrefresh range of 75.00-117.00 Hz
(II) R128(0): Clock range: 12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x175" (unknown reason)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x200" (unknown reason)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "360x200" (unknown reason)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x240" (unknown reason)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x240" (unknown reason)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x240" (unknown reason)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x240" (unknown reason)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "1024x768" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "576x432" (unknown reason)
(II) R128(0): Not using default mode "1280x960" (vrefresh out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x480" (unknown reason)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x480" (unknown reason)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x512" (unknown reason)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x512" (unknown reason)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x512" (unknown reason)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x600" (unknown reason)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x600" (unknown reason)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x600" (unknown reason)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x600" (unknown reason)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x600" (unknown reason)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "896x672" (unknown reason)
(II) R128(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "896x672" (unknown reason)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "928x696" (unknown reason)
(II) R128(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "928x696" (unknown reason)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x720" (unknown reason)
(II) R128(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x720" (unknown reason)
(II) R128(0): Not using default mode "832x624" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "416x312" (unknown reason)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "576x432" (unknown reason)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "576x432" (unknown reason)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "576x432" (unknown reason)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "576x432" (unknown reason)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "576x432" (unknown reason)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "576x432" (unknown reason)
(II) R128(0): Not using default mode "1360x768" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "680x384" (unknown reason)
(II) R128(0): Not using default mode "1360x768" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "680x384" (unknown reason)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "700x525" (unknown reason)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "700x525" (unknown reason)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "700x525" (unknown reason)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "700x525" (unknown reason)
(II) R128(0): Not using default mode "1440x900" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "720x450" (unknown reason)
(II) R128(0): Not using default mode "1600x1024" (vrefresh out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x512" (unknown reason)
(II) R128(0): Not using default mode "1680x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "840x525" (unknown reason)
(II) R128(0): Not using default mode "1680x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "840x525" (unknown reason)
(II) R128(0): Not using default mode "1680x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "840x525" (unknown reason)
(II) R128(0): Not using default mode "1680x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "840x525" (unknown reason)
(II) R128(0): Not using default mode "1680x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "840x525" (unknown reason)
(II) R128(0): Not using default mode "1920x1080" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x540" (unknown reason)
(II) R128(0): Not using default mode "1920x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x600" (unknown reason)
(II) R128(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x720" (unknown reason)
(II) R128(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "1024x768" (unknown reason)
(II) R128(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "1024x768" (unknown reason)
(II) R128(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "1024x768" (unknown reason)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(II) R128(0): Not using mode "640x480" (no mode of this name)
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) R128(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312
768 769 772 800 +hsync +vsync (60.0 kHz)
(==) R128(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) R128(0): Page flipping disabled
(!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(EE) R128(0): [dri] R128DRIScreenInit failed (libdri.a too old)
(II) R128(0): Memory manager initialized to (0,0) (1024,4096)
(II) R128(0): Reserved area from (0,768) to (1024,770)
(II) R128(0): Largest offscreen area available: 1024 x 3326
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
6 512x512 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 1540)
(II) R128(0): Largest offscreen area available: 1024 x 3324
(==) R128(0): DPMS enabled
(WW) R128(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device " USB Keyboard" (/dev/input/event2)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) " USB Keyboard": always reports core events
(**) " USB Keyboard": Device: "/dev/input/event2"
(II) " USB Keyboard": Found keys
(II) " USB Keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device "" USB Keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device " USB Keyboard" (/dev/input/event3)
(**) " USB Keyboard": always reports core events
(**) " USB Keyboard": Device: "/dev/input/event3"
(II) " USB Keyboard": Found keys
(II) " USB Keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device "" USB Keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Logitech USB-PS/2 Optical
Mouse" (/dev/input/event4)
(**) "Logitech USB-PS/2 Optical Mouse": always reports core events
(**) "Logitech USB-PS/2 Optical Mouse": Device: "/dev/input/event4"
(II) "Logitech USB-PS/2 Optical Mouse": Found 3 mouse buttons
(II) "Logitech USB-PS/2 Optical Mouse": Found scroll wheel(s)
(II) "Logitech USB-PS/2 Optical Mouse": Found relative axes
(II) "Logitech USB-PS/2 Optical Mouse": Found x and y relative axes
(II) "Logitech USB-PS/2 Optical Mouse": Configuring as mouse
(**) "Logitech USB-PS/2 Optical Mouse": YAxisMapping: buttons 4 and 5
(**) "Logitech USB-PS/2 Optical Mouse": EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech USB-PS/2 Optical
Mouse"" (type: MOUSE)
(**) "Logitech USB-PS/2 Optical Mouse": (accel) keeping acceleration scheme 1
(**) "Logitech USB-PS/2 Optical Mouse": (accel) acceleration profile 0
(II) "Logitech USB-PS/2 Optical Mouse": initialized for relative axes.
(II) config/udev: Adding input device "Logitech USB-PS/2 Optical
Mouse" (/dev/input/mouse1)
(**) "Logitech USB-PS/2 Optical Mouse": always reports core events
(**) "Logitech USB-PS/2 Optical Mouse": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech USB-PS/2 Optical Mouse""
(II) config/udev: Adding input device "Macintosh mouse button
emulation" (/dev/input/event0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button
emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button
emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(II) config/udev: Adding input device "PMU" (/dev/input/event1)
(**) "PMU": always reports core events
(**) "PMU": Device: "/dev/input/event1"
(II) "PMU": Found keys
(II) "PMU": Configuring as keyboard
(II) XINPUT: Adding extended input device ""PMU"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
udev information:
P: /devices/virtual/input/input0/event0
N: input/event0
S: char/13:64
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: x11_driver=evdev
E: DEVLINKS=/dev/char/13:64
P: /devices/virtual/input/input1/event1
N: input/event1
S: char/13:65
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:65
E: x11_driver=evdev
P: /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2/event2
N: input/event2
S: char/13:66
S: input/by-id/usb-_USB_Keyboard-event-kbd
S: input/by-path/pci-0001:10:18.0-usb-0:1.1:1.0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR_ENC=\x20
E: ID_VENDOR_ID=05af
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=0802
E: ID_REVISION=0130
E: ID_SERIAL=_USB_Keyboard
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0001:10:18.0-usb-0:1.1:1.0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:66
/dev/input/by-id/usb-_USB_Keyboard-event-kbd
/dev/input/by-path/pci-0001:10:18.0-usb-0:1.1:1.0-event-kbd
E: x11_driver=evdev
P: /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input3/event3
N: input/event3
S: char/13:67
S: input/by-id/usb-_USB_Keyboard-event-if01
S: input/by-path/pci-0001:10:18.0-usb-0:1.1:1.1-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR_ENC=\x20
E: ID_VENDOR_ID=05af
E: ID_MODEL=USB_Keyboard
E: ID_MODEL_ENC=USB\x20Keyboard
E: ID_MODEL_ID=0802
E: ID_REVISION=0130
E: ID_SERIAL=_USB_Keyboard
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0001:10:18.0-usb-0:1.1:1.1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:67
/dev/input/by-id/usb-_USB_Keyboard-event-if01
/dev/input/by-path/pci-0001:10:18.0-usb-0:1.1:1.1-event
E: x11_driver=evdev
P: /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4/event4
N: input/event4
S: char/13:68
S: input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-event-mouse
S: input/by-path/pci-0001:10:18.0-usb-0:1.3:1.0-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=USB-PS_2_Optical_Mouse
E: ID_MODEL_ENC=USB-PS\x2f2\x20Optical\x20Mouse
E: ID_MODEL_ID=c00e
E: ID_REVISION=1100
E: ID_SERIAL=Logitech_USB-PS_2_Optical_Mouse
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0001:10:18.0-usb-0:1.3:1.0
E: x11_driver=evdev
E: DEVLINKS=/dev/char/13:68
/dev/input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-event-mouse
/dev/input/by-path/pci-0001:10:18.0-usb-0:1.3:1.0-event-mouse
P: /devices/pci0001:10/0001:10:17.0/input/input5/event5
N: input/event5
S: char/13:69
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0001:10/0001:10:17.0/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DEVLINKS=/dev/char/13:69
DRM Information from dmesg:
-- System Information:
Debian Release: squeeze/sid
APT prefers testing-proposed-updates
APT policy: (500, 'testing-proposed-updates'), (500, 'unstable'),
(500, 'testing'), (1, 'experimental')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.32-2-powerpc
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-r128 depends on:
ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib
ii xserver-xorg-core 2:1.7.5-1 Xorg X server - core server
xserver-xorg-video-r128 recommends no packages.
Versions of packages xserver-xorg-video-r128 suggests:
ii firmware-linux 0.23 Binary firmware for various driver
-- no debconf information
Attachment:
xorg.conf
Description: Binary data
Attachment:
xorg.glx
Description: Binary data
Attachment:
meminfo
Description: Binary data
Attachment:
lsusb
Description: Binary data
Attachment:
lspci
Description: Binary data
Attachment:
dmesg
Description: Binary data
Attachment:
df
Description: Binary data
Attachment:
cpuinfo
Description: Binary data